Guys can anyone help me out...I was trying to go back to stock rom..so I installed 3.2.6 using twrp..and all went successfully..I booted..stock recovery came..I got an update immediately...I tried to update it..but it going into recovery and said failed....so what I did was ..again I unlocked my bootloader installed twrp....NOW THE PROBLEM STARTED ...if u open twrp it's asking for password..I gave all but it's saying wrong ...so now if I try to install stock recovery it's not flashing....IF I SIDELOAD USING TWRP ITS SAYIN SOKE SYSTEM PARTITION CHANGED..PLS HELP ME..but my phone is in working condition...I can use it normally ..but no recovery...[emoji24] [emoji24] [emoji24] [emoji24]
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
hello, please follow this guide
http://www.techmuffin.it/2016/10/guida-ritorno-allo-stock-su-oneplus-3/
Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk
Hello, you came from community build?
If yes click here: http://forum.xda-developers.com/oneplus-3/how-to/downgrade-oxygenos-3-5-2-to-3-2-6-root-t3465850
cargobr151 said:
Hello, you came from community build?
If yes click here: http://forum.xda-developers.com/oneplus-3/how-to/downgrade-oxygenos-3-5-2-to-3-2-6-root-t3465850
Click to expand...
Click to collapse
No I never used community builds
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
Guys thanks for ur valuable suggestions... I went to service center and they solved by issue by flashing a software.. Thanks for ur valuable replies... I will save those above links for future use
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
[emoji1] [emoji1]
Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk
Related
Hi there! When I open the default camera I see a message : no gradient, first color will be applied! What's up?
Inviato dal mio C6903 utilizzando Tapatalk
Your camera app have a problem!
Backup and flash a new and fresh firmware.
Sent from my C6903 using Tapatalk
DonutCommander said:
Hi there! When I open the default camera I see a message : no gradient, first color will be applied! What's up?
Inviato dal mio C6903 utilizzando Tapatalk
Click to expand...
Click to collapse
Have you tried clearing data from all camera apps
f_u_006 said:
Your camera app have a problem!
Backup and flash a new and fresh firmware.
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
Allthough this should work, its a bit extreme to advise a full wipe and flash a FTF for every problem, especially when there are other problem solving techniques you can use for problems with specific apps.
I have cleared the data of the app and now it's OK!
Inviato dal mio C6903 utilizzando Tapatalk
DonutCommander said:
I have cleared the data of the app and now it's OK!
Inviato dal mio C6903 utilizzando Tapatalk
Click to expand...
Click to collapse
Best of luck!
Always remember to WIPE EVERYTHING when upgrade your ROM to latest version which has major update.
Please mark this as [SOLVED], also edit OP, and post the solution there to help someone who have same problem with you! :highfive:
Anybody has same issues ??
XDADEVX said:
Anybody has same issues ??
Click to expand...
Click to collapse
Yes. Is the mediaserver process that is bugged. A way to temporary solve the problem is a reboot.
Removing SD card also mitigate somewhat.
Sent from my HUAWEI P7-L10 using XDA Free mobile app
I was downloading a video via 4g and it reached 50 degrees Celsius.
Inviato dal mio HUAWEI P7-L10 con XDA Forums Pro.
luca3011 said:
I was downloading a video via 4g and it reached 50 degrees Celsius.
Inviato dal mio HUAWEI P7-L10 con XDA Forums Pro.
Click to expand...
Click to collapse
any ideas how to downgrade?
XDADEVX said:
any ideas how to downgrade?
Click to expand...
Click to collapse
If somebody wants to install again kitkat, first install http://consumer.huawei.com/it/support/downloads/detail/index.htm?id=48763 then flash full 609 http://www.huaweiblog.de/huawei_firmware_downloads/ascend-p7-downloads/ and you are back on kitkat
black_ps said:
If somebody wants to install again kitkat, first install http://consumer.huawei.com/it/support/downloads/detail/index.htm?id=48763 then flash full 609 http://www.huaweiblog.de/huawei_firmware_downloads/ascend-p7-downloads/ and you are back on kitkat
Click to expand...
Click to collapse
i already done it .. installed b800 and then b609
How to install these? Via stock recovery?
Yes, stock recovery.
Sent from my HUAWEI P7-L10 using XDA Free mobile app
not working
hellow this is not working i managed to go back to B800 but now i cant get out of it, when i go to the updater there is no menu in it only shows your system is up to date and check for update on the bottom right how do i get out of this?
most of you didnt know that there is now an official miui 7 rom for us
its been 3 days of testing its the most stable rom yet with no bugs and everything working like a charm
Noticeable Features
fast, stable, less ram usage, less battery usage, more smoothness, more beauty and design and animations, every app is working, settings have alot more options and comes with huawei settings too!!!
