Database Develop

Blackview BV6000 Xposed Problem

Hello,
I have a Problem with Xposed on My Blackview BV 6000
Xposed Installer says Xposed is active (ver. 86) but none of the modules are working.
The modules alwasy asking me to activate them in Xposed and reboot, if iam doing so its the same after the next reboot.
I Tried this with some modules and it seems like really none of them is working.
I tried:
Xprivacy
Audio Balance
CPU Temp
and some more others.
Im Using a Blackview BV6000
It is a Android 6.0 Device
Im using Xposed-v86-sdk23-arm64
APK is: XposedInstaller_3.0_alpha4
I´am Using SuperSu v 2.76
When i Try to Read the Logs In Xposed it says No Such File or Directory....
Hope somebody can help me...

noboby said:
Hello,
I have a Problem with Xposed on My Blackview BV 6000
Xposed Installer says Xposed is active (ver. 86) but none of the modules are working.
The modules alwasy asking me to activate them in Xposed and reboot, if iam doing so its the same after the next reboot.
I Tried this with some modules and it seems like really none of them is working.
I tried:
Xprivacy
Audio Balance
CPU Temp
and some more others.
Im Using a Blackview BV6000
It is a Android 6.0 Device
Im using Xposed-v86-sdk23-arm64
APK is: XposedInstaller_3.0_alpha4
I´am Using SuperSu v 2.76
When i Try to Read the Logs In Xposed it says No Such File or Directory....
Hope somebody can help me...
Click to expand...
Click to collapse
Hi.
You can try my grorkmod. It was created for the Telephone p9000, but works also for other chinaphones.
It look like mediatek (?) had a bug in their boot.img.
To be sure you can provide the following files:
/file_contexts
/seapp_contexts
Greetings
Vsrookie
Grorkmod v1.0
Sent from my P9000 using XDA-Developers mobile app

vsrookie said:
Hi.
You can try my grorkmod. It was created for the Telephone p9000, but works also for other chinaphones.
It look like mediatek (?) had a bug in their boot.img.
To be sure you can provide the following files:
/file_contexts
/seapp_contexts
Greetings
Vsrookie
Grorkmod v1.0
Sent from my P9000 using XDA-Developers mobile app
Click to expand...
Click to collapse
I installed my Backup to have a Clean Start, then i installed grorkmod like is in the discription in the grorkmod-thread.
I Looks like Xposed is Working fine Now.
Thank You very Much for your Hint!

I can confirm grorkmod to fix xposed on my BV6000 FW20160713.
What I did:
- Flash TWRP Recovery with the sp-flash-tool (I used Version 1628 linux)
- boot into recovery
- install Supersu
- boot into system
- install busybox
- generate a ZIP file within the busybox app (and copy it to external sd)
- power off
- boot into recovery
- wipe Dalvik/ART Cache
- wipe entire System/Data (factory reset)
- power off (either by entering halt in terminal or by holding down the power button)
- reflash 20160713_s12v55_jk_3m with sp-flash-tool, replacing recovery.img with the TWRP one. (I suppose you can just exclude it, as it is still installed)
- boot into recovery
- wipe cache again (don't know if necessary)
- install busybox, supersu, grorkmod, xposed
- reboot into system
- installed xposedinstaller
- rebooted (through normal system's power button, not xposedInstallers menu)
- activated xprivacy in xposedinstaller
- installed xprivacy
- rebooted (again the system way)
Success
The hardware reboot within xposedinstaller still returns the error:
sush: <stdin>[8]: /data/user/0/de.robv.xposed.installer/cache/busybox-xposed:not found
The software reboot did produce a bootloop, though that was before I found grorkmod. I do not intend to try it out again.
@vsrookie
What worries me a bit:
Understand this:
SELinux is a abbreviation for Security Enhanced Linux. That isn't just a name, it's the programm.
With this mod you will loose the S in the name.
Click to expand...
Click to collapse
Would it make sense to make a "grorkmod-lite" that only fixes the broken contexts? (I know this question might sound dump)

