Database Develop

[ROM][STABLE][DEEP IDLE] Jonas Hendrickx' ROM

This is a ROM currently being tested for deep idle. I made it to make sure issues can only be caused by custom kernels. More features will come very soon. Just let me know how this ROM runs the Deep Idle mod from Ezekeel.
This ROM doesn't have any fancy things yet. But I tend to add more and more things as I see they are stable.
This ROM will guarantee Deep Idle to work on my settings! Feel free to overclock further if necessary
Features:
-Deodexed
-Rooted
-Zipaligned
-Tweaked
-Cleaned unnecessary applications which are downloadable in Android Market
-init.d support
-Busybox 1.19
-Stable deep idle support
Coming soon
- Ultra fast GPS (preset for European users, can be changed to other countries easily!)
News
- 72 hours and no crashes, freezes or reboots yet with deep idle enabled (posted at 9:00 am 8 December 2011)
Devices
-I9020T
-I9023
-I9020A
Installation
1. Boot into CWM
2. Install official stock GRK39F for best results with deep idle
3. Do not leave CWM
4. Install my ROM immediately over it
5. Install latest GLaDOS kernel, or any other deep idle kernel you like.
6. Wipe data/cache/dalvik
7. Boot your Nexus S
8. Download NSTools from Market
9. Deep idle should now run very stable
Enabling Deep Idle
Flash the kernel of your choice if you want deep idle. This ROM is guaranteed to have deep idle work on your device. If deep idle doesn't work then it is most likely a kernel issue or your device can't handle deep idle. If your phone was having problems with deep idle before on every ROM you tried. Try this one.
Always make sure that when you try deep idle first:
If your Nexus S is more idle than being used:
Freq range: 100-1000
Governor: lazy
Deep Idle: On
Maxfreq: On (Make sure this setting is turned on when using lazy, else your device will run unstable)
Unstable ROMs list for me
- NSCollab: Crashes, freezes and reboots on lockscreen with deep idle enabled when turning on the screen.
- MIUI.us: Giving me random reboots with deep idle and maxfreq enabled
Possible reasons why deep idle is unstable without screenoff_maxfrequency
When using lazy governor. The device stays idle at 100mhz (with its corresponding voltages) and will boost to 1000 mhz or something else when the device becomes active. When deep idle is enabled and the device is in deep idle mode. The device may seem to 'forget' or be 'slower' updating the voltages. When going 1000mhz at the voltage of 100mhz, this will result in a freeze and a reboot. When forcing max frequency with the screen off, this is also avoided. So the device might never freeze and reboot.
When using conservative governor. There may be reboots. But the conservative governor goes up in small steps: 100-200-400-...
So the conservative governor is possibly stable. I even believe 100 mhz and 200 mhz are using the same voltages.
Now this is just a theory I am having. Feel free to have your own.
Coffee fund/beer fund
Feel free to donate if you like my work. But remember I didn't do anything special YET here. More features will come soon! IF you are a developer and you wish to help me on some features, you are welcome. We are a community and should help each other.

Downloads
GRK39F-1 (Crocko)
Click to expand...
Click to collapse
GRK39F-1 (Deposit Files)
Click to expand...
Click to collapse
Screenshot shows a nice horizontal line. I am wondering if someone notices the small green activity during night. I went to the toilet at that point. And after that the color looks more brownish. Does that mean something ?

reserved for changelog
GRK39F-1
- Busybox
- Busybox run-parts
- Cleaned
- Deep Idle Ready
- Deodexed
- Init.d
- Rooted
- Zipaligned
- Removed Google Talk (Preventing Deep Idle)

djjonastybe said:
Howdo I enable init.d on nexus s ?
I start from GRK39F
From my experience with GT-S5660 was to do this in the install-recovery.sh
How is this done on our phone?
My ROM is ready for release in this thread. I only want init.d to work.
Click to expand...
Click to collapse
Put a text file named "something" to the /system/etc/init.d/ folder and done.

removing post

MYPaT said:
Put a text file named "something" to the /system/etc/init.d/ folder and done.
Click to expand...
Click to collapse
Do I have to do something special to get the init.d folder to work first? Or does it work right from the start?
I know I have to place a file in that folder to start the script automatically. I wonder how to get it to work on the Nexus S. For the Galaxy Gio I had to do a work around in the install-recovery.sh

The Busybox runparts must be enabled in the ramdisk, in the init.rc file. Use the dsixda Android kitchen for it.

djjonastybe said:
Do I have to do something special to get the init.d folder to work first? Or does it work right from the start?
I know I have to place a file in that folder to start the script automatically. I wonder how to get it to work on the Nexus S. For the Galaxy Gio I had to do a work around in the install-recovery.sh
Click to expand...
Click to collapse
Make file permissions like the other files in init.d folder and they always will work each boot. Ofcourse you have to use root explorer and you have to make the folder r/w with it.

service sysinit /system/bin/logwrapper /system/xbin/busybox run-parts /system/etc/init.d
disabled
oneshot
Click to expand...
Click to collapse
should i remove the word 'disabled' to get it work? I have these lines.
But I don't see my script working which worked in CM7 NSCollab

Boot.img = ramdisk + zImage

Apparently it was working.
Thanks everyone. Download link is coming.
Any suggestions are welcome.

Glad to see you got your ROM up!
Sent from my Nexus S using XDA App

Glad to see another ROM developer from Tienen or Leuven
Knap werk!

