Hey y'all - I saw this and am wondering if this is still applicable?
I'm on v7 with phh's SuperUser r259; so if, say, the November security patch drops, I can accept, download, and install directly from the notification panel? Or am I reading this wrong?
TIA!
alamo76 said:
Hey y'all - I saw this and am wondering if this is still applicable?
I'm on v7 with phh's SuperUser r259; so if, say, the November security patch drops, I can accept, download, and install directly from the notification panel? Or am I reading this wrong?
TIA!
Click to expand...
Click to collapse
You should be able to, but you will have to reflash the magisk zip so that the boot image is re-patched. I accepted an OTA on my Nexus 6P without any issues although I did use Flashfire.
ryaniskira said:
You should be able to, but you will have to reflash the magisk zip so that the boot image is re-patched. I accepted an OTA on my Nexus 6P without any issues although I did use Flashfire.
Click to expand...
Click to collapse
I want to try to start from stock and be able to get OTA updates.
First post in phh's SuperUser states that phh's SuperUser r259 "Magisk compatible, no boot image modifications are required"
So then I am guessing we don't need to reflash Magisk again since boot image is untouched.
Also what about the recovery? Will OTA update replace the twrp and therefore, TWRP needs to be reflshed after each OTA update.
Maybe someone who experienced this can write what needs to be done in order to successfully flash OTA update.
Thanks.
Orochi77 said:
I want to try to start from stock and be able to get OTA updates.
First post in phh's SuperUser states that phh's SuperUser r259 "Magisk compatible, no boot image modifications are required"
So then I am guessing we don't need to reflash Magisk again since boot image is untouched.
Also what about the recovery? Will OTA update replace the twrp and therefore, TWRP needs to be reflshed after each OTA update.
Maybe someone who experienced this can write what needs to be done in order to successfully flash OTA update.
Thanks.
Click to expand...
Click to collapse
Yes because Magisk itself modifies the boot image. So that's why the Magisk version of PHH Superuser doesn't modify the boot image.
Also, you can use FlashFire to install OTAs and preserve the custom recovery, also you can set it to reflash Magisk after the OTA. (With PHH Superuser, SELinux needs to be in permissive mode to use FlashFire)
ryaniskira said:
Yes because Magisk itself modifies the boot image. So that's why the Magisk version of PHH Superuser doesn't modify the boot image.
Also, you can use FlashFire to install OTAs and preserve the custom recovery, also you can set it to reflash Magisk after the OTA. (With PHH Superuser, SELinux needs to be in permissive mode to use FlashFire)
Click to expand...
Click to collapse
But FlashFire says it needs SuperSU or cm's SU
KaMonsieur said:
But FlashFire says it needs SuperSU or cm's SU
Click to expand...
Click to collapse
PHH's Superuser technically is CM's SU, it's a fork of Koishik's Superuser that was used in CM up until MM.
ryaniskira
With PHH Superuser, SELinux needs to be in permissive mode to use FlashFire
Click to expand...
Click to collapse
I am on stock samsung kernel which is set to SELinux enforcing.
What are my options in terms of getting OTA and what needs to be done?
Do I accept OTA, then flash recovery and flash Magisk + PHH Supersuser?
Can I use Flashfire with supersu instead of PHH superuser, will it work with SELinux enforcing?
Thanks for your time.
ryaniskira said:
PHH's Superuser technically is CM's SU, it's a fork of Koishik's Superuser that was used in CM up until MM.
Click to expand...
Click to collapse
I once used SuperSU and FlashFire. But I did not set SElinux to permissive myself. Does SuperSU automatically do it?
KaMonsieur said:
I once used SuperSU and FlashFire. But I did not set SElinux to permissive myself. Does SuperSU automatically do it?
Click to expand...
Click to collapse
SELinux does not need to be set to permissive when you use SuperSU because SuperSU modifies SEPolicy to allow his apps to work with SELinux set to enforcing.
ryaniskira
So to get OTA update in a reliable way. One has to do the following steps.
1. TWRP
2. SuperSu
3. Magisk 7
4. Flashify
Let me know if this is correct?
ryaniskira said:
SELinux does not need to be set to permissive when you use SuperSU because SuperSU modifies SEPolicy to allow his apps to work with SELinux set to enforcing.
Click to expand...
Click to collapse
Thanks for your help!
Answering to my previous post.
In my case flashfire was useless as it could not detect ota zip update at all on my S5, even when I pointed flashfire to the exact location.
It is possible that the OTA zip is encrypted. I could not even open it as archive.
Even if system is untouched, updater detects custom boot image (patched by supersu) and custom recovery. I was able to fool the system by turning the device status to official. Then flashing original recovery and flashing the OTA. Of course after this, you would have to flash custom recover, root and magisk. Unless the process with stock recovery and stock boot is automated, it seems like too much work.
For now, the easiest solution is just to flash an updated firmware when it comes out. This way it will update everything while preserving your data partition.
This begs me to ask this question. Why even bother with systemless this or systemless that. At the end after flashing an updated firmware, the system partition will be overwritten whether it was systemless or not.
Orochi77 said:
Answering to my previous post.
In my case flashfire was useless as it could not detect ota zip update at all on my S5, even when I pointed flashfire to the exact location.
