Hi,
I have the Huawei P9 EVA-L09C671B138, I am looking for an updated firmware.
any assistance would be appreciated.
Thanks
http://forum.xda-developers.com/p9/how-to/l19c432-forced-update-to-b180-t3471916
Your customization is C671,you dont install FW L09C432B182 without change oeminfo. First you must change oeminfo and custom.bin from C671 to C432 using SRK Tools. And then flash FW L09C432B182.
hanniSK said:
Your customization is C671,you dont install FW L09C432B182 without change oeminfo. First you must change oeminfo and custom.bin from C671 to C432 using SRK Tools. And then flash FW L09C432B182.
Click to expand...
Click to collapse
Thanks for the quick response, can you please elaborate regarding SRK tools. Do I need to root or flash anything or just use the tool to edit the 2 files you referred to.
????
You must first unlock bootloader and root. Then use SRK tool.
Thank You
I have managed to complete this and update to B182 :good:
How to update to Android 7? Which FW is correct and the link
Related
Request oeminfo Al10,C432 and C185 anyone who can backup and upload to me ? I will packe in my tool.
somboons said:
Request oeminfo Al10,C432 and C185 anyone who can backup and upload to me ? I will packe in my tool.
Click to expand...
Click to collapse
I have oeminfo to C636 but maby u dont need that?
Mostar088 said:
I have oeminfo to C636 but maby u dont need that?
Click to expand...
Click to collapse
Already packing in my tool , Thanks
somboons said:
Already packing in my tool , Thanks
Click to expand...
Click to collapse
Can u please make a Quick guide how to change oeminfo with your tool?
Mostar088 said:
Can u please make a Quick guide how to change oeminfo with your tool?
Click to expand...
Click to collapse
OK.
From main menu choose 7 > sub menu choose 9 > then choose your device.After finished your device will be reboot. you must root before change oeminfo.
somboons said:
OK.
From main menu choose 7 > sub menu choose 9 > then choose your device.After finished your device will be reboot. you must root before change oeminfo.
Click to expand...
Click to collapse
Do i do that after a flash the firmware or before i flash the firmware? And do i need to flash custom.bin to?
Mostar088 said:
Do i do that after a flash the firmware or before i flash the firmware? And do i need to flash custom.bin to?
Click to expand...
Click to collapse
if you would like to debrand to another varaint , you have to do (oeminfo+custom.bin) before install firmware.
Sent from my HUAWEI NXT-L29 using Tapatalk
somboons said:
if you would like to debrand to another varaint , you have to do (oeminfo+custom.bin) before install firmware.
Click to expand...
Click to collapse
What i want to do is update my L29C636B103 with C432B161 firmware and my phone will become C900B161. After that i want to convert it back to C636B161. What is the right way to go?
Mostar088 said:
What i want to do is update my L29C636B103 with C432B161 firmware and my phone will become C900B161. After that i want to convert it back to C636B161. What is the right way to go?
Click to expand...
Click to collapse
unlock bootloader > install twrp > root > change oeminfo and custom.bin > fastboot stock recovery > dload
after finished your phone become c432 and it can any ota from c432 firmware.
if you would like to go back to c636 , you can do with the same method.
Sent from my HUAWEI NXT-L29 using Tapatalk
somboons said:
unlock bootloader > install twrp > root > change oeminfo and custom.bin > fastboot stock recovery > dload
after finished your phone become c432 and it can any ota from c432 firmware.
if you would like to go back to c636 , you can do with the same method.
Sent from my HUAWEI NXT-L29 using Tapatalk
Click to expand...
Click to collapse
When i`m on the device with firmware L09-C02B127 (vodafone) and make an update to L09-C900B161 -> i can go the same way to flash stock europe version - c432Bxxx?
mowlwoorf said:
When i`m on the device with firmware L09-C02B127 (vodafone) and make an update to L09-C900B161 -> i can go the same way to flash stock europe version - c432Bxxx?
Click to expand...
Click to collapse
Did u get yhe C432 oeminfo?
No, i dont have this file :/ but it`s in somboons tool? So i do the steps with his tool and be fine?
