XT1064
I have this phone and updated to the latest upgrade XT1064_TITAN_RETUAWS_6.0_MPBS24.65-34-4_cid9_CFC.xml with fastboot. I'm in the US, so assuming this is the correct version.
It got past the "I have an unlocked bootloader page, but it's stuck on the M page, with the stitching. How long does this boot take the first time? So far, I think it's been going for 5+ minutes.
This are the commands I used to upgrade:
Code:
sudo fastboot flash partition gpt.bin
sudo fastboot flash motoboot motoboot.img
sudo fastboot flash logo logo.bin
sudo fastboot flash boot boot.img
sudo fastboot flash recovery recovery.img
sudo fastboot flash system system.img_sparsechunk.0
sudo fastboot flash system system.img_sparsechunk.1
sudo fastboot flash system system.img_sparsechunk.2
sudo fastboot flash system system.img_sparsechunk.3
sudo fastboot flash modem NON-HLOS.bin
sudo fastboot erase modemst1
sudo fastboot erase modemst2
sudo fastboot flash fsg fsg.mbn
sudo fastboot erase cache
sudo fastboot erase userdata
sudo fastboot reboot
I can still get into bootloader if I reboot.
SOLVED
I restarted the bootloader, installed TWRP, allowed modifications. Rebooted and the phone booted to the setup application (1 out of 4) and started up. Radio is working and everything is working as normal. Came from Krexus ROM.
Related
Hi,
I did not found the factory images anywhere in XDA, so thought to share this here.
Android 5.0 Lollipop Moto X 2014 XT1092 RETEUALL Factory Image.
Link: http://goo.gl/CQhJs2
Hope this helped.
Flashing steps as provided by Motorola site.:
Unzip the image.
Put your device in fastboot mode.
NOTE: You must use the Motorola fastboot utility to flash (included in the Darwin/, Linux/ or Windows/ directory). Please do NOT use the Android fastboot utility
Follow the flashing steps in the .xml file that was included in the package.
A typical flashing sequence includes all these partitions, but might vary depending on your product - so please use the sequence in the .xml file in your package:
$ fastboot flash partition gpt.bin
$ fastboot flash motoboot motoboot.img
$ fastboot reboot-bootloader
$ fastboot flash logo logo.bin
$ fastboot flash boot boot.img
$ fastboot flash recovery recovery.img
$ fastboot flash system system.img_sparsechunk.0
$ fastboot flash system system.img_sparsechunk.1
$ fastboot flash system system.img_sparsechunk.2
$ fastboot flash system system.img_sparsechunk.3
$ fastboot flash system system.img_sparsechunk.4
$ fastboot flash system system.img_sparsechunk.5
$ fastboot flash system system.img_sparsechunk.6
$ fastboot flash system system.img_sparsechunk.7
$ fastboot flash modem NON-HLOS.bin
$ fastboot erase modemst1
$ fastboot erase modemst2
$ fastboot flash fsg fsg.mbn
$ fastboot erase customize [leave that out if you have special customization from motomaker]
$ fastboot erase clogo [leave that out if you have special customization from motomaker]
$ fastboot reboot
You also have the option to erase all the data on your device with
$ fastboot erase userdata
$ fastboot erase cache
Thanks man. This will surely help. Is this Motorola signed images or extracted ones? Do you know?
Can't understand why some of you guys have such problems with this ROM
Hello
shawnchalfant said:
Can't understand why some of you guys have such problems with this ROM
Click to expand...
Click to collapse
Hey... how are you?
Nobody has problems with this rom, but here on xda people love to flash, wipe, flash, flash over and over... and having a stock a factory image is a "must have".
How does that zip work? just flash with a custom recovery or need fastboot flash?
Updated the post with steps, however you can flash the factory images by using Android SDK also and using the commands provided in the first post.
I actually posted this a few days ago but it got moved to the General section
http://forum.xda-developers.com/moto-x-2014/general/img-5-0-reteuall-xt1092-lxe22-46-19-t2997745
I think that the sequence of commands in the 1st post is not correct...inside the .zip file there are different named files.
The right sequence is in @kackburt guide
Can you not use RSDlite?
should work, yes.
Thanks, i have updated the commands. Actually that was for Android 4.4 as mentioned in Motorola site.
can I use Android Fastboot instead of Moto fastboot??I think yes...can you confirm??
