Database Develop

[Q] HELP HELP !!!! Looking Odin upgradable firmware

Hello all,
Bought a galaxy tab. And flashed it. With bad firmware.
I can set TAB in download mode.
So with ODIN I should be able to flash.
Can someone PLEASE!!!!?????? link me or tell me where to find A FULL EURO rom or P1000 compatible rom. That can be flashed with ODIN

Try latest Roto ROM here http://forum.xda-developers.com/showthread.php?t=939360, its okay for Euro Tab...

make a accout here, and you can choise the official firmware.

Samfirmware
Did that flashed and TAB boots and hangs at the SAMSUNG logo.
edit : DId a full whipe did not resolve hanging at the SAMSUNG logo
Used Jk5 with that. Downing Jk2 now.

ovigt71 said:
make a accout here, and you can choise the official firmware.
Click to expand...
Click to collapse
Why would u recommend this? Don't u know that they have locked bootloaders? People who don't understand stuff shouldn't be trying to help. Now he's gonna need to use the bootloader fix which has risks.
From the Tab.
www.twitter.com/ayman07

ayman07 said:
Why would u recommend this? Don't u know that they have locked bootloaders? People who don't understand stuff shouldn't be trying to help. Now he's gonna need to use the bootloader fix which has risks.
Click to expand...
Click to collapse
Only if he flashes one of the JMx series.
Flash the Rotohammer JMI firmware, it's a _complete_ firmware with the locked bootloader removed. If it doesn't work then you've either done something wrong (start again, read instructions carefully), or you've got a locked bootloader.
If you've already tried flashing a JMx firmware and are now having issues then you'll need to go back to whatever original firmware you had and then run the bootloader fix, which as long as you pay attention to the instructions is unlikely to be an issue, get it wrong however and you've got problems.
Also - this is not a development related question, should be in the general subforum.

TAB Dead
Tab is 3 days old and dead.
No recovery mode,
No Download mode,
only a blinking logo (screen of and on) that looks similar to the downloading logo when in flash mode when wall charger is attached.
No live indication or responsive s.
Indicates this a RMA to samsung service center.
Never had A flash or root problem of this kind before.
just the on of screen. If in wrong Category I hope some Admin might want to move it to the correct position.

ayman07 said:
Why would u recommend this? Don't u know that they have locked bootloaders? People who don't understand stuff shouldn't be trying to help. Now he's gonna need to use the bootloader fix which has risks.
From the Tab.
www.twitter.com/ayman07
Click to expand...
Click to collapse
Ok so you can give me a direct link to flashing boot of tab please ?

If it won't even get into download mode then there's nothing you can do to fix it, you'll have to take it back to the shop. Any fixes require being able to boot into download or recovery mode.

chetermaat said:
Tab is 3 days old and dead.
No recovery mode,
No Download mode,
only a blinking logo (screen of and on) that looks similar to the downloading logo when in flash mode when wall charger is attached.
No live indication or responsive s.
Indicates this a RMA to samsung service center.
Never had A flash or root problem of this kind before.
just the on of screen. If in wrong Category I hope some Admin might want to move it to the correct position.
Click to expand...
Click to collapse
Perhaps you mean the logo is phone at the left, middle is ! pc at the right, it's also a download mode, which you can flash thru odin, just flash with roto's rom, and do a repartition.

Basically if odin still able to detect your tab, it's not totally dead yet, if your tab's display is like what I mentioned above, just get roto's rom, AND MAKE SURE CHECKSUM IS CORRECT! Before flashing.

chetermaat said:
Ok so you can give me a direct link to flashing boot of tab please ?
Click to expand...
Click to collapse
Dutch!
http://gathering.tweakers.net/forum/list_message/35564050#35564050

