Hello,
I bought Mi5 - 3/64GB phone from Aliexpress. When I got it, I didn't tried to connect it to internet or insert SIM card. I just took Mi Pc suite, and updated it to MIUI 8 version. After that everythink looked OK. Then I inserted SIM card with data enabled, my phone suddenly connected to internet and blocked up. Now I only see the picture I attached.
This is not my Mi account, I can't use phone at all. Can't access menu, turn on developer options or even use updater.
Phone is locked.
Recovery (Sound up+power) doesn't enter anywhere, only black screen with phone.
Bootloader works ok.
When pluged to pc, can't send any files to phone through USB cable.
I tried unbick methods (can't post link as a new member), with all ROM versions. It only updates to Xiaomi Mi5 Global stable. Other versions doesn't update, only gives me some kind of chinese error.
Maby someone had this issue ?
Attached photo
It looks like you got a Mi5 with a unofficial Rom and lots of bloatware.
With the guide in miui forum i tried to load a official rom, but it didn't work.
Instead my Mi5 is bricked now. Unable to get in the recovery mode, only into fastboot. I even got the unlock code
easily but couldn't my PC won't connect to the Mi5.
use this method to flash MIUI 8 Global version
skip the miflash tool,... extract everything using 7zip,... move files to root directory example C:\miui8
connect phone into fastboot mode and run flash_all.bat
First boot takes a lot of time...
chiragkrishna said:
use method to flash MIUI 8 Global version
skip the miflash tool,... extract everything using 7zip,... move files to root directory example C:\miui8
connect phone into fastboot mode and run flash_all.bat
First boot takes a lot of time...
Click to expand...
Click to collapse
This method doesn't work. When I press flash_all.bat CMD window appears for half a second and then disappears with no reaction. (Tried run as administrator also)
rokasb said:
This method doesn't work. When I press flash_all.bat CMD window appears for half a second and then disappears with no reaction. (Tried run as administrator also)
Click to expand...
Click to collapse
There shouldn't be any spaces in the path...
Best place is extract in C:/miui8
chiragkrishna said:
There shouldn't be any spaces in the path...
Best place is extract in C:/miui8
Click to expand...
Click to collapse
I extracted to C:\MIUI8
rokasb said:
I extracted to C:\MIUI8
Click to expand...
Click to collapse
Is there any service center near your place? They ca help you unlock in couple of minutes
rokasb said:
I extracted to C:\MIUI8
Click to expand...
Click to collapse
Okay go to the folder, Hold down shift and right click(mouse) and select open command prompt here.... Now type flash_all.bat n hit enter and tell me what u get!!
chiragkrishna said:
Okay go to the folder, Hold down shift and right click(mouse) and select open command prompt here.... Now type flash_all.bat n hit enter and tell me what u get!!
Click to expand...
Click to collapse
Here it is what I get:
C:\miui>fastboot getvar product 2>&1 | findstr /r /c:"^product: *MSM8996" || echo Missmatching image and device
rokasb said:
Here it is what I get:
C:\miui>fastboot getvar product 2>&1 | findstr /r /c:"^product: *MSM8996" || echo Missmatching image and device
Click to expand...
Click to collapse
which rom did you download?
correct one is Xiaomi Mi 5 Latest Global Stable Version Fastboot File Download
chiragkrishna said:
which rom did you download?
correct one is Xiaomi Mi 5 Latest Global Stable Version Fastboot File Download
Click to expand...
Click to collapse
Yes, I downlaoded exacly this
rokasb said:
Yes, I downlaoded exacly this
Click to expand...
Click to collapse
okay right click on flash_all.bat and open in word editor
remove this line
Code:
fastboot getvar product 2>&1 | findstr /r /c:"^product: *MSM8996" || echo Missmatching image and device
save it and run
chiragkrishna said:
okay right click on flash_all.bat and open in word editor
remove this line
Code:
fastboot getvar product 2>&1 | findstr /r /c:"^product: *MSM8996" || echo Missmatching image and device
save it and run
Click to expand...
Click to collapse
So I copied ADB files to my c:/miui folder where is ROM files to acces adb.
