Database Develop

Viper4Android + Magisk on Nougat

Hi,
Have been using Viper4Android on MM a lot. Now that I have upgraded to Nougat (Open Beta 2), all I get is a valid installation but for some reason it does not process my audio. Please see screenshot.

dreinulldrei said:
Hi,
Have been using Viper4Android on MM a lot. Now that I have upgraded to Nougat (Open Beta 2), all I get is a valid installation but for some reason it does not process my audio. Please see screenshot.
Click to expand...
Click to collapse
Uninstall the viper apk..And flash viper4arise zip on twrp..

Thanks, but I am looking for a systemless install.
This has been working and others report it's working (on other devices though).
I wonder if anyone has tried it on a 3T with Nougat.

So is it possible to get it working systemless? Thanks!

You can use viper4rarise with magisk. Safetynet not triggered. But the problem is selinux status. Its always enforcing for some reason. But yi can change it from terminals using setenforce 0 command. Then it works. You need to do it every time after reboot. I tried to make selinux permissive. Bug it triggers safetynet. So im swt with running everytime post reboot

dreinulldrei said:
Hi,
Have been using Viper4Android on MM a lot. Now that I have upgraded to Nougat (Open Beta 2), all I get is a valid installation but for some reason it does not process my audio. Please see screenshot.
Click to expand...
Click to collapse
dreinulldrei said:
Thanks, but I am looking for a systemless install.
This has been working and others report it's working (on other devices though).
I wonder if anyone has tried it on a 3T with Nougat.
Click to expand...
Click to collapse
Systemless user here. If you're interested, I've created a Magisk module of ViPER4Android 2.3.4.0, which in my opinion is the best version as it had drivers of different quality you could choose. My Magisk module runs on Super High Quality.
And yes, I'm running it on Nougat/OOS 4.0.2. If you want it on Open Beta, send me the following files:
/system/etc/audio_effects.conf
/system/etc/audio_policy.conf
/system/vendor/etc/audio_effects.conf
Click to expand...
Click to collapse
And I'll make it for you.

Spasticdroid said:
Systemless user here. If you're interested, I've created a Magisk module of ViPER4Android 2.3.4.0, which in my opinion is the best version as it had drivers of different quality you could choose. My Magisk module runs on Super High Quality.
And yes, I'm running it on Nougat/OOS 4.0.2. If you want it on Open Beta, send me the following files:
And I'll make it for you.
Click to expand...
Click to collapse
Where can I download your module? Thanks!

Spasticdroid said:
Systemless user here. If you're interested, I've created a Magisk module of ViPER4Android 2.3.4.0, which in my opinion is the best version as it had drivers of different quality you could choose. My Magisk module runs on Super High Quality.
And yes, I'm running it on Nougat/OOS 4.0.2. If you want it on Open Beta, send me the following files:
And I'll make it for you.
Click to expand...
Click to collapse
Thanks! Much appreciated. Config attached.

cha0zine said:
Where can I download your module? Thanks!
Click to expand...
Click to collapse
Attached to this post.
dreinulldrei said:
Thanks! Much appreciated. Config attached.
Click to expand...
Click to collapse
Not a problem. Let me know how it goes.

I installed your module. How do I know if it's working properly? I tried changing settings while using google play music but didn't hear any changes. Driver status is enabled but processing shows "no".
Edit: tried listening a podcast and viperfx seems to be working. I can hear changes in sound. How can I get google play music also working?

cha0zine said:
I installed your module. How do I know if it's working properly? I tried changing settings while using google play music but didn't hear any changes. Driver status is enabled but processing shows "no".
Edit: tried listening a podcast and viperfx seems to be working. I can hear changes in sound. How can I get google play music also working?
Click to expand...
Click to collapse
I forgot about that. At the moment I cannot get streaming via Play Music working with ViPER's FX Compatible Mode set as normal. Only locally stored music played in Play Music will make ViPER work with it.
However, setting ViPER's FX Compatible Mode to Compatible will make it work with both local and streaming music in Google Play Music, along with other audio apps.
Hopefully that makes sense.

