Database Develop

Bootloader version 3.41 problems

I had a mostly-stock Nexus 7 running 4.1.1 - unlocked, rooted, TWRP installed, but no major /system changes. When the update came in, I figured "what the heck, I'll just see if it applies - worst case I lose root and my recovery console, but it's a nexus, it's easy to get those back". I applied the update, and it worked! It applied and rebooted, worked fine - but it did lose root and recovery as I expected.
So I tried to get recovery back. It won't come back. Here are the ways I tried:
Hold down VolUp+VolDown+Power to get to fastboot mode. Ran
Code:
fastboot boot recovery.img
(using a number of different copies of both clockwork and TWRP recovery). Each time, the screen went black, google logo came up, but then it booted to AndroidOS
Tried to do
Code:
fastboot flash recovery recovery.img
The flash seemed to look like it did fine, but when I selected "Boot Recovery", it didn't. It booted Android OS
I can get into STOCK recovery using the normal method of selecting it from the menu just fine.
Stock recovery doesn't have ADB running. Fastboot mode doesn't have adb running. Fastboot doesn't have any command for rebooting into recovery apart from the method I mentioned (fastboot boot recovery.img). Booting into AndroidOS reflashes the recovery console with the stock console (I tried to race it running adb reboot recovery, but lost).
I tore my hair out for hours. Nothing I tried would let me boot into a custom recovery. I eventually backed everything up as best as I could using adb (Since luckily Android OS still worked), and reflashed to stock everything. PROBLEM IS STILL HERE! Then I decide to revert the bootloader from 3.41 to 3.34. SUCCESS. 3.34 booted to recovery without any problems at all.
Any idea what the heck is going on here? Anybody else seen this? All the threads I've seen with people having problems booting into recovery end with somebody suggesting "Just get app xyz that will reboot into recovery" - but that is NOT an option if A). you cannot get it to boot or B). you are not rooted/are running stock, because you can't be in AndroidOS and still have the custom recovery flashed UNTIL you are able to get into recovery to actually fix it.
Here's a video of me trying to flash recovery, since nobody will believe me that it doesn't work. Turn off the audio, the bell noise is obnoxious, sorry.
http://www.youtube.com/watch?v=zhHWiu7pO34

I brought up the same concerns when I did a manual flash to 4.1.2 and went through a mess eventually reverting to 4.1.1, using OTA rootkeeper than updating again because on bootloader 3.41 *NO* custom recoveries successfully boot.

how do you flash the old bootloader? if you don't mind me asking.

I have been on boot loader 3.41 for a few days and no issues with twrp. I have flashed a few things since and all is good? Sorry not sure why its not working for some.

ls3c6 said:
I brought up the same concerns when I did a manual flash to 4.1.2 and went through a mess eventually reverting to 4.1.1, using OTA rootkeeper than updating again because on bootloader 3.41 *NO* custom recoveries successfully boot.
Click to expand...
Click to collapse
Huh? I have 3.41 and can go from bootloader to recovery with no problems. Even got a video of it if you don't believe me
Sent from my Galaxy Nexus

You are not alone in this issue, me too, and others more, http://forum.xda-developers.com/showthread.php?t=1932063

I update to 4.1.2 using CWM, didn't lose root. Then changed back to TWRP 2.2.2.0 with bootloader 3.41, now I just updated to TWRP 2.2.3. Everything went smooth even though I'm android noobie.

