So every post seems to address only 5.3.1. I can't find a SINGLE thing about rooting the 2015 5th gen Fire that runs 5.3.2. Am I the only person not able to find answers? King Root cant unlock, I can't figure out a solution and I can't stand the interface.
Purchased this for my son and he won't even use it. And He's 5. If I can't load CM or another custom rom soon I'm gonna smash it. At least I will feel better afterwards! I HATE that companies do this. Please help!
you can downgrade and then you can root
Ubuntu_noobi said:
So every post seems to address only 5.3.1. I can't find a SINGLE thing about rooting the 2015 5th gen Fire that runs 5.3.2. Am I the only person not able to find answers? King Root cant unlock, I can't figure out a solution and I can't stand the interface.
Purchased this for my son and he won't even use it. And He's 5. If I can't load CM or another custom rom soon I'm gonna smash it. At least I will feel better afterwards! I HATE that companies do this. Please help!
Click to expand...
Click to collapse
Fair bit of info on 5.3.2; sorry you couldn't find it. As for rooting simply roll back to 5.3.1 and then use the SuperTool to root (do not use Kingroot directly). See forum index in General thread for additional detail.
Davey126 said:
Fair bit of info on 5.3.2; sorry you couldn't find it. As for rooting simply roll back to 5.3.1 and then use the SuperTool to root (do not use Kingroot directly). See forum index in General thread for additional detail.
Click to expand...
Click to collapse
I've tried moving the factory update after downloading it to the DCIM, when trying to update, it states that you can't update because it's an older version of the os. Is it required to side load?
Ubuntu_noobi said:
I've tried moving the factory update after downloading it to the DCIM, when trying to update, it states that you can't update because it's an older version of the os.
Click to expand...
Click to collapse
Wrong procedure. See forum index for details, in particular the first two posts in this thread.
Ubuntu_noobi said:
Is it required to side load?
Click to expand...
Click to collapse
Yes.
So glad I found this post. Researching the same thing. Trying it out now
Sent from my iPhone using Tapatalk
yungskeeme01 said:
So glad I found this post. Researching the same thing. Trying it out now
Click to expand...
Click to collapse
Any new info to share? I still haven't been able to figure it out
Ubuntu_noobi said:
Any new info to share? I still haven't been able to figure it out
Click to expand...
Click to collapse
What exactly are you trying to "figure out"? Responded a few days ago with downgrade/rollback links which includes a step-by-step video.
Ubuntu_noobi said:
Any new info to share? I still haven't been able to figure it out
Click to expand...
Click to collapse
I downgraded to 5.3.1. Rooted the fire and am now running CM 12.1. Very smooth!. Took me a awhile to get since I have a Mac but got it working. Used Rootjunky's YouTube video on how to restore. That's how I downgraded. Then used his Supertool for Mac and rooted. I then installed Flashfire and put CM12 on the tablet.
Sent from my iPhone using Tapatalk
Ubuntu_noobi said:
Any new info to share? I still haven't been able to figure it out
Click to expand...
Click to collapse
Davey126 already answered it here.
Davey126 said:
Fair bit of info on 5.3.2; sorry you couldn't find it. As for rooting simply roll back to 5.3.1 and then use the SuperTool to root (do not use Kingroot directly). See forum index in General thread for additional detail.
Click to expand...
Click to collapse
I also bought the Fire a few days ago and I dealt with 5.3.2 by first using "adb sideload" to go to 5.3.1 and then rooting it.
I had problems with rooting via the SuperTool, as it used an old KingRoot version and after several rooting attempts when it finally succeeded, the SuperTool had problems removing KingRoot and replacing it with SuperSu (this error made it lose root somehow). Same problem occurred when I used the SuperTool but with the newest KingRoot, so instead of using the SuperTool I used newest KingRoot directly and decided not to replace it with SuperSu.
All is fine now, lockscreen ads are gone, AdAway is installed and OTA updates blocked.
amerkiller1995 said:
I used KingRoot directly and decided not to replace it with SuperSu.
Click to expand...
Click to collapse
FYI - recognize KingRoot is a shady tool whose authors have uncertain motivations. Even after rooting it continues to send/receive information without apparent reason. One has to question any app that is offered for free and aggressively resists being uninstalled. Given the unknowns I would reconsider the decision to retain KingRoot/KingUser.
amerkiller1995 said:
Davey126 already answered it here.
I also bought the Fire a few days ago and I dealt with 5.3.2 by first using "adb sideload" to go to 5.3.1 and then rooting it.
I had problems with rooting via the SuperTool, as it used an old KingRoot version and after several rooting attempts when it finally succeeded, the SuperTool had problems removing KingRoot and replacing it with SuperSu (this error made it lose root somehow). Same problem occurred when I used the SuperTool but with the newest KingRoot, so instead of using the SuperTool I used newest KingRoot directly and decided not to replace it with SuperSu.
All is fine now, lockscreen ads are gone, AdAway is installed and OTA updates blocked.
Click to expand...
Click to collapse
I had the issue with King Root as well. What I did was download a newer version and replaced in the SuperTool folder
Sent from my iPhone using Tapatalk
Davey126 said:
FYI - recognize KingRoot is a shady tool whose authors have uncertain motivations. Even after rooting it continues to send/receive information without apparent reason. One has to question any app that is offered for free and aggressively resists being uninstalled. Given the unknowns I would reconsider the decision to retain KingRoot/KingUser.
Click to expand...
Click to collapse
Yes, it certainly gives that vibe. However my Fire is just a portable anime player, it's offline and there's nothing on it except anime, so I'll let it be.
BTW KingRoot flagged AdAway as a "risk"
yungskeeme01 said:
I had the issue with King Root as well. What I did was download a newer version and replaced in the SuperTool folder
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I've done that, it's in the post you quoted. Still, in the replacing step, the SuperTool deletes KingRoot, but then fails to put SuperSu in its place, it prints some errors to the console like ERR_WRITE or something.
amerkiller1995 said:
Yes, it certainly gives that vibe. However my Fire is just a portable anime player, it's offline and there's nothing on it except anime, so I'll let it be.
BTW KingRoot flagged AdAway as a "risk"
I've done that, it's in the post you quoted. Still, in the replacing step, the SuperTool deletes KingRoot, but then fails to put SuperSu in its place, it prints some errors to the console like ERR_WRITE or something.
Click to expand...
Click to collapse
Sorry if I misread it. I used the version included and KingRoot so I replaced it in Supertool and re-rooted using SuperTool and it removed it no issues. Whatever though, it got rooted one way or another!
Sent from my iPhone using Tapatalk
Awesome I will try again tonight
Solved!!! Finally!!!
Ubuntu_noobi said:
So every post seems to address only 5.3.1. I can't find a SINGLE thing about rooting the 2015 5th gen Fire that runs 5.3.2. Am I the only person not able to find answers? King Root cant unlock, I can't figure out a solution and I can't stand the interface.
Purchased this for my son and he won't even use it. And He's 5. If I can't load CM or another custom rom soon I'm gonna smash it. At least I will feel better afterwards! I HATE that companies do this. Please help!
Click to expand...
Click to collapse
TL;DR: THERE IS NO "One click" OPTION THAT WORKS. I DOWNLOADED ALL OF THEM. IVE TRIED EVERY DAMN ONE OF THEM. STOP SEARCHING. You MUST side load the system with the code necessary to make it capable to root. Downgrading to 5.3.1 was the secret, instead of trying to root on 5.3.2. I made a glossary of the confusing terminology, made a step by step walk through for noobs
SO, having felt encouraged by the response by people on this forum, last night I decided it was worth another try.
I finally figured out what I was missing. IF YOU CURRENTLY HAVE FIREOS VERSION 5.3.1, YOU MUST ROLL IT BACK THRU SIDE LOADING see here: SIDELOAD TUTORIAL
I tried to load straight onto the system disk and caused all kinds of problems. Once I followed that step by step, which TBH, was a lot of pausing and rewinding. I am not familiar with many terms so I made this...
