Hello XDA Members,
I am here with my new kernel. This kernel works on Android 7.x based ROMs
Standard disclaimer :
Code:
This product is distributed free of cost and does not come with a warranty. I will not be responsible for anything that may happen to your phone as a result of flashing this kernel. You have been warned !If you come to me saying that this turned my phone into nuclear bomb , I will surely laugh at you !!!
Introduction :
Photon is a fundamental particle of nature which delivers light to us all. It's mindboggling properties like duality, never stopping from being in motion and presence in so many diverse natural phenomena like photoelectric effect, relativity etc. makes the man ultra-curious about it. A photon is born when atoms transition from excited state to ground state. What's the point of this paragraph in a kernel description post?
Well, like a photon this kernel possess duality. How? By giving better battery back up and performance. ( ) What about non-resting nature of photons? Yes, the kernel support will never stop until Nougat says good bye. ( ). OK now don't ask about analogies regarding photoelectric effect and relativity. ( : D ).
Anyways, now coming to the point I am very much glad to present you, the users of condor, my tiny piece of work for our small beast, .
“The Photon Kernel“
I got very much fascinated by the concept of photons when I studied it for the first time and hence (yes, you've guessed it right!) I've named this kernel Photon.
Enough of the physics class today let's look inside the features of the kernel now ( xD ) :
Features :
1)Compiled with UBER toolchain 4.9
2)Used -O3 and graaphite optimisation flag
3)Added few more governers to stock ones. List of all governers :
Impulse
Ondemand
Ondemandplus
Powersave
Performance
Interactive
Userspace
Smartmax
Lionheart
Nightmare
4)More I/O schedulers.List of all I/O schedulers :
noop
deadline
row
cfq
flops
tripndroid
sio
sioplus
vr
zen
bfq
5)Enable Arch Power
6)Disable Gentle Fair Sleepers
So that’s all for the features as of now. More features will be added in future.
This kernel serves me good for daily use and allowes me to use those governers flawlessly.
To-do list :
1)Add more governers(No more governers planned)
2)Add dt2w feature
(DT2W and intelliplug update is ready but I want everything to be nice and shining before adding them )
Downloads :
Grab your photon build here :
https://www.androidfilehost.com/?fid=457095661767122135
Credits :
@squid2
@rainforce279
flar2
Me
Installation Instructions :
1)Download latest zip from the link given
2)Make sure you are on android nougat rom
3)Reboot to twrp recovery and flash the zip(Hope you like installation script)
4)Reboot and profit
Known Issues :
None so far
If you found something ,let me know with last kmesg
If you like my work and you want me to work more on this project , please hit thanks button. It will encourage me a lot !!!
XDA:DevDB Information
Photon Kernel, Kernel for the Moto E
Contributors
ABSathe
Source Code: https://github.com/Ashutosh-01/photon_android_kernel
Kernel Special Features: Multiple custom governers,I/O schedulers
Version Information
Status: Beta
Current Beta Version: r5
Beta Release Date: 2016-11-16
Created 2016-11-02
Last Updated 2016-12-21
Special thanks to : @Vikrant Desai (For writing OP) @neonkat(For helping me )
Important Note :
Please make sure that you are on a stock kernel that comes with your ROM before flashing this.
If you flash this over another custom Kernel it may lead to unexpected issues
I personally use this on AOSP OMS rom
FAQ:
1)I find this kernel useful and want to support further development how should I do it ??
Ans- Hit the thanks button to encourage me
2)I want to suggest few changes to this kernel and want to contribute.
Ans- If you want to contribute .. feel free to create a pull request in my github
3)I want to request feature .
Ans- Ask in this thread.. if I find feature useful and logical .. I'll add it.,I would appreciate if you link me with commit. It's really hard to dig in the sources and find the exact commit.
4)I have an issue , will you help me ?
Ans- I am not any superstar kernel developer, but I will try my best to solve the issue. Here are few steps you should do before reporting issue here.First of all clean flash your ROM and then flash my kernel
If the issue still persists .. report it here with last_kmesg (can be obtained through Kernel Adiutor app)
5)Is this Kernel better than kernel A or kernel B ?
Ans- Please don't ask such questions in this thread .. if you want to use this kernel use it .. if you find issue .. report it here.
6)Which app should I use for tweaking this kernel ?
Ans- Use Kernel Adiutor app from play store
Dt2w works??
Rajendran Rasa said:
Dt2w works??
Click to expand...
Click to collapse
No it doesn't. But it might be added soon.
Dt2w is not unstable in the Moto E? If it is possible in the next versions consider adding Dt2s/S2w.
Thanks for Kernel
dVinsmoke said:
Dt2w is not unstable in the Moto E? If it is possible in the next versions consider adding Dt2s/S2w.
Thanks for Kernel
Click to expand...
Click to collapse
I tried adding it
But it lead to some serious lags
Maybe(mostly) I'm doing something wrong .. I'll try to fix it ASAP
Sent from my Nexus 5X using XDA Labs
ABSathe said:
I tried adding it
But it lead to some serious lags
Maybe(mostly) I'm doing something wrong .. I'll try to fix it ASAP
Click to expand...
Click to collapse
Take your time
Nice work with the kernel
You could add more hotplugs, Arch power, I/O governors like sio and tcp algorithm westwood and it will be the best kernel for N ?
New build up !!
https://www.androidfilehost.com/?fid=529152257862681879
Added 3 more governers
smartmax/lionheart/nightmare
Hope you guys enjoy
If someone could please report me for battery life and performance .. it would be great for me
A note about dt2w .. I haven't added it yet but would definitely like to (I'm searching for a proper commit that could work with condor )
If you want to report an issue report it properly
How to access the kernel settings??
sushant_ said:
How to access the kernel settings??