[Q] Bricked NTT DoCoMo Japanese Tab

Ok here goes... This is my first thread post here but I am in serious need of help.
I have searched and searched the forums for a hopeful answer but I have found it difficult to find the answer I seek.
So here is the story:
Bought a GT second hand from Akihabara in Japan which was locked to NTT DoCoMo. I was using it as a WIFI only Tab and all was wonderful till my IT brain decided it could be better and I began to tinker.
I had been looking around for a way to make my Australian Virgin Mobile SIM to work on the tab and found a lot of good answers but nothing that would make it work.
I then had the brilliant idea to change the firmware with a European firmware so I could get all the features enabled from a fresh start. Which is where it all went wrong.
I first tried to flash the tab using Odin 1.7 with the P1000XXJK5 euro firmware from samfirmware.com
This failed and left my tab with the picture of a phone and a pc with a dotted line and in between them an exclamation point in a triangle.
After a lot of fiddling (I dont remember what I did but I managed to get rid of that screen had something to do with retrying the flash and it was very late last night at this point) I managed to try again but Odin just kept failing on running the updated firmware.
I then decided that it would be a good idea to run the Rotohammer firmware by following the instructions on this thread:
http://forum.xda-developers.com/showthread.php?t=895827&highlight=sc-01c
This is where I once again received errors from Odin and now my tab is somewhat bricked.
I tried reflashing but same errors every time. (I currently dont have the errors from Odin but I will update my post when I get home)
I can still get to the downloading screen (Yellow triangle with the Android digging) so I am hopeful all is not lost.
So now you have heard my sob story I will ask two questions....
1. Has anyone actually successfully flashed a Japanese model Tab?
2. My only thought/hope at the moment can anyone direct me to an original NTT DoCoMo firmware so I can at least go back to having WIFI only Tab?
Thanks in advance if you can help
Alex

Yes , i suggest you to wait until you get a right firmware for it !
That would probably work if the partitions are a match !
What is this model called btw ?
"NTT DoCoMo Japanese Tab" or there is any model ? such as M180 for korean , P1000 , P100 Sprint , I800 Verizon , etc..
Br
Oz

I am searching the an original NTT DoCoMo firmware.

Electroboy said:
Yes , i suggest you to wait until you get a right firmware for it !
That would probably work if the partitions are a match !
What is this model called btw ?
"NTT DoCoMo Japanese Tab" or there is any model ? such as M180 for korean , P1000 , P100 Sprint , I800 Verizon , etc..
Br
Oz
Click to expand...
Click to collapse
Oz the model is SC-01C it has a build date of 2010/12
I was thinking considering I can get into the build/download screen maybe trying an emergency firmware recovery using Kies.

Hi,
I'm a fellow SC01 owner. You can get a backup of the stock firmware here: http://www.megaupload.com/?d=OJAK2UZF
Firmware code is SC01COMJK2
I believe there are newer firmwares (which I haven't installed as some of them contain a new bootloader that only allows for signed firmwares, same as the international units) that I have seen mentioned on various Japanese blogs. Let me know if you want me to try to hunt any down for you.
As for my SC01, I installed the custom kernel by koxudaxi and it's working great. Mind you, I've only changed to this kernel and apart from that am running the stock OS. I got his kernel here which can overclock to 1.4GHz: http://koxudaxi.sakura.ne.jp/
The kernel I installed via Heindall is zImage_ntt_2. It looks like he's built a newer version though, I might check that out. I think what you might want to do, is in download mode try to restore the above backup to your unit. Look up the Roto Backup thread to see how to do this. Hopefully since you can get download mode, all is not lost. I personally think it's quite crummy that there are different hardware versions like this which aren't interchangeable though >_<

I'm going to give the original firmware a go today at lunch time and I will let you know how I go. Thanks anyways for the link if all goes well I'll look at possibly trying the the koxudaxi kernel.
UPDATE: Well I'm not having luck getting the firmware to flash to my tab I keep getting "Failed to retrieve config Descriptor" when trying to flash. I will keep plugging away.
UPDATE: Still getting the same problems using heimdall to flash the tab. Any suggestions as to what I could do next?

Recovering a Docomo Tab
I'm currently running Overcome v1.1.3 ROM and richardtrip's V15 kernel on my SC-01C.
acont said:
UPDATE: Well I'm not having luck getting the firmware to flash to my tab I keep getting "Failed to retrieve config Descriptor" when trying to flash. I will keep plugging away.
Click to expand...
Click to collapse
You're getting this error from Heimdall, right? Have you tried Odin 1.7?
Here's how I recovered my Tab using Odin:
1. Following the instructions in http://forum.xda-developers.com/showthread.php?t=895827, specify the P1_add_hidden.pit in the PIT button and select Re-Partition.
2. Specify the stock Docomo ROM when pressing the PDA button.
3. Ignore the Phone and CSC buttons, as the stock ROM already contain these items.
You should be able to restore your Tab to stock settings using this procedure.
If this doesn't work, you might want to check if the USB connection to your PC is ok, and if everything necessary to run Odin is installed on your PC.

