Hi,so i replaced LCD in my I9515, I've been doing this with youtube tutorial. Before 1-2 weeks ago my phone boot normally but i couldnt see anything due to broken LCD. In store, guy took my battery and connected it to a naked motherboard and lcd to see if it's working. After replacment when i try to boot it's stuck on Samsung Galaxy S4 logo and wont boot further. I can go into download mode, computer and odin are seeing connected phone, but i cannot boot into recovery it's just showing blue "booting recovery" and nothing happening. When I charging it, the grey battery pops out, but when i unplug it the battery is still there like it's still connected. Sometimes when i try to turn it off when it's stuck on galaxy s4 logo it's turning off then on by itself like 2 or 3 times. Any ideas how to fix it? It's hardware or software problem? In a minutes i'll try to flash stock soft from sammobile. Phone was never rooted and no custom roms were installed.
EDIT Flashing with ODIN not solved the problem
EDIT Now phone doesnt show battery when connected just one vibrate and screen is blank, and when i try to boot it while connected it's just vibrating and still black screen. When it was connected to pc it was vibrating every 2 seconds. When I try to boot it's by itself trying to boot recovery but it's not booting and blue "recovery booting" just hang on top of screen and nothing happening.
Wrong forum ?
Related
[Q] Bricked? Stuck on either white AT&T screen or grey, frozen battery screen, no USB
While trying to install Cognition v2.2b3 via Clockworkmod (from stock at&t 2.1 froyo) something happened mid-install and my phone ended up rebooting, and I have not been able to turn it on since.
-When attempting to power on normally, phone shows white AT&T screen and hangs there
-When attaching USB, phone shows battery screen but battery is all grey and rotating progress icon is frozen. Does not appear to be charging.
-Computer does not recognize phone in any state. Latest USB drivers are installed and I have had no issues connecting via USB previously.
-Cannot get into download or recovery mode using any volume/power button combination or through adb. Also tried attaching USB with ODIN running while attempting button combinations, inserting/removing battery etc, still nothing.
Has anyone else experienced this? Anything else I should try?
Louros said:
While trying to install Cognition v2.2b3 via Clockworkmod (from stock at&t 2.1 froyo) something happened mid-install and my phone ended up rebooting, and I have not been able to turn it on since.
-When attempting to power on normally, phone shows white AT&T screen and hangs there
-When attaching USB, phone shows battery screen but battery is all grey and rotating progress icon is frozen. Does not appear to be charging.
-Computer does not recognize phone in any state. Latest USB drivers are installed and I have had no issues connecting via USB previously.
-Cannot get into download or recovery mode using any volume/power button combination or through adb. Also tried attaching USB with ODIN running while attempting button combinations, inserting/removing battery etc, still nothing.
Has anyone else experienced this? Anything else I should try?
Click to expand...
Click to collapse
Go into Download mode, hold both volume buttons down and plug your phone into USB. If it doesn't work than pull the battery and try again.
If that doesn't work keep trying until it does. I'm serious, it took me like 40 tries last night to flash stock with the 1 click and then finally get cognition running (that only took one flash)
Odin is a piece of crap, it works maybe every 10th time for me. I've never used the rom manager to install roms, always use clockwork recovery. Less to go wrong if your in recovery mode I suppose.
But literally just keep trying until it works o.0
Hi. I've experienced exactly the same this night. Try this: forum.xda-developers.com/showthread.php?t=775911 it helped instantaneously.
BTW, you really need to wait at least 10 secs after removing battery.
I have the exact same problem.
My battery screen shows up with nothing but a flash loading icon and a grey battery. When I simply turn my phone on its stuck in ATT boot screen. I tried the instructions many times trying to get into download mode but right when i put it in the battery while holding down up/down/power it simply just shows the "frozen battery charging" screen again.
HELPP
So I was using my phone normally and it suddenly turned off at around 30% battery (my battery is in a pretty bad state and I do know I have to replace it) but after leaving to charge for a bit and then turning it on it goes to the initial logo that says 'Samsung GALAXY S III Mini" and the phone doesn't go past it, it restarts infinitely and won't go past the inital logo, not even to the part where it shows up an animated blue samsung logo, I've tried infinite times doing volume-up + home button + power button and it doesn't go to the system recovery mode, it just doesn't go past the samsung SIII logo, so I've tried installing 3 different firmwares that are supposed to work through odin (Yes, the phone does boot to download mode with odin once you press volume down + home + power, but not recovery) and all of them have the same problem, it gets to the initial logo and restart infinitely, I haven't messed with the odin options (so the default 2 have always been checked), don't know what they do and every place I check out says to not mess with these options so I haven't touched them yet, so today I went to a local store and informed about my problem with the phone, they tried a new battery (just for test, didn't buy) and the phone still has the same problem, they told me I can leave it there and that they'll fix it within 1 day but I don't have the money for it right now (I believe they'll do the same thing I did?)... so that's about all I've done thus far.. what do you guys recommend me to do?
Im a newb about this stuff on installing OS/Firmware/whatever on mobile devices (never done this stuff before, only doing this because my phone has this problem) so if you're gonna tell me something please include some steps on what I should be doing!
Thanks in advance.
Hello,
i had a Galaxy Note N 7000 rooted with Cyanogenmod. It worked for a couple of months, but then it just turned off while i was using it. I could reboot, but it was stuck at a screen with a battery logo and a gray circle in the middle. I could only access Download Mode, everything else wasn't possible. So after i searched around a bit i figured out, that i should factory reset with Odin. Did that, nothing changed, still the same problem. I tried using a different .pit file, and so on. Still no change. The only thing that changed during the factory resets, was that an android logo with this blue thing in the middle showed up for like one second and then it changed back to the battery logo. This happens every minute or so. The device also only powers on, if connected to a pc or charger.
So is there anything i could do to get it working again?
Hi, so I got an A2 which has been submerged in water for a while. I was not turning on at all (just showing the white led light blinking), so I bought a new USB part and battery for it, replaced it, and now it seems to react.
However, it keeps switching between the charging logo for a second, then vibrates and shows the Android One logo (this switch goes on and on forever). I have tried the button combo to go into recovery, but as soon as the Android recovery boot logo appears, it'll still timeout into the charging logo.
Does anyone know what may be going on? Or what component to replace? (the phone was only days old when it accidentally got soaked, so everything is new and it's a shame to just throw it away)
Heya,
so I don't know where to ask besides here.
I'm a phone repair dude and I'm having a small problem.
A client brought his phone to me with the problem of it sometimes not booting, getting hot whilst charging and discharging very quick.
So, I thought maybe it's just a faulty battery.
So said, done, I changed the battery. Same problem.
I can get into download and recovery mode. Recovery is still stock.
When I try to boot it normaly from turned off state, it displays the Samsung model, followed of the Samsung logo.
After it gets to the white state of the Samsung logo, the screen flashes lighty green, screen turns black and nothing further on.
I can reboot it into download or recovery mode after.
Anyone experienced the same problem?
Edit: here's a video of it: