Hello,
I tried upload kernel with TWRP recovery to my phone (i had CWM) following tutorial on cyan wiki wiki.cyanogenmod. org/w/Install_CM_for_galaxysmtd
I did everything, after instalation i took out battery (every combination of buttons was booting phone normally), went to recovery and i still have CMW not TWRP. Why is that?
How can i install TWRP on this phone? On the official site there is no i9000
Related
Hi,
I flashed CF-Root-XW_DBT_JVI-v3.7-CWM3RFS, which worked fine and I have root access now.
But my problem - actually I dont know if its a problem - is:
I cannot boot into CWM Recovery using the 3button method.
I can successfully boot into CWM Recovery using the CWM Manager app.
The reason why I am asking:
I want to flash [ROM][ICS][4.0.3][BUILD23][BETA2.02]AOKP.
And in the instructions they are mentioning:
--COMING FROM STOCK ROMs/SAMSUNG BASED ROMS-
[..]
*WHILE FLASHING THE PHONE WILL END UP IN A BOOTLOOP, NO PROBLEM.
*SWITCH OFF BY REMOVING BATTERY.
*REBOOT INTO RECOVERY.
*REFLASH .
Click to expand...
Click to collapse
So I tried whether I can boot into CWM recovery using the 3-button method.
I saw on the CF-root thread for SGS2, that it only boots standard recovery, if there exists a samsung package (What is meant with package? firmware?).
But on the SGS thread chainfire writes:
- Booting into recovery will immediately give you CWM. The standard recovery is completely gone.
Click to expand...
Click to collapse
So I dont know if its an error, that I cannot boot into CWM with the 3button method,
or if its ok, because I still have the stock Samsung ROM running.
Thanks for your help!
Georg
I solved the problem. Maybe it helps someone.
I flashed AOKP Beta 2.02 and the SGS didnt end up in a boot loop!
It just booted into Semaphore CWM and from there I flashed AOKP again->Reboot->Finished.
During installation I had another problem: I put the AOKP zip onto the external/real SD-card. When the SGS booted into CWM after the first flash, the SD Card wasnt mounted But thanks god, the 3-button method still started the standard recovery mode, and I could reflash the original Samsung firmware using Odin.
I then re-rooted the phone and started the whole process again, but this time storing the AOKP zip on the internal SD-card
Friends.
I recently installed fde rom having cwm recovery version 3.0.2. When I tried to return to gdx 28b it gave me an error and I accepted roms option of restoring recovery and could boot to gdx. But now the issue is I don't find cwm recovery when I reboot. How do I reinstall cwm recovery without going back to stock rom?
anashiva said:
Friends.
I recently installed fde rom having cwm recovery version 3.0.2. When I tried to return to gdx 28b it gave me an error and I accepted roms option of restoring recovery and could boot to gdx. But now the issue is I don't find cwm recovery when I reboot. How do I reinstall cwm recovery without going back to stock rom?
Click to expand...
Click to collapse
Can you boot in ROM? If so, boot in Fde, grab x8toolbox, plug phone in pc, enable usb debugging, and install CWM or FreeXperia recovery. If you can't boot into Rom, then shut your phone off. Turn it on again, press the screen repedeatly. If CWM doesn't show up, turn your phone off again, start it, and press&hold the volume down button until FreeXperia recovery shows up. If nothing shows up, flashtool is there for flashing ftf of stock rom.
--
Press thanks if i helped
It is clasic problem of stock kernel.There is no way without re flashing with flashtool .
Solved. After trying many things, went back to stock and repeated everything till gdx28.
CWM for X8 Stock rom only, I meant as ur Original recovery u can't use CWM, only can XRecovery.....
I Saw that from web and I didn't believe it that time, so i installed CWM on a custom rom then it stucked at SE Logo.....
u only can use CWM come with custom roms, but some roms don't work it
Last 3-4 days I had been searching all over the net but couldn't make a solution. My GT-N7000 phone is running on stock ROM N7000ODDLSC_N7000DDLS6_INU (4.1.2). I want to install any custom rom like CARBON, CyanogenMOD, OmniROM, etc. So I followed following steps:
1. Rooted my phone with "Root_SuperSU.0.98-Busybox.1.20.2-signed.zip" from stock recovery.
2. Then faced a lot of difficulty in installing a custom recovery (CWM). (I went through ROM Manager....failed, downloaded recovery zip and img file both and tried to install through recovery and/or adb update....all failed
3. Later on I got a custom CWM recovery (temporary) "recovery-clockwork-4.0.1.5-galaxys2 (Temp).zip" and tried the folowing steps:
a. Wipping cashe partition, delvic cache, facory reset for installing new ROM
b. Installing zip from sdcard>select: "omni-4.4.2-20140313-n7000-NIGHTLY.zip"............then its giving status 7 error
4. Also I tried with CWM touch recovery but also same kind of error.
.................can anyone provide me any kind of solution????
