Hi guys
I have a similar situation to this going on
http://forum.xda-developers.com/asc...nformation-t2908514/post56081582#post56081582
and when I go into fastboot/recovery menu I get phone locked and I cant unlock it to flash roms
Tried various methods to unlock without luck,
any suggestions?
Why nobody tried to read ....
Okay lets us start.......
Wich Firmware on this phone?
@fengqiu, you have to get unlock code and unlock bootloader. There's no other way to unbrick device.
hmm I tried to flash myRom onto this phone. it has no firmware atm.
Okay, I will try get the unlock code....
Is that Possible to root the Device without unlock BL . Kingroot or another One klick root tool???
Sent from my EVA-L09 using XDA-Developers Legacy app
Simon G said:
Is that Possible to root the Device without unlock BL . Kingroot or another One klick root tool???
Sent from my EVA-L09 using XDA-Developers Legacy app
Click to expand...
Click to collapse
no, its not possible. you would be stuck on boot since the bootloader is locked and wont allow the phone to boot with root access on.
Hi, any news on this topic? I'd like to root my phone without unlocking the bootloader (just so I can keep the warranty)
still not possible
bisbal said:
Hi, any news on this topic? I'd like to root my phone without unlocking the bootloader (just so I can keep the warranty)
Click to expand...
Click to collapse
You can re-lock your bootloader with SRK Tool before you have to send your phone for service.
Hi to all,
my P9 PLUS bootloop on start after upgrade after UPDATE.APP with c432 noougat:
is bootloader unlocked, but when try to restore the rom(or another rom) its says that rom is not compatible.
I try to flash trwp, but don't works, only have the possibility to enter in fastboot mode.
There's a way to fully restored? or its possible install a mod rom?
it was originally L09c155, debranded to c432.
thanks in advance:fingers-crossed:
andrea_marcello said:
Hi to all,
my P9 PLUS bootloop on start after upgrade after UPDATE.APP with c432 noougat:
is bootloader unlocked, but when try to restore the rom(or another rom) its says that rom is not compatible.
I try to flash trwp, but don't works, only have the possibility to enter in fastboot mode.
There's a way to fully restored? or its possible install a mod rom?
it was originally L09c155, debranded to c432.
thanks in advance:fingers-crossed:
Click to expand...
Click to collapse
Me pasa igual lei que necesitamos un archivo backup para flashear con trwp
P9 Plus is traped in a bootloop
Hey it thems we both have the same problem: My new P9 + is also traped in a bootloop and is obviously locked. Phone locked, FRP Lock.
Huawei does not want to help because I have no HuaweiID and the product ID can no longer read.
Would be nice if anybody can help me or tell me how to proceed. I have read the entire forum here, but no solution for me, because I can not write the flash without usb-debugging. What i have done:
I wanted the old version VIE-L29C636B130 update to Nougat with EMUI5.0.
I have used the firmware finder. FF worked quite well, just not to nougat, as I wanted.
I have used the update function via SD card successful to VIE-L29C636B202.
When I started the B362, this update has hung up, has not gone through and then the bootmode has been running and showing that Android can not start. Then I tried the previous version again and this didn’t work also no more to install.
Now the phone is landed in the bootloop and I can see the phone is locked. All what I can do now is start the recovery modus (Vol- and Power Button). But there is no restore version. Phone locked, FRP Lock.
Can anybody help please ? Is root or unlock modus a solution to write the flash ?
Bomit said:
Hey it thems we both have the same problem: My new P9 + is also traped in a bootloop and is obviously locked. Phone locked, FRP Lock.
Huawei does not want to help because I have no HuaweiID and the product ID can no longer read.
Would be nice if anybody can help me or tell me how to proceed. I have read the entire forum here, but no solution for me, because I can not write the flash without usb-debugging. What i have done:
I wanted the old version VIE-L29C636B130 update to Nougat with EMUI5.0.
I have used the firmware finder. FF worked quite well, just not to nougat, as I wanted.
I have used the update function via SD card successful to VIE-L29C636B202.
When I started the B362, this update has hung up, has not gone through and then the bootmode has been running and showing that Android can not start. Then I tried the previous version again and this didn’t work also no more to install.
Now the phone is landed in the bootloop and I can see the phone is locked. All what I can do now is start the recovery modus (Vol- and Power Button). But there is no restore version. Phone locked, FRP Lock.
Can anybody help please ? Is root or unlock modus a solution to write the flash ?
Click to expand...
Click to collapse
Only solution is to use Dc Phoenix, it's a paid Service but it should unbrick your phone.
It use a backdoor solution to flash even if the frp and bootloader is locked.
Sent from my VIE-L29 using XDA Labs
Mostar088 said:
Only solution is to use Dc Phoenix, it's a paid Service but it should unbrick your phone.
It use a backdoor solution to flash even if the frp and bootloader is locked.
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
Thank you, I thought about dc Phoenix, but i was not sure if this service is serious.
You mean my phone is bricked?
