Related
Hi, I live in Egypt for a while and I bought last month a Mini. Everything was going just fine, I was using Odin many times to try new roms, and CWM Recovery to give a try to custom roms, without problems. Yesterday morning I flashed my device with the 2.3.6 rom that I found on this forum, apparently made for Latin America. Since that moment, my mobile is on boot loop, i can't do anything, I only can access downloading mode, I tried to reflash gingerbread 2.3.4, and2.3.5, it goes well, Odin gives me the PASS message, but still my mobile is forever rebooting at Samsung logo. I can't access recovery.
What to do? Is it bricked and do I have to send it to Samsung Center or is there hope to fix it by myself?
Thank you for any help...
Yohan
u cant even enter recovery?if u can,just wipe cache and data..
Sent from public phone using 10cents.
ybregeon said:
Hi, I live in Egypt for a while and I bought last month a Mini. Everything was going just fine, I was using Odin many times to try new roms, and CWM Recovery to give a try to custom roms, without problems. Yesterday morning I flashed my device with the 2.3.6 rom that I found on this forum, apparently made for Latin America. Since that moment, my mobile is on boot loop, i can't do anything, I only can access downloading mode, I tried to reflash gingerbread 2.3.4, and2.3.5, it goes well, Odin gives me the PASS message, but still my mobile is forever rebooting at Samsung logo. I can't access recovery.
What to do? Is it bricked and do I have to send it to Samsung Center or is there hope to fix it by myself?
Thank you for any help...
Yohan
Click to expand...
Click to collapse
Just remove the battery and stop your phone.
Put the battery in again.
Go to recovery mode by pressing Home + Power button at the same time.
In the reocevey choose wipe data/factory reset option.
Reboot your device after you are done.
You mobile will boot up fine.
Thank you for your answers but I wanna insists on a point: I can't access recovery at all, the phone show me the samsung logo for about half a second then restarts, and is looping in this state. No recovery, only downloading mode and RAMDUMP Mode (ARM9 mode) & Emergency Dload Mode (ARM9 Mode). Nothing else is avalaible.
Helppp
ybregeon said:
Hi, I live in Egypt for a while and I bought last month a Mini. Everything was going just fine, I was using Odin many times to try new roms, and CWM Recovery to give a try to custom roms, without problems. Yesterday morning I flashed my device with the 2.3.6 rom that I found on this forum, apparently made for Latin America. Since that moment, my mobile is on boot loop, i can't do anything, I only can access downloading mode, I tried to reflash gingerbread 2.3.4, and2.3.5, it goes well, Odin gives me the PASS message, but still my mobile is forever rebooting at Samsung logo. I can't access recovery.
What to do? Is it bricked and do I have to send it to Samsung Center or is there hope to fix it by myself?
Thank you for any help...
Yohan
Click to expand...
Click to collapse
hey man i've already had that problem..coz i flash 2.3.6 and encountered same problem but i manage to fix it.. you need to enter recovery mode... Note: you need to hold the home & power button and wait for the samsung logo to flash TWICE (2X),when the 2nd logo flash, just realease the buttons and your on recovery mode.just wipe/ data reset.. right now im using Ginger bread 2.3.6JKVT and its rooted also.
No, I can't access recovery sorry.
Connect your phone to your laptop.
Use ADB
Type this :
adb shell reboot recovery
That will take you to download mode,then you can flash rom again. It would be easier if you have a CWM installed
Sent from my GT-I5500-MADTEAM using Tapatalk
Shall I use Downloading mode to do this?
ybregeon said:
Shall I use Downloading mode to do this?
Click to expand...
Click to collapse
If you can't access recovery either falsh CWM recovery or Flash another firmware from Download mode. If you want to flash CWM recovery just follow the link below for Galaxy Mini and search CWM recovery.
I tried many times, since i have this problem, to flash and reflash, official roms, CWR, but nothing works, setup goes fine according to Odin, but still have the problem on my phone, still only downloading mode works, and still a flashing screen, just during the samsung logo.
No one can help me with my mobile???
ybregeon said:
No, I can't access recovery sorry.
Click to expand...
Click to collapse
did you wait for the samsumg logo to flash tiwce while holding the combo key? you see when im installing firmware using odin my laptop turn off coz i dont have a battery i thought my mini was brick because the process was not finish,so what happen i tried to acces recovery mode its only shows a computer icon & phone icon. but i manage to fix the problem i go to download mode and flash again another firmware. and everything goes fine..so how come that you cant access recorvery...i would suggest that you flash a firmware with 4 parts not a single package.
just try this www*mediafire*com/?br3r8fod5g3vud4 flash this firmware with Odin this will surely work please replace * with . brace my post count is not enough to post outside link
As long as you can enter download mode... you are safe. If you can... just flash it back with Odin.
