Related
Just flashed Sinless ROM and although it came with SuperSU by chainfire. I decided I wanted to remove it and install superuser by clockworkmod instead. For some reason superuser app didn't actually root the system, so I attempted to uninstall it and reinstall SuperSU. This is where I'm stuck. I cannot remove superuser app no matter what I try, even deleting it with a file manager or disabling the app. Anyone have any ideas? Really need my root back. Thanks
One Hype said:
Just flashed Sinless ROM and although it came with SuperSU by chainfire. I decided I wanted to remove it and install superuser by clockworkmod instead. For some reason superuser app didn't actually root the system, so I attempted to uninstall it and reinstall SuperSU. This is where I'm stuck. I cannot remove superuser app no matter what I try, even deleting it with a file manager or disabling the app. Anyone have any ideas? Really need my root back. Thanks
Click to expand...
Click to collapse
If it's in /system, you need root to remove it (which you don't have). I suggest going into recovery and then flashing Superuser with the SU binaries that allows root to work.
Link to ClockworkMod's Superuser: http://download.clockworkmod.com/superuser/superuser.zip
KiraYahiroz said:
If it's in /system, you need root to remove it (which you don't have). I suggest going into recovery and then flashing Superuser with the SU binaries that allows root to work.
Link to ClockworkMod's Superuser: http://download.clockworkmod.com/superuser/superuser.zip
Click to expand...
Click to collapse
Tried this and that is what I am attempting to remove from the system to no avail. Anything else I can try? I don't know why it won't give superuser access either.
One Hype said:
Tried this and that is what I am attempting to remove from the system to no avail. Anything else I can try? I don't know why it won't give superuser access either.
Click to expand...
Click to collapse
So flashing that zip didn't flash the SU binaries either?
Try flashing this then: http://download.chainfire.eu/382/SuperSU/UPDATE-SuperSU-v1.93.zip
The main important thing is to get the SU binaries installed to allow the superuser apps to work. Once you have that installed try to change superuser apps again (do not choose the full remove option as that will also remove the SU binaries).
Another option is to try flash the ROM again.
KiraYahiroz said:
So flashing that zip didn't flash the SU binaries either?
Try flashing this then: http://download.chainfire.eu/382/SuperSU/UPDATE-SuperSU-v1.93.zip
The main important thing is to get the SU binaries installed to allow the superuser apps to work. Once you have that installed try to change superuser apps again (do not choose the full remove option as that will also remove the SU binaries).
Another option is to try flash the ROM again.
Click to expand...
Click to collapse
Just did this buy with v.1.8 of SuperSU and everything worked perfect. Thank you
I have had my fair share of problems modifying android before but I have never had a phone flat out lie to me and say an operation was successful and actually nothing happened at all.
Have had my nexus 6 for a year or so now. Have had minor issues rooting / modifying marshmallow in the past but I figured out it was all caused by the system partition having basically 0 free space. Made a huge mistake and installed to the latest 7.0 OTA. Wanted to simply enable tethering and edit the thermal config to not shut cores down. Should be as simple as pulling the files, editing them, pushing them back to the phone in twrp with the system partition mounted and thats the end of it right? Wrong.
First of all twrp 3.0.2 refuses to let me touch the system partition without some giant prompt about how its going to make itself stick and offer to root the phone. Simple enough I have seen it in previous versions I say yes as usual except twrp proceedes to immediately spew a bunch of superuser files that do nothing throughout the system partition without asking me if I want root. Dumb but whatever. I mount /system as read write and I go edit and replace my two files like usual (build.prop and thermal config). No matter if I ADB push or use twrps built in file manager it claims the file replacement is successful. Reboot into android and not only have both files not been touched (Verified by adb pull) but the recovery gets overwritten with the factory recovery anyways. (NEVER had issues with twrp sticking on marshmallow. Now after every reboot it gets wiped out)
Second of all if I select yes to twrp mounting system as writable and it does its spewing as I mentioned before then installing SuperSU instantly causes the phone to not boot. Rewrite the boot.img to factory and it boots fine OR Rewrite the clean factory system image and the SuperSU boot works fine. But modifying /system with twrp and then running supersu at the same time is a no go. TWRP is obviously doing something stupid to system that pisses off supersu so undoing twrps mess or uninstalling supersu makes it bootable again.
I dont even want root! Everyone is claiming you need to run "settings put global tether_dun_required 0" as root along with adding the usual "net.tethering.noprovisioning=true" in the build.prop to get native tethering working again! On 6.X only the build.prop edit was needed to get it working.