Installation
Just own the last TWRP recovery and wipe data + wipe davlk cache and install it! thats it! and from any emui you have you can flash this rom
NEW UPDATE 5.11.07"
Download Link
http://miuirom.xiaomi.com/rom/u142590138/5.11.7/miui_p7td_slydermi_5.11.7_95435f1cc6_4.4.zip
thank me later
Not working for l10 & still for l07
Working or not working for P7-L10 ?
Inviato dal mio HUAWEI P7-L10 utilizzando Tapatalk
leleallof said:
Working or not working for P7-L10 ?
Inviato dal mio HUAWEI P7-L10 utilizzando Tapatalk
Click to expand...
Click to collapse
NO Network for L10 , I Tested it
That ROM will work only if you choose airplane mode Useless , Any way you will not be able to contact with network
Inviato dal mio HUAWEI P7-L10 utilizzando Tapatalk
I don't know where modem files are located in the P7 firmware, but it should be possible to copy files from the factory firmware. If anyone know where they are located it would be good position to try.
Sent from my HUAWEI P7-L10 using XDA Free mobile app
miljenko said:
I don't know where modem files are located in the P7 firmware, but it should be possible to copy files from the factory firmware. If anyone know where they are located it would be good position to try.
Sent from my HUAWEI P7-L10 using XDA Free mobile app
Click to expand...
Click to collapse
Uhm maybe if you download b609 or b619 firmware and extract it with Huawei update.app extractor, maybe you then can find it easily.
Would be nice if the L10 version at least has a other custom rom that works
Sent from my SM-T530 using XDA Free mobile app
Hey, I extracted (all I hope) modem.img´s of B609. Links will follow in some minutes due to very slow upload speed. I also repacked all imgages to update.app´s, don´t know if it will work to flash stock recovery and then the update.app files. ( I´m not able to create flashable zips unfortunately.. Maybe you are?) Would be great if someone could try them out. Working Miui would be so damn great!
Edit: Btw congratulations to your 1000. Post @itsthepeanut :good:
Edit2: here is the link: https://mega.nz/#F!oUtmDBZI!C41Ua8RNWTojIzFqv_4_GQ
l3Nni said:
Hey, I extracted (all I hope) modem.img´s of B609. Links will follow in some minutes due to very slow upload speed. I also repacked all imgages to update.app´s, don´t know if it will work to flash stock recovery and then the update.app files. ( I´m not able to create flashable zips unfortunately.. Maybe you are?) Would be great if someone could try them out. Working Miui would be so damn great!
Edit: Btw congratulations to your 1000. Post @itsthepeanut :good:
Click to expand...
Click to collapse
Are you seriously checking my profile lol
Sent from my SM-T530 using XDA Free mobile app
its the peanut said:
Are you seriously checking my profile lol
Sent from my SM-T530 using XDA Free mobile app
Click to expand...
Click to collapse
If you view XDA with a desktop-browser you see the count at the left of any post
l3Nni said:
If you view XDA with a desktop-browser you see the count at the left of any post
Click to expand...
Click to collapse
I never use desktop lol
Sent from my SM-T530 using XDA Free mobile app
---------- Post added at 07:44 PM ---------- Previous post was at 07:42 PM ----------
Just for those who are trying to fix the com.android.phone problem... please make a new thread for it so it will be easier to find.
Sent from my SM-T530 using XDA Free mobile app
Guys sorry i was busy last days any way i used to be on b813 emui3.1 only thing i did was installing twerp recovery and installed miui zip eveverything is working fine its been a week tho
abdullaHD said:
Guys sorry i was busy last days any way i used to be on b813 emui3.1 only thing i did was installing twerp recovery and installed miui zip eveverything is working fine its been a week tho
Click to expand...
Click to collapse
And you have P7-L10?
Lähetetty minun HUAWEI P7-L10 laitteesta Tapatalkilla
abdullaHD said:
Guys sorry i was busy last days any way i used to be on b813 emui3.1 only thing i did was installing twerp recovery and installed miui zip eveverything is working fine its been a week tho
Click to expand...
Click to collapse
Even com.android.phone?
Verstuurd vanaf mijn HUAWEI P7-L10 met Tapatalk
I think we already diskussed this in other Miui threads.. Its depending in your operator whether it works or not. So, Vodafone gets the error, Telekom ( if I remember right) not..
Ottomaani0 said:
And you have P7-L10?
Lähetetty minun HUAWEI P7-L10 laitteesta Tapatalkilla
Click to expand...
Click to collapse
Finally... on P7-L10 works fine or not ? Someone tried it ?
Inviato dal mio HUAWEI P7-L10 utilizzando Tapatalk
leleallof said:
Finally... on P7-L10 works fine or not ? Someone tried it ?
Click to expand...
Click to collapse
No, still not working
Make versión l10 please
Enviado desde mi HUAWEI P7-L10 mediante Tapatalk
Well I used it for a half a day without running in to any problems. Everything else worked except that when I got a call from a person using the same operator as me the calls would be distorted. All other calls worked fine.
Too bad, really loved the ROM. Would have been my daily driver without that bug.
Just pop this here for seeking out the Com.android.phone force close.