It is possible that the OTA zip is encrypted. I could not even open it as archive.
Even if system is untouched, updater detects custom boot image (patched by supersu) and custom recovery. I was able to fool the system by turning the device status to official. Then flashing original recovery and flashing the OTA. Of course after this, you would have to flash custom recover, root and magisk. Unless the process with stock recovery and stock boot is automated, it seems like too much work.
For now, the easiest solution is just to flash an updated firmware when it comes out. This way it will update everything while preserving your data partition.
This begs me to ask this question. Why even bother with systemless this or systemless that. At the end after flashing an updated firmware, the system partition will be overwritten whether it was systemless or not.
Click to expand...
Click to collapse
For me, the greatest benefit with Magisk is that after an update (by flashing relevant parts of the factory image) all that is needed for my different system modifications is to flash Magisk. It has cut the time it takes for me to update by a huge factor.
Didgeridoohan said:
For me, the greatest benefit with Magisk is that after an update (by flashing relevant parts of the factory image) all that is needed for my different system modifications is to flash Magisk. It has cut the time it takes for me to update by a huge factor.
Click to expand...
Click to collapse
What tool are you using to flash your firmware?
Orochi77 said:
What tool are you using to flash your firmware?
Click to expand...
Click to collapse
Big update, fastboot from my PC. Small update (monthly security update), flash boot and system image in TWRP.
Didgeridoohan said:
Big update, fastboot from my PC. Small update (monthly security update), flash boot and system image in TWRP.
Click to expand...
Click to collapse
Ok thanks. I have to use odin as I have Samsung phone.
When you flash system and boot, don't you lose root?
Orochi77 said:
Ok thanks. I have to use odin as I have Samsung phone.
When you flash system and boot, don't you lose root?
Click to expand...
Click to collapse
Flashing boot image means I need to reflash Magisk (and my custom kernel), but that's it. I use Magisk compatible phh's superuser, which means that's all I need to do. That's why I use (and love) Magisk.
I'm sorta n00b these days been years since ive been much into modding, but got a couple simple questions, i think i know the answer from what i've seen and read, but just want to verify. Save myself a bit of time if i screw it up.
My Device:
LG Nexus 5x Stock ROM 7.1.1 (Recently Flashed clean image that included Feb 2017 security patch) w/ElementalX Kernel
Magisk v11.x (whatever the most recent is, it's up to date) w/phh superuser
I want to flash the new March 2017 Security patch, ideally without losing any data or having to restore all my apps and data from backup ect.. This is what it seems i should do, i think i can use Flashfire (yes it detects my OTA packages and asks to prepare to flash):
I do backups regularly via otg to an external drive. Just completed one before this post
1. Flash OTA, allow flashfire to handle
2. (RE)flash magisk zip
3. (RE)flash phh superuser
4. (RE)flash elementalX kernel
This should leave everything as it was when i started relatively unmodified besides having the new security patch added yes?
g0d0fmischief said:
I'm sorta n00b these days been years since ive been much into modding, but got a couple simple questions, i think i know the answer from what i've seen and read, but just want to verify. Save myself a bit of time if i screw it up.
My Device:
LG Nexus 5x Stock ROM 7.1.1 (Recently Flashed clean image that included Feb 2017 security patch) w/ElementalX Kernel
Magisk v11.x (whatever the most recent is, it's up to date) w/phh superuser
I want to flash the new March 2017 Security patch, ideally without losing any data or having to restore all my apps and data from backup ect.. This is what it seems i should do, i think i can use Flashfire (yes it detects my OTA packages and asks to prepare to flash):
I do backups regularly via otg to an external drive. Just completed one before this post
1. Flash OTA, allow flashfire to handle
2. (RE)flash magisk zip
3. (RE)flash phh superuser
4. (RE)flash elementalX kernel
This should leave everything as it was when i started relatively unmodified besides having the new security patch added yes?
Click to expand...
Click to collapse
PHH Superuser is not compatible with v11
1. It is either Systemless SuperSU (installed before Magisk, or the included MagiskSU (if systemless SU is not installed before Magisk).
jhedfors said:
PHH Superuser is not compatible with v11
1. It is either Systemless SuperSU (installed before Magisk, or the included MagiskSU (if systemless SU is not installed before Magisk).
Click to expand...
Click to collapse
I did it with a previous version, and upgrade to version 11. As long as i follow those steps to get back to 11 it shouldn't matter does it? Meaning flash the other version of magisk i did to start with along with the corresponding phh su, then allow it to update to v11. This is how i got to v11. I planned on using the very same files to flash and root that i did before and allowing it to update. I read the magisk thread about the updates and changes to it. If this isn't a good idea, or just flat out won't work on that basis of trying to flash the older version and allowing the upgrade as i did initially, should i just flash magisk v11? Didn't want to stray from what worked in this regard. But yea ive read this from the magisk thread
If you're already rooted with MagiskSU, Magisk phh's superuser (not original), or Official Systemless SuperSU
Install/upgrade Magisk Manager from Play Store
Install/upgrade Magisk as prompted in the application
Reboot and you're done!!
I will have lost root by flashing the OTA, right? So say i flash just magisk v11 afterwards, what would i need to flash for root and the app to use once started?
