FRP Locked no flashing at fastboot mod P9+ VIE-L29 ( anyone help ) - Huawei P9 Plus Questions & Answers

any know this proplem ...??? can help me

I had the sam problem: I thunk you have PIN and/or Fingerprint Security. I had to reset device and ended first-run-wizard without PIN or any other security - the i was able to flash Recovery through fastboot.

Also turn off Phone Finder...but as what @urbanrural said best way is to factory reset

im try all this step but still cant unlock bootloader... FRP lock at fastboot mode

Go to settings
Developers options
Enable OEM unlock

ccgchhun said:
any know this proplem ...??? can help me
Click to expand...
Click to collapse
you have recovery stock or twrp?

M.KK said:
you have recovery stock or twrp?
Click to expand...
Click to collapse
stock ...!!! im enable oem unlock but at fastboot mod still FRPlock so i can't unlock bootloader or flash any thing

ccgchhun said:
stock ...!!! im enable oem unlock but at fastboot mod still FRPlock so i can't unlock bootloader or flash any thing
Click to expand...
Click to collapse
you can put dload folder in sd card whith stock rom and flash it 3 buton com.
https://www.youtube.com/watch?v=I-EBFGtb2LA&app=desktop

just try putting a pin or a fingerprint lock.. an see if it change.. after you tick the oem unlock on the developer mode

Had the same problem excatly, and solved by flashing C686 stock firmware using firmware updater tool through computer, make sure to disable pin and fingerprint. Other options including placing the firmware in dload file won't help.

wshanty said:
Had the same problem excatly, and solved by flashing C686 stock firmware using firmware updater tool through computer, make sure to disable pin and fingerprint. Other options including placing the firmware in dload file won't help.
Click to expand...
Click to collapse
can u share link for download C686..!!! what tool that i should to use for this problem

Hi, form here: http://forum.xda-developers.com/showthread.php?t=3435878
Follow the instruction and image will be downloaded from the tool itself

wshanty said:
Hi, form here: http://forum.xda-developers.com/showthread.php?t=3435878
Follow the instruction and image will be downloaded from the tool itself
Click to expand...
Click to collapse
sorry ..i don know how to use this tool...!!! press start but nth to do

Have you set the proxy in HiSuite to 127.0.0.1 and port to 41279 as instructed in the post?. It is important to follow the instructions litterally.

Settings > About phone > Build number (7X TAP)
Settings > Developer options > Enable OEM Unlock

