Related
Looking for a case that offers a good amount of screen protection so that the glass doesn't crack if I drop it. Anyone have any recommendations?
Sent from my XT1095 using Tapatalk
At minimum you'll want a tpu cover like a cruzerlite. It curves around the front over the curved glass edge where it's most likely to crack in a drop. Tudia and diztronic have well-reviewed covers as well.
I just bought a Hula case off amazon and I'm loving it. I have a wood back so I wanted a case that doesn't cover it since I love how it feels and looks.
I also just ordered the Hula off of Amazon. From what I can see it seems to have a good lip on the front and back, and also allows you to see the full back. I'm currently using the Supcase Unicorn Beetle Pro, and while it is a good case with much more protection, It's just too much bulk for an every day case. In my opinion, I didn't customize my phone just to cover it up with a plain case! I was looking into some of the clear tpu cases but most either cover the dimple or are missing a mic cut out on the back...
I have the Hula bumper case and somehow managed to drop my phone this morning while getting out of the car, and the screen shattered. I wouldn't count on it offering much protection for your screen...
I've seen phones in otter cases where the screen shattered upon dropping. I don't think there is any case out there that will protect against certain drops. If the phone drops and lands a certain way, it will shatter almost every time.
Hello!
Currently I'm using
Spigen Slim Armor:
http://www.amazon.com/gp/product/B01AUR18D0?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00
IQ Shield Matte
http://www.amazon.com/gp/product/B01BG2ELRI?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00
Its working horribly, there's bubble in all corners (See photos attached). If i'm not mistaken the spigen case is pushing hard on the corners top and bottom.
Is this happening to some of you guys?
What combination of case and screen protector are you guys using so that this doesn't happens?
Thanks in Advance
I have been using the ZAGG invisible shield hd dry combined with a Supcase Unicorn Beetle Pro.
I LOVE this combo.
The screen protector went on relatively easily. did that day one. no bubbles anywhere and it's super clear. it wrapped around the sides easily with the special applicator included in the box. this is NOT a typical credit card squeegee install. I had it just like that for a few days until the case showed up.
What i like about this case is the two part sandwich effect. There is a frame that clips on the front of the phone and the whole ting then inserts into the back. sort of like the ottorbox cases. only half the price. The frame completely protects the edges of the screen protector, i don't thing there really is a way to accidentally rub on the edges of the screen protector and work it loose.
And bonus, it works in my QI wireless charger with no problems whatsoever.
I've got the IQ shield non matte and a Ringke Fusion Crystal case. It's shock simple and has dust covers.
Case > https://www.amazon.com/dp/B01A16BCMW/ref=cm_sw_r_other_awd_bTE6wb4Q9ZZK8
Sent from my SM-G935V using Tapatalk
mvpulsts said:
I have been using the ZAGG invisible shield hd dry combined with a Supcase Unicorn Beetle Pro.
I LOVE this combo.
The screen protector went on relatively easily. did that day one. no bubbles anywhere and it's super clear. it wrapped around the sides easily with the special applicator included in the box. this is NOT a typical credit card squeegee install. I had it just like that for a few days until the case showed up.
What i like about this case is the two part sandwich effect. There is a frame that clips on the front of the phone and the whole ting then inserts into the back. sort of like the ottorbox cases. only half the price. The frame completely protects the edges of the screen protector, i don't thing there really is a way to accidentally rub on the edges of the screen protector and work it loose.
And bonus, it works in my QI wireless charger with no problems whatsoever.
Click to expand...
Click to collapse
Does the zagg protector should help in case of drops? And is it as good as a tempered glass in that case?
Sent from my SM-G935F using Tapatalk
I don't know about best combo (because this is my first combo) but I have the Spigen Ultra Hybrid crystal clear and the Skinomi TechSkin on my gold platinum S7 Edge and so far so good. I just installed the Skinomi last night since I got it yesterday. My Spigen case I've had on the phone since March 5th when the case arrived. I ordered both products from Amazon.