Follow this step
http://forum.xda-developers.com/showthread.php?t=1107331
Thanks but no
dhlalit11 said:
just try this www*mediafire*com/?br3r8fod5g3vud4 flash this firmware with Odin this will surely work please replace * with . brace my post count is not enough to post outside link
Click to expand...
Click to collapse
Thank you for the link, i tried but still have the same problem. Could this be an EEPROM problem?
ybregeon said:
Thank you for the link, i tried but still have the same problem. Could this be an EEPROM problem?
Click to expand...
Click to collapse
Try booting up without micro sd nor sim card.
Sent from my neighbour’s android phone
i had a same problem too.
my phone cannot power on, and ONLY download mode only working.
i flashed it for so many time too, and it doesn't seem to fix the problem.
so any fix on this ?
To ybregeon and Tre3,
I had the exact same issue, only Download Mode and RAM Dump, but could not enter recovery mode. Tried flashing many ROMs, oneclick unbrick, Heimdall recovery etc. but still no solutions available, I tried many-many tricks with no luck. So I went to Samsung Service Center, and it turned out that the problem is in the mainboard. It took me one night before Samsung replaced the mainboard from my phone and it's been working well since. All free of charge.
I hope your warranty is still valid. Good luck.
Sent from my GT-S5570 using XDA App
distan7 said:
To ybregeon and Tre3,
I had the exact same issue, only Download Mode and RAM Dump, but could not enter recovery mode. Tried flashing many ROMs, oneclick unbrick, Heimdall recovery etc. but still no solutions available, I tried many-many tricks with no luck. So I went to Samsung Service Center, and it turned out that the problem is in the mainboard. It took me one night before Samsung replaced the mainboard from my phone and it's been working well since. All free of charge.
I hope your warranty is still valid. Good luck.
Sent from my GT-S5570 using XDA App
Click to expand...
Click to collapse
reflash the XXKPI/XXKPK 2.3.4 then flash the cmw, xxkpi and xxkpk is the safest stock gb rom to install
Flash odin and go to recovery mode and wipe.
It should work.
Hey guys, I'm really in a bad spot here.
So I installed CM10 on a GT-i9000, worked fine except for the hardware buttons not working. So from there, I decided to install SlimBean (A foolish mistake that I thought was foolproof). And boom, now I am here, stuck in a CWM bootloop, and I've tried factory resetting and all, still boots the same.
I've tried installing other roms, sometimes it reboots during installation and doesn't complete, and even if it does complete, same problem, it boots into CWM. And I've noticed a new Samsung AnyCall Boot logo every since I tried SlimBean.
I've tried updating the kernel, no luck. I bought a download mode jig, but windows does not detect the Galaxy S in download mode with Kies installed. (I think I disabled USB Debugging in CM10)
Any suggestions? This is really stressing me out. I'm prepared to use odin, but download mode is not recognized on my PC.
slicer91 said:
Hey guys, I'm really in a bad spot here.
So I installed CM10 on a GT-i9000, worked fine except for the hardware buttons not working. So from there, I decided to install SlimBean (A foolish mistake that I thought was foolproof). And boom, now I am here, stuck in a CWM bootloop, and I've tried factory resetting and all, still boots the same.
I've tried installing other roms, sometimes it reboots during installation and doesn't complete, and even if it does complete, same problem, it boots into CWM. And I've noticed a new Samsung AnyCall Boot logo every since I tried SlimBean.
I've tried updating the kernel, no luck. I bought a download mode jig, but windows does not detect the Galaxy S in download mode with Kies installed. (I think I disabled USB Debugging in CM10)
Any suggestions? This is really stressing me out. I'm prepared to use odin, but download mode is not recognized on my PC.
Click to expand...
Click to collapse
You will hadware buttons failure when you flash a i9000 ROM on an Anycall M110S ( Korean Galaxy S) , so I am curious are you sure your phone is not an Anycall M110S? since you also getting Anycall boot screen...sounds odd, that i9000 will do that.
For USB connection problems , just try link on Quick Fixes and Solutions link below
slicer91 said:
Hey guys, I'm really in a bad spot here.
So I installed CM10 on a GT-i9000, worked fine except for the hardware buttons not working. So from there, I decided to install SlimBean (A foolish mistake that I thought was foolproof). And boom, now I am here, stuck in a CWM bootloop, and I've tried factory resetting and all, still boots the same.