This is already posted in the General section, linked above. Typically, device images aren't considered development.
Closed
Since I sideloaded the soak (build 23.1.28), I sorta screwed myself over from getting the OTA. Going around on XDA, I found a thread exactly highlighting my problem:
http://forum.xda-developers.com/moto-x-2014/general/how-to-upgrade-android-5-1-23-1-28-23-t3124578 [1]
The only problem is that I'm a noob that's new to Android. Unlocking the boot loader seems easy since Motorola got me with that. But the next part is weird for me. In the XDA link, they give me a link to a 5.0 image while Motorola has a legit image on their site. So that's confusing me.
And please, if you can, water the instructions down. Like dumbify it you can. Haha, thanks.
Forget that thread. Download the full 5.1 firmware from this thread:
http://forum.xda-developers.com/showthread.php?t=3148211
Then flash it with fastboot or rsdlite. Then you will be on the final 5.1 and don't need to downgrade nor take an ota.
Sent from my XT1095 using Tapatalk
AGISCI said:
Forget that thread. Download the full 5.1 firmware from this thread:
http://forum.xda-developers.com/showthread.php?t=3148211
Then flash it with fastboot or rsdlite. Then you will be on the final 5.1 and don't need to downgrade nor take an ota.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Is this the OTA file? Will it put me back on their lists for updates and what not?
Ownage516 said:
Is this the OTA file? Will it put me back on their lists for updates and what not?
Click to expand...
Click to collapse
No this is not the ota. When you flash it you will be on 5.1. No need to do anything else.
Sent from my XT1095 using Tapatalk
AGISCI said:
No this is not the ota. When you flash it you will be on 5.1. No need to do anything else.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Do you mind if you can give me the fast boot commands?
$ fastboot flash partition gpt.bin
$ fastboot flash motoboot motoboot.img
$ fastboot reboot-bootloader
$ fastboot flash logo logo.bin
$ fastboot flash boot boot.img
$ fastboot flash recovery recovery.img
$ fastboot flash system system.img_sparsechunk.0
$ fastboot flash system system.img_sparsechunk.1
$ fastboot flash system system.img_sparsechunk.2
$ fastboot flash system system.img_sparsechunk.3
$ fastboot flash system system.img_sparsechunk.4
$ fastboot flash system system.img_sparsechunk.5
$ fastboot flash system system.img_sparsechunk.6
$ fastboot flash system system.img_sparsechunk.7
$ fastboot flash modem NON-HLOS.bin
$ fastboot erase modemst1
$ fastboot erase modemst2
$ fastboot flash fsg fsg.mbn
$ fastboot erase userdata
$ fastboot erase cache
$ fastboot reboot
Sent from my XT1095 using Tapatalk
AGISCI said:
$ fastboot flash partition gpt.bin
$ fastboot flash motoboot motoboot.img
$ fastboot reboot-bootloader
$ fastboot flash logo logo.bin
$ fastboot flash boot boot.img
$ fastboot flash recovery recovery.img
$ fastboot flash system system.img_sparsechunk.0
$ fastboot flash system system.img_sparsechunk.1
$ fastboot flash system system.img_sparsechunk.2
$ fastboot flash system system.img_sparsechunk.3
$ fastboot flash system system.img_sparsechunk.4
$ fastboot flash system system.img_sparsechunk.5
$ fastboot flash system system.img_sparsechunk.6
$ fastboot flash system system.img_sparsechunk.7
$ fastboot flash modem NON-HLOS.bin
$ fastboot erase modemst1
$ fastboot erase modemst2
$ fastboot flash fsg fsg.mbn
$ fastboot erase userdata
$ fastboot erase cache
$ fastboot reboot
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Thanks. Btw, I'm just really curious. I thought the final build version was 23.16.3 or something like that.
It is. When you flash the file I linked, that is the version you will have.
Sent from my XT1095 using Tapatalk
Hi everyone.
Accidentally wiped the OS, apparently people fixed it using ADB. I'm trying to sideload a rom but adb says "Total xfer 0.00x" and my moto g says ADB Sideload Complete: Failed.
Any ideas how to fix this?
ADDED:
In case if someone wonders how I fixed this:
1) Reboot the phone into bootloader mode.
2) Open a command prompt / terminal (Start -> cmd.exe in Win7) and browse to the folder with the extracted firmware.
3) Connect your phone to your PC.
