Database Develop

Anyone can answer me:X1 boot Andriod usb connect to PC no driver???

Anyone can answer me:X1 boot Andriod usb connect to PC no driver??? I use Andriod PC display need install XDA dirvers? Anyone can share me this driver.tks.

As far as I know the drivers will still be in git tree for the kernel, and they were turned off in builds for some reason around May 2010.
Even if they were removed you can recover them by going to the correct time in git and checking out that branch.
http://gitorious.org/+kovsky-linux-msm/linux-on-qualcomm-s-msm/linux-msm-xdadev or a number of other branches.
I assume you want a USB TCP/IP network, this was working under Linux to Linux. I did not succeed in Linux to Android, but that does not say it cannot be done.

use Linux/Ubuntu OS - No Problems with USB ))) or u can run VMWare and run port of linux and usb will work too

You must use the SDK-Windows Drivers..
You can install from the Android SDK (you must select-> USB DRIVER).
regards,

we nbeed assistent for android my friend i find him but he is on chinese here is link try to use him that we need i hope that i help http://www.incredibleforum.com/foru...suite-windows-android-management-console.html

use DroidCommander
Upload/download file without cable (local wifi) and see logcat output via wifi too, download from capdroid.com

http://forum.xda-developers.com/showthread.php?t=924763

Incredible S kernel with USB host mode support

Guys, i've made a incredible s kernel which with USB host mode (OTG) support
It's based on XSKernel, so this kernel contains 1.8Ghz overclocking support, thanks to l0st.prophet very much !!!
I merged usb host mode patch from here:
http://sven.killig.de/android/N1/2.2/usb_host/
and made some bug fix and improvment for incredible s.
I test this kernel only on Froyo rom, i'm not sure whether this also works fine on gingerbread rom.. ^_^
It's not very perfect, while this is current status in my testing environment:
pros:
--------------------------------------
USB keyboard : works fine
USB mouse : works fine
USB printer : works fine
USB ethernet card : works fine
wifi : works ok
GPS : works ok
bluetooth : works ok
FM : works ok
USB charging and AC charging : works ok
cons:
--------------------------------------
usb device mode functions are disabled, like adb, usb tether ...
If I use USB flash disk / USB CDROM with usb host mode enabled,
Incredible S hangs (they use the same usb-storage driver)
I have no idea whether it's relative to my Incredible S phone, so it would be appreciated if you would like to try to use usb storage device ^_^
--------------------------------------
I've post a usb host mode patch and config file here:
vivo-usb-host.patch.zip
usb-host.config.zip
the patch seems to be a little big, cause i upgrade asix usb ethernet card driver, the original version doesn't works fine, enjoy it ~~~ ^_^
=====================================================
prerequisites:
1. a rooted S-OFF incredible S phone (of course )
2. a self-powered usb 2.0 hub (must always has self-power)
3. A micro USB B male to USB A female adapter/cable
(a USB female to female adapter and a micro USB cable also works ^_^)
steps:
1. use attached PG32IMG.zip to update IS kernel in fastboot
copy PG32IMG.zip to the root directory of sdcard, in fastboot mode,
you can just update it
2. unzip modules.zip, use RootExplorer or other tools to copy all *.ko module
files to:
/system/lib/modules
3. power up IS phone, connect IS phone to USB hub's upstream port,
connect some usb devices, connect usb hub's power, wait for the charging
LED lights
4. wait about 10 seconds, open a terminal emulator, load kernel modules:
Code:
cd /system/lib/modules
insmod usbcore.ko
insmod ehci-hcd.ko
# use USB input device
insmod usbhid.ko
# use USB printer device
insmod usblp.ko
# use USB ethernet card device
insmod mii.ko
insmod usbnet.ko
insmod asix.ko
# use USB mass storage device (flash disk and so on)
# this may cause IS phone hang, it's on your own...
insmod usb-storage.ko
There is a picture shows USB keyboard works fine in my IS phone, lol ~~
If usb mass storage device works fine or any other usb device doesn't works fine in your phone,
you can just post "dmesg" output here, thank you ~~~

That is pretty cool, nicely done! Can't try it out as I'm stuck with S-ON for now but it's a great idea and I hope you find time to develop it further and iron out the bugs.

does the camera and youtube works?

vontdeux said:
does the camera and youtube works?
Click to expand...
Click to collapse
Yep, camera works fine, wifi works fine, now adb functions are disabled
usb host mode functions almost works perfect

Are you sure camera and video works, cause the sources are for froyo and that breaks video on gb roms. If you've fixed it I'd love to know how cause its broken in XSKernel until HTC release the gb sources.
BTW, you need to post your sources for a kernel as it OS distributed under GPL, or the mods will have to take it down till you do, just a friendly warning.
Sent from my HTC Incredible S using Tapatalk

l0st.prophet said:
Are you sure camera and video works, cause the sources are for froyo and that breaks video on gb roms. If you've fixed it I'd love to know how cause its broken in XSKernel until HTC release the gb sources.
BTW, you need to post your sources for a kernel as it OS distributed under GPL, or the mods will have to take it down till you do, just a friendly warning.
Sent from my HTC Incredible S using Tapatalk
Click to expand...
Click to collapse
I test this kernel only on Froyo rom, camera and video works, i'm not sure whether this also works fine on gingerbread rom.. ^_^
And as you said, the kernel source is GPL licensed, i will post a patch which based on the HTC's released froyo source code - based on XSKernel may be much easier, lol ~~~

Ah fair enough, yes it works fine on Froyo, break on GB
Damn HTC... releasing 2.2 sources only.

arghh.. i was this close to try and flash it...
zzz HTC...cmon..update this!! release it for GB!! we need it badly...

