Database Develop

Error mode, really hard bricked

I tried to force update to b170, resored the backup from howtoroot thread and flashed stock recovery from within twrp, rebooted and my devicve is stuck on
ERROR MODE
err no11 recovery image
errror no 2 load failed
doesnt boot to fastboot, cant be seen by pc
cant even turn it off... it is infinite loop if i hold power button it boots "huawei logo for 1 second and again error mode"
Please help me to recover my device :/

Oh damn.. i recovered it basially i waited until batery died and then it got into fastboot mode, i unlocked bootloader, flashed twrp, restored b164 to b170 backup, and now im waiting until i download full update to b170 to finish the process, after that device will be 100% perfect

aciupapa said:
Oh damn.. i recovered it basially i waited until batery died and then it got into fastboot mode, i unlocked bootloader, flashed twrp, restored b164 to b170 backup, and now im waiting until i download full update to b170 to finish the process, after that device will be 100% perfect
Click to expand...
Click to collapse
How to boot into TWRP when after flashing it reboot infinitely on error mode and can't shutdown it.
Pressing VolumeUp for eRecovery go to error mode

aciupapa said:
Oh damn.. i recovered it basially i waited until batery died and then it got into fastboot mode, i unlocked bootloader, flashed twrp, restored b164 to b170 backup, and now im waiting until i download full update to b170 to finish the process, after that device will be 100% perfect
Click to expand...
Click to collapse
HI man I have the some problem error mode screen but in oreo update p8 lite 2017 any solution plz

p181153 said:
How to boot into TWRP when after flashing it reboot infinitely on error mode and can't shutdown it.
Pressing VolumeUp for eRecovery go to error mode
Click to expand...
Click to collapse
If you solved your problem tell me plz plz plz

jalel25 said:
If you solved your problem tell me plz plz plz
Click to expand...
Click to collapse
nope, this community do not help at all, my phone is dead even if a solution exist but nobody will tell me. I made 2 threads about it and they all go off topic and don't respond when I tell them. It's a very bad community

p181153 said:
nope, this community do not help at all, my phone is dead even if a solution exist but nobody will tell me. I made 2 threads about it and they all go off topic and don't respond when I tell them. It's a very bad community
Click to expand...
Click to collapse
I hope one of them help me ?

jalel25 said:
I hope one of them help me
Click to expand...
Click to collapse
Wait for moment when battery is at 0% and phone will shut down. Boot into fastboot and flash TWRP recovery, create backup, wipe all on device and reboot it.

mijanto313 said:
Wait for moment when battery is at 0% and phone will shut down. Boot into fastboot and flash TWRP recovery, create backup, wipe all on device and reboot it.
Click to expand...
Click to collapse
I tried that. My phone has been in this state for probably a month already. I heard the only solution is DC Phoenix via testpoint method.

Try Firmware finder for huawei + erecovery method , which is :
- download firmware finder on *another android phone* and search for exact phone model (ex : PRA-LA1C185)
- choose the very first firmware down the list
- Get an update thorugh dns >> Manually >> Register update
- After that , reboot your bricked phone into erecovery by ( power + volume*+*)
- press download recovery and last firmware
- wait till getting package
- by now should firmware start downloading
- let phone complete it's work and reboot
Hope that's work for you ?

p181153 said:
nope, this community do not help at all, my phone is dead even if a solution exist but nobody will tell me. I made 2 threads about it and they all go off topic and don't respond when I tell them. It's a very bad community
Click to expand...
Click to collapse
About your problem - If your phone throws errors when you try to boot into TWRP, then something is wrong with TWRP (for example you flashed incompatibile version). Boot into bootloader aka fastboot mode and try to flash TWRP again from there.
Off-topic part: In my opinion, this is the most helpful & best community about Android phones. Noone is going to help you if you keep spamming. Just be patient, we are humans, not robots

Botar230 said:
About your problem - If your phone throws errors when you try to boot into TWRP, then something is wrong with TWRP (for example you flashed incompatibile version). Boot into bootloader aka fastboot mode and try to flash TWRP again from there.
Off-topic part: In my opinion, this is the most helpful & best community about Android phones. Noone is going to help you if you keep spamming. Just be patient, we are humans, not robots
Click to expand...
Click to collapse
Hi,i bricked yesterday but today I installed the wrong TWRP as you said and I do not have access to anything .. Do you have a solution? Some say the bootloader is locked..
thank's !