Android Common Terms:
Boot: A sequence of commands written into the underlying software that tells the device what order to operate in
Bootloader: See Previous (this is the sequence I referenced previously)
Locked Bootloader: Think of trying to edit a PDF you did not create... Exactly.
ADB Fastboot: THIS IS A PROGRAM... NOT A FUNCTION. I still get this confused, thinking that it is a quicker version of the boot sequence... IT IS NOT. ADB Fastboot is a program that gives access to the base software code making it reachable to use certain sections of to "edit the PDF".
Custom Recovery: It is the new version of Windows 10 you were updating to when your crappy laptop you JUST bought came with Windows 8.1. Essentially.
Root: Remember the PDF? Well, if you work somewhere that has Adobe Reader, and you see the window on the right pop up with the ability to login to Adobe Online or whatever? Well, rooting is having login credentials to ACTUALLY edit that damn PDF.
Flash: Download from the internet, and install on your hard drive, or SD Card. It actually means you erase whatever is there completely first, then install. It's two steps, which is why they don't just call it installing... I think.
Partition: Have you ever worked in an office with cubicles? Exactly. A partition is a wall that you put up to segregate files, or programs, or whatever.
SuperTool: Based in your computer. RootJunky Went through and basically made one tool that has everything you need for rooting. PROBLEM IS THAT HE TELLS YOU TO DOWNLOAD ADB FASTBOOT AND DRIVERS AND A BUNCH OF STUFF, then says, or you can just download the SuperTool, which means, I now HAVE TWO OF ALL OF IT, and then I spend the next three hours trying to figure out if its the "custom rom that I sideload into the TWRP, or if the Flashed version of the bootloader gets added to the recovery image, but not before the drivers are flashed into the fastboot."
While this doesn't cover a lot, I hope that people in this community understand what it is like for someone unversed in the lingo to grasp exactly what is going on. I don't think we should speak like idiots and elementary students, but I also think we lose a ton of people that may have something to offer one day because they got frustrated with the terminology and gave up. Luckily, I stuck it out and gave it one last chance and I got it.
So, once I downgraded from 5.3.2 to 5.3.1, I went about trying to root the device, which was also a little confusing.
Step 1: Downgrade if you have 5.3.2 to 5.3.1
Step 2: Enable ADB and Debug in the Settings
Step 3: Hold down the Power and Volume Down button, release the power button once the device starts to reboot and a menu will popup
Step 4: Use the volume keys to access the first selection. This is how you access the "sideloading".
Step 5: Open the SuperTool, click on the batch file which should say Auto... because calling it SuperTool would be confusing
Step 6: follow the super easy instructions. Honestly.
It will walk you through the process and get you to the part about Kingroot and FlashFire and eventually root the device.
I honestly hope this helps someone. God knows it would have saved me from spending approximately 30 hours trying to figure this out.
Related
Hello XDA,
I just purchased a new Acer Iconia One 8 B1-850 and was wondering if I could root it.
I see many posts on B1-810 and similar, but nothing for the B1-850.
CoreyGamingTV said:
Hello XDA,
I just purchased a new Acer Iconia One 8 B1-850 and was wondering if I could root it.
I see many posts on B1-810 and similar, but nothing for the B1-850.
Click to expand...
Click to collapse
same here
i want to root to enable the multi user option by updating the build.prop file, i've been able to connect with ADB but the device isn't visible in windows or mac (tried both) when you reboot into boot loader, in fact it doesn't appear to boot into boot loader it just seems to power off (when using ADB reboot command or choosing boot loader from the recovery menu) so i wonder if its locked out somehow??
Need it too. Did anyone find a way to root B1-850?
Thanks!
dtalas said:
Need it too. Did anyone find a way to root B1-850?
Thanks!
Click to expand...
Click to collapse
I too just purchased a B1-850 tablet, but I've figured out how to root it. Really quite simple. Just use Kingroot:
1.) Navigate to https://kingroot.net/ from your tablet
2.) Download the APK for android
3.) Install said APK (this requires you to have allowed installation from unkown sources in the "Security" panel of the settings menu)
4.) Load up the app and follow its instructions
5.) Reboot and try it out
For good measure, I would also unlock the "Developer Options" panel and allow USB debugging (adb access) and such; I did this before proceeding. You'll have to search for instructions on that yourself, its well documented.
This all worked for me this morning! Really looking forward to unlocking the potential of this cheapy tablet.
Kingroot worked first try, just swap their super user program with supersu. I am having trouble installing the xposed framework though if anyone has any tips.
I was able to root, now I need to install a custom recovery. CWM says this model is not in the supported list. Has anyone been able to install a recovery? I need NANDROID backup functionality.
I made a thread walking you through how to do it on this tablet in the guides area but just use flash fire for recovery and xposed install
Did the B1-850 hardware updated in anyway? I was able to root it in June 2016, but after a screen repair and factory reset and fresh rom from acer, king root and all others can't work. I'm stuck without any root options. Any idea?
Same here
Dylfaus said:
Did the B1-850 hardware updated in anyway? I was able to root it in June 2016, but after a screen repair and factory reset and fresh rom from acer, king root and all others can't work. I'm stuck without any root options. Any idea?
Click to expand...
Click to collapse
There was recently new firmware released for this tablet (08/24/16, Build #: AV0L0.RV09RC04.WW.GEN1), and a handful of updates (08/25/16, 08/26/16) from Acer. I have this same tablet, and I'm unable to root after flashing to the firmware released on the 24th, and latest firmware (Build #: AV0L0.RV0BRC02.WW.GEN1) as well. Hopefully someone can find a fix, as the few different methods I've attempted simply will not work with the latest firmware from Acer.
On KingRoot Please click submit search if enough people do they will find a root until then just hold tight.
jared407 said:
On KingRoot Please click submit search if enough people do they will find a root until then just hold tight.
Click to expand...
Click to collapse
I have done this a bunch, sadly still no love. It's annoying me not being able to root a relatively cheaper tablet, as these tend to get rooted first since they get in more people's hands faster. Oh well, just have to have patience.
Thanks, I was having problems, two different rooters failed and I wondered if it was the recent software update! The image version on my B1-850 is the same as you have quoted! Please post if you find a solution, some apps that need deleting are annoying.
---------- Post added at 06:23 PM ---------- Previous post was at 06:13 PM ----------
random4t4x14 said:
There was recently new firmware released for this tablet (08/24/16, Build #: AV0L0.RV09RC04.WW.GEN1), and a handful of updates (08/25/16, 08/26/16) from Acer. I have this same tablet, and I'm unable to root after flashing to the firmware released on the 24th, and latest firmware (Build #: AV0L0.RV0BRC02.WW.GEN1) as well. Hopefully someone can find a fix, as the few different methods I've attempted simply will not work with the latest firmware from Acer.
Click to expand...
Click to collapse
I was having a problem rooting my device and wondered if it was the recent software update, and my image version is as you have quoted! I f you manage to root your device please post!
knockout350 said:
I made a thread walking you through how to do it on this tablet in the guides area but just use flash fire for recovery and xposed install
Click to expand...
Click to collapse
Which recovery do you install with flash fire; I don't see a link to it in your other thread?
Success!
The latest release of KingRoot is able to root the latest firmware for this tablet. I saw there was a new release of KingRoot back on the 23rd, and it's working as it should. I grabbed the working version here -> http://forum.xda-developers.com/devdb/project/dl/?id=21707
hi guys. any idea how to recover b1-850 from bootloop?
I no its a little late but i rooted mine with the kingoroot one click root apk. Ive installed xposed framework and customized like crazy everything from fonts to boot animation. Cant find a custom recovery tho.
I cannot root it with any of the tools I have tried (Kingo ROOT, KingRoot, etc). Anyone know any method that works?
Acer B1-850. Is this device even rootable?