And it cannot be flashed because device is locked, here is the text I get:
Code:
C:\MIUI8>flash_all.bat
C:\MIUI8>fastboot getvar product 2>&1 | findstr /r /c:"^product: *MSM8996" || echo Missmatching image and device
product: MSM8996
C:\MIUI8>fastboot getvar product 2>&1 | findstr /r /c:"^product: *MSM8996" || exit /B 1
product: MSM8996
C:\MIUI8>fastboot erase bk12 2>&1
erasing 'bk12'...
FAILED (remote: device is locked. Cannot erase)
finished. total time: 0.022s
C:\MIUI8>if not 1 == 0 exit /B 1
C:\MIUI8>
rokasb said:
So I copied ADB files to my c:/miui folder where is ROM files to acces adb.
And it cannot be flashed because device is locked, here is the text I get:
Code:
C:\MIUI8>flash_all.bat
C:\MIUI8>fastboot getvar product 2>&1 | findstr /r /c:"^product: *MSM8996" || echo Missmatching image and device
product: MSM8996
C:\MIUI8>fastboot getvar product 2>&1 | findstr /r /c:"^product: *MSM8996" || exit /B 1
product: MSM8996
C:\MIUI8>fastboot erase bk12 2>&1
erasing 'bk12'...
FAILED (remote: device is locked. Cannot erase)
finished. total time: 0.022s
C:\MIUI8>if not 1 == 0 exit /B 1
C:\MIUI8>
Click to expand...
Click to collapse
try using MIFlash tool, if that fails then you can either give it service center or unlock your device
chiragkrishna said:
try using MIFlash tool, if that fails then you can either give it service center or unlock your device
Click to expand...
Click to collapse
I already tried flash with MiFlash tool. In my country there is no service center. Maby there is another way without service center, something like teardown method for bricked devices... Anything would help
rokasb said:
I already tried flash with MiFlash tool. In my country there is no service center. Maby there is another way without service center, something like teardown method for bricked devices... Anything would help
Click to expand...
Click to collapse
download MI PC suite install it and run it
enter recovery mode (hold VolUp+Power) and connect to PC
hopefully MI PC suite should update your phone!!
chiragkrishna said:
download MI PC suite install it and run it
enter recovery mode (hold VolUp+Power) and connect to PC
hopefully MI PC suite should update your phone!!
Click to expand...
Click to collapse
Yes, only china newest Mi Pc Suite does something. It allows me to choose global stable rom to write, but after that my problem repeats...
rokasb said:
Yes, only china newest Mi Pc Suite does something. It allows me to choose global stable rom to write, but after that my problem repeats...
Click to expand...
Click to collapse
unlock your device
chiragkrishna said:
unlock your device
Click to expand...
Click to collapse
Problem is that it writes me, that device is locked to another device... anad I can't unlock it
rokasb said:
Problem is that it writes me, that device is locked to another device... anad I can't unlock it
Click to expand...
Click to collapse
did you try manual way
Code:
fastboot flash boot boot.img
try it
if possible send me the flash_all.bat
Related
Hello, recently I bought K20 Pro. Unlocked the bootloader and flashed the last xiaomieu rom with android 10, but there are many bugs.
Can i go back to stock china stable with android 9 without issues, or ill have problems with arb? Thanks.
Tedoff said:
Hello, recently I bought K20 Pro. Unlocked the bootloader and flashed the last xiaomieu rom with android 10, but there are many bugs.
Can i go back to stock china stable with android 9 without issues, or ill have problems with arb? Thanks.
Click to expand...
Click to collapse
There’s no ARB on K20 Pro
Sukhi said:
There’s no ARB on K20 Pro
Click to expand...
Click to collapse
So i can flash the stock image with older firmware via twrp with no problems ?
Tedoff said:
So i can flash the stock image with older firmware via twrp with no problems ?
Click to expand...
Click to collapse
Fastboot is highly recommend. Choose the options carefully in Mi Flash. Do not lock your bootloader.
Sukhi said:
Fastboot is highly recommend. Choose the options carefully in Mi Flash. Do not lock your bootloader.
Click to expand...
Click to collapse
Can you give me link for MiFlash? Also my device is encrypted. Is this will be a problem ? Thanks for your time.
Tedoff said:
Can you give me link for MiFlash? Also my device is encrypted. Is this will be a problem ? Thanks for your time.
Click to expand...