anotherxyz said:
how do you flash the old bootloader? if you don't mind me asking.
Click to expand...
Click to collapse
Code:
fastboot flash bootloader bootloader-3.34-grouper.img
(or whatever the actual filename is). Then you do:
Code:
fastboot reboot-bootloader
You should at that point see the correct version listed in fastboot
masully84 said:
Huh? I have 3.41 and can go from bootloader to recovery with no problems. Even got a video of it if you don't believe me
Click to expand...
Click to collapse
I think the issue comes from going back to stock recovery without a rooted AndroidOS. Either one by itself seems to be fine. If you still have the CWR or TWRP recovery already flashed, 3.41 can boot to that. If you have root in AndroidOS, you can always re-flash recovery from ROM Manager or something, and that will work fine. And you can boot to recovery from Android OS (so long as you have root).
If you have stock recovery and no root, your only option is fastboot. And that fastboot flash and boot commands do not work. They look like they work - but they don't. So if you already HAVE a custom recovery, it probably won't even break it.
If you really want to do a proper test / prove this, go back to stock recovery with 3.41. Turn the tablet off completely. Boot up holding the three buttons and go into recovery to see that it can go into the stock recovery console. Then reboot with the three buttons again (don't boot AndroidOS), and run the fastboot boot command to run a custom recovery. If that works, I'll eat my hat.
(well, really all that means is that the problem isn't occurring on all systems. Doesn't mean it's not happening to me and many others)
The problem might not be that 3.41 can't boot to recovery -it might just be that 3.41 can't FLASH or BOOT a recovery console through fastboot. Many people will never notice that because:
A). They already have a recovery console flashed, so it still works
B). They flash their recovery from ROM Manager, GooManager, or whatever
If you lose root, you no longer have B as an option. If you also lose your recovery console, you can't get root access back without fastboot, so you have to use fastboot.

Se7enLC said:
Code:
I think the issue comes from going back to stock recovery without a rooted AndroidOS. Either one by itself seems to be fine. If you still have the CWR or TWRP recovery already flashed, 3.41 can boot to that. If you have root in AndroidOS, you can always re-flash recovery from ROM Manager or something, and that will work fine. And you can boot to recovery from Android OS (so long as you have root)[...]
[/QUOTE]
Not sure you've got it right. At least on my N7. My first try was flashing the update.zip in another thread without updating my ROM at all. Running Paranoid Android (2.1799 then) and TWRP. Not sure when in the mix I updated TWRP though.
Thought it might have been a problem with the update.zip, so downloaded the full update.zip from google and tried installing bootloader*.img from that via fastboot.
No change. Reverted to 3.34 without any playing around with deleting files and all is good.
Click to expand...
Click to collapse

Se7enLC said:
I had a mostly-stock Nexus 7 running 4.1.1 - unlocked, rooted, TWRP installed, but no major /system changes. When the update came in, I figured "what the heck, I'll just see if it applies - worst case I lose root and my recovery console, but it's a nexus, it's easy to get those back". I applied the update, and it worked! It applied and rebooted, worked fine - but it did lose root and recovery as I expected.
So I tried to get recovery back. It won't come back. Here are the ways I tried:
Hold down VolUp+VolDown+Power to get to fastboot mode. Ran
Code:
fastboot boot recovery.img
(using a number of different copies of both clockwork and TWRP recovery). Each time, the screen went black, google logo came up, but then it booted to AndroidOS
Tried to do
Code:
fastboot flash recovery recovery.img
The flash seemed to look like it did fine, but when I selected "Boot Recovery", it didn't. It booted Android OS
I can get into STOCK recovery using the normal method of selecting it from the menu just fine.
Stock recovery doesn't have ADB running. Fastboot mode doesn't have adb running. Fastboot doesn't have any command for rebooting into recovery apart from the method I mentioned (fastboot boot recovery.img). Booting into AndroidOS reflashes the recovery console with the stock console (I tried to race it running adb reboot recovery, but lost).
I tore my hair out for hours. Nothing I tried would let me boot into a custom recovery. I eventually backed everything up as best as I could using adb (Since luckily Android OS still worked), and reflashed to stock everything. PROBLEM IS STILL HERE! Then I decide to revert the bootloader from 3.41 to 3.34. SUCCESS. 3.34 booted to recovery without any problems at all.
Any idea what the heck is going on here? Anybody else seen this? All the threads I've seen with people having problems booting into recovery end with somebody suggesting "Just get app xyz that will reboot into recovery" - but that is NOT an option if A). you cannot get it to boot or B). you are not rooted/are running stock, because you can't be in AndroidOS and still have the custom recovery flashed UNTIL you are able to get into recovery to actually fix it.
Here's a video of me trying to flash recovery, since nobody will believe me that it doesn't work. Turn off the audio, the bell noise is obnoxious, sorry.
http://www.youtube.com/watch?v=zhHWiu7pO34
Click to expand...
Click to collapse
Found the solution to the the issue (sorta), I too went through all this trouble as you did in your OP.
I did not have to do anything other then straight up flash this version "recovery-clockwork-touch-6.0.1.5.b8147-grouper.img" via fastboot and bam! recovery works. Link - http://forum.xda-developers.com/showpost.php?p=32810167&postcount=228
Problem is with previous versions of 6.0.1.0 (Official) and TWRP 2.3.1
I still prefer TWRP, but hey This is better then the alternative (No recovery at all)
Now we need to figure out what changed between CWM 6.0.1.0 and 6.0.1.5 and get the other guys (TWRP) to fix their **** for us poor saps that seem to be a minority in the Nexus 7 world having this issue.
I would love to know what actually the fix is and why only some have these issues with older versions of CWM and TWRP.