This device has made an idiot of me. If I can be of any assistance finding a root exploit for this device let me know. I will gladly write a detailed procedure of the process. I made the mistake of assuming since it was an entry level, inexpensive device, the path to root would be simple. Three months later none of the common "one-click" programs has found an exploit. I have a copy of stock rom for recovery so testing is not a problem for me. It's a matter of pride at this point. So much so I found one on sale for $60 and bought it just for this purpose. I have followed every link I can find associated with this device to a dead end. Any help will be appreciated.
pdnorman said:
This device has made an idiot of me. If I can be of any assistance finding a root exploit for this device let me know. I will gladly write a detailed procedure of the process. I made the mistake of assuming since it was an entry level, inexpensive device, the path to root would be simple. Three months later none of the common "one-click" programs has found an exploit. I have a copy of stock rom for recovery so testing is not a problem for me. It's a matter of pride at this point. So much so I found one on sale for $60 and bought it just for this purpose. I have followed every link I can find associated with this device to a dead end. Any help will be appreciated.
Click to expand...
Click to collapse
Same here, still no root for me. Usually these cheapo tablets are not as locked down.
Still waiting!?
I have given up getting assistance from xda on this device. Its as political here as anywhere else. I don't drive a Samsung so nobody wants to help with root. I've heard every excuse from locked bootloader (unlockable in dev options) to what one dev actually told me,"There's little interest in spending energy on an inexpensive device." I understand, but why misrepresent the site by implying all android devices are treated the same? Hell on the Iconia One 8 thread, it says that the B1-850 does not have a MTK SoC, but instead has an Intel Atom chip. Then they send you to another thread where, of course, there is no B1-850 listed! That's because it uses a MTK8163 SoC. In both tablets.
Ok, so this device came with 5.1.1 and when I plugged it in to let it charge up (even in airplane mode) it had already gotten a hold of 5.1.2.1. So yeah, it installed 5.1.2.1 and after much aggravation and research, I realized I was able to downgrade to 5.1.2 I used the files from here: http://forum.xda-developers.com/showpost.php?p=62986665&postcount=3 to get the 5.1.2 binary file.
It did downgrade successfully to 5.1.2 because now it's telling me "Your device is running Fire OS 5.1.2, Fire OS 5.1.2 (542169020) is ready to install."
Anyway, I've installed the latest official version of Kingroot (4.92 from June 3rd-2016) and it's a no-go.
It will get to between 16%-18% and then reboot itself. Then it will get to about 19% and then Kingroot will crash.
I've tried all the tricks, unplugged my USB, rebooted a million times, installed Kingroot several times, factory reset/cache clear, tried the PC version of Kingroot, removed Kingroot from "Recents" between reboots/crashes and I end up with the same. ZERO results.
If anyone has any insight into anything I may have missed or any other ideas, I would very much appreciate it.
Thank you
tucstwo said:
Ok, so this device came with 5.1.1 and when I plugged it in to let it charge up (even in airplane mode) it had already gotten a hold of 5.1.2.1. So yeah, it installed 5.1.2.1 and after much aggravation and research, I realized I was able to downgrade to 5.1.2 I used the files from here: http://forum.xda-developers.com/showpost.php?p=62986665&postcount=3 to get the 5.1.2 binary file.
It did downgrade successfully to 5.1.2 because now it's telling me "Your device is running Fire OS 5.1.2, Fire OS 5.1.2 (542169020) is ready to install."
Anyway, I've installed the latest official version of Kingroot (4.92 from June 3rd-2016) and it's a no-go.
It will get to between 16%-18% and then reboot itself. Then it will get to about 19% and then Kingroot will crash.
I've tried all the tricks, unplugged my USB, rebooted a million times, installed Kingroot several times, factory reset/cache clear, tried the PC version of Kingroot, removed Kingroot from "Recents" between reboots/crashes and I end up with the same. ZERO results.
If anyone has any insight into anything I may have missed or any other ideas, I would very much appreciate it.
Thank you
Click to expand...
Click to collapse
- sideload 5.1.2 again
- on reboot do not register device with Amazon
- try rooting (kingroot)
Davey126 said:
- sideload 5.1.2 again
- on reboot do not register device with Amazon
- try rooting (kingroot)
Click to expand...
Click to collapse
Ill give this a shot. Thanks!
Davey126 said:
- sideload 5.1.2 again
- on reboot do not register device with Amazon
- try rooting (kingroot)
Click to expand...
Click to collapse
You, my friend... Are. The. Man! Thank you. It did hiccup on the first try but the second one was successful and I was able to switch over to SuperSu and all is well. Thank you!
What a dumb thing to cause such an issue. I would have pulled all my hair out before trying this. Thanks again!
tucstwo said:
You, my friend... Are. The. Man! Thank you. It did hiccup on the first try but the second one was successful and I was able to switch over to SuperSu and all is well. Thank you!
What a dumb thing to cause such an issue. I would have pulled all my hair out before trying this. Thanks again!
Click to expand...
Click to collapse
Glad it worked out! If you intend to flash a custom rom (CM12, Nexus, etc.) be sure to grab the latest version of FlashFire from here (guidance/tips here). Some earlier versions were a bit shaky on this device.
Davey126 said:
Glad it worked out! If you intend to flash a custom rom (CM12, Nexus, etc.) be sure to grab the latest version of FlashFire from here (guidance/tips here). Some earlier versions were a bit shaky on this device.
Click to expand...
Click to collapse
Yeah, I'm aware of all of those things. These were actually 4 separate tablets (3 for my daughters and one for my mother) and I just wanted to remove the lock screen ads and prevent future OTAs (all of which require root) plus plop on the Play Store.
I don't think any of them care about flashing ROMs, but I hate when a system takes control over my device and prevents me doing what I want to do with it.
Again, thanks for that most obscure of solutions (on top of the other obscure prerequisites)!
Davey126 said:
- sideload 5.1.2 again
- on reboot do not register device with Amazon
- try rooting (kingroot)
Click to expand...
Click to collapse
I am having the same issue as OP. I have tried not registering with Amazon and it still isn't working for me. I am definitely on 5.1.2 and not 5.1.2.1. I have 3 of these tablets and this is the only one that I haven't been able to get it to work on. The others only took 1 or 2 tries. Anything else I could try?
Edit: Right after posting this it finally worked. If anyone else finds this thread with the same issue, I would say just keep trying. It took me probably 15-20 attempts but it eventually just worked.
Also I had trouble using the kingroot app on the tablet. If you go to the website and dl it to the pc and use kr it works every time
Sent from my SM-N910T3 using XDA-Developers mobile app
Hi all
I've just bought a Fire Tablet on Amazon day with the intention of rooting it and installing CM, but I am a newbie and there's so much information on here it's kind of overwhelming, and most of it has a lot of "if this, then that, or if you want to use that, do this" type guides, which for someones who doesn't really know what all the different methods and options are is really confusing!
So can someone please tell me the step by step process for doing it?
From what I've read I think I have to downgrade to 5.1.2 of the OS as I can't root on 5.1.4? Is that correct?
So do I have to root before I do that? Or do I downgrade first and then root, and then install the CM?
If someone can list each of the steps I need to take to get it from a fresh new 5th Gen Fire 7 to having all the Amazon rubbish off and having it running CM, then I can look for the guides for each step!
Thanks, I hope that makes sense!
:angel:
PS: I've already bricked one by trying to downgrade to 5.1.1 because that wasn't apparent until it was too late, replacement on its way!
Yeah, I read the same thing and I bought it on Prime day. When's the 5.14 tool going to come out? I know, beggars... I really think it's silly to have to downgrade and risk bricking it when normal root for those OS versions don't have such a concern.
Bob Boblaw said:
Hi all
I've just bought a Fire Tablet on Amazon day with the intention of rooting it and installing CM, but I am a newbie and there's so much information on here it's kind of overwhelming, and most of it has a lot of "if this, then that, or if you want to use that, do this" type guides, which for someones who doesn't really know what all the different methods and options are is really confusing!
So can someone please tell me the step by step process for doing it?
From what I've read I think I have to downgrade to 5.1.2 of the OS as I can't root on 5.1.4? Is that correct?
