Hi All,
I have just within the last few days received a brand new Nexus 6, did all updates and it is running 5.1.1. I have found multiple guides online in regards to rooting 5.0, but none of them have any reference to 5.1.1 (I assume because it is still fairly new). I would just like to make sure that the guides for 5.0 are still appropriate for 5.1.1 before I go ahead with the root, and will not brick my phone. (Would post link for the guide I was going to follow, but I have less than 10 posts)
If anyone could verify this for me, that would be awesome! As well, if anyone has any newer guide or anything else that I should know as I am starting from scratch with a new device, that would be great as well!
Thanks!
SnakeByte77 said:
Hi All,
I have just within the last few days received a brand new Nexus 6, did all updates and it is running 5.1.1. I have found multiple guides online in regards to rooting 5.0, but none of them have any reference to 5.1.1 (I assume because it is still fairly new). I would just like to make sure that the guides for 5.0 are still appropriate for 5.1.1 before I go ahead with the root, and will not brick my phone. (Would post link for the guide I was going to follow, but I have less than 10 posts)
If anyone could verify this for me, that would be awesome! As well, if anyone has any newer guide or anything else that I should know as I am starting from scratch with a new device, that would be great as well!
Thanks!
Click to expand...
Click to collapse
its all the same, for any nexus. 1. unlock the bootloader via fastboot. 2. flash twrp recovery via fastboot. 3. flash the latest supersu in your new recovery. 4. reboot, with your bootloader unlocked and with root.
Yes, the method to unlock bootloader, flash custom recovery, and root has not changed. I'd suggest this > http://forum.xda-developers.com/nexus-6/general/how-to-nexus-6-one-beginners-guide-t2948481
Thanks! Just wanted to make sure!
Hi all
I've just bought a Fire Tablet on Amazon day with the intention of rooting it and installing CM, but I am a newbie and there's so much information on here it's kind of overwhelming, and most of it has a lot of "if this, then that, or if you want to use that, do this" type guides, which for someones who doesn't really know what all the different methods and options are is really confusing!
So can someone please tell me the step by step process for doing it?
From what I've read I think I have to downgrade to 5.1.2 of the OS as I can't root on 5.1.4? Is that correct?
So do I have to root before I do that? Or do I downgrade first and then root, and then install the CM?
If someone can list each of the steps I need to take to get it from a fresh new 5th Gen Fire 7 to having all the Amazon rubbish off and having it running CM, then I can look for the guides for each step!
Thanks, I hope that makes sense!
:angel:
PS: I've already bricked one by trying to downgrade to 5.1.1 because that wasn't apparent until it was too late, replacement on its way!
Yeah, I read the same thing and I bought it on Prime day. When's the 5.14 tool going to come out? I know, beggars... I really think it's silly to have to downgrade and risk bricking it when normal root for those OS versions don't have such a concern.
Bob Boblaw said:
Hi all
I've just bought a Fire Tablet on Amazon day with the intention of rooting it and installing CM, but I am a newbie and there's so much information on here it's kind of overwhelming, and most of it has a lot of "if this, then that, or if you want to use that, do this" type guides, which for someones who doesn't really know what all the different methods and options are is really confusing!
So can someone please tell me the step by step process for doing it?
From what I've read I think I have to downgrade to 5.1.2 of the OS as I can't root on 5.1.4? Is that correct?
So do I have to root before I do that? Or do I downgrade first and then root, and then install the CM?
If someone can list each of the steps I need to take to get it from a fresh new 5th Gen Fire 7 to having all the Amazon rubbish off and having it running CM, then I can look for the guides for each step!
Thanks, I hope that makes sense!
:angel:
PS: I've already bricked one by trying to downgrade to 5.1.1 because that wasn't apparent until it was too late, replacement on its way!
Click to expand...
Click to collapse
I did the same thing, bought the tablet on prime day and was successfully able to root it and put the AOSP nexus rom
First things first make sure you have the 7-inch tablet for the following steps because apparently it only works with that specific model. Since this is my first post I can't post any links so sorry about that however, I have added the video title so that you can just google it and find the video.
Anything above fire os 5.1.2 ( that is 5.1.4, 5.1.3, 5.1.2.1) has to be downgraded to 5.1.2.