Related

Theme is not working

Hello,
I am not be able to use the theme after I unlock and relock BL.
I can't flash cust and userdata: update_data_full_hw_meafnaf.zip
Tried to add it to Dload but it is not detected
Please help
Here's how I fixed it (YMMV). http://forum.xda-developers.com/p9/help/stock-rom-download-t3378806/post66873456#post66873456
I have exactly the same issue from a relock and a lock on EU version.
engineer000 said:
Hello,
I am not be able to use the theme after I unlock and relock BL.
I can't flash cust and userdata: update_data_full_hw_meafnaf.zip
Tried to add it to Dload but it is not detected
Please help
Click to expand...
Click to collapse
easy to use SRK Tool to flash it back
-unlock bootloader
-flash twrp
-flash super su
-use SRK tools to flash theme
-flash update.app if you need to revert recovery or unroot, force update.app if to relockbootloader
itongx said:
easy to use SRK Tool to flash it back
-unlock bootloader
-flash twrp
-flash super su
-use SRK tools to flash theme
-flash update.app if you need to revert recovery or unroot, force update.app if to relockbootloader
Click to expand...
Click to collapse
Thank you. Here's what I did.
When I see the message saying you need decryption key, I tried to unlock again the bootloader. It does factory reset afterwards.
I forced flash update.app, relock bootloader and I got an issue with themes.
To fix that, I unlocked bootloader and flash TWRP. I flashed the data zip bundled on the firmware. Flashed again the stock recovery and update.app
Relock again the bootloader and it did a factory reset again
after that, its all stock
Thanks guys
engineer000 said:
Thank you. Here's what I did.
When I see the message saying you need decryption key, I tried to unlock again the bootloader. It does factory reset afterwards.
I forced flash update.app, relock bootloader and I got an issue with themes.
To fix that, I unlocked bootloader and flash TWRP. I flashed the data zip bundled on the firmware. Flashed again the stock recovery and update.app
Relock again the bootloader and it did a factory reset again
after that, its all stock
Thanks guys
Click to expand...
Click to collapse
I have done same method but I facing update failed after flash update.app did you put then force update ?
itongx said:
I have done same method but I facing update failed after flash update.app did you put then force update ?
Click to expand...
Click to collapse
I only do a force update. Used TWRP to flash the 2nd datafile that have the theme.
Hello to all. here I have a small worries. I have installed the 1st time flight Android no / emui 5.0 not finalize on my p9, i've had the right to many crashes and losses autonomy. then I lead to the shop Huawei to put the b166 this walk ... However, since i've more themes default p9, i've more magazine. and when j'applique another theme this does not work ... if someone that's help m'its would be nice.
edit: I have been able to install the version c432b170 but nothing make no change.
engineer000 said:
Thank you. Here's what I did.
When I see the message saying you need decryption key, I tried to unlock again the bootloader. It does factory reset afterwards.
I forced flash update.app, relock bootloader and I got an issue with themes.
To fix that, I unlocked bootloader and flash TWRP. I flashed the data zip bundled on the firmware. Flashed again the stock recovery and update.app
Relock again the bootloader and it did a factory reset again
after that, its all stock
Thanks guys
Click to expand...
Click to collapse
Hi, can you please provide further explanation? Which data file is that? How do i flash it? I just sold my p9 and forgot about this theme issue coz i was using nova (while i manage to get the BL Code from Huawei). Now the owner is upset, please help.
ravefolk said:
Hi, can you please provide further explanation? Which data file is that? How do i flash it? I just sold my p9 and forgot about this theme issue coz i was using nova (while i manage to get the BL Code from Huawei). Now the owner is upset, please help.
Click to expand...
Click to collapse
You need to find the zip file update_data_full_hw_meafnaf.zip and flash it on TWRP. it may varies per model and I forget where I downloaded. What version you have? L09 or L19?
engineer000 said:
You need to find the zip file update_data_full_hw_meafnaf.zip and flash it on TWRP. it may varies per model and I forget where I downloaded. What version you have? L09 or L19?
Click to expand...
Click to collapse
Mine is L09, and TWRP is not booting, stuck ate splashscreen, any ideas?
UPADTE: TWRP ISSUE SOLVED
ravefolk said:
Mine is L09, and TWRP is not booting, stuck ate splashscreen, any ideas?
UPADTE: TWRP ISSUE SOLVED
Click to expand...
Click to collapse
how about repairing from the PC app from huawei like a PC Suite? Flashrom from TWRP? or forced flashing the zip file. find more on the forums. I already left p9 months ako. im using op3 now
engineer000 said:
You need to find the zip file update_data_full_hw_meafnaf.zip and flash it on TWRP. it may varies per model and I forget where I downloaded. What version you have? L09 or L19?
Click to expand...
Click to collapse
Same problem here my model is L19 where can I download update_data_full_hw_meafnaf.zip ?
Thanks
khampasith said:
Same problem here my model is L19 where can I download update_data_full_hw_meafnaf.zip ?
Thanks
Click to expand...
Click to collapse
check the following links:
http://consumer.huawei.com/pk/support/products/downloads/detail/huawei-p9-pk.htm?id=91684
Seems like i got it here: http://huaweidevices.ru/category/huawei-p9-eva-l19
Sorry. Can't remember exactly.
engineer000 said:
check the following links:
http://consumer.huawei.com/pk/support/products/downloads/detail/huawei-p9-pk.htm?id=91684
Seems like i got it here: http://huaweidevices.ru/category/huawei-p9-eva-l19
Sorry. Can't remember exactly.
Click to expand...
Click to collapse
Which one should i download ? The link contain several ones
I have the same problem as well. Hope someone can share clear instruction on how to solve the problem. Thanks
itongx said:
easy to use SRK Tool to flash it back
-unlock bootloader
-flash twrp
-flash super su
-use SRK tools to flash theme
-flash update.app if you need to revert recovery or unroot, force update.app if to relockbootloader
Click to expand...
Click to collapse
Thanks a lot Man ! that worked For me and everything is working even Magazine Unlock ! :laugh:
Just Download SRK tool and Follow itongx instructions ....
masoudshojaei20 said:
Thanks a lot Man ! that worked For me and everything is working even Magazine Unlock ! :laugh:
Just Download SRK tool and Follow itongx instructions ....
Click to expand...
Click to collapse
Hi can you elaborate or explain what it means by use the SRK tool to flash themes?
I'm browsing thru the tool interface and I cant find this option.
FYI My phone is not yet unlock BL / Root / connected to PC. I;m just preparing.
lee82gx said:
Hi can you elaborate or explain what it means by use the SRK tool to flash themes?
I'm browsing thru the tool interface and I cant find this option.
FYI My phone is not yet unlock BL / Root / connected to PC. I;m just preparing.
Click to expand...
Click to collapse
Hi....
First you choose Utility in SRK Tools and then choose "install /data/hw_init", on your phone you should accept supersu request and Done!
this is my solution ( made by me ) after trying many solutions over this forum @ other forums
just
1- delete any folder for themes u made (as hw_init or themes in root folder or at any site )
2- make folder & name it ( HWTHemes ) in internal memory
3- download this folder & put it inside (HWTHemes )
4- go to themes app and chose ** Aqua theme ** & apply it
5- no need to change any permissions
this was try on huawei y 7 2017