dreinulldrei said:
Hi,
Have been using Viper4Android on MM a lot. Now that I have upgraded to Nougat (Open Beta 2), all I get is a valid installation but for some reason it does not process my audio. Please see screenshot.
Click to expand...
Click to collapse
I had this issue too, I had to go into system/etc/audio_policy.conf and # out deep_buffer

Spasticdroid said:
Systemless user here. If you're interested, I've created a Magisk module of ViPER4Android 2.3.4.0, which in my opinion is the best version as it had drivers of different quality you could choose. My Magisk module runs on Super High Quality.
And yes, I'm running it on Nougat/OOS 4.0.2. If you want it on Open Beta, send me the following files:
And I'll make it for you.
Click to expand...
Click to collapse
Viper works here for everything but Google play music. The files you're modifying don't include the XML files, from experience in Nougat just modifying the conf files didn't make any difference, but I may be wrong (Certainly sounds so). What changes did you make may I ask? Removing deep buffer and raw only makes any difference for me if I modify the XML files in Nougat.

damiensturdy said:
Viper works here for everything but Google play music. The files you're modifying don't include the XML files, from experience in Nougat just modifying the conf files didn't make any difference, but I may be wrong (Certainly sounds so). What changes did you make may I ask? Removing deep buffer and raw only makes any difference for me if I modify the XML files in Nougat.
Click to expand...
Click to collapse
Check out my post here in the LG V20 thread for what I did. It's the exact same process, minus making backups and moving scripts to /su.d.
EDIT: I'm an idiot. I forgot the link. Time for bed. Here it is: https://forum.xda-developers.com/showpost.php?p=70797723&postcount=530

Spasticdroid said:
Systemless user here. If you're interested, I've created a Magisk module of ViPER4Android 2.3.4.0, which in my opinion is the best version as it had drivers of different quality you could choose. My Magisk module runs on Super High Quality.
And yes, I'm running it on Nougat/OOS 4.0.2. If you want it on Open Beta, send me the following files:
And I'll make it for you.
Click to expand...
Click to collapse
Spasticdroid said:
Check out my post here in the LG V20 thread for what I did. It's the exact same process, minus making backups and moving scripts to /su.d.
Click to expand...
Click to collapse
It appears we are on the same page. Just noticed your post above about Google play music. Gah. I'm going to keep fiddling

@Spasticdroid: Magisk 11.0 breaks this module...

dreinulldrei said:
@Spasticdroid: Magisk 11.0 breaks this module...
Click to expand...
Click to collapse
Fixed!
Attachments below are for Magisk v11.0+ only!

Spasticdroid said:
Fixed!
Attachments below are for Magisk v11.0+ only!
Click to expand...
Click to collapse
How could i install this? with magisk flash, or twrp flash?
And how can i uninstall it again?

Regionella said:
How could i install this? with magisk flash, or twrp flash?
And how can i uninstall it again?
Click to expand...
Click to collapse
install the magisk app in the play store and use it to install magisk. Install the above zip in magisk. Uninstall with magisk if needed.

[SOLVED]Modules not working 14.3/14.0

Modules work one time after reboot stop working
Rom RR 7.1.0
Nexus 6p

Everything looks fine in your log. Unless you really need it though, I'd recommend removing the Universal SafetyNet Fix module. It replaces Magisk internal busybox with one that might cause issues... Better to use the resetprop tool to change the device fingerprint to the stock 6P one of you can't pass SafetyNet on that ROM.
What is it that doesn't work? Details, please...

Didgeridoohan said:
Everything looks fine in your log. Unless you really need it though, I'd recommend removing the Universal SafetyNet Fix module. It replaces Magisk internal busybox with one that might cause issues... Better to use the resetprop tool to change the device fingerprint to the stock 6P one of you can't pass SafetyNet on that ROM.
What is it that doesn't work? Details, please...
Click to expand...
Click to collapse
injected youtube models
Fix mic

Didgeridoohan said:
Everything looks fine in your log. Unless you really need it though, I'd recommend removing the Universal SafetyNet Fix module. It replaces Magisk internal busybox with one that might cause issues... Better to use the resetprop tool to change the device fingerprint to the stock 6P one of you can't pass SafetyNet on that ROM.
What is it that doesn't work? Details, please...
Click to expand...
Click to collapse
Ans this msg show up after every reboot

hk48 said:
injected youtube models
Fix mic
Click to expand...
Click to collapse
That's not very detailed...
hk48 said:
Ans this msg show up after every reboot
Click to expand...
Click to collapse
That's not a Magisk issue. You have to match the vendor image with the system image. It even tells you what factory image to get the file from.