The Skinomi I had did the same as the op, as for the Zagg HD amazon refunded my order yesterday saying something was wrong the product and they were canceling it.
Sent from my SM-G935V using Tapatalk
I got a similar case for my S7E ... Spigen Tough armor with the Armour Suit Military Shield... still awaiting my phones frm T-mobile
Zagg HD Dry front and back with Otterbox Symmetry Clear Series
My UAG case pushed the top right corner had to trim just a little. This case seems to be more screen protector friendly. Both cases are pretty much identical is size. The otterbox is much stiffer and back seems more scratch resistant, the UAG is already scratched. UAG offers a little more screen protection in the corners and the buttons are much easier to press. Pics are taken on top of the UAG case for size comparison.
Bodyguardz HD Curved with the UAG ICE, No problems with the protector peeling.
AndroiderM said:
My UAG case pushed the top right corner had to trim just a little. This case seems to be more screen protector friendly. Both cases are pretty much identical is size. The otterbox is much stiffer and back seems more scratch resistant, the UAG is already scratched. UAG offers a little more screen protection in the corners and the buttons are much easier to press. Pics are taken on top of the UAG case for size comparison.
Click to expand...
Click to collapse
Any problems with the Otterbox peeling up the sides of the protector?
felloffthetruck said:
Any problems with the Otterbox peeling up the sides of the protector?
Click to expand...
Click to collapse
Nope, everything is laying down with no signs of peeling. The zagg did stay on the phone for 3 days with no case while I was waiting for Amazon to deliver and I did blow dry the edges. I don't think this made a difference, otterbox just seems like it sits on top protector better. The case seems to lack screen protection though, the raised edge on top and bottom of screen is only about 1/16 thick. I've never broke a phone but this might be a deal breakerbreaker for some.
I don't have a way of taking taking a pic right now, but I have the Spigen Tough Armor on my GS7E with a Skinomi MatteSkin screen protector.
The Skin has may be 1-2 mm taller than optimal, I have just the slightest push from the case on the top of the skin, but that could also be my fault for not as well aligning the skin as possible. Tough call. I'll probably be putting a new skin on this week anyway just because I'm OCD about it.
addendum 2016/3/23: replaced the MatteSkin last night and put the Tough Armor back on this morning. Alignment seems good. One 'speck' maybe under the skin near the top under the Samsung logo, you'll see some squiggles there where I was working against it this morning to see if it was a bubble that could be pushed out. {shrug}
Fit between the two seems *tight* but *may* be good or great.
After putting the Tough Armor back on I got some push against the bottom left edge of the MatteSkin but a few passes with a spudger seems to have smoothed it back out. See if it stays.
The inner edge of the Tough Armor on the front top/bottom seems tight and sharp-edged where it meets the phone. If this was backed off 0.5mm-ish there would definitely be no issue.
I know some don't like how much the Tough Armor stiffens up the buttons on the sides, but that works in my favor as it cuts down on unintended activation when the phone is in a backpack or pocket, and the shape of the Armor edge makes for a nice flat stance when using the kickstand or otherwise leaning on the side.
Final word: 97% perfect fit. The case ended up pushing the bottom of the screen protector a bit, the inner most lip edges on the Tough Armor was about 1 mm too far to play nice with the MatteSkin. Trimming the edge of the case with a sharp knife though does resolve it, if you can do that with a truly even hand it probably would be a great combo, my hand isn't that perfect so I had a bit of an irregular edge. Worked well though, otherwise.
I'm currently using the IQ Shield HD Wet screen protector:
http://www.amazon.com/gp/product/B01BG2EJYS?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
With the SUPCASE Unicorn Beetle Rugged Full Body Case:
http://www.amazon.com/SUPCASE-Full-...sr=1-1&keywords=galaxy+s7+edge+unicorn+beetle
I just received the Tech21 Frame case in the mail so will be seeing if that works well with the screen protector. Unfortunately I have heard it doesn't but here's to hoping.