Freysheur said:
Hi,i bricked yesterday but today I installed the wrong TWRP as you said and I do not have access to anything .. Do you have a solution? Some say the bootloader is locked..
thank's !
Click to expand...
Click to collapse
Bootloader can't be locked if you managed to flash TWRP. Do the following:
1. Make sure the phone is turned off
2. Hold Vol- and plug the usb cable in
3. You should be in bootloader aka fastboot mode
4. Flash TWRP using (p8 lite 2015) fastboot flash recovery <path>.img
5. fastboot reboot

Botar230 said:
Bootloader can't be locked if you managed to flash TWRP. Do the following:
1. Make sure the phone is turned off
2. Hold Vol- and plug the usb cable in
3. You should be in bootloader aka fastboot mode
4. Flash TWRP using (p8 lite 2015) fastboot flash recovery <path>.img
5. fastboot reboot
Click to expand...
Click to collapse
Hi bro', i love you :silly: I did not know the technic for enter in fastboot without volume "-" .
Okay, the bootloader and FRP is unlocked but before i'am on Nougat and i have passed on Oreo. For flashed the TWRP my commands are " fastboot flash recovery_ramdisk recovery.img ".
And i have a error message when i flash the ROM Stock or TWRP with the normal commands as " fastboot flash recovery recovery.img ".
My error message it's :
fastboot flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (11204 KB)...
OKAY [ 0.290s]
writing 'recovery'...
FAILED (remote: partition length get error)
finished. total time: 0.305s
Thank's for your reponse, sorry for my english, i'm french !

Freysheur said:
Hi bro', i love you :silly: I did not know the technic for enter in fastboot without volume "-" .
Okay, the bootloader and FRP is unlocked but before i'am on Nougat and i have passed on Oreo. For flashed the TWRP my commands are " fastboot flash recovery_ramdisk recovery.img ".
And i have a error message when i flash the ROM Stock or TWRP with the normal commands as " fastboot flash recovery recovery.img ".
My error message it's :
fastboot flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (11204 KB)...
OKAY [ 0.290s]
writing 'recovery'...
FAILED (remote: partition length get error)
finished. total time: 0.305s
Thank's for your reponse, sorry for my english, i'm french !
Click to expand...
Click to collapse
Use fastboot flash recovery only on 2015 variant. You need to use recovery ramdisk on 2017 variant
Sent from my LG-K220 using XDA Labs

Botar230 said:
Use fastboot flash recovery only on 2015 variant. You need to use recovery ramdisk on 2017 variant
Sent from my LG-K220 using XDA Labs
Click to expand...
Click to collapse
Why before i used the flash recovery and it worked ?
Do you have an answer to the error " FAILED (remote: partition length get error) " ?
---------- Post added at 11:25 AM ---------- Previous post was at 10:40 AM ----------
Ok, i try install ROM via TWRP..
I have no errors but i bootloop again.. and he puts me in the menu Huawei eRecovery..
---------- Post added at 11:39 AM ---------- Previous post was at 11:25 AM ----------
I try install ROM via Fastboot CMD.
C:\Users\Alban\Desktop\fastboots>fastboot erase cache
erasing 'cache'...
FAILED (remote: Command not allowed)
finished. total time: 0.011s
C:\Users\Alban\Desktop\fastboots>fastboot flash boot BOOT.img
target reported max download size of 471859200 bytes
sending 'boot' (15524 KB)...
OKAY [ 0.389s]
writing 'boot'...
FAILED (remote: partition length get error)
finished. total time: 0.413s

Hmmmm, i installed MorfuZ rom, he boot but he restart alone..
So I do not have a rom ...

jalel25 said:
I hope one of them help me
Click to expand...
Click to collapse
Everyone, I made a guide on my website to unbrick the device.
Here is the link:
http://mrviking.simplesite.com/440246066

Hard bricked P10 need help (SOLVED)

So I was trying to restore my rooted p10, I first tried using a twrp restore which didn't work then nothing would boot, so then I decided to reflash the ROM but the software I tried using relocks the bootloader then unlocks it again. So now what I have is my p10 with no custom recovery, a locked booloader and no working os installed. And as I cant boot the phone I cant get the information to get the code to unlock the bootloader. Any one have any ideas that doesn't involve paying for DC unlocker.
thanks
SOLVED: I found the imei on the box and unlocked the bootloader with that info.