Click to collapse
https://download.appmifile.com/images/2019/07/01/09cdc3a7-5a11-42aa-81f4-be27fe12ce80.msi
Choose Clean_All Only. Choosing Clean_All_Lock with lock your bootloader.
The tool is gonna wipe your internal storage so encryption doesn’t matter. Just logout from Xiaomi, Google accounts before proceeding. Also remove any Pin/Fingerprint if you have set.
Sukhi said:
There’s no ARB on K20 Pro
Click to expand...
Click to collapse
are you sure? i checked "antivar anti" on fastboot and it gave me "1" as result.
I took a look on flash_all.bat of 10.3.16 chinese rom i have here and file starts with:
set CURRENT_ANTI_VER=1
for /f "tokens=2 delims=: " %%i in ('fastboot %* getvar anti 2^>^&1 ^| findstr /r /c:"anti:"') do (set version=%%i)
if [%version%] EQU [] set version=0
set anticheck="antirollback check pass"
if %version% GTR %CURRENT_ANTI_VER% set anticheck="Current device antirollback version is greater than this pakcage"
echo %anticheck% | findstr /r /c:"pass" || @ECHO "Antirollback check error" && exit /B 1
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *raphael" || echo Missmatching image and device
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *raphael" || exit /B 1
thiagodark said:
are you sure? i checked "antivar anti" on fastboot and it gave me "1" as result.
I took a look on flash_all.bat of 10.3.16 chinese rom i have here and file starts with:
set CURRENT_ANTI_VER=1
for /f "tokens=2 delims=: " %%i in ('fastboot %* getvar anti 2^>^&1 ^| findstr /r /c:"anti:"') do (set version=%%i)
if [%version%] EQU [] set version=0
set anticheck="antirollback check pass"
if %version% GTR %CURRENT_ANTI_VER% set anticheck="Current device antirollback version is greater than this pakcage"
echo %anticheck% | findstr /r /c:"pass" || @ECHO "Antirollback check error" && exit /B 1
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *raphael" || echo Missmatching image and device
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *raphael" || exit /B 1
Click to expand...
Click to collapse
I have done rollback from Q to P successfully through fastboot multiple times. I am just quoting what i see on Xiaomi.eu.
Sukhi said:
I have done rollback from Q to P successfully through fastboot multiple times. I am just quoting what i see on Xiaomi.eu.
Click to expand...
Click to collapse
i believe arb is enabled on k20 pro devices, but xiaomi isn't apply policies yet, but as soon as we get a rom with index '2', we will get another bricked phones wave...
i think best practice is to check arb index in the rom you intend to flash...
How can we know if arb will be enabled?
Sukhi said:
https://download.appmifile.com/images/2019/07/01/09cdc3a7-5a11-42aa-81f4-be27fe12ce80.msi
Choose Clean_All Only. Choosing Clean_All_Lock with lock your bootloader.
The tool is gonna wipe your internal storage so encryption doesn’t matter. Just logout from Xiaomi, Google accounts before proceeding. Also remove any Pin/Fingerprint if you have set.
Click to expand...
Click to collapse
I did that, but now i have another problem.
In dev options it shows that my bootloader is locked. With fastboot check its unlocked. Is that normal?
Tedoff said:
I did that, but now i have another problem.
In dev options it shows that my bootloader is locked. With fastboot check its unlocked. Is that normal?
Click to expand...
Click to collapse
Did you do a clean flash? This is new to me. Try flashing a twrp and see if it boots in that.
Sent from my Redmi K20 Pro using Tapatalk
Sukhi said:
Did you do a clean flash? This is new to me. Try flashing a twrp and see if it boots in that.
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
I did clean flash, twrp and root. It boots into twrp without problem, but that bootloader status bothers me.
Tedoff said:
I did clean flash, twrp and root. It boots into twrp without problem, but that bootloader status bothers me.
Click to expand...
Click to collapse
Did you unlock it on your own or you got it unlocked from the seller? Try adding your MI Account under Developer Options >> Mi Unlock Status
Sent from my Redmi K20 Pro using Tapatalk
View attachment 4821051View attachment 4821053
Sukhi said:
Did you unlock it on your own or you got it unlocked from the seller? Try adding your MI Account under Developer Options >> Mi Unlock Status
Sent from my Redmi K20 Pro using Tapatalk
View attachment 4821051View attachment 4821053
Click to expand...