hanseatic2 said:
I can confirm grorkmod to fix xposed on my BV6000 FW20160713.
What I did:
- Flash TWRP Recovery with the sp-flash-tool (I used Version 1628 linux)
- boot into recovery
- install Supersu
- boot into system
- install busybox
- generate a ZIP file within the busybox app (and copy it to external sd)
- power off
- boot into recovery
- wipe Dalvik/ART Cache
- wipe entire System/Data (factory reset)
- power off (either by entering halt in terminal or by holding down the power button)
- reflash 20160713_s12v55_jk_3m with sp-flash-tool, replacing recovery.img with the TWRP one. (I suppose you can just exclude it, as it is still installed)
- boot into recovery
- wipe cache again (don't know if necessary)
- install busybox, supersu, grorkmod, xposed
- reboot into system
- installed xposedinstaller
- rebooted (through normal system's power button, not xposedInstallers menu)
- activated xprivacy in xposedinstaller
- installed xprivacy
- rebooted (again the system way)
Success
The hardware reboot within xposedinstaller still returns the error:
sush: <stdin>[8]: /data/user/0/de.robv.xposed.installer/cache/busybox-xposed:not found
The software reboot did produce a bootloop, though that was before I found grorkmod. I do not intend to try it out again.
@vsrookie
What worries me a bit:
Would it make sense to make a "grorkmod-lite" that only fixes the broken contexts? (I know this question might sound dump)
Click to expand...
Click to collapse
Hi.
Thank you for trying my mod.
This was a hint for the old version < 1.0.
In 1.0 everything is fine. It "only" fixes the needed files.
greetings
vsrookie
Sent from my P9000 using XDA-Developers mobile app

If you update firmware via official OTA to avoid boot loop uninstall xposed by flashing the zip xposed Uninstaller for marshmallow(on xda thread)! After first reboot u have to re flash supersu grorkmod and xposed (clearing caches). I've lost two hours to understand!

vsrookie said:
Hi.
Thank you for trying my mod.
This was a hint for the old version < 1.0.
In 1.0 everything is fine. It "only" fixes the needed files.
greetings
vsrookie
Sent from my P9000 using
Click to expand...
Click to collapse
Which version do you think (or know) will be better for BV6000 rooted with GizBeat manual? 1.0? or 1.1?

Xposed Bv6000 Android7
Hi
I rooted my BV6000 on Android 7.
Is it possible to install XPOSED?
And if, how? (no rom of android 7 available; people with bricked phones after downgrading)
Thanks for your help!!!
Cheers

Blackview BV6000 Flashing Android 7.0
Follow the link below if you wish to #FLASH your #BLACKVIEW #BV6000 with the latest official #Android 7.0 #NOUGAT firmware..
https://dreamworks75.blogspot.in/2017/08/rom-flashing-guide-blackview-bv6000.html

[Magisk/Root/Xposed/Busybox]Huawei P9 Lite

-This methode is old but working with emui 4 Android MM (6). Not work with Android N (7).
-Xposed not work in systemless mode if your Android security patch is >= november 2016
-Try to search the last version of zip files and apk on google, the version on this tutorial is old.
Hi!
This tutorial will install Magisk, phh's superuser, xposed and busybox on your Huawei P9 lite device!
Tested on a VNS-L31C432B151 version but normally work on all VNS-L31 and VNS-L21.
Magisk will allow you to "hide" the root... not realy just hide because Magisk and phh's superuser systemless edition create the root outside the system folder!
Magisk feature for common user:
-"hide" root (PokémonGo, Androidpay, banking app, ... all work!) work with
-Magisk not only allow you to replace existing file and directories, but also support adding new files and directories into system!
-Update OTA work! (not tested by me)
For more detail visite this post: http://forum.xda-developers.com/android/software/mod-magisk-v1-universal-systemless-t3432382
Phh's superuser work at 100% on this device
After a lot of Xposed version tested I can say that Xposed systemless edition is by far the best for P9 lite!
DONT install busybox on system folder!
Ok let's go:
1 Update your system on last emui version and swipe data/factory reset to get a clean and untouched device!
2 Unlock your bootloader (see multiple method on this forum)
3 Install TWRP 3.0.2.0 (see multiple method on this forum)
4 Download this files: Magisk V6.zip / phh's superuser 17.zip / xposed-v86.5-sdk23-topjohnwu.zip / Magisk Manager.apk / XposedInstaller_by_dvdandroid.apk. Put all this files on your externalSD.
5 Go to TWRP recovery and flash in order [Magiskv6.zip > phh's_superuser.zip > Xposed-v.86.5.zip] also reboot your device.
6 When you are on the homescreen go reboot again.
7 Install Magisk Manager.apk and XposedInstaller.apk, then go to the playstore download and install Phh's SuperUser app AND Busybox meefik. Reboot after this step.
8 Open your setting app and allow permission SD card to Busybox.
9 Open Busybox >> settings. Remplace the path file /system/xbin/ with /data/busybox/ and check "Remplace Applets". Also go Menu Zip Archive and download this zip.
10 Go on TWRP recovery and flash the busybox zip file.
10 please perform 3 or 4 reboot
DONE!
So, please try to open yours setting app. if it appears you have done! If not, please try again this method
Now, go Magisk Manager (app) and switch root togle off, launch your protected against root app and normally work!
(Dont need reboot between switch root off/on!)(Selinux switch work, but not persist a boot)
Have fun!