Do you still have access to ADB/Fastboot ?
if yes then maybe try flashing main img files like kernel ect.
if no fastboot,i really dunno mate

virusdunil said:
Do you still have access to ADB/Fastboot ?
if yes then maybe try flashing main img files like kernel ect.
if no fastboot,i really dunno mate
Click to expand...
Click to collapse
I can have the phone in fastboot and run adb reboot bootloader and it says no devices found although the huawei HiSuite can detect the device being plugged in as it loads up when I plug the phone in

Try that...extract KERNEL from update.app....
in fastboot mode,adb : fastboot flash kernel KERNEL.img
se if this work...

virusdunil said:
Try that...extract KERNEL from update.app....
in fastboot mode,adb : fastboot flash kernel KERNEL.img
se if this work...
Click to expand...
Click to collapse
Not going to lie I am slightly out of my depth here, could you explain that further? I'm assuming I need to download an update.app but I have no idea where from or extracting the kernel from it
thanks

well,you have to dload the same firmware you have on your device...
is it the Oreo from the debrand/rebrand thread ?
if not ,go on teammt and dload your firmware...keep it somewhere safe
open update.zip and extract it...theres an update.app in there.
get the Huawei upade.app extractor here on XDA just type it in search bar or google it...
open the extractor you just dloaded and clik on settings tab...untick the Veryfy the checksum box and save...
click on extract tab and at far right of Update file box,clik on the .. box to search for your update.app you unzipped
if everything done correctly,all files will apperar...
now just right clik on KERNEL.img and select Extract selected.....................................or you can extract all and save them somewhere safe.
after you extracted the image, you have to put the KERNEL.img in your ADB folder in order to flash it
hope it helps

virusdunil said:
well,you have to dload the same firmware you have on your device...
is it the Oreo from the debrand/rebrand thread ?
if not ,go on teammt and dload your firmware...keep it somewhere safe
open update.zip and extract it...theres an update.app in there.
get the Huawei upade.app extractor here on XDA just type it in search bar or google it...
open the extractor you just dloaded and clik on settings tab...untick the Veryfy the checksum box and save...
click on extract tab and at far right of Update file box,clik on the .. box to search for your update.app you unzipped
if everything done correctly,all files will apperar...
now just right clik on KERNEL.img and select Extract selected.....................................or you can extract all and save them somewhere safe.
after you extracted the image, you have to put the KERNEL.img in your ADB folder in order to flash it
hope it helps
Click to expand...
Click to collapse
That Didn't work i just got:
C:\Users\jamie\Desktop\platform-tools>fastboot flash recovery KERNEL.img
target reported max download size of 471859200 bytes
sending 'recovery' (24576 KB)...
OKAY [ 0.528s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.537s
im assuming its due to the bootloader not being unlocked. and in the meantime im running a deepscan on my hard drive to see if I can recover my unlock code which was lost when cloning to a new ssd. It has a few hour left though

you have it wrong...
its fastboot flash kernel KERNEL.img

virusdunil said:
you have it wrong...
its fastboot flash kernel KERNEL.img
Click to expand...
Click to collapse
same thing happened anyway:
C:\Users\jamie\Desktop\platform-tools>fastboot flash kernel KERNEL.img
target reported max download size of 471859200 bytes
sending 'kernel' (24576 KB)...
OKAY [ 0.526s]
writing 'kernel'...
FAILED (remote: Command not allowed)
finished. total time: 0.534s

well......
last try would be to install android studio and sdk tool here
i couldnt flash SYSTEM.img with normal adb... but succeeded with the sdk tool so.....
be patient,its long to install...

virusdunil said:
well......
last try would be to install android studio and sdk tool here
i couldnt flash SYSTEM.img with normal adb... but succeeded with the sdk tool so.....
be patient,its long to install...
Click to expand...
Click to collapse
I have android studio, how do I flash the img with it?

