Related
Dear All,
i am a super fan of MIUI and ensure that i use all the roms avaliable for my device Mi3. Recently, i used MIUI 8 China Alpha rom on my Mi3W (Indian Version). i was quite satified with the Alpha Rom but there were few concerns due to which i wanted to go back to Global Stable rom. So, i went to the forum where i downloaded the Mi3 fastboot rom (stable global version) and tried to implement it through Miflash application. It failed and i was forced to install the MIUI 8 China Alpha rom.
But i wanted to go back to the stock Kitkat global rom and tried many ways to ensure my handset is back to normal (as it came from MIUI when shipped).
Finally, i got the solution whcih i working perfectly and hence sharing with all the users whcih want to test the MIUI8 china rom (Alpha/Developer) but hesitate to use it due to issues.
One thing to mention here is "MIUI 8 rom for Mi3 is Marshmellow while the stock rom is on Kitkat with MIUI7. So, the internal partitions of the handset change when you upgrade from KITKAT to MARSHMALLOW. hence you can't go back to Stock stable rom (Kitkat).
This solution which i am mentioning now will enable you to go back to Stock stable rom on Mi3.
Step 1:- Download the rom from the link below
https://drive.google.com/open?id=0BzRaSHXRviYBMFhpU043NEdmR2M
Step 2:- unzip it with 7zip application and keep it in a folder
Step 3:- ensure your mobile is charged for atleast 60%
Step 4:- open Miflash application and put the rom path in it.
Step 5:- Put your phone in fastboot mode (shut down the phone and press volume down key and press power button
Step 6: connect your phone to computer and press the refresh buttion on Miflash
Step 7: Now your phone should be visible in the Miflash. If yes, ensure that you select the "flash all" button and press the flash button.
Now the installation of the rom will start and disconnect the cable once the miflash with say "Operation Successful"
Step 8: If the phone does not auto reboot then keep pressing the power button until the phone restarts.
Step 9: 1st Boot will take sometime and select the language etc to use it. then BINGO your phone is on KITKAT China stable Rom without google services.
Step 10: Download the MIUI stable rom (http://en.miui.com/download-101.html) from the MIUI website and use the phone updater to choose this Global MIUI rom.
Step 11: the phone will restart and the installation will start.
BINGO....you are finally on MIUI7 Global stable Rom with Google Apps.
Hope you are able to use this and get the desired results.
Enjoy and God Bless.
Actually its very simple..
Flash TWRP recovery from Flashr App...
Download stable zip ROM..
Go to recovery, wipe everything except sd card.. And flash the stable rom... And you are back to stable kitkat
Sent from my MI 3W using XDA-Developers mobile app
a.broken.star said:
Actually its very simple..
Flash TWRP recovery from Flashr App...
Download stable zip ROM..
Go to recovery, wipe everything except sd card.. And flash the stable rom... And you are back to stable kitkat
Click to expand...
Click to collapse
Actually it's not that simple because flashing a Marshmallow rom means altering the internal system partitions. In order to return to the stock rom you need to manually reverse the partition table to their factory default or do a fastboot flash.
Bomberus said:
Actually it's not that simple because flashing a Marshmallow rom means altering the internal system partitions. In order to return to the stock rom you need to manually reverse the partition table to their factory default or do a fastboot flash.
Click to expand...
Click to collapse
Its not required to reverse the partition table to kitkat format... MM merges the two system partitions and other partitions. And kitkat supports that merged partition
I myself is running miui kitkat on miui MM merged partition..
Just use TWRP.
Sent from my MI 3W using XDA-Developers mobile app
a.broken.star said:
Its not required to reverse the partition table to kitkat format... MM merges the two system partitions and other partitions. And kitkat supports that merged partition
I myself is running miui kitkat on miui MM merged partition..
Just use TWRP.
Sent from my MI 3W using XDA-Developers mobile app
Click to expand...
