No more development from me.
XDA:DevDB Information
TWRP for the Hauwei P9 Lite, Tool/Utility for the Huawei P9 Lite
Contributors
Meticulus
Source Code: https://github.com/Meticulus
Version Information
Status: Beta
Created 2016-11-01
Last Updated 2018-01-18
Installed using my old TWRP, I can confirm that its working properly on my Huawei P9 Lite
So that means when we are using CM13, we can revent back to stock by just restoring our nandroid backup?
Works fine, but you made a mistake in assert lines il your CM13 updater script, you wrote hi2650 instead of hi6250 haha
installed and perfect, thanks
Johnny TDN said:
So that means when we are using CM13, we can revent back to stock by just restoring our nandroid backup?
Click to expand...
Click to collapse
Not quite... Please see FAQ on download page...
enzo24754 said:
Works fine, but you made a mistake in assert lines il your CM13 updater script, you wrote hi2650 instead of hi6250 haha
Click to expand...
Click to collapse
Really... I thought I had that fixed... [emoji6]
So can use this twrp to flash cyanogenmod? And flash stock? Thanks in advance.
Edit: already know it
finely the error 255 is gone , i manage to make a backup , thanks
Link offline
Please, can someone share the file, the download link is offline.
Thank you in advance.
tonioricciato said:
Please, can someone share the file, the download link is offline.
Thank you in advance.
Click to expand...
Click to collapse
The link isn't offline.
Sent from my P9-Lite using Tapatalk
tonioricciato said:
Please, can someone share the file, the download link is offline.
Thank you in advance.
Click to expand...
Click to collapse
Incorrect: tested working...
Meticulus said:
Incorrect: tested working...
Click to expand...
Click to collapse
Hi,
using the dns of google (8.8.8.8/8.8.4.4) the site is unreachable.
Solved thank to opendns.
Hey Meticulus. When I was going to flash your CM, firstly I wiped all the partitions including system. Then I thought maybe restarting the recovery may be good idea. Afterwards the recovery could not boot and the screen was flickering. After some time I figured out that the chinese TWRP worked. So if there is no system installed the recovery couldn't tell if there is stock or CM installed and so it did nothing. Could you look into that? Maybe I am wrong. Thanks.
twrp no full support selinux. how to fix? I'm on stock
Have Problem with
Slect Storage
Micro SD card (0 mb) can't select.
Is with offical twrp same
[EDIT]
Okay i have fixed.
SD card formatted with phone
I cant mount /data partition on stock rom (red recovery).
adek350 said:
I cant mount /data partition on stock rom (red recovery).
Click to expand...
Click to collapse
Did you restore a back up while on CM without restoring the "dump"?
Meticulus said:
Did you restore a back up while on CM without restoring the "dump"?
Click to expand...
Click to collapse
Yes, what do I do now?
adek350 said:
Yes, what do I do now?
Click to expand...
Click to collapse
If you did a dump and have the files then restore the dump ( follow on screen instruction at the end ) and the restore your back up again. If you do not have a dump then you'll need to go through the process of restoring a stock ROM. To be honest, I've never flash a stock ROM but there should be plenty of info around here about how to do it, and plenty of people willing to help you with it.
Related
i have deleted my OS and now im stuck with cynemod(witch i hate) can anyone post a link for images when avaiable or extract a system.img from the phone.
Many thanks
decisionif it will work in other devices.
it seems it might take a while until ROMs are available so i decided to send my phone to HTC to put the system back on.
Ill do a TWRP backup first thing and share but not sure it will work in other devices.
If anybody knows out to extract the ROM, please post it here.
thank you
I have posted a complete mini 2 system dump here in another thread, if it helps
http://forum.xda-developers.com/one-mini-2/help/request-dump-t2808555
gibihr said:
I have posted a complete mini 2 system dump here in another thread, if it helps
http://forum.xda-developers.com/one-mini-2/help/request-dump-t2808555
Click to expand...
Click to collapse
yeah i saw that and got the dump but i cannot compile for a rom.
Yeah, it bad when this happens.. Been there, done that.. Currently waiting for RUU because in Croatia service they still don't have new version.. So i wait and wait... Will try again in a few days.