Click to expand...
Click to collapse
Just download Kernel Adiutor or some similar app from play store
ABSathe said:
New build up !!
https://www.androidfilehost.com/?fid=529152257862681879
Added 3 more governers
smartmax/lionheart/nightmare
Hope you guys enjoy
If someone could please report me for battery life and performance .. it would be great for me
Click to expand...
Click to collapse
Thanks man!
Any news on dt2w?
WickedCool19 said:
Thanks man!
Any news on dt2w?
Click to expand...
Click to collapse
He mentioned it just two posts above.
Vikrant Desai said:
He mentioned it just two posts above.
Click to expand...
Click to collapse
I asked in context to the new update.
Whether there was something new about it.
WickedCool19 said:
I asked in context to the new update.
Whether there was something new about it.
Click to expand...
Click to collapse
ABSathe said:
A note about dt2w .. I haven't added it yet but would definitely like to (I'm searching for a proper commit that could work with condor )
Click to expand...
Click to collapse
Well, OP said that dt2w haven't been added yet. Only new governors (at least these are the visible changes)
ABSathe said:
If someone could please report me for battery life and performance .. it would be great for me
Click to expand...
Click to collapse
Performance is great! Everything is running smoothly, nice work :good:
Battery life looks Ok. Haven't really tested it yet
I'm going to provide a better report regarding that at the end of the day.
Note: I'm using this kernel with cm 14.1 from squid2
Raxcoms said:
Performance is great! Everything is running smoothly, nice work :good:
Battery life looks Ok. Haven't really tested it yet
I'm going to provide a better report regarding that at the end of the day.
Click to expand...
Click to collapse
Which ROM u r using??
Ujwal Agrawal said:
Which ROM u r using??
Click to expand...
Click to collapse
Cm 14.1 from squid2
Raxcoms said:
Cm 14.1 from squid2
Click to expand...
Click to collapse
I used r3 version of this kernel on the same ROM and I lost RIL
Ujwal Agrawal said:
I used r3 version of this kernel on the same ROM and I lost RIL
Click to expand...
Click to collapse
It took me arround 2~3 minutes to get RIL working.
RIL wasn't working from the beginning
Related
HI all,
I am presenting you the new version stock 4.2.2 kernel.
Disclaimer :- i am not responsible for any broken or bricked devices.
PLEASE BACK UP DATA BEFORE U FLASH. I AM NOT RESPONSIBLE FOR DATA LOSS.
Give me feed back.
thank you all.
Version -
29/11/2013 version 0.1
http://www.mediafire.com/download/j58tf04t1nq4441/k2wlEXP_0.1.zip
1/12/2013
https://www.mediafire.com/?2h88wa37lw6l17r
3/12/2013
https://www.mediafire.com/?68kcn5db41f23i2
3/12/2013 0.4 version
https://www.mediafire.com/?s578mz58hc9gm5s
05/12/2013 version 0.6
yes i skipped 0.5 version.
https://www.mediafire.com/?se915usu7tijybs
06/12/2013 version 0.7
https://www.mediafire.com/?xa3eel988t91a6a
06/12/2013 version 0.7.1
https://www.mediafire.com/?cgbx6s0i3v0ta4x
06/12/2013 version 0.8
https://www.mediafire.com/?sqzg9rvv7u5x89j
07/12/2013 version 0.9
https://www.mediafire.com/?nriwmydwurb5e0x
07/12/2013 version 0.9.1 fixed
https://www.mediafire.com/?alk0x4n252nx45u
From next version the download will be in following location
https://www.mediafire.com/folder/bl2cvbmgclcfc/stocki9082
From 1.6.1 version downloads will be in following locations.
http://www.androidfilehost.com/?w=files&flid=12474
credits :-
samsung for source
link for source
https://github.com/k2wl/evolution_i9082.git
Changelog : -
version 29/11/2013
Added overclocking upto 1.4 Ghz
added small undervolting for battery saving.
Version 01/12/2013
fixed soft reboot issue.
version 03/12/2013
hopfully fixed reboot and wifi issue
Version 0.4
OC support upto 1400
version 0.6
kernel update to 3.0.32
plz test. i dont have device right now.
version 0.7
hopefully fixed call reboot issue.
Version 0.8
highly experimental, do not flash if you dont know what u doing.
Added new governers adaptive, lulzactiveq,zzmoove, pegasusq, userspace.
Version 0.9
Revert few OC changes and code, should fix charging problem.
added frandom as module.
0.9.1
revert all changes and rebase back to 4.2.2 kernel source.
1.0
Update to 3.0.101.
OC upto 1.7 Ghz
ew version up.
Version 1.6.1
- bluetooth fixed...hopefully..
- implemented boeffela sound 1.6 (thanks to andip71)
- few performance tweaks
- see git log for more
Version 1.7.2
- Hopefully fixed reboot issues....
Version 1.7.8
New version 1.7.8 is here
Versionn 1.7.8
Highly experimental and great kernel...
i am cant post log here...
its long...
so see it yourself on github...
https://github.com/k2wl/evolution_i9082/commits/cm11exp1
from page 1 to 18 ......too long....
version 1.7.9
- Compiled with latest SM toolchain 4.10 (see the screenshot)
- Enable smartass2
- few performance changes
more reserved in case!
Great work.. Thanks..
Sent from my GT-I9082 using Tapatalk 2
k2wl said:
I am posting here a Custom kernel build on source for I9082 Galaxy grand duos.
Disclaimer :- i am not responsible for any broken or bricked devices.