Modules not working 14.3/14.0
Modules work one time after reboot stop working
Rom RR 7.1.0
Nexus 6p
Click to expand...
Click to collapse
HI.. I have the same issues last days - then i tried to use an other Kernel that have Magisk integratet! Since that all fine (mostly) !!
Here the link to my thread about - in it you can found the link to the Kernel with Magisk...
https://forum.xda-developers.com/apps/magisk/problem-module-install-lost-root-galaxy-t3703398
I hope that fix your issues...
Greetz...

Didgeridoohan said:
That's not very detailed...
That's not a Magisk issue. You have to match the vendor image with the system image. It even tells you what factory image to get the file from.
Click to expand...
Click to collapse
That one I check it
Sent from my Nexus 6P using Tapatalk

n82freak said:
HI.. I have the same issues last days - then i tried to use an other Kernel that have Magisk integratet! Since that all fine (mostly) !!
Here the link to my thread about - in it you can found the link to the Kernel with Magisk...
https://forum.xda-developers.com/apps/magisk/problem-module-install-lost-root-galaxy-t3703398
I hope that fix your issues...
Greetz...
Click to expand...
Click to collapse
I will try it and hope work، thanks [emoji846]
Sent from my Nexus 6P using Tapatalk

hk48 said:
That one I check it
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
You made it sound like no modules work...
If it's only specific modules are troublesome, ask for help in the specific module threads. With lots of details about what doesn't work and don't forget to include logs.

Didgeridoohan said:
You made it sound like no modules work...
If it's only specific modules are troublesome, ask for help in the specific module threads. With lots of details about what doesn't work and don't forget to include logs.
Click to expand...
Click to collapse
Yes، all modules not working but in magisk shows modules work but when i use every module nothing work like im use the original app، hope i got that clear [emoji20]
Sent from my Nexus 6P using Tapatalk

hk48 said:
Yes، all modules not working but in magisk shows modules work but when i use every module nothing work like im use the original app، hope i got that clear [emoji20]
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Ok. We need to clear things up....
I see you have a whole bunch of modules installed and like I said, your log looks good. But when asked for details you only mentioned iYTBP and Android mic fix as not working. This is where I would like some details. How do you know that the modules don't work? What have you tested? What is the expected behaviour and what are you seeing?
Let's start with something that's easy to test: busybox. Open a terminal emulator and type busybox. If nothing happens, run the command as su. Does it show a list of all the applets available?

Didgeridoohan said:
Everything looks fine in your log. Unless you really need it though, I'd recommend removing the Universal SafetyNet Fix module. It replaces Magisk internal busybox with one that might cause issues... Better to use the resetprop tool to change the device fingerprint to the stock 6P one of you can't pass SafetyNet on that ROM.
What is it that doesn't work? Details, please...
Click to expand...
Click to collapse
If i remove universal safetynet fix module i got fules pass[emoji34] so resetprop tool fix that ??
I search for resetprop tool and got nothing can u pls give a like for that، i know im ask to much [emoji28]
Sent from my Nexus 6P using Tapatalk