So long story short. I just want native tethering to work and to tweak my /system/etc/thermal-engine-shamu.conf . Is there anyone here who has done this successfully on nougat? I feel like its all twrps fault but im far too tired and frustrated to try another version tonight.
You must be running an old version of TWRP. Update to the latest, as the latest no longer offers to root your device for you. The version of superuser included was ancient and caused the device to bootloop.
As to TWRP being overwritten Android 7.0 I believe does that on a stock system. If I recall, there is a script that needs to be modified to prevent it.
Strephon Alkhalikoi said:
You must be running an old version of TWRP. Update to the latest, as the latest no longer offers to root your device for you. The version of superuser included was ancient and caused the device to bootloop.
As to TWRP being overwritten Android 7.0 I believe does that on a stock system. If I recall, there is a script that needs to be modified to prevent it.
Click to expand...
Click to collapse
It's stated in the op he's using twrp 3.0.2.
Didgeridoohan said:
It's stated in the op he's using twrp 3.0.2.
Click to expand...
Click to collapse
I misread his post then. I wonder if perhaps he is running TWRP via fastboot instead of installing it.
Flashing recovery using "fastboot flash recovery XXX.img"
I've been all over the OP3T forums looking for current information about the correct versions of TWRP and (Magisk or SuperSU) to use with stock OOS 4.1.6. I kept my old TWRP 3.0.4-1 and when I tried to apply SuperSU 2.79 SR3 I got an unusable system and had to restore from nandroid backup. I updated to TWRP 3.1.1-2 as per the Official TWRP app and now every time I try to reboot to system from TWRP it warns "No OS installed", but the reboot works fine. I have Magisk 13.2 ready to install but I'm reluctant until I know I have the right combination - the TWRP 3.1.1-2 backup is missing some partitions and I want to make sure I can at least recover my system if Magisk screws things up.
I've been all over the forums and all the relevant threads were closed months ago, or are written about OOS 4.0.3 or 4.1.1, or describes some hideous way someone turned their 3T into a pile of molten lava. Is there any current information about what combination of TWRP and a root zip will work with the latest OOS 4.1.6? Everything is stock except the unlocked bootloader. I don't want to flash a different ROM, I don't care about passing SafetyNet, I just want to root and go on with my life.
A couple of numbers is all I ask. I can't be the only one. Please - I've been without root for a week and it's bugging me.
TWRP 3.1.1-2 has got at least one major bug where it reports the OP3T as a OP3. That'll mess up your OP3T specific installations... Don't know if there are any other bugs, since I'm staying on 3.1.1-0 until they fix that bug. You also have the option of using blu_spark's TWRP. I've never tried it, but many users swears by it.
What works for me:
OOS 4.1.6
Franco Kernel r25
TWRP 3.1.1-0 (official)
Magisk v13.2
Magisk Manager 5.0.6
No issues whatsoever (for me)...
Thanks for that. I'd rather not change kernels, though. How likely is it that the same combination works with the stock kernel? Does anyone have that running?
OK, I tried it. Swiped the Magisk 13.2 zipfile in TWRP. The script ran partway through and then said "Can't mount system" in red letters. Now the phone boots into OOS, Magisk Manager is there and says "Rooted but no root permissions, not allowed?" It has reported several times that it needs to update, to the same version of Magisk and Manager that are already there. I allowed it to go through the cycle and reboot, with no change to behavior. When I try to run an app that needs root I get the permissions screen, but when I grant I get the dialog that says "Rooted Android required" - Either the su binary could not be found or you did not allow root permission..."
So, the phone works fine but unprivileged as before. I'd like to try clearing the cache, but since TWRP still reports no OS found (3.1.1-0 does this, just like -2) I don't really want to write into a system the recovery can't see. Besides, the existence of the su binary doesn't seem like something a cache clear will fix.
Advice?
OK, I tried it. Swiped the Magisk 13.2 zipfile in TWRP. The script ran partway through and then said "Can't mount system" in red letters. Now the phone boots into OOS, Magisk Manager is there and says "Rooted but no root permissions, not allowed?" It has reported several times that it needs to update, to the same version of Magisk and Manager that are already there. I allowed it to go through the cycle and reboot, with no change to behavior. When I try to run an app that needs root I get the permissions screen, but when I grant I get the dialog that says "Rooted Android required" - Either the su binary could not be found or you did not allow root permission..."