FRP unlock

Is there any way to unlock frp from the fastboot if the bootloader is unlocked and the device is bricked.
Already tried : fastboot oem relock xxxxx
Returns : command not allowed
I am on stock recovery and the device is bricked right now.
Help needed!Many thanks!
did you try to install stock rom with dload folder method
else you can use DC Phoenix to fix your phone
xzanium said:
did you try to install stock rom with dload folder method
else you can use DC Phoenix to fix your phone
Click to expand...
Click to collapse
Dload doesnt work.How can dc phoenex be used? Can you provide any links to a good guide?
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
you must boot into bootloader then flash the stock rom (UPDATE.APP) with the phoenix software (paid service ~15€) then you must re-install the stock rom again with dload methode to get a clean system on your phone
xzanium said:
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
you must boot into bootloader then flash the stock rom (UPDATE.APP) with the phoenix software (paid service ~15€) then you must re-install the stock rom again with dload methode to get a clean system on your phone
Click to expand...
Click to collapse
I am from Pakistan...there seems to be no method to buy credits in Pakistan...can you please tell me how can buy credits?
sorry my friend, I can't help you cause I can't pay from my country too
Salman Farooq01 said:
Is there any way to unlock frp from the fastboot if the bootloader is unlocked and the device is bricked.
Already tried : fastboot oem relock xxxxx
Returns : command not allowed
I am on stock recovery and the device is bricked right now.
Help needed!Many thanks!
Click to expand...
Click to collapse
Try booting into eRecovery (Power+Volume Up+USB plugged in) to restore the system which [will] wipe all data (excluding /sdcard)