It's Tienen actually!
I believe deep idle is working perfectly. My bootscript logged no reboots.
I had reboots on every MIUI or CM7 based ROM.
This is my log for past 8 hours:

Glad to see you're moving along!
Google Nexus S

[KERNEL][GT-I9100G][GB][28/08/2012]streetware-kernel-0.5.2 #final-release

! ! ! THIS IS A GINGERBREAD KERNEL FOR STOCK ROMS ! ! !​
Click to expand...
Click to collapse
hi all,
i present you the very last version of my streetware-kernel for gingerbread. i think everything is working correctly now, so i can spend all my time on a new project.
if something unfortunately doesn't work, please leave a comment or write a pm.
and now, have a lot of fun with the new streetware-kernel...​
disclaimer:
remember that you flash your device at you own risk. i am not responsible for bricked devices, lost data, lost warranty or anything else, that may be the result of flashing or using this kernel.
Click to expand...
Click to collapse
advice:
don't foget to make a backup of your custom files like init.d-scripts, modules, bootscripts, bootanimations, bootsounds and so on. i have done my best not to touch them, but don't blame me, if they are lost.
Click to expand...
Click to collapse
warning:
i have added an older version of chainsdd's superuser because the new version available on the play store ist still buggy and currently unusable.
if you want to update anyway, you are free to do so, but i recommend you to read the comments on the play store first.
if you accidentally updated superuser and want to get rid of the new version, do the following:
menu-button
settings
applications
manage applications
superuser
uninstall updates
make sure you have unchecked 'allow automatic updating' for chainsdd's superuser until the new version is working correctly.
Click to expand...
Click to collapse
changelog 0.5.1 - 0.5.2:
clockworkmod recovery v5.0.2.8
busybox v1.19.4-cm7
installed in [/sbin]
supersu v0.95
installed in [/system/app]
streetware-tool v0.5.2
this is a command-line tool used to modify kernel-settings and many other things. type 'streetware -h' or 'streetware --help' in your preferred terminal application for more information.
Click to expand...
Click to collapse
general features:
clockworkmod touch recovery v5.0.2.8
busybox v1.19.4-cm7
installed in [/sbin]
busybox v1.20.2-stericson
installed in [/system/xbin]
supersu v0.95
installed in [/system/app]
superuser v3.0.7
not installed per default
cwmmanager v3.0
installed in [/system/app]
cifs-support
module in [/lib/modules]
j4fs-support
module in [/lib/modules]
ntfs-support
module in [/lib/modules]
'ntfs-3g' in [/sbin]
efs-backup
stored in [/mnt/sdcard/streetware/backup/efs]
insecure kernel
settings in [/default.prop]
integrated kernel-tweaks
tweaks in [/misc/streetware/tweaks]
cf-root compatible
properties in [/misc/streetware/settings/cfroot]
cpu frequencies [default]
[200] 400 600 800 1000 [1200]
governors [default]
[abyssplug] aggressive aggressive_x conservative gallimaufry gallimaufry_x hotplug interactive interactive_x lionheart min_max ondemand ondemand_x performance powersave smartass_v2 userspace
schedulers [default]
bfq cfq deadline noop [sio] vr
custom bootscript-support
copy your 'bootscript.sh' in [/system/streetware/bootscript] or [/mnt/sdcard/streetware/bootscript]. if files with the same name are placed in both folders, only the newer one will be used.
custom init.d-support
copy your init.d-scripts in [/system/streetware/init.d] or [/mnt/sdcard/streetware/init.d]. if files with the same name are placed in both folders, only the newer one will be used.
custom modules-support
copy your modules in [/system/streetware/modules] or [/mnt/sdcard/streetware/modules]. if files with the same name are placed in both folders, only the newer one will be used.
custom bootanimation-support
copy your 'bootanimation.zip' in [/system/streetware/bootstyle] or [/mnt/sdcard/streetware/bootstyle]. if files with the same name are placed in both folders, only the newer one will be used.
custom bootlogo-support
copy your 'logo.jpg' in [/system/streetware/bootstyle] or [/mnt/sdcard/streetware/bootstyle]. if files with the same name are placed in both folders, only the newer one will be used. you have to remove the famous yellow triangle or custom bootlogos won't be displayed.
custom bootsound-support
copy your 'PowerOn.wav' in [/system/streetware/bootstyle] or [/mnt/sdcard/streetware/bootstyle]. if files with the same name are placed in both folders, only the newer one will be used.
Click to expand...
Click to collapse
special features:
streetware-tool v0.5.2
this is a command-line tool used to modify kernel-settings and many other things. type 'streetware -h' or streetware --help in your preferred terminal application for more information.
Code:
~ # streetware --help
streetware: display help
usage 'streetware [OPTION]'
-a switch between supersu and superuser
-o toggle cifs-support on and off
-n toggle ntfs-support on and off
-b toggle bootscript-support on and off
-i toggle init.d-support on and off
-m toggle modules-support on and off
-t toggle integrated kernel-tweaks on and off
-f change default cpu-frequency-range
-g change default governor
-s change default scheduler
-l remove custom bootlogo
-u uninstall all changes and files made by this kernel and reboot into recovery-mode
-k backup your current kernel-settings to sdcard
-r reboot with your backup-settings from sdcard
-c check your current kernel-settings for errors and display them
-h display this help
-v display version information
advanced users should try 'streetware --display-all-options' to see a complete list with all options
report bugs at http://forum.xda-developers.com/showthread.php?t=1647393
~ #
advanced-mode
advanced user should try 'streetware --display-all-options' to see a complete list with all options.
Code:
~ # streetware --display-all-options
streetware: display all options
usage 'streetware [OPTION]'
--install-busybox
--uninstall-busybox
--toggle-busybox
--install-cwmmanager
--uninstall-cwmmanager
--toggle-cwmmanager
--install-supersu
--uninstall-supersu
--install-superuser
--uninstall-superuser
--toggle-superuser-application
--enable-all-hubs
--disable-all-hubs
--toggle-all-hubs
--enable-gamehub
--disable-gamehub
--toggle-gamehub
--enable-musichub
--disable-musichub
--toggle-musichub
--enable-readershub
--disable-readershub
--toggle-readershub
--enable-socialhub
--disable-socialhub
--toggle-socialhub
--enable-samsungapps
--disable-samsungapps
--toggle-samsungapps
--enable-cifs-support
--disable-cifs-support
--toggle-cifs-support
--enable-ntfs-support
--disable-ntfs-support
--toggle-ntfs-support
--enable-bootscript-support
--disable-bootscript-support
--toggle-bootscript-support
--enable-initd-support
--disable-initd-support
--toggle-initd-support
--enable-modules-support
--disable-modules-support
--toggle-modules-support
--activate-kernel-tweaks
--deactivate-kernel-tweaks
--toggle-kernel-tweaks
--change-cpu-frequency
--change-governor
--change-scheduler
--change-scheduler-mmcblk0
--change-scheduler-mmcblk1
--install-intro-as-bootlogo
--remove-custom-bootanimation
--remove-custom-bootlogo
--remove-custom-bootsound
--uninstall-kernel-reboot-download
--uninstall-kernel-reboot-normal
--uninstall-kernel-reboot-recovery
--uninstall-kernel-shutdown
--backup-kernel-settings
--restore-backup-settings
--check-kernel-settings
--check-backup-settings
--display-current-settings
--display-intro
--display-readme
--display-all-options
--help
--version
report bugs at http://forum.xda-developers.com/showthread.php?t=1647393
~ #
application-switch
you can switch between supersu and superuser. it's your choice!
backup-option
backup your custom kernel-settings to sdcard. reboot your device with your custom kernel-settings instead of the default settings.
bloatware-option
you can toggle gamehub, musichub, readershub, socialhub and samsungapps with all of their contents on and off.
frequency-settings
change cpu-frequency-range permanently. no need for other applications to do that!
governor-settings
change governors permanently. no need for other applications to do that!
kernel-tweaks
you can toggle the integrated kernel-tweaks on and off. just in case if you want to use your own tweaks.
scheduler-settings
change schedulers permanently. no need for other applications to do that! different schedulers for internal and external storage are also supported!
survival-mode
you will never lose root, even if you delete your su-binary. just reboot your device!
toggle-option
you can toggle things like bootscript-support, cifs-support, init.d-support, modules-support and ntfs-support on and off.
uninstall-option
uninstall all changes made by this kernel on your system-partition and reboot into download-mode or recovery-mode. just in case if you want to flash another kernel and make sure there is no trash left on your device.
Click to expand...
Click to collapse
credits goes to:
chainfire, chainsdd, hanny562, sakindia123, stericson, superatmos and all the others i forgot... :good:
Click to expand...
Click to collapse
thanks goes to:
patschi_ for testing again and again and again... :good:
vehlan for testing :good:
Click to expand...
Click to collapse
latest version:
streetware-kernel-0.5.2-final-release.tar.md5
flash with odin
the first boot after flashing needs a little bit more time (~60 seconds on my device). please be patient.
streetware-kernel-0.5.2-final-release.zip
flash with cwm recovery
the first boot after flashing needs a little bit more time (~60 seconds on my device). please be patient.
streetware-kernel-0.5.2-README
complete readme, changelog and detailed explanation
Click to expand...
Click to collapse
older versions:
streetware-kernel-0.5.1-final-release.tar.md5
flash with odin
the first boot after flashing needs a little bit more time (~60 seconds on my device). please be patient.
streetware-kernel-0.5.1-final-release.zip
flash with cwm recovery
the first boot after flashing needs a little bit more time (~60 seconds on my device). please be patient.
streetware-kernel-0.5.1-README
complete readme, changelog and detailed explanation
streetware-kernel-0.5-final-release.tar.md5
flash with odin
the first boot after flashing needs a little bit more time (~60 seconds on my device). please be patient.
streetware-kernel-0.5-final-release.zip
flash with cwm recovery
the first boot after flashing needs a little bit more time (~60 seconds on my device). please be patient.
streetware-kernel-0.5-README
complete readme, changelog and detailed explanation
streetware-kernel-0.4.4-final-release.tar.md5
flash with odin
streetware-kernel-0.4.4-final-release.zip
flash with cwm recovery
streetware-kernel-0.4.4-README
complete readme, changelog and detailed explanation
Click to expand...
Click to collapse
last but not least:
if you like this work, please hit the thanks-button...
Click to expand...
Click to collapse