Click to collapse
I unlocked it by myself.
Tedoff said:
I unlocked it by myself.
Click to expand...
Click to collapse
Have you solved yout problem? Mine won't boot after unlocking my device.
FIXED I Just Extracted again the Fastboot firmware lmao
I installed Adaway app then it prompt to reboot then boom bootloop at fastboot then i tried to Mi Flash but error comes like
Errors:
error 1:
"2f19b358]:$for /F "tokens=2 delims=: " %i in ('fastboot -s 2f19b358 getvar anti 2>&1 | findstr /r /c:"anti:"') do (set version=%i ) "
error 2:
Flash vendor error
error 3:
flash crclist error
i already change usb slots
it works on the first time i bootloop using the same fastboot firmware.
i dont know what to do please help :crying:
you are using wrong firmware. flash latest compatible firmware of your device.
Well I unlocked my bootloader of my mi 11 ultra Chinese version to try other ROMs other than the stock Chinese ROM. I tried to flash the EEA ROM via fast boot but got two errors. The first one was too many links . The second one mentioned something like versions mismatch between the firmware and the phone. Does this mean that I can not install any stock ROM other than the Chinese version? If I can, then how? or how to fix this error(s)?
I'm currently on the xiaomi.eu latest weekly build . Its good overall but what I do not like is the battery life specially in idle times and most of the themes contain Chinese characters. Will installing either EEA or Global firmwares help in these issues?
Thanks in advance
lordvoldmort said:
Well I unlocked my bootloader of my mi 11 ultra Chinese version to try other ROMs other than the stock Chinese ROM. I tried to flash the EEA ROM via fast boot but got two errors. The first one was too many links . The second one mentioned something like versions mismatch between the firmware and the phone. Does this mean that I can not install any stock ROM other than the Chinese version? If I can, then how? or how to fix this error(s)?
I'm currently on the xiaomi.eu latest weekly build . Its good overall but what I do not like is the battery life specially in idle times and most of the themes contain Chinese characters. Will installing either EEA or Global firmwares help in these issues?
Thanks in advance
Click to expand...
Click to collapse
Did you use this tool?
If not download the rom here.
If yes try to change usb cable and use usb 2 port and check drivers.
Dont relock the bootloader.
And don't go backwards in versions without tweaking the fastboot script.
Sathelp said:
And don't go backwards in versions without tweaking the fastboot script.
Click to expand...
Click to collapse
Thats not true, you can go backwards.. you need to edit the flash_all.bat file and remove these Files:
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *star" /c:"^product: *mars" || echo Missmatching image and device
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *star" /c:"^product: *mars" || exit /B 1
::check anti_version
if exist %~dp0images\anti_version.txt (for /f "delims==" %%a in (%~dp0images\anti_version.txt) do (set CURRENT_ANTI_VER=%%a))
if [%CURRENT_ANTI_VER%] EQU [] set CURRENT_ANTI_VER=0
for /f "tokens=2 delims=: " %%i in ('fastboot %* getvar anti 2^>^&1 ^| findstr /r /c:"anti:"') do (set version=%%i)
if [%version%] EQU [] set version=0
set anticheck="antirollback check pass"
if %version% GTR %CURRENT_ANTI_VER% set anticheck="Current device antirollback version is greater than this pakcage"
echo %anticheck% | findstr /r /c:"pass" || @ECHO "Antirollback check error" && exit /B 1
fastboot %* getvar crc 2>&1 | findstr /r /c:"^crc: 1" && if %errorlevel% equ 0 (
fastboot %* flash crclist %~dp0images\crclist.txt || @ECHO "Flash crclist error" && exit /B 1
fastboot %* flash sparsecrclist %~dp0images\sparsecrclist.txt || @ECHO "Flash sparsecrclist error" && exit /B 1
)
you can type in cmd:
fastboot getvar anti.
That needs to be the same as anti_version.txt in Folder Images
you need to check the Anti File in Images.