[Q] Can't flash any CWM through TWRP

I don't remember if I deleted it or what but I only have TWRP 2.6.1 on my device as a recovery and I would like to reinstall CWM on my device. However, every "flashable" CWM zip I have tried through TWRP has failed and I'm not sure why. Don't nwant to brick my device and don't necessarily want to WebOS doctor it if I can avoid it, as my device has run fairly well (I am on 4.2.2). Any/all help is appreciated. Thanks!

I'm guessing that TWRP doesn't support flashing another recovery from it. Have you tried flashing recovery image from fastboot?

bananagranola said:
I'm guessing that TWRP doesn't support flashing another recovery from it. Have you tried flashing recovery image from fastboot?
Click to expand...
Click to collapse
Not yet, although I managed to get a workable CWM running by moving an image to the boot folder and then updating to the latest working version (couldn't get the "touch" version to work via touch, however).
However, I may try flashing via fastboot if something unexpected happens. Thanks for the help

Unlocked Bootloader, Can't root? [XT1096]

Not really sure what I'm doing wrong. Last rooted phone was a Nexus 5, and that was of course painless to root and flash ROMs to...
I'm using a Verizon XT1096 with 5.1 on T-Mobile.
So I was able to get the bootloader unlocked via Motorola's website, now that Verizon is allowing them to do so. No problems there. My problem now is that I can flash a recovery, but if it reboots, the recovery is gone. And I can't get any recoveries to flash anything. I can't push an apk, root zip, or even a ROM. Says Installation Aborted, with no other error codes. Even tried CWM and disabling Signature Checking, which gives me more info, saying that the footer is mismatched. Phone does say the bootloader is unlocked though so that shouldn't be it...
Honestly, I'd just like to get it on CM12 until I can get a Nexus 6P.. Can anyone tell me if I'm doing something wrong? Or is there just no way to root yet? I figured even the XT1095 CF-Auto-Root method would work for 5.1, but no dice..
Not sure what to do here. Please move my thread if need be. Don't post here much...

I followed the instructions on the TWRP website (link below) and it worked flawlessly. One thing you have to do is, after running the "fastboot flash recovery twrp.img" command, make sure to manually scroll on the phone and reboot into recovery. Hope that helps...
https://twrp.me/devices/motorolamotox2014.html

There is a partition mismatch. So do this. Download supersu and place it in the phones memory. Boot to fastboot mode and then fastboot boot recovery.img rather than fastboot flash recovery.img. You will boot to twrp, install SuperSU then download twrp from the playstore and install thru the app. It works, that's how I did it. Also when booting to recovery from the fastboot menu choose recovery with the vol up key rather than power button.