Thank you for new Kernel testing it

Street79 said:
hi all,
the last few days i spent my time on learning how to compile a kernel, add new features to the source code and so on. the most time i spent on writing scripts, to make many things as easy as possible. and that's the result:
streetware-kernel-0.4 #final-release
i've been testing this kernel the last days and everything seems to work fine. but if something unfortunately doesn't work or if you have any suggestions, please leave a comment...
and now, have a lot of fun...
Click to expand...
Click to collapse
thanks ! i'm testing

i cant download..when i click the link..it show nothing..can you give me another link..
edit...now i can download it ..my connection was sux ...nice kernel..thanks for your gud work..
Sent from my GT-I9100G using XDA

testing...

Hope a good kernel. Testing ...

cant use pattern pin or password lock

Street79 said:
hi all,
the last few days i spent my time on learning how to compile a kernel, add new features to the source code and so on. the most time i spent on writing scripts, to make many things as easy as possible. and that's the result:
streetware-kernel-0.4 #final-release
i've been testing this kernel the last days and everything seems to work fine. but if something unfortunately doesn't work or if you have any suggestions, please leave a comment...
and now, have a lot of fun...
Click to expand...
Click to collapse
Great ~! Will try it ~

Gonna give it a try

xguestx said:
cant use pattern pin or password lock
Click to expand...
Click to collapse
thanks for the hint. i will fix it soon...

Good kernel...great batery life..
Sent from my GT-I9100G using Tapatalk 2

It looks good!!! thanks!!

rascal123 said:
Good kernel...great batery life..
Sent from my GT-I9100G using Tapatalk 2
Click to expand...
Click to collapse
What rom u are using ?

@Street 79- Galaxy S2 i9100G kernel has a ton of bloat ,i can help u strip it if u want and make the kernel faster and smaller.What say?

sakindia123 said:
@Street 79- Galaxy S2 i9100G kernel has a ton of bloat ,i can help u strip it if u want and make the kernel faster and smaller.What say?
Click to expand...
Click to collapse
okay, let's do it... thanks for the offer!
i will upload my kernel source later, so we can have a look together what to do...
Sent from my GT-I9100G using xda premium

Thank you for the new kernel. I will try it, when I have chance to download my connection are to bad atm
Gesendet mit meinem I9100G - GaLaXy Rom 5.1 & Lucifr 1.6 200 Ver

Ratheesh143 said:
What rom u are using ?
Click to expand...
Click to collapse
im on this rom
http://forum.xda-developers.com/showthread.php?t=1629030

xguestx said:
cant use pattern pin or password lock
Click to expand...
Click to collapse
fixed...