Didgeridoohan said:
Ok. We need to clear things up....
I see you have a whole bunch of modules installed and like I said, your log looks good. But when asked for details you only mentioned iYTBP and Android mic fix as not working. This is where I would like some details. How do you know that the modules don't work? What have you tested? What is the expected behaviour and what are you seeing?
Let's start with something that's easy to test: busybox. Open a terminal emulator and type busybox. If nothing happens, run the command as su. Does it show a list of all the applets available?
Click to expand...
Click to collapse
Use all modules not work،
I install the module ok then i go test it nothing happen..
Like utube first i download the the module iytbp and first time work perfect also fix mic and jamesDSP module for better sound work all perfect but after second time reboot all modules show in magisk but when i test every modules not working like i dont have any modules there [emoji36]
Sent from my Nexus 6P using Tapatalk

hk48 said:
If i remove universal safetynet fix module i got fules pass[emoji34] so resetprop tool fix that ??
I search for resetprop tool and got nothing can u pls give a like for that، i know im ask to much [emoji28]
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
The resetprop tool is a part of Magisk. I've written a bit about in the troubleshooting guide (start under "Matching official prop values to pass SafetyNet").
hk48 said:
Use all modules not work،
I install the module ok then i go test it nothing happen..
Like utube first i download the the module iytbp and first time work perfect also fix mic and jamesDSP module for better sound work all perfect but after second time reboot all modules show in magisk but when i test every modules not working like i dont have any modules there [emoji36]
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Those screenshots clearly show that the busybox module is working so things are Magic Mounting as they should. How do you test the modules?

Didgeridoohan said:
The resetprop tool is a part of Magisk. I've written a bit about in the troubleshooting guide (start under "Matching official prop values to pass SafetyNet").
Those screenshots clearly show that the busybox module is working so things are Magic Mounting as they should. How do you test the modules?
Click to expand...
Click to collapse
By use there effect app like module iytbp i check the utube work like normal utube، and jumesDSP module i use there app and not see any change when i switch things..
… ..
After besybox imgs i send is that should told u everything is running??? U dont see anything wrong [emoji47][emoji47][emoji47]
Sent from my Nexus 6P using Tapatalk

hk48 said:
By use there effect app like module iytbp i check the utube work like normal utube، and jumesDSP module i use there app and not see any change when i switch things..
… ..
After besybox imgs i send is that should told u everything is running??? U dont see anything wrong [emoji47][emoji47][emoji47]
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
The busybox screenshots do tell me that everything is working as it should.
The iYTBP Youtube app looks just like the normal Youtube (unless you use the black themed version). It removes ads and brings background playback to the app. If you're seeing ads it might be because you didn't uninstall updates for the stock Youtube app or you let it update through the Play store (you should disable updates for Youtube when using this module).
The audio module might simply be incompatible with your device or you may have another audio mod that is conflicting. Ask for advice in the module support thread.

Didgeridoohan said:
Everything looks fine in your log. Unless you really need it though, I'd recommend removing the Universal SafetyNet Fix module. It replaces Magisk internal busybox with one that might cause issues... Better to use the resetprop tool to change the device fingerprint to the stock 6P one of you can't pass SafetyNet on that ROM.
What is it that doesn't work? Details, please...
Click to expand...
Click to collapse
Didgeridoohan said:
The busybox screenshots do tell me that everything is working as it should.
The iYTBP Youtube app looks just like the normal Youtube (unless you use the black themed version). It removes ads and brings background playback to the app. If you're seeing ads it might be because you didn't uninstall updates for the stock Youtube app or you let it update through the Play store (you should disable updates for Youtube when using this module).
The audio module might simply be incompatible with your device or you may have another audio mod that is conflicting. Ask for advice in the module support thread.
Click to expand...
Click to collapse
What can i say، when u say disable update ? the only thing i dont check it is update im really sorry for wist ur time oh god i feel so ?? for not check that before post ???
For iytbp module now work fine
And another modules i will check one by one، dont worry i will not wist ur time like that ،،
Im really sorry.
Have a good day sir

[Module][UPDATED] AirAudio System-Audio Mode

What's good everyone!
I use the AirAudio app and pretty much enjoy streaming my music from services (such as Spotify) to any capable device at home, work or at my friend's house.
Now the module itself hasn't been updated and isn't compatible with the latest version of Magisk (v16), so I went ahead and made it compatible with it.
It'll be attached to this thread, simply download and install it manually.
I'll also try and upload it to the repository.
Note:
I am NOT affiliated with AirAudio.
I'm simply a user like you. I just noticed it's outdated and updated it.
Note for Moderators:
In case the actual AirAudio dev reaches out to you, let me know and feel free to close this thread.
In the meantime, I'd like users to use my updated module to use their app to the full extent.
--
Credits:
AirAudio Devs - AirAudio ; Original Magisk Module
topjohnwu - Magisk, Magisk template
Me? - Update

I have installed it in LOS 15.1. How to use it? Can't see an UI?