Well done. Works perfect.

The are no files any more

Links are dead

deleted

Evas0r said:
Battery draining after the process...
Is this xposed fault?
Click to expand...
Click to collapse
yes u have to flash another version

Did anyone try this on Nougat/Android 7?

Alexander33 said:
Did anyone try this on Nougat/Android 7?
Click to expand...
Click to collapse
TWRP with this [RECOVERY]Revolution Recovery Android Nougat {15-12-16} Beta .9 in Nougat but anything I tried to flash failed.

Is there anything one can do to get Pokémon Go working while having all of these installed?

Alexander33 said:
Did anyone try this on Nougat/Android 7?
Click to expand...
Click to collapse
Hey, man I've tested it on my Huawei P9-LITE B370 and it all works perfectly. To flash Magisk, you need this custom recovery (https://forum.xda-developers.com/huawei-p9lite/development/twrp-t3588356)

this really helped me thanks

Helped me alot. Still, post is a bit old, so what I did on b380 version:
FLASH RECOVERY twrp-3.1.1-0-venus.img
FLASH KERNEL Elite+Kernel+for+P9+Lite+CxxB3xx+v10.1.zip
ROOT with Magisk-v13.0(96f8efc).zip
INSTALL busybox archive via recovery to /sbin (for me it installed on /system/xbin, still ok.)
REBOOT after each step
Finally works ! :good:

is this Magisk work on Huawei P9?

I have Emui 5.0 and Android 7.0. I flashed everything except xposed but I still can't use Pokémon Go or Snapchat. Is it beacause i can't flash xposed? And when yes, how can I fix it?
Lg ThePrinoob

ThePrinoob said:
I have Emui 5.0 and Android 7.0. I flashed everything except xposed but I still can't use Pokémon Go or Snapchat. Is it beacause i can't flash xposed? And when yes, how can I fix it?
Lg ThePrinoob
Click to expand...
Click to collapse
flash magisk v13

simo255 said:
flash magisk v13
Click to expand...
Click to collapse
Ok, I will test it!

I installed magisk v13 and got the app but it when it check safety net it doesnt work. What should I do?

ThePrinoob said:
I installed magisk v13 and got the app but it when it check safety net it doesnt work. What should I do?
Click to expand...
Click to collapse
enable magisk hide and see if usb debugging is enabled

simo255 said:
enable magisk hide and see if usb debugging is enabled
Click to expand...
Click to collapse
Okey thank you it worked.

Hey,
If I open the camera app or snpachat I cant make any picture so I have a blackscreen. What should I do? And in youtube or Instagram I cant see videos, they dont load and I also cant hear any sound.
Sorry for my bad english.