Bugger!
Well thanks for your help all of you but I think I have just made matters worse.
Last night I had success in flashing the original docomo firmware provided to me by zetsurin but I think I shouldn't have included the boot images.
Unfortunately I think it is completely bricked now it now wont turn on and when plugged into power (thinking that the battery had died) it just comes up with a white screen.
I can't boot into download mode and I can hold down the power button till I turn blue in the face... So as Bones would say "It's dead Jim"
Unless any of you have anything else I could try as a last ditch shot I might just have to ship it back to Japan and get them to fix it or maybe try Samsung here in Oz.
Serves me right
Thanks again.

acont said:
Last night I had success in flashing the original docomo firmware provided to me by zetsurin but I think I shouldn't have included the boot images.
Click to expand...
Click to collapse
What exactly happened?
The SC01COMJK2 firmware does not contain protected bootloaders, by the way.
acont said:
Unfortunately I think it is completely bricked now it now wont turn on and when plugged into power (thinking that the battery had died) it just comes up with a white screen.
Click to expand...
Click to collapse
I've heard about this happening when the battery runs out. Try connecting the Tab to your PC (not your AC adapter) and let it trickle-charge for an hour or so. If successful, you should see the download screen.

fury1sog unfortunately that didnt work
spoke to the samsung repairers here in Aus and they said they can take a look at it for me hopefully bring life back into my unit and then I will never touch it again

Any thoughts?
Hopefully this post is still being looked at but has anyone got any ideas as to what I could do before I fork out $374 to my tab repaired by Samsung Australia?
According to the repair guys its a faulty board (not an idiot that tried to flash it) and needs to be replaced. Not sure if this is worth my trouble considering I could buy a brand new tab for $599.
There is a positive out of this, the MB will be an Australian MB and I will have a working "Australian" tab instead of the Japanese version.
Considering the unfortunate tragedy in Japan I am not sure I should try and get my friend in Japan to fix it for me.
Thoughts anyone?

I know someone who can unlock it, I have mine unlocked by them.
I was afraid of flashing it myself so I paid to have it unlocked, cost was $20.
I think you better go for the MB replacement, it's cheaper.

For what it's worth, I went to reset my tab to factory using a rotohammer backup I made when I first bought it, and got stuck in a boot loop. So I then used ODIN. Still got a boot loop. Then I tried ODIN repartition... it hung for hours. Knowing the thing was likely bricked I pulled the plug and now I am in the situation as you: I have a crappy icon of a phone + an exclamation + computer image. Dead.
I think the best thing I can do for this junk is to toss it unceremoniously in the bin. Fortunately I also have an iPad which has resumed full-time service.
EDIT: Some signs of hope in here: http://forum.xda-developers.com/showthread.php?t=903257
Try "heimdall close-pc-screen" to see if your tab can get kicked back into the boot loop at least. Mine has failed a repartition, but I can still get it into the boot loop, which is a start. Will experiment over the weekend.
EDIT 2: Well my tab is back up and runing. I reflashed my original roto backup using ODIN with repartition on, then I went into recovery and did a factory restore. Back up like stock now. I think I'm going to sell it though, since it's been badly dis-owned by Samsung.

zetsurin said:
Hi,
I'm a fellow SC01 owner. You can get a backup of the stock firmware here: http://www.megaupload.com/?d=OJAK2UZF
Firmware code is SC01COMJK2
I believe there are newer firmwares (which I haven't installed as some of them contain a new bootloader that only allows for signed firmwares, same as the international units) that I have seen mentioned on various Japanese blogs. Let me know if you want me to try to hunt any down for you.
As for my SC01, I installed the custom kernel by koxudaxi and it's working great. Mind you, I've only changed to this kernel and apart from that am running the stock OS. I got his kernel here which can overclock to 1.4GHz: http://koxudaxi.sakura.ne.jp/
The kernel I installed via Heindall is zImage_ntt_2. It looks like he's built a newer version though, I might check that out. I think what you might want to do, is in download mode try to restore the above backup to your unit. Look up the Roto Backup thread to see how to do this. Hopefully since you can get download mode, all is not lost. I personally think it's quite crummy that there are different hardware versions like this which aren't interchangeable though >_<
Click to expand...
Click to collapse
hi zetsurin!
thanks for teaching me how to unlock the tab.
problem now is, im not able to successfully flash any rom. keeps saying write fail, using odin.
stuck at docomo logo when rebooted.
need help.