Hi Street79
When you mention "place an empty file called..." do you mean empty FOLDER ?

great kernel by now...
thanks for the good work. this kernel makes my i9100g realy faster and without any problems by now. still using it and will report any problem, but seem flawless.
thanks,
and i hope some day we could be able to overclock our processors, just wondering how good the benchmark scores can go up.

Gear2 Neo and TizenMod v.2.0 by Skin1980

Hi all my friends, just to let you now that I flashed the TizenMod v.2.0 by Skin1980 on my Gear2 Neo with success all working 100% so far no bug found @ moment.
I also installed new pack icons .
I hope someone from moderation team will post the ROM here
For now I have uploaded a video on youtube........happy flashing
http://youtu.be/YJUD60z-eok
Original post by Skin1980
Hi all my friends, i'm here to present the First Tizen Custom Rom for Gear 2.
Features:
- Based on the last NE5;
- Rooted;
- battery saver tnx to a specific script that help when u use the gear with non samsung phone;
- boot animation and shutdown animation changed with Tizen stock from emulator;
- removed camera sound;
- added Android L font (roboto light);
New in v2.0:
- added the options to install custom ringtones, alarms and alerts;
- added the options to install custom boot and shoutdown animations;
- added the option to install custom icon (only for stock apps ATM);
- added the option to install custom fonts (broken ATM... need test);
- added the option to set cpu governor ( slp ( stock), tizen_phone, ondemand_org, powersave, performance);
- added the option to set cpu max freq ( 800Mhz, 700Mhz, 600Mhz, 400Mhz);
New in v2.1:
- fixed the installation of custom stuff (ringtones, fonts ecc...) Is important that fonts and audio file don't contain space or special char. The mp3s works fine.
- fixed cpu governor ( need confirm );
Installation:
To install this you have first to update the gear to the last NE5 FW:
1- Reboot gear in download mode;
2- Download Odin 3.09
3- in AP field select the ROM file;
4- Press start and wait till finish..
DOWNLOAD
HOWTO:
In order to use all the customization options you need to use sdb:
1- enable USB debug in the watch settings;
2- connect the watch to the PC and open a shell
3- navigate to the folder where u put the sdb binary and then:
Code:
sdb root on
Code:
sdb shell
...now you are in the gear shell, so:
setup folders with:
Code:
setup-folder.sh
...this script create some folders on your gear mass-memory, accessible from windows or linux, just copy your ringtones, alarms, alerts, fonts into the relative folders.
- The custom boot and shutdown animations must be copy into the root and must be renamed to poweron.edj and poweroff.edj
- The icons must be renamed like the ones u find in the simple theme attached at this post ( take care of the size);
...then do these commands to install your stuff:
Code:
install-ringtones.sh
Code:
install-alarms.sh
Code:
install-alert.sh
Code:
install-shutdownanimation.sh
Code:
install-bootanimation.sh
Code:
install-theme.sh
Code:
install-fonts.sh
To adjust the cpu max freq and governor:
Code:
set-cpu-governor
Code:
set-cpu-maxfreq
.. a textual menu will be showed, select a number and press enter. The settings will stick over reboot.
Suggest are welcome.
Old Version Download:
- v1.0 HERE
IMPORTANT: I don't have the device so can't test this (but i'm pretty sure all is ok) if u can let me know if all works. Tnx.
Credits mpogr for the battery script.
This ROM doesn't include a Kernel!
If I deserve you can buy me a beer​

r2d2_boss said:
Hi all my friends, just to let you now that I flashed the TizenMod v.2.0 by Skin1980 on my Gear2 Neo with success all working 100% so far no bug found @ moment.
I also installed new pack icons .
I hope someone from moderation team will post the ROM here
For now I have uploaded a video on youtube........happy flashing
http://youtu.be/YJUD60z-eok
Click to expand...
Click to collapse
Tnx again my friend... This saves me a lot of time
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app

I have done the same and its perfect

I understand this is a rom but ...what exactly does this do? Will this let me use any phone and still download apps from Samsung ? Am I able to return back to stock if I don't like it? Sorry for all the noobness but I don't see where an faq might be .

treezy26 said:
I understand this is a rom but ...what exactly does this do? Will this let me use any phone and still download apps from Samsung ? Am I able to return back to stock if I don't like it? Sorry for all the noobness but I don't see where an faq might be .
Click to expand...
Click to collapse
Features:
- Based on the last NF1;
- Rooted;
- battery saver tnx to a specific script that help when u use the gear with non samsung phone;
- boot animation and shutdown animation changed with Tizen stock from emulator;
- removed camera sound;
- added Android L font (roboto light);
New in v2.0:
- added the options to install custom ringtones, alarms and alerts;
- added the options to install custom boot and shoutdown animations;
- added the option to install custom icon (only for stock apps ATM);
- added the option to install custom fonts (broken ATM... need test);
- added the option to set cpu governor ( slp ( stock), tizen_phone, ondemand_org, powersave, performance);
- added the option to set cpu max freq ( 800Mhz, 700Mhz, 600Mhz, 400Mhz);
Installation:
To install this you have first to update the gear to the last NF1 FW:
1- Reboot gear in download mode;
2- Download Odin 3.09
3- in AP field select the ROM file;
4- Press start and wait till finish..

So awesome. Thanks!

This seems to imply that any Gear 2 ROM will run on the Neo, and it just ignores the Gear 2 camera and IR blaster. If so, anyone trying to port Android Wear would do well to just port it to the Gear 2 and the Neo will probably work too.

Does this rom trick the phone to think it's a Samsung phone so I can download apps from Samsung store?