Update: Tech21 Frame case will indeed push up on the edges of the screen protector.
The best screen protector I have used to date is from bestskinsever and their customer service is top notch. It isn't noticble at all and the cutouts are scary accurate.
I have ordered some from xtremeguard and the cutouts are too big and I ended up tossing them. The other brand I tried was some from illumni and they scratch up real easy, the fit was better than extremeguard but not by that much and their customer service sucked.
http://www.bestskinsever.com/samsung-galaxy-s7-skin
Here's the Symmetry with the Bodyguardz HD curved.
ipaq_101 said:
The best screen protector I have used to date is from bestskinsever and their customer service is top notch. It isn't noticble at all and the cutouts are scary accurate.
I have ordered some from xtremeguard and the cutouts are too big and I ended up tossing them. The other brand I tried was some from illumni and they scratch up real easy, the fit was better than extremeguard but not by that much and their customer service sucked.
http://www.bestskinsever.com/samsung-galaxy-s7-skin
Click to expand...
Click to collapse
I just ordered the case friendly and edge to edge to see which one I like better. I agree, their screen protectors are top notch.
Zagg HD Dry + Speck Candyshell Clear
Only been on 24 hrs but it looks like a win so far. Both are seriously good quality products, but then they better be for the price.
Galaxy S7 Edge Case, Spigen® [Ultra Hybrid] AIR CUSHION [Crystal Clear] Clear back panel + TPU bumper for Samsung Galaxy S7 Edge (2016) - 556CS20034 with the hollow bumpers in the corner works well with screenknight protector.
Obliq Naked Shield Black + ArmorSuit MilitaryShield FullScreen Extreme Clarity HD
Case : Obliq Naked Shield
Screen : ArmorSuit MilitaryShield
While I like the look of the Skinomi MatteSkin on the screen I wanted to try something else, for comparison. So I got the ArmorSuit and put it on, along with the Obliq case - changing over from a more stealth to more bling kind of look, truly.
Both the case and shield are a very nice fit for the device. Not as large nor thick as the Tough Armor I had been using, time will tell whether that's good or bad.
The ArmorSuit screen protector, once on and de-bubbled basically disappears. It's only the 1st day of use but it's very much NOT there, visually.
The Obliq case is also very lean, and the back is very clear, letting the look of the silver phone I have glare out at you.
Combined they seem to work seamlessly together. I was concerned in particular because the ArmorSuit is a full coverage, and not their case-friendly version, however in this case they seem to be working well together. I truly must have gotten lucky with the screen protector install because I literally can't see the edges of it vs the edges of the Obliq case. Nice.
The Obliq is NOT as much protection as the Tough Armor, to be sure, but it is prettier and alters the ergonomics and looks of the phone dramatically less.
The Obliq DOES appear to be a "fingerprint magnet" though ... time will tell.
The ArmorSuit does NOT appear to be a fingerprint magnet, which is nice. It is very glossy/reflective though, as a couple of the pics I've attached show.
I initially had this Roya kickstand case.. plus this tempered glass protector
I've decided to give the iq shield (not the matte one) a try per some recommendations on here.. hoping sensitivity is at least "close" to having no protector (like with regular phones + tempered).. i've had iq shield in the past and its been solid though i seem to recall sensitivity taking a hit.
I'm going with the Beetle Pro Full case (not hybrid one).. i guess its harder to get off if you use gear vr.. but i saw a rumor if you cut the bumpers off near the usb on gear vr a case may fit, unsure.
I saw the Spigen with kickstand.. it looks similar to the Beetle Pro.. can anyone comment on how slippery it is, or if its got a good grip like the Beetle Pro (full) and protects the edges too (easier to get off maybe)? Spigen appears to not have edge protection, so similar to Beetle Hybrid ($11.99 vs Spigen at $17.99).. I would think the Beetle Pro Hybrid would make more sense price wise.