Click to collapse
How about lollipop roms? Now i'm on miui8 and i want to downgrade to flymeos lollipop, can I just flash the flymeos rom without downgrade to kitkat first?
farchanrifai said:
How about lollipop roms? Now i'm on miui8 and i want to downgrade to flymeos lollipop, can I just flash the flymeos rom without downgrade to kitkat first?
Click to expand...
Click to collapse
Of course, wipe in TWRP and flash it... I've tried that personally
Tomi_Ohl said:
Of course, wipe in TWRP and flash it... I've tried that personally
Click to expand...
Click to collapse
Bro i was wondering about this info you gave, btw do i wipe data, cache, dalvik and system as well? or just the the first three?
thanks in advanced, much appreciate.
PD: I am currently on 6.0.1 with merged partition and i want to install a miui kitkat or probably a lollipop rom but i'm afraid of bricking it after all the a partition is already merged so, i'm having second thoughts about flashing a lower android version...
a.broken.star said:
Its not required to reverse the partition table to kitkat format... MM merges the two system partitions and other partitions. And kitkat supports that merged partition
I myself is running miui kitkat on miui MM merged partition..
Just use TWRP.
Sent from my MI 3W using XDA-Developers mobile app
Click to expand...
Click to collapse
I am currently on 6.0.1 with merged partition and i want to install a miui kitkat or probably a lollipop rom but i'm afraid of bricking it after all the a partition is already merged so, i'm having second thoughts about flashing a lower android version...
so do i wipe data cache and dalvilk only or also system???
fernandoc1sg said:
I am currently on 6.0.1 with merged partition and i want to install a miui kitkat or probably a lollipop rom but i'm afraid of bricking it after all the a partition is already merged so, i'm having second thoughts about flashing a lower android version...
so do i wipe data cache and dalvilk only or also system???
Click to expand...
Click to collapse
I downgraded to miui kitkat and cm12.1 using the merged partition. In miui kk, it will have error but it will still flash if you see in the log the it was flashed (system, data, bla bla). In cm12.1, just flashed thru it no problems with gapps of coarse.
All I did was wipe data, nothing else.
Sent from my MI 3W using Tapatalk
asurabp said:
I downgraded to miui kitkat and cm12.1 using the merged partition. In miui kk, it will have error but it will still flash if you see in the log the it was flashed (system, data, bla bla). In cm12.1, just flashed thru it no problems with gapps of coarse.
All I did was wipe data, nothing else.
Sent from my MI 3W using Tapatalk
Click to expand...
Click to collapse
It worked succesfully, thanks for clarifying my doubts. <3
Hello i m using miui7 kitkat global version and now i want to flash latest version of miui rom, i have extanded partition and using twrp recovery, plz tell me what things should i need to do before flashing latest version of miui rom, or i can direct flash latest version of miui rom using twrp recovery
A year back I installed XZDualRecovery with a Lollipop ROM from xda. Now I want to update to resurrection remix for marshmallow. I wanted to know what is the path to follow?
Flash twrp 3.0+ (can I directly flash it on my current phone using twrp 2.8 on XZDualRecovery?).
and then the kernel?
THeLogiC said:
A year back I installed XZDualRecovery with a Lollipop ROM from xda. Now I want to update to resurrection remix for marshmallow. I wanted to know what is the path to follow?
Flash twrp 3.0+ (can I directly flash it on my current phone using twrp 2.8 on XZDualRecovery?).
and then the kernel?
Click to expand...
Click to collapse
You can flash RR rom using twrp 2.8 and if you want to update twrp then flash the twrp 3.0.2 zip after flashing the rom.You don't need to flash any other custom kernel on RR.It's stable.
Røbin said:
You can flash RR rom using twrp 2.8 and if you want to update twrp then flash the twrp 3.0.2 zip after flashing the rom.You don't need to flash any other custom kernel on RR.It's stable.
Click to expand...
Click to collapse
Thank you for your response. The rom is working perfectly.