I thought about sending the phone back to Huawei. Waranty ?
Bomit said:
Thank you, I thought about dc Phoenix, but i was not sure if this service is serious.
You mean my phone is bricked?
I thought about sending the phone back to Huawei. Waranty ?
Click to expand...
Click to collapse
U have warranty if u have not unlock bootloader. If u have your warranty can be void.
Sent from my VIE-L29 using XDA Labs
use another TWRP. it should work.
Mostar088 said:
Only solution is to use Dc Phoenix, it's a paid Service but it should unbrick your phone.
It use a backdoor solution to flash even if the frp and bootloader is locked.
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
Used to try DC-Unlocker, but themes VIE-L29 is not supported, only EVA-L29 is listet.
It´s possible to try an other version, that works ?
P9 Plus trapped in bootloop
Bomit said:
Used to try DC-Unlocker, but themes VIE-L29 is not supported, only EVA-L29 is listet.
It´s possible to try an other version, that works ?
Click to expand...
Click to collapse
Tryed DC Unlocker, its detected the phone succesfully. I can see the installed firmware, IME and so on. Unlocked the FRP - succesfully. But now i can see on the screen: FRP Lock, phone is in bootloop again. 15 credits lost.
What am i doing wrong ? What i have to do ?
Thanx a lot.
Bomit said:
Tryed DC Unlocker, its detected the phone succesfully. I can see the installed firmware, IME and so on. Unlocked the FRP - succesfully. But now i can see on the screen: FRP Lock, phone is in bootloop again. 15 credits lost.
What am i doing wrong ? What i have to do ?
Thanx a lot.
Click to expand...
Click to collapse
If u use Dc Phoenix u can flash unlimited times in 72h for 15 credits.
Sent from my VIE-L29 using XDA Labs
Mostar088 said:
If u use Dc Phoenix u can flash unlimited times in 72h for 15 credits.
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
wow Was successful with this methode from DCStreamer :good::laugh::good:
https://forum.xda-developers.com/p9/help/issue-p9-rooting-brick-t3585457#post71936805
Bomit said:
wow Was successful with this methode from DCStreamer :good::laugh::good:
https://forum.xda-developers.com/p9/help/issue-p9-rooting-brick-t3585457#post71936805
Click to expand...
Click to collapse
:good:
Sent from my VIE-L29 using XDA Labs
Today they turn to me the phone: They say that there's was a problem with CPU ID(maybe..): in fact , with a software they forced a firmware on.
the phone work, but I have problem with themes(don't works)and I cannot upgrade to nougat.
This phone exit as VIE-L09C555(Brand H3G): now is
VIE-L09C432B160
when try to update to nougat by B370(21-03) it's say ne that the software is wrong.Anyone knows how I can upgrade to nougat?
Thanks in advance
Solved
andrea_marcello said:
Today they turn to me the phone: They say that there's was a problem with CPU ID(maybe..): in fact , with a software they forced a firmware on.
the phone work, but I have problem with themes(don't works)and I cannot upgrade to nougat.
This phone exit as VIE-L09C555(Brand H3G): now is
VIE-L09C432B160
when try to update to nougat by B370(21-03) it's say ne that the software is wrong.Anyone knows how I can upgrade to nougat?
Thanks in advance
Click to expand...
Click to collapse
Ok, the problem was that the root not got well.
Rooted phone, get hw EU 432
Flashed rom B103 by update menu(by secret dialer code)
Next install upadate via OTA.
Now I have rom stock rom, with B370
Thanks to all
Hi all. So I recently bricked my device while trying to update to oreo.
What I did was rebrand my device from PRA-LA1 to PRA-AL00X(P8 Lite 2017 to Honor 8 Lite) which was required for updating to Oreo. After that, I typed in the command from TWRP to install the update.zip, but nothing happened so I rebooted my device. It boots up as Honor and my eRecovery and fastboot still works, but my bootloader locked when I rebranded.
As I'm typing this, I managed to connect to WiFi and its downloading the firmware, but what I was wondering is will it be possible again to unlock bootloader again? Because my IMEI number obviously changed since rebranding and I didn't save the unlock code so I was wondering if I manage to unbrick this device if it'll be possible to unlock bootloader again with the new IMEI. Any help will be appreciated.
Hi, guys. I have a huge problem and I'd appreciate every kind of help.
As I was planning to sell my Huawei P8 lite 2017 phone (PRA-LX1), I've decided to relock the already unlocked bl for warranty reasons.
After relock and factory reset process, the phone does not restart al all, but it gets into eRecovery mode, asking to connect to internet in order to download a new firmware.
But the problem is there is a "getting package info failed" message.
I've tried to enter in fastboot mode, and both BL and FRP are locked (green color)
I have even tried to use the dload method, but update stucks at 5%.
What can I do? I've searched a lot of pages here before I open this thread.
Thanks in advance.
you may have bl unkock code use it
I have the unlock code, but I cannot use it due to locked FRP.