4) Flash stock firmware.
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot -w
some commands can not load
and no know such device:silly:
I just want to update my Moto x 2014 to android 5.1, but i dont know how, i do have unlocked bootloader, and uninstalled my root.
I also cant find the correct file, and i would like some more in depth instructions on exactly how to upgrade, the standard installation wont work BTW.
My info of my phone:
Android Version: 5.0
System Version: 22.121.1.victara_reteu.reteuall.en.EU reteu
Build- Number: LXE22.46-19.1
If anyone needs more info just tell me.
i dont know what to type said:
I just want to update my Moto x 2014 to android 5.1, but i dont know how, i do have unlocked bootloader, and uninstalled my root.
I also cant find the correct file, and i would like some more in depth instructions on exactly how to upgrade, the standard installation wont work BTW.
My info of my phone:
Android Version: 5.0
System Version: 22.121.1.victara_reteu.reteuall.en.EU reteu
Build- Number: LXE22.46-19.1
If anyone needs more info just tell me.
Click to expand...
Click to collapse
The easiest method would be to flash this firmware:
http://www.filefactory.com/file/i8htlx8fqpv/VICTARA_RETEU_XT1092_5.1_LPE23.32-25.3_cid7_CFC.xml.zip
After flashing it you will be on the latest 5.1 firmware.
To flash it, you have to extract the files in the zip. Put the phone into fastboot mode. Then use fastboot to flash the files with these commands:
$ fastboot flash partition gpt.bin
$ fastboot flash motoboot motoboot.img
$ fastboot reboot-bootloader
$ fastboot flash logo logo.bin
$ fastboot flash boot boot.img
$ fastboot flash recovery recovery.img
$ fastboot flash system system.img_sparsechunk.0
$ fastboot flash system system.img_sparsechunk.1
$ fastboot flash system system.img_sparsechunk.2
$ fastboot flash system system.img_sparsechunk.3
$ fastboot flash system system.img_sparsechunk.4
$ fastboot flash system system.img_sparsechunk.5
$ fastboot flash system system.img_sparsechunk.6
$ fastboot flash system system.img_sparsechunk.7
$ fastboot flash modem NON-HLOS.bin
$ fastboot erase modemst1
$ fastboot erase modemst2
$ fastboot flash fsg fsg.mbn
$ fastboot erase userdata
$ fastboot erase cache
The last 2 commands erase your data on the phone. They are optional, but sometimes bugs and errors happen if you don't do it. So if you have any issues after flashing, those last 2 commands usually fix them. Personally I recommend erasing your data(make a backup of course) because you are less likely to have issues.
Sent from my XT1095 using Tapatalk
Hello, im having a similar situación on my Moto X 2014 Pure Edition XT1095_ in which i have a custom recovery installed and xposed obviously with the bootloader unlock and root. As i am told the ota for marschmallow will not be succesful beacause of a modified partition (system) how do i flash the ota? Thanks
nicokeini said:
Hello, im having a similar situación on my Moto X 2014 Pure Edition XT1095_ in which i have a custom recovery installed and xposed obviously with the bootloader unlock and root. As i am told the ota for marschmallow will not be succesful beacause of a modified partition (system) how do i flash the ota? Thanks
Click to expand...
Click to collapse
Same process that I just mentioned. But for the xt1095 use this firmware:
http://www.filefactory.com/file/5d66szhobgmx/VICTARA_TMO_XT1095_5.1_LPE23.32-21.6_cid9_CFC.xml.zip
Sent from my XT1095 using Tapatalk
AGISCI said:
The easiest method would be to flash this firmware:
After flashing it you will be on the latest 5.1 firmware.
To flash it, you have to extract the files in the zip. Put the phone into fastboot mode. Then use fastboot to flash the files with these commands:
$ fastboot flash partition gpt.bin
$ fastboot flash motoboot motoboot.img
$ fastboot reboot-bootloader
$ fastboot flash logo logo.bin
$ fastboot flash boot boot.img
$ fastboot flash recovery recovery.img
$ fastboot flash system system.img_sparsechunk.0
$ fastboot flash system system.img_sparsechunk.1
$ fastboot flash system system.img_sparsechunk.2
$ fastboot flash system system.img_sparsechunk.3
$ fastboot flash system system.img_sparsechunk.4
$ fastboot flash system system.img_sparsechunk.5
$ fastboot flash system system.img_sparsechunk.6
$ fastboot flash system system.img_sparsechunk.7
$ fastboot flash modem NON-HLOS.bin
$ fastboot erase modemst1
$ fastboot erase modemst2
$ fastboot flash fsg fsg.mbn
$ fastboot erase userdata
$ fastboot erase cache
The last 2 commands erase your data on the phone. They are optional, but sometimes bugs and errors happen if you don't do it. So if you have any issues after flashing, those last 2 commands usually fix them. Personally I recommend erasing your data(make a backup of course) because you are less likely to have issues.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Isnt there a faster download?