JimSmith94 said:
This seems to imply that any Gear 2 ROM will run on the Neo, and it just ignores the Gear 2 camera and IR blaster. If so, anyone trying to port Android Wear would do well to just port it to the Gear 2 and the Neo will probably work too.
Click to expand...
Click to collapse
Gear 2 Neo has the IR Blaster (doesn't it?) so it's just the camera that's the difference - so yes as you say, any Gear 2 ROM should in theory work with Neo too. Fingers crossed.....

gav2fc said:
Gear 2 Neo has the IR Blaster (doesn't it?) so it's just the camera that's the difference - so yes as you say, any Gear 2 ROM should in theory work with Neo too. Fingers crossed.....
Click to expand...
Click to collapse
Yes, you're right, my bad.

hi, there is any way to going back to the original rom when we flash this one? Thanks

mimi1305 said:
hi, there is any way to going back to the original rom when we flash this one? Thanks
Click to expand...
Click to collapse
yes you can go back any time

v2.1 on line!!! happy flashing
New in v2.1:
- fixed the installation of custom stuff (ringtones, fonts ecc...) Is important that fonts and audio file don't contain space or special char. The mp3s works fine.
- fixed cpu governor ( need confirm );
DOWNLOAD

Will this rom trick my phone to thinking its a Samsung phone so I can download apps for it?

treezy26 said:
Will this rom trick my phone to thinking its a Samsung phone so I can download apps for it?
Click to expand...
Click to collapse
I am interested in this as well .

This post just put a massive smile on my face, gonna install now and test over the next few days. Will let you know how I get on.

You need to edit your build.prop to trick Samsung apps app in thinking its a genuine Samsung phone

hashcheck said:
You need to edit your build.prop to trick Samsung apps app in thinking its a genuine Samsung phone
Click to expand...
Click to collapse
And how would one go about doing that?

Can someone please answer if after installing this or other rom can use any android phone? I have the lg g(not the watch) and dont want to buy something useless
Στάλθηκε από το GT-P7510 μου χρησιμοποιώντας Tapatalk

ok,i've flash and put my own theme color and font,work really well!
But the watch on remote app is missing for the theme :/ any idea?
and,there is any possibility to edit the font color? thx

[KERNEL][Sony MM][12.05.16] Abricot kernel v8.1

Introduction
Hello dear developers and android hackers,
On this thread, I will share with you a project I am developing as I am learning kernel programming / hacking. This kernel is based on Sony kernel sources with some enhancements for battery saving and performance.
Click to expand...
Click to collapse
Features
Based on Sony 23.5.A.0.570 kernel sources
Compiled with linaro GCC 4.9.1 toolchain, -O3
Governors : interactive, ondemand, performance, conservative, smartassV2, intellidemand2 and intelliactive.
Fast hotplug
CPU overclock up to 2.8 GHz Thank's to Faux123 and DooMLoRD
Changed GPU frequency table to 27 - 657 MHz Thank's to Myself5
Sony RIC disabled
Undervolt
TWRP recovery included, fota partition support
Breathing notification light thank's to glocklee
Force Fast Charge
KCAL Advanced color control Thank's to savoca
Click to expand...
Click to collapse
Installation instructions
Code:
Use this kernel at you own risk !
I am not responsible for any damage or problem.
Flash the zip via recovery
Reboot
Click to expand...
Click to collapse
Download
Please read FAQ and second post if you have any issue
Recovery flashable zip :
Abricot kernel v8.1.zip
mirror
Kernel Source :
Kernel
Ramdisk
Click to expand...
Click to collapse
Changelog
Abricot kernel v8.1 : 12.05.16
Disable RIC at kernel level (Fixes partition mounting in recovery)
Add KCAL Advanced color control Thank's to savoca
Abricot kernel v8 : 10.05.16
Based on Sony sources 23.5.A.0.570
Updated TWRP to version 3.0.2-0
Abricot kernel v7 : 01.04.15
Updated to Lollipop kernel sources 23.1.A.0.690
Update TWRP to 2.8.5.0
Add Force Fast Charge
Removed splash screen
Abricot kernel v6 : 24.12.14
Fix default freq not applying for all cores at boot
Fix -O3 compiler optimization
Fast hotplug : plug in cores in descending order
Abricot kernel v5 : 15.12.14
Increase voltage of higher frequency for better stability
Add support for displaying the number of tasks running
Add VR, SIO and FIFO schedulers
Add lagfree governor
Update TWRP to 2.8.1.0
Fix scaling_max_freq permissions
Set default frequency to 2.3GHz
Abricot kernel v4 : 11.12.14
Add CPU overclock up to 2.8 GHz (Thank's to Faux123 and DooMLoRD)
Change GPU frequency table to 27 - 657 MHz (Thank's to Myself5)
Disable Sony RIC
Remove msm_mpdecision
Set qcom mpdecision as default
Abricot kernel v3 : 07.12.14
First public release
Check my github to see all the changes.
Click to expand...
Click to collapse
FAQ
Q : With what ROM can I use this kernel ?
A : With any ROM based on Sony stock Marshmallow
Q : Your kernel isn't working / My phone isn't booting anymore
A : Read this whole post once more, search for your problem in thread and report it if you haven't found a solution.
Q : Can I install this kernel on locked bootloader ?
A : No ! This kernel is only for unlocked bootloader.
Q : Does this kernel include recovery ?
A : Yes ! You can access by pressing buttons when the led is lighting. Volume down to go to TWRP and Volume up to load recovery from FOTA..
Q : What are mpdecision and fast hotplug ?
A : This is what manage your cpu cores and decide which core will be online. Fast hotplug is a brand new hotplug that I wrote. See next post for more information
Click to expand...
Click to collapse
Thanks To/Credits
* Sony for their sources and device
* @DooMLoRD
* @thewadegeek for his Tutorial
* @show-p1984 for his mpdecision
* @glocklee for his breating notification mod
* @Envious_Data for his help and links
* @dssmex
* @Androguide.fr for Pimp my Z1
* bbedward
* Erasmux
* faux123
* The xda community for making me discover android and for answering so many of my questions
* Google for kernel sources and its search engine
* Apple for making expensive phone so that I never bought one of theirs
Click to expand...
Click to collapse
Please let me know per pm if there is any mistake or misspelled word in this thread. Automatic correction does a great job but since english isn't my mother thongue I'm pretty sure I made mistakes.
XDA:DevDB Information
Abricot kernel, Kernel for the Sony Xperia Z2
Contributors
pec0ra
Source Code: https://github.com/pec0ra/abricot
Kernel Special Features:
Version Information
Status: Testing
Created 2014-12-07
Last Updated 2016-05-20