Unable to Root SM-950F Enynos Variant

Hello guys
Im unable to root my SM-950F With the current Firmware:
PDA/AP N950FXXU2BQL6
CSC N950FOXM2BQKG
MODEM/CP N950FXXU2BQKG
I had OEM unlock after 7 days, I was able to install twrp and boot in it, and installed magisk and all was "fine", but after the first reboot, at the top of the splash screen i have a red message "Only official released binaries are allowed to be flashed" and i not able to boot or go to recovery, I had to reflash the stock firmware to boot the system again, now OEM unlock option gone again.
Is there any solution to this?
Thanks
Darkzide86 said:
Hello guys
Im unable to root my SM-950F With the current Firmware:
PDA/AP N950FXXU2BQL6
CSC N950FOXM2BQKG
MODEM/CP N950FXXU2BQKG
I had OEM unlock after 7 days, I was able to install twrp and boot in it, and installed magisk and all was "fine", but after the first reboot, at the top of the splash screen i have a red message "Only official released binaries are allowed to be flashed" and i not able to boot or go to recovery, I had to reflash the stock firmware to boot the system again, now OEM unlock option gone again.
Is there any solution to this?
Thanks
Click to expand...
Click to collapse
You would have needed to toggle the oem switch once you flashed everything and booted up for first time. If you reboot without toggling at that point then you are put in 'jail'. Back to stock now for 7 days until the toggle reappears, and then you can do it all over. Read through the oem unlock thread for more info while you wait
I have the same problem!
jcvivo25 said:
I have the same problem!
Click to expand...
Click to collapse
Ok...so the same answers apply to you too then
sefrcoko said:
You would have needed to toggle the oem switch once you flashed everything and booted up for first time. If you reboot without toggling at that point then you are put in 'jail'. Back to stock now for 7 days until the toggle reappears, and then you can do it all over. Read through the oem unlock thread for more info while you wait
Click to expand...
Click to collapse
OEM unlock back sooner as expected, tried what you said and i have the same problem
Darkzide86 said:
OEM unlock back sooner as expected, tried what you said and i have the same problem
Click to expand...
Click to collapse
Hmm that should have worked... Try posting in the root/magisk threads for help with troubleshooting further, as it's probably related to some of the specific steps you're supposed to follow along the way.
Dr. Ketan updated the root guide, see post 1 here: https://forum.xda-developers.com/showthread.php?p=73878540
sefrcoko said:
Hmm that should have worked... Try posting in the root/magisk threads for help with troubleshooting further, as it's probably related to some of the specific steps you're supposed to follow along the way.
Click to expand...
Click to collapse
Hi
Just to be clear the OEM toggle must be on or off before the first reboot?
Thanks
Darkzide86 said:
Hello guys
Im unable to root my SM-950F With the current Firmware:
PDA/AP N950FXXU2BQL6
CSC N950FOXM2BQKG
MODEM/CP N950FXXU2BQKG
I had OEM unlock after 7 days, I was able to install twrp and boot in it, and installed magisk and all was "fine", but after the first reboot, at the top of the splash screen i have a red message "Only official released binaries are allowed to be flashed" and i not able to boot or go to recovery, I had to reflash the stock firmware to boot the system again, now OEM unlock option gone again.
Is there any solution to this?
Thanks
Click to expand...
Click to collapse
I just went through this error after following this tutorial ... I also do in the tutorial, do carefully that will work
https://forum.xda-developers.com/ga...t/recovery-twrp-galaxy-note-8-exynos-t3674036
Darkzide86 said:
Hi
Just to be clear the OEM toggle must be on or off before the first reboot?
Thanks
Click to expand...
Click to collapse
OEM Unlock should be toggled on. If it's off, turn it on before reboot.