I've tried installing other roms, sometimes it reboots during installation and doesn't complete, and even if it does complete, same problem, it boots into CWM. And I've noticed a new Samsung AnyCall Boot logo every since I tried SlimBean.
I've tried updating the kernel, no luck. I bought a download mode jig, but windows does not detect the Galaxy S in download mode with Kies installed. (I think I disabled USB Debugging in CM10)
Any suggestions? This is really stressing me out. I'm prepared to use odin, but download mode is not recognized on my PC.
Click to expand...
Click to collapse
Go back your original firmware...
Any updates to this?
I am having a similar situation. I tried flashing ICS ROM to my Anycall Samsung Galaxy S GT-I9000. It is now stuck in recovery mode. I tried doing factory reset and wiping the cache and dalvik cache and tried reflashing. Everything goes fine but gets stuck in the recovery mode - more correctly in download mode but the download mode logo flashes twices and enters to recovery mode.
Any possible solutions to get me out of this mess?
Thanks,
Sid
your problem will be solved with this post:
http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330
Edit : above url is for S+ your device is S , sorry .
Thanks, but anything similar for Galaxy S? And remember my download mode does not stay, if flashes twice and runs into recovery mode. So if your solution is something to do in recovery mode it will be helpful (or if your solution is to first make me stay on download mode and then flash something using odin I will be thankful)
Regards,
Sid
sidswami said:
I tried flashing ICS ROM to my Anycall Samsung Galaxy S GT-I9000.
Click to expand...
Click to collapse
Check your Model, Anycal does not make GT I9000, it makes only M110S and firmwares / solutions for them vary.
If you have Anycal M110S visit PIT STOP link below to solve your problems
Check Here to chose your forum/Guide by Version of your phone or you will have more problems by using wrong solutions due to different versions of Galaxy S
you can get a rescue kit from My Android Collections and or a solution from My Android Solutions
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card....Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.
worked for me
Hi..also had the boot loop...
fixed that easily by removing the accu..
removing external SD !!
Thats it !
Worked for me !
Later on I inserted the SD again..and everythings fine
beben3 said:
Hi..also had the boot loop...
fixed that easily by removing the accu..
removing external SD !!
Thats it !
Worked for me !
Later on I inserted the SD again..and everythings fine
Click to expand...
Click to collapse
Glad that worked for you, but I for some reason can't be so lucky. I tried to also flash CWM 10 but after the home key not working I decided to flash Slim Bean and now I am stuck. My phone isn't even recognized by Odin any more and I have tried different USB ports and even my laptop with Heimdall. I don't know what to do at this point, but any kind of suggestions would be great. Usually when I get stuck I just flash back to Stock and start all over with a new ROM or kernel but I have no idea where to go from this point.
Hi everybody, I have a problem. _.
I flashed on my s3mini cwm touch.
I wanted to start my phone but the screen is black, it does not indicate charging, my PC recognizes the phone is not the same as Odin.
In the recovery mode I can not, and the download does not mode.
So what can I do? :crying:
Sorry for my bad english , i´m from Germany
Lorick said:
Hi everybody, I have a problem. _.
I flashed on my s3mini cwm touch.
I wanted to start my phone but the screen is black, it does not indicate charging, my PC recognizes the phone is not the same as Odin.
In the recovery mode I can not, and the download does not mode.
So what can I do? :crying:
Sorry for my bad english , i´m from Germany
Click to expand...
Click to collapse
Put un download mode and reflash
ftheriau01 said:
Put un download mode and reflash
Click to expand...
Click to collapse
The 3 button combo does not work because the phone does not start.
That's why I can not get into the download mode
Jit
Search s 3 mini adb recovery.
Sent from my GT-I8190 using xda app-developers app
Which method did you use to flash it?
Is your battery loaded?
First you need to check if your battery is charged. If you have a friend with s3 mini try to charge your battery in his phone.
If the battery is charged, the phone should boot. The recovery doesn't affect the boot partition. If the phone doesn't boot you probably wrote something not ok in the boot partition. In this case only a JTAG can fix your phone.
When you flash the recovery from Odin the file you want to flash should be in the PDA box. If you put the recovery in the bootloader box, the recovery file will overwrite the bootloader and your phone won't boot any more. Odin doesn't test if the file is ok for that partition. This is called a hardbrick.
If you didn't touch the bootloader partition, the phone should boot and you should be able to get it into download mode at least. I don't think there is anything you can put in the PDA box to make your phone not boot.