About Fast hotplug
Motivation
I wasn't convinced by show-p's msm_mpdecision nor faux123's intelli_plug ( I don't even talk about qcom mpdecision ). I also wanted to start working on a bigger programming project to learn more about kernel developing so I decided to write my own hotplug.
Main features
I tried to make fast hotplug the lightest possible, so that it consumes the less resources possible when it is not needed (mainly at idle). One of the second goals was to make it customizable.
How to use
Deactivate qcom mpdecision (Pimp my Z1 will do this automatically when you choose fast hotplug)
Activate fast_hotplug
Code:
adb shell "echo 1 > /sys/module/fast_hotplug/parameters/fast_hotplug_enabled"
Tune it to your liking
How to configure
Unfortunately, there isn't yet any user friendly application to configure fast hotplug. The only way to configure it is to manually edit the module files with adb or a file editor.
I modified Pimp my Z1 to be compatible with fast hotplug. You can find the modified version at post 12
You can also find all the parameters at
Code:
/sys/module/fast_hotplug/parameters/
and edit them with adb command
Code:
adb shell "echo [COLOR="Navy"]<value>[/COLOR] > /sys/module/fast_hotplug/parameters/[COLOR="Navy"]<variable_name>[/COLOR]"
You can configure the following parameters :
fast_hotplug_enabled : 0 for disabled, 1 for enabled
boost_duration : Duration of boost in ms when screen is touched
threshold_to_boost : Instead of automatically pluging in cores on touch, fast hotplug checks that the load is above this threshold. This avoid cores coming online when reading file or website.
max_cpu_on : Maximum number of online cpu when screen is on
min_cpu_on : Minimum number of online cpu when screen is on
idle_threshold : Threshold under which fast_hotplug will remain almost idle and won't perform any check. This applies when only 1 core is online
plug_in_core_X_threshold : with X between 1 and 3. This is the threshold to plug in coreX.
plug_in_core_X_delay : This is the number of fast_hotplug cycles (see refresh_rate) to skip before pluging in coreX.
plug_out_core_X_threshold : Like plug_in_core_X_threshold but to plug out.
plug_out_core_X_delay
refresh_rate : Time in ms between fast hotplugs checks
screen_off_singlecore : 1 for activated, 0 for deactivated; Allows only one core to be online when screen is off.
If you are using linux, you can easily change the configuration with this small program : https://github.com/pec0ra/fast_hotplug_controller
You will probably want to create init.d script to make your configuration stay after reboot. If enough users want it, I can create an example of script.
Bugs / stability
Due to some conflicts with qcom mpdecision, it is possible that you encounter some bugs / reboots when both are enabled.
Configuration doesn't stick after reboots
Help needed
If you are a java developer (or want to learn ) and want to help in developing an app (or editing an already existing one) to control the hotplug, please send me a pm
Please tell me your impression, your custom configuration and / or your recommendation so that I can make it better in future releases.

Good luck.
Will try as soon as I can. :good:

Welcome! :good:

pec0ra said:
Help needed
If you are a java developer (or want to learn ) and want to help in developing an app (or editing an already existing one) to control the hotplug, please send me a pm
Click to expand...
Click to collapse
Regarding this, there is already an app out there that is FOSS, licensed under the GPLv2 license, looks sexy and should be easy to modify. It's called Pimp My Z1, I think it offers pretty much everything you want.
Other than that, cool that you're developing something new, I'll give it a shot!
Edit:
You may want to disable Sony's RIC it prevents you from writing to /system. This should help you.

I can't seen to get notification breath effect,i didn't do the mpdecision step,so could this make the diference?

Is this kernel compatible with franco kernel apps?
Sent from my D6503 using XDA Free mobile app

B1nny said:
Regarding this, there is already an app out there that is FOSS, licensed under the GPLv2 license, looks sexy and should be easy to modify. It's called Pimp My Z1, I think it offers pretty much everything you want.
Other than that, cool that you're developing something new, I'll give it a shot!
Edit:
You may want to disable Sony's RIC it prevents you from writing to /system. This should help you.
Click to expand...
Click to collapse
Thank you for the link
I'll see if I can do something with this app when I have more time (I've never made any android app).
Disabling ric is a good idea I'll do this for next version.
FrosteezBR said:
I can't seen to get notification breath effect,i didn't do the mpdecision step,so could this make the diference?
Click to expand...
Click to collapse
No, mpdecision won't affect it. Have you tried it on YadliKernel ? Did it work for all the notifications ? It seems like on abricot kernel they work for most of the notifications but not for sms.
vendetta718 said:
Is this kernel compatible with franco kernel apps?
Sent from my D6503 using XDA Free mobile app
Click to expand...
Click to collapse
It is probably compatible (I didn't tried it) but you will probably not be able to change most of the configurations since they are not implemented in my kernel. Some configuration from my kernel (like fast hotplug) are also not implemented in the app so you can't change them from there.

pec0ra said:
Thank you for the link
I'll see if I can do something with this app when I have more time (I've never made any android app).
Disabling ric is a good idea I'll do this for next version.
No, mpdecision won't affect it. Have you tried it on YadliKernel ? Did it work for all the notifications ? It seems like on abricot kernel they work for most of the notifications but not for sms.
It is probably compatible (I didn't tried it) but you will probably not be able to change most of the configurations since they are not implemented in my kernel. Some configuration from my kernel (like fast hotplug) are also not implemented in the app so you can't change them from there.
Click to expand...
Click to collapse
i try with facebook,whatsapp,messaging and gmail
with a led tester its the same blink as stock
would i send you a dsmeg or anything?

FrosteezBR said:
i try with facebook,whatsapp,messaging and gmail
with a led tester its the same blink as stock
would i send you a dsmeg or anything?
Click to expand...
Click to collapse
There's no printing in the mod I think so dmesg would be useless. I'll try again with WhatsApp. Have you tried it on other kernels? Was it working ?
Edit : ok, maybe there is an error... In this case dmesg could be useful. If you have time you can send it, yes.
And I reconfirm that it works for telegram

Hey, can someone show us the notification mod?