This is the method for rooting and magisk install that i used.. Just allowed it to update to 11 after it starts. Do you mean to say this won't work again?
http://www.theandroidsoul.com/systemless-root-magisk-android/
Related
Could I have dm-verify disabled, Magisk root with AP working, bootloader unlocked, and twrp all on OOS 4.0.3? What would be the best process for doing this on a brand new 3t with stock OOS 3.5.4?
What I was thinking was first disabling dm-verify on 3.5.4 with fastboot commands, then flash 4.0.3 as it is less than 1 GB, unlock the bootloader, and install magisk and twrp w/ fastboot. Am I missing anything?
Ulti2x said:
Could I have dm-verify disabled, Magisk root with AP working, bootloader unlocked, and twrp all on OOS 4.0.3? What would be the best process for doing this on a brand new 3t with stock OOS 3.5.4?
What I was thinking was first disabling dm-verify on 3.5.4 with fastboot commands, then flash 4.0.3 as it is less than 1 GB, unlock the bootloader, and install magisk and twrp w/ fastboot. Am I missing anything?
Click to expand...
Click to collapse
Just install FreedomOS, and judging by the performance and battery of 4.0.3 vs the new beta, get the CE version based on the beta. Im downloading it now. Some people are passing SafteyNet
Sent from my ONEPLUS A3000 using Tapatalk
uudruid74 said:
Just install FreedomOS, and judging by the performance and battery of 4.0.3 vs the new beta, get the CE version based on the beta. Im downloading it now. Some people are passing SafteyNet
Click to expand...
Click to collapse
What's CE?
Ulti2x said:
What's CE?
Click to expand...
Click to collapse
Not entirely sure what it stands for, but its based on the 7.1.1 beta. Running it now. Not passing safetynet, but it has a checker telling me why. Working on it..
Sent from my ONEPLUS A3000 using Tapatalk
To simplify this question, could I disable dm-verify and unlock the bootloader on OOS 3.5.4 and boot back into a wiped phone without any problems? After unlocking the bootloader and disabling dm verify, will I able to just update to 4.0.3 using the OTAs in settings?
Or does booting into the phone with an unlocked bootloader and no dm verify cause me to get stuck at boot? Thanks in advance.
Unlocking the bootloader does not trigger dm-verity or prevent you from installing via automatic OTA installs. Dm-verity is triggered if you flash TWRP and swipe to allow system modifications, which you will have to do if you intend to to root later.
You can use Oxygen OS's built-in OTA installer to update your phone as long as you have not rooted and have not installed TWRP yet. If you have either rooted or installed TWRP, it would be safer to flash the full ROM through TWRP for upgrades.
That said, everything you listed above can be accomplished. I would advise you take the following steps:
1) Use the phone's built-in OTA updater to upgrade to OOS 4.0.3*
*You can upgrade at a later step, though this way is more convenient as OOS will download and flash the patch automatically
2) Unlock bootloader (this will wipe everything)
3) Either move the Magisk.zip file to your internal storage at this point, or place it on a flash drive which you can access on your phone through USB OTG
4) Flash TWRP 3.0.4-1 through fastboot
5) Reboot to TWRP, swipe to enable system modifications (do not reboot until after you root)
6) Flash Magisk v11.1
7) Reboot into system, download Magisk Manager from the app store if the zip you flashed did not install the app automatically
8) Enable Magisk Hide in Magisk Manager, also hide Magisk from the play store app (prevents it from detecting root and labeling your device as uncertified).
9) Reboot phone for Magisk Hide to take effect.
Safetynet should be able to pass at this point. If you get a dm-verity message during boot, but everything else works perfectly, you can remove the message following this guide. I'm not sure if the stock kernel for OOS hides bootloader status, if you have problems with safetynet, you could try using a custom kernel.
At the moment, I am on OOS 4.0.3 with Franco's kernel and rooted with Magisk v11.1. My bootloader is unlocked and I have TWRP 3.0.4-1 as the recovery. Safetynet passes and my device is listed as certified in the Play Store. I can't test Android Pay as it hasn't been released here yet, though apps that checks safetynet like Pokemon GO work.
Anova's Origin said:
Unlocking the bootloader does not trigger dm-verity or prevent you from installing via automatic OTA installs. Dm-verity is triggered if you flash TWRP and swipe to allow system modifications, which you will have to do if you intend to to root later.
You can use Oxygen OS's built-in OTA installer to update your phone as long as you have not rooted and have not installed TWRP yet. If you have either rooted or installed TWRP, it would be safer to flash the full ROM through TWRP for upgrades.
That said, everything you listed above can be accomplished. I would advise you take the following steps:
1) Use the phone's built-in OTA updater to upgrade to OOS 4.0.3*
*You can upgrade at a later step, though this way is more convenient as OOS will download and flash the patch automatically
2) Unlock bootloader (this will wipe everything)
3) Either move the Magisk.zip file to your internal storage at this point, or place it on a flash drive which you can access on your phone through USB OTG
4) Flash TWRP 3.0.4-1 through fastboot
5) Reboot to TWRP, swipe to enable system modifications (do not reboot until after you root)
6) Flash Magisk v11.1
7) Reboot into system, download Magisk Manager from the app store if the zip you flashed did not install the app automatically
8) Enable Magisk Hide in Magisk Manager, also hide Magisk from the play store app (prevents it from detecting root and labeling your device as uncertified).