I guess if you get the $99 2 year accidental damage samsung warranty then the hybrid is a no brainer.
The phone is beautiful, but all that glass...
I always keep cases and screen protectors on my phones. I am too paranoid not to.
Most likely not. I want to keep the phone as thin and compact as possible, not have sharp edges when holding it (usually on the sides or the charging/speaker cutouts), it really ruins the look and feel of the phone, and after some use the cases and screen protectors get all scratched up since it's plastic.
I'm using an otterbox on mine simply because I'm forever dropping my phone at work and don't want to damage the phone.
Yes, glass screen protector, DBrand dragon skin and clear tpu case
Sent from my Moto Z (2) using Tapatalk
already have my case and screen protectors. I have a deep sea blue spigen tough armor case, a clear spigen case and when the prices drop a little I will get an otter box commuter. still waiting on Samsung to ship my note 8......ridiculous IMO
Had to rush to get a case, didn't expect to get the phone early. Spigen thin case here and that's it for protection.
Sent from my SM-N950U using XDA-Developers Legacy app
Accidents happen so a case it will be
yes but no.
I use the Rhinoshield crash guard. Its a bumper so the front and rear are open. But they test there crash guard @ 11 ft drops.
I have one on my s8 plus and its great. And see tons of drop videos from high drop and the phone works.
So im going to stick with that.
I do like the feel of a casless phone and that is the closest i can get to it. Rather have something and not need it then need it and not have it.
I see some of you guys have a screen saver!!!
When did any brand manage to make a screen saver that worked on any Galaxy edge device? I have owned the lot and tried dozens of panzer glass, plastic, part fitting, glued and goodness knows what and have never found a satisfactory screen saver for a device with that bloomin curved edge.
To that end I always use a case then keep it in a shocksock or a wallet type case that is most annoying to use but offers all around protection. I have even paid nearly 60.00€ for the official Samsung LED cover on several of my mobiles because I can't find a screen saver. Helppppp.
Please tell me what screen saver you have found. I would be very much obliged. Thanks.
Ryland
I'm using a Spigen Neo Hybrid case, and a Spigen Neo Flex screen protector. I like the Neo Hybrid cases because they don't add much bulk and have been great for protection, even minor drops on my previous phones.
Check This One Out
Since my S8+ been using cases. Just ordered this one on Ebay.
http://www.ebay.co.uk/itm/Luxury-Ul...var=581819169631&_trksid=p2057872.m2749.l2648
All ways, outer box, Note 3 & 4 still look Like New!
Sent from my trltespr using XDA-Developers Legacy app
I got 2 (probably only will keep one):
Ringke Onyx ($4)
Caseology Vault ($5)
Both TPU, which is my preference. I love the corner coverage for little bumps and falls. I have never had issues with breaking phones so it's just a little peace of mind for me.
I always get the Samsung clear case, they're nice and thin and fit will, providing some protection.
@ Ryland Johnson, try this. I have one on my s8+ and its great.
https://youtu.be/72x3E8sfzZI
Sent from my SAMSUNG-SM-P907A using XDA-Developers Legacy app
I will put a full body wet install protector film, then I will use a thin, very thin case, and on certain ocasions, an urban armor ash color, magma series case
Yes
Should I get the UAG Monarch. Ghostek Nautical, or the ARMOR-X case? I can't decide but I want the best protection I can get, if there is any alternatives I would love to know what they are!
Thanks
ytsu12 said:
Should I get the UAG Monarch. Ghostek Nautical, or the ARMOR-X case? I can't decide but I want the best protection I can get, if there is any alternatives I would love to know what they are!
Thanks
Click to expand...