also used heimdall. starts downloading. but stuck almost at the end of the tab's progress bar.
argh...

me too ! samsung galaxy tab m180 Korean .... huhu

What ROM is best for a SC-01C?
Hi Guys
I picked up a 2nd hand SC-01C from Yahoo Auction, and am wondering what the best ROM to use with it is...
Looks like this guy has got an Overcome ROM on it OK, (http://chaki-ramone.blogspot.com/2011/06/galaxytabsc-01cgingerbreadromovercome.html), so I wonder if the latest version (http://forum.xda-developers.com/showthread.php?t=1205990) will work OK - anyone tried? (is the SC-01C a GSM-based model??)
I'm not going to use a SIM with it, so I'm not bothered about unlocking - but just want it rooted & want a good balance between speed & battery life. If you were going from scratch with an SC-01C, what would you do? Any suggestions greatfully received!
Thanks in advance?
PS - I'm an iPhone / iPad / Ideos 8150 / Notion Ink Adam owner, all jailbroken / rooted. So I'm not scared about rooting per-se, just worried about trying something that will not work because of anything docomo has done to the Tab!

Acont you could be coma bricked try pluginging it into THE MAINS for at least 4 hours if nothing come up your hard bricked.
Sent from my GT-P1000 using XDA Premium App

zetsurin said:
For what it's worth, I went to reset my tab to factory using a rotohammer backup I made when I first bought it, and got stuck in a boot loop. So I then used ODIN. Still got a boot loop. Then I tried ODIN repartition... it hung for hours. Knowing the thing was likely bricked I pulled the plug and now I am in the situation as you: I have a crappy icon of a phone + an exclamation + computer image. Dead.
I think the best thing I can do for this junk is to toss it unceremoniously in the bin. Fortunately I also have an iPad which has resumed full-time service.
EDIT: Some signs of hope in here: http://forum.xda-developers.com/showthread.php?t=903257
Try "heimdall close-pc-screen" to see if your tab can get kicked back into the boot loop at least. Mine has failed a repartition, but I can still get it into the boot loop, which is a start. Will experiment over the weekend.
EDIT 2: Well my tab is back up and runing. I reflashed my original roto backup using ODIN with repartition on, then I went into recovery and did a factory restore. Back up like stock now. I think I'm going to sell it though, since it's been badly dis-owned by Samsung.
Click to expand...
Click to collapse
Can anyone pls help,, my galaxy tab 7inch gt-p1000r is stuck on phone+pc logo, can't go to download mode, can't go to recovery mode,, can't do anything,, pls someone help me,, I am desperate..

huylang280285 said:
me too ! samsung galaxy tab m180 Korean .... huhu
Click to expand...
Click to collapse
unbricking M180 is done long time ago
Here is a video for you
http://www.ort-jtag.com/blog/?e=15
udhtari said:
Can anyone pls help,, my galaxy tab 7inch gt-p1000r is stuck on phone+pc logo, can't go to download mode, can't go to recovery mode,, can't do anything,, pls someone help me,, I am desperate..
Click to expand...
Click to collapse
What about this P1000R , what is special or different ?
I know P1000L was for south american edition !
lemmy_0 said:
hi zetsurin!
thanks for teaching me how to unlock the tab.
problem now is, im not able to successfully flash any rom. keeps saying write fail, using odin.
stuck at docomo logo when rebooted.
need help.
Click to expand...
Click to collapse
Docomo solution is very soon !
That TAB need JTAGging thats the only way ..
I have the good and dead device in hand , we will release for ORT-JTAG probably this week ..
Best Regards
Oz.