Also downgrading from 5.1.4 to 5.1.1 is going to give you a hard brick. I don't know how you didn't know that but it was clearly stated in the xda guide I was following
Basically you have to follow rootjunkys video and instead of using the file he uses in the video use the fire OS 5.1.2 file which is also available on his website.
Imortant: Do a factory reset before downgrading. I did not do that and the rooting process did not work.
Video title: How to Firmware Restore or Unbrick your Amazon Fire 5th gen Tablet
After you have fire OS 5.1.2 follow the rooting process shown in another rootjunky video
Video title: How to root the Amazon Fire 5th gen 7in on Fire OS 5 1 2 SuperTool Mac linux and Windows
Note: He shows how to do the whole process while using mac but it can be done on windows awell and the windows files are already present. Instead of using the .sh file and opening the terminal double click the .bat file and follow along.
You can use his SuperTool to put the play store app and fire flash app.
Note: For some reason fire flash was not working properly for me by using the SuperTool, so I just installed it from the google play store.
Now you should have rooted fire OS 5.1.2 along with superSU. Now with the fire flash app and you can download any rom that you want to flash. Follow the steps in the video for instructions
Video title: Amazon Fire 5th gen AOSP Nexus rom install with Flash Fire app
Hope this helps.
All credit to rootjunky
erikthebikeman said:
Yeah, I read the same thing and I bought it on Prime day. When's the 5.14 tool going to come out? I know, beggars... I really think it's silly to have to downgrade and risk bricking it when normal root for those OS versions don't have such a concern.
Click to expand...
Click to collapse
It's not a matter of someone getting off their keister and whipping up a "tool" (presumably you are talking about root) that works with FireOS 5.1.4 or whatever the latest version is. Like many manufactures Amazon actively discourages rooting devices and attempt to block known exploits. It's a cat and mouse game. We may see a "tool" soon, much further down the road or never. Be happy you can root the device at all and be thankful for the individuals who unselfishly share their time and talents with the community.
Thanks nefarian.
The problem was that the guide I was referred to for getting CM onto it already assumed it had been rooted, and when I started googling and looking on the different guides on rootjunky there were so many coming from different angles but nothing giving the clear start to end steps for what I wanted to do, for a newbie it was very confusing. Plus in the guide I was following (a rootjunky one) he had an older version of the OS and the toolkit had different files/folders to what are in it now, so I guess at that time there was no mentioned of 5.1.4 and not being able to go back.
After thinking I needed to downgrade the OS I found the one for unbrinking and downgrading and did that fine to 5.1.2, but then when I tried the superkit it still said it was too new, so I tried to downgrade further, which is when I bricked it.
There was no mention of it on the video..... other than a bloody great overlay in the corner, which must have been added later on, and probably because I was tearing my hair out and getting confused I didn't spot it. That's my excuse anyway!
Thanks for your help, I'll have a go with the new one on Monday. So instead of trying to find an all in one guide, I need to find guide for the steps in this order;
1 - do a factory reset on the device (from the device settings, or do I need to do it in the bootloader settings?)
2 -downgrade to 5.1.2 (I should be able to do this now)
3 - root the device (and install supersu?)
4 - install CM
Then it should have full CM and none of the Amazon OS left.
I'm not missing any steps there am I?
Thanks again!
Bob Boblaw said:
Thanks nefarian.
The problem was that the guide I was referred to for getting CM onto it already assumed it had been rooted, and when I started googling and looking on the different guides on rootjunky there were so many coming from different angles but nothing giving the clear start to end steps for what I wanted to do, for a newbie it was very confusing. Plus in the guide I was following (a rootjunky one) he had an older version of the OS and the toolkit had different files/folders to what are in it now, so I guess at that time there was no mentioned of 5.1.4 and not being able to go back.
After thinking I needed to downgrade the OS I found the one for unbrinking and downgrading and did that fine to 5.1.2, but then when I tried the superkit it still said it was too new, so I tried to downgrade further, which is when I bricked it.
There was no mention of it on the video..... other than a bloody great overlay in the corner, which must have been added later on, and probably because I was tearing my hair out and getting confused I didn't spot it. That's my excuse anyway!