Oneplus has Screwed a lot of things between 3.5.2 AND 3.2.6..!! I wanted to try newest version of RR released by Blackjubel. But had issues.
Took me 5 minutes figure out things and decided to share it here:
IMPORTANT POST..!!! READ..!!! Credit for firmware files to @davidxantos
For people coming from 3.5.2 or 3.2.6
I am making a very important post. This is meant for all those who are using latest community build of Oneplus 3 and want to try another rom. You will not be able to do so as the twrp you are using will not flash roms completely and the firmware of community build will not let you flash the latest build of twrp. So here is what you need to do.
READ CAREFULLY:
STEP 1 : Grab firmware for 3.2.6 from this link and flash. flashing this will BREAK your fingerprint sensor. WAIT read on.
https://drive.google.com/…/0ByD3oqJ_...0;/view…
STEP 2: Now flash latest twrp 3.0.2.1 . Now you are on the latest twrp.
STEP 3: Now Flash firmware for 3.2.4 from this link. YOU HAVE your finger print sensor back..!
https://drive.google.com/…/0ByD3oqJ_...0;/view…
Now you have the latest twrp again and also can flash anything you want to..!!
Thanks to Oneplus for screwing this..!
Thanks but 3. 2.6 files do not found
No link works!
Just go find another link if these here don't work ...
There is a thread with all official firmwares. Or just use Google.
Sent from my OnePlus 3 using Tapatalk
3.2.4 https://drive.google.com/file/d/0ByD3oqJ_uj0VWjVMbmZoZS1kejg/view
3.2.6 https://drive.google.com/file/d/0ByD3oqJ_uj0VZUFjblBSbEVNRGs/view?usp=sharing
XDA app screwed the links
I tried but i bricked the phone. I cani only restore with the Qualcomm tool but now im stuck on the oxygen 3.1.2 and every time that flash any rom or OTA i brick the phone
gelomc said:
I tried but i bricked the phone. I cani only restore with the Qualcomm tool but now im stuck on the oxygen 3.1.2 and every time that flash any rom or OTA i brick the phone
Click to expand...
Click to collapse
This is strange..
gelomc said:
I tried but i bricked the phone. I cani only restore with the Qualcomm tool but now im stuck on the oxygen 3.1.2 and every time that flash any rom or OTA i brick the phone
Click to expand...
Click to collapse
Could it be that your bootloader is now locked again after using the unbrick tool?
DavidXanatos said:
Could it be that your bootloader is now locked again after using the unbrick tool?
Click to expand...
Click to collapse
No it's unlocked i checked
---------- Post added at 08:39 PM ---------- Previous post was at 08:38 PM ----------
geekynoob said:
This is strange..
Click to expand...
Click to collapse
I know...
I was on 3.2.6 after the OTA. I installed TWRP 3.0.2.1 and re-rooted it. I then took a backup and proceeded to flash RR 5.7.4. Broken fingerprint scanner/home button.
First, does anyone know why this happens? Can it be fixed?
In the meantime, do we need to revert to 3.2.4 to be able to install other roms and not break the the fps/hb?
Can anyone point me to a TWRP flashable version of 3.2.4? <-- Got this, Thanks.
Thanks in advance.
Edit to add below
I did what was detailed in the OP from stock rooted 3.2.6. I flashed the 3.2.6 firmware from TWRP. Rebooted to bootloader. Flashed TWRP 3.0.2.1 via fastboot. Flashed 3.2.4 firmware from TWRP. FPS/HB broken.
Did I miss something?
Reflashed 3.2.6 firmware on a hunch. FPS/HB working again.
My goal is to get to RR 5.7.4 with a working FPS/HB. Any ideas?
Thanks again.
EdHicks said:
I was on 3.2.6 after the OTA. I installed TWRP 3.0.2.1 and re-rooted it. I then took a backup and proceeded to flash RR 5.7.4. Broken fingerprint scanner/home button.
First, does anyone know why this happens? Can it be fixed?
