Database Develop

[HELP] Unbrick RAZR i X890

Hi people, I have a big problem with my friend's Razr i, I was trying to root it, but i didn't want to unlock my bootloader so tried several methods but not a single one worked, So i tried the one for unlocked bootloaders and ended up bricking my device, Now It's stuck on fastboot mode.
I've tried to flash some brazilian firmwares via RSD lite, but it get stuck on "6/9 flashing radio_signed" SO PLEASE SOMEONE GUIDE ME TO THE SOLUTION WHAT AM I DOING WRONG?
PS: Also tried to flash an argentinian Firmware but it didn't even let me start flashing bringing the error "Faled flashing process. Unknown fastboot command. (getvar)"
PS2: Also tried the eternityprj Alternate method without RSD, and it gets stuck on flashing recovery... and it also prompts some errors you can see in the attached file.
HELP ME PLEASE AS I SAID THE RAZR IS A FRIEND'S PHONE NOT MINE, I NEED TO SAVE IT.

Vaizen said:
Hi people, I have a big problem with my friend's Razr i, I was trying to root it, but i didn't want to unlock my bootloader so tried several methods but not a single one worked, So i tried the one for unlocked bootloaders and ended up bricking my device, Now It's stuck on fastboot mode.
I've tried to flash some brazilian firmwares via RSD lite, but it get stuck on "6/9 flashing radio_signed" SO PLEASE SOMEONE GUIDE ME TO THE SOLUTION WHAT AM I DOING WRONG?
PS: Also tried to flash an argentinian Firmware but it didn't even let me start flashing bringing the error "Faled flashing process. Unknown fastboot command. (getvar)"
PS2: Also tried the eternityprj Alternate method without RSD, and it gets stuck on flashing recovery... and it also prompts some errors you can see in the attached file.
HELP ME PLEASE AS I SAID THE RAZR IS A FRIEND'S PHONE NOT MINE, I NEED TO SAVE IT.
Click to expand...
Click to collapse
your secure level was to high for a non bootloader method and if you done a method with a unlocked bootloader and your bootloader was locked thats bad.
unlock your bootloader >>WARRANTY VOID<< install cwm and use any backup. or flash the 39 gb fw but i think you have yet to unlokc the bootloader to safe it.. and be patient dont try to much stuff if your battery goes low you need a factory adapter or something like this to charge ur razr i if the battery is down.
regards hope you get it waorking again

I solved my problem this way
Vaizen said:
Hi people, I have a big problem with my friend's Razr i, I was trying to root it, but i didn't want to unlock my bootloader so tried several methods but not a single one worked, So i tried the one for unlocked bootloaders and ended up bricking my device, Now It's stuck on fastboot mode.
I've tried to flash some brazilian firmwares via RSD lite, but it get stuck on "6/9 flashing radio_signed" SO PLEASE SOMEONE GUIDE ME TO THE SOLUTION WHAT AM I DOING WRONG?
PS: Also tried to flash an argentinian Firmware but it didn't even let me start flashing bringing the error "Faled flashing process. Unknown fastboot command. (getvar)"
PS2: Also tried the eternityprj Alternate method without RSD, and it gets stuck on flashing recovery... and it also prompts some errors you can see in the attached file.
HELP ME PLEASE AS I SAID THE RAZR IS A FRIEND'S PHONE NOT MINE, I NEED TO SAVE IT.
Click to expand...
Click to collapse
Hello good morning
I brick 2 phones trying to get one of them and in the process did fail at 2, how the recovery?
1. - Use RSD Lite version 6.1.4
2. - Use 1 extra phone (htc wildfire root and backup CWMR in case of failure)
3. - Use a GB retail rom (CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSRTGB_P042_A005_S1FF_fb.xml)
4. - The phone to unbrick, put fastboot mode, switching on via the power button and vol (-) until the fastboot mode screen read "fastboot reason:" if it does not, re-try until there is
5. should not say "fastboot reason: flash failure, or anything else xxxxxx xxxx xxxxx ............"
6. - Boot rsd lite 6.1.4, select retail rom, and indicate that only "unzip" connects your motorola razr I, and it connects back to the other phone (in my case htc wildfire), which has a debug mode enabled.
7. - Note, that in the window of the Rsd Lite in row 1, the Razr I phone is detected, then you start flashing in RSD Lite 6.1.4, see screenshot of your razr I to see that data is being sent, (the other phone should not be affected and only serves as a decoy to usb drivers, Rsd lite at least do not damage to my phone)
8. - Remember flashing erase the card was in your internal Razr I therefore will lose programs, photos or music you had or downloaded to the SD or internal virtual
9. - Flashing can stop and have to do everything again, but remember that no fastboot mode screen should read:
"fastboot reason: flash failure or otherwise else xxxxxx xxxxxxx ......." must be clean that is just:
"fastboot reason: "
luck : Good:
Warning, do not take responsibility for any damage to your cell involved in the process, ......... the lure of the phone can be found on youtube and just suits the way because of my need to get my phone ........ in no way am programmer or software developer, for which only comment what turned out ok to me
excuse my bad English