Please help me with this I am interested not sleep for days I could not do a kind of sorry about my English bad typographical error would translate what I wrote might be.
I can not open kernel hangs after installing the rom does not turn on my phone several times but the recovery mode, open the CM7 I installed the new rom rom installed installed installed the old rom in the same results, please Can you give me a link to a rom that you can run with this kernel is running, or if you have a friend, if possible, upload a backup of full recovery can? Incredible S, but I can not make my phone .. please help I can not sleep anymore I put my head Thank you for your interest in advance.

Great! now how can we turn adb and usb tether back on?

Is there any way we can enable USB host mode on ICS

bhushangahire said:
Is there any way we can enable USB host mode on ICS
Click to expand...
Click to collapse
Check this thread by lost prophet. His kernel will include USB OTG and two way call recording in near future. Just check this thread often.
http://forum.xda-developers.com/showthread.php?t=1851121
Sent from my HTC Incredible S using xda app-developers app

Cyb0rgz said:
Check this thread by lost prophet. His kernel will include USB OTG and two way call recording in near future. Just check this thread often.
http://forum.xda-developers.com/showthread.php?t=1851121
Sent from my HTC Incredible S using xda app-developers app
Click to expand...
Click to collapse
Not working...

Cyb0rgz said:
Check this thread by lost prophet. His kernel will include USB OTG and two way call recording in near future.
Just check this thread often.
http://forum.xda-developers.com/showthread.php?t=1851121
Sent from my HTC Incredible S using xda app-developers app
Click to expand...
Click to collapse
bhushangahire said:
Not working...
Click to expand...
Click to collapse
Read carefully. It will be supported in a new version so keep checking the OP for updates.

qexing said:
Guys, i've made a incredible s kernel which with USB host mode (OTG) support
It's based on XSKernel, so this kernel contains 1.8Ghz overclocking support, thanks to l0st.prophet very much !!!
I merged usb host mode patch from here:
http://sven.killig.de/android/N1/2.2/usb_host/
and made some bug fix and improvment for incredible s.
I test this kernel only on Froyo rom, i'm not sure whether this also works fine on gingerbread rom.. ^_^
It's not very perfect, while this is current status in my testing environment:
pros:
--------------------------------------
USB keyboard : works fine
USB mouse : works fine
USB printer : works fine
USB ethernet card : works fine
wifi : works ok
GPS : works ok
bluetooth : works ok
FM : works ok
USB charging and AC charging : works ok
cons:
--------------------------------------
usb device mode functions are disabled, like adb, usb tether ...
If I use USB flash disk / USB CDROM with usb host mode enabled,
Incredible S hangs (they use the same usb-storage driver)
I have no idea whether it's relative to my Incredible S phone, so it would be appreciated if you would like to try to use usb storage device ^_^
--------------------------------------
I've post a usb host mode patch and config file here:
vivo-usb-host.patch.zip
usb-host.config.zip
the patch seems to be a little big, cause i upgrade asix usb ethernet card driver, the original version doesn't works fine, enjoy it ~~~ ^_^
=====================================================
prerequisites:
1. a rooted S-OFF incredible S phone (of course )
2. a self-powered usb 2.0 hub (must always has self-power)
3. A micro USB B male to USB A female adapter/cable
(a USB female to female adapter and a micro USB cable also works ^_^)
steps:
1. use attached PG32IMG.zip to update IS kernel in fastboot
copy PG32IMG.zip to the root directory of sdcard, in fastboot mode,
you can just update it
2. unzip modules.zip, use RootExplorer or other tools to copy all *.ko module
files to:
/system/lib/modules
3. power up IS phone, connect IS phone to USB hub's upstream port,
connect some usb devices, connect usb hub's power, wait for the charging
LED lights
4. wait about 10 seconds, open a terminal emulator, load kernel modules:
Code:
cd /system/lib/modules
insmod usbcore.ko
insmod ehci-hcd.ko
# use USB input device
insmod usbhid.ko
# use USB printer device
insmod usblp.ko
# use USB ethernet card device
insmod mii.ko
insmod usbnet.ko
insmod asix.ko
# use USB mass storage device (flash disk and so on)
# this may cause IS phone hang, it's on your own...
insmod usb-storage.ko
There is a picture shows USB keyboard works fine in my IS phone, lol ~~
If usb mass storage device works fine or any other usb device doesn't works fine in your phone,
you can just post "dmesg" output here, thank you ~~~
Click to expand...
Click to collapse
Hi,
As now HTC kernel source code is released can you please make USB host mode working with the latest code.
Or can you please help me out with what changes needs to be done or any pointers to work on it.
I really wanted USB host mode for incredible S.
Thanks