Features
a. Compiled with google toolchain 4.7
b. Compiled with latest kernel building optimizations O3, Ofast.
c. Specific kernel flags Optimised specially for our beloved i9082
d. Fast usb charging support. Now you can get fast charging by connecting usb like AC adapter.
e. Customized CPU governers like hotplug, pegasusq (original Samsung governer for multicore support), interactivex, gallimaufry, ondemandx,sakuractive,lulzactive, smartassV2, adaptiveX,lagfree, etc in all around 15 governers to choose from for different needs.
f. I/O schedulers added SIO,fifo,row,V(R).
g. Disabled MMC_CAP_ERASE -> no more hardbrick bug
so now fun part. How to install???
1.download the file below
http://d-h.st/qk4
2.copy to root of ur partition like c:/ or d:/ etc (it's easier to remember and locate)
3. connect your phone to pc & open odin3 3.04 (search xda or google)
make sure u have drivers properly installed and odin shows blue connection sign with [com].!!!
4. click on pda & select kernel_k2wl_v1.tar
5. click start. & wait until says pass and phone reboots.
now you have custom kernel.
how to use features
if u have my latest rom then it has no frill cpu app included or download no frill cpu from play store its free. you can also use setCPU which is paid ...change governors and i/o according to ur will . but do it all on ur own risk.
i recommend hotplug as governor and sio as i/o with max frequency of 1.2ghz and min of 600mhz.
more features coming in next update.
issues please report here.
credits :-
samsung for source
Click to expand...
Click to collapse
What banefit
Sent from my GT-I9082 using xda premium
For custom recovery, create another thread and paste link here..
I think we will have separate section for our i9082 !!
Just to remind you,
In next update, Add BLN Mod.. here is the procedure http://forum.xda-developers.com/showthread.php?t=1342289
and Official method
It will give u a little background for mod.
DBZo07 said:
For custom recovery, create another thread and paste link here..
I think we will have separate section for our i9082 !!
Just to remind you,
In next update, Add BLN Mod.. here is the procedure http://forum.xda-developers.com/showthread.php?t=1342289
and Official method
It will give u a little background for mod.
Click to expand...
Click to collapse
Will surely add BLN mod as soon as possible.
thanks for suggestion.
Im the guinea pig
I'll be testing this on the Latin variant 9082L
DBZo07 said:
For custom recovery, create another thread and paste link here..
I think we will have separate section for our i9082 !!
Just to remind you,
In next update, Add BLN Mod.. here is the procedure http://forum.xda-developers.com/showthread.php?t=1342289
and Official method
It will give u a little background for mod.
Click to expand...
Click to collapse
Nice suggestion to add BLN Mod..:thumbup:
Sent from my GT-I9082 using Tapatalk 2
k2wl said:
Will surely add BLN mod as soon as possible.
thanks for suggestion.
Click to expand...
Click to collapse
it's my pleasure to get best possible mods from you!!
keep up the work..
@k2wl
Great work:good:...Did you test it by yourself?
What is max OC? Any heat issue or reboot?
Also post the process to go back to stock Kernel that will help newbie here...They will simply try something and chances will brick their phone..:silly:
KSKHH said:
@k2wl
Great work:good:...Did you test it by yourself?
What is max OC? Any heat issue or reboot?
Also post the process to go back to stock Kernel that will help newbie here...They will simply try something and chances will brick their phone..:silly:
Click to expand...
Click to collapse
no OC at present ..i am testing it..
no issues so far its stable and no reboot or overheating issues.
KSKHH said:
@k2wl
Great work:good:...Did you test it by yourself?
What is max OC? Any heat issue or reboot?
Also post the process to go back to stock Kernel that will help newbie here...They will simply try something and chances will brick their phone..:silly:
Click to expand...
Click to collapse
see my rom thread . in OP i have put an attachment about files i have removed. you requested it previously as i remembered right???
Stock Samsung I9082XXAMCD_V1.1 ROM > http://d-h.st/mYW
k2wl can we use your kernel to bali's rom?
immcbee said:
Stock Samsung I9082XXAMCD_V1.1 ROM > http://d-h.st/mYW
k2wl can we use your kernel to bali's rom?
Click to expand...
Click to collapse
ya u can use it with any stock rom u want either from balliboxer or me or even samsung default rom
k2wl said:
ya u can use it with any stock rom u want either from balliboxer or me or even samsung default rom
Click to expand...
Click to collapse
Thanks for the info i will try this
Sent from my GT-I9082 using Tapatalk 2
Excellent work mate, if we keep progressing like this we might get our own sub-forum! Some suggestions -
1) You could integrate CWM recovery with the kernel, if you haven't done it already. Then provide a .tar one package file for flashing via ODIN
2) Maybe add a warning about triggering an increase in binary counter in OP
3) Does it support Vodoo sfx?
Waiting for OC! (I hope you have a JTAG jig ready, especially with the amount of development you are doing)
P.S. - We can also check out support for Heimdall and Mobile Odin
Tianhe said:
Excellent work mate, if we keep progressing like this we might get our own sub-forum! Some suggestions -
1) You could integrate CWM recovery with the kernel, if you haven't done it already. Then provide a .tar one package file for flashing via ODIN
2) Maybe add a warning about triggering an increase in binary counter in OP
3) Does it support Vodoo sfx?
Waiting for OC! (I hope you have a JTAG jig ready, especially with the amount of development you are doing)
P.S. - We can also check out support for Heimdall and Mobile Odin
Click to expand...
Click to collapse
thanks for feedback!!! i dont have JTAG jig with me... im just experimenting...
it does not have vodoo sfx yet
no feed back on kernel??? is anybody using it or not????
pllz leave a feedback
Well. I am waiting for the O.C feature before using it.
Code:
***WARNING***
-READ CAREFULLY!!
YOU FLASH THIS KERNEL AT YOUR OWN RISK.I TAKE NO RESPONSIBILITY FOR ANY DAMAGE THAT MAY OCCUR DUE TO THE FLASHING OF THIS IMAGE.