jacbarahona72 said:
Hello good morning
I brick 2 phones trying to get one of them and in the process did fail at 2, how the recovery?
1. - Use RSD Lite version 6.1.4
2. - Use 1 extra phone (htc wildfire root and backup CWMR in case of failure)
3. - Use a GB retail rom (CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSRTGB_P042_A005_S1FF_fb.xml)
4. - The phone to unbrick, put fastboot mode, switching on via the power button and vol (-) until the fastboot mode screen read "fastboot reason:" if it does not, re-try until there is
5. should not say "fastboot reason: flash failure, or anything else xxxxxx xxxx xxxxx ............"
6. - Boot rsd lite 6.1.4, select retail rom, and indicate that only "unzip" connects your motorola razr I, and it connects back to the other phone (in my case htc wildfire), which has a debug mode enabled.
7. - Note, that in the window of the Rsd Lite in row 1, the Razr I phone is detected, then you start flashing in RSD Lite 6.1.4, see screenshot of your razr I to see that data is being sent, (the other phone should not be affected and only serves as a decoy to usb drivers, Rsd lite at least do not damage to my phone)
8. - Remember flashing erase the card was in your internal Razr I therefore will lose programs, photos or music you had or downloaded to the SD or internal virtual
9. - Flashing can stop and have to do everything again, but remember that no fastboot mode screen should read:
"fastboot reason: flash failure or otherwise cuarquier xxxxxx xxxxxxx ......." must be clean that is just:
"fastboot reason: "
luck : Good:
Warning, do not take responsibility for any damage to your cell involved in the process, ......... the lure of the phone can be found on youtube and just suits the way because of my need to get my phone ........ in no way am programmer or software developer, for which only comment what turned out ok to me
excuse my bad English
Click to expand...
Click to collapse
Could PM Me with the instructions in spanish, there are some things that i do not understand in your english
Tried to use your method but RSD lite got stuck on "4/11 erase userdata" and the phone says "program dummy sp block for userdata" I don't thin I understood well the part of the second phone, does it have to be on, i mean normal on, or does it have to be in flashmode aswell?

bricked my Mi5

Hello!
Was using 7.2.8.0 ROM out of box.
Tried to update to developer 6.5.19 but something went wrong. Now only fastboot/recovery works. Can't do fastboot oem edl - tells me it should be unlocked. Same problem with fastboot flash system - tells me device is locked. Me PC Suite doesnt recognize device at all. Tried on my laptop and PC. Help please.

any1?

Are you logged into your Mi Account on the phone? If yes I guess you have to wait for bootloader unlock and then flash rom with fastboot.

I logged in last time my phone worked.

