Hello, I was trying to install the 5.0 lollipop Andriod version on my phone Lenovo A7000, I did all the steps as needed such as:
1. Turn off Firewall and Antivirus
2. Debbuging USB
3. Followed the instructions as if needed
After once I've done the scatter-loading and turned off the phone completely, I connected the USB cable on to my laptop and after that it started searching for a driver that I downloaded and installed it earlier today like 5 minutes and still searches and it doesn't recognize it at all, my operating system at this time is Windows 7 64bit Professional, all I need is a solution about the driver issue, Thank you for you time!
Did you try the vcom drivers?
Download VCOM drivers from here, extract, go to Win7 folder, right click the .inf file according to your OS (32 or 64 bits) and click install. Even if windows pops a warning, continue with the installation. Now try to flash again, it should work.
Related
Am trying to unlock my n1 so I can get to install cyanogen rom but am stuck after installing Android sdk and Usb drivers, am following some steps but am stuck trying to locate the USB driver, this is part of what was stated in the direction (You can check if your Android USB drivers are installed by going to “Printers & Devices” on Windows 7.* (and I think you can check Device Manager for other versions of Windows). I check the device manager on my pc and still didn't locate it,anybody have an idea like where I can find the USB drivers.
this has been discussed 100 times and is also in the "informative links" sticky.
Please do a search. The driver comes with the SDK.
I have the hardest time getting my computer to use the right driver for ADB. When I setup my wife's phone on a vista-64 operating system I first connected with USB enabled and it took me a week of trial-and-error to get the system to use the ADB driver (I don't know the steps that made it work - but it involved several attempts at uninstalling every USB device).
I just got another G1 for a Windows-7 laptop (64-bit) and I did the same thing (hooked up with the USB driver) and I fear another week of trial and error. I know that if I knew what I was doing I could do it in 10-minutes.
Can someone please provide the step-by-step instructions for having it use the ADB driver once it has already found, and is happy with, the regular USB driver? I'm not even sure how to tell which of my multiple installed USB [devices] is for the phone.
Step 1. Install a linux distribution.
cloverdale said:
Step 1. Install a linux distribution.
Click to expand...
Click to collapse
Step 2. Download the SDK and put it in a directory (I use "Android")
install the sdk from http://developer.android.com/sdk/download.html?v=android-sdk_r05-windows.zip
let it update (make sure that usb drivers are selected for download)
plug your phone in
if the drivers aren't automatically installed, point it to the drivers directory (<sdk>\usb_driver)
if your sdk is already installed, just download the drivers using the steps described here http://developer.android.com/sdk/win-usb.html
4.) Give me a huuuuuug!
Team,
For those of you having trouble finding drivers here are some links.
64bit:
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x64.shtml
32bit:
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x86.shtml
For Linux and Mac the Android SDK drivers should work fine.
The standard Samsung USB driver that PDAnet had listed for the Samsung Moment worked for me as well, will give these new ones a try on my other system.
thank you
I added a link to this thread in the sticky
EDIT: Nevermind the n00b question. I was able to get the drivers installed and I am good to go.
cant get my cpu to recognize my phone after installing drivers... im on windows 7 64 bit any ideas??
skater4690 said:
cant get my cpu to recognize my phone after installing drivers... im on windows 7 64 bit any ideas??
Click to expand...
Click to collapse
have the same problem. i'm on 7, 32bit
did you enable USB debugging?
Gunnman from Galaxy S
yes of course. first thing I did after I rooted
I'm drunk so bear with me. go into device manager and browse for the driver manually ,include subdir. point to programfiles\samsung.
if that don't work use the 64bit drivers on 32bit windows. don't run setup just browse to the extracted dir from the unknown device in device manager. it worked for me at work. good night
Gunnman from Galaxy S
since i had issues w/ the 32bit driver exe, i extracted it and zipped it up incase others have the same issue.
http://rapidshare.com/files/408470448/Samsung_Usb_Drivers_x32.zip
this thread should be stickied since W7 doesn't come with the drivers, it seems.
How exactly do you update the drivers with win7? It keeps saying my drivers are up to date but I still can't get adb to recognize my vibrant
Beast84 said:
How exactly do you update the drivers with win7? It keeps saying my drivers are up to date but I still can't get adb to recognize my vibrant
Click to expand...
Click to collapse
Anyone?? I can't get get adb to recognize my device for the life of me
Try both 32bit and 64 bit drivers. At work I have 32bit win7 and the 64bit drivers fixed it up. Dont run setup just go through device manager chosse the unknown device and point it to the 64bit driver directory and check include sundirs.
Try using correct drivers for your win version but turn the phone off, connect and then power up while connected....worked fine for me after messing with both lots of drivers first and no luck
Make sure you select "USB debugging" for ADB to work folks.