[Q] I think its Bricked..and odin doesnt work

hey guys i have a captivate that i tried flashing and was successful then i tried again and the screen went black. im not sure if my battery died during the process or what but idk what to do. I cant get into recovery mode, i can only get into downloading mode but none of the odin's ive downloaded have recognized my device today. they worked fine yesterday. then i tried "hemidall one click" to try and get it back to stock but no luck. also when i try to power on I get the "Cornkernel" loading screen since that was the kernel i had loaded when it was working, but it fills the bar then shuts off. so it seems like im going to be at the mercy of a computer program since i am unable to access anything on the phone, right? I recently upgraded to gingerbread before all of the flashing of the new roms. all i want is to get back to either froyo or gingerbread, i dont really care, heck ill even take 2.1 at this point. if anyone knows whats going on and can help me thatd be great.
Thanks

Remember to use a rear usb hub for destop and run as admin. Heimdall will mess up your odin drivers.

You may also want to check out the captivate connection issues thread.
Also, to clarify further on prbassplayer's point about Heimdall, it will write its drivers over the drivers assigned to the USB port you are plugged into when it detects your phone. So if you have 4 USB ports and you use port 3 for Heimdall, it would look like this:
1 - Odin port
2 - Odin port
3 - Heimdall port
4 - Odin port
All this means is that you'll need to be aware of the port you used with Heimdall, or just reinstall the odin drivers (they'll overwrite the Heimdall setup).

OK so i tried what you mentioned in that thread on the connection issue and unfortunately it didn't work. is there a way i could start fresh? like delete all the drivers from my computer and then try it again, or do u not think that would work? im open to any ideas/suggestions right now because i hate having an extra paperweight and the thought of buying a new phone.

Don't know if this'll help or even why it worked for me but, when I had problems with odin recognizing my phone, I reinstalled/repaired samsung kies and odin would work for at least one flash.
Note: used full odin (not oneclick)
Good luck

hey guys thanks a bunch i finally got it to work. i had to use a different computer like you said. What a great feeling to have a functional phone again..
Thanks Again!!

So i got the phone back up and running android 2.1 and I would like to get it back to the stock 2.3 I had before the whole mess of rooting and stuff. but when i try to upgrade with kies or straight on the phone it ends up failing and telling me to try it again. any ideas why this is happening? or how to fix it.

blackjack54 said:
So i got the phone back up and running android 2.1 and I would like to get it back to the stock 2.3 I had before the whole mess of rooting and stuff. but when i try to upgrade with kies or straight on the phone it ends up failing and telling me to try it again. any ideas why this is happening? or how to fix it.
Click to expand...
Click to collapse
Kies sucks lol
look at my sig the first "go to" has the One Click Odin file to get you to stock and rooted 2.3 ...should take no more then 5 mins to do it

the link on that page for the 1 click odin doesnt work.

Try looking >>HERE<<. There are more one clicks there than you will ever need (hopefully)

Thanks I think I might try one of those. But considering what happened earlier in the week i want to clarify/ask a few ?s about that page. How do I know which Gingerbread to use of the 3 listed? How do I know whether or not to click the one with or without the bootloader? I'm new at this with android but I used to flash roms on my old windows mobile htc TILT.

blackjack54 said:
Thanks I think I might try one of those. But considering what happened earlier in the week i want to clarify/ask a few ?s about that page. How do I know which Gingerbread to use of the 3 listed? How do I know whether or not to click the one with or without the bootloader? I'm new at this with android but I used to flash roms on my old windows mobile htc TILT.
Click to expand...
Click to collapse
if you have never flashed GB bootloaders, you need to. Just oonce will work from that time forward. After you flash bootloaders, it's best to avoid them. A bad bootloader flash is one of the few things that will turn a Captivate into a paperwight. About which GB to use, I would say KK4. Its the same as the Official KK4 that was released. So to recap, flash bootloaders only once, then use no bootloader packages after that.

Im not sure if I unlocked them or not honestly. I know i had the phone rooted at one point and was running Cerberus rom. is there any way for me to check?

If you don't know, flash them.

ok i apologize in advance if this is a stupid obvious question..i got the odin one click and i was looking at the page u referred to me to and im wondering what the kernel is for? you cant place it in the odin one click obviously so is that just to keep things together or do i actually need it?

The kernel links are just to use if you want to root the stock rom. You have to use full Odin for those. Stick with the one click until you feel more comfortable in flashing AND do a lot research before your next flash.

so i got the KK1 gingerbread working and everything seems to work fine but now my data doesnt work. So I cant get ATT 3g or edge or anything the only internet i recieve is wifi. anyone know why this is? or how to fix it. ive tried a reboot and nothing ive tried changing the settings under network settings.