I WILL NOT BE RESPONSIBLE FOR LOST DATA,BRICKED PHONE,OR ANYTHING OF THE SUCH.(PHONE EXPOLDES,OVERHEATS ETC)
THIS KERNEL IS ONLY FOR THE S5 MINI SM-G8OOF (Exynos) DO NOT FLASH THIS ON ANY OTHER DEVICE!
EOL (End of Life)
I will be creating a new thread for my N kernel - Stay tuned!
UPDATED Linux kernel to 3.4.113 on 27-10-2016UPDATED to v2.5 on 13-10-2016
Code:
Changes in version 2.5
*Unlocked CPU frequencies 1500,300 and 200MHZ
*Switched to self built Linaro/Sabermod toolchain
*Added many more optimization flags
*Added DriveDroid support
Features
-Now supports Many different ROMS for the G800F
-Compiled with self built optimized Linaro/SaberMod toolchain ("LinaroMod")
-Unlocked CPU frequencies: 1500MHZ,200MHZ and 300MHZ
-Updated Linux kernel from 3.4.39 to the latest 3.4.113
-Added many optimizations (You can see all of the optimization flags in the makefile on the kernel source page)
-enabled graphite
-Added Drivedroid Support - http://softwarebakery.com/projects/drivedroid
-Fading LED's
-Added I/O schedulers
-zen
-sio
-fifo
-fiops
-tripndroid
-vr
-Added CPU governors
-zzmoove
-hyper
-alucard
-darkness
-nightmare
-wheatley
-smartassv2
-dancedance
-pegasusq
Click to expand...
Click to collapse
You will need Kernel Adiutor (free from the play store) or similar app capable of allowing you to switch I/O schedulers and
CPU governors in order to be able to change and set those.
I can recommend this.
http://forum.xda-developers.com/android/apps-games/kernel-adiutor-mod-singularity-kernel-t3333549
Click to expand...
Click to collapse
Known Issues
Let me know and I will try to fix them
Click to expand...
Click to collapse
Installation
I HIGHLY recommend that you do a full backup before flashing this kernel.I am not responsible if you lose any or all of your data.BACKUP!!
1.Download the "Spookcity_Kernel-MM"
2.Place the zip onto your phones storage
3.Reboot into recovery (Volume-Up + Home + Power button)
4.Select install
5.Flash the downloaded kernel
6.Go back a few times in TWRP.Select wipe -> Advanced wipe and wipe Dalvic/Art cache and the cache partition
If you do not do this you are very likely to experience strange issues.You have been warned.Do not report problems if you did not do this.
7.Reboot and hopefully enjoy.
Click to expand...
Click to collapse
Downloads
Spookcity_Kernel-MM
Click to expand...
Click to collapse
Sources
Toolchain - https://github.com/Spookcity/Android-Toolchains
Kernel - https://github.com/Spookcity/android_kernel_samsung_kminilte
Click to expand...
Click to collapse
Code:
CHANGELOG
[U]18-06-2017[/U]
-Switched to anykernel2
[U]31-10-2016[/U]
-Added zip for Bliss Rom
[U]13-10-2016[/U]
-Unlocked CPU freq 1500,200,300MHZ
-Switched to my self built toolchain
-Added many more optimization flags to the build
-Added DriveDroid support
-Added zip for Zephyr-OS
[U]24-07-2016[/U]
- Added zips to support more custom ROMS
[U]V2 - 23-07-2016[/U]
-Fixed RAMDISK to make it compatible and actually work with newer builds of CM13
-Changed SELinux from disabled to permissive to be in line with the "stock" CM kernel
-Added I/O schedulers
-fiops
-tripndroid
-vr
-Added CPU governors
-pegasusq
[U]V1 - Initial Release[/U]
Thanks to
-hennymcc and CTXz for bringing CM13 to our device! I used their kernel sources to build this.Without them I never would have been able to attemp this.
-DJ_Steve for his custom kernel.Without being able to look at his sources and cherry-pick some things I would also not have been able to do this.
-CurtisMJ Ditto same thing here.His kernel build and sources were very helpful to me.
-frap129 for his amazing toolchains!
-ArchiDroid
Anyone I may have left out sorry.I appreciate you all!
Click to expand...
Click to collapse
I hope you enjoy and please say thanks if you find this at all useful
XDA:DevDB Information
Spookcity_Kernel, Kernel for the Samsung Galaxy S5 Mini
Contributors
spookcity138
Kernel Special Features:
Version Information
Status: Beta
Created 2016-05-26
Last Updated 2017-06-18
Nice, finally some new development for our phone =)
I will test the kernel right away...
One thing that I would really love would be if you have the time to look into adding DT2W :angel:
Thanks for your work so far :good:
*edit*
booting went well. However WiFi doesnt work for me :/ I uploaded the logcat-output filtered for "wifi" to hastebin. If you need anything else for debugging let me know. Thanks to dual boot I will keep your custom kernel on one ROM
log
zaworka said:
Nice, finally some new development for our phone =)
I will test the kernel right away...
One thing that I would really love would be if you have the time to look into adding DT2W :angel:
Thanks for your work so far :good:
*edit*
booting went well. However WiFi doesnt work for me :/ I uploaded the logcat-output filtered for "wifi" to hastebin. If you need anything else for debugging let me know. Thanks to dual boot I will keep your custom kernel on one ROM
log
Click to expand...
Click to collapse
Thanks for trying out the kernel. That's weird about the WiFi. I have never had that happen in the bunch of times I have flashed it. I will def look into it.I'll have a look at the log, although at this point I'm also not that great at interpreting those, so it may not help. I'll see what I can do though
Sent from my SM-G800F using Tapatalk
can you tell me someone what is kernel?
br3acker said:
can you tell me someone what is kernel?