So do I have to root before I do that? Or do I downgrade first and then root, and then install the CM?
If someone can list each of the steps I need to take to get it from a fresh new 5th Gen Fire 7 to having all the Amazon rubbish off and having it running CM, then I can look for the guides for each step!
Thanks, I hope that makes sense!
:angel:
PS: I've already bricked one by trying to downgrade to 5.1.1 because that wasn't apparent until it was too late, replacement on its way!
Click to expand...
Click to collapse
I did the same thing, bought the tablet on prime day and was successfully able to root it and put the AOSP nexus rom
First things first make sure you have the 7-inch tablet for the following steps because apparently it only works with that specific model. Since this is my first post I can't post any links so sorry about that however, I have added the video title so that you can just google it and find the video.
Anything above fire os 5.1.2 ( that is 5.1.4, 5.1.3, 5.1.2.1) has to be downgraded to 5.1.2.
Also downgrading from 5.1.4 to 5.1.1 is going to give you a hard brick. I don't know how you didn't know that but it was clearly stated in the xda guide I was following
Basically you have to follow rootjunkys video and instead of using the file he uses in the video use the fire OS 5.1.2 file which is also available on his website.
Imortant: Do a factory reset before downgrading. I did not do that and the rooting process did not work.
Video title: How to Firmware Restore or Unbrick your Amazon Fire 5th gen Tablet
After you have fire OS 5.1.2 follow the rooting process shown in another rootjunky video
Video title: How to root the Amazon Fire 5th gen 7in on Fire OS 5 1 2 SuperTool Mac linux and Windows
Note: He shows how to do the whole process while using mac but it can be done on windows awell and the windows files are already present. Instead of using the .sh file and opening the terminal double click the .bat file and follow along.
You can use his SuperTool to put the play store app and fire flash app.
Note: For some reason fire flash was not working properly for me by using the SuperTool, so I just installed it from the google play store.
Now you should have rooted fire OS 5.1.2 along with superSU. Now with the fire flash app and you can download any rom that you want to flash. Follow the steps in the video for instructions
Video title: Amazon Fire 5th gen AOSP Nexus rom install with Flash Fire app
Hope this helps.
All credit to rootjunky
erikthebikeman said:
Yeah, I read the same thing and I bought it on Prime day. When's the 5.14 tool going to come out? I know, beggars... I really think it's silly to have to downgrade and risk bricking it when normal root for those OS versions don't have such a concern.
Click to expand...
Click to collapse
It's not a matter of someone getting off their keister and whipping up a "tool" (presumably you are talking about root) that works with FireOS 5.1.4 or whatever the latest version is. Like many manufactures Amazon actively discourages rooting devices and attempt to block known exploits. It's a cat and mouse game. We may see a "tool" soon, much further down the road or never. Be happy you can root the device at all and be thankful for the individuals who unselfishly share their time and talents with the community.
Thanks nefarian.
The problem was that the guide I was referred to for getting CM onto it already assumed it had been rooted, and when I started googling and looking on the different guides on rootjunky there were so many coming from different angles but nothing giving the clear start to end steps for what I wanted to do, for a newbie it was very confusing. Plus in the guide I was following (a rootjunky one) he had an older version of the OS and the toolkit had different files/folders to what are in it now, so I guess at that time there was no mentioned of 5.1.4 and not being able to go back.
After thinking I needed to downgrade the OS I found the one for unbrinking and downgrading and did that fine to 5.1.2, but then when I tried the superkit it still said it was too new, so I tried to downgrade further, which is when I bricked it.
There was no mention of it on the video..... other than a bloody great overlay in the corner, which must have been added later on, and probably because I was tearing my hair out and getting confused I didn't spot it. That's my excuse anyway!
Thanks for your help, I'll have a go with the new one on Monday. So instead of trying to find an all in one guide, I need to find guide for the steps in this order;
1 - do a factory reset on the device (from the device settings, or do I need to do it in the bootloader settings?)
2 -downgrade to 5.1.2 (I should be able to do this now)
3 - root the device (and install supersu?)
4 - install CM
Then it should have full CM and none of the Amazon OS left.
I'm not missing any steps there am I?
Thanks again!
Bob Boblaw said:
Thanks nefarian.
The problem was that the guide I was referred to for getting CM onto it already assumed it had been rooted, and when I started googling and looking on the different guides on rootjunky there were so many coming from different angles but nothing giving the clear start to end steps for what I wanted to do, for a newbie it was very confusing. Plus in the guide I was following (a rootjunky one) he had an older version of the OS and the toolkit had different files/folders to what are in it now, so I guess at that time there was no mentioned of 5.1.4 and not being able to go back.
After thinking I needed to downgrade the OS I found the one for unbrinking and downgrading and did that fine to 5.1.2, but then when I tried the superkit it still said it was too new, so I tried to downgrade further, which is when I bricked it.
There was no mention of it on the video..... other than a bloody great overlay in the corner, which must have been added later on, and probably because I was tearing my hair out and getting confused I didn't spot it. That's my excuse anyway!
Thanks for your help, I'll have a go with the new one on Monday. So instead of trying to find an all in one guide, I need to find guide for the steps in this order;
1 - do a factory reset on the device (from the device settings, or do I need to do it in the bootloader settings?)
2 -downgrade to 5.1.2 (I should be able to do this now)
3 - root the device (and install supersu?)
4 - install CM
Then it should have full CM and none of the Amazon OS left.
I'm not missing any steps there am I?
Thanks again!
Click to expand...
Click to collapse
- no need for a factory reset at any point; offers no benefit for what you are trying to accomplish.
- installation of SuperSU (replacing Kinguser and related Kingroot cruft) after rooting is highly recommended prior to using FlashFire or any other tool that messes with the system partition. The SuperTool can facilitate this otherwise ugly task.
- if you are struggling with RootJunky videos you should give serious consideration to the challenges of installing a custom rom. It doesn't get any easier going forward.
Thanks. I managed to root my Nvidia Shield TV fine so I should be able to do it, I just needed to be clear of the full process from start to finish, and as I wasn't starting from the beginning of the process that made it more confusing. The rootjunky videos are great, but when someone is saying you can use this or that or do this or that it's putting choices and variables in to the mix so it's not a straighforward step by step, and when the kits and the webpages shown on the videos have changed since they were made, for someone trying to piece the info together it takes a bit more time.
Maybe I should point out that I didn't look on here initially when I started trying to do it, I basically saw the fire on offer mentioned on a forum I use and someone said yeah, it's easy to root and get CM on if, just user this video, with the link to a rootjunky YouTube video which didn't mention the prerequisite of already having downgraded the OS (why would it) so in hindsight I didn't start at the right place or have the best information.
After reading through some stuff on here (and that's over whelming for a first timer as there is so much stuff on here for many, many devices and platforms - even just finding the Amazon fire sub forum on an iPad wasn't easy!) I'm getting a better idea for attempt two.
I'll get there, and at least I know how to not brick it now! :good:
OK, so making progress. I have downgraded the new one fine, it now has 5.1.2 of the Fire OS.
I've used rootjunkys supertool to root the device with Kingmaker, which then installed SuperSU, and I finally uninstalled Kingmaker/Purity.
So I now have a rooted Fire, which is great. I have also installed the Google Play store, disabled OTA updates and removed ads from the lock screen. But I don't want the Amazon OS on it (pretty fugly isn't it!), so the next step, flashing it with CM.
What guide would be best for a Fire with 5.1.2 on it? When I look at the Rootjunkys guide for installing CM on the Fire (https://www.youtube.com/watch?v=4dwguHoxTvo&feature=youtu.be) the super tool kit does differ, and the one I downloaded from his link only has the tool for doing it for OS 5.0.1, so it won't let me boot into TWRP recovery. What would be the best tools/guide/method to use for installing CM onto a Fire with 5.1.2?
Thanks
Bob Boblaw said:
OK, so making progress. I have downgraded the new one fine, it now has 5.1.2 of the Fire OS.