MI A2 not receiving OTA

Just bought MI A2 from official dealer and the phone is stuck on Android one version 8.1.0 and not getting PIE via OTA.
Is there a safe method to manually install the latest stock PIE version of android one ?
Is it possible the update was removed from the servers ?
kalda01 said:
Just bought MI A2 from official dealer and the phone is stuck on Android one version 8.1.0 and not getting PIE via OTA.
Is there a safe method to manually install the latest stock PIE version of android one ?
Is it possible the update was removed from the servers ?
Click to expand...
Click to collapse
Use this method:
https://forum.xda-developers.com/mi-a2/how-to/fastboot-xiaomi-mi-a2-fastboot-images-t3824849
It's officially
d3rt0xx said:
Use this method:
https://forum.xda-developers.com/mi-a2/how-to/fastboot-xiaomi-mi-a2-fastboot-images-t3824849
It's officially
Click to expand...
Click to collapse
Just to clarify, using this method will not void the warranty ?
kalda01 said:
Just to clarify, using this method will not void the warranty ?
Click to expand...
Click to collapse
Yes, it's safe and the official way
d3rt0xx said:
Use this method:
https://forum.xda-developers.com/mi-a2/how-to/fastboot-xiaomi-mi-a2-fastboot-images-t3824849
It's officially
Click to expand...
Click to collapse
d3rt0xx said:
Yes, it's safe and the official way
Click to expand...
Click to collapse
Can the stock rom be applied by booting into recovery mode and using the apply update from SD card ?
kalda01 said:
Can the stock rom be applied by booting into recovery mode and using the apply update from SD card ?
Click to expand...
Click to collapse
Just use the MiFlashTool.
It's easy to use
d3rt0xx said:
Just use the MiFlashTool.
It's easy to use
Click to expand...
Click to collapse
I have the MI FLASH TOOL installed but it would not succeed to install the drivers.
I assume nothing will work if windows does not have correct drivers installed.
Can I install the fastboot driver manually ? which driver ?
Btw, the phone is detected in fastboot mode by the FASTBOOT/ADB command line interface. Is that helpfull to me ?
kalda01 said:
I have the MI FLASH TOOL installed but it would not succeed to install the drivers.
I assume nothing will work if windows does not have correct drivers installed.
Can I install the fastboot driver manually ? which driver ?
Btw, the phone is detected in fastboot mode by the FASTBOOT/ADB command line interface. Is that helpfull to me ?
Click to expand...
Click to collapse
Yes it's helpful, but my english isnt good enough to explain the next steps
kalda01 said:
Just bought MI A2 from official dealer and the phone is stuck on Android one version 8.1.0 and not getting PIE via OTA.
Is there a safe method to manually install the latest stock PIE version of android one ?
Is it possible the update was removed from the servers ?
Click to expand...
Click to collapse
Afaik...to flash latest pie base firmware, first you need to unlock your phone's bootloader and then only you can flash available fastboot firmware (pie based) using MiFlash tool.
Try to OTA update using WiFi(Keep the phone to airplane mode and just turn on the WiFi and then try to update). Also before updating the phone just turn on the oem unlock switch under developer option on safer side so you can unlock your bootloader later if anything goes wrong while updating your device since many people have reported that they've bricked their device during updating their device..
Updaing to PIE was successfull.
Used this guide to unlock bootloader: https://www.androidexplained.com/mi-a2-unlock-bootloader/
Then used the MI FLASH tool to apply the stock rom. First atemp failed with "write error" after 55 seconds, but I tried a second time and this time the process completed.
kalda01 said:
Updaing to PIE was successfull.
Used this guide to unlock bootloader: https://www.androidexplained.com/mi-a2-unlock-bootloader/
Then used the MI FLASH tool to apply the stock rom. First atemp failed with "write error" after 55 seconds, but I tried a second time and this time the process completed.
Click to expand...
Click to collapse
I hope you flash both this fastboot codes when unlocked your bootloader.
Code:
fastboot flashing unlock
fastboot flashing unlock_critical
Unlock_Critical is require to flash custom roms and if you would want to revert back to stock from custom rom.
NE0HP said:
I hope you flash both this fastboot codes when unlocked your bootloader.
Code:
fastboot flashing unlock
fastboot flashing unlock_critical
Unlock_Critical is require to flash custom roms and if you would want to revert back to stock from custom rom.
Click to expand...
Click to collapse
Yes, did both commands. However, after flashing PIE via the flash tool, the bootloader became locked again.
kalda01 said:
I hope you flash both this fastboot codes when unlocked your bootloader.
Yes, did both commands. However, after flashing PIE via the flash tool, the bootloader became locked again.
Click to expand...
Click to collapse
You must have selected "flash all and lock" under MiFlash tool so it lock the bootloader as well but now you know how to unlock it so do it whenever you feel like unlocking your bootloader..

