Related
Q&A for [ROM][PORT][4.4.4][ALPHA3] MIUI V5 Titan
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][PORT][4.4.4][ALPHA3] MIUI V5 Titan. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Problema com Xt 1068 (Problem with Xt 1068)
Mano Eu instalei tudo certinho no meu aparelho .. mas ele fica sem Sinal de operadora, a versão do meu cel é xt1068 ,, uso somente 1 chip .. mas não adiantou, :/ .. me ajuda ai ..
"Mano I installed everything right on my device .. but he is no carrier signal, the version of my cel is xt1068 ,, use only one chip .. but to no avail,: / .. help me there .."
Mobile connection doesn't work on 1068 for now, hopefully it will be fixed in a future version.
Hi, nice Work. I have a xt1068 and works fine. Only the RIL doesn't work, but otherwise doing well .
Sorry for my bad English.
Hola, buen trabajo. Tengo un xt1068 y funciona perfecto. Solo el RIL es lo que no funciona pero por lo demás va perfecto. Perdón por mi pésimo inglés.
Tester for Miui V6 on moto g 2014 - xt 1068
Hello friend, if you want I'm interested in becoming a beta tester on Miui, regardless if MIUI V5 or V6 if accepted me, comes into contact by email> chrstnbrito34 @ gmail.com .. I will be waiting for response, hugs
Eagerly waiting for the fix !!
Is there any fix for the gps
Hope the ril issues gets fixed soon...
Love the miui rom and the fiui rom
is RIL works for XT1068
@JBCDroid i used all your works thanks for your development for titan whether boot logo,titan z and miui v5:angel:. please fix the RIL issue for XT 1068.i hope you can fix it waiting for the new build.thanks for your work:highfive::fingers-crossed::fingers-crossed:
XT1068
ChrisbritoBr said:
Mano Eu instalei tudo certinho no meu aparelho .. mas ele fica sem Sinal de operadora, a versão do meu cel é xt1068 ,, uso somente 1 chip .. mas não adiantou, :/ .. me ajuda ai ..
"Mano I installed everything right on my device .. but he is no carrier signal, the version of my cel is xt1068 ,, use only one chip .. but to no avail,: / .. help me there .."
Click to expand...
Click to collapse
Infelizmente ainda nao esta funcionando em aparelhos dual sim...
Not a question, just saying here to not pollute the original post: GOD i need MIUI on my phone! Previously i had a galaxy s2, full time miui rom. Now i am waiting for it to work on dual sim model. Make some miracles peeps.
did the RIL work in ur device??
Progress of RIL
Have you done any progress on the ril bug in dual Sim phones??
gps
theres any fix to the gps bug? i really really wanna try this rom . im on xt1063
Need Help!!!!!!
I know it is for xt1064 single sim version , but i owe a xt1068 dual sim version.... i successfully flashed it but as mentioned above sim is not working ... what i want to know is , is ter any way to make my devices to detect atleast 1 sim?
Is there a dual sim fix like the one from luca020400 available for kitkat somewhere?
( http://forum.xda-developers.com/moto-g-2014/development/mod-single-sim-rom-to-dual-sim-t3002528 )
i want to knw that unlike samsung, do we have to root motog2 also, or simple we can flash the zip files in recovery mode. please tell me the steps from starting and also tell me which files to flash from above so many versions or we have to flash all the given files??? thanking you
miui estável moto g 2014?
Alguem sabe de uma ROM estável pro nosso moto g 2?
KpKumar
Hello, I really glad to use MIUI on our single sim mobiles. But I bought MOTOROLA MOTO G 2 (XT1068), a dual sim mobile. I installed this rom on that device. But unfortunately it is not working. Please try to develop a new rom for dual sim mobiles. Hope you can develop. Eagerly we are waiting for the rom.
Eagerly waiting for the dual sim to be worked.
G9650ZHU2ARE6 debloated, deknoxed, RMM removed, Verity removed.