In the meantime, do we need to revert to 3.2.4 to be able to install other roms and not break the the fps/hb?
Can anyone point me to a TWRP flashable version of 3.2.4? <-- Got this, Thanks.
Thanks in advance.
Edit to add below
I did what was detailed in the OP from stock rooted 3.2.6. I flashed the 3.2.6 firmware from TWRP. Rebooted to bootloader. Flashed TWRP 3.0.2.1 via fastboot. Flashed 3.2.4 firmware from TWRP. FPS/HB broken.
Did I miss something?
Reflashed 3.2.6 firmware on a hunch. FPS/HB working again.
My goal is to get to RR 5.7.4 with a working FPS/HB. Any ideas?
Thanks again.
Click to expand...
Click to collapse
It's easy mate..
Flash rr and then flash the 3.2.4 fw.. As u have a good twrp now.. Simple..
geekynoob said:
Oneplus has Screwed a lot of things between 3.5.2 AND 3.2.6..!! I wanted to try newest version of RR released by Blackjubel. But had issues.
Took me 5 minutes figure out things and decided to share it here:
IMPORTANT POST..!!! READ..!!! Credit for firmware files to @davidxantos
For people coming from 3.5.2 or 3.2.6
I am making a very important post. This is meant for all those who are using latest community build of Oneplus 3 and want to try another rom. You will not be able to do so as the twrp you are using will not flash roms completely and the firmware of community build will not let you flash the latest build of twrp. So here is what you need to do.
READ CAREFULLY:
STEP 1 : Grab firmware for 3.2.6 from this link and flash. flashing this will BREAK your fingerprint sensor. WAIT read on.
https://drive.google.com/â?¦/0ByD3oqJ_...0;/viewâ?¦
STEP 2: Now flash latest twrp 3.0.2.1 . Now you are on the latest twrp.
STEP 3: Now Flash firmware for 3.2.4 from this link. YOU HAVE your finger print sensor back..!
https://drive.google.com/â?¦/0ByD3oqJ_...0;/viewâ?¦
Now you have the latest twrp again and also can flash anything you want to..!!
Thanks to Oneplus for screwing this..!
Click to expand...
Click to collapse
In short, we cannot flash official twrp via modified twrp? Can't we just flash 3.2.4 without flashing 3.2.6 firmware?
z31416 said:
In short, we cannot flash official twrp via modified twrp? Can't we just flash 3.2.4 without flashing 3.2.6 firmware?
Click to expand...
Click to collapse
Nice u will get a black screen..
geekynoob said:
Nice u will get a black screen..
Click to expand...
Click to collapse
Thanks for this. I'm about to flash 3.2.4 fw only.
Good thing I saw this thread.
So step by step procedure if we wamt to flash other roms are:
-reboot to recovery (modifoed twrp)
-wipe
-flash 3.2.6 fw via modified twrp
-flash/install official twrp.img
-flash 3.2.4 fw
-flash rom etc
-finally reboot?
i'm using multi rom with FOS 1.5.1 as primary and whenever i flash RR(Flashing 3.2.4 firmware before and after too) and custom rom, FPS/home button not recognised.
what am i doing wrong, although multirom does have individual space why cant the older firmware doesnt work. everything except the home button is working fine.
can anyone explain how it works.
z31416 said:
Thanks for this. I'm about to flash 3.2.4 fw only.
Good thing I saw this thread.
So step by step procedure if we wamt to flash other roms are:
-wipe
-flash 3.2.6 fw via modified twrp
-flash/install official twrp.img
-flash 3.2.4 fw
-flash rom etc
-finally reboot?
Click to expand...
Click to collapse
Modded twrp can be used to flash 3.2.6 or 3.5.2 oos.. Now if u want to go back.. Using the modded twrp flash the 3.2.4 files.. Just reboot recovery now flash non modded twrp as u have 3.2.4 files official twrp will work.. And then flash any rom u want..
green. said:
i'm using multi rom with FOS 1.5.1 as primary and whenever i flash RR(Flashing 3.2.4 firmware before and after too) and custom rom, FPS/home button not recognised.
what am i doing wrong, although multirom does have individual space why cant the older firmware doesnt work. everything except the home button is working fine.
can anyone explain how it works.