[ROM]Multi-Rom Tripl3t B594 Odex

http://pecholite.blogspot.com.es/2017/03/multi-rom-tripl3t-b594-odex.html?m=1
MULTI-ROM TRIPL3T B594 ODEX
Multi-rom Tripl3t is the first rom for pecholite that adapts to all types of users and allows to start the smartphone with Emui 4.0, LineageOS 14.1 or AOSP 7.1.1 (Nougat).
I present my first custom rom based on fellow cerberus v2 + John Miller . The Lineage part is @XePeleato and the Aosp of @haky86.
Too much for you?
More novice users should not be scared because the installation and configuration is incremental and that is why I say that it fits any user profile.
User Profiles:
Depending on the concerns that are most suited to your profile you should take the installation to the point that best meets your needs.
As a user I want ...
1- I want a stock experience with some extras but without Root.
You must install the rom file by TWRP and dot. The rom is the same as the cerberus V2 but comes with no root.
It incorporates among others ..., gyroscope, call recording, multiwindow ...
REQUIRED REQUIREMENTS:
-Bootloader Unlocked.
-TWRP
- Android 6 - C432B594 Stock - Recommended.
2- I want you to have root access too.
After installing the rom you must enter the store and download the application magisk manager and ready. You already have root access and get the most out of the rom, but not only that, but root access can be hidden to play PoGo or use payment applications and pass the SafetyNet test.
3- I want to activate extra functions and transform and customize the rom butt.
Well what you have to do is install this file from TWRP point.
We will achieve the following:
- Activate Multiuser
- Enable Local Update
- You can choose whether to install the Huawei magnifier or not
- Busybox, Viper4Android and SLC disappear
- You can choose to install the busybox and the viper in a systemless way and in this way the SLC is no longer necessary
- Advanced Reset
- New lock screen 100% customizable.
- The screen automatically turns on and off when opening and closing the mobile phone case
- Incorporates system apps uninstaller
- Total Commander
- Greenify
- Etc...
4- I want to be able to choose which rom to start the smartphone.
For that it is necessary to have followed steps 1, 2 and 3 and it is necessary to configure magisk to have default access to all requests per adb and applications and install the multiboot option.
To install Dualboot you must go to the file EXTRAS.ZIP that you will find inside the system folder of the rom. Uncompress your content in the external memory and install the DualBoot app and keep the files in memory because we will need them for later.
Then we start the dualboot application to be granted superuser permissions automatically. Then with SimpleReboot we restart a recovery and make a backup of boot.img in case something goes wrong, since it will be the only thing we will need to repair a possible failure or error.
VERY IMPORTANT: We need to have 3Gb of available space in the External SD for each additional rom we want to install, that is, if we are going to install Lineage and Aosp we will need 6Gb of available space.
4.1- I want AOSP.
We must download these files and install them at the same time and in order from TWRP
- Rom
- Aniboot
- Gaaps
- Magisk
4.1- I want LineageOS.
We must download these files and install them at the same time and in order from TWRP
- Rom
- Aniboot
- Gaaps
- Magisk
4.3 I want the 3 Roms at a time.
Then follow steps 4.1 and 4.2
Restarting the system will take us directly to the last ROM installed. Once started and configured we installed the dualboot app that we had left on hand in the external SD. Repeat the operation on each of the additional roms installed. Once installed dualboot in all you can remove the app from the sd and of course all the corresponding installation files.
To change rom you have to enter the dualboot app and choose which one to start the system and restart.
MENTAL NOTE 01:
The 3 roms will have the same bugs as the originals. I am not yet qualified to fix them or even try, but I think that to be my first job is more than enough.
MENTAL NOTE 02:
The DualBoot application also installs an app called Leaks that controls possible bugs to send them to the original DualBoot developer.
I do not want to forget to give credits and thanks for:
@topjohnwu for creating magisk
@chenxiaolong for creating DualBoot and @BrainNotFound for portarlo
+ John Miller to create CerberusV2
@haky86 for creating Aosp and CWMR
@XePeleato for creating LineageOs and TWRP and Kernel
Greetings from Barcelona (Catalonia)