bhushangahire said:
Hi,
As now HTC kernel source code is released can you please make USB host mode working with the latest code.
Or can you please help me out with what changes needs to be done or any pointers to work on it.
I really wanted USB host mode for incredible S.
Thanks
Click to expand...
Click to collapse
As said earlier, it will be launched in near future. It takes some time for dev to made it possible. Added to that, It's already listed in future plan by lost prophet in his op. Be patient, surely you will get it

When I update PG32IMG.zip , after reboot my phone stuck on HTC Logo , and I have to re-flash with another boot.img
my rom is nik project x
is there anyway to use OTG USB on incredible s please?
it's very important to me,
thnx

[Kernel] KernelfoX (2015-05-26) - NFS / Samba / NTFS / Lirc

Features​
Code:
Enable loadable module support
- Module unloading
Forced module unloading
Multimedia Support
- Digital TV support
- DVB Network support
- Remote controller decoders
LIRC + all protocols
- Remote Controller devices
Windows Mediacenter IR
Loopback driver
Media USB adapters
- Dibcom DiB0700
File systems
- CD-ROM/DVD Filesystems
ISO9660 / UDF
- DOS/FAT/NT Filesystems
NTFS+write support
- Network File Systems
NFS v2/v3
CIFS + SMB2 + client caching
This is my first attempt at building an Android Kernel, last time I did it was for Ubuntu Gutsy, so please bear with me.
This is a stock AOSP kernel for Fugu, 3.10.20. All I did for now was a make menuconfig enabling some features I miss. I'm testing what I enabled, so far I've been able to mount an smb share from both windows 7 and my D-Link DNS-320 NAS running alt-f. Tried to mount nfs but it failed against my NAS. Haven't tested it yet with an NTFS formatted drive, will report back once I do. NFS mounting worked after I disabled SELinux enforcing, will try to figure what's needed to get it going without turning it off. I've been able to move apps to external storage using bind mounts over an ext2 formatted micro SD card, and on an NTFS formatted HD. This didn't work on a FAT formatted card, I'm mostly sure it's because of lack of extended attributes needed by SELinux.
All the features enabled on the kernel are built-in for now, but module loading is enabled in case you want to compile some.
I have a powered OTG USB hub, connected an old Microsoft MCE receiver and got the direction keys on the remote working, no other key worked, so I guess some kind of keymap is needed, will dig into it soon.
Also, I've built with support for my ISDB-T receiver (digital TV standard used in Japan and most of South America). It's seen by the kernel but fails to load firmware. My receiver is a Mygica S870, don't know how involved will be the process to get it working, it's not my main focus as I use it with a Raspberry Pi running tvheadend, but would be nice to get OTA tv on the nexus player with just an USB tuner. If you'd like me to add your tuner, let me know the HW / USB:ID.
For now, the kernel is provided as a zipped image, download, extract and test before flashing:
Code:
adb reboot bootloader
fastboot boot boot.kernelfox.img
If you decide to install it, you can do it with:
Code:
adb reboot bootloader
fastboot flash boot boot.kernelfox.img
or you can use TWRP to flash it. Remember, this is not an update zip, so you should copy the extracted .img file to your player (not the zip), and select Images... on TWRP to see it. There's a kernel.config file in the zip, it's what I used to build this one, if you want to try compiling it yourself, copy it as x86_64/.config on your git root.
I've been running it for the last few hours, but as my gf is using the player, I'm limited to testing from a remote adb. I'll be trying to build support for some type of unionfs for apps2sd, I'm evaluating the available options and would love suggestions about this, again, last time this was an issue for me was on the Motorola Milestone (ie Droid) days.

[Reserved]Really?

Since this is AOSP based, I'm assuming it won't work with CM?

Ambious said:
Since this is AOSP based, I'm assuming it won't work with CM?
Click to expand...
Click to collapse
I'm almost sure it shouldn't, but you can do a one time boot without flashing it, so I'd love to hear if it does. My player gets a lot of use here so I can't mess that much with it right now. I'm targeting rooted stock, as I really like it and would love it with just some tweaks.

@FaberfoX is this for 5.1.1

Toneman07 said:
@FaberfoX is this for 5.1.1
Click to expand...
Click to collapse
Yes, haven't had time to dig more into it, but I've been running it on LMY47V since I built it with no issues.