Try flash the stock rom again, use odin it should work even if you're phone is off, remember you had to previously installed samsung kies on your pc/laptop so you're computer recognized your phone (that's simply basic)... I've seen the tys0n dude knows a lot too he's helped other guys good luck pal.
Hello everyone I am sure that there is a lot of this thread going.
But I think mine is even worse.
the problem:
I rooted the device, everything worked fine ( did it with card reader - because my pc can not recognize the device had the problem a long time ago, somehow it worked then, but does not now, giving me the code 10 and 43
I think my USB port on the SAMSUNG might be damaged, because it does recharge but wont connect at all, tried kies, tried all the debugging modes, drivers, turning off the computer, rebooting all that stuff..)
The main problem is I flashed the cwm, rebooted, worked fine, then I clicked the do Backup thing and from then I can only go to yellow "downloading" or samsung logo, cannot even use that "Odin" because my USB is apparently damaged.. Any Ideas at all other than taking the phone and throwing it into the dumpster?
it is gt-s5830
my system is Win7-64bit
any help will be deeply appreciated ...
sincerely Fariel2012
Samsung logo freeze, cant recovery, can download mode (cant join to pc)
try with different usb cable
daniga74
Fariel2012 said:
Hello everyone I am sure that there is a lot of this thread going.
But I think mine is even worse.
the problem:
I rooted the device, everything worked fine ( did it with card reader - because my pc can not recognize the device had the problem a long time ago, somehow it worked then, but does not now, giving me the code 10 and 43
I think my USB port on the SAMSUNG might be damaged, because it does recharge but wont connect at all, tried kies, tried all the debugging modes, drivers, turning off the computer, rebooting all that stuff..)
The main problem is I flashed the cwm, rebooted, worked fine, then I clicked the do Backup thing and from then I can only go to yellow "downloading" or samsung logo, cannot even use that "Odin" because my USB is apparently damaged.. Any Ideas at all other than taking the phone and throwing it into the dumpster?
it is gt-s5830
my system is Win7-64bit
any help will be deeply appreciated ...
sincerely Fariel2012
Click to expand...
Click to collapse
Hi there
you will need to give a usb jigg service to your device and then flsah it back to stock using odin
SGA s5830 stuck @ boot logo
I follwed these steps before it stuck @ boot logo
1 rooted phone through root_S5830.zip file
2 then used 6.0.4.6-cooper_fix.zip cwm recovery
3 decided to flash Touchwiz-Resurrected_ROM_V1.0.zip rom
4 followed all steps to flash thrrough CWM recovery
phone reebots samsung.com logo>> samsung boot animation shows up>>samsung name appears again keeps glowing and phone restarts!!!
after it I tried 6-7 different roms then i tried to flash through odin but wasnt able to do so but failed the device showed up in odin but wasnt able to flash stock rom
then i decided to go for Phil touch recovery I installed Philtouch recovery and tried to flash a custom rom now I'm stuck again at boot name GALAXY ACE s5830 nothing goes further!!!
I searched over XDA and some guy quoted this problem is solvable by using odin and putting phone in downloading mode (vol- button+home button + Power on ) I am able to put my phone in downloading mode, but when i conncet it to PC it says USB device not recognized WTF!!!!!???? 10 mins ago i connected my Phone using same cable same port same odin now this ***** appears ???
I swapped PC's, Cables, ports everything nothings working , phone wont start stuck @ boot logo pls help ASAP :crying:
That's it.. You have hard bricked your phone that's dead recovery and dead download mode. Give your phone the usb jigg service which will force it to go to either the download mode or the recovery mode whatever you want.
I Recently received a galaxy s3 lte gt-i9305 from ana other country so no warranty for me
So I wanted to install cm 13 so installed twrp recovery thru odin and it showed PASS in green but when i tried to boot into it there is nothing it just reboots it self back to normal
Then i tried cwm too the same thing
After that I saw a yellow triangle with phone connected to pca and said please connect kies or whatever something like this
So i looked this up then i found that i need to flash stock firmware
And that's what I tried to do
And that never wnts to work always fails in odin
Either at zl.img or cache.img
I tried kies but won't recognize it
Tried octoplus... Loaded and so fast but installed only recovery and boot that's what was in the log
Now can't go to recovery nor boot
When i try that i get the Samsung logo for like... A sexond thn turns off
The only thing that i can do is download mode
Please any one help me pleaase
I didn't even enjoy having the phone it's brand new :crying:
http://www.htcmania.com/showthread.php?t=698436
I don't get it
so do i need to install linux on a usb flash and use it or what ?
please reply asap