Fedroid said:
MULTI-ROM TRIPL3T B594 ODEX
Multi-rom Tripl3t is the first rom for pecholite that adapts to all types of users and allows to start the smartphone with Emui 4.0, LineageOS 14.1 or AOSP 7.1.1 (Nougat).
I present my first custom rom based on fellow cerberus v2
Click to expand...
Click to collapse
Please delete, XDA app crashed while writing

Fedroid said:
MULTI-ROM TRIPL3T B594 ODEX
Multi-rom Tripl3t is the first rom for pecholite that adapts to all types of users and allows to start the smartphone with Emui 4.0, LineageOS 14.1 or AOSP 7.1.1 (Nougat).
I present my first custom rom based on fellow cerberus v2
Click to expand...
Click to collapse
Link please :laugh::laugh::good::good:

kilroystyx said:
Link please :laugh::laugh::good::good:
Click to expand...
Click to collapse
MULTI-ROM TRIPL3T B594 ODEX
http://pecholite.blogspot.com.es/2017/03/multi-rom-tripl3t-b594-odex.html?m=1

Fedroid said:
MULTI-ROM TRIPL3T B594 ODEX
http://pecholite.blogspot.com.es/2017/03/multi-rom-tripl3t-b594-odex.html?m=1
Click to expand...
Click to collapse
Why in the screenshots there is a ss with a lockscreen asking for a fingerprint to unlock? I know that no P8Lite has a fingerprint sensor

hi6120sft ale-l21 said:
Why in the screenshots there is a ss with a lockscreen asking for a fingerprint to unlock? I know that no P8Lite has a fingerprint sensor
Click to expand...
Click to collapse
Because it is cool, no more reasons sorry

I stucked on a first logo

blewko said:
I stucked on a first logo
Click to expand...
Click to collapse
Try a factory reset with stock recovery and flash again.
It helps in most cases

Does Xposed from Magisk work on our device?
I tried, but it stucks at boot logo.

arviit said:
Does Xposed from Magisk work on our device?
I tried, but it stucks at boot logo.
Click to expand...
Click to collapse
he should work... i have magisk and xposed but on C432B596 ROM

arviit said:
Does Xposed from Magisk work on our device?
I tried, but it stucks at boot logo.
Click to expand...
Click to collapse
It worked for me once but I think I reflashed something or so and then it didn't. After flashing it wait at least 1 hour before stopping the boot. After that, it doesn't seem to work.
xander33 said:
he should work... i have magisk and xposed but on C432B596 ROM
Click to expand...
Click to collapse
Are you passing Safety net?

arviit said:
Does Xposed from Magisk work on our device?
I tried, but it stucks at boot logo.
Click to expand...
Click to collapse
It works. Flash Xposed and don't forget to wipe cache.
Phone will start in about 30 minutes.
It works. Use SDK 23 for this rom

Vinnipinni said:
It worked for me once but I think I reflashed something or so and then it didn't. After flashing it wait at least 1 hour before stopping the boot. After that, it doesn't seem to work.
Are you passing Safety net?
Click to expand...
Click to collapse
No with the B596 ROM (i think its related to the new security patch)
With the B588 instead you have to disable xposed reboot the phone and safety net will be ok

xander33 said:
No with the B596 ROM (i think its related to the new security patch)
With the B588 instead you have to disable xposed reboot the phone and safety net will be ok
Click to expand...
Click to collapse
I can confirm Xposed works. Not the Magisk one though.
Use the one from the mega root thread https://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994.
I also know the xposed torch works. Like to recommend xEmui module.

[TOOL] Magisk Module Manager for recovery v2.5 (Magisk 19)

Since mm isn't working on new Magisk 19, I took it for inspiration and created a simple manager, just for bypass some "bootlooper" module.
Just install it using recovery and run on terminal /data/media/magisk.
v1.0 - Initial build. Enabling and disabling functions
v2.0 - Added module removal function
v2.5 - No need to use storage to work. May avoid issues. Some others minor changes.
All thanks to
- topjonhwu for Magisk
- VR25 for mm
- TWRP team
- Me? Idk

Great work dev[emoji106], thanks

doesn't works for me (doesn't list modules)

mrhamed said:
doesn't works for me (doesn't list modules)
Click to expand...
Click to collapse
To list modules the script needs to write on /cache or /data. It will choose by itself.
Please send some screenshot of issue.