[Q] Samsung Galaxy s5300 - will rooting and flashing a ROM help?

I am a n00b, and I accept that.
I have a Samsung Galaxy Pocket (s5300). It looses network connection (while still showing that it has signal). I took it to a Samsung dealer and they reloaded the software, and a week later it does it again.
My question: Will rooting and installing a custom ROM fix this? (I don't want to root and custom ROM if I should rather take it in for repairs again and then do it when they have fixed it).
Your help is appreciated, by this n00b.

[email protected] said:
I am a n00b, and I accept that.
I have a Samsung Galaxy Pocket (s5300). It looses network connection (while still showing that it has signal). I took it to a Samsung dealer and they reloaded the software, and a week later it does it again.
My question: Will rooting and installing a custom ROM fix this? (I don't want to root and custom ROM if I should rather take it in for repairs again and then do it when they have fixed it).
Your help is appreciated, by this n00b.
Click to expand...
Click to collapse
Try a different modem.
"To err is human, to forgive is divine"
Sent from my SGS II

immortalneo said:
Try a different modem.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
It's an Android phone, not a modem. I really like this phone and would love it to work properly.

[email protected] said:
It's an Android phone, not a modem. I really like this phone and would love it to work properly.
Click to expand...
Click to collapse
Lol... You've got a lot of reading to do. Modem is part of your phone that deals with connectivity. Since you have not rooted and don't want to, send it in. But yes rooting it and flashing a different modem would help
Sent from my Note ll

Thanks

Well, I thought I might as well root and load a custom ROM onto my phone (seeing as the Vodacom software on it does not seem to work properly).
I managed to root the device easily (following a tutorial on the XDA forums). I then downloaded odin and a cusom ROM from the site, custom ROM needs the stock ROM installed, so I downloaded that as well. OK, phone shows green android logo in Odin Mode, now Windows fails to install the drivers for my device.
Let's try Linux (I am running Peppermint Three), I install Heimdall (works like Odin), the ROM I downloaded for Odin won't work here and there isn't a ROM available for Heimdall for the s5300.
So now I am stuck halfway through loading a different ROM onto my phone. Have heard I can try installing KIES for the Windows drivers. Will try that and report back.
*** Time for an update:
Downloaded and installed Kies. Windows now properly detects my phone, Odin showed the yellow block it was supposed to, and my phone is rooted and flashed to stock Android. Thanks to everyone at this forum for their great articles. Hopefully I will get better at this stuff some day.

Samsung note 5 stuck in a boot loop

Hello,
I am a noob... My note 5 went into boot loop several days after installing Avira (after the last update my phone said I had a virus... I should have known better)... I have spent many days researching and trying different things... most advice came from XDA so I joined. I have learned a lot but still have no success.
Samsung says I need a new phone... the local store took out the battery with no luck... They said its a gonner. Really??
I can get the phone into download and have it talk to my PC, but that is it... I cannot get into recovery or reset the phone
I was able to downgrade to OK3 using odin and passed, but still boot loop
I have purchased software to recover data, but FRP has blocked it
I have tried many different ways to remove FRP, but all have failed... I don't think I ever put this phone in debugging mode so I think that is why the other things have failed.
Is there anything I can do? Can you point me in the right direction (as long as it is not the trash can)
Please help.

Since you can get into download mode , have you tried to flash a full firmware package (make sure of model number first) via Odin ? sammobile has most firmwares. I would start with that. Good luck

Thank you so much for responding... I flashed ok3 from one of the links posted on this site using Odin and it passed successfully, but did not fix the problem. What would be the full firmware pack and were could I find so I know I have the right one

danarmor said:
Thank you so much for responding... I flashed ok3 from one of the links posted on this site using Odin and it passed successfully, but did not fix the problem. What would be the full firmware pack and were could I find so I know I have the right one
Click to expand...
Click to collapse
Just use smart switch. You don't have to worry about which firmware to be flashed. It will decide for you.
Sent from my SM-G925F

Rosli59564 said:
Just use smart switch. You don't have to worry about which firmware to be flashed. It will decide for you.
Sent from my SM-G925F
Click to expand...
Click to collapse
I tried that before with no success, but since Smart Switch had an update I tried it again... It says it does not support my SM-N920P.
I tried emergency rescue and it recognized my model number, but says I entered the wrong SN... I pretty sure I am entering the right SN