EDIT: It seems, that this tool dont support the L09 device for oeminfo change. The data/files are there i mean, but in the menu are only the other modells supported. right? I wait, till all works over the tool!
I need the oeminfo of AL10 to restore it in my Huawei.........
Please!!!!!!
newmann80 said:
I need the oeminfo of AL10 to restore it in my Huawei.........
Please!!!!!!
Click to expand...
Click to collapse
You can find it in this tool:
https://forum.xda-developers.com/p9-plus/development/tool-srk-tool-huawei-bootloader-root-t3405999
I need the oeminfo C150 for VIE-L09 (P9 Plus), thanks!!
Does anyone have the oeminfo file for New Zealand (C706)? Or maybe a way to edit a current oeminfo (I have C432 oeminfo)?
Or can it be extracted somehow from the stock firmware (VIE-L09C706B150) so I can flash it?
Need it to return completely to stock for a warranty issue.
Thanks.
dmccort said:
Does anyone have the oeminfo file for New Zealand (C706)? Or maybe a way to edit a current oeminfo (I have C432 oeminfo)?
Or can it be extracted somehow from the stock firmware (VIE-L09C706B150) so I can flash it?
Need it to return completely to stock for a warranty issue.
Thanks.
Click to expand...
Click to collapse
custom bin
oeminfo
remove NZ from their file names
ali3nfr3ak said:
custom bin
oeminfo
remove NZ from their file names
Click to expand...
Click to collapse
Legend!
Works perfectly, thanks! :good:
hey guys...
i need ominfo vie-L29c for eu.. (VIE-L29C185B380)
i have only asia.. (VIE-L29C636B103)
Hey guys
Just one, very noob question.. I'm new in Huawei and got stuck on B170 firmware, when B180 update is currently available.
I'd like to update it via this programm: http://forum.xda-developers.com/p9/development/huawei-p9-p9-plus-firmware-updater-t3435873
And... I don't know what is what :E
So... my compilation number is EVA-L09C432B170 and now:
EVA-L09 is a hardware number like D6503?
C432 is customization like CE1 in Sony?
B170 is firmware version like 23.1.A.1.28?
Am I right? If so, do I have to choose in this program EVA-L09 C432 B180?
Bruce666 said:
Hey guys
Just one, very noob question.. I'm new in Huawei and got stuck on B170 firmware, when B180 update is currently available.
I'd like to update it via this programm: http://forum.xda-developers.com/p9/development/huawei-p9-p9-plus-firmware-updater-t3435873
And... I don't know what is what :E
So... my compilation number is EVA-L09C432B170 and now:
EVA-L09 is a hardware number like D6503?
C432 is customization like CE1 in Sony?
B170 is firmware version like 23.1.A.1.28?
Am I right? If so, do I have to choose in this program EVA-L09 C432 B180?
Click to expand...
Click to collapse
Download the B180 update put the UPDATE.APP on the internal storage in the dload folder turn off phone and hold the update button combination this is the easiest way!
EVA-L09 = Model number
C432 = Country (custom package code)
B180 = Firmware version
So basicly yes your right!
safariking said:
Download the B180 update put the UPDATE.APP on the internal storage in the dload folder turn off phone and hold the update button combination this is the easiest way!
EVA-L09 = Model number
C432 = Country (custom package code)
B180 = Firmware version
So basicly yes your right!
Click to expand...
Click to collapse
Nice. Thanks a lot m8. So if I will download file with these parameters there is a risk of brick?
Bruce666 said:
Nice. Thanks a lot m8. So if I will download file with these parameters there is a risk of brick?
Click to expand...
Click to collapse
No if you have the EVA-L09 C432 model download that update file if you have another model number download that update file.
Volume Up + Volume Down and Power Button together to get in upgrade mode.
Hello fellow P9 owners, I do have a EVA-L19-C185, may I use another customisation firmware? Or I MUST use one with EXACT "L19" an "C185" codes?
Thank you very much!