Click to collapse
Decided to go with the Ghostek Nautical. It's a nice case with excellent protection, including an integrated screen saver. The two downsides are that the S-Pen is very difficult to remove and headphone use requires an extender, which dose not come with the case. It reminds me of the Otterbox Galaxy S7 Edge case that had an integrated screen protector.
I've seen at least three other cases with integrated screen savers (all available through Amazon) but have no experience with these:
1) Love Mei Water Resistant Shockproof Aluminum Metal Super Anti Shake Silicone Fully Body Protection for Samsung Galaxy Note 8
2) Samsung Galaxy Note 8 Case, SUPCASE Full-body Rugged Holster Case with Built-in Screen Protector for Galaxy Note 8
3) i-Blason Galaxy Note 8 Case, Shock Reduction / Full body Bumper Case with Built-in Screen Protector for Samsung Galaxy Note 8
I have the UAG Monarch on order. I've been using their cases with every single phone that had one available for as long as I can remember. I always had their standard cases (now called Pathfinder) but they apparently aren't making those for the Note 8 and I hate the transparent cases. So this is my first Monarch, I'm sure I'll love it just the same.
I have the Ghostek Nautical. It's not to great to be honest.
The photos when using flash are blurry and have the halo light effect.
You cannot get the S-Pen out unless you have small fingers or use another object to try to remove it.
It's kind of depressing because this case was awesome for my galaxy s8. Only reason why I decided to use it for my note 8.
I got a Nautical, and honestly its not worth anything near the amount sold for.
The one i got the power button did not work unless you hit it with a hammer. The fingerprint cut out was not aligned with the phone. The plastic feels cheap. and due to a reflection from the case, its impossible to take a photo with flash with the cover on.
Highly disappointed.
ytsu12 said:
Should I get the UAG Monarch. Ghostek Nautical, or the ARMOR-X case? I can't decide but I want the best protection I can get, if there is any alternatives I would love to know what they are!
Thanks
Click to expand...
Click to collapse
I'd say go with the OtterBox Defender, tried and true. If you are paying $60 for a case might as well go with the Defender.
I understand wanting to protect the phone, but looking at these cases they are unbelievably bulky. Sturdy yes but wow, the added bulk. What are you guys doing with your phones that you need such a massive case? I'm genuinely curious as my last case was a Bear Motion for the Pixel and it didn't even cover the top and bottom. And even now I'm only using the Rinke smoke TPU case.
Notasaurus said:
I understand wanting to protect the phone, but looking at these cases they are unbelievably bulky. Sturdy yes but wow, the added bulk. What are you guys doing with your phones that you need such a massive case? I'm genuinely curious as my last case was a Bear Motion for the Pixel and it didn't even cover the top and bottom. And even now I'm only using the Rinke smoke TPU case.
Click to expand...
Click to collapse
I have a thick protective case instead of paying monthly then a deductive for insurance, especially nowadays that everything is glass the phones are too vulnerable to drops. Sure I'd love to rock the phone "naked" and show off the amazing design but if I dropped it I would be extremely pissed I just broke a $1000 phone.
I don't understand why some find it to be a problem that others want to protect their 1000 dollar investment some ppl work in accident prone jobs we need protection I don't like spending multiple 1000s repeatedly.
Sent from my SM-N950U using XDA-Developers Legacy app
I bought a Ghostek Nautical for my Galaxy Note 9. The s-pen cover does not close. After complaining to Ghostek and demanding a replacement case or refund, Ghostek agreed to send a replacement. It took two months to arrive. The s-pen cover on the replacement case also doesn't close. Don't waste money on their case..
I just got a OnePlus 8T+ 5G today ( T-Mobile ) and need to get a case. For my last two phones, I have used UAG and I have been happy with them. Reading the specs, it seems like Otterbox has testing above and beyond what UAG does (milspec) so I am considering that option too, but the back of the Otterbox cases feels a bit smoother and less grippy than UAG.