I've used rootjunkys supertool to root the device with Kingmaker, which then installed SuperSU, and I finally uninstalled Kingmaker/Purity.
So I now have a rooted Fire, which is great. I have also installed the Google Play store, disabled OTA updates and removed ads from the lock screen. But I don't want the Amazon OS on it (pretty fugly isn't it!), so the next step, flashing it with CM.
What guide would be best for a Fire with 5.1.2 on it? When I look at the Rootjunkys guide for installing CM on the Fire (
&feature=youtu.be) the super tool kit does differ, and the one I downloaded from his link only has the tool for doing it for OS 5.0.1, so it won't let me boot into TWRP recovery. What would be the best tools/guide/method to use for installing CM onto a Fire with 5.1.2?
Thanks
Click to expand...
Click to collapse
- Kingroot/Purify, not Kingmaker/Purity
- I can't think of a better suite of guides than the videos produced by RootJunky
- use FlashFire 0.51 to install (flash) the rom of your choice
- OP for Nexus rom has video link and and basic FlashFire guidance
- get over the minor variations in the language/tools used to support this device between the making of videos and the latest release.
Bob Boblaw said:
OK, so making progress. I have downgraded the new one fine, it now has 5.1.2 of the Fire OS.
I've used rootjunkys supertool to root the device with Kingmaker, which then installed SuperSU, and I finally uninstalled Kingmaker/Purity.
So I now have a rooted Fire, which is great. I have also installed the Google Play store, disabled OTA updates and removed ads from the lock screen. But I don't want the Amazon OS on it (pretty fugly isn't it!), so the next step, flashing it with CM.
What guide would be best for a Fire with 5.1.2 on it? When I look at the Rootjunkys guide for installing CM on the Fire (https://www.youtube.com/watch?v=4dwguHoxTvo&feature=youtu.be) the super tool kit does differ, and the one I downloaded from his link only has the tool for doing it for OS 5.0.1, so it won't let me boot into TWRP recovery. What would be the best tools/guide/method to use for installing CM onto a Fire with 5.1.2?
Thanks
Click to expand...
Click to collapse
1. Get the CM rom and put it in the tablet from here: http://forum.xda-developers.com/amazon-fire/orig-development/rom-cm-12-1-2015-11-15-t3249416
2. Install FlashFire 0.51 from play store or use the SuperTool
3. Follow the video instructions and instead of the nexus rom use the CM rom you downloaded:
Thanks guys. All going well. CM12 is now installed using that Nexus guide. However, because he used Nexus the Play store was installed by default, which CM12 doesn't have.
Looking here - https://wiki.cyanogenmod.org/w/Google_Apps#Installation - I need to download Google Apps and install it, but which package for the Fire 7 5th gen? There are a number of variants to choose from. Looks like using twrp it would have been a pico one, but as it's a new OS a different one is needed?
So it's ARM device, Android 5.1 and Nano variant?
That gives me a zip file, but I can't work out how to install it. The videos I've found all have it as being installed as part of the OS installation via twrp. Should I have installed gapps when I installed the CM12.1 OS, or can I still install it later?
When I go into the boot menu the only install option is to apply update from ADB, wipe data/factory reset, wipe cache partition, reboot to bootloader or power down/reboot.
I tried to use apply update from ADB and did "adb sideload gapps-filename.zip" but it failed to complete the install and went back to the boot menu.
What do I need to do to get Play Store on there?
Thanks again
Bob Boblaw said:
Thanks guys. All going well. CM12 is now installed using that Nexus guide. However, because he used Nexus the Play store was installed by default, which CM12 doesn't have.
Looking here - https://wiki.cyanogenmod.org/w/Google_Apps#Installation - I need to download Google Apps and install it, but which package for the Fire 7 5th gen? There are a number of variants to choose from. Looks like using twrp it would have been a pico one, but as it's a new OS a different one is needed?
So it's ARM device, Android 5.1 and Nano variant?
That gives me a zip file, but I can't work out how to install it. The videos I've found all have it as being installed as part of the OS installation via twrp. Should I have installed gapps when I installed the CM12.1 OS, or can I still install it later?
When I go into the boot menu the only install option is to apply update from ADB, wipe data/factory reset, wipe cache partition, reboot to bootloader or power down/reboot.
I tried to use apply update from ADB and did "adb sideload gapps-filename.zip" but it failed to complete the install and went back to the boot menu.
What do I need to do to get Play Store on there?
Thanks again
Click to expand...
Click to collapse
Reinstall FlashFire 0.51 (here) on CM 12.1 then use it to flash the GAapps package. Agree with your selection: ARM/5.1/nano.
Ah, great, thank you, yep, that's got it on there.
Excellent! All modded and running very quickly! Thanks for the help guys, I appreciate the patience.
Not much space on these Fire's is there, it's already telling me it's low on space and I've only installed MediaMonkey!
Two more quick questions and I'll leave you alone....!
Is it possible to have the SD card to be used as combined storage? For example, my Shield TV lets me 'add' the SD card to the main storage so it sees it all as one instead of a second removable device, so can install apps on it, etc. If this possible with Cyanogenmod? (Not sure what you'd call that feature to search for it!) Thankfully the main reason I bought it was to help manage my music with MediaMonkey so I won't be installing lots on it, but if it is possible it would be useful.
Second, with regard to OS updates on CM, are they automated or do they need to be done manually (and, if so, with care?)
Thanks again!
Bob Boblaw said:
Two more quick questions and I'll leave you alone....!
Is it possible to have the SD card to be used as combined storage?
Second, with regard to OS updates on CM, are they automated or do they need to be done manually ...
Click to expand...
Click to collapse
Short answer: 'yes'. There are various approaches to utilizing SD cards for app installation/storage each with pros, cons and compromises. I highly recommend using a tool that leverages 'symbolic links' which is by far the most reliable method. An example is Link2SD which you can find in the Play Store.
All custom roms for this device are updated manually via FlaahFire or TWRP (if available). Instructions can usually be found in the OP.
@Bob Boblaw
did you open up the file manager and install the flashfire.apk? I am on the same problem you had on your post #11, but my problem I ran into now is flash fire says "root access could not be acquired" otherwise this would be a easy to do.
I think I might have to reinstall everything and start over. >_<
Yes, I copied it over via USB and installed it from the file manager. Do you have root enabled in the developer settings, I enabled it for adb and apps.
Bob Boblaw said:
Yes, I copied it over via USB and installed it from the file manager. Do you have root enabled in the developer settings, I enabled it for adb and apps.
Click to expand...
Click to collapse
Yes! Thank you, that is what I had missed plus I didn't reboot my device so took like 15mins trying to figure out why it wasn't still working.
Glad you got it working ! :good:
Great post guys!! I am getting ready to root my fire OS 5.1.4 and this helps me greatly! Been searching for a downgrade guide and this is it! Have one question is Cm only recovery program or is there a TWRP version for this ? I would think that lastest TWRP would work since its all android but have to ask .I like TWRP myself cause i have it on rooted tablets
thunderman98 said:
Great post guys!! I am getting ready to root my fire OS 5.1.4 and this helps me greatly! Been searching for a downgrade guide and this is it! Have one question is Cm only recovery program or is there a TWRP version for this ? I would think that lastest TWRP would work since its all android but have to ask .I like TWRP myself cause i have it on rooted tablets
Click to expand...
Click to collapse
You can not boot/install/use twrp on this device unless running FireOS 5.0.1 or lower. Nor can you rollback to any version below 5.1.2 without bricking the device. FlashFire is the tool of choice for installing roms and performing other maintenance tasks that are typically done in a custom recovery environment.
Quick backstory; I rooted my 5th Gen 7" Fire a loooong time ago, with I believe a version of Rootjunky's supertool. Removed auto OS updates, all that good stuff. Accordingly, I cannot access the OS info via System Updates (tapping it gives a blank screen for a moment, then goes back to the main settings screen). I have Google Play & services installed.
