Have a 32B. It broke, so I swapped the insides of that one into another G1. The G1 boots into recovery, there's no ROM flashed on the Phone. I tried to mount the SD to PC. It shows that there's a disc connected. But it wont open it. The SD card will mount in my other phones, and connect to the PC via USB, USB dongle, and SD Adapter. I can't flash ROM's via recovery. All i get is this error:
Build : RA-dream-v.1.7.0
E:Can't mount /dev/block/mmcblk0
p1 (or /dev/block/mmcblk0)
(No such file or directory)
E: Can't mount SDCARD:
So I was like meh, I'll flash the ROM via ADB
ADB Isn't working either
just saying "device not found".
Anybody have any clue what this means?
Here's something to try:
Back up all the stuff on your SDCard to your computer using USB.
Unmount the SDCard from the computer.
Go to Settings/SD card, and unmount the card and select format.
(at this point I would turn on your WiFi if you have is to facilitate the faster Rom download your about to to, but it's not necessary)
Go to Rom Manager and select download Rom, and choose the one you want.
If its a cyanogen one, you will be asked to install google apps (gapps), Yes. Backup Current rom, Yes
When asked to reboot to install the Rom, Yes
If all this works out, replace you stuff on to your SDCard
Good luck, and let me know how you make out!
That would work, but my board has no ROM flashed on it. Can't access SD Card in Recovery. Can't push the rom to data with ADB.
Man, here's two way for this situation:
1. (Good) You just updated your radio in a wrong way. Try to do this right
2. (Bad) Your phone now is just a brick. You can use it like a hammer
Hope, your way is first. Try to reinstall radio, bootloader etc.
Litesorrows said:
That would work, but my board has no ROM flashed on it. Can't access SD Card in Recovery. Can't push the rom to data with ADB.
Click to expand...
Click to collapse
my g1 doesnt detect memory card....but dats because the thing that reads the sd card is loose but if i press on the bottom of the phone it reads...you could try that..but again you will have to keep on pressing on the bottom so that it flashes the entire rom works for me.
one question though how do you flash a rom via adb???
I know for a fact it's not bricked. It's just I took the board from my 1st G1, 2708+ and Everthing. Worked perfectly. Then i just put it inside a "New" G1 b/c that on didn't boot. The G1 boot's into Recovery, just wont access SD card. I hate my iPhone Xo that's the only phone I currently have. Don't let meh use iOS YoY.
I'll post Pic's soon. All I have is a ****ty 3G, and it's not on iOS so no autofocus. Unless a blurry cam pic can help. Otherwise I'll wait for the wife to get home with the Nokia.
Waiting for pictures!) А тут часом никто русский не затесался?)))
It happened after formatting it with NTFS (it was a temporary thing so I can use it with one of Microsoft services), and my device is working and rebooting properly without any error messages..So what can I do now to make my SD working again?
(I don't really need the data that was on it, I just need the card to work)
Thanks..
ramy670 said:
It happened after formatting it with "Windows7-USB-DVD-Download-Tool" (I was trying to use it as USB flash memory in order to install windows), and my device is working and rebooting properly without any error messages..So what can I do now to make my SD working again?
(I don't really need the data that was on it, I just need the card to work)
Thanks..
Click to expand...
Click to collapse
try formatting the card from within CWM, i presume if you boot up the phone you can't mount/unmount it and subsequently format it from within Android.
but i would try fromating it as FAT32 from within Windows 7 first, NTFS is not supported by Android to the best of my Knowladge...
Thanks, yes I can't format it in Android since i can't mount it, I've already tried formatting it from CWM with no luck, it showed this:
Formatting /sdcard...
Error mounting /sdcard!
Skipping format...
Done.
And windows doesn't see the card at all when I connect phone to PC, so I can't use windows to format it too.
ramy670 said:
so I can't use windows to format it too.
Click to expand...
Click to collapse
Try a formatting tool or recovery tool in My Android Collections
olaf2k4
Turned out you're right, the problem is android not being able to handle NTFS properly, I tried to format external SD card with NTFS to see what will happen, and I had the EXACT same symptoms, but of course I removed from phone and had it formatted using card reader and it's working properly now with my phone..
xsenman
The problem now is that windows can't see internal card at all, I've tried one of format tools form the link you put, but it didn't help since phone "doesn't allow" windows to detect the memory, any other way to do it? right now I'm trying this:
http://forum.xda-developers.com/showthread.php?t=1724078
It seems like it isn't easy to install NTFS support from the link above (since you need fuse.ko file that should be compiled for both your device and ROM), is there any kernal that support NTFS or any other easy way to do it?