Click to expand...
Click to collapse
Multi rom cannot distinguish firmware files.. They are core files.. So fp won't work..
geekynoob said:
Multi rom cannot distinguish firmware files.. They are core files.. So fp won't work..
Click to expand...
Click to collapse
okay, so the developer have to include the firmware in their roms in future build, thats how it works, right?
and while experimenting i flashed OOS 3.2.4 firmware but FPS working fine in FOS 1.5.1. how come it is?
z31416 said:
Thanks for this. I'm about to flash 3.2.4 fw only.
Good thing I saw this thread.
So step by step procedure if we wamt to flash other roms are:
-reboot to recovery (modifoed twrp)
-wipe
-flash 3.2.6 fw via modified twrp
-flash/install official twrp.img
-flash 3.2.4 fw
-flash rom etc
-finally reboot?
Click to expand...
Click to collapse
This will do it. It's how I got going. I went from stock rooted 3.2.6 OOS to RR 5.7.4.
Thanks for putting to words for others.
green. said:
okay, so the developer have to include the firmware in their roms in future build, thats how it works, right?
and while experimenting i flashed OOS 3.2.4 firmware but FPS working fine in FOS 1.5.1. how come it is?
Click to expand...
Click to collapse
I've done a bit of Dev.. But i am not sure about ur statement.. .. And cm based roms don't have fw files.. Feel like a noob lol..
Hi. I want to install latest nougat version of Miui . I use customs since i got phone, it was on marshmallow. I haven't installed nougat, and now i don't know how to install it properly, without bricking device. I already bricked it, so im a little scared of installing miui. I have now ressurection rom with 7.2.9 firmware. Can i just install new miui rom? Or should i install marshmallow first, then nougat? Thanks for help.
Hi..
What twrp version you're using it currently..?, is it official or zcx..?, if official...i suggest you to switch to zcx twrp version for installing miui recovery rom. you can find and download it from here or original thread from here, after that you can flashing miui rom that based nougat version with standard procedure of installing rom as usually, wipe cache & dalvik, data and system then go install rom.zip. But just advice..just try using xiaomi.eu rom instead of official one..coz this rom already optimized for global used.
never wipe system!!!!!!!!
I have lineage OS 14.1 with f2fs.
What i need to do to install xiaomi.eu ROM ?
boc11 said:
I have lineage OS 14.1 with f2fs.
What i need to do to install xiaomi.eu ROM ?
Click to expand...
Click to collapse
I'd like to know this too, im not sure about that yet. Did anybody here tried installing miui by recovery without installing nougat earier?
shephart said:
Hi. I want to install latest nougat version of Miui . I use customs since i got phone, it was on marshmallow. I haven't installed nougat, and now i don't know how to install it properly, without bricking device. I already bricked it, so im a little scared of installing miui. I have now ressurection rom with 7.2.9 firmware. Can i just install new miui rom? Or should i install marshmallow first, then nougat? Thanks for help.
Click to expand...
Click to collapse
This is instruction from miui eu
How to update MI5 to Android 7.0 from Android 6.0:
- Install LATEST Android 6.0 release for MI5 6.11.10
- Install TWRP 3.0.2.3 or ZCX
- Reboot to new TWRP
- Install Android 7.0 release
- Reboot - Never wipe /system partition manually!
- Done
- In case of any issues, make factory reset via system settings
- For ROOT on Android 7.0 install SuperSU 2.79
---------- Post added at 04:16 PM ---------- Previous post was at 04:14 PM ----------
boc11 said:
I have lineage OS 14.1 with f2fs.
What i need to do to install xiaomi.eu ROM ?
Click to expand...