Bruce666 said:
Hey guys
Just one, very noob question.. I'm new in Huawei and got stuck on B170 firmware, when B180 update is currently available.
I'd like to update it via this programm: http://forum.xda-developers.com/p9/development/huawei-p9-p9-plus-firmware-updater-t3435873
And... I don't know what is what :E
So... my compilation number is EVA-L09C432B170 and now:
EVA-L09 is a hardware number like D6503?
C432 is customization like CE1 in Sony?
B170 is firmware version like 23.1.A.1.28?
Am I right? If so, do I have to choose in this program EVA-L09 C432 B180?
Click to expand...
Click to collapse
Just for the record, the tool you mentioned is used in conjunction with HiSuite. Basically it forces HiSuite to update your phone even if there wasn't any update available for your phone (Firmware gets downloaded from different servers as stated in the thread so as usual there is some risk involved I guess).
You connect the P9 to your PC and open up HiSuite, then you open the updater tool and select your firmware. In the HiSuite settings you have to change to proxy settings to those given by the updater tool. And finally you just use the HiSuite system update button. Then it will go and download and install the firmware you've selected in the update tool.
Didn't even erase my data when I upgraded from B166 to 180 this way. Just had to flash custom recovery/root/xposed again and I was good to go.
nostromo76 said:
Hello fellow P9 owners, I do have a EVA-L19-C185, may I use another customisation firmware? Or I MUST use one with EXACT "L19" an "C185" codes?
Thank you very much!
Click to expand...
Click to collapse
Only install the EVA-L19 firmware!
Hello! Did stupid thing, changed oeminfo from L19 to L09, and didnt create backup.
Can someone, who using EVA-L19C432B161 or b182, and who are rooted his phone, create oeminfo backup file with SRK Tools (here , and put files here? Please, it wulda be nice, if i culda change it back from l09 to l19
how backup it?
Open srk, conect phone, in skr chose 5 option Backup
Then 1 oeminfo and 2 custom.bin
thease files will be in "Restore-oeminfo-custombin" folder at SRK tools folder..
ok, dont need anymore.. Find it in this site. Used custom.bin what was in SRK Tools and this file, worked as planed
Oeminfo and custom.bin from EVA-L19:
https://uloz.to/!KaCfQNJ9SJ36/oeminfo-eva-l19-zip
hello, did you know debrand from L09 to L19? If so, how would you guide me?
Arnys said:
Hello! Did stupid thing, changed oeminfo from L19 to L09, and didnt create backup.
Can someone, who using EVA-L19C432B161 or b182, and who are rooted his phone, create oeminfo backup file with SRK Tools (here , and put files here? Please, it wulda be nice, if i culda change it back from l09 to l19
how backup it?
Open srk, conect phone, in skr chose 5 option Backup
Then 1 oeminfo and 2 custom.bin
thease files will be in "Restore-oeminfo-custombin" folder at SRK tools folder..
ok, dont need anymore.. Find it in this site. Used custom.bin what was in SRK Tools and this file, worked as planed
Click to expand...
Click to collapse
cuchuoizanh said:
hello, did you know debrand from L09 to L19? If so, how would you guide me?
Click to expand...
Click to collapse
if i remember correct, you need to be on marshmalow, android 6, then you can do it with srk tools
but before somthing change, create backup..
Arnys said:
if i remember correct, you need to be on marshmalow, android 6, then you can do it with srk tools
but before somthing change, create backup..
Click to expand...
Click to collapse
Can you be more specific? I'm in mm. Do you need to flash oeminfo through twrp before? please help
cuchuoizanh said:
Can you be more specific? I'm in mm. Do you need to flash oeminfo through twrp before? please help
Click to expand...
Click to collapse
i dont know how debrand from L09 to L19, my phone alredy are L19.
you need custom.bin and oeminfo from l19 marshmalow, i got nuget b398, and cant help you.
you can download it - hanniSK gived link.
downlod srk tools, copy downloaded files to srk tools forlder Restore-oeminfo-custombin, open srk tools ,go restore, and restore thease files, then,download eve-l19c432b161 or any other C, depends what you want, and with dload method upload it .. maybe i will mising somthing, i dont know, but if you will not use dc phoenix what cost 15€, i cant help you, because all thease things i did when was bricekd hard my phone, and with 72 hours I played with phone, to see what i can, and cant!
cuchuoizanh said:
hello, did you know debrand from L09 to L19? If so, how would you guide me?