Question how to get rid of Dm-VERITY corruption on boot

Hey guys.. just updating you all
in all of my (previous ) test to get my patched boot.img
i've got this initial msg on my boot :
dm-verity corruption
your device is corrupt.
it can't be trusted and my not work properly.
press enter button to continue.
Or, device will power off in 5s.
(written in white)
NOW i tell that it didn't happen after bootloader unlock (so it was unlocked and all good no problem )
but honestly i don't remember if that happened when i tried to upload official rom through Miflash !
Anyway is there any way to remove this? I re installed ( clean install ) official Rom and it's still there, locked bootloader back and it's still there tried some
fastboot oem enable_dm_verity
i'm also warning new user that you might get this msg at boot !
thanks
forget this..i've got ROOT check the other thread !
How do you fix it?
simika said:
forget this..i've got ROOT check the other thread !
Click to expand...
Click to collapse
How did you managed to fix this?
by reading lol.. check the other thread all written
For reference to whoever that are confused about where to look for the solution.
ROOT GAINED !!!!
THIS METHOD WORKS on both: POCO M3 Pro / Redmi Note 10 5G hey guys.. wonderful news.. been trying here and there and IT WORKS FINALLY i gained root of POCO m3 Pro 5G ! i'll write in steps how it works and post all files i've been using...
forum.xda-developers.com
Download the vbmeta and flash it via fastboot to get rid of the dm-verify.
simika said:
by reading lol.. check the other thread all written
Click to expand...
Click to collapse
Could you reference a link or give me a little how to?
I tried a lot now:
- Installed a new Firmware trough Fastboot
- Using MsmDownload Tool
nothing helped so far.
So it would be great if you could assist in any way.
simika said:
Hey guys.. just updating you all
in all of my (previous ) test to get my patched boot.img
i've got this initial msg on my boot :
dm-verity corruption
your device is corrupt.
it can't be trusted and my not work properly.
press enter button to continue.
Or, device will power off in 5s.
(written in white)
NOW i tell that it didn't happen after bootloader unlock (so it was unlocked and all good no problem )
but honestly i don't remember if that happened when i tried to upload official rom through Miflash !
Anyway is there any way to remove this? I re installed ( clean install ) official Rom and it's still there, locked bootloader back and it's still there tried some
fastboot oem enable_dm_verity
i'm also warning new user that you might get this msg at boot !
thanks
Click to expand...
Click to collapse
I done everything but my phone doesn't unlock so now I have the dm-verity warning and I can't do a clean flash with Miflash. Also Miflash Unlock doesn't work. What I can do now?
if you can enter in fastboot mode, reflash stock boot and vbmeta
wetito said:
if you can enter in fastboot mode, reflash stock boot and vbmeta
Click to expand...
Click to collapse
How can I do? Miflash says:
error:Writing 'crclist' FAILED (remote: 'not allowed in locked state')
bro you have relock bootloader, this is a fatal error. the only way is try to unlock with an mtk tool that do this via pc. you can find on internet. search unlock all mtk devices. i think there a link also on xda
Just realized that the M3 thread, my phone is a M4.
.
@simika how are you sending this question?
1. Hello friends, there are two ways to fix this problem, first you need Root, I read your Root tutorial, your tutorial is very good, and after using Root, you need to download any file manager, give Root Permissions, you need to backup your baseband, nvram nvdata nvcfg backup and save, you also need an MTK Bypass, you can search for MTK Auth Bypass Tool through Google, you also need to use SP Flash to flash the machine, you need to download the official firmware package, which can be downloaded from xiaomirom.com , download the corresponding version, use SP Flash to read your firmware package, after the reading is completed, choose to format all and download, wait for completion, press the power button after completion, you will find that the error has disappeared, but the baseband is lost, But you have backed up. Boot through fastboot to unlock the BL lock, perform fastboot flash nvram ....... fastboot flash nvdata ....... fastboot flash nvcfg ....... Fastboot reboot reboot. Congratulations The baseband is back, I'm a novice, my instructions are not comprehensive, such as where is the baseband location, but I have too many characters, I will list the baseband location. 2. Replace a new motherboard, all mobile phone problems are all solve.
Hope to help you.
wetito said:
if you can enter in fastboot mode, reflash stock boot and vbmeta
Click to expand...
Click to collapse
Thanks. This worked on my Umidigi A11 phone.
xdadev_user11 said:
Thanks. This worked on my Umidigi A11 phone.
Click to expand...
Click to collapse
nice!
hello i got the same problem today, my phone is redmi9a can some help me regarding to this error ?
i had this problem even though i never unlocked my bootloader so i couldnt flash anything to fix it. but when i got the miui 13 update it fixed it for me
wetito said:
if you can enter in fastboot mode, reflash stock boot and vbmeta
Click to expand...
Click to collapse
What if you cant enter fastboot?

Categories

Resources