Make sure you run CROM and Enable OEM UNLOCK in developer settings.
You need to format data to remove encryption from the data partition. TWRP does not support data decryption on Samsung devices.
FLASHING ANY CUSTOM BINARY WILL TRIP THE KNOX COUNTER
PLEASE MAKE A COMPLETE SYSTEM BACKUP INCLUDING EFS SO YOU CAN RESTORE FROM ANY SITUATION. USE SOME COMMON SENSE PLEASE.
CROM: https://www.androidfilehost.com/?fid=818070582850505818
G9650ZHU3ARJ1 Rom Download: https://www.androidfilehost.com/?fid=11410963190603861192 (updated Nov,28th,2018)
Travis_Kernel 1.2.3: https://www.androidfilehost.com/?fid=11410963190603861188 (updated Nov,28th,2018)
Combination Firmware G9650ZCU1ARB8: https://www.androidfilehost.com/?fid=746163614322266593 (frp or drk locked? than flash stock firmware after you factory reset) (Bootloader V1)
Combination Firmware G9650ZCU2ARE6: https://drive.google.com/open?id=1hvgBymnBLasH7fnA5DgkFQQ3k27jIWZX (frp or drk locked? than flash stock firmware after you factory reset) (Bootloader V2)
Sources
Kernel: https://github.com/travismills82/android_kernel_samsung_sdm845
Sources LineageOS 16.0
Vendor: https://github.com/travismills82/vendor_samsung_sdm845-common
Device S9: https://github.com/travismills82/android_device_samsung_starqlte
Device S9 plus: https://github.com/travismills82/android_device_samsung_star2qlte
sdm845-common: https://github.com/travismills82/android_device_samsung_sdm845-common
kernel: https://github.com/travismills82/android_kernel_samsung_sdm845/tree/lineage-16.0
Regards,
Travis82
travis82 said:
G9650ZCU1ARC2 debloated, deknoxed, RMM removed, Verity removed.
Download: https://www.androidfilehost.com/?fid=818070582850500937
This is for when TWRP is available publicly.
Regards,
Travis82
Click to expand...
Click to collapse
Thankz!!! I do not get any firmware for this model :crying:
travis82 said:
G9650ZCU1ARC2 debloated, deknoxed, RMM removed, Verity removed.
Download: https://www.androidfilehost.com/?fid=818070582850500937
This is for when TWRP is available publicly.
Regards,
Travis82
Click to expand...
Click to collapse
Excellent, thank you!
Is there any chance in the future to include my country's CSC?
---------- Post added at 08:22 AM ---------- Previous post was at 08:16 AM ----------
gergonorama said:
Thankz!!! I do not get any firmware for this model :crying:
Click to expand...
Click to collapse
I already had an update in my country, SamFirm seems to find it
I already had an update in my country, SamFirm seems to find it
---------- Post added at 01:15 PM ---------- Previous post was at 01:15 PM ----------
you have the link?
gergonorama said:
I already had an update in my country, SamFirm seems to find it
---------- Post added at 01:15 PM ---------- Previous post was at 01:15 PM ----------
you have the link?
Click to expand...
Click to collapse
Sure, here it is: https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
The tool still works, it just downloaded my firmware
Monigote97 said:
Sure, here it is: https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
The tool still works, it just downloaded my firmware
Click to expand...
Click to collapse
Thamkz!
Monigote97 said:
Sure, here it is: https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
The tool still works, it just downloaded my firmware
Click to expand...
Click to collapse
What region do I put?
gergonorama said:
View attachment 4452928
What region do I put?
Click to expand...
Click to collapse
That depends on your country and carrier, where you from?
Monigote97 said:
That depends on your country and carrier, where you from?
Click to expand...
Click to collapse
tell me what you put please because I'm from Argentina and does not figure in my region
gergonorama said:
tell me what you put please because I'm from Argentina and does not figure in my region
Click to expand...