Two options I am considering:
Sites-ob_us-Site
OtterBox cases, power, screen protection, and accessories protect and empower your digital world.
www.otterbox.com
Monarch Series Cases | Urban Armor Gear
The UAG Monarch Series protective cases are the most rugged and durable on the market. They offer military drop-test protection for all your Apple, Samsung, Huawei, Motorola, Google, Microsoft, HP, and LG products.
www.urbanarmorgear.com
Only $10 price difference, so that isn't a factor. My main concern is protecting the phone. The UAG seems to provide good protection and feels a bit more grippy than the Otterbox, but I know Otterbox is a known solid design.
Any thoughts on those two?
I have both. I'm kind of a case hoarder, trying to find the perfect case. I drop my phone often because my hands randomly spasm.
Which case is better comes down to 1 question: will you be using anything other than your phone in the case?
The OtterBox + glass screen protector did well. The UAG + screen protector didn't do nearly as well. It broke more often, faster.
If you're sticking anything additional in, like a thin metal plate for sticking to magnetic holders like you put in your car, it will be too thick for either case. I rather like using a lanyard and found this thin pad that sits behind a phone and had a strap coming out the charging hole of your case with a small keychain loop....even that's too thick. The metal sheet or my thin pad causes the screen protector to protrude too far out from the case. 1 drop and they'll break.
Bare phone, either will work very well.
If I had to pick between them protection wise, the OtterBox probably has it.
If you have your heart set on the UAG, I have a better suggestion: get the Poetic Affinity case. It's less than half the price and better IMO than the UAG.
Poetic Affinity Series Designed for OnePlus 8T Case, Rugged Lightweight Military Grade Hybrid Protective Bumper Cover, Clear : Amazon.ca: Electronics
Poetic Affinity Series Designed for OnePlus 8T Case, Rugged Lightweight Military Grade Hybrid Protective Bumper Cover, Clear : Amazon.ca: Electronics
www.amazon.ca
A case very similar to the OtterBox but maybe with BETTER protection is the Spigen Tough Armor. It has these yellow foam pads inside, and is similar to hold. It's technically 2 pieces but in the real world it appears very very similar to OtterBox if not better.
Amazon.com: Spigen Tough Armor Designed for Oneplus 8T Case (2020) - Black: Electronics
Buy Spigen Tough Armor Designed for Oneplus 8T Case (2020) - Black: Basic Cases - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
Virtually every single case has the same flaw though: there is a very bad soft spot in the case...every case....over the ring mode selector slider (silent\vibrate\ring). Some cases it's not quite as bad than others. But it's been present on every case I've tried except 2. And those cases fixed the issue by sandwiching the phone in between 2 hard pieces:
One was a heavy as hell all metal case that's a MONSTER in size and weight, and most people will hate, but does an incredible job protecting the phone. And it uses any old 3rd party glass screen protector. Your floor will be dented by falls, not your phone! (this is currently my case).
Amazon.com: Feitenn Oneplus 8T Metal Case, Oneplus 8T Case Heavy Duty, Hard Cover Armor Military Bumper Shockproof Defenderr Protective Soft Rubber Men Gift Outdoor with Screen Protector for Oneplus 8T - Black
Amazon.com: Feitenn Oneplus 8T Metal Case, Oneplus 8T Case Heavy Duty, Hard Cover Armor Military Bumper Shockproof Defenderr Protective Soft Rubber Men Gift Outdoor with Screen Protector for Oneplus 8T - Black
www.amazon.com
The other is the Supcase Unicorn Beetle Pro... an all plastic case that doesn't let you use a glass screen protector, you have to use their built in thin film screen protector that SUCKS and makes the case useless. It doesn't have the so called soft spot. But the lack of glass screen protector kills it for me.
It does come with a not so great belt holster though if anyone wants that.