Looks very promising, especially enjoy having a GUI for this.

mrhamed said:
doesn't works for me (doesn't list modules)
Click to expand...
Click to collapse
I'm working to make script use no external files, so script will depends completely on your recovery binaries.
Hope to release it soon.

I suffer a boot freeze because of a bad module.
Cannot use TWRP and don't have module like Magisk Core Only installed.
I cannot boot to rooted system because of bad module.
Can boot non-rooted system only.
For my device LYA (Mate 20 Pro) which for rooting is using root-through-recovery-boot I can patch boot image with whatever Magisk edition which I assume is the best way to recover the device without full wipe.
Can a Magisk version be easily built which will either skip loading custom modules or delete them during boot? After successfully booting rooted I would flash a standard Magisk.

mikeos said:
I suffer a boot freeze because of a bad module.
Cannot use TWRP and don't have module like Magisk Core Only installed.
I cannot boot to rooted system because of bad module.
Can boot non-rooted system only.
For my device LYA (Mate 20 Pro) which for rooting is using root-through-recovery-boot I can patch boot image with whatever Magisk edition which I assume is the best way to recover the device without full wipe.
Can a Magisk version be easily built which will either skip loading custom modules or delete them during boot? After successfully booting rooted I would flash a standard Magisk.
Click to expand...
Click to collapse
I don't know if I got it correctly.
Well... commonly modules won't survive after Magisk removal.
If you can't access TWRP for flash Magisk uninstaller or disable the problematic module, you can try to flash or even boot the ROM's stock kernel through fastboot.
But if such module did others modifications into data, so you'll have to reflash whole ROM.

Are you planning on publishing this on magisk repo?

This has saved my bacon at least 4 times since installing it, many thanks Adriano

Saved me from bootloop module, works like a charm!

Adriano-A3 said:
Since mm isn't working on new Magisk 19, I took it for inspiration and created a simple manager, just for bypass some "bootlooper" module.
Just install it using recovery and run on terminal /data/media/magisk.
v1.0 - Initial build. Enabling and disabling functions
v2.0 - Added module removal function
v2.5 - No need to use storage to work. May avoid issues. Some others minor changes.
All thanks to
- topjonhwu for Magisk
- VR25 for mm
- TWRP team
- Me? Idk
Click to expand...
Click to collapse
It gives me the error "WTF?! The directory was here just now! It's gone! Please try again... Exiting..."

Thx bro, you saved my day

PixelHead0_0 said:
It gives me the error "WTF?! The directory was here just now! It's gone! Please try again... Exiting..."
Click to expand...
Click to collapse
Same here, on Samsung S10+ with August update, latest Magisk and Twrp.

very useful for android 10, thank you sir !

I can't understand how to run it on the terminal

will it work with Magisk 20.0??

Sivabalan said:
will it work with Magisk 20.0??
Click to expand...
Click to collapse
have you tried it? does it work on magisk 20.1

Confirmed working with Magisk 20.1, thanks a ton for this!

working on 20.2 + android 10

[SHARE] LineageOS 19/18.1 android 11 and 12 Combined galaxy tab A 10.1 (2019)SM-T515/SM-T510