Thanks man going to flash it this week

[UPDATE] Remix Mini updated to Remix OS 2.0.626

We're back with an OTA update for 1GB and 2GB Remix Minis. Also, please know that if you are experiencing any type of streaming video issues, we've identified the problem, worked on a fix and are currently testing it now. If it passes, it'll be on the next update.
___________________________________________________
Remix OS on Remix Mini (1GB & 2GB) update version: 2.0.626
Release date: November 4, 2016
Release notes:
Updated Remix OS TV mode’s UI to the latest version.
IMPORTANT NOTE: For users who have NOT updated since version 2.0.307, all updates between 2.0.307 and 2.0.626 have been included. This is a critical update for the functions and usability of your Remix Mini. We strongly suggest you update to this version. This also means that this update may take a few minutes longer than regular updates.
__________________________________________________
Please continue to give us feedback here: http://support.jide.com/hc/en-us/requests/new
Thanks!

Do you have it as non ROM but as a firmware file to overwrite all partitions and have a fresh version of 2.0.626?
RemixOS_Jason said:
We're back with an OTA update for 1GB and 2GB Remix Minis. Also, please know that if you are experiencing any type of streaming video issues, we've identified the problem, worked on a fix and are currently testing it now. If it passes, it'll be on the next update.
___________________________________________________
Remix OS on Remix Mini (1GB & 2GB) update version: 2.0.626
Release date: November 4, 2016
Release notes:
Updated Remix OS TV mode’s UI to the latest version.
IMPORTANT NOTE: For users who have NOT updated since version 2.0.307, all updates between 2.0.307 and 2.0.626 have been included. This is a critical update for the functions and usability of your Remix Mini. We strongly suggest you update to this version. This also means that this update may take a few minutes longer than regular updates.
__________________________________________________
Please continue to give us feedback here: http://support.jide.com/hc/en-us/requests/new
Thanks!
Click to expand...
Click to collapse

How to exit TV Mode without restarting?
RemixOS_Jason said:
We're back with an OTA update for 1GB and 2GB Remix Minis. Also, please know that if you are experiencing any type of streaming video issues, we've identified the problem, worked on a fix and are currently testing it now. If it passes, it'll be on the next update.
___________________________________________________
Remix OS on Remix Mini (1GB & 2GB) update version: 2.0.626
Release date: November 4, 2016
Release notes:
Updated Remix OS TV mode’s UI to the latest version.
_______________________________________________
Click to expand...
Click to collapse
Can't find a way to close Tv Mode and back to normal desktop. How?

dinh_duy said:
Can't find a way to close Tv Mode and back to normal desktop. How?
Click to expand...
Click to collapse
press circle next to start button

kesmtk said:
press circle next to start button
Click to expand...
Click to collapse
Thanks. Gonna try it later.

Do you mean, you'd rather have a fresh copy of Remix OS on version 2.0.626 with none of your previous saved data and apps? Did you have your previous version rooted? I believe if you were just looking for a fresh start with the latest version of Remix OS, you can reboot your Mini, and then press F2 when prompted, and then do a factory reset. You may need to go through some updates, but I'm told you should restart in 2.0.626.
I hope this helps.
kesmtk said:
Do you have it as non ROM but as a firmware file to overwrite all partitions and have a fresh version of 2.0.626?
Click to expand...
Click to collapse

RM1C was rooted but unrooted cannot apply OTA
My device is RM1C. I Wanted to root on 2.0.512 version. but it autoupdated to some unstable version 2.0.622 with crashes after exiting fullscreen app. (I noticed there appeared an error messages on some missing file when connected via uart port. this is the message:
init: unknown magic init: unknown magic init: boost open /sys/devices/soc.0/cpu_budget_cool.16/roomage fail, No such file or directory!
init: boost open /sys/devices/soc.0/cpu_budget_cool.16/roomage fail, No such file or directory!
) but 2.0.512 was most stable version for me no errors on the uart also.
I rooted 2.0.622 version and allowed an app that I bought "gamecontroller2touch pro" to grant superuser permissions. It works as mapping xbox360 controller buttons to touch games like a charm, where a jide keymap does not support xbox360 it only works for keyboard input.
Then I saw a version for RM1C 2.0.627 was dowloaded in autoupdater. I unrooted and made system partition as it was. but it detects that the system was accessed as R/W and OTA update aborts with error 7.
I just wonder if the new version will not have that error that makes crash the desktop after exiting from fullscreen(as I found workaround to reutn to desktop after crash is to click xbox360 "back " button ). I have the incremental OTA for RM1C version 2.0.627 on usb, but cant install it . need reflash system.img.
RemixOS_Jason said:
Do you mean, you'd rather have a fresh copy of Remix OS on version 2.0.626 with none of your previous saved data and apps? Did you have your previous version rooted? I believe if you were just looking for a fresh start with the latest version of Remix OS, you can reboot your Mini, and then press F2 when prompted, and then do a factory reset. You may need to go through some updates, but I'm told you should restart in 2.0.626.
I hope this helps.
Click to expand...
Click to collapse