The unlock procedure uses my phone and it cannot start so I will be unable to unlock it since only fastboot and recovery modes are available.

any other suggestions?

apply for the bootloader unlock code with your mi account (use other phone while you fix the xiaomi), wait for the unlock approval sms code, its tooks like 7 to 15 days, then download the software for the unlock bootloader process, loggin with your approved mi account, put your phone in fastboot mode, connect it to the pc press start and thats all (no need to boot in normal mode for unlock), you should have your bootloader unlocked and you will be able to enter in EDL mode and flash again the rom.
P.D. Sorry for my bad english

MiuiPTY said:
apply for the bootloader unlock code with your mi account (use other phone while you fix the xiaomi), wait for the unlock approval sms code, its tooks like 7 to 15 days, then download the software for the unlock bootloader process, loggin with your approved mi account, put your phone in fastboot mode, connect it to the pc press start and thats all (no need to boot in normal mode for unlock), you should have your bootloader unlocked and you will be able to enter in EDL mode and flash again the rom.
P.D. Sorry for my bad english
Click to expand...
Click to collapse
That's pretty much exactly what I wrote in my post XD

Have you try to flash using MiFlash?
You can download it from here
My friend also encounter this problem and what he did is:
1. Use a fresh installed notebook with Win 7
2. Use MiFlash to flash the image file.
Image file can be downloaded from here.
It should works with locked bootloader as you are flashing the stock image.
Please give it a try.

Any luck alien2k1?
I'm in the same boat, bricked Mi 5, can access bootloader and TWRP recovery, but can't turn phone on because of bootloop. I want to use Mi PC Suite to flash the fastboot rom. But, when my phone is in Fastboot mode, and I connect it to the computer with the micro USB, it says "Try connect in normal mode first then switch" . But my phone is stuck in a bootloop and I can't "connect in normal mode first." It can't detect my phone in Fastboot mode, and it can't detect my phone in "normal mode" because I can't turn the phone on in normal mode because it gets stuck in a bootloop.
My bootloader is unlocked.
I can't open MiFlash either and I can't turn on USB debugging on the phone because its stuck in a bootloop. What should I do?

wonderboy6 said:
Any luck alien2k1?
I'm in the same boat, bricked Mi 5, can access bootloader and TWRP recovery, but can't turn phone on because of bootloop. I want to use Mi PC Suite to flash the fastboot rom. But, when my phone is in Fastboot mode, and I connect it to the computer with the micro USB, it says "Try connect in normal mode first then switch" . But my phone is stuck in a bootloop and I can't "connect in normal mode first." It can't detect my phone in Fastboot mode, and it can't detect my phone in "normal mode" because I can't turn the phone on in normal mode because it gets stuck in a bootloop.
My bootloader is unlocked.
I can't open MiFlash either and I can't turn on USB debugging on the phone because its stuck in a bootloop. What should I do?
Click to expand...
Click to collapse
If you're on unlocked bootloader and can access fastboot, why don't you use the fastboot packages? There's a script provided by them in the fastboot downloads to flash everything
Sent from my MI 5 using Tapatalk

wonderboy6 said:
Any luck alien2k1?
I'm in the same boat, bricked Mi 5, can access bootloader and TWRP recovery, but can't turn phone on because of bootloop. I want to use Mi PC Suite to flash the fastboot rom. But, when my phone is in Fastboot mode, and I connect it to the computer with the micro USB, it says "Try connect in normal mode first then switch" . But my phone is stuck in a bootloop and I can't "connect in normal mode first." It can't detect my phone in Fastboot mode, and it can't detect my phone in "normal mode" because I can't turn the phone on in normal mode because it gets stuck in a bootloop.
My bootloader is unlocked.
I can't open MiFlash either and I can't turn on USB debugging on the phone because its stuck in a bootloop. What should I do?
Click to expand...
Click to collapse
Have you tried to install MIUI8 ?

wonderboy6 said:
Any luck alien2k1?
I'm in the same boat, bricked Mi 5, can access bootloader and TWRP recovery, but can't turn phone on because of bootloop. I want to use Mi PC Suite to flash the fastboot rom. But, when my phone is in Fastboot mode, and I connect it to the computer with the micro USB, it says "Try connect in normal mode first then switch" . But my phone is stuck in a bootloop and I can't "connect in normal mode first." It can't detect my phone in Fastboot mode, and it can't detect my phone in "normal mode" because I can't turn the phone on in normal mode because it gets stuck in a bootloop.
My bootloader is unlocked.
I can't open MiFlash either and I can't turn on USB debugging on the phone because its stuck in a bootloop. What should I do?
Click to expand...
Click to collapse
I am in the same ****in situation, have you solved your issue ?
thanks