And if you edit with getvar and setvar then you can downgrade for sure. or simple edit as shown above
012345678 said:
Thats not true, you can go backwards.. you need to edit the flash_all.bat file and remove these Files:
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *star" /c:"^product: *mars" || echo Missmatching image and device
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *star" /c:"^product: *mars" || exit /B 1
::check anti_version
if exist %~dp0images\anti_version.txt (for /f "delims==" %%a in (%~dp0images\anti_version.txt) do (set CURRENT_ANTI_VER=%%a))
if [%CURRENT_ANTI_VER%] EQU [] set CURRENT_ANTI_VER=0
for /f "tokens=2 delims=: " %%i in ('fastboot %* getvar anti 2^>^&1 ^| findstr /r /c:"anti:"') do (set version=%%i)
if [%version%] EQU [] set version=0
set anticheck="antirollback check pass"
if %version% GTR %CURRENT_ANTI_VER% set anticheck="Current device antirollback version is greater than this pakcage"
echo %anticheck% | findstr /r /c:"pass" || @ECHO "Antirollback check error" && exit /B 1
fastboot %* getvar crc 2>&1 | findstr /r /c:"^crc: 1" && if %errorlevel% equ 0 (
fastboot %* flash crclist %~dp0images\crclist.txt || @ECHO "Flash crclist error" && exit /B 1
fastboot %* flash sparsecrclist %~dp0images\sparsecrclist.txt || @ECHO "Flash sparsecrclist error" && exit /B 1
)
you can type in cmd:
fastboot getvar anti.
That needs to be the same as anti_version.txt in Folder Images
you need to check the Anti File in Images.
And if you edit with getvar and setvar then you can downgrade for sure. or simple edit as shown above
Click to expand...
Click to collapse
This is what he says"without tweaking the fastboot script"
If the version of Ar is equal or higher this is not necessary.
yeah youre right my fault...
What will happen if you do?
I flashed mine from Xiaomi eu 12.5.7.0 to EEA 12.5.3.0 without editing the script and phone rebooted just fine into new rom even giving me an error at the end (because didn't fix the miflashtool)
xNAPx said:
What will happen if you do?
I flashed mine from Xiaomi eu 12.5.7.0 to EEA 12.5.3.0 without editing the script and phone rebooted just fine into new rom even giving me an error at the end (because didn't fix the miflashtool)
Click to expand...
Click to collapse
If you do not relock the bootloader, there is an error at the end of the flash (without consequence).
lordvoldmort said:
Well I unlocked my bootloader of my mi 11 ultra Chinese version to try other ROMs other than the stock Chinese ROM. I tried to flash the EEA ROM via fast boot but got two errors. The first one was too many links . The second one mentioned something like versions mismatch between the firmware and the phone. Does this mean that I can not install any stock ROM other than the Chinese version? If I can, then how? or how to fix this error(s)?
I'm currently on the xiaomi.eu latest weekly build . Its good overall but what I do not like is the battery life specially in idle times and most of the themes contain Chinese characters. Will installing either EEA or Global firmwares help in these issues?
Thanks in advance
Click to expand...
Click to collapse
Both those errors are easily fixed. If you download Notepad++, you can edit the <Flash all.bat> script. In the script, lines four through eleven, I believe, there is an anti roll back portion of the script. Just delete that entry. The other error is happening in the MiFlash tool. Open the app and go to the upper left hand corner and open the configuration tab. The dropdown will say MIUI configuration. Click on that and scroll down to Checkpoint and delete the entry that is there. With those items deleted, you should be able to flash from CN to EEA or Global without any problem. Just remeber to select the correct radio button in the lower right hand corner. because if you relock your bootloader, you will be unable to flash a rom until you unlock it again.
How to get back on Stock ROM V12.0.3.0.RKFEUXM
1. First of all, you need to download the Firmware,Flash Tool & Minimal ADB & Fastboot (Everything u need is in the .rar File)
2. After the Download is finished, unpack the Zip Folder
3. Put the Firmware Folder directly in the C:\ Folder to avoid the "Anti Rollback Check Error"
4. Install Minimal ADB & Fastboot & the Drivers
5. Put your phone into fastboot mode and plug it into your PC
6. Open Mi Flash Tool (And Install the Drivers)
7. Click "select" then navigate to your C:\ Drive and select the Firmware Folder
8. Choose either you want to clean and lock the bootloader or just clean and keep the bootloader.
9. Click flash and wait until the flashing is done, after the flashing process a "Error" Message shows up but don't worry
10. Now you're on the Stock Rom Version "V12.0.3.0" but after the Setup, a V12.5.4.0 will pop up
Download- Mega (3,79GB)
Hello,
Im trying to use your guide but I keep getting the antirollback error. I''ve put all the folders innto C: and it keeps coming up. Is it something on my end im not doing correctly? Should all the files be in one specific folder re MIUI Rollback or does that not matter?