Perhaps you need a newer clockwork mod version...
gesendet mit Tapatalk
rashedkhan said:
Last 3-4 days I had been searching all over the net but couldn't make a solution. My GT-N7000 phone is running on stock ROM N7000ODDLSC_N7000DDLS6_INU (4.1.2). I want to install any custom rom like CARBON, CyanogenMOD, OmniROM, etc. So I followed following steps:
1. Rooted my phone with "Root_SuperSU.0.98-Busybox.1.20.2-signed.zip" from stock recovery.
2. Then faced a lot of difficulty in installing a custom recovery (CWM). (I went through ROM Manager....failed, downloaded recovery zip and img file both and tried to install through recovery and/or adb update....all failed
3. Later on I got a custom CWM recovery (temporary) "recovery-clockwork-4.0.1.5-galaxys2 (Temp).zip" and tried the folowing steps:
a. Wipping cashe partition, delvic cache, facory reset for installing new ROM
b. Installing zip from sdcard>select: "omni-4.4.2-20140313-n7000-NIGHTLY.zip"............then its giving status 7 error
4. Also I tried with CWM touch recovery but also same kind of error.
.................can anyone provide me any kind of solution????
Click to expand...
Click to collapse
I can.
From stock recovery, install any of these kernels.
http://forum.xda-developers.com/showthread.php?t=1901191
Then reboot the phone back into the new recovery. and install this.
http://goo.im/devs/chasmodo/Asylum-Omni/n7000/kernel/raw_kernel_r4_j43.zip
Reboot into recovery again, and now install rom.
Keep in mind that the recovery of the galaxy note is build into the kernel.
installing 4.4 roms
try philz recovery its clean and easy
Azeazezar said:
I can.
From stock recovery, install any of these kernels.
http://forum.xda-developers.com/showthread.php?t=1901191
Then reboot the phone back into the new recovery. and install this.
http://goo.im/devs/chasmodo/Asylum-Omni/n7000/kernel/raw_kernel_r4_j43.zip
Reboot into recovery again, and now install rom.
Keep in mind that the recovery of the galaxy note is build into the kernel.
Click to expand...
Click to collapse
I can't install any recovery from my stock recovery. It shows E:/Error in /tmp/sideload/package.zip (Status 7). Again the cwm recoveries that are in *.img format requires my phone (GT-N7000) to start in fastboot mode. I don't know how to do that. Again I tried to install recovery from ROM Manager. The latest recovery is "ClockworkMod 6.0.4.3". But when i reboot into recovery....it wont start...after trying for sometime, shut down automatically.
rashedkhan said:
I can't install any recovery from my stock recovery. It shows E:/Error in /tmp/sideload/package.zip (Status 7). Again the cwm recoveries that are in *.img format requires my phone (GT-N7000) to start in fastboot mode. I don't know how to do that. Again I tried to install recovery from ROM Manager. The latest recovery is "ClockworkMod 6.0.4.3". But when i reboot into recovery....it wont start...after trying for sometime, shut down automatically.
Click to expand...
Click to collapse
So you didn't do what i said.
Go do it again.
Thankyou Azeazezar I could do it following your directed guide. I installed Omnirom Nightlies.
But now problem is, It's not rooted anymore. So i tried to root from the recovery again with "Root_SuperSU.0.98-Busybox.1.20.2-signed.zip" package. But now the SuperSU app does not start. It says:
"There is no SU binary installed, and SuperSU cannot install it. This is a problem!
If you just upgraded to android 4.3, you need to manually re-root - Consult the relevent forum for your device!"
rashedkhan said:
Thankyou Azeazezar I could do it following your directed guide. I installed Omnirom Nightlies.
But now problem is, It's not rooted anymore. So i tried to root from the recovery again with "Root_SuperSU.0.98-Busybox.1.20.2-signed.zip" package. But now the SuperSU app does not start. It says:
"There is no SU binary installed, and SuperSU cannot install it. This is a problem!
If you just upgraded to android 4.3, you need to manually re-root - Consult the relevent forum for your device!"
Click to expand...
Click to collapse
Just flash this zip in recovery.
http://download.chainfire.eu/supersu
This is my second attempt to install custom ROM and I failed... I did everything step by step and it doesn't work. Or it doesnt boot at all or it craches in recovery mode while installing update.
This time i used some nightly unofficial and it stoped installing in recovery :S This is so annoyng
I downloaded stock lastest from code support for my Samsung S5830 because obviously there is non stable version of custom ROM right now.
I do not advise to go over Android 2.3.6 for S5830 or you will burn down your phone system...
Bugeera said:
This is my second attempt to install custom ROM and I failed... I did everything step by step and it doesn't work. Or it doesnt boot at all or it craches in recovery mode while installing update.
This time i used some nightly unofficial and it stoped installing in recovery :S This is so annoyng
I downloaded stock lastest from code support for my Samsung S5830 because obviously there is non stable version of custom ROM right now.