If you are talking about your external sd just format at fat32. This is standard for sdcards and your phone wil reconize your card..
Unfortunately it is the internal one..
ramy670 said:
Unfortunately it is the internal one..
Click to expand...
Click to collapse
ny solutions?? :crying:
me facing same problems... phone doesn't detects internal sd, neither it connects to pc via mass storage... :crying:
I don't care about the data in it even if its gone, I jus want my internal sd back...
Anyone?..
Swaps100050 said:
ny solutions?? :crying:
me facing same problems... phone doesn't detects internal sd, neither it connects to pc via mass storage... :crying:
I don't care about the data in it even if its gone, I jus want my internal sd back...
Click to expand...
Click to collapse
Finally, I found a solution, just do the following (I tried it and it worked):
1. First install the drivers ONLY if you haven`t already installed them, also if you have Kies installed there is no need to install these drivers, but you are better off installing these anyway : http://dev-host.org/ZRA
2. Download this package (it includes i9000 stock rom+kernel+odin) : http://dev-host.org/RAE, if you have a Captivate or a Vibrant just download a stock rom for your phone model and find a kernel which has root and cwm in it.
NOTE : The next step will require using the 3 key combo for accessing the clockworkmod recovery and also the download mode.The 3 key combo used below is for the Samsung Galaxy S GT-i9000. If you own a Captivate or a Vibrant please click this link and choose your phone model to see what 3 key combo must be used, as it differs from one phone model to another : http://tinyurl.com/6q6ajpx
3. After you have extracted all the contents you downloaded and installed drivers, put your phone into download mode using the 3 key combo : volume DOWN + home button+power button, keep those pressed until it goes into download mode.
4. Connect phone to PC via USB Cable and open Odin (windows should detect the phone and install some drivers, after it`s finished you should see the message "Added!" in Odin which means Odin succesfully detected your phone so now you are ready to flash)>check Re-Partition Option>press PIT button and browse for the s1_odin_20100512.pit file, press BOOTLOADER button and browse for the APBOOT… file, press PDA button and browse for the CODE….file, press PHONE button and browse for the MODEM….file, press CSC button and browse for the GT-I9000-CSC….file. PRESS START button and wait for the green pass notification in Odin.
• When the phone reboots into the rom, wait for the setup wizard to appear and then just use the 3 key combo into the download mode again.
Close Odin and open it again> press PDA button and browse for CF-Root…file> Press START button and wait for the green pass notification in Odin.
Click to expand...
Click to collapse
ramy670 said:
Finally, I found a solution, just do the following (I tried it and it worked):
Click to expand...
Click to collapse
No need to do all this.
Just:
- remove external sd card (if you have one inserted)
- reboot into CWM-based recovery
- mounts and storage
- mount USB storage
You will be able to see and format, FAT32, the disk using windows
N3tMast3r said:
No need to do all this.
Just:
- remove external sd card (if you have one inserted)
- reboot into CWM-based recovery
- mounts and storage
- mount USB storage
You will be able to see and format, FAT32, the disk using windows
Click to expand...
Click to collapse
hello, i also did this stupid mistake on my part. Formatted the Internal memory of my Pantech Burst to NTFS. Now its unformattable, unmountable etc. I tried ur way, but it throws up an error
"Unable to write to ums lunfile (no such file or directory)"
wat to do ?
Swaps100050 said:
ny solutions?? :crying:
me facing same problems... phone doesn't detects internal sd, neither it connects to pc via mass storage... :crying:
I don't care about the data in it even if its gone, I jus want my internal sd back...
Click to expand...
Click to collapse
what i did was to go in recovery mode...mount usb ...conect to pc and reformat to fat 32..
harryneopotter said:
hello, i also did this stupid mistake on my part. Formatted the Internal memory of my Pantech Burst to NTFS. Now its unformattable, unmountable etc. I tried ur way, but it throws up an error
"Unable to write to ums lunfile (no such file or directory)"
wat to do ?
Click to expand...