Thanks for your help, I'll have a go with the new one on Monday. So instead of trying to find an all in one guide, I need to find guide for the steps in this order;
1 - do a factory reset on the device (from the device settings, or do I need to do it in the bootloader settings?)
2 -downgrade to 5.1.2 (I should be able to do this now)
3 - root the device (and install supersu?)
4 - install CM
Then it should have full CM and none of the Amazon OS left.
I'm not missing any steps there am I?
Thanks again!
Click to expand...
Click to collapse
- no need for a factory reset at any point; offers no benefit for what you are trying to accomplish.
- installation of SuperSU (replacing Kinguser and related Kingroot cruft) after rooting is highly recommended prior to using FlashFire or any other tool that messes with the system partition. The SuperTool can facilitate this otherwise ugly task.
- if you are struggling with RootJunky videos you should give serious consideration to the challenges of installing a custom rom. It doesn't get any easier going forward.
Thanks. I managed to root my Nvidia Shield TV fine so I should be able to do it, I just needed to be clear of the full process from start to finish, and as I wasn't starting from the beginning of the process that made it more confusing. The rootjunky videos are great, but when someone is saying you can use this or that or do this or that it's putting choices and variables in to the mix so it's not a straighforward step by step, and when the kits and the webpages shown on the videos have changed since they were made, for someone trying to piece the info together it takes a bit more time.
Maybe I should point out that I didn't look on here initially when I started trying to do it, I basically saw the fire on offer mentioned on a forum I use and someone said yeah, it's easy to root and get CM on if, just user this video, with the link to a rootjunky YouTube video which didn't mention the prerequisite of already having downgraded the OS (why would it) so in hindsight I didn't start at the right place or have the best information.
After reading through some stuff on here (and that's over whelming for a first timer as there is so much stuff on here for many, many devices and platforms - even just finding the Amazon fire sub forum on an iPad wasn't easy!) I'm getting a better idea for attempt two.
I'll get there, and at least I know how to not brick it now! :good:
OK, so making progress. I have downgraded the new one fine, it now has 5.1.2 of the Fire OS.
I've used rootjunkys supertool to root the device with Kingmaker, which then installed SuperSU, and I finally uninstalled Kingmaker/Purity.
So I now have a rooted Fire, which is great. I have also installed the Google Play store, disabled OTA updates and removed ads from the lock screen. But I don't want the Amazon OS on it (pretty fugly isn't it!), so the next step, flashing it with CM.
What guide would be best for a Fire with 5.1.2 on it? When I look at the Rootjunkys guide for installing CM on the Fire (https://www.youtube.com/watch?v=4dwguHoxTvo&feature=youtu.be) the super tool kit does differ, and the one I downloaded from his link only has the tool for doing it for OS 5.0.1, so it won't let me boot into TWRP recovery. What would be the best tools/guide/method to use for installing CM onto a Fire with 5.1.2?
Thanks
Bob Boblaw said:
OK, so making progress. I have downgraded the new one fine, it now has 5.1.2 of the Fire OS.
I've used rootjunkys supertool to root the device with Kingmaker, which then installed SuperSU, and I finally uninstalled Kingmaker/Purity.
So I now have a rooted Fire, which is great. I have also installed the Google Play store, disabled OTA updates and removed ads from the lock screen. But I don't want the Amazon OS on it (pretty fugly isn't it!), so the next step, flashing it with CM.
What guide would be best for a Fire with 5.1.2 on it? When I look at the Rootjunkys guide for installing CM on the Fire (
&feature=youtu.be) the super tool kit does differ, and the one I downloaded from his link only has the tool for doing it for OS 5.0.1, so it won't let me boot into TWRP recovery. What would be the best tools/guide/method to use for installing CM onto a Fire with 5.1.2?
Thanks
Click to expand...
Click to collapse
- Kingroot/Purify, not Kingmaker/Purity
- I can't think of a better suite of guides than the videos produced by RootJunky
- use FlashFire 0.51 to install (flash) the rom of your choice
- OP for Nexus rom has video link and and basic FlashFire guidance
- get over the minor variations in the language/tools used to support this device between the making of videos and the latest release.