Click to collapse
Oh my bad, I thought you did not know what to put in region. I put TCE (Mexico, Telcel)
Monigote97 said:
Oh my bad, I thought you did not know what to put in region. I put TCE (Mexico, Telcel)
Click to expand...
Click to collapse
thankz!!
gergonorama said:
thankz!!
Click to expand...
Click to collapse
Let me know if anything else ??
There seems not to be any kind of development for our model
---------- Post added at 10:41 AM ---------- Previous post was at 10:41 AM ----------
[/COLOR]
Monigote97 said:
Let me know if anything else ?
There seems not to be any kind of development for our model
Click to expand...
Click to collapse
everything perfect !! , waiting for the recovery
gergonorama said:
---------- Post added at 10:41 AM ---------- Previous post was at 10:41 AM ----------
[/COLOR]
everything perfect !! , waiting for the recovery
Click to expand...
Click to collapse
Yeah, let's hope it does not take too long, I miss root.
Monigote97 said:
Yeah, let's hope it does not take too long, I miss root.
Click to expand...
Click to collapse
Me too!!!!
gergonorama said:
Me too!!!!
Click to expand...
Click to collapse
I don't know why we got the 0 model instead of the F this time
Monigote97 said:
I don't know why we got the 0 model instead of the F this time
Click to expand...
Click to collapse
Hello Monigote.
I'm from México too, it's alowed write in spanish? This firmware is installed through ODIN?
Regards!
hmguerrero said:
Hello Monigote.
I'm from México too, it's alowed write in spanish? This firmware is installed through ODIN?
Regards!
Click to expand...
Click to collapse
Si através de Odin
gergonorama said:
Si através de Odin
Click to expand...
Click to collapse
Muchas gracias, estoy un poco perdido, el firmware que se instala mediante ODIN es el que se descarga mediante la herramienta de SamFirm si no entiendo mal.
Pero el firmware que originalmente abre este post también se puede mediante ODIN?
Muchas gracias.
Saludos!
hmguerrero said:
Hello Monigote.
I'm from México too, it's alowed write in spanish? This firmware is installed through ODIN?
Regards!
Click to expand...
Click to collapse
gergonorama said:
Si através de Odin
Click to expand...
Click to collapse
hmguerrero said:
Muchas gracias, estoy un poco perdido, el firmware que se instala mediante ODIN es el que se descarga mediante la herramienta de SamFirm si no entiendo mal.
Pero el firmware que originalmente abre este post también se puede mediante ODIN?
Muchas gracias.
Saludos!
Click to expand...
Click to collapse
¡Excelente, que gusto! ??
Sí podemos escribir en español siempre y cuando pongamos la traducción en inglés de lo que hablemos en la misma publicación.
Como bien te dijo @gergonorama se instala através de odin, te recomiendo que utilices la última versión de odin que es la 3.13.1
Y sí, el firmware que descargas con samfirm es el que utilizarás con odin. El firmware que abre este post no se puede instalar con odin, es únicamente mediante un recovery (TWRP), que al momento, aún no tenemos para nuestro G9650.
Excellent! ??
Yes, we can write in Spanish as long as we also write the same we talked about in English.
As @gergonorama told you, it is installed through Odin, I recommend you the lastest version 3.13.1
Yes, the firmware you download with samfirm is the one you install with Odin. The firmware in the first post can only be flashed with a recovery (TWRP), wich at the moment, we don't have for our G9650 model.
So my problem started going from custom to stock rom. The only time i can access twrp is after flashing the stock rom . However with stock my imei and lte are gone . ive tried the work arounds for this and can get my lte back the problem is that when i go back to twrp to back up efs im locked out by a code i didnt set . i have yet to get gapps to flash on the custom rom error 20 .what do i do ? i have a phone but no gapps
RESPUESTA twrp
1976sam said:
So my problem started going from custom to stock rom. The only time i can access twrp is after flashing the stock rom . However with stock my imei and lte are gone . ive tried the work arounds for this and can get my lte back the problem is that when i go back to twrp to back up efs im locked out by a code i didnt set . i have yet to get gapps to flash on the custom rom error 20 .what do i do ? i have a phone but no gapps
Click to expand...
