hidden.img error when flashing stock room by odin - Galaxy Note5 Q&A, Help & Troubleshooting

<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> cm.bin
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
1. Tried to delete the "hidden.img" in the TAR file, problem still persisted.
2. TWRP wipe data, problem still persisted.
Can anyone please help?:crying:

aNxie1y said:
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> cm.bin
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
1. Tried to delete the "hidden.img" in the TAR file, problem still persisted.
2. TWRP wipe data, problem still persisted.
Can anyone please help?:crying:
Click to expand...
Click to collapse
Download the latest stock firmware for your device model, and extract from it the file called hidden.img, rename that file as hidden.img.tar Now open Odin and try to install the firmware you downloaded, when you see the error in Odin, load the file hidden.img.tar on AP and flash it. Now turn on the phone and wait around 5 minutes, it should boot up.
Please note that this will only work if the error shown in Odin is:
hidden.img
FAIL!

Related

SoftBrick, can't return to stock firmware

Hi,
After a SoftBrick, I try to reset my P1000 GSM with overcome stock guide but it fail.
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.rfs
<ID:0/003> dbdata.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003> movinand.mst
<ID:0/003> param.lfs
<ID:0/003> Sbl.bin
<ID:0/003> zImage
<ID:0/003> hidden.rfs
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)​
And then my P1000 rebout to "SoftBrick Download Mode"
What do you mean as "SoftBrick"? Technically, no "soft brick" exists, there's just one kind of brick when the bootloader is corrupted (and this isn't your case). Have you tried to use Heimdall?
hi, i can ask you a guide to restore my tab to stock rom? now i have cyanogen
thank you

Error when trying to flash back to stock with Odin

Everytime I try to flash it with odin, it gets to system.img.ext4 and then fails. Here's my log:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried 2 different USB cords and neither one has worked. Any help would be appreciated!
Jayden82 said:
Everytime I try to flash it with odin, it gets to system.img.ext4 and then fails. Here's my log:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried 2 different USB cords and neither one has worked. Any help would be appreciated!
Click to expand...
Click to collapse
A little more phone info would get you more replies.
dirtydodge said:
A little more phone info would get you more replies.
Click to expand...
Click to collapse
Completely forgot to take this post down, but I actually fixed it by using a partition I found on here.
Jayden82 said:
Completely forgot to take this post down, but I actually fixed it by using a partition I found on here.
Click to expand...
Click to collapse
am having same problem... how did you fix it???
How to Fix
John6Cena said:
am having same problem... how did you fix it???
Click to expand...
Click to collapse
http://forum.xda-developers.com/att...x-samsung-s5-att-sm-g900a-lollipop-5-t3305497

Softbricked SM-G900A Help me pls.

When i tried to unbrick my phone in odin i get this error:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

I can't flash my N920G - Odin error Stock Rom

Help please! I can't flash a stock rom with odin. Any idea?
Unlock OEM---Ok
Usb Debugging---Ok
Localization service disable---Ok
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hi, can you solve that? I´m having same issue with my 920g.
I´m trying to flash lastest India firmware (chagelist 635*****) on my TTT 920G (changelist 578******) so, can´t figure what´s the problem.
Ok, I think India firmware is corrupted or something like that
solution for the FAIL in Odim ??????
i use TTT 5.1.1 and how install 5.1.1 Nepal or India ??? for after update 6,0,1 ota

Help with S6

ho, i have a S6 from att g920a, i do a factory reset and dont start any more, only see the first screen "S6" and reboot constantly, turn on only if its connected to the charger, already try to flash with odin but not lucky, THANKS!!!
this is with odin 3.10.7
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> param.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
latest firm OJ7
THANKS!!!

Categories

Resources