So, the phone works fine but unprivileged as before. I'd like to try clearing the cache, but since TWRP still reports no OS found (3.1.1-0 does this, just like -2) I don't really want to write into a system the recovery can't see. Besides, the existence of the su binary doesn't seem like something a cache clear will fix.
Advice?
Scratch that request. Things seem to be turning around - su works in terminal emulator, lets me ls privileged directories like /data. Root Explorer is working again. The only thing that isn't is AdAway, which can't write the hosts file. Otherwise the system seems to be rooted and working OK.
I'm still nervous that TWRP can't see that there's an OS on the phone, and I haven't seen any other reports of this.
It looks like Magisk can't mount /system read-write. Adaway won't install, and neither will Busybox. Titanium Backup also reports problems. I tried installing Busybox and the installation failed when it tried to remount system /rw.
Will look for solutions to this problem and report back here.
I've found many solutions to this problem, like installing busybox (Stericson Busybox apparently doesn't work in OOS 4.1.6, tried two others. Problem is, busybox will only install into a partition on /system, which requires that /system be read/write.
When I have issues with mounting system or anything like that, I go mount system myself in TWRP and it usually starts working after I reboot....I don't know why, it just works for me....if I see that error, that's the first place I go, everytime...
JMB2K said:
When I have issues with mounting system or anything like that, I go mount system myself in TWRP and it usually starts working after I reboot....I don't know why, it just works for me....if I see that error, that's the first place I go, everytime...
Click to expand...
Click to collapse
That won't work either. When I go to the Mount page in TWRP I can't get the checkbox next to /system to check. It just stays empty.
mobilityguy said:
That won't work either. When I go to the Mount page in TWRP I can't get the checkbox next to /system to check. It just stays empty.
Click to expand...
Click to collapse
I seem to remember having that problem once before.... Can't recall what I did, I think it involved something with the terminal... I'm not at my desk right now, I'll look into it shortly and see if I can remember
Problem solved. The more I looked at the symptoms, the more I realized that the OTA I took after unrooting with SuperSU corrupted the system partition somehow. The first time I tried applying the OTA with the stock recovery it failed, but I was able to reboot and apply 4.1.6. That's when the trouble began - I was unable to reapply SuperSU. Fortunately I had done a nandroid backup between the upgrade and the attempt to re-root, and after the SuperSU script failed I was able to restore the backup (made and restored using TWRP 3.0.4-1) and continue working. It was either at that point or earlier, during the OTA itself, that /system was damaged - not badly enough to prevent the phone from working perfectly well, but enough to keep TWRP from mounting /system read/write. From that point on I was doomed. None of my other attempts to fix the problem had a chance as long as TWRP was restricted to mounting /system read-only. Then it got worse.
After a semi-failed attempt to install Magisk (rooted applications worked as long as they didn't try writing to /system) I restored my pre-root 4.1.6 backup one more time. After that, TWRP wouldn't mount /system at all, which prevented me from making any more nandroid backups.
It was time to act. I could keep using the phone unrooted, but the longer I went on the more work would be required to put things completely right. The risk would increase because I couldn't take any more snapshots of the phone to fall back to if I munged the device again. I also had a positive reason to fix things - during the two days the phone was rooted but couldn't access /system, Titanium Backup kicked in and did a full backup of all my software and settings.
With a damaged file system and full backups, there was no reason for halfway measures. I copied all my user data off the phone and used LloydSmallwood's unbrick tool to flash the phone back to its original OOS 3.5.4 state. That took care of rebuilding all file structures. As soon as I rebooted, OOS upgraded to 4.1.6 in one step, taking care of the system upgrade. Unlocked the bootloader, installed TWRP 3.1.1-0 (not 3.1.1-2, which has a serious bug for the 3T as someone posted above). I was able to mount and unmount /system from TWRP's mount screen, no problem. Ran Magisk 13.3 script without a problem, installed Titanium Backup, and tested an app restore. No problem. I'm now in the midst of copying all my stuff back onto the phone, after which I'll restore all missing apps and be back in business (I hope).
It's possible I could have done something tricky like reformatting /system and restoring the partition from my last good nandroid backup. But I always would have been concerned that problems would have popped up later, maybe during the Android O upgrade, when it would be way too late to recover my then-current setup. After seeing virtually every combination of working and non-working features, it just made sense to build from a clean system.