First of all this is not my work is just tried this rom and its preety stable. Thanks to developers @phhusson @Magendanz
DESCLAIMER :use it your own risk.
So finally this rom booted on galaxy tab SM-T515 everything thing is working with small bugs as mentioned below.
Download files given below:
Bugs :
1)voLTE: not working tried phh treble settings to solve the issue but no luck.
Other networks, data calling works perfectly
2)MTP: mtp not working but you can transfer files after booting device in TWRP mode
3)audio not recording in videos use open camera app and go to settings and set default audio as a source.
4)For Linageos 19 android 12 twrp internal storage nonaccesible so to restore back to stock ROM just falsh latest Odin firmware using
ODIN app
Reverting to Samsung oneui:
For Linageos 19 android 12 twrp internal storage nonaccesible so to restore back to stock ROM just falsh latest Odin firmware using
ODIN app
Download firmware using this app:
Download link for Android/Linux/Mac/Windows:
Releases · zacharee/SamloaderKotlin
Contribute to zacharee/SamloaderKotlin development by creating an account on GitHub.
github.com
Linageos18.1 user restore your oneui backup using twrp or use ODIN firmware.
Except these you can check and tell me I didn't found anything till now
Download this gsi fileonly this is compatible)
https://sourceforge.net/projects/andyyan-gsi/files/lineage-18.x/lineage-18.1-20211010-UNOFFICIAL-treble_a64_bvS-vndklite.img.xz/download
Download arm 32 android 11 gapps :
The Open GApps Project
OpenGApps.org offers information and pre-built packages of The Open GApps Project. The Open GApps Project is an open-source effort to script the automatic generation of up-to-date Google Apps packages. All Android versions and platforms supported.
opengapps.org
Linageos 19 android 12Gapps included)
https://sourceforge.net/projects/andyyan-gsi/files/lineage-19.x/lineage-19.0-20220114-UNOFFICIAL-treble_a64_bgS.img.xz/download
Download magisk zip:
https://dl.magiskapp.com/MagiskZip/Magisk-v23.0.zip
If you gets device certification error follow this post:
How to Fix the "Device is not Certified by Google" Error
Are you having trouble with signing in to your Google account? Can't access the Google Play Store or use Google apps like Gmail, Maps, Play Music, or Photos? Seeing a "device is not certified by Google" error? Here's how to fix that.
www.xda-developers.com
XZ file extractor android app:
GZ & XZ Extract - File Opener - Apps on Google Play
Extractor tool for tar, tar.gz, gz, gz2 & xz files. Just few taps for result
play.google.com
Process :
1)Download all files given first extract xz file gsi file using xz extractor you gets img file.
2)Now transfer gsi.img, gapps and magisk file in tablet.
3)boot tablet to TWRP MODE
4)Now first select wipe >advance wipe>select system> slide
5) now go back click install click install img you will see your file click on it and select system partition and enter.
6) now we have to install gapps but we need to first resize system partition so
First click mount and mount system Partation now go to wipe>advance wipe>select system >clcik repair >click resize
7)now click install and. Select gapps and flash.
8)now go back install magisk and hit reboot.
After reboot you may face device certification error so to solve this go to magisk and install magisk hide props configuration module and reboot your phone.
[MODULE] [DEPRECATED] MagiskHide Props Config - SafetyNet, prop edits, and more - v6.1.2
MagiskHide Props Config v6.1.2 Note: This project is dead, and has been for some time. I have not been involved in the Android modding scene for some time and I no longer have the energy to take it up again. If anyone feels like taking over...
forum.xda-developers.com
Follow this video i will update thread soon
Android 11 Linageos 18.1
Android 12 lineageOS 19

How's the battery life?

works offline charge?

Pinage said:
How's the battery life?
Click to expand...
Click to collapse
Best battery life

Spawacz_Reduktor said:
works offline charge
Click to expand...
Click to collapse
Yes

@pankspoo
Have you tried LOS 19? I saw your video on aosp 12 build but from your video it seems that it sucks! Lineage I feel will be miles better than aosp so if you can try and get back it'll be really helpful!

Sukrith said:
@pankspoo
Have you tried LOS 19? I saw your video on aosp 12 build but from your video it seems that it sucks! Lineage I feel will be miles better than aosp so if you can try and get back it'll be really helpful!
Click to expand...
Click to collapse
Yes same time but that has grafix shutter issue same like gsi

pankspoo said:
Yes same time but that has grafix shutter issue same like gsi
Click to expand...
Click to collapse
There seems to be a new build, can you maybe try? It's based on 6th November build.

Sukrith said:
There seems to be a new build, can you maybe try? It's based on 6th November build.
Click to expand...
Click to collapse
Ok

In January I installed 17.1 using this ROM. Do I need to go through the whole process of resizing the partition, since I already did it for 17.1?

Never mind! I went ahead and installed it following the instruction . It works, thanks!

bedwere said:
Never mind! I went ahead and installed it following the instruction . It works, thanks!
Click to expand...
Click to collapse
Are you happy with this ROM?