Looks like everyone is in the same boat here. I have tried several methods but the Redmi Note4 wont work. Mi PCSUIT wouldnt detect my phone either. Fastboot wont work with the message "Try connect in normal mode and then switch." I am wonder what is the sure and final solution to this problem. The issue is flashing all over the internet but no specific solutions yet.
If you have any working solution, please share. Thanks

iXanza said:
If you're on unlocked bootloader and can access fastboot, why don't you use the fastboot packages? There's a script provided by them in the fastboot downloads to flash everything
Sent from my MI 5 using Tapatalk
Click to expand...
Click to collapse
thankful, you open my eyes!

[Help][Urgent]Bricked Lumia 625 by installing corrupted mbn.

Sorry everyone but i have hard bricked my lumia now in it nothing shows totally blank screen.
i know tht it is easy to solve but it is not in QHS USB mode it is in android mode!!
In device manager when i see list of connected device i see device named Android. its because i flashed lumia 525 mbn bin for fastboot mode.
I flashed things shown here http://winphonehub.org/how-to-install-android-7-1-on-lumia-520/ and bricked my phone ending it
But i can still boot into mass storage mode but i am confused i removed EFIESP paritation in windows explorer and have a backup of it in my windows(Old working windowsphone backup) and copied working efiesp paritation but now it still doesnt work.
I have backup of my phone before flashing that mbn file actually i flashed mbn file and now my phone is bricked.
Please help,

But how can i restore gpt?
i only flashed lk bootloader.

Yes i see android

Can fix

No i dont have fastboot installed on my pc

H3Aket said:
No i dont have fastboot installed on my pc
Click to expand...
Click to collapse
You will need install fastboot

Actually i installed minimal adb and fastboot but it doesnt detect my phone.

[HELP]Soft Brickerd XT1058 + Can't flash anything

Hi guys, first of all, thanks for all the help that you guys from here always give me.
For my problem:
This phone was in the latest version (5.1), i've downgraded to 4.4.4 via RSD Lite. I was updating via OTA to 5.1 again, when it was fineshed upgrading (the battery was 100%) the phone reset in fastboot with error "Invalid CID" so i came here and find an answer to only flash again via RSD the 4.4.4 and it would be fine. So i tryed it, but can't flash anything anymore, always returns error... via RSD, via fastboot and everyhing i tryed to flash into.
In PC it recognize as "mot single adb interface", so it is softbricked... i saw a tutorial to recover hardbricked, regarding to flash a blank bootloader via qflash, but i cant get the com port that it is using...
Can I get flash this blank bootloader from fastboot?
Any other ideas how to recover this baby phone?
Thx in advance

Fastboot can't detect my unlocked device

Hi I have a problem where my pc does not detect my unlocked device in fastboot. This is a problem because I tried to update from global V10.3.3.0 to miui 11 but that did not work probably because there is not the right recovery on the device. So I can not get into the recovery and I can not get into the system this would of course be no problem because I can get into fastboot but my computer wont detect my device. How can I get my 9t pro to be detected in fastboot?
My device is unlocked. I did all that some time ago and it says so when I try to boot into system or recovery.
USB debugging is on. Idk if that is still there because I did try to update the system to miui11 but it was not detecting my phone in fastboot even before I did that update.
When I connected my phone to my computer when the system still worked I could use "adb devices" and that worked
I could also transfer files and stuff when my phone was connected to my laptop
So only when in fastboot my unlocked device is not detected if it was I could get back up there.
I really hope that this is some driver problem or something. Please help
Edit:
So at this point magically the system worked again! But I still can not use fastboot

I seem to have this problem:
https://forum.xda-developers.com/k20-pro/help/broken-fastboot-t3972697