Amazon.com: SUPCASE Unicorn Beetle Pro Series Case Designed for OnePlus 8T (2020), Full-Body Rugged Holster Case with Built-in Screen Protector for OnePlus 8T 5G (Tilt)
Buy SUPCASE Unicorn Beetle Pro Series Case Designed for OnePlus 8T (2020), Full-Body Rugged Holster Case with Built-in Screen Protector for OnePlus 8T 5G (Tilt): Holsters - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
cookiemonster79 said:
I just got a OnePlus 8T+ 5G today ( T-Mobile ) and need to get a case. For my last two phones, I have used UAG and I have been happy with them. Reading the specs, it seems like Otterbox has testing above and beyond what UAG does (milspec) so I am considering that option too, but the back of the Otterbox cases feels a bit smoother and less grippy than UAG.
Two options I am considering:
Sites-ob_us-Site
OtterBox cases, power, screen protection, and accessories protect and empower your digital world.
www.otterbox.com
Monarch Series Cases | Urban Armor Gear
The UAG Monarch Series protective cases are the most rugged and durable on the market. They offer military drop-test protection for all your Apple, Samsung, Huawei, Motorola, Google, Microsoft, HP, and LG products.
www.urbanarmorgear.com
Only $10 price difference, so that isn't a factor. My main concern is protecting the phone. The UAG seems to provide good protection and feels a bit more grippy than the Otterbox, but I know Otterbox is a known solid design.
Any thoughts on those two?
Click to expand...
Click to collapse
The UAG is available on Amazon
However the case doesnt really protect the screen the lips are not raise enough.
Its too Flush
I choose the Poetic Affinity instead not only its cheaper
the lips in the front actually protect the screen
hoodred said:
The UAG is available on Amazon
However the case doesnt really protect the screen the lips are not raise enough.
Its too Flush
I choose the Poetic Affinity instead not only its cheaper
the lips in the front actually protect the screen
Click to expand...
Click to collapse
Idk what case you're talking about but I have the uag case on my 8t and the edges stick up above the sides of the screen where if I lay it down screen first the screen doesn't touch the surface
rcummings100 said:
If you have your heart set on the UAG, I have a better suggestion: get the Poetic Affinity case. It's less than half the price and better IMO than the UAG.
Click to expand...
Click to collapse
If the Poetic Affinity for the 8t is anything like the one on the 3t, that thing can take a beating
IMO i have had multiple (4) phones (samsung, oneplus and pixel) and I have used uag with a dbrand skin underneath and it's always been an awesome mix for looks for me
spart0n said:
Idk what case you're talking about but I have the uag case on my 8t and the edges stick up above the sides of the screen where if I lay it down screen first the screen doesn't touch the surface
Click to expand...
Click to collapse
Not as high as Poetic.
UAG Lips raised only top,bottom and about 1/5 on the sides.
Poetic all edges top, bottom and both sides lips are raised.
hoodred said:
The UAG is available on Amazon
However the case doesnt really protect the screen the lips are not raise enough.
Its too Flush
I choose the Poetic Affinity instead not only its cheaper
the lips in the front actually protect the screen
Click to expand...
Click to collapse
Hey, I'm thinking of taking affinity or uag, depending on this following question: do poetic cases get yellow over time?
*I found something on google that says that uag plasma cases stay pure transparent, but nothing useful about poetic
cutade said:
Hey, I'm thinking of taking affinity or uag, depending on this following question: do poetic cases get yellow over time?
*I found something on google that says that uag plasma cases stay pure transparent, but nothing useful about poetic
Click to expand...
Click to collapse
I've still got an old note 8 still in the uag case from day 1 and it hasn't changed color at all.
cookiemonster79 said:
I just got a OnePlus 8T+ 5G today ( T-Mobile ) and need to get a case. For my last two phones, I have used UAG and I have been happy with them. Reading the specs, it seems like Otterbox has testing above and beyond what UAG does (milspec) so I am considering that option too, but the back of the Otterbox cases feels a bit smoother and less grippy than UAG.