Bob Boblaw said:
OK, so making progress. I have downgraded the new one fine, it now has 5.1.2 of the Fire OS.
I've used rootjunkys supertool to root the device with Kingmaker, which then installed SuperSU, and I finally uninstalled Kingmaker/Purity.
So I now have a rooted Fire, which is great. I have also installed the Google Play store, disabled OTA updates and removed ads from the lock screen. But I don't want the Amazon OS on it (pretty fugly isn't it!), so the next step, flashing it with CM.
What guide would be best for a Fire with 5.1.2 on it? When I look at the Rootjunkys guide for installing CM on the Fire (https://www.youtube.com/watch?v=4dwguHoxTvo&feature=youtu.be) the super tool kit does differ, and the one I downloaded from his link only has the tool for doing it for OS 5.0.1, so it won't let me boot into TWRP recovery. What would be the best tools/guide/method to use for installing CM onto a Fire with 5.1.2?
Thanks
Click to expand...
Click to collapse
1. Get the CM rom and put it in the tablet from here: http://forum.xda-developers.com/amazon-fire/orig-development/rom-cm-12-1-2015-11-15-t3249416
2. Install FlashFire 0.51 from play store or use the SuperTool
3. Follow the video instructions and instead of the nexus rom use the CM rom you downloaded:
Thanks guys. All going well. CM12 is now installed using that Nexus guide. However, because he used Nexus the Play store was installed by default, which CM12 doesn't have.
Looking here - https://wiki.cyanogenmod.org/w/Google_Apps#Installation - I need to download Google Apps and install it, but which package for the Fire 7 5th gen? There are a number of variants to choose from. Looks like using twrp it would have been a pico one, but as it's a new OS a different one is needed?
So it's ARM device, Android 5.1 and Nano variant?
That gives me a zip file, but I can't work out how to install it. The videos I've found all have it as being installed as part of the OS installation via twrp. Should I have installed gapps when I installed the CM12.1 OS, or can I still install it later?
When I go into the boot menu the only install option is to apply update from ADB, wipe data/factory reset, wipe cache partition, reboot to bootloader or power down/reboot.
I tried to use apply update from ADB and did "adb sideload gapps-filename.zip" but it failed to complete the install and went back to the boot menu.
What do I need to do to get Play Store on there?
Thanks again
Bob Boblaw said:
Thanks guys. All going well. CM12 is now installed using that Nexus guide. However, because he used Nexus the Play store was installed by default, which CM12 doesn't have.
Looking here - https://wiki.cyanogenmod.org/w/Google_Apps#Installation - I need to download Google Apps and install it, but which package for the Fire 7 5th gen? There are a number of variants to choose from. Looks like using twrp it would have been a pico one, but as it's a new OS a different one is needed?
So it's ARM device, Android 5.1 and Nano variant?
That gives me a zip file, but I can't work out how to install it. The videos I've found all have it as being installed as part of the OS installation via twrp. Should I have installed gapps when I installed the CM12.1 OS, or can I still install it later?
When I go into the boot menu the only install option is to apply update from ADB, wipe data/factory reset, wipe cache partition, reboot to bootloader or power down/reboot.
I tried to use apply update from ADB and did "adb sideload gapps-filename.zip" but it failed to complete the install and went back to the boot menu.
What do I need to do to get Play Store on there?
Thanks again
Click to expand...
Click to collapse
Reinstall FlashFire 0.51 (here) on CM 12.1 then use it to flash the GAapps package. Agree with your selection: ARM/5.1/nano.
Ah, great, thank you, yep, that's got it on there.
Excellent! All modded and running very quickly! Thanks for the help guys, I appreciate the patience.
Not much space on these Fire's is there, it's already telling me it's low on space and I've only installed MediaMonkey!
Two more quick questions and I'll leave you alone....!
Is it possible to have the SD card to be used as combined storage? For example, my Shield TV lets me 'add' the SD card to the main storage so it sees it all as one instead of a second removable device, so can install apps on it, etc. If this possible with Cyanogenmod? (Not sure what you'd call that feature to search for it!) Thankfully the main reason I bought it was to help manage my music with MediaMonkey so I won't be installing lots on it, but if it is possible it would be useful.