9) Reboot phone for Magisk Hide to take effect.
Safetynet should be able to pass at this point. If you get a dm-verity message during boot, but everything else works perfectly, you can remove the message following this guide. I'm not sure if the stock kernel for OOS hides bootloader status, if you have problems with safetynet, you could try using a custom kernel.
Click to expand...
Click to collapse
Thanks so much. I don't need to wipe cache after I flash Magisk right? And what's the big deal if the play store detects my device as uncertified?
Might as well wipe cache afterwards for good measure.
At the moment, Play Store certification does not seem to affect anything, though you never know when Google is going to start blocking uncertified devices from certain apps.
Just a small note but you should be able to root without modifying system. They modify boot image now and don't touch system.
Sent from my ONEPLUS A3000 using Tapatalk
Anova's Origin said:
Might as well wipe cache afterwards for good measure.
At the moment, Play Store certification does not seem to affect anything, though you never know when Google is going to start blocking uncertified devices from certain apps.
Click to expand...
Click to collapse
Can I use fastboot commands just by opening command prompt right?
EDIT: This link okay? https://forum.xda-developers.com/showthread.php?t=2588979
That tool should work fine.
Be sure to install the correct drivers for the OP3T as well.
Anova's Origin said:
That tool should work fine.
Be sure to install the correct drivers for the OP3T as well.
Click to expand...
Click to collapse
With this tool, I should be set for drivers right? https://forum.xda-developers.com/oneplus-3/development/toolkit-oneplus-3-toolkit-unlock-t3398799
Ulti2x said:
With this tool, I should be set for drivers right? https://forum.xda-developers.com/oneplus-3/development/toolkit-oneplus-3-toolkit-unlock-t3398799
Click to expand...
Click to collapse
Yep
uudruid74 said:
Not entirely sure what it stands for, but its based on the 7.1.1 beta. Running it now. Not passing safetynet, but it has a checker telling me why. Working on it..
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
Ulti2x said:
What's CE?
Click to expand...
Click to collapse
CE stands for community edition
Anova's Origin said:
Unlocking the bootloader does not trigger dm-verity or prevent you from installing via automatic OTA installs. Dm-verity is triggered if you flash TWRP and swipe to allow system modifications, which you will have to do if you intend to to root later.
You can use Oxygen OS's built-in OTA installer to update your phone as long as you have not rooted and have not installed TWRP yet. If you have either rooted or installed TWRP, it would be safer to flash the full ROM through TWRP for upgrades.
That said, everything you listed above can be accomplished. I would advise you take the following steps:
1) Use the phone's built-in OTA updater to upgrade to OOS 4.0.3*
*You can upgrade at a later step, though this way is more convenient as OOS will download and flash the patch automatically
2) Unlock bootloader (this will wipe everything)
3) Either move the Magisk.zip file to your internal storage at this point, or place it on a flash drive which you can access on your phone through USB OTG
4) Flash TWRP 3.0.4-1 through fastboot
5) Reboot to TWRP, swipe to enable system modifications (do not reboot until after you root)
6) Flash Magisk v11.1
7) Reboot into system, download Magisk Manager from the app store if the zip you flashed did not install the app automatically
8) Enable Magisk Hide in Magisk Manager, also hide Magisk from the play store app (prevents it from detecting root and labeling your device as uncertified).
9) Reboot phone for Magisk Hide to take effect.
Safetynet should be able to pass at this point. If you get a dm-verity message during boot, but everything else works perfectly, you can remove the message following this guide. I'm not sure if the stock kernel for OOS hides bootloader status, if you have problems with safetynet, you could try using a custom kernel.
At the moment, I am on OOS 4.0.3 with Franco's kernel and rooted with Magisk v11.1. My bootloader is unlocked and I have TWRP 3.0.4-1 as the recovery. Safetynet passes and my device is listed as certified in the Play Store. I can't test Android Pay as it hasn't been released here yet, though apps that checks safetynet like Pokemon GO work.
Click to expand...
Click to collapse
My Play Store says uncertified after I did the whole process, and hid Magisk from it. Anyway to fix it?
Ulti2x said:
My Play Store says uncertified after I did the whole process, and hid Magisk from it. Anyway to fix it?
Click to expand...
Click to collapse
Go into settings, find Play Store and wipe cache. Then reboot.
Anova's Origin said:
Go into settings, find Play Store and wipe cache. Then reboot.
Click to expand...
Click to collapse
Still says it. Maybe I need to wait?
Forgot, I actually had to delete Play Store's app data last time before rebooting. Then it worked.
Thanks a lot everybody! I have never used fast boot before (have only flash w/ sammy phones) and now I know. Thanks again all for helping me.
Hey everybody I rooted my device this morning, and I was setting everything up again since it gets wiped during the process. So finally I come and try to login in to Snapchat and it says something similar to "log in has failed please try again later" anybody have this problem or a way to fix it? Thanks in advance!
Snapchat checks for root and purposely prevents you from logging in if it find it. If you rooted with SuperSU, try installing Chainfire's SUHide. Otherwise, if you rooted with Magisk, enable MagiskHide in Magisk Manager.