RepeatUntilTheEnd said:
I followed the instructions on the TWRP website (link below) and it worked flawlessly. One thing you have to do is, after running the "fastboot flash recovery twrp.img" command, make sure to manually scroll on the phone and reboot into recovery. Hope that helps...
https://twrp.me/devices/motorolamotox2014.html
Click to expand...
Click to collapse
I thought I tried that but maybe not. I've read that some stock ROMs can and will overwrite the recovery upon booting, but I could be wrong. I'll look at that when I get home tonight.

oraixearl said:
There is a partition mismatch. So do this. Download supersu and place it in the phones memory. Boot to fastboot mode and then fastboot boot recovery.img rather than fastboot flash recovery.img. You will boot to twrp, install SuperSU then download twrp from the playstore and install thru the app. It works, that's how I did it. Also when booting to recovery from the fastboot menu choose recovery with the vol up key rather than power button.
Click to expand...
Click to collapse
Thank you, I'll try this tonight when I get home. This may solve it. I think I remember the bootloader spitting something out about a partition mismatch.. Will report back as soon as I try it.

So I went ahead and tried both your guys' methods.
Oraixearl, I figured your solution would work, but it actually didn't, to my surprise. It returned no results, as the root zip didn't end up doing anything.
RepeatUntilTheEnd's solution worked here. I guess I didn't try rebooting the phone after flashing the recovery, before going into it..
So here's what I did.
1.) Boot into bootloader
2.) Fastboot flash recovery [recovery.img]
3.) adb reboot bootloader
4.) Used keys on phone to go into recovery,
5.) Flashed root.zip
6.) Booted into OS, and ran root checker. Worked.
7.) To my surprise, TWRP stuck around, too.
Thank you guys!

TsarProdigy said:
So I went ahead and tried both your guys' methods.
Oraixearl, I figured your solution would work, but it actually didn't, to my surprise. It returned no results, as the root zip didn't end up doing anything.
RepeatUntilTheEnd's solution worked here. I guess I didn't try rebooting the phone after flashing the recovery, before going into it..
So here's what I did.
1.) Boot into bootloader
2.) Fastboot flash recovery [recovery.img]
3.) adb reboot bootloader
4.) Used keys on phone to go into recovery,
5.) Flashed root.zip
6.) Booted into OS, and ran root checker. Worked.
7.) To my surprise, TWRP stuck around, too.
Thank you guys!
Click to expand...
Click to collapse
Strange as it worked for me. I'm glad you got it sorted out tho. Cheers.

Flashing twrp on stock v20i

So I came from a stock lollipop Tmobile h811 non rooted
To stock MM v20i.
Ive tried flashing twrp 3.0 for cm13, and no matter what,
I get failed: (remote unknown command at the end after it sends recovery.
Its already unlocked(bootloader)
Thanks.

[email protected] said:
So I came from a stock lollipop Tmobile h811 non rooted
To stock MM v20i.
Ive tried flashing twrp 3.0 for cm13, and no matter what,
I get failed: (remote unknown command at the end after it sends recovery.
Its already unlocked(bootloader)
Thanks.
Click to expand...
Click to collapse
Type: fastboot boot (path goes here)
You can drag and drop the twrp img into the command window. This will ensure you have the correct path

[email protected] said:
So I came from a stock lollipop Tmobile h811 non rooted
To stock MM v20i.
Ive tried flashing twrp 3.0 for cm13, and no matter what,
I get failed: (remote unknown command at the end after it sends recovery.
Its already unlocked(bootloader)
Thanks.
Click to expand...
Click to collapse
Follow this instruction
http://forum.xda-developers.com/tmobile-g4/development/stock-h811-20i-images-kdz-flashable-t3308227

mingkee said:
Follow this instruction
http://forum.xda-developers.com/tmobile-g4/development/stock-h811-20i-images-kdz-flashable-t3308227
Click to expand...
Click to collapse
That link doesn't really solve the OP's issue. I have the same issue. BUT - your link did show me that I can BOOT the .img file, I can't flash the .img file. I've verified the bootloader is unlocked by the fastboot getvar command.
I'm not sure what to do next. Installing OpenGapps causes a boot loop and the only thing I can do at this point is a factory reset with the OEM recovery since in the boot loop adb is unresponsive.

joesee said:
That link doesn't really solve the OP's issue. I have the same issue. BUT - your link did show me that I can BOOT the .img file, I can't flash the .img file. I've verified the bootloader is unlocked by the fastboot getvar command.
I'm not sure what to do next. Installing OpenGapps causes a boot loop and the only thing I can do at this point is a factory reset with the OEM recovery since in the boot loop adb is unresponsive.
Click to expand...
Click to collapse
The instruction shows how to flash recovery.img with TWRP though I have no clue how to do it.