Hey, i have succesfully updated my moto X, but now i of course want to root it again, how do i do that, because i cant find the right file for my phone.
Marschmallow?
i dont know what to type said:
Hey, i have succesfully updated my moto X, but now i of course want to root it again, how do i do that, because i cant find the right file for my phone.
Click to expand...
Click to collapse
Just flash TWRP. Then start TWRP. When you exit TWRP it will ask if you want to root it. Very simple.
nicokeini said:
Marschmallow?
Click to expand...
Click to collapse
No, it has not been released yet. He upgraded to the latest lollipop.
Sent from my XT1095 using Tapatalk
Ok 6.0 is another story
Hi guys, I'm doing this tutorial because I didn't find a complete tutorial on how to restore our Moto X 2014 to stock 6.0 marshmallow.
As I asked here for help, I tried encrypting the phone when using LineageOS but it failed and then bootlooped, so I needed to reflash the stock ROM because the formating though TWRP failed too.
I used a Linux distro to do the job. For windows I think there are scripts out there which do the job, and of course you can adapt the commands given here to work with Windows (i.e. changing "sudo fastboot" to "fastboot.exe").
Note: My device is a XT1097 variant and the boot loader was already unlocked. There's also a Zip file for those who have a working TWRP recovery already.
Download the ROM files here: EU variant // RET LA + NIIMX variants
The file I used for this tutorial was: Motorola_Moto_X_XT1097_VICTARA_RETLA_6.0_MPES24.49-18-3_cid12_6.0.zip
Setup of the computer:
1- Install androidtools-fastboot & androidtools-adb
[Optional] 2- Install libmtp package too
Setup of the phone:
1- Reboot your phone into fastboot mode (press power and vol down toghether)
2- Connect the phone to PC
3- Extract the content of the Zip file & enter the folder
4- Open a new terminal inside the folder called "Firmware"
5- Execute these commands below (one command per line)
Bash:
sudo fastboot flash partition gpt.bin
sudo fastboot flash motoboot motoboot.img
sudo fastboot flash boot boot.img
sudo fastboot flash recovery recovery.img
sudo fastboot flash system system.img_sparsechunk.0
sudo fastboot flash system system.img_sparsechunk.1
sudo fastboot flash system system.img_sparsechunk.2
sudo fastboot flash system system.img_sparsechunk.3
sudo fastboot flash system system.img_sparsechunk.4
sudo fastboot flash system system.img_sparsechunk.5
sudo fastboot flash system system.img_sparsechunk.6
sudo fastboot flash system system.img_sparsechunk.7
sudo fastboot flash system system.img_sparsechunk.8
sudo fastboot flash system system.img_sparsechunk.9
sudo fastboot flash modem NON-HLOS.bin
sudo fastboot erase modemst1
sudo fastboot erase modemst2
sudo fastboot flash fsg fsg.mbn
sudo fastboot erase cache
sudo fastboot erase userdata
sudo fastboot erase customize
sudo fastboot erase clogo
[Optional] Tip: If you want to reset the Motorola logo too (it will display again the warning regarding the bootloader unlock, this is why I skipped it), execute the command below just before entering boot.img command
Bash:
sudo fastboot flash logo logo.bin
6- Reboot the phone just in case
Bash:
sudo fastboot reboot-bootloader
7- Reboot the phone into the system
Bash:
sudo fastboot reboot
8- Wait several minutes on the animation booting screen
9- Done, the phone should now show the "Welcome" greenish screen
10- After the initial setup, go to the PlayStore and update your Google Play Services app before updating/installing other apps
I based my tutorial on this post here by @seco2004 and in this post forum here by Junior Gomes. Thanks for all the devs for the hard work with this amazing (besides the battery duration) phone and for that website for hosting all Motorola's stock ROMs at GDrive.