mine got installed in c/user/you/appdata/local/android/sdk/platform tools/
adb should be there...put your .img file there and open comand window ...like other adb

virusdunil said:
mine got installed in c/user/you/appdata/local/android/sdk/platform tools/
adb should be there...put your .img file there and open comand window ...like other adb
Click to expand...
Click to collapse
exactly the same :
C:\Users\jamie\AppData\Local\Android\Sdk\platform-tools>fastboot flash kernel KERNEL.img
target reported max download size of 471859200 bytes
sending 'kernel' (24576 KB)...
OKAY [ 0.533s]
writing 'kernel'...
FAILED (remote: Command not allowed)
finished. total time: 0.542s
Is it maybe worth seeing if I can get the serial number product emei and product id without the os?

Jyndon said:
same thing happened anyway:
C:\Users\jamie\Desktop\platform-tools>fastboot flash kernel KERNEL.img
target reported max download size of 471859200 bytes
sending 'kernel' (24576 KB)...
OKAY [ 0.526s]
writing 'kernel'...
FAILED (remote: Command not allowed)
finished. total time: 0.534s
Click to expand...
Click to collapse
I would say, you did something wrong, maybe false folder, false command or what ever.
If you get access via adb it should work.

kwaichang said:
I would say, you did something wrong, maybe false folder, false command or what ever.
If you get access via adb it should work.
Click to expand...
Click to collapse
I don't know that I do have access though as the device doesn't appear in adb devices list and the bootlaoder is locked.
Although I think I may have found a way of flashing a new bios without bootloader by using the huawei recovery installation.
The default one that uses wifi obviously doent work because its crap but while the device is off I can hold vol+ vol- and power and it loads into an installation screen that shows installation failed but i found that it maybe possible to flash the bios this way by putting the update.app onto the sd card. However the problem I'm having is that windows says the file is too big to copy and unzipping it inside of the sd card doesnt work either. Any ideas as to how I might be able to do it like this? (similar to this: https://android.stackexchange.com/q...are-installation-failed-error-when-booting-up and this too https://forum.xda-developers.com/p9-plus/help/software-install-failed-updating-p9-t3587676)

SOLVED
I managed to get most of the information to unlock the bootloader from the box which I luckily kept, then for the product ID I used https://imei24.com/warranty_info/Huawei/865545034273084/ and it worked perfectly!
Bootloader unlocked and then I used the common HWOTA to rebrand it back to its original firmware.
Thanks to those who helped.

Jyndon said:
So I was trying to restore my rooted p10, I first tried using a twrp restore which didn't work then nothing would boot, so then I decided to reflash the ROM but the software I tried using relocks the bootloader then unlocks it again. So now what I have is my p10 with no custom recovery, a locked booloader and no working os installed. And as I cant boot the phone I cant get the information to get the code to unlock the bootloader. Any one have any ideas that doesn't involve paying for DC unlocker.
thanks
SOLVED: I found the imei on the box and unlocked the bootloader with that info.
Click to expand...
Click to collapse
bro how did you unlock locked bootloader after factory reset and soft bricked after twrp and unrooted , erecovery loop just by using imei code ???

AjSri110 said:
bro how did you unlock locked bootloader after factory reset and soft bricked after twrp and unrooted , erecovery loop just by using imei code ???
Click to expand...
Click to collapse
any update guys? I have the same situation ... erecovery loop with fastboot/adb not available (no device) ...

AjSri110 said:
bro how did you unlock locked bootloader after factory reset and soft bricked after twrp and unrooted , erecovery loop just by using imei code ???
Click to expand...
Click to collapse
I know this is late but none the less, using the emei code I was able to request my code to unlock the bootloader through hwota. You cannot request this code anymore a way so you have to pay for dc unlocker which can rip the unlock code from the device.

petr.hybler said:
any update guys? I have the same situation ... erecovery loop with fastboot/adb not available (no device) ...
Click to expand...
Click to collapse
Is your bootloader unlocked?
If not you have your bootloader unlock code?
If not then you will need to pay for some software to get that code.
From there you can unlock the bootloader and use adb/fastboot again