Finnaly
OK so i finally got my phone from HTC and here is the TWRP from original Stock.
My CID is HTC_UK001
Not sure if it work on others but just try.
Just unpack>send to phone or memory card and restore backup using TWRP
[URL="https://mega.nz/#!H8MhFLLY!WF5r4CwkXOg3Xda1YP_ESAKRNeY7AC5jkA_tIW65PwU[/URL]
Hope it helps
BTW inside the backup theres a image file. Wondering if we can change the file name to .IMG and flash
kativiti said:
OK so i finally got my phone from HTC and here is the TWRP from original Stock.
My CID is HTC_UK001
Not sure if it work on others but just try.
Just unpack>send to phone or memory card and restore backup using TWRP
https://mega.co.nz/#!msthgIJB!WF5r4CwkXOg3Xda1YP_ESAKRNeY7AC5jkA_tIW65PwU
Hope it helps
BTW inside the backup theres a image file. Wondering if we can change the file name to .IMG and flash
Click to expand...
Click to collapse
Great man, it worked on my HTC_032. Thanks!!
mad_wings said:
Great man, it worked on my HTC_032. Thanks!!
Click to expand...
Click to collapse
That sounds great guys.
How about a quick "how-to" for the rest of us. TWRP, root etc. if used, or at least how you went about flashing the stock ?
dbxoneA said:
That sounds great guys.
How about a quick "how-to" for the rest of us. TWRP, root etc. if used, or at least how you went about flashing the stock ?
Click to expand...
Click to collapse
just search in the forum you'll find loads of tutorial in how to do it.
Install TWRP
download file from link above
send to phone via sd card or TWRP adb push (google it)
use twrp to install from backup.
Need more help? come back and we'll try again.
kativiti said:
just search in the forum you'll find loads of tutorial in how to do it.
Install TWRP
download file from link above
send to phone via sd card or TWRP adb push (google it)
use twrp to install from backup.
Need more help? come back and we'll try again.
Click to expand...
Click to collapse
Good stuff, thanks mate.
Tried it, works great!
kativiti said:
OK so i finally got my phone from HTC and here is the TWRP from original Stock.
My CID is HTC_UK001
Not sure if it work on others but just try.
Just unpack>send to phone or memory card and restore backup using TWRP
https://mega.co.nz/#!msthgIJB!WF5r4CwkXOg3Xda1YP_ESAKRNeY7AC5jkA_tIW65PwU
Hope it helps
BTW inside the backup theres a image file. Wondering if we can change the file name to .IMG and flash
Click to expand...
Click to collapse
sorry for noob question, can you tell me about its version and other details?
nsnobel2 said:
sorry for noob question, can you tell me about its version and other details?
Click to expand...
Click to collapse
there you go bud
kativiti said:
there you go bud
Click to expand...
Click to collapse
But it could not remove demo video from phone, its not live demo unit, its working phone but htc add this **** in phone, any idea to remove this?
nsnobel2 said:
But it could not remove demo video from phone, its not live demo unit, its working phone but htc add this **** in phone, any idea to remove this?
Click to expand...
Click to collapse
are you using my backup? thats weird. The backup its from retail and nobody else complain. try Wipe data & factory reset.
kativiti said:
are you using my backup? thats weird. The backup its from retail and nobody else complain. try Wipe data & factory reset.
Click to expand...
Click to collapse
My phone is also retail and already have demo on it before using your backup but unfortunately your backup could not delete that aap , Wipe data & factory reset is also not helpful ,
Any other suggestion?
nsnobel2 said:
My phone is also retail and already have demo on it before using your backup but unfortunately your backup could not delete that aap , Wipe data & factory reset is also not helpful ,
Any other suggestion?
Click to expand...
Click to collapse
according to a search in Google its not possible to be retail and have a demo because its 2 different ROMS.
you can use TWRP to wipe everything Data, Dalvik and System.
Then use the backup.
This are tips so please use at your own risk.
kativiti said:
according to a search in Google its not possible to be retail and have a demo because its 2 different ROMS.
you can use TWRP to wipe everything Data, Dalvik and System.