Got it. I remember your issue. I'm trying to work out 2 solutions for you:
1. Downgrade as you asked for. I'm waiting for the Chinese ROM team to give me the package and tutorial to be translated.
2. Flashing the Global (English) ROM into your Mini.
Do you prefer either/or? I'll respond still in private message to you about this.
Thanks!
kesmtk said:
My device is RM1C. I Wanted to root on 2.0.512 version. but it autoupdated to some unstable version 2.0.622 with crashes after exiting fullscreen app. (I noticed there appeared an error messages on some missing file when connected via uart port. this is the message:
init: unknown magic init: unknown magic init: boost open /sys/devices/soc.0/cpu_budget_cool.16/roomage fail, No such file or directory!
init: boost open /sys/devices/soc.0/cpu_budget_cool.16/roomage fail, No such file or directory!
) but 2.0.512 was most stable version for me no errors on the uart also.
I rooted 2.0.622 version and allowed an app that I bought "gamecontroller2touch pro" to grant superuser permissions. It works as mapping xbox360 controller buttons to touch games like a charm, where a jide keymap does not support xbox360 it only works for keyboard input.
Then I saw a version for RM1C 2.0.627 was dowloaded in autoupdater. I unrooted and made system partition as it was. but it detects that the system was accessed as R/W and OTA update aborts with error 7.
I just wonder if the new version will not have that error that makes crash the desktop after exiting from fullscreen(as I found workaround to reutn to desktop after crash is to click xbox360 "back " button ). I have the incremental OTA for RM1C version 2.0.627 on usb, but cant install it . need reflash system.img.
Click to expand...
Click to collapse

option 2 ; ) flash RM1C 2GB ram with RM1G firmware
..........option 2, I have pm'ed a message for you Thank You for help. :good:
RemixOS_Jason said:
Got it. I remember your issue. I'm trying to work out 2 solutions for you:
1. Downgrade as you asked for. I'm waiting for the Chinese ROM team to give me the package and tutorial to be translated.
2. Flashing the Global (English) ROM into your Mini.
Do you prefer either/or? I'll respond still in private message to you about this.
Thanks!
Click to expand...
Click to collapse

How and how long will this go on?
As a long time fan of Android-x86 I didn't really notice the Jide hardware until "The Merge"...
Now I see the Mini being sold off for half price and I wonder: Will it be obsolete on arrival?
I don't think I'd need Nougat on the device. I'd even think I'd be able to live with Lollipop.
But I can't operate a computer in my home network, that is unsafe to operate.
So I need the assurance that it will receive security updates until the end of its life cycle (3-5 years after purchase).
And I need the ability to control any computer I operate.
So will there be security updates until 2020?
Will you provide them or will you enable the community to provide them?
And will I be able to administer the system, de-activating services which have un-fixed vulnerabilities, blocking IPs, etc?
Generally that requires operating with root permissions on Linux systems, including those with an Android GUI.
$40 for a multi-media capable Linux systems running an attractive GUI is a great offer.
$40 for a potential IoT bot in my home network, which I can only throw away once somebody manages to subvert it, is a very bad investment, especially if it causes external damage.
So what will it be?
And will your future systems be any different?
BTW: Apart from 8 big desktops (Windows, Linux & Remix), 2 silent Atoms (Remix, Windows + Linux), 6 Notebooks (Windows, Remix & Linux), I operate 5 Android tablets and 10 Android phones (Canogenmod based Android, rooted by design).
Some of the PC hardware is 10 years old (3.4GHz Quad-Core Penryns work just fine with Nvidia GTX 1070), some of the Androids are still great after almost 6 years (e.g. Asus Eee Pad Transformer).
All of them run up-to-date operating systems with the latest patches. Typically not thanks to the vendor who produced the hardware but to the open source community which maintains Linux and Cyanogenmod.
If you treat the software on your hardware differently than Android-x86, you'll burn the brand very, very quickly.

usb boot
i have the remix mini rm1g with 626 is there a way to boot ubuntu via usb if i can boot into ubuntu can i install it and reinstall remix os on ubuntus root directory using grub customizer i know i can do that with remix os for pc

joeylikesubuntu said:
i have the remix mini rm1g with 626 is there a way to boot ubuntu via usb if i can boot into ubuntu can i install it and reinstall remix os on ubuntus root directory using grub customizer i know i can do that with remix os for pc
Click to expand...
Click to collapse
I don know, havent tried load linux on remix, I have rasbpberry pi and orange pi where they load everything from sd card.....remix mini loads from nand flash.
Maybe if you go to remix about screen and keep clicking build number to activate developer options.
Then dev options appear near about button in the options screen. Then enable usb debugging. select usb0 for debugging (the upper usb port)
install adb driver http://adbdriver.com/ . plug male - male usb cable PC-usb>remix upper usb port. Enter adb and enter root console. Maybe from root console it is possible to setup remix to load from sd card(where you linux kernel will be) by edidting uboot .

kesmtk said:
I don know, havent tried load linux on remix, I have rasbpberry pi and orange pi where they load everything from sd card.....remix mini loads from nand flash.
Maybe if you go to remix about screen and keep clicking build number to activate developer options.
Then dev options appear near about button in the options screen. Then enable usb debugging. select usb0 for debugging (the upper usb port)
install adb driver http://adbdriver.com/ . plug male - male usb cable PC-usb>remix upper usb port. Enter adb and enter root console. Maybe from root console it is possible to setup remix to load from sd card(where you linux kernel will be) by edidting uboot .
Click to expand...
Click to collapse
I don't think so. This is not a developer device, and not a traditional PC. It is a closed Android device (like Android phones and tablets), so would require custom bootloader/boot/etc. to loader other software. The Mini is made to show of Jide's bread and butter, their Remix OS software. They likely won't support officially installing any other 3rd party OS, since again, they are selling software and the hardware is incidental. Compared to the Raspberry Pi, which is open hardware designed for developing, and made to run various Linux releases and has broad support.