Thank you
p0werbag said:
Hello,
Im trying to use your guide but I keep getting the antirollback error. I''ve put all the folders innto C: and it keeps coming up. Is it something on my end im not doing correctly? Should all the files be in one specific folder re MIUI Rollback or does that not matter?
Thank you
Click to expand...
Click to collapse
Whats your problem? Maybe someone could help. Why dont you want to install the latest MIUI provided by Xiaomi? If you want to use the latest MIUI rom you could use https://www.xiaomitool.com/V2/ this tool.
Always helped me without problems. Or do you need a specific solution?
p0werbag said:
Hello,
Im trying to use your guide but I keep getting the antirollback error. I''ve put all the folders innto C: and it keeps coming up. Is it something on my end im not doing correctly? Should all the files be in one specific folder re MIUI Rollback or does that not matter?
Thank you
Click to expand...
Click to collapse
I know I'm a little late for the party, but here's for future refference;
you can right-click the flash_all.bat file and remove the following lines:
Code:
if exist %~dp0images\anti_version.txt (for /f "delims==" %%a in (%~dp0images\anti_version.txt) do (set CURRENT_ANTI_VER=%%a))
if [%CURRENT_ANTI_VER%] EQU [] set CURRENT_ANTI_VER=0
for /f "tokens=2 delims=: " %%i in ('fastboot %* getvar anti 2^>^&1 ^| findstr /r /c:"anti:"') do (set version=%%i)
if [%version%] EQU [] set version=0
set anticheck="antirollback check pass"
if %version% GTR %CURRENT_ANTI_VER% set anticheck="Current device antirollback version is greater than this pakcage"
echo %anticheck% | findstr /r /c:"pass" || @echo "Antirollback check error" && exit /B 1
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *agate" /c:"^product: *amber"|| @echo "Missmatching image and device" && exit /B 1
@echo "Now Check Finished ......"
save file and flash!
I downloaded the fastboot ROM here https://xiaomirom.com/en/download/redmi-note-10-pro-sweet-stable-V13.0.13.0.SKFEUXM/
and the Miflash here https://xiaomirom.com/en/download-xiaomi-flash-tool-miflash/
Then edited the "flash_all_lock" bat file like above. I put the ROM folder in "C" drive to avoid getting the "can't find folder" error I was getting.
stonebear said:
I downloaded the fastboot ROM here https://xiaomirom.com/en/download/redmi-note-10-pro-sweet-stable-V13.0.13.0.SKFEUXM/
and the Miflash here https://xiaomirom.com/en/download-xiaomi-flash-tool-miflash/
Then edited the "flash_all_lock" bat file like above. I put the ROM folder in "C" drive to avoid getting the "can't find folder" error I was getting.
Click to expand...
Click to collapse
and did it work? also, the flash_all_lock also locks the device again
RadixMalum said:
and did it work? also, the flash_all_lock also locks the device again
Click to expand...
Click to collapse
Yes, it worked. I wanted the bootloader locked again.
stonebear said:
Yes, it worked. I wanted the bootloader locked again.
Click to expand...
Click to collapse
ah, perfect!
Hello,
i just get a Redmi Note 10s a few days ago. I unlocked it using this tutorial and it worked perfectly.
Then i wanted to root it (because those ads are so annoying). So i used this guide but i had some issues during step 3. After "fastboot.exe reboot" the MIUI setup did not appeard. Then i tried a few things, looking for informations on this web site. But i guess i made a total mess on my phone because now he just turn on and turn off without stopping. It does not even start. I think i destroyed the boot partition using the wrong commands like a n00b ... I'm just abble to get the fastboot mode but not the recovery mode. I can still using fastboot on my computer but adb does not recognize it.
Any idea how i can do a hard/factory reset ?
Thanks a lot !
Ok ...