So thanks have been given to LloydSmallwood for his absolutely indispensable unbrick tool (this is the second time it has saved my phone). I should also thank my Galaxy S3, running the current build of LineageOS, which has gotten me through the two days it took to set my OnePlus straight. The Galaxy has performed better than a five year old phone running brand-new software should ever be expected to - if it supported LTE I could consider using it as a daily driver. This has been an education, and a reminder of how important it is to keep good backups at every step throughout an upgrade - and routinely during production use.
Thanks to all who gave advice in this thread.
Hi,
I own a Pixel XL 128GB, running 8.0.0 October FW. I have installed Magisk 14.3 beta 1437. Almost everything works, except for:
1. When installing Magisk using Magisk's internal installer it always downloads MAgisk 14.0 and tries to install this old, outdated version. Is this a bug?
2. I can't install OTAs, tried following john's installing instructions...
https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
My steps were:
* Install stock boot loader - Magisk almost immediately confirms that it has installed the stock boot image. That's a bit surprising, I don't see any flashing dialog like when installing Magisk. Bug?
* trying to update using the internal OTA fails. It takes very long and suddenly stops.
Any idea what went wrong?
niko26 said:
Hi,
I own a Pixel XL 128GB, running 8.0.0 October FW. I have installed Magisk 14.3 beta 1437. Almost everything works, except for:
1. When installing Magisk using Magisk's internal installer it always downloads MAgisk 14.0 and tries to install this old, outdated version. Is this a bug?
2. I can't install OTAs, tried following john's installing instructions...
https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
My steps were:
* Install stock boot loader - Magisk almost immediately confirms that it has installed the stock boot image. That's a bit surprising, I don't see any flashing dialog like when installing Magisk. Bug?
* trying to update using the internal OTA fails. It takes very long and suddenly stops.
Any idea what went wrong?
Click to expand...
Click to collapse
1. If you wan't the current beta to install, you need to change to the beta update channel in the Manager settings.
2. You've probably done something that messes with important partitions (/system, /vendor, etc). It's enough to just mount the partition rw to destroy the ability to update through OTA.
Restoring the stock boot image through the Manager is instantaneous...
Hi @Didgeridoohan,
thank you very much for the quick answers!
Didgeridoohan said:
1. If you wan't the current beta to install, you need to change to the beta update channel in the Manager settings.
Click to expand...
Click to collapse
Thanks - I didn't know that.
2. You've probably done something that messes with important partitions (/system, /vendor, etc). It's enough to just mount the partition rw to destroy the ability to update through OTA.
Click to expand...
Click to collapse
Hm, how do I find out what has been messed on /system, and/or /vendor?
Does installing and using AdAway tamper with /system or /vendor?
So reflashing the stock boot image is not sufficent, correct?
And most important.. how do I fix this?
niko26 said:
Hi @Didgeridoohan,
thank you very much for the quick answers!
Thanks - I didn't know that.
Hm, how do I find out what has been messed on /system, and/or /vendor?
Does installing and using AdAway tamper with /system or /vendor?
So reflashing the stock boot image is not sufficent, correct?
And most important.. how do I fix this?
Click to expand...
Click to collapse
If you let AdAway directly write to /system/etc/hosts, then yes, you have a compromised system partition. If you're using Magisk Systemless Hosts you should be fine though. Do you have TWRP installed? That'd be an issue as well...
If you want to make sure that you can update through OTA in the future, clean flash a factory image (you can leave data intact) and then make sure not to touch /system or /vendor at all.
* DELETED *
Didgeridoohan said:
If you let AdAway directly write to /system/etc/hosts, then yes, you have a compromised system partition. If you're using Magisk Systemless Hosts you should be fine though.
Click to expand...
Click to collapse
Yeah, I've been using Magisk's systemless hosts-file.
. Do you have TWRP installed? That'd be an issue as well...
Click to expand...
Click to collapse
TWRP has not been installed permanently.
If you want to make sure that you can update through OTA in the future, clean flash a factory image (you can leave data intact) and then make sure not to touch /system or /vendor at all.
Click to expand...
Click to collapse
There aren't a lot of apps I am granting root. One of them is Titanium Backup. It may have tampered the fs.
Is there any kind of diff against the original folders which I can run to find out what has been tampered to possibly identify which app is causing the issues?
One of the main reasons for installing Magisk was because I was tired of flashing the entire system when updates have been released.
I never couldn't get Flashfire working properly when it comes to install updates / OTAs.
niko26 said:
Yeah, I've been using Magisk's systemless hosts-file.