Now that it's EOL for the mini and no new updates are coming for it could we PLEASE have root?

4llerbuntu said:
Now that it's EOL for the mini and no new updates are coming for it could we PLEASE have root?
Click to expand...
Click to collapse
rooting easy, you must have uart to usb adapter. if you unscrew two screws under the rubber cover you will see 3 pins with GND tx and rx. Your usb to uart dongle shold have gnd tx and rx pins. 3,2 volt reading on the tx and gnd with multimeter. solder uart gnd pin to remix mini gnd. then uart tx to remix mini rx, and uart rx pin to remix mini tx. Open hyperterminal in windows. dial with com port setting 112500 none 8. and you have terminall root. from there you can cd to usb drive to install root

kesmtk said:
rooting easy, you must have uart to usb adapter. if you unscrew two screws under the rubber cover you will see 3 pins with GND tx and rx. Your usb to uart dongle shold have gnd tx and rx pins. 3,2 volt reading on the tx and gnd with multimeter. solder uart gnd pin to remix mini gnd. then uart tx to remix mini rx, and uart rx pin to remix mini tx. Open hyperterminal in windows. dial with com port setting 112500 none 8. and you have terminall root. from there you can cd to usb drive to install root
Click to expand...
Click to collapse
Looool:crying:
This is "easy"??
Seriously?
I always knew about this method. So there must be a reason I haven't tried it.
Anyways, id prefer rooting similar to what we have on numerous other Android devices, smartphones and TV boxes.
They usually don't require opening the device and a UART cable ......

re
4llerbuntu said:
Looool:crying:
This is "easy"??
Seriously?
I always knew about this method. So there must be a reason I haven't tried it.
Anyways, id prefer rooting similar to what we have on numerous other Android devices, smartphones and TV boxes.
They usually don't require opening the device and a UART cable ......
Click to expand...
Click to collapse
Well I had an old usb nokia adpter I tierd it appart and discoverd it has an uart interface with 3.2 volt communications sigal logic which is what is needed for remix mini. I soldered communications and boom I am as root user for remix mini . I copied supersu.zip and a instalation file from zip file inthe same foler. ran instalation file via sh command and root installed.
Maybe its possible to access root terminal from usb debugging.. I didnt try that.
You can install adb driver from adb.com. then click remix mini settings about. keep clicking version to get developer. enable developer. click settings menu again. click developer. click usb debuugging on. click usb0. then connect upper usb remix mini to pc usb. open pc cmd line and enter adb console. maybe from there you could do the stuff as root . I could

How do you install this? I'm currently on 2.0.203 and it says it fails trying to check for a new version. My internet is working fine though.

jbradshw said:
How do you install this? I'm currently on 2.0.203 and it says it fails trying to check for a new version. My internet is working fine though.
Click to expand...
Click to collapse
You must donwload phoenixsuit
https://www.dropbox.com/s/x7mnzui95c4459z/PhoenixSuit_EN_V1.0.8.msi?dl=0
adbdriver from
adbdriver.com
remix image
https://osdn.net/projects/remixos/downloads/66607/factory_image_rm1g_B2016110301-secure.img/
Warnining you will lose your all remix mini data.! games apps etc.
go to remix mini settings > abount. keep clicking on version number . the developer options will enable.
again go to settings>developer options > enable usb debuging , select usb0.
UNplug remix mini power cable.
Get a cliper and make a tool to push a "reset" button that is located in the hole in the back of remix mini. Try to for yourself by sticking cliper in the hole and feel the putton presses.
use usb MALE-MALE cable. connect remix mini upper usb port to laptop/PC usb.
I use windows 7 64bit
in laptop/PC:
1. Install the ADB tool
2. INstall PhoenixSuit. You will be guided through their installation instructions.
!let it autoupdate and restart it after updated
3. After the installation finishes, you can run PhoenixSuit by double-clicking the PhoenixSuit icon on the desktop.
4. Click ‘Firmware’ to enter the firmware flashing interface.
5. Click ‘Image’ to select the Remix OS img file.
!! click download one or multi partition to flash:
https://p5.zdusercontent.com/attach...Df0FXhMJxbcJLYkUku2_vQ.bLJYy1dgTWPhpfUCaIS3WA
6. Connect your Remix Mini to the PC via a USB-USB cable. NOTE: The cable must be plugged into the top USB port of remix mini.
7. Insert a straightened paperclip into the hole ar the back of your Remix Mini to press reset button.
8. while keeping clip inserted (reset button pushed) insert power cable to remix mini. Flashing image will start automatically, you can release the clicp holding reset button.
9. wait to complete, reboot mini.