I tried this : https://xiaomiflashtool.com/tutorial/use-xiaomi-flash-tool
But after 10 minutes of flashing i get a time out error :
[2022-06-03 19:34:57:101:101999 UOMJZXHEHIZHBIBQ]:MiFlash 2022.2.18.0
[2022-06-03 19:34:57:101:101999 UOMJZXHEHIZHBIBQ]:vboytest index:0
[2022-06-03 19:34:57:109:109999 UOMJZXHEHIZHBIBQ]:Thread id:10 Thread name:
[2022-06-03 19:34:57:109:109999 UOMJZXHEHIZHBIBQ]:image path:C:\Users\Operateur\Downloads\rosemary_eea_global_images_V12.5.16.0.RKLEUXM_20220208.0000.00_11.0_eea
[2022-06-03 19:34:57:109:109999 UOMJZXHEHIZHBIBQ]:env android path:"C:\Users\Operateur\Downloads\MiFlash20220218\Source\ThirdParty\Google\Android"
[2022-06-03 19:34:57:109:109999 UOMJZXHEHIZHBIBQ]:script :C:\Users\Operateur\Downloads\rosemary_eea_global_images_V12.5.16.0.RKLEUXM_20220208.0000.00_11.0_eea\flash_all_except_data_storage.bat
[2022-06-03 19:34:57:122:122000 UOMJZXHEHIZHBIBQ]:Physical Memory Usage:3334144 Byte
[2022-06-03 19:34:57:125:125999 UOMJZXHEHIZHBIBQ]:start process id 6044 name cmd
[2022-06-03 19:34:57:555:555330 UOMJZXHEHIZHBIBQ]:info1:$fastboot -s UOMJZXHEHIZHBIBQ getvar product 2>&1 | findstr /r /c:"^product: *secret" || fastboot -s UOMJZXHEHIZHBIBQ getvar product 2>&1 | findstr /r /c:"^product: *rosemary" || fastboot -s UOMJZXHEHIZHBIBQ getvar product 2>&1 | findstr /r /c:"^product: *maltose" || echo Missmatching image and device
[2022-06-03 19:46:37:124:124248 UOMJZXHEHIZHBIBQ]:error: flash timeout6044
[2022-06-03 19:46:37:124:124248 UOMJZXHEHIZHBIBQ]:timeout kill cmd: 6044
It seems totally stucked :'/
Update :
This method https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool did not work either.
The program was not able to connect to the phone.
What's wrong with just reflashing using a relevant stock Xiaomi rom from the official site using their official software?
https://c.mi.com//miuidownload/detail?device=1900397
stuntdouble said:
What's wrong with just reflashing using a relevant stock Xiaomi rom from the official site using their official software?
https://c.mi.com//miuidownload/detail?device=1900397
Click to expand...
Click to collapse
Hi,
thanks, I'll try this as soon as possible and i'll come forward.
EDIT : that's pretty such the same thing i did mention on my second message : https://xiaomiflashtool.com/tutorial/use-xiaomi-flash-tool
So, i did what you told me.
That was almost exactly what i did yesterday, except for two points :
1 - The Xiaomi Flash Tool was older
2 - The ROM was more recent.
It exactly happened the same than yesterday, which is :
After 2 minutes it's 100% complete but it continues, and after 15 minutes my phone reboot.
But i realized something. When the phone is usb-plugged, every 5 or 10 seconds i can hear the windows sound that you hear when you plug or unplug the phone. I hear this sound only when it is on fastboot mode, not when when it is booting again and again.
I checked the Device Manager and every time i hear the sound, it does a refresh.
So i tried to do the same on another computer with another cable and i got exactly the same problem.