TWRP has not been installed permanently.
There aren't a lot of apps I am granting root. One of them is Titanium Backup. It may have tampered the fs.
Is there any kind of diff against the original folders which I can run to find out what has been tampered to possibly identify which app is causing the issues?
One of the main reasons for installing Magisk was because I was tired of flashing the entire system when updates have been released.
I never couldn't get Flashfire working properly when it comes to install updates / OTAs.
Click to expand...
Click to collapse
Since the OTA can check for a tampered system, I'm sure there's a way to check. Question is if it's worth the effort.
Any app that has root access can be the culprit... Could also be that you let TWRP mount system rw or something similar. Really hard to say...
Didgeridoohan said:
Since the OTA can check for a tampered system, I'm sure there's a way to check. Question is if it's worth the effort.
Any app that has root access can be the culprit... Could also be that you let TWRP mount system rw or something similar. Really hard to say...
Click to expand...
Click to collapse
Does TWRP mount system as rw by default? Because all I really do is.. boot to TWRP, flash the Magisk's zip. That's it. Nothing else.
Is there any other way I can install OTAs without using a computer with USB (and keeping root of course )?
As said... I never could FlashFire to work correctly. The documentation leaves a lot of questions open - BTW.. props to the Magisk's docs - much better.
niko26 said:
Does TWRP mount system as rw by default? Because all I really do is.. boot to TWRP, flash the Magisk's zip. That's it. Nothing else.
Is there any other way I can install OTAs without using a computer with USB (and keeping root of course )?
As said... I never could FlashFire to work correctly. The documentation leaves a lot of questions open - BTW.. props to the Magisk's docs - much better.
Click to expand...
Click to collapse
TWRP doesn't mount system as rw unless you let it.
I've never used Flashfire and haven't updated through OTA since, 2014-ish. :laugh: I'm mainly going on theoretical knowledge here... On my Nexus I used fastboot to flash the factory image (until I switched to ROM flashing in TWRP) and now I just flash the full update package that OnePlus provides in TWRP.
For a while there I also flashed the system.img and boot.img files in TWRP. If that months security update only had anything to do with those files it was just a matter of downloading the factory image and unpack those two files and flash them directly in TWRP. No computer needed (unless there was an update to the bootloader and/or radio). No idea if this is viable on a Pixel...
My main use for Magisk is that all my system modifications are still there after I update my phone. Drastically cuts down on the time it takes to set my phone up after an update.
Didgeridoohan said:
I've never used Flashfire and haven't updated through OTA since, 2014-ish. :laugh: I'm mainly going on theoretical knowledge here... On my Nexus I used fastboot to flash the factory image (until I switched to ROM flashing in TWRP) and now I just flash the full update package that OnePlus provides in TWRP.
Click to expand...
Click to collapse
I've tried installing TWRP permanently, but the moment I have installed an official patch, it got wiped - and I haven't found any docs how to prevent that.
My main use for Magisk is that all my system modifications are still there after I update my phone. Drastically cuts down on the time it takes to set my phone up after an update.
Click to expand...
Click to collapse
What settings are you referring to?
niko26 said:
I've tried installing TWRP permanently, but the moment I have installed an official patch, it got wiped - and I haven't found any docs how to prevent that.
Click to expand...
Click to collapse
After updating, you probably need to boot straight to TWRP and reflash root. If you boot directly to the OS, it'll automatically replace TWRP with the stock recovery.
What settings are you referring to?
Click to expand...
Click to collapse
I like to change screen density, debloat system apps, install Viper4Android, install boot scripts (LiveBoot, etc) and a bunch of other things. With Magisk, as long as I don't wipe /data, all of that will still be intact after a system update. And even if I wipe data I can restore a backup of the Magisk image or just flash the module zips in TWRP. Takes seconds rather than half an hour like it could prior to Magisk.
Didgeridoohan said:
After updating, you probably need to boot straight to TWRP and reflash root. If you boot directly to the OS, it'll automatically replace TWRP with the stock recovery.
Click to expand...
Click to collapse
Well, TWRP is gone after an update - I can't boot into it.
[/quote]I like to change screen density, debloat system apps, install Viper4Android, install boot scripts (LiveBoot, etc) and a bunch of other things. With Magisk, as long as I don't wipe /data, all of that will still be intact after a system update. And even if I wipe data I can restore a backup of the Magisk image or just flash the module zips in TWRP. Takes seconds rather than half an hour like it could prior to Magisk.[/QUOTE]
Hm, I am not sure if I get you right. If it is about apps, I use Titanium Backup to recover my old apps+settings.
system files
Most of the setting you mentioned are messing with the system files. "debloating" or removing and system applications with titanium backup will fail a system check with OTA update. You can freeze the apps i believe.