I usually unroot with SU and login while unrooted, then flash whatever SU zip used to root again. It should work and you'll stay logged in.
martinsavvy said:
I usually unroot with SU and login while unrooted, then flash whatever SU zip used to root again. It should work and you'll stay logged in.
Click to expand...
Click to collapse
so i just do the full unroot option, sign in, then just flash the SU again?
sakumaxp said:
so i just do the full unroot option, sign in, then just flash the SU again?
Click to expand...
Click to collapse
Yeah that's what works for me.
martinsavvy said:
Yeah that's what works for me.
Click to expand...
Click to collapse
OMG thank you so much that was so easy!!!!
magisk is better though because you can still use android pay and mobile banking applications.
If I throw on a custom ROM after wiping will I need to do this process again?
Yes. Unless the custom ROM has built-in root, you will have to flash SuperSU or Magisk every time you flash a ROM (including updating the same ROM to a newer version). Flashing a ROM replaces the files required for root in the /system or /boot partition.
Anova's Origin said:
Yes. Unless the custom ROM has built-in root, you will have to flash SuperSU or Magisk every time you flash a ROM (including updating the same ROM to a newer version). Flashing a ROM replaces the files required for root in the /system or /boot partition.
Click to expand...
Click to collapse
I shouldnt brick if i have to loose root and reflash super SU when I'm running a rom right? Sorry for all the questions
Suddenly losing root without a reasonable explanation would be a cause for concern and should merit further investigation.
However, simply flashing SuperSU after flashing a ROM (dirty or clean flash) shouldn't cause any issues.
Anova's Origin said:
Suddenly losing root without a reasonable explanation would be a cause for concern and should merit further investigation.
However, simply flashing SuperSU after flashing a ROM (dirty or clean flash) shouldn't cause any issues.
Click to expand...
Click to collapse
Yeah cos I would need to flash the ROM, then sign in to Snapchat, then go back to TWRP and flash super SU
Honestly, I would just recommend you to use Magisk to root. You can have it hide both root and itself from apps like Snapchat. Better yet, since Magisk Manager is not a system app, it will survive updates through dirty flashes. This means that after the initial set up, any time you dirty flash a ROM and then Magisk immediately afterwards, root is already set up and hidden from Snapchat the first time you boot up.
Also, be careful with flashing a ROM without rooting immediately. ROMs like OOS will either replace TWRP with stock recovery or trigger dm-verity if you don't root immediately after clean flashing.
Anova's Origin said:
Honestly, I would just recommend you to use Magisk to root. You can have it hide both root and itself from apps like Snapchat. Better yet, since Magisk Manager is not a system app, it will survive updates through dirty flashes. This means that after the initial set up, any time you flash a ROM and then Magisk immediately afterwards, root is already set up and hidden from Snapchat the first time you boot up.
Also, be careful with flashing a ROM without rooting immediately. You might trigger dm-verity if you clean flash a ROM like OOS without rooting before booting.
Click to expand...
Click to collapse
So I just have to download magisk manager and it should re-do everything for me if I understand correctly right?
sakumaxp said:
So I just have to download magisk manager and it should re-do everything for me if I understand correctly right?
Click to expand...
Click to collapse
You will have to remove all traces of SuperSU before flashing Magisk. If Magisk detects systemless SuperSU already present on your phone, it won't root it with its own method (and therefore cannot hide root from other apps). The easiest way to install Magisk over SuperSU is just to dirty flash your current ROM and then immediately flash Magisk v11.1 (don't forget to wipe cache/dalvik). After you boot, you will have to install the Magisk Manager app from the playstore if the Magisk.zip didn't already do so automatically. Then enable Magisk Hide and reboot your phone. Root should be hidden now. You will have to regrant root permissions for all of your root apps.
Anova's Origin said:
You will have to remove all traces of SuperSU before flashing Magisk. If Magisk detects systemless SuperSU already present on your phone, it won't root it with its own method (and therefore cannot hide root from other apps). The easiest way to install Magisk over SuperSU is just to dirty flash your current ROM and then immediately flash Magisk v11.1 (don't forget to wipe cache/dalvik). After you boot, you will have to install the Magisk Manager app from the playstore if the Magisk.zip didn't already do so automatically. Then enable Magisk Hide and reboot your phone. Root should be hidden now. You will have to regrant root permissions for all of your root apps.
Click to expand...
Click to collapse
I'm on stock ROM, so I guess I can go into super su and loose root then download magisk and get it that way
Thanks mate, it took forever to find this solution, it worked!
I use SU and it was simple to "unroot" from within the SU# app
1. settings scroll down to the "cleanup" section, select full unroot, accept all the warning messages, the phone will reboot into recovery and then reboot the phone after it finishes. Your phone may cycle through the reboot process a couple of times
2. log back into your phone, then you can log into the Snapchat app.
3. now you can re-root your phone, if you want to.
Cheers.
Hello, I am currently rooted on stock oos 4.0.3, with latest TWRP and super su free v2.79, can anyone help me out and tell me how to switch to magisk please, thank you!
Can I just use super su full unroot option then flash magisk?