Click to collapse
hola amigo flashea este recovery TWRP este deja hcaer copias de seguridad de room de 64 bit adermas no pide el codigo twrp 3.2.1 r20 esta en este enlñace https://androidfilehost.com/?w=files&flid=216298
orland25 said:
hola amigo flashea este recovery TWRP este deja hcaer copias de seguridad de room de 64 bit adermas no pide el codigo twrp 3.2.1 r20 esta en este enlñace https://androidfilehost.com/?w=files&flid=216298
Click to expand...
Click to collapse
WOW I MADE A HUGE MISTAKE ! Thank you very much my friend ! Everything is back to working and im back to stock !
1976sam said:
WOW I MADE A HUGE MISTAKE ! Thank you very much my friend ! Everything is back to working and im back to stock !
Click to expand...
Click to collapse
How did you get IMEI on stock .?
forum.xda-developers.com/moto-g5s-plus/how-to/guide-workaround-network-imei-0-t3745474 i used this method . It worked great however to get volte you will need to find that post in guides forum . Im a hobbiest on this satuff and it was pretty easy to fix these issues once i installed the 64 bit recovery
Model SM-G610M
Model name Galaxy J7 Prime
Country PANAMA
Version Android 8.1.0
Changelist 14381225
Build date Tue, 25 Sep 2018 10:03:28 +0000
Security Patch Level 2018-08-01
Product code TPA
PDA G610MUBU3CRI5
CSC G610MUUB3CRI3
LINK:
HTML:
https://www.sammobile.com/firmwares/galaxy-j7-prime/SM-G610M/TPA/download/G610MUBU3CRI5/238242/
thanks :3
I just install this one with the CSC_Home. It means without wipes. And from the millennium ROM
no sirve el flash frontal
Grom9A said:
I just install this one with the CSC_Home. It means without wipes. And from the millennium ROM
Click to expand...
Click to collapse
I did the same
Fix Front flash for G610M (Magisk Module i test it in Stock G610m 8.1)
https://drive.google.com/file/d/1YYG...ew?usp=sharing
The kernel version is prerelease (gcc version 4.9.x 20150123). Hardly Samsung would do the ROM on the prerelease software. Maybe this is a test ROM aired via OTA by mistake?
gabrielunm said:
Fix Front flash for G610M (Magisk Module i test it in Stock G610m 8.1)
https://drive.google.com/file/d/1YYG...ew?usp=sharing
Click to expand...
Click to collapse
The link doesn't work, it's happening just for me? If yes, can someone post again (fixed)?
Enviado de meu SM-G610M usando o Tapatalk
BetaTesterCrazy said:
The link doesn't work, it's happening just for me? If yes, can someone post again (fixed)?
Enviado de meu SM-G610M usando o Tapatalk
Click to expand...
Click to collapse
Sorry i lost the fix but I make this rom,
https://drive.google.com/file/d/1ItoO7Lf6yiBneNTACfeMF4uKnL5rdn2i/view?usp=drivesdk
Have build.prop tweak, init.d support, Fix frontal flash,
Badlock apps, s8 launcher, bixby, magisk and more things.
WARNING! Do NOT upgrade the bootloader!
A new bootloader is including rollback prevention mechanism. A "RP SWREV" string appeared which was not there. Right now it is "B3 K2 S2".
abittercoffee73 said:
WARNING! Do NOT upgrade the bootloader!
A new bootloader is including rollback prevention mechanism. A "RP SWREV" string appeared which was not there. Right now it is "B3 K2 S2".
Click to expand...