So, I tried today to use the Amazon Appstore, and I'm getting a "Network Unreachable" error right when the app launches. I can't use any functions of the store. I'm thinking it's maybe because the app is such a relatively old version, Amazon's network is giving it grief, but I don't know for certain.
Like I said, I can't see for sure what OS version I have, but it has to be one of the first iterations of 5.something.
If anyone has run into this, or has any suggestions to get the appstore working again, I'm all ears. I did a factory reset, both from in the OS and from the Amazon recovery (complete with wiping cache), with no luck. Thanks in advance for any help.
scooter1979 said:
Quick backstory; I rooted my 5th Gen 7" Fire a loooong time ago, with I believe a version of Rootjunky's supertool. Removed auto OS updates, all that good stuff. Accordingly, I cannot access the OS info via System Updates (tapping it gives a blank screen for a moment, then goes back to the main settings screen). I have Google Play & services installed.
So, I tried today to use the Amazon Appstore, and I'm getting a "Network Unreachable" error right when the app launches. I can't use any functions of the store. I'm thinking it's maybe because the app is such a relatively old version, Amazon's network is giving it grief, but I don't know for certain.
Like I said, I can't see for sure what OS version I have, but it has to be one of the first iterations of 5.something.
If anyone has run into this, or has any suggestions to get the appstore working again, I'm all ears. I did a factory reset, both from in the OS and from the Amazon recovery (complete with wiping cache), with no luck. Thanks in advance for any help.
Click to expand...
Click to collapse
Have you checked the clock? Sometimes, if the time is off, my store will break. Other than that, I'd recommend you download EZ File explorer, google form the most up to date amazon store apk, uninstall yours and give it a fresh install, especially if you feel out of date is the problem.
I'd also recommend you download a custom rom and flashfire and see if you can't fix that OS info problem, especially since you've already wiped all your data anyway.
elementalcobalt said:
Have you checked the clock? Sometimes, if the time is off, my store will break. Other than that, I'd recommend you download EZ File explorer, google form the most up to date amazon store apk, uninstall yours and give it a fresh install, especially if you feel out of date is the problem.
I'd also recommend you download a custom rom and flashfire and see if you can't fix that OS info problem, especially since you've already wiped all your data anyway.
Click to expand...
Click to collapse
This won't work:
- the version of Amazon's app store is different on FireOS; I don't believe it's available for download
- I did not see the OP had wiped his data; the OS info problem is related to blocking OTA updates
---------- Post added 02-12-2017 at 12:12 AM ---------- Previous post was 02-11-2017 at 11:56 PM ----------
scooter1979 said:
Quick backstory; I rooted my 5th Gen 7" Fire a loooong time ago, with I believe a version of Rootjunky's supertool. Removed auto OS updates, all that good stuff. Accordingly, I cannot access the OS info via System Updates (tapping it gives a blank screen for a moment, then goes back to the main settings screen). I have Google Play & services installed.
So, I tried today to use the Amazon Appstore, and I'm getting a "Network Unreachable" error right when the app launches. I can't use any functions of the store. I'm thinking it's maybe because the app is such a relatively old version, Amazon's network is giving it grief, but I don't know for certain.
Like I said, I can't see for sure what OS version I have, but it has to be one of the first iterations of 5.something.
If anyone has run into this, or has any suggestions to get the appstore working again, I'm all ears. I did a factory reset, both from in the OS and from the Amazon recovery (complete with wiping cache), with no luck. Thanks in advance for any help.
Click to expand...
Click to collapse
Best solution is to install a custom ROM; however you seem satisfied with FireOS.
Next best solution IMO is to reload FireOS (which includes Amazon's app store) but you will probably want to stick with version 5.0.1 if that's what is currently installed. Obvious problem is you can't determine that through normal means. Have to be careful here; if you attempt to reload 5.0.1 and your device is currently on 5.1.x or above it will brick. You would also need to reroot, reblock OTA updates, etc. In short, everything you did before. With no guarantee it will fix your original problem (although I think it will).
One way to test for 5.0.1 is to see if it will boot TWRP. However, that can be messy if you are unfamiliar with fastboot and/or have never established a connection with the device in question.
@steve8x8 - I seem to recall you wrote a tool that can query current component/system levels. Thoughts?
p.s. You could also go with FireOS 5.3.1 which is the last build that can be rooted at present. No brick risk as 5.3.1 is >= the current version of FireOS on the device.
elementalcobalt said:
Have you checked the clock? Sometimes, if the time is off, my store will break. Other than that, I'd recommend you download EZ File explorer, google form the most up to date amazon store apk, uninstall yours and give it a fresh install, especially if you feel out of date is the problem.
I'd also recommend you download a custom rom and flashfire and see if you can't fix that OS info problem, especially since you've already wiped all your data anyway.
Click to expand...
Click to collapse
It's not the clock, that's as it should be.
Davey126 said:
This won't work:
- the version of Amazon's app store is different on FireOS; I don't believe it's available for download
- I did not see the OP had wiped his data; the OS info problem is related to blocking OTA updates
---------- Post added 02-12-2017 at 12:12 AM ---------- Previous post was 02-11-2017 at 11:56 PM ----------
Best solution is to install a custom ROM; however you seem satisfied with FireOS.
Next best solution IMO is to reload FireOS (which includes Amazon's app store) but you will probably want to stick with version 5.0.1 if that's what is currently installed. Obvious problem is you can't determine that through normal means. Have to be careful here; if you attempt to reload 5.0.1 and your device is currently on 5.1.x or above it will brick. You would also need to reroot, reblock OTA updates, etc. In short, everything you did before. With no guarantee it will fix your original problem (although I think it will).
One way to test for 5.0.1 is to see if it will boot TWRP. However, that can be messy if you are unfamiliar with fastboot and/or have never established a connection with the device in question.
@steve8x8 - I seem to recall you wrote a tool that can query current component/system levels. Thoughts?
p.s. You could also go with FireOS 5.3.1 which is the last build that can be rooted at present. No brick risk as 5.3.1 is >= the current version of FireOS on the device.
Click to expand...
Click to collapse
You are correct, I am happy with the FireOS.
I've played in fastboot before, and given EXACT instructions, I can regurgitate results, but it's not my native tongue. I don't know if the appstore version is locked to the OS version, but according to Appstore Settings under the manage Amazon apps section, I'm rocking release-9.1011.5.1.39.0_2000145010, last updated 2/12/15. Any way to link that with OS version?
If no more info can be gleaned from my device, either from the appstore version or something steve8x8 may have, I may just load 5.3.1 on and run from there. Kinda rather not, but I'd kinda rather not not have appstore access.
scooter1979 said:
... I've played in fastboot before, and given EXACT instructions, I can regurgitate results, but it's not my native tongue. I don't know if the appstore version is locked to the OS version, but according to Appstore Settings under the manage Amazon apps section, I'm rocking release-9.1011.5.1.39.0_2000145010, last updated 2/12/15. Any way to link that with OS version?
If no more info can be gleaned from my device, either from the appstore version or something steve8x8 may have, I may just load 5.3.1 on and run from there. Kinda rather not, but I'd kinda rather not not have appstore access.
Click to expand...
Click to collapse
To my knowledge there is no direct correlation of appstore version to FireOS version. Obviously there's a range but we'd need a 1-1 match to draw a comfortable conclusion.
You can test TWRP bootability by following the guidance in this post. If TWRP boots you can safely sideload FireOS 5.0.1 from here using instructions in this thread (posts #1 and #2). That said, if you have no intention of every installing a custom ROM there really isn't any advantage to retaining an older bootloader. If that's the case might as well sideload FireOS 5.3.1. Be aware there is no going back if you take this step.
Davey126 said:
To my knowledge there is no direct correlation of appstore version to FireOS version. Obviously there's a range but we'd need a 1-1 match to draw a comfortable conclusion.