Either reflash the original boot.img or download the unsu script from https://forum.xda-developers.com/showpost.php?p=63615067, then flash magisk again.
palesaint said:
Either reflash the original boot.img or download the unsu script from https://forum.xda-developers.com/showpost.php?p=63615067, then flash magisk again.
Click to expand...
Click to collapse
so flash unsu, then flash magisk. simple?
Dr Grato said:
so flash unsu, then flash magisk. simple?
Click to expand...
Click to collapse
If you use the unSU script the process is:
unSU
stock boot image
Magisk
This method did not work for me.
I am on KETAN n10 and initially, viper did not work. I installed magisk but that didn't fix it. nor the meefik busy box. So i decided to uninstall magisk and go back to superSU and it magically worked...
I unrooted from SuperSU itself like shown on the app's forum I believe. It rebooted my phone, I went into recovery first and then just flashed the latest magisk and made the switch :laugh:
SourPower said:
I unrooted from SuperSU itself like shown on the app's forum I believe. It rebooted my phone, I went into recovery first and then just flashed the latest magisk and made the switch :laugh:
Click to expand...
Click to collapse
So you just went into the SuperSU app and used the built in Unroot option, and when the phone rebooted, you went back into recovery and flashed the latest Magisk and did NOT flash a boot.img and everything worked fine? you have root with Magisk now instead of SU and you didnt get a bootloop at all??? (i really want to swap out SU for magisk in my sons LG G2, so he can play PoGo again lol) (His G2 is running CRdroid custom rom, I wonder if that effects the steps I'll need to take)
Can anyone offer me some guidance or assistance please and thank you?
JG420 said:
So you just went into the SuperSU app and used the built in Unroot option, and when the phone rebooted, you went back into recovery and flashed the latest Magisk and did NOT flash a boot.img and everything worked fine? you have root with Magisk now instead of SU and you didnt get a bootloop at all??? (i really want to swap out SU for magisk in my sons LG G2, so he can play PoGo again lol) (His G2 is running CRdroid custom rom, I wonder if that effects the steps I'll need to take)
Can anyone offer me some guidance or assistance please and thank you?
Click to expand...
Click to collapse
If there's a proper backup of the boot image for the SuperSU app's full unroot option to restore, then that process should work perfectly (I've done it on a few devices myself). It's when it can't properly restore the boot image you might have issues and you'll have to do it yourself.
Take a look in the Magisk Troubleshooting guide, under "Moving from another systemless root solution to MagiskSU".
The nuclear method might be, to just flash the full stock OOS zip (can flash in TWRP) which will unroot and restore the boot.img (and everything else!). Then immediately flash Magisk before rebooting (so have the Magisk zip on the phone before updating). This should fully remove SuperSU, install Magisk, and keep TWRP on the phone.
Seeing as the original poster is still on OOS 4.0.3, you may want to update, anyway!
JG420 said:
So you just went into the SuperSU app and used the built in Unroot option, and when the phone rebooted, you went back into recovery and flashed the latest Magisk and did NOT flash a boot.img and everything worked fine? you have root with Magisk now instead of SU and you didnt get a bootloop at all??? (i really want to swap out SU for magisk in my sons LG G2, so he can play PoGo again lol) (His G2 is running CRdroid custom rom, I wonder if that effects the steps I'll need to take)
Can anyone offer me some guidance or assistance please and thank you?
Click to expand...
Click to collapse
I've done this on my 3t but I do have a G3 coincidentally lol, but yes I unrooted from su, it restarted my phone, before booting back into the system I went in twrp right away and then flashed magisk.
There are two options given in the SuperSU app, one is clean up to switch to a different SU app and the other is to permanently unroot. Which option is better?
hypothrax said:
There are two options given in the SuperSU app, one is clean up to switch to a different SU app and the other is to permanently unroot. Which option is better?
Click to expand...
Click to collapse
I chose the Full Unroot option. Then flashed magisk. Worked perfectly.
Use the full unroot option. Catch here is that you might get dm-verity warning. It won't affect the phone in anyway but Android Pay might not work and you will see the warning for 5 seconds, everytime you restart the phone.
Thanks so much for ths thread. I am on Resurrection Remix OS and inititally installed SuperSU over Magisk (which came with the ROM). I decided that I wanted to use Magisk instead and followed the instructions in this thread and it worked a treat.
Solved: See this post.
After the recent SuperSU 2.81 update sent my Z3C into a boot-loop I came across a few comments on this XDA article saying that MagiskSU is the way to go these days.
Now, I gather from this thread that the best way to root is to just install stock Marshmallow and run the provided installer then flash a root binary via TWRP.
However, the FAQ in the official Magisk post states:
Sony Devices: If you're using stock kernel, it is using Sony's special ELF format. Magisk will repack it to standard AOSP format, which requires your device to be unlocked.
Click to expand...
Click to collapse
So, if the bootloader needs to be unlocked to install Magisk, does that mean you can't have the phone's DRM features active? Or is it possible to restore the DRM stuff after Magisk has been installed (assuming you've backed up the DRM keys)?
Also, does the fact that Magisk repacks the kernel mean SafetyNet will always fail on a Sony device, regardless of Magisk Hide being enabled?
I'm on latest MM and no problems with new SuperSU. All latest updates installed and 2.81 and 2.82 are working well.