Click to collapse
i think just wipe cache, data, and system on twrp and make sure use ext4 for system, cache and data.
then just instal miui eu rom .
if error try reboot your phone to twrp again an flash miui eu rom.
I always do that from mokee or aicp or RR, and my phone just fine .
is that possible flashing stock rom with twrp? i tried few times and it failed
gkhnkndy said:
is that possible flashing stock rom with twrp? i tried few times and it failed
Click to expand...
Click to collapse
I've always updated miui via twrp and never had any trouble, only thing is i had to reflash twrp img and flash root zip.i download the update via official miui update app and then it reboot to twrp and install without issue
So, I tried everything, flashed the ROM based on OREO like 9.6.1.0 ended in bootlooping the device, also custom rom based on OREO doesnt work too, like pixel experience, LINEAGE, ETC
Other than OREO based, ROM based on NOUGAT works well, like MIUI 8.xxx or RR based on NOUGAT
Any idea why this happens?
codearm2 said:
So, I tried everything, flashed the ROM based on OREO like 9.6.1.0 ended in bootlooping the device, also custom rom based on OREO doesnt work too, like pixel experience, LINEAGE, ETC
Other than OREO based, ROM based on NOUGAT works well, like MIUI 8.xxx or RR based on NOUGAT
Any idea why this happens?
Click to expand...
Click to collapse
-Format data
-wipe
-use otg drive since format data delete everything
-flash firmware newest 8.5.10 minimum requirment for oreo
-flash rom
-flash gapps
-reboot
evanlocked said:
-Format data
-wipe
-use otg drive since format data delete everything
-flash firmware newest 8.5.10 minimum requirment for oreo
-flash rom
-flash gapps
-reboot
Click to expand...
Click to collapse
tried it all, still bootloop
codearm2 said:
tried it all, still bootloop
Click to expand...
Click to collapse
flash any miui dev rom beyond 8.5.10 using miflash
reboot once ...
flash twrp ...
push any oreo rom (ie. LOS 15.1) and gapps while in recovery ...
Install that rom and gapps ...
reboot to twrp ...
format data ...
reboot again to twrp ...
reboot to system ...
3Dota said:
flash any miui dev rom beyond 8.5.10 using miflash
reboot once ...
flash twrp ...
push any oreo rom (ie. LOS 15.1) and gapps while in recovery ...
Install that rom and gapps ...
reboot to twrp ...
format data ...
reboot again to twrp ...
reboot to system ...
Click to expand...
Click to collapse
not working
Flashed 8.5.10 rom, ended in bootloop
flashed the LOS 15.1 and GAPPS, still bootloop
so, any one?
codearm2 said:
so, any one?
Click to expand...
Click to collapse
Your custom recovery needs to be an Oreo version compatible, so you can install oreo based roms on it.
Try to update to early version.
Regards.
codearm2 said:
So, I tried everything, flashed the ROM based on OREO like 9.6.1.0 ended in bootlooping the device, also custom rom based on OREO doesnt work too, like pixel experience, LINEAGE, ETC
Other than OREO based, ROM based on NOUGAT works well, like MIUI 8.xxx or RR based on NOUGAT
Any idea why this happens?
Click to expand...
Click to collapse
try updating firmware and twrp and flash lazy flasher zip after rom instalation hope it fix . *Lazy Flasher zip is must
Steffanom said:
Your custom recovery needs to be an Oreo version compatible, so you can install oreo based roms on it.
Try to update to early version.
Regards.
Click to expand...
Click to collapse
already 3.2.3 version which I believe supports oreo rom
Tsuzan said:
try updating firmware and twrp and flash lazy flasher zip after rom instalation hope it fix . *Lazy Flasher zip is must
Click to expand...
Click to collapse
didnt work, still bootloop
codearm2 said:
so, any one?
Click to expand...
Click to collapse
so ... what last rom boot fine in your Mi5?
3Dota said:
so ... what last rom boot fine in your Mi5?