I loved!

How do this compare to the air audio app on play store? I cannot find any app or setting to use this module after installing with magisk

karstensson said:
How do this compare to the air audio app on play store? I cannot find any app or setting to use this module after installing with magisk
Click to expand...
Click to collapse
you have to use both together. This module allows the app to use the "system mode" from the app and get the sound directly internally to send it over the wlan. The other mode from air audio is much worse as it is has to play the sound over the speaker and record it over the microphone.
For me this Magisk package is working wonderful: just installing this module. Afterwards the app from the Playstore and voila: I am able to play music from my phone to most every wifi-based receivers. The app is worth every cent!

works on s9/s9+?

speckdeckel said:
works on s9/s9+?
Click to expand...
Click to collapse
It should work with any phone regardless because it depends onAirAudio itself.

knojap said:
I have installed it in LOS 15.1. How to use it? Can't see an UI?
Click to expand...
Click to collapse
There's no UI to it, it just enables the system-mode in AirAudio, yoiu'll have to check the app to see the option.
This module basically re-enables it.

Not working for me
Hello
I have a oneplus 6 running magisk 17.1
The module does not work for me. Airaudio never requests root privileges, is that the problem

Nope, that's why you use this module!
In the AirAudio app > Settings > System Audio button must be green.
Sent with much love & Android. OnePlus 5T

v3 breaks the app. Only microphone mode available. Had to revert v2 to get back system mode. Running Magisk v16 and MM 5.8.3.

How do you downgrade I can't seem to find V2? Thanks

megatron_lives said:
How do you downgrade I can't seem to find V2? Thanks
Click to expand...
Click to collapse
Here we are:
https://drive.google.com/file/d/1bHZ9SnpwGXvUJBUpt73aD5Ps8AthErrI/view?usp=sharing

gkornaks said:
Here we are:
https://drive.google.com/file/d/1bHZ9SnpwGXvUJBUpt73aD5Ps8AthErrI/view?usp=sharing
Click to expand...
Click to collapse
Thank you very much. Where did you get this or do you have a backup?

megatron_lives said:
Thank you very much. Where did you get this or do you have a backup?
Click to expand...
Click to collapse
Got a backup.

gkornaks said:
v3 breaks the app. Only microphone mode available. Had to revert v2 to get back system mode. Running Magisk v16 and MM 5.8.3.
Click to expand...
Click to collapse
I have today the same experience with my oneplus 6 under Oreo. Uninstall v3 and install v2: everything works as expected again in system mode.

Hi everyone,
I am the developer of AirAudio & its Magisk-module.
I will update AirAudio's Magisk-module in the next hours.
Please, simply contact me (the devs in general) about such issues.. just writing here doesn't help the mass

funtax said:
Hi everyone,
I am the developer of AirAudio & its Magisk-module.
I will update AirAudio's Magisk-module in the next hours.
Please, simply contact me (the devs in general) about such issues.. just writing here doesn't help the mass
Click to expand...
Click to collapse
Thanks! Next time will do.
Can you let us know when it's updated and in the repo?

gkornaks said:
Thanks! Next time will do.
Can you let us know when it's updated and in the repo?
Click to expand...
Click to collapse
The module should already be up to date now but I can't check it right now because my current device isn't rooted.
One user is reporting it's still not working but this might be related to another issue with Magisk.
Please check if v4+ is available inside Magisk Manager and contact me at [email protected] if you face any issues

I have same issuewith v4: reverting to v2 works.

Viper4Android FX v2.7.1.0: Google Camera crash.

Anyone is using Viper4Android FX v2.7.1.0 (Magisk Module)? Once installed, Google Camera doesn't work anymore. Tried to ask on the official thread
https://forum.xda-developers.com/android/apps-games/app-viper4android-fx-2-6-0-0-t3774651
but no answer....
Which version of Viper4Android are you using on a rooted Pixel 3a?