Then use the backup.
This are tips so please use at your own risk.
Click to expand...
Click to collapse
I can use sim on it, believe me its a retail phone with demo app, I did wipe everything Data, Dalvik and System and restore your backup but same result,
nsnobel2 said:
I can use sim on it, believe me its a retail phone with demo app, I did wipe everything Data, Dalvik and System and restore your backup but same result,
Click to expand...
Click to collapse
dont know what to say to that, however, you can try this:
http://repo.xposed.info/
install framework (use flash mode) and look for module BootManager. You can choose witch apps will run at system start. Disable demo app.
Make sure you follow all instructions and good luck.
let us know how it goes.
kativiti said:
there you go bud
Click to expand...
Click to collapse
I can't restore that backup. Have other suggestion.
nasirum said:
I can't restore that backup. Have other suggestion.
Click to expand...
Click to collapse
theres nothing else at the moment. why cant you restore?
Hey guys, I was playing around with the leeco s3 and I think I over flashed something or other. It's not exactly working right. Can someone please upload a complete btwrp backup of their le s3 x522 on 18s, 19s or 20s?
Thanks in advance!
Rico
iamrico00 said:
Hey guys, I was playing around with the leeco s3 and I think I over flashed something or other. It's not exactly working right. Can someone please upload a complete btwrp backup of their le s3 x522 on 18s, 19s or 20s?
Thanks in advance!
Rico
Click to expand...
Click to collapse
I think you need to start reading some threads around here, once you have installed the TWRP for the S3, you cannot get OTA to work again and their are other numerous issues too, as of yet nobody can fully restore back to stock. So start reading.
Also a few people here do have flashable firmware that might help but it will never be a full stock recovery unless something is fixed.
Charles Broccoli said:
I think you need to start reading some threads around here, once you have installed the TWRP for the S3, you cannot get OTA to work again and their are other numerous issues too, as of yet nobody can fully restore back to stock. So start reading.
Also a few people here do have flashable firmware that might help but it will never be a full stock recovery unless something is fixed.
Click to expand...
Click to collapse
I think you need to CAREFULLY read this thread before thinking of writing something.
I did not ask for OTA updates. I did not ask for stock. I asked for a functioning TWRP backup of the Le S3. Thats it.
Rico
Please play nice ppl
Deleted
iamrico00 said:
Hey guys, I was playing around with the leeco s3 and I think I over flashed something or other. It's not exactly working right. Can someone please upload a complete btwrp backup of their le s3 x522 on 18s, 19s or 20s?
Thanks in advance!
Rico
Click to expand...
Click to collapse
take a look in this thread, you will find a link..i think page 3/4 Extreme99 wrote some dirctions...it has a link to his twrp 19s backup which i know works
Need x522 stock .019s rom. Lost IMEI, baseband, etc.
britdude said:
take a look in this thread, you will find a link..i think page 3/4 Extreme99 wrote some dirctions...it has a link to his twrp 19s backup which i know works
Need x522 stock .019s rom. Lost IMEI, baseband, etc.
Click to expand...
Click to collapse
Thanks, Ive seen this post as well, it is 19s but is the boot partition (i think) and data partition, no recovery or system partition.
I was curious if anyone had a complete backup of working system, recovery, boot, data partitions for restoring?
Also I get this odd error 7 when trying to restore it, anyone know what is going on?
Thanks
Rico
iamrico00 said:
Thanks, Ive seen this post as well, it is 19s but is the boot partition (i think) and data partition, no recovery or system partition.
I was curious if anyone had a complete backup of working system, recovery, boot, data partitions for restoring?
Also I get this odd error 7 when trying to restore it, anyone know what is going on?
Thanks
Rico
Click to expand...