Wow... what happened to the auto-update feature?

Kali Nethunter on Asus Zenfone Max Pro M1

Installing Nethunter
1. Download and install magisk module called KaliNethunter
2. Go to offensive security website and download generic arm64 nethunter image
3. Extract and install following apps from downloaded archive: NetHunter.apk, NetHunterTerminal.apk.
4. Extract kalifs-arm64-full.tar.xz on your phone.
5. Open NetHunter app and grant permissions and root permission
6. Open hamburger menu, select Kali Chroot Manager, select location where you had extracted kalifs-arm64-full.tar.xz and start installing chroot
7. Wait some time (~10 minutes)
8. Start chroot. Now you can use nethunter app and nethunter terminal app.
Enabling monitor mode on built-in wifi module
0. I could not enable it on custom roms. On stock 082 it worked, but there are some problems. Contact me if you have any info about enabling monitor mode on roms except stock.
1. Open nethunter app, go to custom commands
2. Click run on "Start wlan0 in monitor mode"
3. Now wlan0 is in monitor mode. I've tried capturing handshakes using airodump-ng, it worked. However, when I tried deauth attack using aireplay-ng, wlan0 was stuck on channel 0.
4. Note that if you turn wifi on/off or try to disable monitor mode, your phone will turn off.
5. Alternative way: you can enable monitor mode using other apps, like penmon. However, your phone will still turn off if you do anything to wlan0 while it is in monitor mode.
Using external wifi adapter
0. Your wifi adapter must support monitor mode. External adapter won't work without a kernel that supports it. I've built one based on darkonah (many thaks to @travarilo ). Atheros HTC based adpaters are not supported!
1. Flash the attached kernel (the latest version is NH_kernel_v2.zip).
2. Now you can use your exernal adapter.
Enabling monitor mode on external adapter
0. I only tested it with Alfa AWUS036NH (chipset ralink3070), but the instruction may be similar for other adapters
1. First, let's install firmware for your wireless adapter
Code:
apt update
apt upgrade
apt install firmware-ralink
2. Execute command iwconfig and check if your adapter is present there. For me it was displayed as wlan1
3. Turn your adapter off and put it into monitor mode
Code:
ifconfig wlan1 down
airmon-ng start wlan1
4. Check airmon-ng output. It will say you that your adapter is now in monitor mode and will give you new adapter's name (for me it was wlan1mon)
5. Now you can use monitor mode on your adapter (for example, to run airodump-ng)
P.S.: Do it at your own risk and don't use this info in illegal purposes. Only you are responsible for your actions.

Thank you very much sir! Really appreciate your work time and efforts!
Just one small query about what rom and firmware are you using?

Heven11 said:
Thank you very much sir! Really appreciate your work time and efforts!
Just one small query about what rom and firmware are you using?
Click to expand...
Click to collapse
Right now I'm using stock rom 082 (and fw 082, respectively), but it would be great if you tested this guide on any custom rom (if you are not going to use built-in wifi module. If you are, I recommend you to use stock rom)

Ok thank you!

tutaf said:
Installing Nethunter
1. Download and install magisk module called KaliNethunter
2. Go to offensive security website and download generic arm64 nethunter image
3. Extract and install following apps from downloaded archive: NetHunter.apk, NetHunterTerminal.apk.
4. Extract kalifs-arm64-full.tar.xz on your phone.
5. Open NetHunter app and grant permissions and root permission
6. Open hamburger menu, select Kali Chroot Manager, select location where you had extracted kalifs-arm64-full.tar.xz and start installing chroot
7. Wait some time (~10 minutes)
8. Start chroot. Now you can use nethunter app and nethunter terminal app.
Enabling monitor mode on built-in wifi module
0. I could not enable it on custom roms. On stock 082 it worked, but there are some problems. Contact me if you have any info about enabling monitor mode on roms except stock.
1. Open nethunter app, go to custom commands
2. Click run on "Start wlan0 in monitor mode"
3. Now wlan0 is in monitor mode. I've tried capturing handshakes using airodump-ng, it worked. However, when I tried deauth attack using aireplay-ng, wlan0 was stuck on channel 0.
4. Note that if you turn wifi on/off or try to disable monitor mode, your phone will turn off.
5. Alternative way: you can enable monitor mode using other apps, like penmon. However, your phone will still turn off if you do anything to wlan0 while it is in monitor mode.
Using external wifi adapter
0. Your wifi adapter must support monitor mode. External adapter won't work without a kernel that supports it. I've built one based on darkonah (many thaks to @travarilo ). Later I'll update this post to list adapters that should be supported by tis kernel.
1. Flash the attached kernel.
2. Now you can use your exernal adapter.
Enabling monitor mode on external adapter
0. I only tested it with Alfa AWUS036NH (chipset ralink3070), but the instruction may be similar for other adapters
1. First, let's install firmware for your wireless adapter
Code:
apt update
apt upgrade
apt install firmware-ralink
2. Execute command iwconfig and check if your adapter is present there. For me it was displayed as wlan1
3. Turn your adapter off and put it into monitor mode
Code:
ifconfig wlan1 down
airmon-ng start wlan1
4. Check airmon-ng output. It will say you that your adapter is now in monitor mode and will give you new adapter's name (for me it was wlan1mon)
5. Now you can use monitor mode on your adapter (for example, to run airodump-ng)
P.S.: Do it at your own risk and don't use this info in illegal purposes. Only you are responsible for your actions.
Click to expand...
Click to collapse
I love it when you put 0 first instead of 1. A true caffeine blooded being. Btw im on .087 fw ver (X00TDB var.). Gonna try the image out and see if internal wifi module works. Im running BT5 on my xp era machine.