You can test TWRP bootability by following the guidance in this post. If TWRP boots you can safely sideload FireOS 5.0.1 from here using instructions in this thread (posts #1 and #2). That said, if you have no intention of every installing a custom ROM there really isn't any advantage to retaining an older bootloader. If that's the case might as well sideload FireOS 5.3.1. Be aware there is no going back if you take this step.
Click to expand...
Click to collapse
Ahhhh nuts. I'm getting "FAILED (remote: unknown command)" return on my Win7 machine trying to boot TWRP, and just simple USB transmission OK output on the device. Looks like I'm over 5.0.1.
Guess it's 5.3.1 for me. I'm assuming I can just follow the directions from sd_shadow's unbrick stock recovery ADB sideload thread, yes? Thanks for all of your help, I really appreciate it.
There's a guide to find bootloader version: https://forum.xda-developers.com/amazon-fire/development/identify-bootloader-version-t3424634
Sent from my Amazon Fire using XDA Labs
---------- Post added at 06:01 AM ---------- Previous post was at 05:59 AM ----------
scooter1979 said:
Ahhhh nuts. I'm getting "FAILED (remote: unknown command)" return on my Win7 machine trying to boot TWRP, and just simple USB transmission OK output on the device. Looks like I'm over 5.0.1.
Guess it's 5.3.1 for me. I'm assuming I can just follow the directions from sd_shadow's unbrick stock recovery ADB sideload thread, yes? Thanks for all of your help, I really appreciate it.
Click to expand...
Click to collapse
Just be sure that you don't accidentally update. Don't connect to WiFi until you have KingRoot, and be sure not to let the os update finish downloading. Once you connect, it will start. Some tips I found on how to avoid updates:
Davey126 said:
- use Kingroot 4.92 or lower; avoid v5.x (nearly impossible to remove)
- partial OTA update files are erased each time the device reboots
- KingRoot reboots frequently
- find a slow AP (library, coffee shop, etc) to thoddle the pace of downloads
- enable WiFi only after KingRoot starts and kill it when run completes
- force reboot device if KingRoot hangs for a prolonged period
- you may have to repeat the process multiple times
- there are trickier approaches (eg: IP/domain blocking) with variable results; the above playbook has worked well for most
- good luck
Click to expand...
Click to collapse
Sent from my Amazon Fire using XDA Labs
PorygonZRocks said:
Just be sure that you don't accidentally update. Don't connect to WiFi until you have KingRoot, and be sure not to let the os update finish downloading. Once you connect, it will start. Some tips I found on how to avoid updates:
s
Click to expand...
Click to collapse
Along with not hooking up wifi immediately, I was thinking of using rootjunky's supertool for root & update blocking, as the tool says it's now compatible with 5.3.1. Should be good enough, as long as I don't connect to a network until ALL of the supertool fun is done (I hope).
scooter1979 said:
Along with not hooking up wifi immediately, I was thinking of using rootjunky's supertool for root & update blocking, as the tool says it's now compatible with 5.3.1. Should be good enough, as long as I don't connect to a network until ALL of the supertool fun is done (I hope).
Click to expand...
Click to collapse
You need WiFi to root. That's why you need to be careful, since update starts quickly. Here's the thread the quote was from: https://forum.xda-developers.com/amazon-fire/help/dilemma-t3545062
If you can block the domains linked to in that thread, that'll help. It's not necessary, but it's a good idea.
EDIT: here's the post with them:
HughJeffner said:
Using stock 5.3.1 fresh install here are the domain names used in the update process:
softwareupdates.amazon.com
amzdigital-a.akamaihd.net
The first one is the actual update check, blocking DNS lookup of this domain effectively disabled auto-updates for me YMMV
The second domain name is where the firmware is actually downloaded from (not verified but seems probable). Note that this could change depending on how the update check is implemented.
I recommend blocking DNS resolution of softwareupdates.amazon.com if practical in your situation
Click to expand...
Click to collapse
Sent from my Amazon Fire using XDA Labs
PorygonZRocks said:
You need WiFi to root. That's why you need to be careful, since update starts quickly. Here's the thread the quote was from: https://forum.xda-developers.com/amazon-fire/help/dilemma-t3545062
If you can block the domains linked to in that thread, that'll help. It's not necessary, but it's a good idea.
Click to expand...
Click to collapse
Ohhhhh, I didn't realize Kingroot needs internet access... Besides that, I saw in the tool's changelogs that it even removes Kingroot & puts the normal supersu in the system, so I thought everything was more or less a "normal" rooting procedure. Whoops. Thank you, I'll be DNS blocking before anything.
scooter1979 said:
Ohhhhh, I didn't realize Kingroot needs internet access... Besides that, I saw in the tool's changelogs that it even removes Kingroot & puts the normal supersu in the system, so I thought everything was more or less a "normal" rooting procedure. Whoops. Thank you, I'll be DNS blocking before anything.
Click to expand...
Click to collapse
It removes KingRoot after using it to root. AFAIK, KingRoot is the only thing that can root these tablets. Personally, I'd recommend finding your bootloader version and flashing that, but it's just a personal preference, and has no practical difference unless you have 5.0.x, which you don't. I just like having oldest I can in case a downgrade method is ever found.
Also I may have an updated appstore apk from my brother's 5.3.2.1 tablet, let me check.
EDIT: Nope, I don't. I do, however, have an (old) apk from the Amazon website. See if installing this version helps. Just out of curiosity, could you attach the apk from your current appstore? I'm wondering if it will install on Fire Nexus. The UI looks much better than the version I have downloaded.
Sent from my Amazon Fire using XDA Labs
PorygonZRocks said:
Just out of curiosity, could you attach the apk from your current appstore? I'm wondering if it will install on Fire Nexus. The UI looks much better than the version I have downloaded.
Sent from my Amazon Fire using XDA Labs
Click to expand...
Click to collapse
I'll be happy to if you give me the path, or even the full name of the apk so I can search via root explorer.
scooter1979 said:
I'll be happy to if you give me the path.
Click to expand...
Click to collapse
If you have a file manager, search /system/app and /system/priv-app for com.amazon. venezia. Or, use an app like titanium backup to back it up.
It's taking forever to upload the apk I'm using, so here's the link if you want to test if it works: https://www.amazon.com/appstore_android_app
If not, I think you will need to reflash, unfortunately.
Sent from my Amazon Fire using XDA Labs
PorygonZRocks said:
There's a guide to find bootloader version: https://forum.xda-developers.com/amazon-fire/development/identify-bootloader-version-t3424634
Click to expand...
Click to collapse
Used this method, I'm on 5.1.1 (5.4.1_112720 5.1.1). Dagnabbit, missed it by that much.
scooter1979 said:
Used this method, I'm on 5.1.1 (5.4.1_112720 5.1.1). Dagnabbit, missed it by that much.
Click to expand...
Click to collapse
Then I'd recommend flashing 5.1.1. Like I said, if a downgrade method is found, it will probably be for older versions. Plus it's harder to brick, since only one or two versions are below it.
Sent from my Amazon Fire using XDA Labs
PorygonZRocks said:
It's taking forever to upload the apk I'm using, so here's the link if you want to test if it works: https://www.amazon.com/appstore_android_app
If not, I think you will need to reflash, unfortunately.
Sent from my Amazon Fire using XDA Labs
Click to expand...
Click to collapse
No go. Got a "Application Not Installed" error.
PorygonZRocks said:
Then I'd recommend flashing 5.1.1. Like I said, if a downgrade method is found, it will probably be for older versions. Plus it's harder to brick, since only one or two versions are below it.
Sent from my Amazon Fire using XDA Labs
Click to expand...
Click to collapse
The thing there is, if the issue is indeed related to the age of the appstore, which doesn't look like it has been updated since the OS was, sideloading the same version would put me in the same boat I'm in now. If I drop 5.3.1 on there, that should fix me, assuming the age of the store is the underlying issue. Unless there's something I'm missing.
Ok, my venezia is attached.
scooter1979 said:
No go. Got a "Application Not Installed" error.