Fentadroid said:
Anyone is using Viper4Android FX v2.7.1.0 (Magisk Module)? Once installed, Google Camera doesn't work anymore. Tried to ask on the official thread
https://forum.xda-developers.com/android/apps-games/app-viper4android-fx-2-6-0-0-t3774651
but no answer....
Which version of Viper4Android are you using on a rooted Pixel 3a?
Click to expand...
Click to collapse
I've been using that version of viper since I got the phone and haven't run into any issues. I do however also have the audio modification library and audio compatibility patch modules installed as well. If those don't help, then I think there is a larger issue.
PS - I've used both the latest stable and the canary Magisk builds without issues.

sic0048 said:
I've been using that version of viper since I got the phone and haven't run into any issues. I do however also have the audio modification library and audio compatibility patch modules installed as well. If those don't help, then I think there is a larger issue.
PS - I've used both the latest stable and the canary Magisk builds without issues.
Click to expand...
Click to collapse
Which kernel are you using? I'm using ElementalX 1.05.
Tried with audio modification library and compatibily patch modules but didn't work. Everytime i start the google camera, it crashes.

Fentadroid said:
Which kernel are you using? I'm using ElementalX 1.05.
Tried with audio modification library and compatibily patch modules but didn't work. Everytime i start the google camera, it crashes.
Click to expand...
Click to collapse
I've used both stock and elemental kernels. I'm currently on elemental 1.05 with TWRP installed.

sic0048 said:
I've used both stock and elemental kernels. I'm currently on elemental 1.05 work TWRP installed.
Click to expand...
Click to collapse
Ok, so... same as me.
Really, i don't know where to start. I've flashed stock rom wiping everything some days ago. So, my phone is clean. I've the latest Magisk stable and elementalx 1.05.
All i can do is try to dirty flash stock rom again and install twrp, magisk and elementalx and try another time.
About audio compatibily patch, there are really too many options and i don't know where to start to install it correctly..... but i don't think google camera crashes because of that......
Same problem if i install Viper4Android FX Legacy module.

Fentadroid said:
Ok, so... same as me.
Really, i don't know where to start. I've flashed stock rom wiping everything some days ago. So, my phone is clean. I've the latest Magisk stable and elementalx 1.05.
All i can do is try to dirty flash stock rom again and install twrp, magisk and elementalx and try another time.
About audio compatibility patch, there are really too many options and i don't know where to start to install it correctly..... but i don't think google camera crashes because of that......
Same problem if i install Viper4Android FX Legacy module.
Click to expand...
Click to collapse
I would be surprised if the audio compatibility patch caused an issue too. Honestly I had forgotten about the initial options that I had to choose when I installed it. I just uninstalled it and reinstalled it and only chose the "notification remover" option and then opted out of the lib use (last option). I use the headphone jack, so I don't need a USB DAC (does this phone even have one?), nor do I use Spotify, etc.
However, it is important to install the audio modification library last. It should find both the Audio Compatibility Patch as well as Viper4Android and patch both to work together. I might suggest that you uninstall it, reboot, and reinstall it to ensure it is actually patching both audio modification. Also, make sure the driver is actually installed in Viper if you end up reinstalling any of these mods as you might find that the driver isn't actually installed. It's a long shot, but perhaps that would fix your issue.
I'm also using the leaked camera version 6.3.017.253834016 currently (because it has the night sight setting as a main option instead of buried in the "more" settings). But this really shouldn't matter and the stock camera app worked just fine too. Viper4Android is always one of the first mods I install on a phone and it has never given me a problem on my 3a XL or caused the camera to stop working.

