I'm trying to get USB debugging working on my new note 5, I'm in Web Development, so I use Chrome Device debugging quite a bit.
I can enable USB Debugging in Developer Tools, and then select file transfer from the options after I plug in the USB cord.
I have installed the Samsung drivers, but Chrome never sees my note 5 as a connected device. (The computer does however).
I also never see the USB icon on the phone, saying it's connected for debugging.
Any thoughts?
Related
Hi,
A friend of mine is owning a Samsung Galaxy S (in Austria). The strange thing is that Windows doesn't show the "new hardware found" popup when the phone is connected via USB cable to the PC. I have set Android to ask for the connection type if USB cable is plugged in.
My HTC is recognized by Windows without any driver, etc.
Any ideas what could be the problem here?
Thanks in advance.
DITC101
Check that USB debugging is unchecked! (Settings > Applications > Development > Uncheck USB debugging)
If it was already unchecked, try a different USB port or different microUSB cable. ^_^
No Samsung drivers installed .
Normal route to use hardware on a PC is to install the products drivers .
Samsung comes with Kies software . Install that for USB drivers .
jje
So I just got my bootloader unlocked today. I went home this evening to plug my phone into my computer and start installing the custom recovery, only to find that both computers in my house won't recognize the phone when it's plugged in. To my dismay, no USB icon showed up in the status bar, and it just said "Charging". No notification in Windows (or the Ubuntu computer either). Either my cable has gone bad and only charges, or the original cable doesn't transfer data. I've also checked to make sure that Media Device (MTP) is checked. Funny thing was I was using the cable from my OG Droid at work today to charge my phone on the work computer. I know the USB Debugging icon had shown up so I know it was working properly, it won't show up on my computers at home.
Can anyone confirm with me that the original cable is USB only?
No, the original cable should do both. Try another cable though, or use port on the pc. Otherwise it's your drivers on the pc.
You have USB debugging checked in developer options? You have drivers installed on your computer? Making sure to use the USB port on the back of the computer, not the front?
Sent from my XT1060
I bought the Tronsmart Data Cables USB-C to USB-A knowing the cable that came with the box was only a charging cable. But still my computer won't recognize my Mi 5 64Gb. Any thoughts on this? Thanks in advance.
P.S. I have also installed the MI PC Suite. Still failing.
northropgrummanrq180 said:
I bought the Tronsmart Data Cables USB-C to USB-A knowing the cable that came with the box was only a charging cable. But still my computer won't recognize my Mi 5 64Gb. Any thoughts on this? Thanks in advance.
P.S. I have also installed the MI PC Suite. Still failing.
Click to expand...
Click to collapse
MiSuite is useless for now, as this thing doesn't support Android 6.
Just connect the phone with a cable to the Computer. I use the Xiaomi Mi4c cable, the original mi 5 is still in the box but both work to transfer data!
All you have to do is:
-Connect the phone to the pc with Usb C to A
-Change the connection mode from "Use USB for Charging only" to "Use USB for Transfer files (MTP)"
Uh and could you please explain the difference between a USB C to USB A charging cable and a USB C to USB A data-transfer cable? The more details you add the better. I am specially curious about the wires inside of the cable, like the difference between a charging and data cable, by the means of wire connection. (I have never heard of such a thing.)
I have tried doing that but it seems Windows is not installing the drivers for Mi 5 thus getting a "device could not be recognized.
Working great now. Had to change USB ports and used the ones at the rear of my desktop. Thanks!
northropgrummanrq180 said:
Working great now. Had to change USB ports and used the ones at the rear of my desktop. Thanks!
Click to expand...
Click to collapse
mine has the same problem with you..
when connected Mi 5 to PC, Mi 5 is not displaying "Charging Only" or "MTP" Option. My PC (Win 7) says "Device is not Recognized".
I've tried uninstalling Mi PC Suite and another ADB program, and changing usb port, the problem is stills..
How do you fix it?
I had the same problem. But changing to a different USB-port on my computer solved it. Check if you have any native USB3 ports on your mobo.
I had the same issue on my Win8 computer (usb2 plugs only) . But it connected perfect on my wife's win7 computer (usb3 plugs)
I finished getting it connected by validating USB debug and waiting very long for driver installation.
USB3 versus USB2 , why not.
Its Not USB2 vs USB3 as I am getting it connected on my Laptop with only USB2 ports but Can't connect on my PC with USB2/USB3 ports while my S7 connects perfectly. I dunno why this is happening and still seeking solution. PTP mode and USB tethering mode works fine though. Just MTP mode connection gets the Yellow triangle and device listing under other devices in my windows device manager.
Install the software driver of the pc and connect as mtp
Dont work anything
I change it to MTP but it comes back by itself to charging mode wtf
Go to device manager after connecting usb to phone
In portable devices, you will find your device along with a caution sign
Double click on your device
Go to driver tab
Then click on update driver
Then click on "Browse my computer..."
Then click on "Let me pick..."
Select MTP USB Device
Install this driver and then your phone will be detected by your computer
(1) Go to C:\Windows\INF
(2) Type "wpdmtp.inf" in search bar provided to the right of the address bar in Windows 10.