Krekle said:
Are you happy with this ROM?
Click to expand...
Click to collapse
Yes, it's very stable.

I have one issue and some questions.
When using a Bluetooth Headset, I have no sound in apps like Jitsi. Mic on the Bluetooth Headset is working in Jitsi, the others can here me. When using e.g. youtube in Chromium I can hear sound via the Bluetooth Headset.
I checked "Force-disable A2DP offload" and restarted, still the same.
Any Ideas?
And some Questions:
- Is magisk only needed for root? I don't need to root, do i still have to install magisk?
- in twrp I can't mount the system partition, so I cant fix it, but the rom is working. So how to mount system?
- I don't want gapps, is it ok to use the roms without gapps? so eg this one ...treble_a64_bvS.img ?
- in the description downloadlinks you are using: 18: treble_a64_bvS-vndklite but 19: treble_a64_bgS, so should one use vndklite for 18 but not for 19? Or also for 19? What is better? ...
Regards

This is confirmed to work on the T-510? Curiosity will brick the tab, like it kills the cat....

Shawnashley said:
This is confirmed to work on the T-510? Curiosity will brick the tab, like it kills the cat....
Click to expand...
Click to collapse
Yep. It works. I previously had the latest Nexus rom flashed on my SMT-510, so in TWRP I just flashed Lineage 19.1 to system, formatted data, rebooted and it loaded successfully. With Magisk 24.1. It all runs surprisingly well. No issues so far other than no USB file transfer or ability to mount System partition.

HansMampf said:
I have one issue and some questions.
When using a Bluetooth Headset, I have no sound in apps like Jitsi. Mic on the Bluetooth Headset is working in Jitsi, the others can here me. When using e.g. youtube in Chromium I can hear sound via the Bluetooth Headset.
I checked "Force-disable A2DP offload" and restarted, still the same.
Any Ideas?
And some Questions:
- Is magisk only needed for root? I don't need to root, do i still have to install magisk?
- in twrp I can't mount the system partition, so I cant fix it, but the rom is working. So how to mount system?
- I don't want gapps, is it ok to use the roms without gapps? so eg this one ...treble_a64_bvS.img ?
- in the description downloadlinks you are using: 18: treble_a64_bvS-vndklite but 19: treble_a64_bgS, so should one use vndklite for 18 but not for 19? Or also for 19? What is better? ...
Regards
Click to expand...
Click to collapse
I can only answer some of your questions:
- Magisk is only used for root. It's not required.
- Mounting /system in TWRP or in a File explorer doesn't seem to be possible.
- GApps is built in to roms with "...bgS.img.xz". For vanilla roms without gapps download the "...bvS.img.xz"file.
- For LOS 19, I flashed treble_a64_bgS and didn't have an issue. I can't comment on the vndklite version or what it's used for since I never tried it.

betacrypt said:
Yep. It works. I previously had the latest Nexus rom flashed on my SMT-510, so in TWRP I just flashed Lineage 19.1 to system, formatted data, rebooted and it loaded successfully. With Magisk 24.1. It all runs surprisingly well. No issues so far other than no USB file transfer or ability to mount System partition.
Click to expand...
Click to collapse
Any idea about success of I am running Megadanz 11.0 ROM?

Shawnashley said:
Any idea about success of I am running Megadanz 11.0 ROM?
Click to expand...
Click to collapse
It's a good rom and works very well. I was using it before I upgraded to LOS19.1.

Hey there!
I Installed this a couple of weeks ago, but has to reinstall nexus stock 11.0 pretty quickly, as after spending an evening trying to fix issues, it just wouldn't work.
Issues:
1) App crashes are constant. I cannot open Chrome, YouTube, Google Podcasts, Twitter - they all crash to launcher. - Cache, dalvik and data was cleared, still nothing
2) Gesture Navigation is missing - is it meant to be?
3) Magisk installs successfully,, but is then not recognised by the app, meaning no modules. - Is that normal?
Does anyone have any idea on how I could fix these issues, so I can install again?
Many thanks