Click to expand...
Click to collapse
any nougat rom works well
tried flashed 8.5.10 rom, still bootloop
codearm2 said:
any nougat rom works well
tried flashed 8.5.10 rom, still bootloop
Click to expand...
Click to collapse
this is quite weird ... since if you install any nougat ... you'll sure receive OTA update to oreo (dev or stable) ...
why dont you take that OTA?
3Dota said:
this is quite weird ... since if you install any nougat ... you'll sure receive OTA update to oreo (dev or stable) ...
why dont you take that OTA?
Click to expand...
Click to collapse
yes, installing the OTA based on OREO update also cause bootloop happens
basically, anything OREO based, whether it's ota or flashing it manually through TWRP, ZCX TWRP, or Mi Flash cause bootloop
Have you wipe your internal partition?
I think we need to wipe all partition after installing firmware when come from nougat to Oreo, because Oreo have new vendor partition.
At least you should use twrp-3.2.1-1-gemini
Sent from my MI 5 using Tapatalk
codearm2 said:
not working
Flashed 8.5.10 rom, ended in bootloop
flashed the LOS 15.1 and GAPPS, still bootloop
Click to expand...
Click to collapse
Try reflashing latest twrp via fastboot (not from within twrp).
After wiping all partitions (also mount and wipe vendor) and formatting data, reboot to recovery before flashing the ROM to access the data partition correctly again.
Then also try to boot (would go with a custom ROM) without any gapps, mods or root first, to further center the problem.
What happens now?
Have the same problem
Try to install latest build via fastboot --> failed
Try to install miui nougat based work, ota update to oreo based -->bootloop
Also try to flash all included internal storage but the problem still occured
Any miui nougat based and aex mod 5.1 work fine in my phone
Install lazy flasher before installing anything like SuperSU...
masruri03 said:
Have you wipe your internal partition?
I think we need to wipe all partition after installing firmware when come from nougat to Oreo, because Oreo have new vendor partition.
At least you should use twrp-3.2.1-1-gemini
Sent from my MI 5 using Tapatalk
Click to expand...
Click to collapse
already wiped, still not working
Phil_Smith said:
Try reflashing latest twrp via fastboot (not from within twrp).
After wiping all partitions (also mount and wipe vendor) and formatting data, reboot to recovery before flashing the ROM to access the data partition correctly again.
Then also try to boot (would go with a custom ROM) without any gapps, mods or root first, to further center the problem.
What happens now?
Click to expand...
Click to collapse
flashed latest twrp via fastboot, also already wiped all partition included mount and wipe vendor, also formated the data and reboot first before flashing the rom, boot without any gapps, still it doesnt work
reysack said:
Have the same problem
Try to install latest build via fastboot --> failed
Try to install miui nougat based work, ota update to oreo based -->bootloop
Also try to flash all included internal storage but the problem still occured
Any miui nougat based and aex mod 5.1 work fine in my phone
Click to expand...
Click to collapse
yeah, practically the same with mine
brhnahmad05 said:
Install lazy flasher before installing anything like SuperSU...
Click to expand...
Click to collapse
tried, doenst work
codearm2 said:
flashed latest twrp via fastboot, also already wiped all partition included mount and wipe vendor, also formated the data and reboot first before flashing the rom, boot without any gapps, still it doesnt work
Click to expand...
Click to collapse
Puh, don't know.
Do you have an old backup of your efs partition lying around?
If so, try restoring that.
If that also doesn't help, I'm through with my math here, I think...
Flash a Lineage OS 14.1 build without GApps but with a firmware that supports Oreo. Then, go to developer settings, turn on ADB and run adb devices on your computer so that the RSA Fingerprint pops up. There, make sure you tap on remember this computer and click ok.
Now, do an update to Lineage 15.1 without wiping anything. As soon as you reboot your phone, connect it to your PC and try to get a logcat. Paste the logcat here and we'll be able to see what's actually going on.