When flashing the rom, try to use CMW recovery for this instead of TWRP. It may or may not work, but just to make sure we dont oversee this.
And maybe try other methods from other devices that runs miui, maybe we can pick something out of there that solves this.
Verstuurd vanaf mijn HUAWEI P7-L10 met Tapatalk
Hi sorry for my english
How can i do ram fix without root?
Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk
You can't
Sent from my Nexus 7 2013 using Tapatalk
Tabs78 said:
Hi sorry for my english
How can i do ram fix without root?
Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk
Click to expand...
Click to collapse
System files should be edited, so, root is required.
Just wait for the upcoming OTA
http://www.androidauthority.com/inc...g-srgb-mode-and-better-ram-management-699808/
yes u can without root via adb commands.
http://www.xda-developers.com/how-t...-management-almost-double-the-apps-in-memory/
AcmE85 said:
Just wait for the upcoming OTA
http://www.androidauthority.com/inc...g-srgb-mode-and-better-ram-management-699808/
Click to expand...
Click to collapse
Ah sweet! I didn't want to root particularly.
r47z said:
yes u can without root via adb commands.
http://www.xda-developers.com/how-t...-management-almost-double-the-apps-in-memory/
Click to expand...
Click to collapse
Have you actually tested this? ADB often doesn't let you push to the system partition without root, I haven't tried this with the OP3 though. Another way to do it is using terminal in TWRP for example, you can use vi to edit the build.prop file. It's worth nothing though that this prevents you from installing OTA updates just like rooting would since you've now modified the system partition.
I've just tested a method from the OP3T forum for reset the DM-verity and removing the second(with red colour) screen on booting.
I'm currently on LAOS and I've TWRP, so you don't need to be completely stock for this to work
Installation:
For 4.0.2 - Do the steps 4 and 5 and just boot your phone.
For 4.0.3 and up - Do all the steps
1) Boot to Recovery
2) Flash 4.0.2 firmware + modem / FOR OP3 / FOR OP3T
3) Reboot to bootloader
4) Use the commands ( result was Okay for each command)
fastboot oem disable_dm_verity
fastboot oem enable_dm_verity
5) Reboot to Recovery
6) Flash your current firmware + modem
7) Reboot to system
Nothing will be deleted from your storage or something like this, its safe(at least on my device )
Credits to @jamal2367 and @djsubterrain for the firmware zips and to @hyperorb for testing and providing the steps
All credits for founding the commands to @th3g1z
excuse you say the second screen with the red word or, the first appearing after the bootloader? thank you
rena71rai73 said:
excuse you say the second screen with the red word or, the first appearing after the bootloader? thank you
Click to expand...
Click to collapse
Yes, the second screen with the DM-verity error as the title says. The first one is because of the unlocked bootloader
OK thanks[emoji6]
Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk
Has someone tried this and confirm? Waiting for someone to be the guinea pig.
rena71rai73 said:
OK thanks[emoji6]
Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk
Click to expand...
Click to collapse
Is it possible from terminal emulator?
Sent from my ONEPLUS A3003 using XDA-Developers Legacy app
isoladisegnata said:
Is it possible from terminal emulator?
Sent from my ONEPLUS A3003 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Obviously not as you need to be in bootloader ...
Sent from my OnePlus 3 using Tapatalk
Working for me
siankatabg said:
All credits to @th3g1z for this, go and give him "Thanks"
Click to expand...
Click to collapse
Confirmed works like a charm. Thanked both of you, you also deserve some credit for notifying us [emoji106]
Sent from my OnePlus 3 using Tapatalk
abhibnl said:
Has someone tried this and confirm? Waiting for someone to be the guinea pig.
Click to expand...
Click to collapse
Lol, did you read the first post? I was the guinea pig, as I never post things that are not tested by me first
Worked like a charm! Saved a few seconds on my boot time
Flashing a custom gapps package, system sound modification zip I've used for years, magisk and blu_spark kernel didn't result in any issues or loops or that message reappearing either. Cool beans!
After curiosity struck, I loaded up the 3.2.8 bootloader into a hex editor and found the blatantly obvious help command. There's lots of fastboot commands in there. Attached a screenshot.
I didn't try them because I don't know what they do, I'd advise you stick with that precaution as well.
(P.S: the 4.0.2 bootloader has the selinux command removed, I downgraded my firmware to test that one out)
Working for me thank you!!
siankatabg said:
Lol, did you read the first post? I was the guinea pig, as I never post things that are not tested by me first
Click to expand...
Click to collapse
You sir, just made me realize how dumb i've become nowadays I will definitely try this out this weekend.
It works on op3T?
Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk
rena71rai73 said:
It works on op3T?
Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk
Click to expand...
Click to collapse
Yes. Read the first post.
It works
Sent from my ONEPLUS A3003 using XDA Labs
Great findings!
worked like charm. thanks for the post.
Simply, fantastic!
Yes! Thank you! For such a simple fix I'm surprised it wasn't found sooner!