Related
Guys i need some help . I was trying to fix the lag on my sgs and it's broken now . I have the dowloand screen . Iam just wondering which Firmware should i use . Iam sure that the phone uses Android 2.2 . And i want to flash the original Firmware i had However i cant enter my phone . So does any one know which firmware should i flash ?
Where are you located and which provider are you subscribed to?
http://samfirmware.com will have your stock firmware available. If it isn't obvious, someone here can help identify the right one after learning the above info. Registration is required but it's a free site.
I'm assuming that you know how to use Odin?
DrMilky said:
Guys i need some help . I was trying to fix the lag on my sgs and it's broken now . I have the dowloand screen . Iam just wondering which Firmware should i use . Iam sure that the phone uses Android 2.2 . And i want to flash the original Firmware i had However i cant enter my phone . So does any one know which firmware should i flash ?
Click to expand...
Click to collapse
I had the same problem yesterday.
I used Odin v3 1.7 and the JPU with the CSC, pit 512, the pda and the phone file.
Hi
sim is detected by the i9000 galaxy s but there is no network no sigal no internet. I can see the contacts that are saved in my sim. It says no service.
PLEASE HELP ME
dude did u flash ur phone with some wrong file
No one will help u until u give some info about ur phone
like what version is it running
did u flash??
No information as said .
Is it a brand new phone .
Did you flash it and wipe your settings did you flash wrong CSC .
jje
Hello...i am having signal problems with my second hand galaxy s -international device..i know it wasn't originally bought from my country..so i was hoping there is a method to find out for which area it was deisgned so i can install a corresponding radio to improve signal... e.g india,korea,us e.t.c ..
thanks in advance!
well it is not like what you think, any rom from any location you flash on your phone it should work well, the best is try to flash a new stock rom on your phone and see what happens, roms including 3 files (pda,phone,csc) with repartition activated is recommended.
taha_e said:
well it is not like what you think, any rom from any location you flash on your phone it should work well, the best is try to flash a new stock rom on your phone and see what happens, roms including 3 files (pda,phone,csc) with repartition activated is recommended.
Click to expand...
Click to collapse
i have..multiple times..but its a reception issue, and since i tried sim on my desire z and got 2 times higher signal..it HAS to be the modem..i should use the suitable modem for the are this device was designed to be operated into..
Bump.. 10 char
You know what country you are in .
I would just flash latest modem for that area .
No point if it was an Indian Phone flashing that modem of you are in Iceland .
jje
JJEgan said:
You know what country you are in .
I would just flash latest modem for that area .
No point if it was an Indian Phone flashing that modem of you are in Iceland .
jje
Click to expand...
Click to collapse
i see!well thanks for the info..do you know if there is anything equivalent to the .ril automatcher zip file will work on galaxy s devices?its a wondermaker for my desire Z..
(post #22 http://forum.xda-developers.com/showthread.php?t=988557&page=8 )
Can anyone tell me how I can do a full factory reset which also un-roots my 8.9 3G ?
I have hooked up my tab to KIES but see not such an option in the program
Go here.
Use Odin.
File marked PDA goes in PDA slot, CSC goes in CSC slot.
http://forum.xda-developers.com/showthread.php?t=1350500
Hurrian said:
Go here.
Use Odin.
File marked PDA goes in PDA slot, CSC goes in CSC slot.
http://forum.xda-developers.com/showthread.php?t=1350500
Click to expand...
Click to collapse
I have a feeling that he wants to go back to stock firmware. The link you posted is not stock firmware for his region.
obionenairobi: if you want stock firmware for your region, send me a PM, i believe i can help you find it.
poisike said:
I have a feeling that he wants to go back to stock firmware. The link you posted is not stock firmware for his region.
obionenairobi: if you want stock firmware for your region, send me a PM, i believe i can help you find it.
Click to expand...
Click to collapse
Hi poisike, I have the same problem: want to reverse root my 8.9 and install stock firmware (Sweden). Can you please help ?
stock firmware sweden
saubartl said:
Hi poisike, I have the same problem: want to reverse root my 8.9 and install stock firmware (Sweden). Can you please help ?
Click to expand...
Click to collapse
Hi poisike I'm also looking for the stock rom to 7300 for sweden
Hi Everyone,
I'm stuck with the "enter your password" problem right after boot after flashing the "Overcome_CWM_Recovery_v5.1.2.6_P73xx.tar".
Will I be able to use Odin to recover this stock ROM "http://forum.xda-developers.com/showthread.php?t=1350500" ?
Thank you!!
jamesfx01 said:
Hi Everyone,
I'm stuck with the "enter your password" problem right after boot after flashing the "Overcome_CWM_Recovery_v5.1.2.6_P73xx.tar".
Will I be able to use Odin to recover this stock ROM "http://forum.xda-developers.com/showthread.php?t=1350500" ?
Thank you!!
Click to expand...
Click to collapse
Managed to revive it by doing the following:
1. Download the stock ROM from http://forum.xda-developers.com/showthread.php?t=1350500
2. Use Odin to restore to the stock ROM.
3. Restore to any other of your choice ROM.
Hope this helps someone!
**Note: The ROM is from the ORANGE carrier, with lotsa french apps installed.
Hi Everyone,
I'm also stuck with the "enter your password" problem right after boot after flashing. Trayed the instruczions above, bit it don't help at all...
How can i fix this?
Help please!
Never mind.
Do a factory reset from stock recovery solved the problem.
Why is Orange doing that ? ><
TheDamFr said:
Why is Orange doing that ? ><
Click to expand...
Click to collapse
What? You do know this thread is a year and a half old, right
God promised men that he'd put beautiful women in all corners of the world. Then he laughed and laughed and made the world round
hi, guys.