Request OEM unlock Huawei P10

Hi all,
I have an incorrect firmware installed for my P10 and lots of things are not working (oreo 8.0). I want to re-flash or rollback to other firmwares but problem is I can't get into TWRP anymore. flashing it doesn't work and although I see in fastboot Phone Unlocked and FRP unlock i have the idea it has to do with the OEM unlock not working properly. It's also not available in the developer options. What;s exactly the link to huawei's page where you can request your phone unlock ID ?
Thanks

Whats not working ?
What is it saying when flashing something through fastboot ?

virusdunil said:
Whats not working ?
What is it saying when flashing something through fastboot ?
Click to expand...
Click to collapse
When I go into the bootloader and want to flash TWRP I get following message:
target reported max download size of 471859200 bytes
sending 'recovery_ramdisk' (16494 KB)...
OKAY [ 0.552s]
writing 'recovery_ramdisk'...
FAILED (remote: Command not allowed)
finished. total time: 0.566s

What is the ADB command youre using ?

virusdunil said:
What is the ADB command youre using ?
Click to expand...
Click to collapse
fastboot flash recovery_ramdisk twrporeo.img
and my twrp oreo name is twrporeo.img

Thats why its not working...
TRY....... fastboot flash ramdisk twrporeo.img

virusdunil said:
Thats why its not working...
TRY....... fastboot flash ramdisk twrporeo.img
Click to expand...
Click to collapse
Same problem...:
C:\Android>fastboot flash ramdisk twrporeo.img
target reported max download size of 471859200 bytes
sending 'ramdisk' (16494 KB)...
OKAY [ 0.532s]
writing 'ramdisk'...
FAILED (remote: Command not allowed)
finished. total time: 0.546s

i did a mistake...its really recovery_ramdisk
Look Here...
TWRP

virusdunil said:
i did a mistake...its really recovery_ramdisk
Look Here...
TWRP
Click to expand...
Click to collapse
I already tried that but no success. Did a factory reset and now the bootloader is locked again. How can I unlock the bootloader again?
Thanks

1-is your phone working now ?
for bootloader unlock,do what you did first time... fastboot oem unlock yourcode123
how did you get the last update ?....firmware finder ?

virusdunil said:
1-is your phone working now ?
for bootloader unlock,do what you did first time... fastboot oem unlock yourcode123
how did you get the last update ?....firmware finder ?
Click to expand...
Click to collapse
First of all, I've tried to update from Nougat to Orea via Blackballs method in this thread https://forum.xda-developers.com/p10-plus/development/oreo-update-thread-l29c432-t3729907 with the firmware mentioned there
What is not working:
I've managed to do the first part (oreo install), but:
- SImcard has 'No service
- Can't flash TWRP
- Bootloader / phone locked in Fastboot
- I can't remember how I unlocked the P10 last year (I have a P10 L09-VTR, rebranded to L29-VTR and now 'working' on a VKY P10 plus rom)

Custom ROM / TWRP for Honor 10 Lite?

Hey guys,
I just bought the Honor 10 lite and I am not really a big fan of Huawei's EMUI. That's why I wondered if there is already any custom ROM somewhere out there for this phone? I know it's pretty new and I couldn't find anything so far..
Would still appreciate any information, if somebody knows more about it.
Thanks guys :highfive:

You need to unlock bootloader 1st and that's currently impossible for honor 10 lite with Android 9
Even paid service isn't an option.

Niight Knight said:
You need to unlock bootloader 1st and that's currently impossible for honor 10 lite with Android 9
Even paid service isn't an option.
Click to expand...
Click to collapse
Oh alright, forgot that they stopped providing unlock-code's.. Hope someone figures out something, still not a friend of EMUI.
Thanks for the reply man ?

Niight Knight said:
You need to unlock bootloader 1st and that's currently impossible for honor 10 lite with Android 9
Even paid service isn't an option.
Click to expand...
Click to collapse
I just noticed that with the latest fw update as of today (9.0.1.142), the OEM unlock option can be now changed from the developer options menu, I guess it is still impossible to unlock it but well, now at least it lets you to change the option (before the update it wasn't even possible to do so). I'm not now able to but someone should give it a try to see if by any chance they messed up with OEM...