sic0048 said:
I would be surprised if the audio compatibility patch caused an issue too. Honestly I had forgotten about the initial options that I had to choose when I installed it. I just uninstalled it and reinstalled it and only chose the "notification remover" option and then opted out of the lib use (last option). I use the headphone jack, so I don't need a USB DAC (does this phone even have one?), nor do I use Spotify, etc.
However, it is important to install the audio modification library last. It should find both the Audio Compatibility Patch as well as Viper4Android and patch both to work together. I might suggest that you uninstall it, reboot, and reinstall it to ensure it is actually patching both audio modification. Also, make sure the driver is actually installed in Viper if you end up reinstalling any of these mods as you might find that the driver isn't actually installed. It's a long shot, but perhaps that would fix your issue.
I'm also using the leaked camera version 6.3.017.253834016 currently (because it has the night sight setting as a main option instead of buried in the "more" settings). But this really shouldn't matter and the stock camera app worked just fine too. Viper4Android is always one of the first mods I install on a phone and it has never given me a problem on my 3a XL or caused the camera to stop working.
Click to expand...
Click to collapse
Tried exactly what you said. Same issue, Google Camera crashes on start. Every V4A version i tried, same thing.... Well, i don't know what to try more..... Asked on official V4A thread but no answer. Is there any way to provide logs to discover what happen?
EDIT: I've attached a logcat, if you know what could be the problem i will be happy

Dirty flashed August factory image, Elementalx, TWRP and Magisk. Same issue. Anyone who can help me taking a look at the logs?

Im on 2.5.0.5 and i have no issues so far with the camera app.
The only issue that i have is that v4a is marked as harmful by Google protect. Anyone else?

Pixel 2 xl user here with the latest viper4android on android 10, same camera app is crashing on me
stock 10 with sultan kernel installed and magisk 20.1

yabadabadooo said:
Im on 2.5.0.5 and i have no issues so far with the camera app.
The only issue that i have is that v4a is marked as harmful by Google protect. Anyone else?
Click to expand...
Click to collapse
Are you using Boldbeast recorder magisk module?

Mi drivers won't install any help appreciated

caballon said:
Mi drivers won't install any help appreciated
Click to expand...
Click to collapse
I've never had any real issues getting Viper4Android to work on Android 10, but I understand it is a common issue. Here is a Pixel 4 thread on installing Viper4Android on Android 10 and how they got it to work. The fact that it is on a Pixel 4 device is irrelevant. Perhaps this can help you get the driver installed.
PS - I should mention that I already was using the audio compatibility module and the audio modification module prior to moving to Android 10, so it is quite possible that is why I never experienced any issues.

sic0048 said:
I've never had any real issues getting Viper4Android to work on Android 10, but I understand it is a common issue. Here is a Pixel 4 thread on installing Viper4Android on Android 10 and how they got it to work. The fact that it is on a Pixel 4 device is irrelevant. Perhaps this can help you get the driver installed.
PS - I should mention that I already was using the audio compatibility module and the audio modification module prior to moving to Android 10, so it is quite possible that is why I never experienced any issues.
Click to expand...
Click to collapse
Thanks for the tip

Fentadroid said:
Are you using Boldbeast recorder magisk module?
Click to expand...
Click to collapse
I am. And the camera started working after disabling the boldbeast module.

[Module] Magisk DRM Disabler

https://gitlab.com/Atrate/magisk-drm-disabler
READ THIS FIRST
Some (quite a few) users have reported various breakages due to this module. It is not really possible to fix them, since it seems that DRM might be integrated to tightly into some ROMs. You have been warned.
Description
A Magisk module designed to disable DRM (Digital Restrictions Management) completely on Android devices using Magisk, for reasons of security or ethics (see: Opposing Digital Rights Mismanagement and Examples of proprietary DRM).
Installation
Install through Magisk Manager
OR
Download the module from the releases
Flash the module through Magisk Manager or TWRP/OrangeFox
Grab the newest release on GitLab or GitHub
THIS IS NOT A MODULE THAT WILL HELP YOU BYPASS DRM PROTECTION
Quite the contrary, it will make you unable to watch any DRM-restricted content.
This is an alpha release
I am not responsible for any damage done to your device by this module, so flash at your of discretion
LOOKING FOR TESTERS!
If you're interested in helping the project by being a tester, please refer to CONTRIBUTING.md
Credits
topjohnwu for magisk
Changelog
License
This project is licensed under the GPL-3.0-or-later.

sad to say but after flashing your module on my device my volumes are not working. even set low its still got sounds or music! Removed module on magisk manager then issue is gone! ?

problemathic said:
sad to say but after flashing your module on my device my volumes are not working. even set low its still got sounds or music! Removed module on magisk manager then issue is gone! ?
Click to expand...
Click to collapse
All device sounds or just music in some apps?