I'm having a mini2 with s5600 version. Am I ok to flash s5600D firmware to it?
Are the s5600 and S5600D the same?
and I managed to download the mini2 firmware from Samfirmware.
All I got it is one package S6500D firmware. 6500DLH1_S6500DCHNLH1_S6500DLH1_HOME.tar.md5
JENA_Secure_NonNFC_1109.pit and Odin3 v1.85
when I open Odin3, there is four files need to choose from. How am I supposed to use this one package?
and what's the difference between NFC and NonNFC with pit file?
Thank you for you all.
bluecard said:
hi, guys.
I'm having a mini2 with s5600 version. Am I ok to flash s5600D firmware to it?
Are the s5600 and S5600D the same?
and I managed to download the mini2 firmware from Samfirmware.
All I got it is one package S6500D firmware. 6500DLH1_S6500DCHNLH1_S6500DLH1_HOME.tar.md5
JENA_Secure_NonNFC_1109.pit and Odin3 v1.85
when I open Odin3, there is four files need to choose from. How am I supposed to use this one package?
and what's the difference between NFC and NonNFC with pit file?
Thank you for you all.
Click to expand...
Click to collapse
Please flash according to your model. If you have s6500 > flash s6500 firmware. same as s6500D
firmwares are flashed on the PDA tab.
the language I need is only with S5600D, that's why I decide to flash S5600D into my S5600 phone.
so as you said, one file package choose PDA tab, how about pit file？ doesn't need it?
The .pit file is only needed for re-partitioning , which you don't need when flashing a firmware .
You only need the .tar.md5 , which you load as PDA .
BUT
You can't flash S6500D firmware on an S6500 (or vice-versa) . It will fail at the flashing process (it won't brick it , but it won't work anymore either until you flash a proper firmware on it) .
First of all : samsung galaxy mini 2 aka jena is s6500 !
I have one question : On samfirmware there is firmware for my country (Romania) but only for Vodafone and Cosmote (carriers) and i have Romania(Orange). If i flash the one from another carrier will my sim card work ? and if i flash one from Hungary for example (couse its the last version of firmware) will my sim card work and be able to make calls in my country ?
I love threads like this. Where's my popcorn?
CoX26 said:
First of all : samsung galaxy mini 2 aka jena is s6500 !
I have one question : On samfirmware there is firmware for my country (Romania) but only for Vodafone and Cosmote (carriers) and i have Romania(Orange). If i flash the one from another carrier will my sim card work ? and if i flash one from Hungary for example (couse its the last version of firmware) will my sim card work and be able to make calls in my country ?
Click to expand...
Click to collapse
RO Orange SGM2 Firmware (note that this is S6500D but I'm pretty sure you have the D one because that's what Orange is selling) - I'm on the same carrier as you and I used this without a problem many times .
And no , nothing bad will happen as long as the firmware has the same baseband . The only differences are the bloatware apps that the carriers add to the firmware .
And "Samsung Galaxy Mini 2" can reffer to S6500 / D / T / L . Each version is for a different region , as Samsung usually does with its devices .
Yes, mine is s6500D. Thank you very much for the firmware and i didn't mention that it can reffer to s6500 D/T/L because it was obvious...
Uizz.UW said:
The .pit file is only needed for re-partitioning , which you don't need when flashing a firmware .
You only need the .tar.md5 , which you load as PDA .
BUT
You can't flash S6500D firmware on an S6500 (or vice-versa) . It will fail at the flashing process (it won't brick it , but it won't work anymore either until you flash a proper firmware on it) .
Click to expand...
Click to collapse
what do you mean "it won't work"?
it won't change anything, when power on, it still has the original version? it that what you mean?
bluecard said:
what do you mean "it won't work"?
it won't change anything, when power on, it still has the original version? it that what you mean?
Click to expand...
Click to collapse
Odin will fail flashing it when reaching the fat.bin .
Uizz.UW said:
Odin will fail flashing it when reaching the fat.bin .
Click to expand...
Click to collapse
I tried it. like you said, it fail. nothing changed.
My bad , flashing a S6500D firmware on a S6500 will result in a fail and the download will be discarted , and thus nothing will be actually flashed on the device . You're right .
The problem I was talking about appears when you repartition it . I switched them up xD
bluecard said:
hi, guys.
I'm having a mini2 with s5600 version. Am I ok to flash s5600D firmware to it?
Are the s5600 and S5600D the same?
and I managed to download the mini2 firmware from Samfirmware.
All I got it is one package S6500D firmware. 6500DLH1_S6500DCHNLH1_S6500DLH1_HOME.tar.md5
JENA_Secure_NonNFC_1109.pit and Odin3 v1.85
when I open Odin3, there is four files need to choose from. How am I supposed to use this one package?
and what's the difference between NFC and NonNFC with pit file?
Thank you for you all.
Click to expand...
Click to collapse
Put the pit file on the memorycard and insert in the phone ! Enter phone in to flash mode volume - home and power on , Charge flash file one PDA and run !
thanks
Uizz.UW said:
RO Orange SGM2 Firmware (note that this is S6500D but I'm pretty sure you have the D one because that's what Orange is selling) - I'm on the same carrier as you and I used this without a problem many times .
And no , nothing bad will happen as long as the firmware has the same baseband . The only differences are the bloatware apps that the carriers add to the firmware .
And "Samsung Galaxy Mini 2" can reffer to S6500 / D / T / L . Each version is for a different region , as Samsung usually does with its devices .
Click to expand...
Click to collapse
THANK YOU THANK YOU THANK YOU THANK YOU!
I registered here just to tell you that ) Thanks for the link for the firmware of gt-s6500d RO orange! You saved my phone