Chamelleon said:
I'm on latest MM and no problems with new SuperSU. All latest updates installed and 2.81 and 2.82 are working well.
Click to expand...
Click to collapse
I guess you must be lucky then since Chainfire has advised Xperia users to stay on 2.79, as per the news article I linked.
Still, regardless of whether SuperSU works for some people or not, I'd still like to find out if MagiskSU is a viable alternative for Sony devices and what the correct procedure is to install it and retain all the phone's features.
Did Your SuperSU app was converted to system app? Mine wasn't, maybe thats an answer.
Chamelleon said:
Did Your SuperSU app was converted to system app? Mine wasn't, maybe thats an answer.
Click to expand...
Click to collapse
Possibly; can't remember to be honest. Anyway, flashing back to 2.79 fixed the boot loop and I've disabled auto-update until Chainfire says otherwise.
I still want to learn about Magisk though; not keep discussing SuperSU
I found a few bits of info on the subject:
RootKernel can apparently repack the stock kernel with a DRM fix so that all the DRM features can be restored with an unlocked bootloader.
BootBridge can install Magisk without repacking the ELF kernel in AOSP format, which the author says is preferable. However, BootBridge itself requires an unlocked bootloader so the DRM is still an issue I guess... <-- This is only meant for specific older devices; not the Z3C.
Magisk Patch claims Magisk won't work without disabling Sony RIC and provides a fix if you haven't used RootKernel already.
Trying to piece it all together is a little confusing so if anyone has actually done it, I'd be interested to hear from you.
Do we even need the SuperSU updates? 2.79 works fine for me without any issues plus the new versions are maintained by the Chinese company (I'm using some different version compiled by Chainfire himself). The only problem is the update notification in Play Store tho....
nogaff said:
After the recent SuperSU 2.81 update sent my Z3C into a boot-loop I came across a few comments on this XDA article saying that MagiskSU is the way to go these days.
Now, I gather from this thread that the best way to root is to just install stock Marshmallow and run the provided installer then flash a root binary via TWRP.
However, the FAQ in the official Magisk post states:
So, if the bootloader needs to be unlocked to install Magisk, does that mean you can't have the phone's DRM features active? Or is it possible to restore the DRM stuff after Magisk has been installed (assuming you've backed up the DRM keys)?
Also, does the fact that Magisk repacks the kernel mean SafetyNet will always fail on a Sony device, regardless of Magisk Hide being enabled?
Click to expand...
Click to collapse
actually, i have my DRM partition and Magisk on my z3c UB. Here is what i did, first i did patch boot.img with magisk and then used ta-poc tool to restore my TA-backed up partition. oh! magisk hide works properly as well giving me full access to SafetyNet.
espaciosalter20 said:
first i did patch boot.img with magisk and then used ta-poc tool to restore my TA-backed up partition
Click to expand...
Click to collapse
I finally got a chance to try this out and I'm not having much success to be honest.
I'm starting off with an unlocked bootloader and flashing stock MM 23.5.A.1.291, then flashing TWRP.
In TWRP, the current version of Magisk (v14.0) refuses to install; it just complains about Sony ELF32 format and instructs me to use BootBridge, which is only supposed to be required for older devices like the Z2.
Anyway, I tried installing Magisk via BootBridge and it claims to have installed successfully, but then Magisk Manager says Magisk is not installed when I boot into Android (yes, I've rebooted a couple of times as well).
Next, I started over from the beginning and tried Magisk v13.3 instead, which at least begins to install, but then fails to patch the boot image.
Does anyone have a working method they could describe here?
Solution
I figured it all out by myself in the end. For anyone else having trouble, here's what I did:
Made sure I had a backup of my DRM keys!!! I already had one from when I first rooted my phone on KitKat, but I decided to make another backup using Universal TA Backup v2, just in case anything was wrong with the original.
Obtained the official Marshmallow 23.5.A.1.291 firmware from XperiFirm, created a .ftf file with Flashtool, unlocked the bootloader on my device and flashed the .ftf file via Flashtool.
Flashed TWRP custom recovery via fastboot.
Extracted the stock kernel.elf boot image from the .ftf file using Flashtool.
Ran ta_poc on the kernel.elf file, answering "Y" when prompted to disable Sony RIC*. This produced a repacked boot.img with the DRM features added back in.
Copied the boot.img to my SD card.
Booted to Android and installed the Magisk Manager apk.
Used the "Install" button in Magisk Manager and selected the boot.img on my SD card.
Noted the location of the patched_boot.img that Magisk Manager created, then booted into TWRP and flashed patched_boot.img.
Booted back into Android and checked Magisk Manager status.
My device is now fully rooted, has all the DRM features intact and is passing all SafetyNet checks.
As an alternative to steps 7-9, you could simply flash the boot.img from step 6 via TWRP and then also flash the Magisk zip file via TWRP. You'd end up with exactly the same result at step 10.
I believe you could even complete the installation without TWRP or any custom recovery at all, by using Magisk Manager to create a patched_boot.img, then copying it to your PC and flashing it via fastboot.
* Disabling Sony RIC in my boot.img was what solved all my problems. This thread suggests you don't need to do that any more, but I couldn't get it to work without doing so.