Click to expand...
Click to collapse
http://www.makeuseof.com/tag/linux-kernel-explanation-laymans-terms/
zaworka said:
Nice, finally some new development for our phone =)
I will test the kernel right away...
One thing that I would really love would be if you have the time to look into adding DT2W :angel:
Thanks for your work so far :good:
*edit*
booting went well. However WiFi doesnt work for me :/ I uploaded the logcat-output filtered for "wifi" to hastebin. If you need anything else for debugging let me know. Thanks to dual boot I will keep your custom kernel on one ROM
log
Click to expand...
Click to collapse
OK,well after looking at the log and trying to decipher it and then thinking a bit I have only come up with one possibility.Maybe somehow your wpa_supplicant.conf file located in /data/misc/wifi/wpa_supplicant.conf has the wrong permissions for some reason.If you want you could try to check and possibly change the permissions.If you decide to try this I would backup the file because you never know.
The permissions should be: Owner - wifi Group - wifi...
Owner read and write/Group read and write/ others none.
If your permissions are correct on that file the only other thing I could possibly think of to do if you wanted would be to delete that file,wpa_supplicant.conf.Only after you back it up it though because you will lose all of your passwords,and reboot.It should recreate it.Do that at your own risk though.This is all I have come up with because I have never had that problem,so it's a bit difficult.
I am sorry, I think the error was my fault and not a bug of the kernel. I think the build that I am running at the moment is one I build myself and used sabermod toolchain. I remembered that I had the same problem using DMPKernel on that build. I thought I was using one of hennymmc's builds by now - so, sorry for reporting but thanks for looking into anyways.
Unfortunately I tried both and didnt solve the issue ,the permissions were set correctly btw.
I just installed the CM13 on another partition but - unless I have a flashable zip file - I can not install your kernel on that one. Would it be possible to provide the kernel as .zip?
zaworka said:
I am sorry, I think the error was my fault and not a bug of the kernel. I think the build that I am running at the moment is one I build myself and used sabermod toolchain. I remembered that I had the same problem using DMPKernel on that build. I thought I was using one of hennymmc's builds by now - so, sorry for reporting but thanks for looking into anyways.
Unfortunately I tried both and didnt solve the issue ,the permissions were set correctly btw.
I just installed the CM13 on another partition but - unless I have a flashable zip file - I can not install your kernel on that one. Would it be possible to provide the kernel as .zip?
Click to expand...
Click to collapse
Sure thing.I updated the download section above and added a flashable zip.I think it'll work.
spookcity138 said:
Sure thing.I updated the download section above and added a flashable zip.I think it'll work.
Click to expand...
Click to collapse
Nice, that worked! Thanks for the effort :good:
Will test it over the next few days :fingers-crossed:
zaworka said:
Nice, that worked! Thanks for the effort :good:
Will test it over the next few days :fingers-crossed:
Click to expand...
Click to collapse
Good,I'm glad that worked.You thoughts and feedback are most welcomed.
Any chance this kernel hits the G800H for cm 13 too ?
I can be your tester
sasukesama said:
Any chance this kernel hits the G800H for cm 13 too ?
I can be your tester
Click to expand...
Click to collapse
Hey, I appreciate the offer. That is something I can look into at some point. No promises. In still trying to learn all of this stuff.
Sent from my SM-G800F using Tapatalk
spookcity138 said:
Hey, I appreciate the offer. That is something I can look into at some point. No promises. In still trying to learn all of this stuff.
Sent from my SM-G800F using Tapatalk
Click to expand...
Click to collapse
Sounds good
I think you can do the same (using the cm13 kernel and DJ_Steve kernel stuff) as he has a G800H version of his kernel
I use your kernel , you can repair the wifi ?
Abde77 said:
I use your kernel , you can repair the wifi ?
Click to expand...
Click to collapse
What's the problem with the WiFi exactly? I need to update this anyway. I will at some point.I've had no WiFi probs though.
Sent from my SM-G800F using Tapatalk
spookcity138 said:
What's the problem with the WiFi exactly? I need to update this anyway. I will at some point.I've had no WiFi probs though.
Sent from my SM-G800F using Tapatalk
Click to expand...
Click to collapse
Conducted any work on the development of the kernel? About sound problems and headphones like DJ_Steve , initially had no problems, and then there., maybe it depends on kernel version? Is there a chance to make all the improvements in version 3.4.39 ? (Google translation)
Oleggluk said:
Conducted any work on the development of the kernel? About sound problems and headphones like DJ_Steve , initially had no problems, and then there., maybe it depends on kernel version? Is there a chance to make all the improvements in version 3.4.39 ? (Google translation)
Click to expand...
Click to collapse
I actually haven't touched this recently at all.I've been spending too much time on the mess that is my AOSP build [emoji2]
I give up on that for now though.It's giving me a headache.
I will try to get back to this soon,as I don't even think it works with any of my builds.I don't know.I'm not even using this right now.
I never actually had any real audio issues with this however and I did use if for awhile,so that's strange.
Sent from my SM-G800F using Tapatalk
spookcity138 said:
I actually haven't touched this recently at all.I've been spending too much time on the mess that is my AOSP build [emoji2]
I give up on that for now though.It's giving me a headache.
I will try to get back to this soon,as I don't even think it works with any of my builds.I don't know.I'm not even using this right now.
I never actually had any real audio issues with this however and I did use if for awhile,so that's strange.
Click to expand...
Click to collapse
Also does not have wi-fi access in the new Assembly СМ13 from ayke with this kernel. I took apart your kernel and replace the ramdisk from the new build, wifi now works. (Google translation)
Oleggluk said:
Also does not have wi-fi access in the new Assembly СМ13 from ayke with this kernel. I took apart your kernel and replace the ramdisk from the new build, wifi now works. (Google translation)
Click to expand...