Pimp my Z1
As @B1nny suggested, I tried editing Pimp my Z1 to add fast hotplug support. Everything seems to work and I even added some tweaks for a better support for our Z2 ( some default values were not really compatible with our device ). There are probably bugs for configurations other than fast hotplug. If I have time, I will fix them but for now, please use another app to set your frequencies / governors / voltage or live with the bugs. If you have questions about the app, you could also take a look at the official thread to see if it is already there or maybe just to give the dev a thanks.
I'll probably make a pull request to @Androguide.fr with the changes but until then you can use my own build linked to this post. If you already have the app installed, you will have to uninstall it first because signature is different.
You can see the full source and the changes on my github : https://github.com/pec0ra/Pimp_my_Z1
Special thanks to @Androguide.fr for his great app and to @B1nny for his link

@pec0ra
Good news to have a new kernel dev for our beloved Z2 !
However, I've tried to flash your kernel, the flashing process seems to work correctly but actually I stay stuck to the last doomlord advanced stock kernel. Any suggestion ?

nreuge said:
@pec0ra
Good news to have a new kernel dev for our beloved Z2 !
However, I've tried to flash your kernel, the flashing process seems to work correctly but actually I stay stuck to the last doomlord advanced stock kernel. Any suggestion ?
Click to expand...
Click to collapse
You should try to extract the .elf from the zip and flash it via fastboot
Code:
fastboot flash boot <name>.elf
Anyone else experiencing the same issue ? Maybe I did something wrong in my zip.

pec0ra said:
You should try to extract the .elf from the zip and flash it via fastboot
Code:
fastboot flash boot <name>.elf
Anyone else experiencing the same issue ? Maybe I did something wrong in my zip.
Click to expand...
Click to collapse
I think you mean the .img file instead of .elf.
Other than that, the kernel works fine for me. I did manually flash it via fastboot. (because I prefer to flash it via fastboot)
I took a quick look at your updater-script and compared it to Doomlord's updater-script and this is what I found:
Your script tries to write the kernel to this partition:
Code:
/dev/block/platform/msm_sdcc.1/by-name/Kernel
While Doomlord's script writes the kernel to this partition:
Code:
/dev/block/platform/msm_sdcc.1/by-name/boot
Maybe that's the culprit?

B1nny said:
I took a quick look at your updater-script and compared it to Doomlord's updater-script and this is what I found:
Your script tries to write the kernel to this partition:
Code:
/dev/block/platform/msm_sdcc.1/by-name/Kernel
While Doomlord's script writes the kernel to this partition:
Code:
/dev/block/platform/msm_sdcc.1/by-name/boot
Maybe that's the culprit?
Click to expand...
Click to collapse
I was going to post the same thing
Waiting for confirmation...

B1nny said:
I think you mean the .img file instead of .elf.
Other than that, the kernel works fine for me. I did manually flash it via fastboot. (because I prefer to flash it via fastboot)
I took a quick look at your updater-script and compared it to Doomlord's updater-script and this is what I found:
Your script tries to write the kernel to this partition:
Code:
/dev/block/platform/msm_sdcc.1/by-name/Kernel
While Doomlord's script writes the kernel to this partition:
Code:
/dev/block/platform/msm_sdcc.1/by-name/boot
Maybe that's the culprit?
Click to expand...
Click to collapse
Thank you
Yes, I meant .img. It seems like it'll take some time to get used to this new device. The kernel destination you pointed out is probably the issue, yes. And that's probably the notification problem too. Seems like the kernel never got flashed so it's logical that notification mod doesn't work...
I'll change this tomorrow morning
Maybe someone can test it until then.

pec0ra said:
Thank you
Yes, I meant .img. It seems like it'll take some time to get used to this new device. The kernel destination you pointed out is probably the issue, yes. And that's probably the notification problem too. Seems like the kernel never got flashed so it's logical that notification mod doesn't work...
I'll change this tomorrow morning
Maybe someone can test it until then.
Click to expand...
Click to collapse
Yes, this was indeed the issue, I've just succesfully flashed your kernel changing "Kernel" to "boot" in the script.
Now testing

I can't rename mpdecision.. I tried with root explorer and root browser

sh4d1t0 said:
I can't rename mpdecision.. I tried with root explorer and root browser
Click to expand...
Click to collapse
That's due to Sony's RIC being enabled by default. If you look at my previous post where I mention it there is a command you can run in ADB to temporarily disable it, not ideal but it will help you rename the file.

physwizz a21s kernel version 1.5

Based on a217f
Version 2 is here
physwizz a21s kernel version 1.5
Based on a217f Version 2 is here https://forum.xda-developers.com/t/physwizz-a21s-kernel-version-1-5.4359957/page-3#post-86991813 For OneUI 3.1 v1.5 (May also work for GSIs) Samsung securities disabled More CPU governors Conservative...
forum.xda-developers.com
For OneUI 3.1 v1.5
(May also work for GSIs)
Samsung securities disabled
More CPU governors
Conservative, On-demand, Userspace, powersave, performance, energy_step, shedutil
Optimised for performance
Overclocked for performance
Underclocked for battery
CPU: 130MHz - 2210MHz
lz4 compression added to zram
Preparation
Install adb tools on pc
allow from unknown sources on phone developer settings
Installation
Connect phone to PC
Copy zip file to adb folder on pc
Open terminal on pc
Navigate to adb folder
Type
adb sideload **.zip
reboot
Go to settings, about phone, software information
For Zram
Go to HKtweaks- virtual memory
Turn off zram
increase swappiness to 200
choose lz4
increase size to 4096
turn on Zram
Magisk modules in post #2
Kernel source code
physwizz - Repositories
physwizz has 172 repositories available. Follow their code on GitHub.
github.com
@physwizz

I also have 2 Magisk modules to go with my kernel.
physwizz debloat module v2
(Added a70 changes)
With physwizz-2 app
Magisk module to debloat any Samsung phone to remove all the apps that slow down the phone
To debloat:
Install the module from Magisk and reboot.
To rebloat:
delete the module in Magisk and reboot
wizzROM Creator module v2
for all Samsung a-series phones
Turn any stock or custom OneUI into a QwizzROM or RwizzROM
OneUI 2.0 will become QwizzROM
OneUI 3.1 will become RwizzROM
Debloated ROM with Extras
Extras:
Battery charge limit
Clean Master
ES file explorer
HKtweaks
SimpleReboot
Root Explorer
Zarchiver
physwizz-2
Make sure your OneUI ROM iis running befote you start
Installation
1 Backup system from recovery
2 Install the creator from Magisk
3 Reboot
4 Enjoy
Name your wizzROM (optional)
1. Use a root explorer to copy and paste system/build.prop to new location
2. Edit build.prop like this
ro.build.display.id=<your-name>
3. Use zarchiver to paste the new build.prop into the system folder inside wizzROM-creator.zip
4. Install wizzROM-creator.zip
@physwizz

sideload in lineage recovery ?
also do we need flash dm veriety thing?
can you provide details more specific if you dont mind....
what recovery do we need