ImperialNuggets said:
I love it when you put 0 first instead of 1. A true caffeine blooded being. Btw im on .087 fw ver (X00TDB var.). Gonna try the image out and see if internal wifi module works. Im running BT5 on my xp era machine.
Click to expand...
Click to collapse
What is BT5? I got it

does the kernel support atheros chipset: TL-WN722N v1?
ive done everything i could but my device still dont detect my adapter
...
apt update
apt upgrade
apt install firmware-atheros
airmon-ng... nothing..

xda_u$er said:
does the kernel support atheros chipset: TL-WN722N v1?
ive done everything i could but my device still dont detect my adapter
...
apt update
apt upgrade
apt install firmware-atheros
airmon-ng... nothing..
Click to expand...
Click to collapse
I had some problems building kernel, so I had to disable support for Atheros HTC based cards. You can try to add it as a loadable kernel module.
0. Flash the attached kernel, download and extract module file (ath9k_htc.ko) from zip
1. Go to NetHunter Terminal app and start androidsu shell
2. Go to the folder where you had extracted ath9k_htc.ko. For example:
Code:
cd /storage/emulated/0/Download
3. Install the module
Code:
insmod ath9k_htc.ko
If it throws error like "no such file or directory", check dmesg
4. Check if the module is installed
Code:
lsmod
You should see the name of the module (ath9k_htc) and its size (check attached screenshot)
5. Now try executing airmon-ng in kali terminal.
Module doesn't persist between reboots. Let me know if it works for you, I'll try to automate module installation process.

Throws me error..

xda_u$er said:
Throws me error..
Click to expand...
Click to collapse
Could you please execute dmesg command right after getting this error and show me the output?

its huge, so I put it in notepad

xda_u$er said:
its huge, so I put it in notepad
Click to expand...
Click to collapse
Sorry, my bad, I gave you the module for the previous kernel build (it has different name, that is why insmod throws error). Please try installing the attached module. If anything goes wrong, send me dmesg again.

@xda_u$er did it work?

Well, the installation went ok, but the external adapter its not working, it is not recognized by the device.

xda_u$er said:
Well, the installation went ok, but the external adapter its not working, it is not recognized by the device.
Click to expand...
Click to collapse
Sorry, I don't know what to do with that. You may try to find an old version (~2019) of TRB kernel, I've heard that its developer tried to enable Atheros HTC based adapters support.

Hii again! Your kernel is working amazingly good!and thanks to your guidance nethunter is working fine for me!
But I am unable to perform hid attacks are you able to do them? Like using our phone as a bad usb ! Does this also need kernel modification?

Heven11 said:
Hii again! Your kernel is working amazingly good!and thanks to your guidance nethunter is working fine for me!
But I am unable to perform hid attacks are you able to do them? Like using our phone as a bad usb ! Does this also need kernel modification?
Click to expand...
Click to collapse
As far as I know, it does. I haven't tried any usb attacks, but I'm going to.

Heven11 said:
Hii again! Your kernel is working amazingly good!and thanks to your guidance nethunter is working fine for me!
But I am unable to perform hid attacks are you able to do them? Like using our phone as a bad usb ! Does this also need kernel modification?
Click to expand...
Click to collapse
I've enabled everything that should be enabled to make bluetooth attacks work, but they don't. The adapter is recognized by the system, but nethunter app doesn't see it. I would be very thankful if you tested bluetooth with new kernel. Btw, usb attacks work with new kernel too. I've tried launching firefox on my PC, it worked. This is a really cool thing

Firstly sorry for late reply! I had to reset my device since I was testing some android 11 rom and Thank you sooooo much for V2 of this kernel,usb/hid is working like a charm but I haven't tried bluetooth yet but will definitely try it soon since I don't know how to do it!
Please continue the development of this kerneland remember you are a legend!
Thank you again!

Hii! I want to try Kali nethunter on my device but there are many bugs that I am facing my internet is not working in Kali not monitor mode is working!
Can you please make a nethunter ROM!please
Or give me a backup of your ROM KERNEL AND FIRMWARE THAT I can flash through TWRP !
Please!
PS. Currently I am using Android 10 corvus os and nethunter is not working!