Click to collapse
the post i sent you too, and the twrp back up in there at step 6 is all you need to restore your system to 19s..
it will not give you an error, but make sure you are using the chinese twrp
the error is what you are getting trying to flash the OTA thru twrp...dont worry about it as the OTA's will not install
Official twrp work too... Just ota fuxed
---------- Post added at 06:04 PM ---------- Previous post was at 05:43 PM ----------
Also i noticed for le s3, the update is 5.8.020s instead of the 5.9.020s that's available for the chinese le 2
britdude said:
the post i sent you too, and the twrp back up in there at step 6 is all you need to restore your system to 19s..
it will not give you an error, but make sure you are using the chinese twrp
the error is what you are getting trying to flash the OTA thru twrp...dont worry about it as the OTA's will not install
Click to expand...
Click to collapse
Thanks, I thats one I tried, I get the OS and it boots ok. Phones ok, but bluetooth and wifi cashes a crash.
Any ideas?
Thanks
Rico
iamrico00 said:
Thanks, I thats one I tried, I get the OS and it boots ok. Phones ok, but bluetooth and wifi cashes a crash.
Any ideas?
Thanks
Rico
Click to expand...
Click to collapse
I've used that twrp baclup numerous times without a problem.....
i would suggest, going back to twrp, and erase data, then restore again and see what happens
Good news guys! I was able to get the official le s3 from leeco directly!! I will upload it soon, it is 5.8.020s.
xterminater07 said:
Good news guys! I was able to get the official le s3 from leeco directly!! I will upload it soon, it is 5.8.020s.
Click to expand...
Click to collapse
Full? How can we flash it?
Posted using a calculator and delayed by AT&T.
jose makalolot said:
Full? How can we flash it?
Posted using a calculator and delayed by AT&T.
Click to expand...
Click to collapse
go to this link and have a look..
It's done thru TWRP
http://forum.xda-developers.com/le-2/development/le-s3-factory-image-5-8-020s-directly-t3527790
britdude said:
go to this link and have a look..
It's done thru TWRP
http://forum.xda-developers.com/le-2/development/le-s3-factory-image-5-8-020s-directly-t3527790
Click to expand...
Click to collapse
You tried that way?
Posted using a calculator and delayed by AT&T.
jose makalolot said:
You tried that way?
Posted using a calculator and delayed by AT&T.
Click to expand...
Click to collapse
yes i have tried that way, i have also tried it a diff way if you read down a few comments...
its on my phone running smooth which ever way you go...its all good
xterminator07 has worked hard at getting this full rom file for us..
please thank him
britdude said:
the post i sent you too, and the twrp back up in there at step 6 is all you need to restore your system to 19s..
it will not give you an error, but make sure you are using the chinese twrp
the error is what you are getting trying to flash the OTA thru twrp...dont worry about it as the OTA's will not install
Click to expand...
Click to collapse
Hey, do you know where I could find the Chinese TWRP that allows me to flash the original stock EUI rom? I flashed LineageOS but the camera is not perfect, so I wish to go back to EUI but I cannot figure out how to install it without seeing errors such as "this package is for "le_s2_na" devices. Your device is a "s2"." Could you point me in the right direction? Maybe a download link for the Chinese TWRP that people claim works? Thanks!
potatoalien said:
Hey, do you know where I could find the Chinese TWRP that allows me to flash the original stock EUI rom? I flashed LineageOS but the camera is not perfect, so I wish to go back to EUI but I cannot figure out how to install it without seeing errors such as "this package is for "le_s2_na" devices. Your device is a "s2"." Could you point me in the right direction? Maybe a download link for the Chinese TWRP that people claim works? Thanks!
Click to expand...
Click to collapse
You need to unzip the firmware file, remove top 2 lines from META-INF\com\google\android\updater-script and zip it again, it will remove the platform check. However device still does not boot, I tried to install both 20S and 21S multiple times. My guess is we need the original recovery partition image for X522 and I could not find it anywhere.
I resolved it. Took 2 days and dozens of flashes. As far as I can tell the key was to wipe everything - system, cache, data, internal storage, then reboot into bootloader again and into Chinese TWRP.
So the process would be:
1. power off the phone. Hold VolumeDown button and power on. It loads into bootloader.
2. fastboot oem unlock-go
3. fastboot boot twrp.img.
4. In TWRP wipe EVERYTHING
5. In TWRP reboot -> bootloader.
6. repeat 2-3.