Click to expand...
Click to collapse
Look at this thread
https://forum.xda-developers.com/showpost.php?p=75418876&postcount=8
Last week I tried to de-brand from C34 to C636. No matter what I did, I always ended up with the C900 firmware.
Managed to flash back to C34 and in the process flashed the "optus/au" AND "hw/normal" folders to /CUST/
The result was a successful flash back to C34, build number reading correctly, Optus branding on startup and everything sorted. But I'm still trying to get to the bottom of how this all works.
What I noticed last night is that the Project Menu is now usable (*#*#2846579#*#*) previously blocked by the Optus build. On further inspection, I am also missing 'custom.bin' that by my understanding tells the phone where to look for build-specific files on the CUST partition.
Questions:
1. Without custom.bin - how does the phone know which folders to access in CUST?
2. If I were to add a custom.bin that directed to the /hw/normal folder on CUST, how will this affect my Optus firmware.
3. Still trying to work out why the de-brand didn't work to C636 and my best guess is that the oeminfo I flashed didn't match the exact build of the firmware OR I didn't flash it right- can anyone confirm how specific oeminfo is to the firmware version?
Any help is appreciated. Just trying to learn.
Thanks.
halliday77 said:
3. Still trying to work out why the de-brand didn't work to C636 and my best guess is that the oeminfo I flashed didn't match the exact build of the firmware OR I didn't flash it right- can anyone confirm how specific oeminfo is to the firmware version?
Click to expand...
Click to collapse
Where did you get the C636 oeminfo and custom.bin from?
Z-Blade said:
Where did you get the C636 oeminfo and custom.bin from?
Click to expand...
Click to collapse
oeminfo from this post.
Custom.bin I copied from the SKR tool files. Technically the C636 files on the SKR tool are for the dual sim variant - so I can't use the oeminfo, but the actual contents of custom.bin are a single file path, so it shouldn't matter.
halliday77 said:
oeminfo from this post.
Custom.bin I copied from the SKR tool files. Technically the C636 files on the SKR tool are for the dual sim variant - so I can't use the oeminfo, but the actual contents of custom.bin are a single file path, so it shouldn't matter.
Click to expand...
Click to collapse
I see, I did something similar but ultimately I just went to C432 and now I am rather happy I did change it to C432. I am getting updates much sooner and I have no issues at all with this firmware.
Also, when I backed up my oeminfo and custom.bin using the SRK and then restoring it, this broke my P9, so I dont trust the backup feature of the SRK tool.
How would you add a custom.bin manually? I've bricked my phone, but I have the backed up oeminfo and custom.bin and root access via the terminal in twrp. I found out where to flash the oeminfo but not the custom.bin. Thanks in advance!
CanIHelp said:
How would you add a custom.bin manually? I've bricked my phone, but I have the backed up oeminfo and custom.bin and root access via the terminal in twrp. I found out where to flash the oeminfo but not the custom.bin. Thanks in advance!
Click to expand...
Click to collapse
I have same problem...
Did You found solution?
I dont have OTA updates after the L19 C185 B220 , think i am too optimistic waiting on updates
Its time for rooting and update to Naugut. Confused with with which build to flash. Help me out guys
Unlock bootloader . Install twrp . Root
Then use srk tool to debrand to c636 . Then flash c636b190 by 3 button . Then ota update to c636b391 .
hlcm151 said:
Unlock bootloader . Install twrp . Root
Then use srk tool to debrand to c636 . Then flash c636b190 by 3 button . Then ota update to c636b391 .
Click to expand...
Click to collapse
after debranding with SRK build no. is showing c900b220!!
Am i missing something should i flash a diffirent stock rom before debranding?
Errors on SRK tool while changing ro.build:
sed: no temp file
mount: Read only file system