I got that error the first time I did it, it was because of a misspelling of the command.

If you already unlocked the bootloader, while in fastboot, you only type "fastboot boot" + "path to twrp img on computer" OR instead of typing out the path, you may drag and drop the file into the command window.
Once it boots to twrp, flash twrp from within the booted img. That ensures you have permanent twrp.
If you were able to unlock your bootloader, the only thing stopping you from loading twrp is improper spelling and path to the img. Almost every error I have seen is from not following the directions.

Vseprz said:
If you already unlocked the bootloader, while in fastboot, you only type "fastboot boot" + "path to twrp img on computer" OR instead of typing out the path, you may drag and drop the file into the command window.
Once it boots to twrp, flash twrp from within the booted img. That ensures you have permanent twrp.
If you were able to unlock your bootloader, the only thing stopping you from loading twrp is improper spelling and path to the img. Almost every error I have seen is from not following the directions.
Click to expand...
Click to collapse
OK, just so I understand correctly, the proper sequence of events is to use fastboot to boot TWRP (which I can do) then, once in TWRP, I can then flash the twrp .zip file, right? Does anyone know if the LG's bootloader overwrites the recovery partition upon boot (in other words, do I have to boot straight to recovery after I flash to ensure it sticks?)
Sorry for the obtuse questions, I've got a lot of experience with Samsung flashing back in the KK and LP days, but not MM.
Thanks in advance!!

joesee said:
OK, just so I understand correctly, the proper sequence of events is to use fastboot to boot TWRP (which I can do) then, once in TWRP, I can then flash the twrp .zip file, right? Does anyone know if the LG's bootloader overwrites the recovery partition upon boot (in other words, do I have to boot straight to recovery after I flash to ensure it sticks?)
Sorry for the obtuse questions, I've got a lot of experience with Samsung flashing back in the KK and LP days, but not MM.
Thanks in advance!!
Click to expand...
Click to collapse
So you have flashed 20i which overwrites twrp with the stock recovery.
You then go through the steps for unlocking the boot loader.
After the boot loader is unlocked, you may boot into twrp with the fastboot boot command.
When that boots into twrp, flash twrp from within that to have it stick.

Have a question and maybe someone can help. Me getting carried away installed twrp from external partition. Now i cannot boot into recovery. Tried flashing using flashify and twrp manager. but flashify does not install after reboot and there is no option for h811 in twrp manager. Anyway to fix this?
Sent from my LG-H811 using Tapatalk

Vseprz said:
So you have flashed 20i which overwrites twrp with the stock recovery.
You then go through the steps for unlocking the boot loader.
After the boot loader is unlocked, you may boot into twrp with the fastboot boot command.
When that boots into twrp, flash twrp from within that to have it stick.
Click to expand...
Click to collapse
Yes, that's exactly the steps I do. I've flashed 20i. I used fastboot to boot into twrp. I then "install" the twrp zip file. Says it flashes with no issues. I then reboot the phone. Still has stock recovery.
I've confirmed my bootloader is unlocked with the fastboot getvar all. I've also tried all three versions of twrp available (.1, .2 and .3) and still doesn't work. Yet twrp works fine if I boot it.

joesee said:
Yes, that's exactly the steps I do. I've flashed 20i. I used fastboot to boot into twrp. I then "install" the twrp zip file. Says it flashes with no issues. I then reboot the phone. Still has stock recovery.
I've confirmed my bootloader is unlocked with the fastboot getvar all. I've also tried all three versions of twrp available (.1, .2 and .3) and still doesn't work. Yet twrp works fine if I boot it.
Click to expand...
Click to collapse
How did you confirm you have stock recovery? Did you use adb reboot recovery? Or did you use hardware keys to boot to it? Because if you use hardware keys you still get the initial confirm factory reset. You just have to accept then it boots to twrp.
---------- Post added at 10:44 AM ---------- Previous post was at 10:22 AM ----------
99problemz said:
Have a question and maybe someone can help. Me getting carried away installed twrp from external partition. Now i cannot boot into recovery. Tried flashing using flashify and twrp manager. but flashify does not install after reboot and there is no option for h811 in twrp manager. Anyway to fix this?
Sent from my LG-H811 using Tapatalk
Click to expand...
Click to collapse
If boot loader is unlocked you should load twrp from fastboot.