Second, with regard to OS updates on CM, are they automated or do they need to be done manually (and, if so, with care?)
Thanks again!
Bob Boblaw said:
Two more quick questions and I'll leave you alone....!
Is it possible to have the SD card to be used as combined storage?
Second, with regard to OS updates on CM, are they automated or do they need to be done manually ...
Click to expand...
Click to collapse
Short answer: 'yes'. There are various approaches to utilizing SD cards for app installation/storage each with pros, cons and compromises. I highly recommend using a tool that leverages 'symbolic links' which is by far the most reliable method. An example is Link2SD which you can find in the Play Store.
All custom roms for this device are updated manually via FlaahFire or TWRP (if available). Instructions can usually be found in the OP.
@Bob Boblaw
did you open up the file manager and install the flashfire.apk? I am on the same problem you had on your post #11, but my problem I ran into now is flash fire says "root access could not be acquired" otherwise this would be a easy to do.
I think I might have to reinstall everything and start over. >_<
Yes, I copied it over via USB and installed it from the file manager. Do you have root enabled in the developer settings, I enabled it for adb and apps.
Bob Boblaw said:
Yes, I copied it over via USB and installed it from the file manager. Do you have root enabled in the developer settings, I enabled it for adb and apps.
Click to expand...
Click to collapse
Yes! Thank you, that is what I had missed plus I didn't reboot my device so took like 15mins trying to figure out why it wasn't still working.
Glad you got it working ! :good:
Great post guys!! I am getting ready to root my fire OS 5.1.4 and this helps me greatly! Been searching for a downgrade guide and this is it! Have one question is Cm only recovery program or is there a TWRP version for this ? I would think that lastest TWRP would work since its all android but have to ask .I like TWRP myself cause i have it on rooted tablets
thunderman98 said:
Great post guys!! I am getting ready to root my fire OS 5.1.4 and this helps me greatly! Been searching for a downgrade guide and this is it! Have one question is Cm only recovery program or is there a TWRP version for this ? I would think that lastest TWRP would work since its all android but have to ask .I like TWRP myself cause i have it on rooted tablets
Click to expand...
Click to collapse
You can not boot/install/use twrp on this device unless running FireOS 5.0.1 or lower. Nor can you rollback to any version below 5.1.2 without bricking the device. FlashFire is the tool of choice for installing roms and performing other maintenance tasks that are typically done in a custom recovery environment.
Hey so do you think the blu advance 5.0 hd will be compatible with the work being done on the R1 hd? I would really like to jump on this hype train with my similar but slightly less powerful phone.
I am hoping that I will be able to install a custom rom like R1 users. I also want to root my phone to disable google services in the meantime.
xda123455 said:
Hey so do you think the blu advance 5.0 hd will be compatible with the work being done on the R1 hd? I would really like to jump on this hype train with my similar but slightly less powerful phone.
I am hoping that I will be able to install a custom rom like R1 users. I also want to root my phone to disable google services in the meantime.
Click to expand...
Click to collapse
That phone is based on the 6580 SoC, the R1 uses a 6735. There is a site that lists some roms for blu products that may help, I don't know how reliable they are, I have never used them, but if you want to check it out...
http://www.blu-dev.com
kal250 said:
That phone is based on the 6580 SoC, the R1 uses a 6735. There is a site that lists some roms for blu products that may help, I don't know how reliable they are, I have never used them, but if you want to check it out...
http://www.blu-dev.com
Click to expand...
Click to collapse
Thanks I checked out the site and it seems like there is no blue advance 5.0 roms and no forum activity =/
xda123455 said:
Thanks I checked out the site and it seems like there is no blue advance 5.0 roms and no forum activity =/
Click to expand...
Click to collapse
If your wanting to root it, I'm hearing Kingroot is working, never used it though, so I can't say if it works or if it's safe??
kal250 said:
If your wanting to root it, I'm hearing Kingroot is working, never used it though, so I can't say if it works or if it's safe??
Click to expand...
Click to collapse
I've tried Kingroot, Kingo Root and Frama root. All with no luck.
devanttrio said:
I've tried Kingroot, Kingo Root and Frama root. All with no luck.
Click to expand...