Click to collapse
Are u able to wipe data/factory reset? If u are able to do so do it and then follow my procedure... if u are not able, try to follow my procedure more carefully. It is the only thing I can suggest, sorry
N3tMast3r said:
Are u able to wipe data/factory reset? If u are able to do so do it and then follow my procedure... if u are not able, try to follow my procedure more carefully. It is the only thing I can suggest, sorry
Click to expand...
Click to collapse
I tried your method, but selecting "Mount USB" was throwing the error i mentioned in my last post. Though i solved it eventually. Somehow i ended up in the phone's own recovery/bootloader menu, had an option of "Low level format" there. Took around an hour or so .. but it worked :good:
Hi people, i just got my rPI model B. It came with noobs pre installed on sd card 8 gb class 4 and i decided to install Raspbmc. At the end of the installing it said was all ok but when i boot it appears Jounarl commit i/o error and doenst boot to xmbc. How i fix that?
thanks
Try to flash one of the images "without a fancy installer" and use win32 disk imager to flash the image. (on mac/Linux use dd if=/path/to/Img.img of=/dev/sdX)
Sent from my HTC One X using Tapatalk
ok I will try. I have to read first how to flash because I am a noob thats why i used NOOBS xD
scjoao said:
Hi people, i just got my rPI model B. It came with noobs pre installed on sd card 8 gb class 4 and i decided to install Raspbmc. At the end of the installing it said was all ok but when i boot it appears Jounarl commit i/o error and doenst boot to xmbc. How i fix that?
thanks
Click to expand...
Click to collapse
While the Pi is booting hold shift on your keyboard to go into recovery. Raspbmc should be selected by default. Click the edit config and if possible please paste what you have there. I can give you a hand. I just built my Raspbmc machine this last weekend.
scjoao said:
ok I will try. I have to read first how to flash because I am a noob thats why i used NOOBS xD
Click to expand...
Click to collapse
Easy as pi,
Go to the downloads section of raspbmc and get a bare image (under the label "without a fancy installer")
While you're downloading the image search for 'win32 disk imager" (it's on sourceforge), and download it.
Insert your sdcard into your computer.
Start win32diskimager, select your sdcard letter (g: or so), select your freshly downloaded .img (It might be zipped) and press 'write'
When the progress is complete, safely eject the sdcard and put it back in you pi.
Now:
The Pi tends to corrupt sdcards when they are overclocked (which xbmc distros do), so it might be a wise decision to install raspbmc on a flashdrive and use that to boot (and locking the sdcard). Google is your friend for that!
Sent from my HTC One X using Tapatalk
I followed the instruction on rasbmc website ( same that u said), but first I formated the sd card with with SDformatter. The setup ran well, it did all the remaining downloads and installations. A final message appeared saying the setup will continue after reboot but when it rebooted the screen goes of. Nothing appears. I read about it on internet and some people say that is sd card problem or its not?
edit: i formated other sd card i have just 4gb but class 6 doing the same process but now it doesnt boot at all, doesnt enter the setup
2nd edit: I installed noobs lite on the 8gb class 4 sd card and it doesnt boot. what is happening? Did i screwed my PI??
ITS WORKING! i waited 1 day and it booted again. I used noobs lite and perform a raspbmc install and its running all fine. Thanks
scjoao said:
ITS WORKING! i waited 1 day and it booted again. I used noobs lite and perform a raspbmc install and its running all fine. Thanks
Click to expand...
Click to collapse
If you have trouble with it booting again a simple fix is to boot noobs, select edit config and at the bottom enter:
boot_delay=1
Fixes it every time. Keep in mind that if you make any config changes you will need to re-add boot_delay=1
Dear community,
About a year after i really wanted to root my htc one mini 2, i decided I wanted to factory reset my phone.
So after this year I forgot everything i knew, and managed to wipe the whole OS...
I would really appreciate any hints that might help me to fix my phone again.
Info on where i'm standing with the problem:
1. I tried to find my stock ROM on this site and couldn't because under "firmware" i can only find 2.18.161.2, though mine is 2.18.166.1 - does this matter? It's the vodafone one, and they even have a nandroid backup for my version, but not the stock firmware.
2. I have TWRP installed, and the site tells me i need to have my bootloader locked to flash stock roms. I have no problem relocking or unlocking it, but in the relocked state, i can not access TWRP recovery and use the sideload feature to flash the rom. The phone always goes back to the bootloader screen and the title says " **security warning** ".