7. On PC: adb push S2_X522-NA-OP-IFXNAOP5802102141S-5.8.021S.zip /sdcard
8. In TWRP click right button on the bottom and select English. Click "Do not allow modifications." Install the zip file you just uploaded.
9. Reboot.
virx14 said:
I resolved it. Took 2 days and dozens of flashes. As far as I can tell the key was to wipe everything - system, cache, data, internal storage, then reboot into bootloader again and into Chinese TWRP.
So the process would be:
1. power off the phone. Hold VolumeDown button and power on. It loads into bootloader.
2. fastboot oem unlock-go
3. fastboot boot twrp.img.
4. In TWRP wipe EVERYTHING
5. In TWRP reboot -> bootloader.
6. repeat 2-3.
7. On PC: adb push S2_X522-NA-OP-IFXNAOP5802102141S-5.8.021S.zip /sdcard
8. In TWRP click right button on the bottom and select English. Click "Do not allow modifications." Install the zip file you just uploaded.
9. Reboot.
Click to expand...
Click to collapse
Hmm I might try that later, but what would I do if I get the classical error ("this package is for "le_s2_na" devices")? Will that error not show up if I follow your method?
Most custom ROMs for the OnePlus 5 are now supporting encrypted devices only. However, some users choose to keep their device in a decrypted state for MultiROM support and for other reasons. If you follow the steps below, you can flash any encrypted ROM on your decrypted device (without losing data) and your device will remain decrypted! I found this information in one of the many threads I've read (I don't remember which one) and thought I'd post it here to help others and for easy reference. Enjoy!
Follow These Steps:
1. Boot into TWRP
2. Wipe caches, data, and system partitions
3. Flash encrypted ROM
4. Flash GApps
5. Flash Magisk
6. Flash no-verity-op5.zip (not created by me)
7. Reboot
8. Enjoy!
If you closely follow the instructions above, you can enjoy any ROM on your decrypted OnePlus 5 and have the best of both worlds! :highfive:
Note 1: If device gets stuck at OnePlus boot animation after following all of the steps above, hold the power button for 10 seconds to turn off device. Power the device back on and it will boot successfully into the ROM.
Note 2: Some ROMs are not compatible with MultiROM without the inclusion of additional commits by ROM developer.
After wipes, its Flash ROM.. Flash optional Kernel.. Flash Gapps.. Flash No-verity.. Flash optional root (magisk or SuperSU).. Flash optional Viper4Arise?
Is this confirmed working? Has anyone actually tried the process and confirmed that any data on the phone's internal storage is there?
Ph0enix_216 said:
Is this confirmed working? Has anyone actually tried the process and confirmed that any data on the phone's internal storage is there?
Click to expand...
Click to collapse
Tested it yesterday with aosip and all data are on internal storage. Flashed validus today without no-verity-op5.zip and it worked too. Didn't lose data on internal storage...
Gesendet von meinem ONEPLUS A5000 mit Tapatalk
Ph0enix_216 said:
Is this confirmed working? Has anyone actually tried the process and confirmed that any data on the phone's internal storage is there?
Click to expand...
Click to collapse
Yes, I have followed these steps to flash MANY encrypted ROMs on my decrypted device.
Confirmed to work successfully! :good:
Creeper36 said:
After wipes, its Flash ROM.. Flash optional Kernel.. Flash Gapps.. Flash No-verity.. Flash optional root (magisk or SuperSU).. Flash optional Viper4Arise?
Click to expand...
Click to collapse
I've found that flashing SuperSU (instead of Magisk) on encrypted ROMs often ends in a bootloop on my decrypted device. Flashing Magisk seems to be a requirement.
Not working for me. Tried with AICP release from 9/11. Wiped caches, system, data. Flashed rom. flashed gapps (tried stock/full/micro). Flashed magisk (also tried without). -> Bootloop
//edit
sorry i think i misunderstood the post. i thought i can flash decrypted roms on encrypted device xD is that possible too?
nico2195x said:
sorry i think i misunderstood the post. i thought i can flash decrypted roms on encrypted device xD is that possible too?
Click to expand...
Click to collapse
No, I believe your device must be decrypted to flash decrypted ROMs.