Click to collapse
I kinda remember this issue as well.Good to know about the ramdisk.
Its such a strange thing how only some experience the robotic voice...and you have no microphone problems with ayke's build either? Like it stops working after a phone call?
Sent from my SM-G800F using Tapatalk
spookcity138 said:
I kinda remember this issue as well.Good to know about the ramdisk.
Its such a strange thing how only some experience the robotic voice...and you have no microphone problems with ayke's build either? Like it stops working after a phone call?
Sent from my SM-G800F using Tapatalk
Click to expand...
Click to collapse
Robot voice I have never had. And mute has the same problem that error camera. If you kill the mediaserver, the microphone performance is restored. You can use the long-known app Mediaserver Killer. (Google translation)
FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
Features
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazyAquaKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazyAquaKernel over the kernel that came with your ROM!!)
Toolchain:
UBERTC 4.9 Toolchain
CPU:
- governors:
elementalx
interactive
ondemand
zzmoove
ondemandplus
conservative
powersave
userspace
- input boost
IO schedulers:
bfq
tripndroid
cfq
noop
deadline
fiops
row
sio
siopilus
zen
vr
fifo
Thermal:
- msm thermal
GPU:
- Adrenoboost
More:
- init.d support
- insecure kernel (adb has root privileges)
- frandom
- PVS level info
- frandom
- notification led control
- kcal v2
- CRC Check Disabled
- Dynamic filesystem read-ahead
- A lot improvments
- A lot fixes
Supported Variants:
H870
US997
Download Link CrazyAquaKernel [H870/US997] [AnyKernel]:https://www.androidfilehost.com/?w=files&flid=209354
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazyAquaKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazyAquaKernel !!!!
Credits
thx Faux123
thx Savoca
thx RenderBroken
thx flar2
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazyAquaKernel, Kernel for the LG G6
Contributors
CrazyGamerGR
Source Code: https://github.com/CrazyGamerGR/CrazyAquaKernel-g5-g6-los-nougat
Kernel Special Features:
Version Information
Status: Testing
Created 2017-08-24
Last Updated 2017-08-23
FAQ
Recommended app : Kernel Adiutor
changelogs
v1.0/24-08-17
- initial release
v2.0/8-9-17
- input boost
- frandom
- msm thermal
- many improvments under the hood
For users and devs!!
All my kernels are based on cyanogenmod/lineageos source ,if someone who believes" i stoled their source" i have video captures and anyone who believes something just report me and i will have the last laugh .every tweak/mod/feature i used i edited/tweaked on my own and anyone with problem just stay away. My sources are free for anyone and can be used(i saw some ppl use them already)i don't care like other devs and i am happy and proud if someone use my work(the words" i work many hours on that project" the best repeatable words(many devs without the recognized tag and not with many thanks,they have worked for many hours/days/months and they don't cry and fight other devs )if for some devs their source are so much rare and hardworked just keep them privet(their work include their name so no problem ...we are not here for the fame ...we just want to improve the devices to make them better and not to fight with each other...
Why i am telling you all these?!
I have had many kernels unreleased from fights...i will continue to new clean projects based on lineageos and i will not care much with my source to wait many days to upload them with all the history of them because 2-3 "devs" they believe i used or edited their source...i am not a popular dev but you can't believe and no one knows how many days without sleep and hours of hardwork i have done, to do all this(and many not release source/work, much more than other devs...
[KERNEL][G6][H870/US997][LOS14.1]CrazyAquaKernel
reserve1
[KERNEL][G6][H870/US997][LOS14.1]CrazyAquaKernel
reserve2
So you used lineage source but removed all the lineage git history? I don't see how that's exceptable. But hey who am I to say.
rc420head said:
So you used lineage source but removed all the lineage git history? I don't see how that's exceptable. But hey who am I to say.
Click to expand...
Click to collapse
I don't remove the history,i just download the source from lineageos github and i working on them... this is easier for me because if i try to upload all the source with history i need 1day to wait to upload the source.
Sent from my iPhone using Tapatalk Pro
CrazyGamerGR said:
For users and devs!!
All my kernels are based on cyanogenmod/lineageos source ,if someone who believes" i stoled their source" i have video captures and anyone who believes something just report me and i will have the last laugh .every tweak/mod/feature i used i edited/tweaked on my own and anyone with problem just stay away.
Click to expand...
Click to collapse
Let me guess...that happens a lot. Coincidences are crazy...especially when they happen over and over! Haha
calebcabob said:
Let me guess...that happens a lot. Coincidences are crazy...especially when they happen over and over! Haha
Click to expand...
Click to collapse
Just one time i had a problem ^^
Why did you choose to call it crazyaqua as if a person wasnt knowlegable enough they would say it was related to AquariOs there for if there was a problem with it not saying there is but it could cause negative feed back for them i think you should put in your disclaimer that this has no association with AquariOS rom or their developers.Just my opinion!!!
SD CARD
Hi i just installed your kernell thats boot on stock rom ... Great.... But infortunately my sdcard don t appear
gillim74 said:
Why did you choose to call it crazyaqua as if a person wasnt knowlegable enough they would say it was related to AquariOs there for if there was a problem with it not saying there is but it could cause negative feed back for them i think you should put in your disclaimer that this has no association with AquariOS rom or their developers.Just my opinion!!!
Click to expand...
Click to collapse
My project names are from dc comic heroes,my new projects was crazysuperkernel from superman ,crazybatkernel from batman ,crazyaquakernel from aquaman but i don't have ready logo for my new aquaman project
Sent from my iPhone using Tapatalk Pro
bypass83 said:
Hi i just installed your kernell thats boot on stock rom ... Great.... But infortunately my sdcard don t appear
Click to expand...