NuzzaimStark said:
sideload in lineage recovery ?
also do we need flash dm veriety thing?
can you provide details more specific if you dont mind....
what recovery do we need
Click to expand...
Click to collapse
You don't need dmverity. It is only for preventing encrypted data.
As far as i know you don't need lineage recovery but I'll confirm with my testers.
I have a127f and I have twrp

NuzzaimStark said:
sideload in lineage recovery ?
also do we need flash dm veriety thing?
can you provide details more specific if you dont mind....
what recovery do we need
Click to expand...
Click to collapse
Check the new instructions

what recovery do we need
physwizz said:
Check the new instructions
Click to expand...
Click to collapse
Thumbs up for the work
Working on mine
A217F/DS
Lineage Os 18.1
Rooted
Can you do something on gpu ?..
There is some fps gain..by the way and I like this kernel..
Now I can jump in bootcamp..in PUBG/BGMI
In Duo

NuzzaimStark said:
what recovery do we need
Thumbs up for the work
Working on mine
A217F/DS
Lineage Os 18.1
Rooted
Can you do something on gpu ?..
There is some fps gain..by the way and I like this kernel..
Now I can jump in bootcamp..in PUBG/BGMI
In Duo
Click to expand...
Click to collapse
When I work out how to do the GPU in my a127f I'll also do it on you a21s.
A21s (New)
A21s (SM-A217F/M) discussion and development
t.me

works for sm-a217m

Ganzl 29482 said:
works for sm-a217m
Click to expand...
Click to collapse
Yes?

physwizz said:
You don't need dmverity. It is only for preventing encrypted data.
As far as i know you don't need lineage recovery but I'll confirm with my testers.
I have a127f and I have twrp
Click to expand...
Click to collapse
what version of twrp are you using with the a21f? and where do i get it? and it works fine?

[email protected] said:
what version of twrp are you using with the a21f? and where do i get it? and it works fine?
Click to expand...
Click to collapse
I don't have a217f.
I have a127f.
TWRP for a217f is being developed here https://t.me/joinchat/19IDHssAXUxjZTI1

physwizz said:
I don't have a217f.
I have a127f.
TWRP for a217f is being developed here https://t.me/joinchat/19IDHssAXUxjZTI1
Click to expand...
Click to collapse
Okay thanks yes n meant to say a217f. Im looking for a working TWRP for sm-a217f

[email protected] said:
Okay thanks yes n meant to say a217f. Im looking for a working TWRP for sm-a217f
Click to expand...
Click to collapse
Yes,
It's now working for a217f

physwizz said:
Yes?
Click to expand...
Click to collapse
Yes, it's working on SM-a217M, thank you so much for your effort .
But I encountered a problem, every time I boot up the phone, this message shows up (I can't print): "There's an internal problem with your device. Contact your manufacturer for details."
Also, can you fix the CPU clock to 2.21Ghz for a217M? Or enable it to modifying up to 1.58Ghz? Because my phone always keeps it at 1.58GHz or sometimes at 1.84Ghz, rarely at 2.21Ghz, and it does not increase more than that (1.58Ghz) manually using HKtweaks or 3C CPU or whatever overclocking app. I can only change the governors or decrease the clock. Thank you

AvanGLiT said:
Yes, it's working on SM-a217M, thank you so much for your effort .
But I encountered a problem, every time I boot up the phone, this message shows up (I can't print): "There's an internal problem with your device. Contact your manufacturer for details."
Also, can you fix the CPU clock to 2.21Ghz for a217M? Or enable it to modifying up to 1.58Ghz? Because my phone always keeps it at 1.58GHz or sometimes at 1.84Ghz, rarely at 2.21Ghz, and it does not increase more than that (1.58Ghz) manually using HKtweaks or 3C CPU or whatever overclocking app. I can only change the governors or decrease the clock. Thank you
Click to expand...
Click to collapse
1. that error message is normal.
2. To force it up to the highest you have to use Hktweaks to set the minimum values to maximum.
I have a127f .
My benchmarks are below

physwizz said:
1. that error message is normal.
2. To force it up to the highest you have to use Hktweaks to set the minimum values to maximum.
I have a127f .
My benchmarks are below
Click to expand...
Click to collapse
Thank you, I tried that but unfortunately did not work, the cpu always drops keeping at 1.58Ghz or 1.84Ghz.
But I found that changing some values from config_chipset.json and config_vendor.json files at "/vendor/etc" to 100%, it keeps the CPU stable at 2,21Ghz as well the GPU.
This file schedules performance for some apps and 'occasions', like if I scroll down photos from Galery the CPU drops to 1.4Ghz, and if I close, the CPU goes back to 1.58Ghz. So that was the problem. Changing some values to 100% fixed that, now I'm able to control the clock normally.

tell me how do you change which app?

NuzzaimStark said:
tell me how do you change which app?
Click to expand...
Click to collapse
Root Explorer with its own text editor. I just changed the "Value" : "xxx" to "Value" : "100%" of CPUMinFreq, CPUMaxFreq and GPUMinFreq.
For example: the "Hint": "GALLERY_SCROLL", changes/drops the frequency of CPU and GPU when you scroll your pictures down or up, if you change to 100% of each value, the frequencies will not drop. So you will expect more performance scrolling your pictures.

AvanGLiT said:
Root Explorer with its own text editor. I just changed the "Value" : "xxx" to "Value" : "100%" of CPUMinFreq, CPUMaxFreq and GPUMinFreq.
For example: the "Hint": "GALLERY_SCROLL", changes/drops the frequency of CPU and GPU when you scroll your pictures down or up, if you change to 100% of each value, the frequencies will not drop. So you will expect more performance scrolling your pictures.
Click to expand...
Click to collapse
Can you run a benchmark on geekbench 5?