3. i would really like to get my phone back as close to it's stock state as possible.
I am kind of afraid of flashing the available stock firmware, as I don't know how to proceed from there without TWRP.
I read a lot about this topic, but i'm kind of loosing it right now...
Can some kind soul lend me their wisdom and help me out?
Would be much appreciated
mfG Montor
Hi,
You can either get put back everything to stock, as in flash stock recovery, relock the bootloader, get the available version from their site but the version number should be higher than the one already installed, however with S-Off you can flash any version.
Or
Leave everything as it is and perform a Nandroid restore.
What file are you getting from the website, is it RUU file, ROM, is it exe or zip ?, RUU will be beneficial to put back to complete stock with proper conditions met ?
WITH CUSTOM RECOVERY YOU CANNOT FLASH STOCK ROM.
TryllZ said:
Hi,
You can either get put back everything to stock, as in flash stock recovery, relock the bootloader, get the available version from their site but the version number should be higher than the one already installed, however with S-Off you can flash any version.
Or
Leave everything as it is and perform a Nandroid restore.
What file are you getting from the website, is it RUU file, ROM, is it exe or zip ?, RUU will be beneficial to put back to complete stock with proper conditions met ?
WITH CUSTOM RECOVERY YOU CANNOT FLASH STOCK ROM.
Click to expand...
Click to collapse
I would actually really like to put everything back to stock, because the reason for the root is somewhat gone now.
As already mentioned, I sadly can not find the stock recovery that i need.
I need the Vodafone x.xx.166.x format, and the closest i get would be the Vodafone x.xx.161.x format of the stock recovery.
What happens if i try to flash the available one? Do I brick my phone once again, or does it say something like "recovery version not matching device version" ?
Also, if by any chance the flash is successfull and the stock recovery x.xx.161.x is on my phone, how can i flash the stock firmware without TWRP?
Though I really like the idea of a more or less complete stock phone, I could totally go with the nandroid backup too.
The problem is, I already downloaded the files but as my OS is gone and i didn't turn on usb-debugging, i can not move a single file onto my device. (I assume that's the issue, because my adb push file /sdcard/TWRP/Backups didn't quite work...
Edit: Because you asked, I don't actually know what would be the best solution right now, but the only file fitting my device version is the nandroid backup, but there are RUUs for x.xx.161.x - which, as already mentioned, is the closest i can get to x.xx.166.x
Montor said:
I would actually really like to put everything back to stock, because the reason for the root is somewhat gone now.
As already mentioned, I sadly can not find the stock recovery that i need.
I need the Vodafone x.xx.166.x format, and the closest i get would be the Vodafone x.xx.161.x format of the stock recovery.
What happens if i try to flash the available one? Do I brick my phone once again, or does it say something like "recovery version not matching device version" ?
Also, if by any chance the flash is successfull and the stock recovery x.xx.161.x is on my phone, how can i flash the stock firmware without TWRP?
Though I really like the idea of a more or less complete stock phone, I could totally go with the nandroid backup too.
The problem is, I already downloaded the files but as my OS is gone and i didn't turn on usb-debugging, i can not move a single file onto my device. (I assume that's the issue, because my adb push file /sdcard/TWRP/Backups didn't quite work...
Edit: Because you asked, I don't actually know what would be the best solution right now, but the only file fitting my device version is the nandroid backup, but there are RUUs for x.xx.161.x - which, as already mentioned, is the closest i can get to x.xx.166.x
Click to expand...
Click to collapse
Here's how you can do it without developer option enabled.
- Make sure device is 100% charged, if you don't know how much charge exists, leave the device on charge for about 1-2 hours.
- Find an MMC of 4GB (Hoping your MMC slot is working)
- You will need Serial Number of your device for Nandroid restore, you can get it from the device box with IMEI stickers.
For RUU (zip file)
- Download the available RUU and rename it to 0P8BIMG.zip (I'm assuming its the same a normal HTC One Mini 2)
- Copy the file into the root of the MMC
- Insert MMC into device
- Boot up device and enter boot loader
- As the device enters bootloader it will automatically start flashing, if all conditions are met.
NB: I frankly can't remember if this will work with TWRP installed.