Click to collapse
Thats why i can't flash a custom recovery
@Bode327
Help
Hi how are you doing? I need help, buy a j7 prime (g610m) Argentina which is stuck in android 7.0, on the web of sammobile I found a rom 8.1 from panama
PDA G610MUBU3CRI5
CSC G610MUUB3CRI3
and my version is baseband g610mubs2brh1
compilation
nrdm90m.g610mubs2brh2
Can you use the panama version? or will I have a problem with the signal?
Johncobain7 said:
Hi how are you doing? I need help, buy a j7 prime (g610m) Argentina which is stuck in android 7.0, on the web of sammobile I found a rom 8.1 from panama
PDA G610MUBU3CRI5
CSC G610MUUB3CRI3
and my version is baseband g610mubs2brh1
compilation
nrdm90m.g610mubs2brh2
Can you use the panama version? or will I have a problem with the signal?
Click to expand...
Click to collapse
Do not upgrade right now! Better wait until official update for more regions will be released.
---------- Post added at 04:11 PM ---------- Previous post was at 03:26 PM ----------
By the way: can I downgrade the bootloader with the tickbox "update phone bootloader" selected in Odin and then selecting the previous versions of bootloader? Apparently not.
nuevo parche de seguridad 1 de noviembre
reparado flash cámara frontal, las animaciones de instalación siguen rotas
Johncobain7 said:
Hi how are you doing? I need help, buy a j7 prime (g610m) Argentina which is stuck in android 7.0, on the web of sammobile I found a rom 8.1 from panama
PDA G610MUBU3CRI5
CSC G610MUUB3CRI3
and my version is baseband g610mubs2brh1
compilation
nrdm90m.g610mubs2brh2
Can you use the panama version? or will I have a problem with the signal?
Click to expand...
Click to collapse
You can use any of the Roms in this forum or the Rom from Panama too.
gimnly said:
reparado flash cámara frontal, las animaciones de instalación siguen rotas
Click to expand...
Click to collapse
Thank you. Can confirm that flash is now working.
gregodadone said:
You can use any of the Roms in this forum or the Rom from Panama too.
Click to expand...
Click to collapse
thanks for the info.
new query, I have a second j7 prime which came with 6.0 from factory, update via odin only pda and csc (home) but still contains bloatware of movistar, if I flash all files (boot, pda, csc and others) more hard reset It should be totally clean, right? and then do the same process for the two phones to go to 8.1 with the panama version
Full work
Johncobain7 said:
thanks for the info.
new query, I have a second j7 prime which came with 6.0 from factory, update via odin only pda and csc (home) but still contains bloatware of movistar, if I flash all files (boot, pda, csc and others) more hard reset It should be totally clean, right? and then do the same process for the two phones to go to 8.1 with the panama version
Click to expand...
Click to collapse
Gente, instale mediante una instalacion limpia desde odin con los 4 archivos la version 8.1.0 de panama, y funciona perfectamente! El que este interesado en tener oreo ahi tienen la confirmacion de que funciona al 100% sin bugs por ahora. Tuve que mirar en youtube unos videos para descomprimir y comprimir nuevamente los archivos del nuevo firmware dado a que vienen con un formato no soportado por odin
Hi all i stumbled across this site to find a solution to repair my softbricked Xiao mi Redmi note 115g i bought it from china and tried to install global rom and now its stuck in a bootloop and i would like to find some help
Hola a todos, a ver si encuentro aqui lo que quiero, gracias por la bienvenida.
Mod translated via GT: Hello everyone, let's see if I find here what I want, thanks for the welcome.
ItsYaBoiBeyonce said:
Hi all i stumbled across this site to find a solution to repair my softbricked Xiao mi Redmi note 115g i bought it from china and tried to install global rom and now its stuck in a bootloop and i would like to find some help
Click to expand...
Click to collapse
marcosrg64 said:
Hola a todos, a ver si encuentro aqui lo que quiero, gracias por la bienvenida.
Mod translated via GT: Hello everyone, let's see if I find here what I want, thanks for the welcome.
Click to expand...
Click to collapse
Hello all and weocome to XDA!