Thanks for this! Do you know who we should thank for the zip? If there's an original thread for it?
DunamisMaximus said:
Thanks for this! Do you know who we should thank for the zip? If there's an original thread for it?
Click to expand...
Click to collapse
You are very welcome! Unfortunately, I do not know who originally created the verity zip. It has been passed around on XDA by many people.
DunamisMaximus said:
Thanks for this! Do you know who we should thank for the zip? If there's an original thread for it?
Click to expand...
Click to collapse
sjamie said:
You are very welcome! Unfortunately, I do not know who originally created the verity zip. It has been passed around on XDA by many people.
Click to expand...
Click to collapse
The original zip was modified for making FBE optional by @snowwolf725. Click here to visit his original thread.
I have a quick question. I just unlocked the Bootloader on my Plus 5 and installed TWRP 3.1.1-1 and Magisk 14.0 on it. The firmware is 4.5.0 as I didn't let it update at all and did all this to the device upon first bootup. I did not decrypt.
I've tried installing latest RR release (final for N cheeseburger) and the install stops with errors. I tried a different rom in the same Android version (7.1.2) and get same results. MD5 checks out on both downloads.
Do I have to flash the latest OnePlus 5 update (full OTA 4.5.10) before flashing a 7.1.2 rom? And should I decrypt my device for easier flashing?
If no one answers, I completely understand and will search some more but this seems to be a cloudy subject that gets many different answers and I thought I would post it here. Thank you all in advance.
Sent from my Nexus 6 using XDA Premium HD app
shadowstep said:
The original zip was modified for making FBE optional by @snowwolf725. Click here to visit his original thread.
Click to expand...
Click to collapse
And there's a thread I started for using FDE.
It works with most ROMs...
https://forum.xda-developers.com/oneplus-5/development/op5-disk-encryption-enabler-op5-t3672477
glockman4519 said:
I have a quick question. I just unlocked the Bootloader on my Plus 5 and installed TWRP 3.1.1-1 and Magisk 14.0 on it. The firmware is 4.5.0 as I didn't let it update at all and did all this to the device upon first bootup. I did not decrypt.
I've tried installing latest RR release (final for N cheeseburger) and the install stops with errors. I tried a different rom in the same Android version (7.1.2) and get same results. MD5 checks out on both downloads.
Do I have to flash the latest OnePlus 5 update (full OTA 4.5.10) before flashing a 7.1.2 rom? And should I decrypt my device for easier flashing?
If no one answers, I completely understand and will search some more but this seems to be a cloudy subject that gets many different answers and I thought I would post it here. Thank you all in advance.
Click to expand...
Click to collapse
Yes.. U need to flash the latest firmware and then flash roms.. There's a thread for firmware.. Flash the whole zip would again give you stock recovery and you have to re do the fastboot stuff so makes no sense..
arjunarora said:
Yes.. U need to flash the latest firmware and then flash roms.. There's a thread for firmware.. Flash the whole zip would again give you stock recovery and you have to re do the fastboot stuff so makes no sense..
Click to expand...
Click to collapse
In addition to what is stated here, if you flash Magisk immediately after flashing the full firmware zip (no rebooting between steps), TWRP won't get replaced with the stock recovery. This is a great time saver!
Any method to get oxygen os as a secondary ROM with multirom?
dakotah2468 said:
Any method to get oxygen os as a secondary ROM with multirom?
Click to expand...
Click to collapse
Yes, I've read that is possible. No, I don't know how to do it. :laugh:
sjamie said:
Yes, I've read that is possible. No, I don't know how to do it. :laugh:
Click to expand...
Click to collapse
Darn, well thanks for the reply
I just wanted to thank you for this thread. All of the information you provided helped me immensely. I was struggling with this device and flashing roms at first but one I unencrypted it, with your guide, everything worked great. I was going to leave it encrypted for easier flashing since most all the roms for this device are encrypted only. But I was having more issues than ever. And many, of the posts in here have also answered quite a few questions I had. This should be a pinned tread.
Anyways thank you again. Your thread is a must read for anyone with an Opo5.