Here are the logs :
Code:
[15:57:27 UOMJZXHEHIZHBIBQ]:MiFlash 2020.3.14.0
[15:57:27 UOMJZXHEHIZHBIBQ]:vboytest index:0
[15:57:27 UOMJZXHEHIZHBIBQ]:idproduct: 0 idvendor: 0
[15:57:27 UOMJZXHEHIZHBIBQ]:Thread id:10 Thread name:UOMJZXHEHIZHBIBQ
[15:57:27 UOMJZXHEHIZHBIBQ]:image path:C:\Users\Operateur\Downloads\rosemary_eea_global_images_V12.5.17.0.RKLEUXM
[15:57:27 UOMJZXHEHIZHBIBQ]:env android path:"C:\Users\Operateur\Downloads\MiFlash2020-3-14-0\Source\ThirdParty\Google\Android"
[15:57:27 UOMJZXHEHIZHBIBQ]:script :C:\Users\Operateur\Downloads\rosemary_eea_global_images_V12.5.17.0.RKLEUXM\flash_all_lock.bat
[15:57:27 UOMJZXHEHIZHBIBQ]:Physical Memory Usage:3469312 Byte
[15:57:27 UOMJZXHEHIZHBIBQ]:start process id 14596 name cmd
[15:57:27 UOMJZXHEHIZHBIBQ]:info1:$fastboot -s devicename getvar product 2>&1 | findstr /r /c:"^product: *secret" || fastboot -s devicename getvar product 2>&1 | findstr /r /c:"^product: *rosemary" || fastboot -s devicename getvar product 2>&1 | findstr /r /c:"^product: *maltose" || echo Missmatching image and device
At the end of the tutorial you gave me i read this : If the flashing guide could not help you, please download Mi PC Suite here
But i have the same problem with this app : it tries to connect to the phone (Checking for updates) but the phone is 'unpluging' and 'pluging back' again and again and the app show me this : Reading device information failed.
If i click on 'Connect to device' i just get this window saying : Connect your device via USB.
I really do not know what to do :/
extract firmware and download platform tools ,place both files in 1 same folder and now hit flash all to flash firmware
i will write complete guide later
Hey,
thanks for the answer, i'm at work right now so i will not be able to do anything for a few hours.
And i did not understand everything from your message
zuhaibsarwar said:
extract firmware and download platform tools ,place both files in 1 same folder and now hit flash all to flash firmware
i will write complete guide later
Click to expand...
Click to collapse
Hey,
thanks for the answer, i'm at work right now so i will not be able to do anything for a few hours.
And i did not understand everything from your message
So i'll wait a bit for your complete guide ...
After 2 minutes it's 100% complete but it continues, and after 15 minutes my phone reboot.
Click to expand...
Click to collapse
That part is normal for flashing a stock rom, it takes a while. No idea why it likes to say 100% when it's nowhere near complete as yes it's confusing but that's just the way it is.
When the phone is usb-plugged, every 5 or 10 seconds i can hear the windows sound that you hear when you plug or unplug the phone.
Click to expand...
Click to collapse
It sounds like you might not have all the necessary ADB tools correctly configured for fastboot to work properly. It could also be the windows power saving feature on your usb hub causing that issue, or an incorrect or missing driver.
stuntdouble said:
That part is normal for flashing a stock rom, it takes a while. No idea why it likes to say 100% when it's nowhere near complete as yes it's confusing but that's just the way it is.
It sounds like you might not have all the necessary ADB tools correctly configured for fastboot to work properly. It could also be the windows power saving feature on your usb hub causing that issue, or an incorrect or missing driver.
Click to expand...
Click to collapse
Hey,
I check all the drivers and the ADB tools, they are all installed correctly. I change the USB power savings : USB selective suspend settings ==> Disabled.
And ... That was it ! I was able to flash it.
Thanks a lot !
nwaab said:
Hey,
thanks for the answer, i'm at work right now so i will not be able to do anything for a few hours.
And i did not understand everything from your message
So i'll wait a bit for your complete guide ..
Click to expand...
Click to collapse
download original firmware for your device and now extract the firmware for your device in 1 folder and now download platform tools
and also extract it and now move both folder files and in 1 folder and make sure you have adb and fastboot installed now from firmware folder click on flash script to installed firmware in your device and also before clicking in flash script put device on bootloader mode
nwaab said:
Hello,
i just get a Redmi Note 10s a few days ago. I unlocked it using this tutorial and it worked perfectly.
Then i wanted to root it (because those ads are so annoying). So i used this guide but i had some issues during step 3. After "fastboot.exe reboot" the MIUI setup did not appeard. Then i tried a few things, looking for informations on this web site. But i guess i made a total mess on my phone because now he just turn on and turn off without stopping. It does not even start. I think i destroyed the boot partition using the wrong commands like a n00b ... I'm just abble to get the fastboot mode but not the recovery mode. I can still using fastboot on my computer but adb does not recognize it.
Any idea how i can do a hard/factory reset ?
Thanks a lot !
Click to expand...
Click to collapse
stop messing with device by unlocking bootloader .dont get your device hard brick