New to using Odin, Note 5 crashed and try to fix it by flashing with Odin. Downloaded the MD5 file and every time I try to flash it I get a big "FAIL" at modem.bin. Thoughts?
This is what I get. Please help!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920VVRS3BPI1_N920VVZW3BPI1_N920VVRS3BPI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> modem.bin
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Did you solve this yet? Same issue here!
what version odin you using?
What firmware you want to flash?downgrade or upgrade?
Related
Hi all,
I wanted to flash a custom ROM onto my new note 3. the first time I flashed it using ODIN it finished and passed but would not boot up. now when I try flashing it fails every-time with the below!
I live in the UK and bought the phone from carfone warehouse its on Vodafone so I have downloaded the Vodafone ROM from sam mobile.
I really need some help with this and its driving me crazy! I've been working on this for 8 hours now and just can't get it to work. it seemed to happen and stop passing via ODIN when I did a repartition by mistake
Any help would be greatly appreciated.:good:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMJ6_N9005VFGDMJ1_N9005XXUDMJ4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
When i setup Rom Stock 4.1.2 I9305TDVBME2_I9305TTELBME1_TEL by Odin, i have problem. I can't setup to my phone, allway FAIR z :
in Odin :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9305TDVBME2_I9305TTELBME1_I9305TDVBME1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> recovery.img
<ID:0/003> modem.bin
<ID:0/003> tz.img
<ID:0/003> sboot.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
in phone :
Unsupported Version
I think may be i setup wrong Rom
Plz help me, thanks
Ok.. problem is
<OSM> P7300XWLC3_P7300XXKJ6_P7300SFRLC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> boot.img.md5
<ID:0/012> NAND Write Start!!
<ID:0/012> cache.img.md5
<ID:0/012> hidden.img.md5
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P7300OXAKJ6_P7300XXKJ6_P7300XXKJ6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img.md5
<ID:0/003> NAND Write Start!!
<ID:0/003> bootloader.bin.md5
<ID:0/003> cache.img.md5
<ID:0/003> hidden.img.md5
<ID:0/003> recovery.img.md5
<ID:0/003> system.img.md5
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Whats wrong? why i can't install original rom?
Please upload bootloader, CSC, Phone, PDA files stock rom.
Or upload P7300ZSKK2_P7300ZZHKK2_TGY.zip
Why do you want this one specifically??
It seems your file is corrupted, so the best solution is to download the latest Odin firmware,
And so here is a link for the latest Samsung firmware for P7300:
SAMMobile.com-GT-P7300-XFV-P7300XXLQJ-P7300XFVLP4.zip - 485.49 MB
Download extract and flash through Odin and enjoy
Sent From My New Xperia Z1 Compact (Xperia U I shall put you in the garbage )
Hello
i want to go back to original stock rom. I privously had nameless rom (kitkat). I downloaded the stock rom from sammobile and flashed the rom via odin. In odin
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P7300XXLQD_P7300OXXLP5_P7300XXLQ6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img.md5
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.md5
<ID:0/003> hidden.img.md5
<ID:0/003> modem.bin.md5
<ID:0/003> recovery.img.md5
<ID:0/003> system.img.md5
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
than the tab restarts. but than it stocks on the samsung screen and doesnt complete the booting process.
what did i do wrong?
knorki said:
Hello
i want to go back to original stock rom. I privously had nameless rom (kitkat). I downloaded the stock rom from sammobile and flashed the rom via odin. In odin
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P7300XXLQD_P7300OXXLP5_P7300XXLQ6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img.md5
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.md5
<ID:0/003> hidden.img.md5
<ID:0/003> modem.bin.md5
<ID:0/003> recovery.img.md5
<ID:0/003> system.img.md5
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
than the tab restarts. but than it stocks on the samsung screen and doesnt complete the booting process.
what did i do wrong?
Click to expand...
Click to collapse
Flash CWM 5.5.0.4 through odin then enter it and do a full wipe [format /system & /data]
then flash the ROM again.
If that didn't work, then download another odin stock ROM and flash it, here is the latest one
omarainea said:
Flash CWM 5.5.0.4 through odin then enter it and do a full wipe [format /system & /data]
then flash the ROM again.
If that didn't work, then download another odin stock ROM and flash it, here is the latest one
Click to expand...
Click to collapse
thx full wipe and flash again worked
Issues began when I installed Lollipop on rooted phone. When flashing a custom rom it will not boot up. I cannot get to a recovery screen but can put it in download mode (Odin). I have downloaded the stock ATT rom and attempted to flash with odin but it fails everytime. I get the following on the screen.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
I have updated the samsung drivers and do not know where to go from here. any help is appreciated.
Gdogius