"Chance Favors the Prepared"
dakotah2468 said:
Any method to get oxygen os as a secondary ROM with multirom?
Click to expand...
Click to collapse
Have you tried flashing OxygenOS, the no-verity zip and Magisk?
glockman4519 said:
I just wanted to thank you for this thread. All of the information you provided helped me immensely. I was struggling with this device and flashing roms at first but one I unencrypted it, with your guide, everything worked great. I was going to leave it encrypted for easier flashing since most all the roms for this device are encrypted only. But I was having more issues than ever. And many, of the posts in here have also answered quite a few questions I had. This should be a pinned tread.
Anyways thank you again. Your thread is a must read for anyone with an Opo5.
"Chance Favors the Prepared"
Click to expand...
Click to collapse
Thanks for the feedback and I'm glad this thread could provide you the guidance you needed.
I have a Huawei P9 EVA-L09.
I have accidentally deleted the vendor partition during the install of a custom rom and everything went downhill from that. After that I have been trying to flash the vendor partition from stock roms and images and I have tried everything I could to restore it.
I even tried different versions of TWRP and using fastboot as well but no luck.
If there is someone that can help me with this I would appreciate it very much.
It was on C432B502 update and I was trying to install RR custom rom.
Partition table is now screwed up and it shows me only 31.92 GB available on one empty name partition named 'linux' .
Is there any way that I can fix this????? I have heard that the repair in the official huawei repair shop is about 450$ . I don't have that much.
Is there anyone available to help me with it?
Rollback to mm using dload
Twisted Prime said:
Rollback to mm using dload
Click to expand...
Click to collapse
Just so you know I have been tampering with OEMinfo and bootloaders from other stock roms so can you direct me on how to do it because whenever I tried to use the vol + and vol - with power button it would stop saying that the package installation cannot continue. And I have tried everything, is there a step by step guide on how to rollback?
Thank you in advance. I would be really thankful if I got some guide or something on how to do it because I do not know how.
If you can enter TWRP, try https://forum.xda-developers.com/hon...overy-t3769279 . Should help!
axe30 said:
If you can enter TWRP, try https://forum.xda-developers.com/hon...overy-t3769279 . Should help!
Click to expand...
Click to collapse
Hello axe30, link is broken, please post working link so I can see what you're talking about. Btw none of the partitions exist in twrp, how am I gonna flash something if there are no partitions except boot and recovery?
Thanks in advance ?
XXRAPPERXX said:
Hello axe30, link is broken, please post working link so I can see what you're talking about. Btw none of the partitions exist in twrp, how am I gonna flash something if there are no partitions except boot and recovery?
Thanks in advance
Click to expand...
Click to collapse
Sorry for broken link.
I lost my internal memory and this tool help me. Try https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279 :fingers-crossed:
axe30 said:
Sorry for broken link.
I lost my internal memory and this tool help me. Try https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279 :fingers-crossed:
Click to expand...
Click to collapse
DUDE THIS IS AMAZING. As you see in the first post the official Huawei repair store wanted to charge me about 450$ for this. Thank you man!!! A BIG THANKS FOR YOU! I'll PM you later on after I'm done setting it up. THANKS MAN! :good::good::good::good:
MOVED TO - https://forum.xda-developers.com/s7-edge/themes/roms-android-acceleration-strip-t3841643
Will stock recovery suffice for flashing or does one need custom recovery?
Edit: links not working coming up with "410 Gone"
rfrick93 said:
Will stock recovery suffice for flashing or does one need custom recovery?
Edit: links not working coming up with "410 Gone"
Click to expand...
Click to collapse
This can work with stock ROMs too but I haven't tested it so I can't guarantee it. Be sure to backup.
Error 410? I just downloaded it for me and it worked. Try refresing and redoing it again or try using a different browser
Hi,
i get error 7 in twrp... V1.2
Any help will be greatful
935F, i assume its gotta do with updater script not recognizing the model number. :good:
@soka said:
Hi,
i get error 7 in twrp... V1.2
Any help will be greatful
935F, i assume its gotta do with updater script not recognizing the model number. :good:
Click to expand...
Click to collapse
Thanks for letting me now, I'll check it over