I think we'll have to wait many months before someone finds an hack to unlock bootloader. This is a very recent smartphone and also Huawei and Honor are not for modding, since it's everything locked and they're not providing unlock codes anymore. Too bad I discovered it after I bought it !

tomax80 said:
I think we'll have to wait many months before someone finds an hack to unlock bootloader. This is a very recent smartphone and also Huawei and Honor are not for modding, since it's everything locked and they're not providing unlock codes anymore. Too bad I discovered it after I bought it !
Click to expand...
Click to collapse
Hello. I have an unlocked Honor 10 Lite, but can't to install Magisk. Who can help me with this question?

Shlendr said:
Hello. I have an unlocked Honor 10 Lite, but can't to install Magisk. Who can help me with this question?
Click to expand...
Click to collapse
How did you unlock the bootloader?
To install magisk you need to install twrp first, then flash magisk zip from there. But there's no twrp for our device so far, maybe you can try running a twrp of a device with our same socket without installing it, from fastboot, and see if it works. For example
Code:
fastboot boot twrpfilename.img
If it works, then you can try flashing magisk from there.

tomax80 said:
How did you unlock the bootloader?
To install magisk you need to install twrp first, then flash magisk zip from there. But there's no twrp for our device so far, maybe you can try running a twrp of a device with our same socket without installing it, from fastboot, and see if it works. For example
Code:
fastboot boot twrpfilename.img
If it works, then you can try flashing magisk from there.
Click to expand...
Click to collapse
I got the phone from presentation. So, it is already unlocked from factory.
I'm not realy understand how can i use the twrpfilename.img? And where i can get this file? Did you have some manual?
I tried to flash twrpkirin.img from Honor 8x, but all system sections are encrypted. So i can't flash magisk.zip
---------- Post added at 08:59 AM ---------- Previous post was at 08:40 AM ----------
tomax80 said:
How did you unlock the bootloader?
To install magisk you need to install twrp first, then flash magisk zip from there. But there's no twrp for our device so far, maybe you can try running a twrp of a device with our same socket without installing it, from fastboot, and see if it works. For example
Code:
fastboot boot twrpfilename.img
If it works, then you can try flashing magisk from there.
Click to expand...
Click to collapse
I have an error:
C:\adb>fastboot boot JSNtwrp.img
downloading 'boot.img'...
OKAY [ 0.550s]
booting...
FAILED (remote: invalid command)
finished. total time: 0.550s

I got the phone from presentation. So, it is already unlocked from factory.
I'm not realy understand how can i use the twrpfilename.img? And where i can get this file? Did you have some manual?
I tried to flash twrpkirin.img from Honor 8x, but all system sections are encrypted. So i can't flash magisk.zip
I have an error:
C:\adb>fastboot boot JSNtwrp.img
downloading 'boot.img'...
OKAY [ 0.550s]
booting...
FAILED (remote: invalid command)
finished. total time: 0.550s
Click to expand...
Click to collapse
There's no manual, just try booting phone in bootloader mode then use that command I told in the previous post. It's just a try , there are no tutorials for this phone so far

TWRP Recovery Honor 10 Lite
tomax80 said:
There's no manual, just try booting phone in bootloader mode then use that command I told in the previous post. It's just a try , there are no tutorials for this phone so far
Click to expand...
Click to collapse
Already done. Got an error

Shlendr said:
Already done. Got an error
Click to expand...
Click to collapse
Ok then probably that version of twrp doesn't work with our phone , we just need to wait for a compatible one.

TWRP Recovery Honor 10 Lite
tomax80 said:
Ok then probably that version of twrp doesn't work with our phone , we just need to wait for a compatible one.
Click to expand...
Click to collapse
I can send all nesessary data of the phone, which will help to creat a workable TWRP. But who can do this?)

Shlendr said:
I can send all nesessary data of the phone, which will help to creat a workable TWRP. But who can do this?)
Click to expand...
Click to collapse
I have no idea sincerely, I think we just need to wait patiently till someone works on it . And it's also not granted that it's going to happen, since it's everything blocked.

guys, what about Android root apps? can those apps help?