(3) Once you found it, just right click on it and select install. It will take a very few seconds.
(4) Connect your device to the pc.
ONE SIMPLE SOLUTION TO CONNECT REDMI Y3 TO PC WINDOWS 10
This worked for me. You can also try.
First connect your YOUR REDMI Y3 ANDROID PHONE to the PC with the USB POWER CABLE provided with REDMI Y3 phone
Now on your ANDROID PHONE
Go to>SETTINGS
Go to>ABOUT PHONE
Tap MIUI VERSION Twice or Thrice>You will be recognized as a Developer
Now go back to SETTINGS
Select>ADDITIONAL SETTINGS
Select>DEVELOPER OPTIONS
Scroll down to locate DEFAULT USB CONFIGURATION and select it
Now Select>FILE TRANSFER
Now check your PC
Your REDMI Y3 will be RECOGNISED
My MiA2, i cant able to connect usb drivers using otg cable, is there any thing i have do before connecting that ...please suggest...
selva03 said:
My MiA2, i cant able to connect usb drivers using otg cable, is there any thing i have do before connecting that ...please suggest...
Click to expand...
Click to collapse
I'm guessing here, but do you mean a usb device? not usb drivers? Drivers you would install on your computer, a usb device u would plug into the other end of an OTG cable, right?
If you're talking about a usb device, like a usb stick, before connecting the usb stick with the otg cable, go to the development options and page down about 2/3 of the way and you can select what 'type' of usb connection to make... one is charging only, etc etc.
the one to select is MTP (media transfer protocol), then the usb stick should work.
Yes it's USB device, when I am trying to connect it via otg cable in my mobile it's doesn't open in my mia2
selva03 said:
Yes it's USB device, when I am trying to connect it via otg cable in my mobile it's doesn't open in my mia2
Click to expand...
Click to collapse
If the file system on the usb is ntfs then it won't work
In any case, if it still doesn't work, you can use this app
https://play.google.com/store/apps/details?id=com.paragon.tcplugins_ntfs_ro
So it wasn't working on the pie beta but I didn't bother writing it here because I thought it was a beta so meh. Now since it's stable now, I am still unable to connect my Flash Drive to my phone. When I connect my usb to it, it does recognize the USB but then that's it. Like when I connect my usb, it doesn't show the usb in the "Files" or even in my 3rd Party files explorer. When I drag down the notification panel, it actually shows that a device has been connected and when I tap on that I'm redirected to a menu where there are 2 options. so is anyone else facing the same issue on Mi a2 or is it just me? Or am I doing something wrong?
Tsegaye matalo said:
So it wasn't working on the pie beta but I didn't bother writing it here because I thought it was a beta so meh. Now since it's stable now, I am still unable to connect my Flash Drive to my phone. When I connect my usb to it, it does recognize the USB but then that's it. Like when I connect my usb, it doesn't show the usb in the "Files" or even in my 3rd Party files explorer. When I drag down the notification panel, it actually shows that a device has been connected and when I tap on that I'm redirected to a menu where there are 2 options. so is anyone else facing the same issue on Mi a2 or is it just me? Or am I doing something wrong?
Click to expand...
Click to collapse
I have the same issue. Tried with Mi A3 (Android 10) and it works normally. Plug into Mi A2 (Android 10) and it shows that device connected. Android System notification says -> Charging connected device via USB, tapping it shows USB Preferences. USB Preferences show that Usb Controlled By -> Connected Device and doesn't allow to change the option.
Maracon said:
I have the same issue. Tried with Mi A3 (Android 10) and it works normally. Plug into Mi A2 (Android 10) and it shows that device connected. Android System notification says -> Charging connected device via USB, tapping it shows USB Preferences. USB Preferences show that Usb Controlled By -> Connected Device and doesn't allow to change the option.
Click to expand...
Click to collapse
both of you should use stock pie stable miui and it will work.
for extra certainty try mixplorer and give it root with magisk and select the custom.otg driver option
in many cases the otg adapter you are trying to use might be crap ..
in many cases the charging port wasn't working and repair soldered on an unofficial part now it can only charge and otg or usb cable data to pc can't work
options:
1. connect usb to usb port on your router and use samba plugin from mixplorer to access it over the network ...
2. connect usb to your mia3 and send the file with midrop to.your mia2
Hi,
I have a problem with my Samsung Tab S2 9,7" (2016)
When i connect my Tablet to my PC, it dont recognize my tablet.
It only charges.
ive tried:
1) Other cables
2) Other Computers
3) Samsung USB Driver
4) enable Developer mode, enable USB Debugging
5) enable Developer mode, enable MTP (no sign of connecting)
6) Checked device manager on windows, not even a unknown device was found.
7)....
i always get the sign of charging, but not a sound of connecting with windows...
please help me!
Grtz
Karroowte
It sounds like the USB port may actually be bad. Is this tablet stock? If you have TWRP installed you may try connecting it from recovery. You might also try from Linux booted from a flash drive to take Windows out of the equation. The data pins and the power pins or separate, so it may just be that the data pins have been damaged.
Does the cable feel loose in the tablet?