The thing there is, if the issue is indeed related to the age of the appstore, which doesn't look like it has been updated since the OS was, sideloading the same version would put me in the same boat I'm in now. If I drop 5.3.1 on there, that should fix me, assuming the age of the store is the underlying issue. Unless there's something I'm missing.
Click to expand...
Click to collapse
A while back, I found a tutorial on how to upgrade system, but keep bootloader the same. Let me look...
Also, if it isn't the age of the app store, it has no effect. You could also try Amazon Underground app. It has a different package name, so it will install alongside the Appstore you have. This way, you can see if it has to do with the store or if it's just not working.
EDIT: Having trouble finding the link. I think what it was is you can download an update file, rename it from *.bin to *.zip, extract system.img, put it on the device, flash it, root, and disable ota immediately. I'll keep looking.
Sent from my Amazon Fire using XDA Labs
Umm, you guys?...
Ya wanna hear something wacky? Just for the fart of it, I ran the apk I just uploaded on my own device, and, um, the store works now. Zero problems. Connects just fine.
Now don't I feel like a horse's patoot?
Well, if nothing else, I learned what DNS to block if I upgrade to 5.3.1, how to check my bootloader via hex editor, and to rely on the kindness of strangers to fall bassackwards into an easy solution. Yeesh.
scooter1979 said:
Ya wanna hear something wacky? Just for the fart of it, I ran the apk I just uploaded on my own device, and, um, the store works now. Zero problems. Connects just fine.
Now don't I feel like a horse's patoot?
Well, if nothing else, I learned what DNS to block if I upgrade to 5.3.1, how to check my bootloader via hex editor, and to rely on the kindness of strangers to fall bassackwards into an easy solution. Yeesh.
Click to expand...
Click to collapse
Oh. Well, I found the thread, if you want. It gives instructions for FlashFire as well.
https://forum.xda-developers.com/amazon-fire/general/howto-install-fireos-5-1-1-root-gapps-t3265594
Sent from my Amazon Fire using XDA Labs
---------- Post added at 07:37 AM ---------- Previous post was at 07:32 AM ----------
scooter1979 said:
Ok, my venezia is attached.
Click to expand...
Click to collapse
Was there a .odex in the folder, and/or a lib folder? If so, could you also upload that? If not, then it appears it will not work. Shame. Thanks for the apk.
Sent from my Amazon Fire using XDA Labs
Hi,
How do I just root my OnePlus 3T? I want to keep everything the same but just be able to have root to install adblock.
Model - A3000
Oxygen - 4.0.3
Android - 7.0
Rob94 said:
Hi,
How do I just root my OnePlus 3T? I want to keep everything the same but just be able to have root to install adblock.
Model - A3000
Oxygen - 4.0.3
Android - 7.0
Click to expand...
Click to collapse
Unlock your boot loader, flash twrp and install supersu to root. or you can also try dns66 to block ads, it works without root.
https://fossdroid.com/a/dns66.html
bonham1988 said:
Unlock your boot loader, flash twrp and install supersu to root. or you can also try dns66 to block ads, it works without root.
https://fossdroid.com/a/dns66.html
Click to expand...
Click to collapse
I'm new to android, switched from ios. I'm not familiar with the terms, how would you do these? "Unlock your boot loader, flash twrp and install supersu to root."
Rob94 said:
I'm new to android, switched from ios. I'm not familiar with the terms, how would you do these? "Unlock your boot loader, flash twrp and install supersu to root."
Click to expand...
Click to collapse
here a guide https://forum.xda-developers.com/oneplus-3t/how-to/guide-how-to-root-oneplus-3t-unlock-t3544391
but if you just want Adblock, I'd suggest you try dns66 instead of root.
bonham1988 said:
here a guide https://forum.xda-developers.com/oneplus-3t/how-to/guide-how-to-root-oneplus-3t-unlock-t3544391
but if you just want Adblock, I'd suggest you try dns66 instead of root.
Click to expand...
Click to collapse
I installed the adb program but where are the files? I'm stuck on this step 2:30 in the video.
Rob94 said:
I installed the adb program but where are the files? I'm stuck on this step 2:30 in the video.
Click to expand...
Click to collapse
What files?
Sent from my OnePlus3T using XDA Labs
bonham1988 said:
What files?
Sent from my OnePlus3T using XDA Labs
Click to expand...
Click to collapse
I got past that part but now im stuck. I'm trying to install supersu but my computer isn't finding the oneplus 3t in my computer so I can't drag supersu to my phone to install it.
Part 8:47
https://www.youtube.com/watch?v=wwd31NU7VC0&feature=youtu.be
Everytime I plug in my phone I see this in device manager. Even though I install the ADB.
site to upload photos
I got it to work, just had to manually install MTP driver.
Could you help me find a guide for adblock install and in-app purchases?
Rob94 said:
Could you help me find a guide for adblock install and in-app purchases?
Click to expand...
Click to collapse
Google "AdAway XDA". The first result is the thread for the AdAway app.
And what do you mean in-app purchases? You install an app from the Play Store, tap the in-app button, add your gift card and/or credit/debit card (if required), buy.
If you're talking about circumvention, you are NOT going to get help here, AT ALL. This is not one of those places for that mess.
Rob94 said:
Could you help me find a guide for adblock install and in-app purchases?
Click to expand...
Click to collapse
Ad block you don't need any guide. Just install the apk from f-droid. When you'll open the app it will prompt you to grant root access. Just click yes and you have to enable adblock from the app.
Sent from my OnePlus3T using XDA Labs
Rob94 said:
I'm new to android, switched from ios. I'm not familiar with the terms, how would you do these? "Unlock your boot loader, flash twrp and install supersu to root."
Click to expand...
Click to collapse
I know you are new here, and here is some friendly advice:
1) Search before you post! Most of the info you want, and probably ever want, is already on XDA. It's probably been asked and answered before, probably numerous times. There are a number of guides posted for basic things, like how to root. Just using the search function, or for that matter just browsing through the thread titles will often yield a lot of the info you are looking for. Also, there are resource threads like the Index at the top of the 3T "Guides, News & Discussion" section, which organizes a lot of the useful threads and other resources (with links). Be sure to take advantage of these threads "sticky" to the top of each section.
Only after you have done your due diligence, and can't find what you're looking for, should you make a new thread. If every person who was wondering "how to root" made a new thread asking that, this whole website would quickly become a cluttered, useless mess. The folks here are happy to provide help and try to answer your questions, but only after you've taken at least a little time to try to find the answer yourself.
2) You need to slow down and do some learning and reading. This is something you should have done before starting to do any of the steps toward root. Halfway down the phone modding rabbit hole is not the time to be asking questions like "how do I put the SuperSU zip on the phone".
I've been around here a long time, and modded/rooted a lot of devices. Even so, every time I get a new device, I spend at least an hour or two reading about the root methods (plus possible pitfalls, issues, etc.) for that specific device (as every one has it's own peculiarities and nuances). I simply can't fathom jumping into the root/mod process without this minimum due diligence.
3) Make sure you understand the meaning and implications of an unlocked bootloader, root, etc. There are benefits, and there are also risks. When someone comes on here asking the questions you are asking, what often comes to mind is that a person with that lack of knowledge has no business having root. This isn't to be mean, it's just a fact (at least as I see it).
Side note: I'm not a fan of YouTube guides. They have a place, in conjunction with (but not a replacement for) proper reading and understanding. Just following one of those videos, without doing any other learning, is going to get you in trouble. You'll only know enough to get yourself into a jam (which is inevitable if you play with these devices), without a clue of how to get out. Know (at a minimum) how to recover or get back to stock. Case in point, the linked video skipped what is to me, a critical step. You should always make a TWRP backup before flashing any mods like root or custom ROM. It's not technically a "requirement" but to me, its a must. This gives you an easy way out, if anything goes wrong (and it eventually will). Sure, there are other ways to recover. But the simple step of making a TWRP backup is one way, that doesn't require any additional downloads, tools, etc. It's simply a no-brainer to me, to do this.