Click to collapse
Did you use the desktop versions? Those have higher success rates. I tried rooting an HTC that way and it worked flawlessly even when the apk didn't.
Autolounge said:
Did you use the desktop versions? Those have higher success rates. I tried rooting an HTC that way and it worked flawlessly even when the apk didn't.
Click to expand...
Click to collapse
I did.
I also tried the apps, of the ones that have apps.
devanttrio said:
I did.
I also tried the apps, of the ones that have apps.
Click to expand...
Click to collapse
You're going to have to do it manually.
no go on kingo
I'm in the same boat. I've got 20 of these BLU Advance 5.0 HD devices and I need to root them to gain access to the VirtualSensor app to emulate a gyroscope. I've tried Kingo and Mobogenie (barf-boo-hisssss). I'm wondering if kingo isn't working on these since they have Marshmallow. I read somewhere they originally shipped with Lollipop.
Did you get anywhere Devanttrio??
trc117 said:
I'm in the same boat. I've got 20 of these BLU Advance 5.0 HD devices and I need to root them to gain access to the VirtualSensor app to emulate a gyroscope. I've tried Kingo and Mobogenie (barf-boo-hisssss). I'm wondering if kingo isn't working on these since they have Marshmallow. I read somewhere they originally shipped with Lollipop.
Did you get anywhere Devanttrio??
Click to expand...
Click to collapse
consider yourself blessed my friend, i'd like to root mine just to get marshmallow.... i have lollipop and checked for updates and says i'm up to date, i can only install 1 app at a time because there is no room on the internal storage, i have to move every app to sd card and then clean cache for each and every app i want.. never recommending blu to anyone
trc117 said:
I'm in the same boat. I've got 20 of these BLU Advance 5.0 HD devices and I need to root them to gain access to the VirtualSensor app to emulate a gyroscope. I've tried Kingo and Mobogenie (barf-boo-hisssss). I'm wondering if kingo isn't working on these since they have Marshmallow. I read somewhere they originally shipped with Lollipop.
Did you get anywhere Devanttrio??
Click to expand...
Click to collapse
I was able to root mine successfully the long way.... had to obtain a dump of the boot.img / recovery.img using software that I'm not sure of the policy of discussion on here at XDA - compile TWRP - unlock bootloader - fastboot boot the compiled recovery - flash SuperSU to get patched boot.img (kitchen was being dumb and systemless root didn't want to work) - Flash SuperSU in system mode - Convert SuperSU.apk to system app so it doesn't get removed every reboot. I can post my compiled TWRP when I'm back at my office or grab it from my repository that I'm trying to establish - https://bluroms.info . Sorry for the design mess / lack of much there at moment haven't had much free time lately in process of cleaning up the device kernel sources to build from source... its sort of ... messy in there...... can post on github if anyone wants in
zjr8 said:
I was able to root mine successfully the long way.... had to obtain a dump of the boot.img / recovery.img using software that I'm not sure of the policy of discussion on here at XDA - compile TWRP - unlock bootloader - fastboot boot the compiled recovery - flash SuperSU to get patched boot.img (kitchen was being dumb and systemless root didn't want to work) - Flash SuperSU in system mode - Convert SuperSU.apk to system app so it doesn't get removed every reboot. I can post my compiled TWRP when I'm back at my office or grab it from my repository that I'm trying to establish - https://bluroms.info . Sorry for the design mess / lack of much there at moment haven't had much free time lately in process of cleaning up the device kernel sources to build from source... its sort of ... messy in there...... can post on github if anyone wants in
Click to expand...
Click to collapse
I've been trying to root a Blu Advance 5.0 HD for a while now and stumbled on this post. I visited your site but am not sure what a 'Scatter File' is, or in what order I need to do things in order to get root.
If you could provide a little more detailed info that would be very much appreciated.
Thanks!
rAy
EDIT: Sorry, to clarify I tried all of the other PC and APK rooting solutions but was able to unlock the bootloader using ADB. I guess I'm just looking for the proper way to root and add TWRP. Thanks!
ray2jerry said:
I've been trying to root a Blu Advance 5.0 HD for a while now and stumbled on this post. I visited your site but am not sure what a 'Scatter File' is, or in what order I need to do things in order to get root.