Click to collapse
I support only LineageOS based roms thats why this bug
Sent from my iPhone using Tapatalk Pro
CrazyGamerGR said:
I support only LineageOS based roms thats why this bug
Sent from my iPhone using Tapatalk Pro
Click to expand...
Click to collapse
Is it possible to have a stock version of the kernel?
If it isn't possible, maybe the SD card bug on stock can be fixed. Maybe it's a fstab bug?
Nice to see some kernel development for the G6! Thank you
notification led control??
The G6 has a notification led?
pittrich67 said:
notification led control??
The G6 has a notification led?
Click to expand...
Click to collapse
It hasn't got led ,this is one reason where i don't by g6 :/
Sent from my iPhone using Tapatalk Pro
CrazyGamerGR said:
It hasn't got led ,this is one reason where i don't by g6 :/
Click to expand...
Click to collapse
What is a notification LED when I have an AOD?
pittrich67 said:
What is a notification LED when I have an AOD?
Click to expand...
Click to collapse
Do custom roms have AOD?
pittrich67 said:
What is a notification LED when I have an AOD?
Click to expand...
Click to collapse
I like aod too but its not the sama like a notificaton led at least for battery life but aod is great and more helpfull than a notification led
Sent from my iPhone using Tapatalk Pro
Features:
- Compiled with SaberMOD toolchain with -o3 flags
- Linux 3.10.107 (UPSTREAM TO LINUX 3.11)
- Kernel self-protection and high quality ASLR
- Dynamic management of dirty page writebacks, expire and cache pressure
- Optimized AES and SHA1 routines for ARM cpu architecture
- Optimized SLUB memory allocator
- Optimized ARM RWSEM (read/write semaphore) algorithm
- Optimized asynchronous I/O latency on solid state disks
- Optimized string and memcopy libs
- Filesystem dynamic read-ahead (based on disk size)
- CIFS support
- Fast Random generator (frandom) support
- Dynamic FSync v1.2
- Dynamic dirty page writebacks
- VM tweaks for performance and less battery consumption
- Revised LowMemoryKiller parameters for better performance
- Dynamic management of the minimal timer slack value during suspend/resume
- LowMemoryKiller management of not killable processes
- WakeLock Taggles by FranciscoFranco
- Controls for sched features (Attributes can be found under /sys/kernel/sched/*) (like arch power)
- NVIDIA power suspend
- Many, many patches from others kernel sources (like 3.14.x and 3.18.x)
- Smooth, Smooth!!!!
- Many patches (Check all commits here)
Support
- Only EMUI 4.1 based roms (like AOSPA)
Intallation
- Download Here current version
- Flash via TWRP
- Enjoy
(NOTE) Signal take arround of 2 min.
DOWNLOADS SECTION:
V04 (BREAK)
HackKenrel 02 Stable
HackKernel 01 (Data Broken)
GitHub:
GITHUB
Does it work on emui 4.1?
Xyzko said:
Does it work on emui 4.1?
Click to expand...
Click to collapse
Yes. Please read The full OP.
Wow, awesome, which one is better, what do you think? Simple or Hack kernel? Does it have fcking good performance?
D1stRU3T0R said:
Wow, awesome, which one is better, what do you think? Simple or Hack kernel? Does it have fcking good performance?
Click to expand...
Click to collapse
@xperiafan13 did you fixed gpu?
are all CPU kernels functional or just the first four?
bandos23 said:
are all CPU kernels functional or just the first four?
Click to expand...
Click to collapse
Should be... I wait someone to test it xd don't wanna be first.
@xperiafan13
I flashed this kernel and its awesome. I used impulse governer and found a bug.
I cannot use by data although there is H+ seen at the signal bars.
udtul said:
@xperiafan13
I flashed this kernel and its awesome. I used impulse governer and found a bug.
I cannot use by data although there is H+ seen at the signal bars.
Click to expand...
Click to collapse
Hello, what version of emui have?
I check this......
xperiafan13 said:
Hello, what version of emui have?
I check this......
Click to expand...
Click to collapse
Did you fixed gpu? Can @kosmitchak improve your kernel a little bit, if he can? Is it mainly for p8lite or modified from 4c?
Tried to flash it on MM 4.1.3 and got bootloop...
ekobaltika said:
Tried to flash it on MM 4.1.3 and got bootloop...
Click to expand...
Click to collapse
Maybe only emui 4 and 4.0.3
OP, please can you put the right link to your kernel source code in the OP ? As I think you already know, is mandatory to put a valid link on OP with your kernel source code - including absolutely all changes to the stock kernel
Thanks for understanding !
D1stRU3T0R said:
Maybe only emui 4 and 4.0.3
Click to expand...
Click to collapse
Probably you're right.
Installed, seems fine but the cellular data connection is not working, wifi works fine.
It has less governor profiles than SimpleKernel like Pmc, smartmax are missing.
It will be great to have everything in one place. Good job! :good:
Rom : Emui 4.0.3 B610 Basic
surdu_petru said:
OP, please can you put the right link to your kernel source code in the OP ? As I think you already know, is mandatory to put a valid link on OP with your kernel source code - including absolutely all changes to the stock kernel
Thanks for understanding !
Click to expand...
Click to collapse
Sure, please wait me, mi internet connection is a sheet... but yes
xperiafan13 said:
Hello, what version of emui have?
I check this......
Click to expand...
Click to collapse
H+ appears but datanot working.
I am on emui 4.0
Version: chinese aleU00 b575
Thanks
Please upload the source to github end let @kosmitchak to fő his own things, so we can have Simple V2 Hack kernel? your kernel is soo fcking interesting, and his one has alot of performance. We would like to see 1 combined version, and please, try to search for cpu/gpu overclock.
