Related
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
If you can get into download mode (power off, hold V+/V-, insert USB), you can try flashing a ROM via Heimdall. Apex 12.5 has a package you can flash from Heimdall.
You can also try Mosaic 9, as that has an Odin-based installer package.
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
yes you can, use the link below and download any of the latest rom with bootloader based on odin.
http://forum.xda-developers.com/showthread.php?t=1300843
Galaxy Grand Bricked
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
KrisjNoel said:
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
Click to expand...
Click to collapse
Read above, the answer was given.
http://forum.xda-developers.com/showthread.php?t=1300843
same problem but on a different device its gt-i9070 by samsung I download ROMs already but cant flash them there is absolute no custom recovery for this model tried anything and everything on google and xda , any solution to apply ROM not using recovery
Is this file can use to flash i9300??? Where can i get custom rom for gt-i9300 that flash via odin...bcoz my s3 also cannot boot to recovery mode to hard reset
Hey,
I'm using samsung galaxy star s5282. I rooted this phone 2 days ago. Everything went good until today when i was i my class it suddenly switched off. When i rebooted it, it hang on the samsung logo.
I tried to boot into cwm recovery mode by pressing v+, home, power but it boots into default system recovery mode.
I again flashed cwm recovery many times using odin but it dosent work. Odin shows pass but when i reboot my phone in cwm recovery mode my phone enters in default system recovery mode.
What should i do please please please help.....
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
applies to all recoveries
cheers
bhavnoor singh
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
Surenda 1863,
I had exactly the same problem and it took me almost one week of fiiddling and searching the Web to solve it.
The solution was in front me since day ONE : install ODIN on the PC !
In my case, I had I had accidentally wiped out the stock ROM and the tablet was hopelessly frozen on the download mode. I couldn't turn it off to boot it back with any of the usual buttons ( Volume , Home, Power)
I made the wrong assumption that since my PC didn't see the tablet, it couldn't connect to Odin either . I was wrong!
Here is what you have to do:
1. Install Odin on your PC. Connect the tablet to it. You will see that Odin sees the tablet because there will be a caption saying "added" on the top left.
2. Press the AP tab button at the right to go to the location where your Stock ROM is. The stock ROM file will have an MD5 ending.
3 Once the file is loaded (next to the AP button) just press Start. You will see the DOWNLOAD bar gradually filling up on the tablet and at the top left of ODIN.
4. When the operation is terminated, you will see a caption " PASSED" at the top left of he Odin screen and the tablet will automatically boot up to the HOME screen.
As simple as this! I didn't even have to worry about flashing the TWRP ( or CWR) recovery system, probably because the OS ROM was already wiped out. May be your case is different. I only know that in my case it worked like a charm.
Ittiandro
i had flashed a cm 12.1 in my mi3(cancro) and last day i downloaded an update and let it update, but the phone is just stuck at the mi logo, and not rebooting. i cant enter the stock recovery using the up volume button and power button. please someone help me :\
Hello,
Welcome to XDA.
To better assist you, your thread will be moved to your device Q&A forum linked below.
http://forum.xda-developers.com/xiaomi-mi-3/help
The experts there may be able to help you. Good luck.
Hello, can you access Fastboot on your device? If so, I would suggest to flash stock rom using MiFlash and you should be fine.
Hold volume up + power button for longer time, even after you see mi logo. If it does not enter into recovery, try fastboot.
Just boot The phone in fastboot, copy The file you want to keep in the pc and then install a fastboot rom
I just unlock my boot-loader and flash twrp recovery of MEIZU MX4 in MEIZU m2 by mistake then after I cant boot. I have tried all possible button combination but can't boot, just showing black screen , no logo and nothing. PLEASE HELP ME VERY URGENT.
Try :
Flash stock boot.img and twrp twrp_2.8.7.0.img for Meizu m2 via fastboot
Turn off the phone until it completely dies
Press and hold ( vol + & power ) to enter recovery mode
Copy stock rom Meizu m2 mini.zip to internal mmc
Wipe factory reset
Install a stock rom.zip
Good luck.
hello,
I flashed my gionee m2 using SP_Flash_Tool_v5.1524 ( format all + download, also tried firmware upgrade)
Gionee M2 JB 4G 0101 T5163
it showed success.
when I connect my gionee m2 (4gb) to a computer using usb, it is in boot loop.
it shows the gionee logo and restarts itself.
when I remove the usb, it still continues the boot loop.