Two options I am considering:
Sites-ob_us-Site
OtterBox cases, power, screen protection, and accessories protect and empower your digital world.
www.otterbox.com
Monarch Series Cases | Urban Armor Gear
The UAG Monarch Series protective cases are the most rugged and durable on the market. They offer military drop-test protection for all your Apple, Samsung, Huawei, Motorola, Google, Microsoft, HP, and LG products.
www.urbanarmorgear.com
Only $10 price difference, so that isn't a factor. My main concern is protecting the phone. The UAG seems to provide good protection and feels a bit more grippy than the Otterbox, but I know Otterbox is a known solid design.
Any thoughts on those two?
Click to expand...
Click to collapse
Over the past 8 year I’ve had 5 otterbox defenders. They all served well. My biggest issue with them is there is always going to be a thin section that always breaks over time. That all truly depends on how much it drops and how hard it drops. Some of them come with their own screen protection which can be convenient but also annoying. They don’t bind to the screen so it can cause unresponsive touches. Otterboxes do come with port covers to protect from dust.
I tried out UAG 2.5 years ago and it outlasted all of my otter boxes. And it’s still going strong. It barely even has a scratch on it. It’s been accidentally ran over by a Ford 150 too lol. Nothing is breaking on it. Nothing is warped. It’s taken harder falls than all my otterboxes and it is still perfectly intact. UAG does not come dust covers. I will point out that the dust covers fall apart and they damage your phone chargers because they always push on them. Dust covers can also damage your ports because it’s pushing your chargers on the side of them. I’ve had 2 charge ports go bad because of that. Newer phones now are waterproof/water resistant so it won’t hurt your phone just to wash the dust out. So to be honest dust covers are not necessary and are more inconvenient now.
My personal preference is a UAG + Zagg screen protector. Zaggs have a lifetime warranty. You buy one and it’s good for the remainder of the phone’s life or if you buy another phone that is compatible to it. Iphone 11 and 12s use the same protector size.
I dropped using otterboxes when I discovered UAGs. They are the toughest phone cases I’ve ever had. I even had Specks that were more durable than my otterboxes. Otterboxes cost more and seem to be a lot less durable from my experience.
rcummings100 said:
Virtually every single case has the same flaw though: there is a very bad soft spot in the case...every case....over the ring mode selector slider (silent\vibrate\ring). Some cases it's not quite as bad than others. But it's been present on every case I've tried except 2. And those cases fixed the issue by sandwiching the phone in between 2 hard pieces:
One was a heavy as hell all metal case that's a MONSTER in size and weight, and most people will hate, but does an incredible job protecting the phone. And it uses any old 3rd party glass screen protector. Your floor will be dented by falls, not your phone! (this is currently my case).
Amazon.com: Feitenn Oneplus 8T Metal Case, Oneplus 8T Case Heavy Duty, Hard Cover Armor Military Bumper Shockproof Defenderr Protective Soft Rubber Men Gift Outdoor with Screen Protector for Oneplus 8T - Black
Amazon.com: Feitenn Oneplus 8T Metal Case, Oneplus 8T Case Heavy Duty, Hard Cover Armor Military Bumper Shockproof Defenderr Protective Soft Rubber Men Gift Outdoor with Screen Protector for Oneplus 8T - Black
www.amazon.com
Click to expand...
Click to collapse
I'm currently on a search for a rugged case and came across your post. Are you still using the metal case? If so, do you mind giving us a quick recap of how it's holding up after all these months? and would you recommend it over other cases?
Thanks!
gravewormx said:
I'm currently on a search for a rugged case and came across your post. Are you still using the metal case? If so, do you mind giving us a quick recap of how it's holding up after all these months? and would you recommend it over other cases?
Thanks!
Click to expand...
Click to collapse
don't do metal unless you want signal issues!
I recommend: https://www.supcase.com/products/oneplus-8t-unicorn-beetle-pro-full-body-case-black