Btw, surdu has more likes than op... Shame on the community.
D1stRU3T0R said:
Please upload the source to github end let @kosmitchak to fő his own things, so we can have Simple V2 Hack kernel your kernel is soo fcking interesting, and his one has alot of performance. We would like to see 1 combined version, and please, try to search for cpu/gpu overclock.
Btw, surdu has more likes than op... Shame on the community.
Click to expand...
Click to collapse
whe i return to my home i upload all code, plaese be patient
Quick off topic: kernel 3.10 will be supported till 2017 October, so we can get one big update.
Made a new kernel forked from the stock nameless kernel and I got really good benchmark scores. For banking apps download universal safety fix and then hide all your banking apps and your apps that don't work with root this kernel comes with root but when you get into magisk manager you can unroot your device I WILL NOT BE RESPONSIBLE FOR A BRICKED PHONE! if you say anything like "THIS GUY FRICKED MY PHONE" i will laugh at you Source code: https://github.com/Gavin123-code/kernel_oneplus_sm8250 Credits The Nameless-AOSP team and The Illusion-X Devs. happy flashing!
GbnrVR said:
Made a new kernel forked from the stock nameless kernel and I got really good benchmark scores
Click to expand...
Click to collapse
Overclocked to 4250Mhz and I got good battery life like 16 hours (THIS US ONLY TESTED ON NAMELESS) it should work on other roms but just saying and ANDROID 12 only I'll try to keep it updated with nameless updates but updates will stop when they switch kernel if they do. CREDITS: Nameless AOSP Maintainer For the 8T and the IllusionX team
GbnrVR said:
Overclocked to 4250Mhz and I got good battery life like 16 hours (THIS US ONLY TESTED ON NAMELESS) it should work on other roms but just saying and ANDROID 12 only I'll try to keep it updated with nameless updates but updates will stop when they switch kernel if they do. CREDITS: Nameless AOSP Maintainer For the 8T and the IllusionX team
Click to expand...
Click to collapse
Download
96 MB file on MEGA
mega.nz
I AM NOT RESPONSIBLE FOR A BRICKED DEVICE
Will this fix for the qualcomm crash dump problem I understand the original version seem to have problems with?
badadam said:
Will this fix for the qualcomm crash dump problem I understand the original version seem to have problems with?
Click to expand...
Click to collapse
I don't know I haven't experienced those problems
You can try
GbnrVR said:
You can try
Click to expand...
Click to collapse
Also this is incompatible with the OnePlus 9R
GbnrVR said:
You can try
Click to expand...
Click to collapse
OK, I´ll give it a try and see how it goes.
Flashed it and now my banking apps are not working. Detected as rooted....
badadam said:
Flashed it and now my banking apps are not working. Detected as rooted....
Click to expand...
Click to collapse
Use universal safety net fix and hide the banking apps
GbnrVR said:
Use universal safety net fix and hide the banking apps
Click to expand...
Click to collapse
I´m not rooted so I´ll just see if a dirty flash can bring it back.
badadam said:
I´m not rooted so I´ll just see if a dirty flash can bring it back.
Click to expand...
Click to collapse
I thought you said detected as rooted because this kernel is prerooted and with magisk Manager you can unroot
You need to post your source. Also you should really provide more info in the OP, especially since it's already patched with magisk supposedly...
Thanks for the build .
Can you post the source please ?
Have you modified illusion X ? If so what features?
Would be great to have more cpu governor's / TCP algorithms and I/O schedulers . As well as under clocking CPU and GPU
Looking forward to upcoming releases .
UPDATE ** Experiencing extreme lag when switching between apps .
GPU has -44mhz - 800mhz clock speeds , perhaps -44hz is the issue?
Your on the right track , great to see fresh kernel ( fork )
azoller1 said:
You need to post your source. Also you should really provide more info in the OP, especially since it's already patched with magisk supposedly...
Click to expand...
Click to collapse
Fun fact this comes from nameless so you can look at the nameless kernel sources
GbnrVR said:
Fun fact this comes from nameless so you can look at the nameless kernel sources
Click to expand...
Click to collapse
Oh I get what you mean since it's like overclocked and stuff
hightech316 said:
Thanks for the build .
Can you post the source please ?
Have you modified illusion X ? If so what features?
Would be great to have more cpu governor's / TCP algorithms and I/O schedulers . As well as under clocking CPU and GPU
Looking forward to upcoming releases .
UPDATE ** Experiencing extreme lag when switching between apps .
GPU has -44mhz - 800mhz clock speeds , perhaps -44hz is the issue?
Your on the right track , great to see fresh kernel ( fo
Click to expand...
Click to collapse
hightech316 said:
Thanks for the build .
Can you post the source please ?
Have you modified illusion X ? If so what features?
Would be great to have more cpu governor's / TCP algorithms and I/O schedulers . As well as under clocking CPU and GPU
Looking forward to upcoming releases .
UPDATE ** Experiencing extreme lag when switching between apps .
GPU has -44mhz - 800mhz clock speeds , perhaps -44hz is the issue?
Your on the right track , great to see fresh kernel ( fork )
Click to expand...
Click to collapse
Modded IllX And -44Mhz is a glitch because somehow android cant handle so 4250Mhz also thank you for the nice messages ill figure out how to get the sources so i hope XDA doesnt delete this
GbnrVR said:
Modded IllX And -44Mhz is a glitch because somehow android cant handle so 4250Mhz also thank you for the nice messages ill figure out how to get the sources so i hope XDA doesnt delete this
Click to expand...
Click to collapse
also question can anyone help me decompile a kernel im on windows and i am stuck