If you could provide a little more detailed info that would be very much appreciated.
Thanks!
rAy
EDIT: Sorry, to clarify I tried all of the other PC and APK rooting solutions but was able to unlock the bootloader using ADB. I guess I'm just looking for the proper way to root and add TWRP. Thanks!
Click to expand...
Click to collapse
I found a option in developer settings that is "Enable OEM unlocking" and it makes it so you can unlock the bootloader from fastboot, if you do adb reboot-bootloader and then fastboot unlock it should undo the bootloader for you
zjr8 said:
I was able to root mine successfully the long way.... had to obtain a dump of the boot.img / recovery.img using software that I'm not sure of the policy of discussion on here at XDA - compile TWRP - unlock bootloader - fastboot boot the compiled recovery - flash SuperSU to get patched boot.img (kitchen was being dumb and systemless root didn't want to work) - Flash SuperSU in system mode - Convert SuperSU.apk to system app so it doesn't get removed every reboot. I can post my compiled TWRP when I'm back at my office or grab it from my repository that I'm trying to establish - Sorry for the design mess / lack of much there at moment haven't had much free time lately in process of cleaning up the device kernel sources to build from source... its sort of ... messy in there...... can post on github if anyone wants in
Click to expand...
Click to collapse
Like the others said, I would really appreciate if you could give an explanation or tutorial on how to use these files that you uploaded to root the phone. I'm willing to donate some money if required. I only know basic technical stuff haha.
CreativiTimothy said:
Like the others said, I would really appreciate if you could give an explanation or tutorial on how to use these files that you uploaded to root the phone. I'm willing to donate some money if required. I only know basic technical stuff haha.
Click to expand...
Click to collapse
I too am trying to root this device, and am unclear on a few of the steps here. I actually found your site with the recovery and boot images independently, really appreciated! I am at the point where I just need to patch the boot image, though I am not sure how to do this. If you could help me out with this step I might be able to put together some sort of list of steps to get through the whole process if you don't have the time.
Any help would be appreciated, thanks!
Hello
I've been following this guide for rooting/bootloading and removing the amazon ads from the BLU R1. I am a bit new to this but have done it before, a while back.
I just need some guidance on the steps.
I found this page with two methods: http://forum.xda-developers.com/r1-hd/development/r1-hd-amazon-bootloader-unlock-method-t3426104
It says to do the bootloader first (first youtube video) then the flashing and TWRP second....or is this in reverse, to use TWRP to backup, flash and then bootloader?
And then I find this apparently newer version of removing partial ads which allows for background updates to occur: http://forum.xda-developers.com/r1-hd/how-to/guide-ad-removal-debloat-block-ota-easy-t3429555
which also has a bootloader instruction at the end.
Can someone just give me some guidance in steps on what to start with and then whats next, and whats last. is it flash and twrp backup, then bootloader, then the instructions for the partial debloater. I can do the steps listed on each page just need to know which to do in order.
Thanks!!
ebaydan777 said:
Hello
I've been following this guide for rooting/bootloading and removing the amazon ads from the BLU R1. I am a bit new to this but have done it before, a while back.
I just need some guidance on the steps.
I found this page with two methods: http://forum.xda-developers.com/r1-hd/development/r1-hd-amazon-bootloader-unlock-method-t3426104
It says to do the bootloader first (first youtube video) then the flashing and TWRP second....or is this in reverse, to use TWRP to backup, flash and then bootloader?
And then I find this apparently newer version of removing partial ads which allows for background updates to occur: http://forum.xda-developers.com/r1-hd/how-to/guide-ad-removal-debloat-block-ota-easy-t3429555
which also has a bootloader instruction at the end.
Can someone just give me some guidance in steps on what to start with and then whats next, and whats last. is it flash and twrp backup, then bootloader, then the instructions for the partial debloater. I can do the steps listed on each page just need to know which to do in order.
Thanks!!
Click to expand...
Click to collapse
The easiest method I have found is here, it involves converting your R1 from prime to non prime and then directions for unlocking bootloader then twrp and root.
http://forum.xda-developers.com/r1-hd/how-to/guide-convert-to-prime-rollback-ota-t3432499
The only downside to this, is there have been no updates yet for non prime(though there are reports of one being released, I have not yet received one) so currently it only has the June 2016 security patches.