I remove the battery and the power goes off.
Then, I click the power button and it doesn't power up.
I click volume down + power button, it doesn't power up.
I click volume up + power button, it doesn't power up.
I charged it for more than an hour. So, I think there is charging in the battery.
I replaced the recovery.img with carliv recovery
http://forum.xda-developers.com/showthread.php?t=2703141
and flashed again using sp flash tools (format all + download)
it showed green ring.
I tried again to power on, no response.
when I connect to USB, it powers on and starts boot loop
please suggest how to recover from the boot loop and make the phone working again.
Thanks
ravikum said:
hello,
I flashed my gionee m2 using
Gionee M2 JB 4G 0101 T5163
it showed success.
when I connect my gionee m2 (4gb) to a computer using usb, it is in boot loop.
it shows the gionee logo and restarts itself.
when I remove the usb, it still continues the boot loop.
I remove the battery and the power goes off.
Then, I click the power button and it doesn't power up.
I click volume down + power button, it doesn't power up.
I click volume up + power button, it doesn't power up.
I charged it for more than an hour. So, I think there is charging in the battery.
please suggest how to recover from the boot loop and make the phone working again.
Thanks
Click to expand...
Click to collapse
try flashing another stock ROM (there are many versions)
Replace the recovery.img in the stock ROM folder with the CTR (carliv recovery)
then use SP Flash Tool v3.1344.212 and flash ur phone
obviously you''ll lose all the the /system and /data partitions (any existing data)
there are various tutorials in the gionee m2 sections to see how to flash stock rom
http://firmwarefile.com/gionee-m2 -> get firmware from here
http://forum.xda-developers.com/showthread.php?t=2703141 -> carliv recovery
https://www.youtube.com/watch?v=5CxDF2pkdCQ -> fllashing from SP
Hi, thanks for your reply.
can I use latest sp flash tools instead of SP Flash Tool v3.1344.212 ?
you can use the latest version, when i flashed my M2 (8gb, stock rom) with it, it worked perfectly, but its HIGHLY recommended that you use SP 3.1344
I'm unable to boot into recovery mode
I have successfully flashed TWRP using ADB Minimal CMD.
I have already tried accessing TWRP using Vol. + And Vol - buttons, no response.
Mobile specifications:
1) Lenovo A6000+
2) kitkat 4.4.4(Vibe UI)
Umearmd said:
I'm unable to boot into recovery mode
I have successfully flashed TWRP using ADB Minimal CMD.
I have already tried accessing TWRP using Vol. + And Vol - buttons, no response.
Mobile specifications:
1) Lenovo A6000+
2) kitkat 4.4.4(Vibe UI)
Click to expand...
Click to collapse
Don't flash twrp
Flash cwm as it works fine on kitkat
Hi, could you please provide me the link for CWM recovery
Lenovo A6000+ unable to boot
I'm unable to boot into recovery mode
I have successfully flashed TWRP using ADB Minimal CMD.
I have already tried accessing TWRP using Vol. + And Vol - buttons, no response.
Mobile specifications:
1) Lenovo A6000+
Update lenovo to lolipop
stuck in recovery mode..
Hey.I flashed twrp and when I boot to recovery mode it only show lenevo logo... But phone is not bricked. And factory reset I not done..plxzzz help???
abhaycool said:
Hey.I flashed twrp and when I boot to recovery mode it only show lenevo logo... But phone is not bricked. And factory reset I not done..plxzzz help???
Click to expand...
Click to collapse
Press and hold both volume +/- and power button some time after release
somnath pal said:
Press and hold both volume +/- and power button some time after release
Click to expand...