I do not advise to go over Android 2.3.6 for S5830 or you will burn down your phone system...
Click to expand...
Click to collapse
What did you do exactly?
Viper The Ripper said:
What did you do exactly?
Click to expand...
Click to collapse
Rooted phone with SuperOneClick successfully
downloaded CWM recovery, custom ROM, google apps and newcamera.apk
puted in SD
entered recovery mode, hard reset options (wipe data + catche)
installed zip from SD (CWM recovery)
rebooted recovery
installation of custom ROM stoped with error code (7)
from there i wouldnt be able to boot system
then i used code support and downloaded firmware flash files for S5830
odin installed it but also wont boot up the phone
then i pissed off and took old polish firmware installed with odin, after that did hard reset and now phone is working on 2.3.6
Bugeera said:
Rooted phone with SuperOneClick successfully
downloaded CWM recovery, custom ROM, google apps and newcamera.apk
puted in SD
entered recovery mode, hard reset options (wipe data + catche)
installed zip from SD (CWM recovery)
rebooted recovery
installation of custom ROM stoped with error code (7)
from there i wouldnt be able to boot system
then i used code support and downloaded firmware flash files for S5830
odin installed it but also wont boot up the phone
then i pissed off and took old polish firmware installed with odin, after that did hard reset and now phone is working on 2.3.6
Click to expand...
Click to collapse
Ok now you are unrooted on your new polish right. So now root it with UniversalGingerbreadroot.zip (google it.) Flash an older version of CWM(5.0) through the stock recovery. Finally install a stable custom rom initially do not go for CM roms as for testing try some other stock based rom and if successful you can advance to CWM.
All the best.
Bugeera said:
Rooted phone with SuperOneClick successfully
downloaded CWM recovery, custom ROM, google apps and newcamera.apk
puted in SD
entered recovery mode, hard reset options (wipe data + catche)
installed zip from SD (CWM recovery)
rebooted recovery
installation of custom ROM stoped with error code (7)
from there i wouldnt be able to boot system
then i used code support and downloaded firmware flash files for S5830
odin installed it but also wont boot up the phone
then i pissed off and took old polish firmware installed with odin, after that did hard reset and now phone is working on 2.3.6
Click to expand...
Click to collapse
Here you'll find ROOT and CWM files to get ready your Ace, than you'll be able to install Customs STOCK Roms, CM7.x, CM9.x, CM10.x
Read carefully the threads in GT-S5830 Android Development section and follow the dev's instructions
PS: To get CM11.x you'll need to flash CWM6.x or TWRP
Hello, just bought an used i8190. Since last friday i have been trying to flash a custom recovery on this phone via Odin, but after i flash it returns to the default recovery on next boot.
Yes, i have unchecked the "Auto-reboot" option on Odin. I turn off the phone and then manually enter recovery but with no results. I rooted the phone pretty easily and installed both TWRP and CWM apps to flash from android, but they don't work either (twrp crashes always and CWM just gives me an error.
Mi baseband model is XXAll2
kernel is 3.0.31 [email protected] (root name seems weird)
I searched the forum and found similar cases with the baseband, but even so i haven't found a concrete solution.
I even flashed a new pre-rooted rom from this thread: https://forum.xda-developers.com/showthread.php?t=2030282
Mi compilation number has changed to XXAMG1 but the baseband remains the same. I can't flash a recovery whatever i try.
I hope someone can give me an answer, cause i really want to use this phone feautures to it's fullest
Update:
Somehow, i managed to flash CWM via it's app successfully. However, when i tried to flash the TWRP via zip all i got was a blank screen and the phone booted directly to Android. I had to reflash the cwm with the app. However, i tried flashing via odin the Lineage os 14 from novafusion and i got a bootloop, reflashed the old stock firmware and now my device works but the recovery doesn't, and can't even flash this time via the app.
I tried flashing via ODIN stock recovery and other recoverys and i still get the same result. I have downloaded some stock roms, but im afraid to flash them in case i end up in a bootloop and unable to access recovery still
Any clues?
Glass_Arcana said:
Update:
Somehow, i managed to flash CWM via it's app successfully. However, when i tried to flash the TWRP via zip all i got was a blank screen and the phone booted directly to Android. I had to reflash the cwm with the app. However, i tried flashing via odin the Lineage os 14 from novafusion and i got a bootloop, reflashed the old stock firmware and now my device works but the recovery doesn't, and can't even flash this time via the app.
I tried flashing via ODIN stock recovery and other recoverys and i still get the same result. I have downloaded some stock roms, but im afraid to flash them in case i end up in a bootloop and unable to access recovery still
Any clues?
Click to expand...
Click to collapse
Flash the stock rom as it will fix bootloops and bricked devices. Make sure to have the right ROM and flash it with Odin. The os may take longer on first boot and make sure to factory reset it as data may cause bootloops, then try flashing the recovery.
I flashed twrp 3.1.1 through Odin