Atrate said:
All device sounds or just music in some apps?
Click to expand...
Click to collapse
all devices sounds! i set it to mute but still got a sounds! removing the modules fixed it. hopes you get a fix

problemathic said:
all devices sounds! i set it to mute but still got a sounds! removing the modules fixed it. hopes you get a fix
Click to expand...
Click to collapse
Wonder what this could be caused by. Let's see if anyone else has a similar issue. What device and ROM do you use?

Atrate said:
Wonder what this could be caused by. Let's see if anyone else has a similar issue. What device and ROM do you use?
Click to expand...
Click to collapse
i have redmi note 5 pro (whyred) china variant. any rom i used same issue.

Atrate said:
Wonder what this could be caused by. Let's see if anyone else has a similar issue. What device and ROM do you use?
Click to expand...
Click to collapse
Odd request. Anyway you can make a module that actually adds all this stuff to a device that doesn't currently have it?

RLKirk said:
Odd request. Anyway you can make a module that actually adds all this stuff to a device that doesn't currently have it?
Click to expand...
Click to collapse
Unfortunately no, it would have to be device-specific, better to ask a custom ROM maintainer for that device

Atrate said:
Unfortunately no, it would have to be device-specific, better to ask a custom ROM maintainer for that device
Click to expand...
Click to collapse
It's a joying headunit for a car and sadly has no custom ROMs. I would attempt it myself but have no clue where to start on making a ROM for a device with no source code lol. But thanks for the reply.

Two things, what the scope of this module what is it supposed to allow you to do?
Also why not a backup or the original files of one have to go back to the original files

Darkcast said:
Two things, what the scope of this module what is it supposed to allow you to do?
Also why not a backup or the original files of one have to go back to the original files
Click to expand...
Click to collapse
It's a simple module that removes DRM components (services and libraries) from your device for reasons of ethics or security. See the OP for links about that.

Works great!

and now on latest update im having no sounds at all! im on redmi note 5 pro codename: whyred

problemathic said:
and now on latest update im having no sounds at all! im on redmi note 5 pro codename: whyred
Click to expand...
Click to collapse
Seems to be a device-specific issue, got a logcat woth any errors?

Atrate said:
Seems to be a device-specific issue, got a logcat woth any errors?
Click to expand...
Click to collapse
let me try matlog. ill post it here as soon as i get the logs
edit: latest release fixed the issue. what did you do? got the volume properly working now. high, low and mute! thank you

Great to know it's working for you!
I have released v0.2.0 today, let's hope it didn't break it again.

Alarms without sound, aslo no IU sounds - no that I miss them, but alarms would be nice to have. Since first release to the latest version v0.2.0.
Xiaomi mi 9t, xiaomi eu 11.0.4.
View attachment logcat_04-29-2020_11-24-56.txt

hovnonium said:
Alarms without sound, aslo no IU sounds - no that I miss them, but alarms would be nice to have. Since first release to the latest version v0.2.0.
Xiaomi mi 9t, xiaomi eu 11.0.4.
View attachment 5007359
Click to expand...
Click to collapse
Can't reproduce and the logcat doesn't seem to show anything useful. Try rebooting, I've heard from someone that their sound was broken on first reboot but fixed itself on second. (Don't ask me why it works ¯\_(ツ)_/¯ )

Oneplus 6t havoc 3.4 here without gapps.
This module detached all controls over screen brightness so I dumped ot for now.
The idea ia nice though

darfri said:
Oneplus 6t havoc 3.4 here without gapps.
This module detached all controls over screen brightness so I dumped ot for now.
The idea ia nice though
Click to expand...
Click to collapse
Hmm, wonder what causes it. Must be an OP-specific issue, since I have tested the module on a gappless G6 with Havoc 3.4 and didn't experience that issue. Also, have you tried rebooting twice?