Click to collapse
not working as it is stuck on logo
tried erasing recovery still not working
not able to boot into recovery
what to do ?
tried factory reset and it is not working
Try booting into download mode and boot into TWRP/CWM instead of installing
The best solution (valid for me with the same problem):
Download the TWRP-3.0.2 recovery, from https://forum.xda-developers.com/le...ecovery-twrp-3-0-2-lenovo-a6000-plus-t3543596
Copy the TWRP-3.0.2-Lenovo-A6000x32.img to the fastboot.exe folder in your PC
Turn off your phone, combine power + vol (-) to enter fastboot
Connect your phone to the PC, wait until it recognizes it.
In the PC, run a cmd prompt, and go to the fastboot.exe folder
type " fastboot flash recovery TWRP-3.0.2-Lenovo-A6000x32.img "
type " fastboot reboot "
Now, you can run the recovery. For me, worked with power + vol (-) + vol (+).
In recovery, connect to the PC via USB and copy to the internal memory the following rom: https://forum.xda-developers.com/lenovo-a6000/development/cm11-lenovo-a6000-plus-bugs-fixed-t3163636
Do a full wipe (I did it even the data partition)
Install the rom via install
Wait a few minutes until the phone boots.
Done!
abhaycool said:
Hey.I flashed twrp and when I boot to recovery mode it only show lenevo logo... But phone is not bricked. And factory reset I not done..plxzzz help???
Click to expand...
Click to collapse
try flashify to install a custom recovery like twrp
Megala
I did it
Flash TWRP recovery for KitKat. Don't flash the latest version as it will not work on KitKat (based on my experience).
Search and look for TWRP for KitKat, flash it and you're good to go.
Cheers!
remote:dtb failed how to slove
Umearmd said:
I'm unable to boot into recovery mode
I have successfully flashed TWRP using ADB Minimal CMD.
I have already tried accessing TWRP using Vol. + And Vol - buttons, no response.
Mobile specifications:
1) Lenovo A6000+
2) kitkat 4.4.4(Vibe UI)
Click to expand...
Click to collapse
twrp sevenmarx( from russia with love ) and onwards dont work with KK.
grab the right version of recovery from the cm11 thread by ( by ED300)
flash through adb and voila u r sorted
Hi,
I've got Lenovo a6000 plus
i rooted my phone using twrp and installed a custom rom called resurrection remix marshmellow version. Recently I saw the new nougat update for the phone and downloaded it. Then I went into the recovery mode and wiped out all the data including the rom os then by mistake switched off my phone. now when i start the phone i get stuck with the boot loop and i am unable to go to the recovery mode but i am able to go to the download mode. and the sad part is that usb debugging mode is disabled. anyone there to help? i need to go to recovery mode. What shall i do? reply me ASAP
rahulamresh said:
Hi,
I've got Lenovo a6000 plus
i rooted my phone using twrp and installed a custom rom called resurrection remix marshmellow version. Recently I saw the new nougat update for the phone and downloaded it. Then I went into the recovery mode and wiped out all the data including the rom os then by mistake switched off my phone. now when i start the phone i get stuck with the boot loop and i am unable to go to the recovery mode but i am able to go to the download mode. and the sad part is that usb debugging mode is disabled. anyone there to help? i need to go to recovery mode. What shall i do? reply me ASAP
Click to expand...
Click to collapse
use the Download mode to install your recovery, then from the recovery, install your rom.
rahulamresh said:
Hi,
I've got Lenovo a6000 plus
i rooted my phone using twrp and installed a custom rom called resurrection remix marshmellow version. Recently I saw the new nougat update for the phone and downloaded it. Then I went into the recovery mode and wiped out all the data including the rom os then by mistake switched off my phone. now when i start the phone i get stuck with the boot loop and i am unable to go to the recovery mode but i am able to go to the download mode. and the sad part is that usb debugging mode is disabled. anyone there to help? i need to go to recovery mode. What shall i do? reply me ASAP
Click to expand...
Click to collapse
Many people try to enter recovery by pressing vol +,- and power button at same time,but don't do like that, press continously begin from vol +,do continous but quickly,let's try,
My Phone is not booting into recovery(lenovo A6000)
Last time when i booted into recovery i cleared cache and dalvik bcause i had to install lineage os 15.1 android oreo then i switched of the phone it is not booting into recovey im stuck pls help me it is only showing the boot screen pls tell me what to do fastboot is working