For Nandroid restore.
- THIS STEP NEEDS BE DONE FROM A PC, Extract all files from the Nandroid restore zip, connect the MMC to the PC.
- In the root folder of the MMC create a TWRP folder and inside it create a folder named BACKUPS and inside this create a folder named YOUR DEVICE SERIAL NUMBER (I haven't tested it with a different named folder so I don't know) inside this folder create a folder with the OS version number of your device and inside this folder place all extracted files.
- Put the MMC into the device.
- Enter TWRP and choose restore
- Locate the folder created in the earlier step, the TWRP Backup folder with files extracted in it.
- Let TWRP restore.
- As far as my knowledge goes it should work fine.
I will advise that you do a restore from Nandroid, because you have TWRP working this is the easiest method, to get the phone up and running then you can decide to go for RUU by enabling developer options and more.
I'm using a Nnadroid restore more than 6 months now, no problem whatsoever.
Good Luck
TryllZ said:
Here's how you can do it without developer option enabled.
- Make sure device is 100% charged, if you don't know how much charge exists, leave the device on charge for about 1-2 hours.
- Find an MMC of 4GB (Hoping your MMC slot is working)
- You will need Serial Number of your device for Nandroid restore, you can get it from the device box with IMEI stickers.
For Nandroid restore.
- THIS STEP NEEDS BE DONE FROM A PC, Extract all files from the Nandroid restore zip, connect the MMC to the PC.
- In the root folder of the MMC create a TWRP folder and inside it create a folder named BACKUPS and inside this create a folder named YOUR DEVICE SERIAL NUMBER (I haven't tested it with a different named folder so I don't know) inside this folder create a folder with the OS version number of your device and inside this folder place all extracted files.
- Put the MMC into the device.
- Enter TWRP and choose restore
- Locate the folder created in the earlier step, the TWRP Backup folder with files extracted in it.
- Let TWRP restore.
- As far as my knowledge goes it should work fine.
I will advise that you do a restore from Nandroid, because you have TWRP working this is the easiest method, to get the phone up and running then you can decide to go for RUU by enabling developer options and more.
I'm using a Nnadroid restore more than 6 months now, no problem whatsoever.
Good Luck
Click to expand...
Click to collapse
That is exactly where I'm stuck with my nandroid backup.
I just can't seem to find a way to push the folder with all the files onto my sd-card.
I tried with "adb push \myfolder /sdcard/TWRP/Backups/myphonesnumberthingy", but it gives me "Device not found" error.
The device is connected, and with "fastboot devices" it shows in the list.
Did I miss something important here?
All the drivers are installed, and I shouldn't be able to lock and unlock the bootloader if the device wasn't properly connected right?
Edit: Nevermind, it seems I can't read. I will try to put my sd-card out of my phone and connect it to my pc somehow
Montor said:
That is exactly where I'm stuck with my nandroid backup.
I just can't seem to find a way to push the folder with all the files onto my sd-card.
I tried with "adb push \myfolder /sdcard/TWRP/Backups/myphonesnumberthingy", but it gives me "Device not found" error.
The device is connected, and with "fastboot devices" it shows in the list.
Did I miss something important here?
All the drivers are installed, and I shouldn't be able to lock and unlock the bootloader if the device wasn't properly connected right?
Edit: Nevermind, it seems I can't read. I will try to put my sd-card out of my phone and connect it to my pc somehow
Click to expand...
Click to collapse
Use an MMC reader for working your MMC with a PC.
Your device connecting to your PC in the bootloader does not mean your commands will work, ADB works with device switched on, in bootloader its fastboot and NOT ADB.
TryllZ said:
Use an MMC reader for working your MMC with a PC.
Your device connecting to your PC in the bootloader does not mean your commands will work, ADB works with device switched on, in bootloader its fastboot and NOT ADB.
Click to expand...
Click to collapse
So i have an adapter for connecting the MMC to my PC.
I plug it in, and it shows me THIS.
Inside my recovery, if I use the file manager, I can't seem to access/find a single set of directories that looks like the one above...
Montor said:
So i have an adapter for connecting the MMC to my PC.
I plug it in, and it shows me THIS.
Inside my recovery, if I use the file manager, I can't seem to access/find a single set of directories that looks like the one above...
Click to expand...