I changing the screen density and boot scripts. These are all system files locations.
I have had an ota work be re-installing the system apps from titanium backup and reverting all the other changes when it was failing before. Think this was back on android 6.0 though.
Didgeridoohan said:
After updating, you probably need to boot straight to TWRP and reflash root. If you boot directly to the OS, it'll automatically replace TWRP with the stock recovery.
I like to change screen density, debloat system apps, install Viper4Android, install boot scripts (LiveBoot, etc) and a bunch of other things. With Magisk, as long as I don't wipe /data, all of that will still be intact after a system update. And even if I wipe data I can restore a backup of the Magisk image or just flash the module zips in TWRP. Takes seconds rather than half an hour like it could prior to Magisk.
Click to expand...
Click to collapse
automattic said:
Most of the setting you mentioned are messing with the system files. "debloating" or removing and system applications with titanium backup will fail a system check with OTA update. You can freeze the apps i believe.
I changing the screen density and boot scripts. These are all system files locations.
I have had an ota work be re-installing the system apps from titanium backup and reverting all the other changes when it was failing before. Think this was back on android 6.0 though.
Click to expand...
Click to collapse
Since all of the things I mentioned are done with Magisk, none of them will cause an OTA to fail...
Reinstalling system apps will not work, since nowadays an OTA will fail just by mounting /system as rw.
Hi guys, trying to install latest OTA patch for Pixel 2. I am assuming process would be the same. I tried to follow the guide but hit the bump immediately. I can't see "Restore Stock Boot" when pressing uninstall. But there is restore images option. Hitting it does nothing, I receive the message that there are no backups. Where does the backup go so I can put the original file for it to be reinstalled?
Hello, so i did something to my magisk manager, i was trying to get google pay to work at wich point i have now given up, i had magisk repackaged before, so i i stalled busy box module and then i disabled it thinking maybe that if i did that i would be able to use google pay it didnt work so i rebooted everything seemed fine until i could no longer open magisk, the app freezes on the mask/logo and thats it, i had it repackaged as manager but i uninstalled it and re installed it as magisk manager thinking that may help but it didnt. I also can not grant root acess even though it says its been granted it just keeps asking me over and over.
Delta wolf said:
Hello, so i did something to my magisk manager, i was trying to get google pay to work at wich point i have now given up, i had magisk repackaged before, so i i stalled busy box module and then i disabled it thinking maybe that if i did that i would be able to use google pay it didnt work so i rebooted everything seemed fine until i could no longer open magisk, the app freezes on the mask/logo and thats it, i had it repackaged as manager but i uninstalled it and re installed it as magisk manager thinking that may help but it didnt. I also can not grant root acess even though it says its been granted it just keeps asking me over and over.
Click to expand...
Click to collapse
Uninstall magisk and repatch your boot image if that doesn't work you have to reflash your boot image and then patch the new boot image..... Now if you have a encrypted internal storage reflashkng the boot image going to bring back your encryption and you won't be able to use twrp properly and only way to fix that would be to fix decrypt zip for your device but to do that properly you have to be able to mount data in twrp to flash that zip and only way to mount data would be to format data and then you be able to click on data to flash your zip to decrypt and then flash magisk it's alot if simply un installing magisk and repatchin doesn't work for you
[emoji3436]I Willl Scarfice For Those That I Love [emoji3434]
PoochyX said:
Uninstall magisk and repatch your boot image if that doesn't work you have to reflash your boot image and then patch the new boot image..... Now if you have a encrypted internal storage reflashkng the boot image going to bring back your encryption and you won't be able to use twrp properly and only way to fix that would be to fix decrypt zip for your device but to do that properly you have to be able to mount data in twrp to flash that zip and only way to mount data would be to format data and then you be able to click on data to flash your zip to decrypt and then flash magisk it's alot if simply un installing magisk and repatchin doesn't work for you
[emoji3436]I Willl Scarfice For Those That I Love [emoji3434]
Click to expand...
Click to collapse
So if i read this correctly (im on a one plus 6 so i have my data accesable etc) i need to uninstall magisk manager, reboot twrp, uninstall magisk, re install magisk,