Vseprz said:
How did you confirm you have stock recovery? Did you use adb reboot recovery? Or did you use hardware keys to boot to it? Because if you use hardware keys you still get the initial confirm factory reset. You just have to accept then it boots to twrp.
---------- Post added at 10:44 AM ---------- Previous post was at 10:22 AM ----------
If boot loader is unlocked you should load twrp from fastboot.
Click to expand...
Click to collapse
Hahaha now that's funny!! I bet I've been through 50 blog posts on various sites to try to figure this out. Having successfully installed Viper I didn't want to take the chance and pass that confirm wipe factory question.
I feel like a complete tool. Seriously, thank you for taking the time to respond to me!

joesee said:
Hahaha now that's funny!! I bet I've been through 50 blog posts on various sites to try to figure this out. Having successfully installed Viper I didn't want to take the chance and pass that confirm wipe factory question.
I feel like a complete tool. Seriously, thank you for taking the time to respond to me!
Click to expand...
Click to collapse
I'm glad it all worked out! :good:

finding I have to re-flash with flashify each time
using twrp-2.8.7.1, I get only the first reboot from there with hardware keys letting me into twrp after accepting the first factory reset prompt and denying the second. After that cant do it again unless I re-flash. Same thing happens if I flash it from within twrp. Can use terminal, su, boot recovery and I am in., or ADB/fatsboot Primarily worried about a soft brick condition. H-811, v1 20i stock, unlocked bootloader and rooted. DE-bloated,
Any Ideas, Thanks

jdoebean said:
using twrp-2.8.7.1, I get only the first reboot from there with hardware keys letting me into twrp after accepting the first factory reset prompt and denying the second. After that cant do it again unless I re-flash. Same thing happens if I flash it from within twrp. Can use terminal, su, boot recovery and I am in., or ADB/fatsboot Primarily worried about a soft brick condition. H-811, v1 20i stock, unlocked bootloader and rooted. DE-bloated,
Any Ideas, Thanks
Click to expand...
Click to collapse
You drop the twrp file
In fastboot folder open command prompt and flash twrp first just rename it simply to recovery.img while in the fastboot folder
Type fastboot flash recovery recovery.img
Or just fastboot flash recovery.img
Then it should boot you into twrp
Once booting into twrp flash the supersu zip in your internal sd
Once you have root and reboot all you have to do is use flashify app and download twrp from the app and flash it Twrp sticks from there.
Sent from my LGMS631 using XDA Free mobile app

I don't want the OTA, I just want to boot my phone

I accidentally downloaded the OTA. Now it boots into TWRP (3.02) and stops. I can flash a ROM and I can restore a backup but it still boots to TWRP.
Any way to load some system without having to flash stock?

Yeah you can download the stock image, extract it, and "fastboot flash system system.img"

fakecharles said:
I accidentally downloaded the OTA. Now it boots into TWRP (3.02) and stops. I can flash a ROM and I can restore a backup but it still boots to TWRP.
Any way to load some system without having to flash stock?
Click to expand...
Click to collapse
It would be good to know if your problem is resolved - it would save me the effort of typing this, for a start.
The simplest way is to download the OTA to your PC and sideload it. If you're already in TWRP there is a button which allows you to sideload via ADB.
Edit: Sorry, I see you say "not stock". Downloading the OTA doesn't do anything - I guess that you tried to install it? Which ROM were you on before you did this? And you know that there's a newer TWRP - 3.1?

I did resolve it. I found some instruction I could tie in the terminal. Sorry, I don't have a link.