Hi, I recently installed magisk 14, I get it to work. However, somehow it broke my wifi and LTE functionality. DNS NOT FOUND. I have a m4 aqua with 6.0.1 ver.1.33. Do you have any idea what could be the cause of this problem?
Enviado desde mi E2306 mediante Tapatalk
any know magisk for Z3 Compact Docomo MM 6.1 Bootloader Lock ?
Hi nogaff,
I tried your solution but there are two difficulties I can't resolve:
1) Where can I download a valid TWRP image for the Sony Xperia Z4 Tablet? My search in the internet was without success, and TWRP doesn't seem to support this device.
2) I used the same procedure to patch the kernel:
TA_POC'd the kernel with disabling DM-verity and disabling Sony-RIC
copied this image to a SD-card
put the SD-card into my SGP771
patched this image with Magisk 22.1 (this version of Magisk supports officially my Android 7.1.1)
flashed this image using FlashTool (because I don't have a TWRP recovery for the SGP771) - flashing ended without error!
BUTThe SGP771 stucks in a boot loop!!!Can you tell me if I forgot something?
Regards
Ansgar
So here's what I did:
I have my Galaxy S7 with Android 6, rooted with SuperSU.
Upgraded it to Android 7 using Smart Switch. Root is lost, of course.
Assumed SuperSU was gone, went ahead and rooted with Magisk.
After a bit of fiddling, because the guy can't write English, I had it working perfectly.
Restored a backup of all my apps. SuperSU got installed as well, since it was part of the backup. So I deleted it again (just the app).
Decided to do the SafetyNet test. Result: CTS profile mismatch. This is usally due to remnants of SuperSU. So I guess it wasn't removed fully.
Reinstalled the SuperSU app (just the app, I don't dare installing it via TWRP).
Open SuperSU, only to find out "SU binary is occupied". So I can't let SuperSU do its automated full unroot either.
My goal is to:
Get rid of SuperSU completely
Use Magisk instead
Pass the SafetyNet check
I have tried:
I ran the Magisk uninstaller to see if I can let SuperSU do its "full unroot" thing. But it results in a boot loop. So that's a no go.
I ran this SuperSU uninstaller script through TWRP, but it doesn't appear to have done anything. The results are unchanged either way.
So, what do I do now?
Try uninstalling the one you have (I assume it's the magisk v12), install magisk v13 beta, and see what you get. Also, about the safetynet, there are plenty of others reasons that may lead it to not pass, not only supersu.
thany2 said:
So here's what I did:
I have my Galaxy S7 with Android 6, rooted with SuperSU.
Upgraded it to Android 7 using Smart Switch. Root is lost, of course.
Assumed SuperSU was gone, went ahead and rooted with Magisk.
After a bit of fiddling, because the guy can't write English, I had it working perfectly.
Restored a backup of all my apps. SuperSU got installed as well, since it was part of the backup. So I deleted it again (just the app).
Decided to do the SafetyNet test. Result: CTS profile mismatch. This is usally due to remnants of SuperSU. So I guess it wasn't removed fully.
Reinstalled the SuperSU app (just the app, I don't dare installing it via TWRP).
Open SuperSU, only to find out "SU binary is occupied". So I can't let SuperSU do its automated full unroot either.
My goal is to:
Get rid of SuperSU completely
Use Magisk instead
Pass the SafetyNet check
I have tried:
I ran the Magisk uninstaller to see if I can let SuperSU do its "full unroot" thing. But it results in a boot loop. So that's a no go.
I ran this SuperSU uninstaller script through TWRP, but it doesn't appear to have done anything. The results are unchanged either way.
So, what do I do now?
Click to expand...
Click to collapse
I used the SuperSu android app. It has a full unroot (or was it uninstall?) option.
But I am on the op3. So not a 100% sure if that'll apply for the s7.
Sent from my ONEPLUS A3003 using Tapatalk
Dirty flash should remove all su or magisk, then you can install magisk again
abacate123 said:
Try uninstalling the one you have (I assume it's the magisk v12), install magisk v13 beta, and see what you get. Also, about the safetynet, there are plenty of others reasons that may lead it to not pass, not only supersu.
Click to expand...
Click to collapse
Uninstalling Magisk results in a boot loop, like I said. So it's a no-go.
What other reasons could it have when SafetyNet doesn't pass with that error message?
tropicanapure said:
I used the SuperSu android app. It has a full unroot (or was it uninstall?) option.
But I am on the op3. So not a 100% sure if that'll apply for the s7.
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
SuperSU has that option greyed out because of a locked binary, like I said, so that won't solve anything.
adekboreanaz said:
Dirty flash should remove all su or magisk, then you can install magisk again
Click to expand...
Click to collapse
Sorry, I don't understand what "dirty flash" is supposed to mean. It sounds like a risk.
thany2 said:
Sorry, I don't understand what "dirty flash" is supposed to mean. It sounds like a risk.
Click to expand...
Click to collapse
No it is not, dirty flash is flashing your rom again without deleting /system /data partition, that can replace your boot.img with the stock one, so the supersu will be disappeared
reflash boot.img from the rom you used via twrp on img mode (click zip or img to switch between modes) or reflash your desired custom kernel.