Click to collapse
Have you extracted files from the Nandroid Backup zip and placed them into TWRP>Backups>Phone Serial Number>OS Version Number folder
Now, in TWRP choose Restore from the main screen, and locate the folder where your files are placed.
When in Restore, make sure you choose Storage: Micro SDCard at the top below Time, Battery and CPU.
TryllZ said:
Have you extracted files from the Nandroid Backup zip and placed them into TWRP>Backups>Phone Serial Number>OS Version Number folder
Now, in TWRP choose Restore from the main screen, and locate the folder where your files are placed.
When in Restore, make sure you choose Storage: Micro SDCard at the top below Time, Battery and CPU.
Click to expand...
Click to collapse
Yes i did extract the files in the zip, and placed them in TWRP/BACKUPS/serial/osversion.
But there is no way to locate it or access it.
When i open the file manager in TWRP, i see directories like "boot, cache, data, dev, devlog" etc, and also sdcard and external_sd.
External_sd is empty, and opening sdcard gives me only the directory created by my own nandroid backup, with the path /sdcard/TWRP/BACKUPS/HT533WR02324/2016-07-17--08-52-32.
Edit: Okay now we are getting closer to solving this.
I tried to change TWRP backup from internal storage to micro sdCard - but it shows (0MB) beside it.
Choosing it either way, does nothing. The checkbox internal storage stays checked.
I'm going to restart my phone and see if something changes...
Edit2: Did nothing, unfortunately.
If i remove the card, the box can't be checked.
If i insert it again and tap on it, it stays highlighted for about 4 seconds and then internal storage is still checked :/
Montor said:
Yes i did extract the files in the zip, and placed them in TWRP/BACKUPS/serial/osversion.
But there is no way to locate it or access it.
When i open the file manager in TWRP, i see directories like "boot, cache, data, dev, devlog" etc, and also sdcard and external_sd.
External_sd is empty, and opening sdcard gives me only the directory created by my own nandroid backup, with the path /sdcard/TWRP/BACKUPS/HT533WR02324/2016-07-17--08-52-32.
Edit: Okay now we are getting closer to solving this.
I tried to change TWRP backup from internal storage to micro sdCard - but it shows (0MB) beside it.
Choosing it either way, does nothing. The checkbox internal storage stays checked.
I'm going to restart my phone and see if something changes...
Edit2: Did nothing, unfortunately.
If i remove the card, the box can't be checked.
If i insert it again and tap on it, it stays highlighted for about 4 seconds and then internal storage is still checked :/
Click to expand...
Click to collapse
Firstly it shouldn't show you 0MB for SDCard, anyway, place the extracted Nandroid files in the /sdcard/TWRP/BACKUPS/HT533WR02324/2016-07-17--08-52-32 folder and then try again, if this folder is accessible then it should work.
MB: YOUR CONSTANT USE OF THE TERM FILE MANAGER IN TWRP IS GIVING ME AN IMPRESSION THAT YOU ARE ACCESSING THE FILE MANAGER IN TWRP WHERE AS YOU HAD TO PRESS THE RESTORE BUTTON FROM THE MAIN SCREEN, THE FILE MANAGER BUTTON IS DIFFERENT ALTOGETHER IN TWRP.
TryllZ said:
Firstly it shouldn't show you 0MB for SDCard, anyway, place the extracted Nandroid files in the /sdcard/TWRP/BACKUPS/HT533WR02324/2016-07-17--08-52-32 folder and then try again, if this folder is accessible then it should work.
MB: YOUR CONSTANT USE OF THE TERM FILE MANAGER IN TWRP IS GIVING ME AN IMPRESSION THAT YOU ARE ACCESSING THE FILE MANAGER IN TWRP WHERE AS YOU HAD TO PRESS THE RESTORE BUTTON FROM THE MAIN SCREEN, THE FILE MANAGER BUTTON IS DIFFERENT ALTOGETHER IN TWRP.
Click to expand...
Click to collapse
Oh it appears I didn't mention this.
The folder i CAN see, is inside the internal storage under "/sdcard/TWRP/BACKUPS/HT533WR02324/2016-07-17--08-52-32" - and I can't access the internal storage, i would have pushed the files if that was possible.
No no, I use the backup function to locate my nandroid backup files.
But with the backup function, I couldn't change directories and look for files so I used the file manager to do that.