If you prefer to follow rootjunkys method he has a firmware on his site that flashes OTA 6.5 with Ads already removed, but OTA disabled after you flash his rom you then unlock bootloader, then flash twrp and root his guide is located here
http://forum.xda-developers.com/r1-hd/development/blu-r1-hd-remove-amazon-ads-ota-updates-t3427303
I suggest you read both and determine the best route for you.
kal250 said:
The easiest method I have found is here, it involves converting your R1 from prime to non prime and then directions for unlocking bootloader then twrp and root.
http://forum.xda-developers.com/r1-hd/how-to/guide-convert-to-prime-rollback-ota-t3432499
The only downside to this, is there have been no updates yet for non prime(though there are reports of one being released, I have not yet received one) so currently it only has the June 2016 security patches.
If you prefer to follow rootjunkys method he has a firmware on his site that flashes OTA 6.5 with Ads already removed, but OTA disabled after you flash his rom you then unlock bootloader, then flash twrp and root his guide is located here
http://forum.xda-developers.com/r1-hd/development/blu-r1-hd-remove-amazon-ads-ota-updates-t3427303
I suggest you read both and determine the best route for you.
Click to expand...
Click to collapse
Thank you for the response I really appreciate it!
What's the downside of the OTA being disabled btw? I noticed on my link there's a partial and full debloat file. Was going to use the partial since it allows background updating
kal250 said:
The easiest method I have found is here, it involves converting your R1 from prime to non prime and then directions for unlocking bootloader then twrp and root.
http://forum.xda-developers.com/r1-hd/how-to/guide-convert-to-prime-rollback-ota-t3432499
The only downside to this, is there have been no updates yet for non prime(though there are reports of one being released, I have not yet received one) so currently it only has the June 2016 security patches.
If you prefer to follow rootjunkys method he has a firmware on his site that flashes OTA 6.5 with Ads already removed, but OTA disabled after you flash his rom you then unlock bootloader, then flash twrp and root his guide is located here
http://forum.xda-developers.com/r1-hd/development/blu-r1-hd-remove-amazon-ads-ota-updates-t3427303
I suggest you read both and determine the best route for you.
Click to expand...
Click to collapse
Thank you for the response I really appreciate it!
What's the downside of the OTA being disabled btw? I noticed on my link there's a partial and full debloat file. Was going to use the partial since it allows background updating
ebaydan777 said:
Thank you for the response I really appreciate it!
What's the downside of the OTA being disabled btw? I noticed on my link there's a partial and full debloat file. Was going to use the partial since it allows background updating
Click to expand...
Click to collapse
If your rooted with a custom recovery like twrp installed its not really going to matter if OTA is disabled, it won't install an update if your rooted anyways
I recommend to convert your phone to non-Prime.
http://forum.xda-developers.com/r1-hd/how-to/guide-convert-to-prime-rollback-ota-t3432499
Don't use the other debloat link. It's liable to brick your phone.
ColtonDRG said:
I recommend to convert your phone to non-Prime.
http://forum.xda-developers.com/r1-hd/how-to/guide-convert-to-prime-rollback-ota-t3432499
Don't use the other debloat link. It's liable to brick your phone.
Click to expand...
Click to collapse
For whatever reason, the non prime variant has worked out better for me!! I have bounced back and forth a few times, think im on flash #5, I went back to Prime with your 6.1 restore then updated to 6.5 and then TWRP, root and debloat W/ad block and disabled OTA. I have maintained bootloader unlock through all flashes. I'm waiting for some downtime to switch back to non prime and wait for "promised" OTA. Non prime for whatever reason gives me better results with apps not disappearing from adopted storage. Also since 6.5, I have experienced data loss and sometimes very sluggish behavior requiring a reboot to revive performance. Again all related to adopted storage apps. Not sure what's causing it, I'm using the same apps on SD adopted, but non prime seems to be much friendlier to adopted storage than prime?? Maybe its as simple as one of the July security updates broke something, not sure but there is definitely something going on with 65 vs 12. Hopefully the Devs come up with something better we can rely on . All the Drama aside I know I appreciate all the time everybody has put in on this.