TWRP Recovery Honor 10 Lite
cyrusiranmehr said:
guys, what about Android root apps? can those apps help?
Click to expand...
Click to collapse
No

locked after i got into bootloader
hey guys, i tried using bootloader first time and got myself into some situation:
C:\Users\USAKg\AppData\Local\Android\Sdk\platform-tools>adb reboot bootloader
adb server version (39) doesn't match this client (40); killing...
* daemon started successfully
C:\Users\USAKg\AppData\Local\Android\Sdk\platform-tools>fastboot flash recovery_ramdisk twrp_bkl_0.7.img
Sending 'recovery_ramdisk' (23542 KB) OKAY [ 0.711s]
Writing 'recovery_ramdisk' FAILED (remote: 'Command not allowed')
fastboot: error: Command failed
Does anyone know how to unlock this one? or do i have to buy unlock bootloader code?
from site named: global unlocking solutions.miiduu ???

GraveDanger said:
hey guys, i tried using bootloader first time and got myself into some situation:
C:\Users\USAKg\AppData\Local\Android\Sdk\platform-tools>adb reboot bootloader
adb server version (39) doesn't match this client (40); killing...
* daemon started successfully
C:\Users\USAKg\AppData\Local\Android\Sdk\platform-tools>fastboot flash recovery_ramdisk twrp_bkl_0.7.img
Sending 'recovery_ramdisk' (23542 KB) OKAY [ 0.711s]
Writing 'recovery_ramdisk' FAILED (remote: 'Command not allowed')
fastboot: error: Command failed
Does anyone know how to unlock this one? or do i have to buy unlock bootloader code?
from site named: global unlocking solutions.miiduu ???
Click to expand...
Click to collapse
Bootloader is locked and you can't flash anything till it's locked. There are paid services to unlock it but so far our device is not supported. Though there's no sense to pay a lot of money to unlock it, also if it was supported, just to have root (if you're lucky) , since there are no custom ROMs for Honor 10 lite. Our device is not made for modding. The only solution on my opinion is to wait patiently till someone finds an hack to unlock it for free, or sell your phone and buy a Xiaomi. You can unlock bootloader very easily and there are plenty of custom ROMs for it.

TWRP Recovery Honor 10 Lite
GraveDanger said:
hey guys, i tried using bootloader first time and got myself into some situation:
C:\Users\USAKg\AppData\Local\Android\Sdk\platform-tools>adb reboot bootloader
adb server version (39) doesn't match this client (40); killing...
* daemon started successfully
C:\Users\USAKg\AppData\Local\Android\Sdk\platform-tools>fastboot flash recovery_ramdisk twrp_bkl_0.7.img
Sending 'recovery_ramdisk' (23542 KB) OKAY [ 0.711s]
Writing 'recovery_ramdisk' FAILED (remote: 'Command not allowed')
fastboot: error: Command failed
Does anyone know how to unlock this one? or do i have to buy unlock bootloader code?
from site named: global unlocking solutions.miiduu ???
Click to expand...
Click to collapse
Hello. What the twrp_bkl_0.7.img? Where did you get it?) Is it workable?

You can always install a different launcher like Nova Launcher

this link claims you can use TWRP from Huawei P9 lite
https://unofficialtwrp.com/root-twrp-hry-lx1-hry-lx2-hry-al00

Rooting my Mi A2

Hi!
I am trying to root my Mi A2 without unlocking the bootloader. I have tried:
C:\Users\Dell\Desktop\root>fastboot boot TWRP.img
downloading 'TWRP.img'...
OKAY [ 1.025s]
booting...
FAILED (remote: Flashing is not allowed in Lock State)
finished. total time: 1.183s
I wasn't trying to flash, I was going to boot from the TWRP image. Theoretically I could boot to TWRP temporarily and then flash magisk or something.
I have considered using another thread's guide to unlocking the bootloader without the data wipe. The only thing is, I don't want a wipe operation still pending in recovery so if I ever decided to boot to recovery it would delete my data. I don't know if when I hold the volume button it will go back to fastboot mode and I know that I can temporarily boot to TWRP and flash, but still.
Help???

I think its not possible, you need to unlock the bootloader to root the device

vmf9911833 said:
I think its not possible, you need to unlock the bootloader to root the device
Click to expand...
Click to collapse
You cannot flash unsigned software without unlocking LE bootloader.
oem unlock, retry. I can fastboot boot official twrp, but it bootloops afterwards.