The file manager doesn't allow me to change to sd card either way, so that doesn't work.
Edit:
The sd-card i have inside my phone right now is 64gb big - is it possible that this is too big to be recognized?
I also have a 32gb one, would that make a difference?
Montor said:
Oh it appears I didn't mention this.
The folder i CAN see, is inside the internal storage under "/sdcard/TWRP/BACKUPS/HT533WR02324/2016-07-17--08-52-32" - and I can't access the internal storage, i would have pushed the files if that was possible.
No no, I use the backup function to locate my nandroid backup files.
But with the backup function, I couldn't change directories and look for files so I used the file manager to do that.
The file manager doesn't allow me to change to sd card either way, so that doesn't work.
Edit:
The sd-card i have inside my phone right now is 64gb big - is it possible that this is too big to be recognized?
I also have a 32gb one, would that make a difference?
Click to expand...
Click to collapse
As per spec, this device supports 64GB too but I myself use a 32GB one, so yes you can try that and again you will need to access TWRP restore through the RESTORE button in TWRP main screen and NOT BACKUP button.
What you can do is copy the /sdcard/TWRP/BACKUPS/HT533WR02324/2016-07-17--08-52-32 folder into you SDCard TWRP folder and place the extracted files in this folder and try a restore.
TryllZ said:
As per spec, this device supports 64GB too but I myself use a 32GB one, so yes you can try that and again you will need to access TWRP restore through the RESTORE button in TWRP main screen and NOT BACKUP button.
What you can do is copy the /sdcard/TWRP/BACKUPS/HT533WR02324/2016-07-17--08-52-32 folder into you SDCard TWRP folder and place the extracted files in this folder and try a restore.
Click to expand...
Click to collapse
Okay it seems my 32gb one is broken, it's showing up but not as a mass storage.
Well if I could access the sd card with twrp at all, that would really help me - but I can't.
Backup botton and restore button behave the same when choosing the Micro SDcard (0MB).
And with the file manager, accessing the sd card gives me an empty directory...
Edit: Googling this problem tells me I need to format my card, as TWRP doesn't recognize it.
I read FAT32 somewhere, I read exFAT somewhere, what format does TWRP work with?
Montor said:
Okay it seems my 32gb one is broken, it's showing up but not as a mass storage.
Well if I could access the sd card with twrp at all, that would really help me - but I can't.
Backup botton and restore button behave the same when choosing the Micro SDcard (0MB).
And with the file manager, accessing the sd card gives me an empty directory...
Edit: Googling this problem tells me I need to format my card, as TWRP doesn't recognize it.
I read FAT32 somewhere, I read exFAT somewhere, what format does TWRP work with?
Click to expand...
Click to collapse
First can I know if you can see any file/folder in SD when accessing it through Restore in TWRP ?
Format it as exFat, hopefully it should work..
You mentioned its not showing as Mass Storage, what is it showing up as ?
TryllZ said:
First can I know if you can see any file/folder in SD when accessing it through Restore in TWRP ?
Format it as exFat, hopefully it should work..
Click to expand...
Click to collapse
First, through restore I can't navigate to other folders at all.
All I can do there, is tapping on Internal storage and choosing micro SDcard - which doesn't work.
It's like TWRP knows there is a sd card in my phone, but somehow can't access it.
That's why I assume it's due to it's formatting.
Switching folders/directories is only possible with the file manager with the advanced button - but this only shows me two things.
1. External_sd --> shows me an empty directory
2. sdcard --> shows me the folder where TWRP created the backup folder when I did the backup myself. (I assume that's the internal storage because under the restore button, this is the only thing that i shows up)
I read somewhere, that exFAT is only recognized by TWRP if you have a newer version of the recovery installed.
I don't know exactly but the version i'm using is definitely on of the first versions that came out.
Also, I checked my SD-card on my laptop, and apparently it allready is exFAT.
Edit: I was talking about the 32gb card not showing up.
I don't think it really matters, but my description wasn't very accurate.
The SD-card (32gb) is shown as the SD-card like it should, but the PC doesn't show any kind of used/free space bar underneath it.
Also, opening it gives a message like "There is no card connected"
Montor said:
First, through restore I can't navigate to other folders at all.
All I can do there, is tapping on Internal storage and choosing micro SDcard - which doesn't work.
It's like TWRP knows there is a sd card in my phone, but somehow can't access it.
That's why I assume it's due to it's formatting.
Switching folders/directories is only possible with the file manager with the advanced button - but this only shows me two things.
1. External_sd --> shows me an empty directory
2. sdcard --> shows me the folder where TWRP created the backup folder when I did the backup myself. (I assume that's the internal storage because under the restore button, this is the only thing that i shows up)
I read somewhere, that exFAT is only recognized by TWRP if you have a newer version of the recovery installed.
I don't know exactly but the version i'm using is definitely on of the first versions that came out.
Also, I checked my SD-card on my laptop, and apparently it allready is exFAT.
Edit: I was talking about the 32gb card not showing up.
I don't think it really matters, but my description wasn't very accurate.
The SD-card (32gb) is shown as the SD-card like it should, but the PC doesn't show any kind of used/free space bar underneath it.
Also, opening it gives a message like "There is no card connected"
Click to expand...
Click to collapse
The SDCard not showing free space bars is windows could possibly mean SDCard error.
FAT, FAT32 and exFAT work for Android so yes if you format it in any of these it ought to work. exFAT format is most commonly used in mobile devices in terms of SDCard.
Card disconnecting in Windows, I am guessing your card is having I/O issues, what this means is that if you try and format it and the MMC disconnects during the format process there is a chance it will be permanently damaged.
What you can do is just use Quick Format, this will not check for any errors, however if there is any sector errors in the MMC, flasing through TWRP could cause unexpected problems if that sector is accessed.
Advisably get a working 4GB SDcard to avoid any hiccups.
TryllZ said:
The SDCard not showing free space bars is windows could possibly mean SDCard error.
FAT, FAT32 and exFAT work for Android so yes if you format it in any of these it ought to work. exFAT format is most commonly used in mobile devices in terms of SDCard.
Card disconnecting in Windows, I am guessing your card is having I/O issues, what this means is that if you try and format it and the MMC disconnects during the format process there is a chance it will be permanently damaged.
What you can do is just use Quick Format, this will not check for any errors, however if there is any sector errors in the MMC, flasing through TWRP could cause unexpected problems if that sector is accessed.
Advisably get a working 4GB SDcard to avoid any hiccups.
Click to expand...
Click to collapse
I have the 64gb one i was always using, and the not working 32gb one.
Both are exFat.
I just wanted to know if it might work formatting the 64gb one
Edit: Concerning formatting, this is the thread I was referring to.
Montor said:
I have the 64gb one i was always using, and the not working 32gb one.
Both are exFat.
I just wanted to know if it might work formatting the 64gb one
Edit: Concerning formatting, this is the thread I was referring to.
Click to expand...
Click to collapse
The device supports 64GB and so does TWRP, now concerning your SDCard, yes it would work (as long as its hardware-error free)..
I'm using TWRP version 2.8.5.0 and my SDCard is exFAT and works fine with TWRP..could be that older versions of TWRP might not support exFAT but I personally can't confirm that as which is the older version that you are using.
TryllZ said:
The device supports 64GB and so does TWRP, now concerning your SDCard, yes it would work (as long as its hardware-error free)..
I'm using TWRP version 2.8.5.0 and my SDCard is exFAT and works fine with TWRP..could be that older versions of TWRP might not support exFAT but I personally can't confirm that as which is the older version that you are using.
Click to expand...
Click to collapse
Update!
I realized, it's probably really the 64gb sd card, that's the issue here.
I took the 4gb one out of my fathers phone - bam.
TWRP recognized it immediately and restore is in progress!!!
Will keep updating!
Edit: IT F*ING WORKED!
Thank you SO much for your help!!!
Is there any way I can give you somethign in return?
Montor said:
Update!
I realized, it's probably really the 64gb sd card, that's the issue here.
I took the 4gb one out of my fathers phone - bam.
TWRP recognized it immediately and restore is in progress!!!
Will keep updating!
Edit: IT F*ING WORKED!
Thank you SO much for your help!!!
Is there any way I can give you somethign in return?
Click to expand...
Click to collapse
Great...:good::good::good:
Frankly I never imagined it could be the 64GB, I was purely under the assumption TWRP would accept 64GB MMC, anyway I lacked that information but now I know.
Nope, its working now is more than enough for me.