Where can I get the mac driver..i looked everywhere please help
this thread is legit!
thanks for all of your help so far guys.. BUT i still cannot get my laptop to sync up with the phone properly (win xp pro, sp3)...
I've downloaded and installed both drivers and the computer is recognizing the external drives, but they are showing as removable disks E: and F:. when i double click to open, it is telling me to insert a disk? i feel like i'm almost there, but there is somethign i'm missing!
usb is mounted and usb storage is off. usb debugging enabled.
any help would be appreciated.
Windows drivers issue
Have you tried mounting the drives. Same thing happened to me when you have it connected to the computer drop down the usb notification and mount. The your drives should be accessible.
Hi there,
I`ve got the following Problem:
My One is not detected properly in fastboot mode, adb works like a charm (all cmds working)
In fastboot mode windows says that the device cannot be started (code 10) and cmd cannot find the device and it`s also not charging in fastboot...
I`m using Windows 8 and I know that there are problems with driver signatures, so I disabled the checks through advanced boot, uninstalled all drivers and reinstalled them (the strange thing is, it worked like a charm with my HOX)
After that still the same issues... Then I uninnstalled the HTC drivers and tried the drivers from Google SDK and after that the drivers from PDAnet but nothing helped...
Then I read that there are Problems with USB3.0 and fastboot but I only got USB3.0. So I tried different USB ports and reconnected many times (about 30 times) and maybe the phone says "fastboot USB" but in cmd it`s still not detected...
As I said before with my HOX it worked like a charm... (also Win8 and USB3.0)
Any ideas?
Thanks for your help!
togx
Try disabling Fastboot in the Power Settings.
I tried it again with fastboot disabled but it still doesn`t work... :/
same problem here....
envoy_467 said:
same problem here....
Click to expand...
Click to collapse
hey envoy_467,
I found a solution for this issue:
It seems that microsoft´s own driver for the Intel USB3.0-Host breaks the support for several devices. You can install the Intel drivers for Win7 on Win8 (search google: Windows 8 and Intel USB3.0 host controller there should be a link to plugable. I´m not able to post links cause I don´t have enough posts...) but it only works with the Intel host.
Hope it will help you too!
greetz,
togx
usb device not recognized
I'm having a similar problem using windows 8, but I tried both my usb 2.0 and 3.0 ports but results in same problem. I have a t-mobile HTC One S (JB 4.1.1). Everytime I try to do the fastboot to get my token id my pc tells me my usb device is not recognized. Does anyone have any suggestions? Thanks in advance!
Try THIS
Sorry to bump this thread, but it's better than creating a new one.
Anyway, I have the same issue as the others here: fastboot won't work at all.
Btw, I've tried all possible solutions but installing the intel driver isn't possible due to a limitation on Windows + Intel 8 Series.
Windows 8, Intel 4th generation processor (8 Series/220) on a Gigabyte GA-Z87N-WIFI.
USB eXtensible Host Controller driver by Microsoft can't be modified to work with the Intel 8 Series driver. When trying to install it it says that my PC doesn't have the requirements to install the program (driver can be found here -- 8 Series ONLY!!) probably because I'm on Windows 8 (no, setting the app to run with Win7 compatibility mode doesn't work either).
Using Naked Driver 0.72..
Has anyone tried with a virtual machine? Maybe I could install Ubuntu on a VM to test it when I get the time.
Any other ideas?
VM doesn't work.. Since Windows won't recognize the phone while on fastboot that means that the VM Linux won't find the devide either.
LiveUSB won't install the android SDK either.. I'm stuck..
FIXED, kinda.. Workaround on Linux.
More info:
Just did it..
But not on Windows..
I've created a LiveUSB from Ubuntu 12.04 using the "Universal USB Installer" from: http://www.pendrivelinux.com/downloads/
When creating the LiveUSB I've created with 4gb (4096mb) of free space on a 16gb flash drive just in case, but you can make it work with a 4gb flash drive.
Then I installed the Android SDK.
Then I was able to use fastboot to change the CID to 11111111.. Working great.. Now let's download the developer ruu..
Tutorial used to install the SDK: http://askubuntu.com/questions/318246/complete-installation-guide-for-android-sdk-on-ubuntu
To run all commands faster, just type "sudo su" before starting. After that type "apt-get -f install" to clean everything.
Remember: To install anything the tutorial asks you have to use the command "apt-get install name-of-package", where the name is the item the tutorial says.
Go up to Step 4.
Download and Unzip/extract the AndroidSDK to the desktop (just the SDK, you don't need the full bundle).
Go to the unzipped folder, go to the Tools folder, double click "android", run in terminal, install the SDK and the TOOLS.
When finished, open a terminal window, navigate to your unzipped folder, than navigate to platform-tools and use the command "./adb" and "./fastboot" to work your magic..
Edit: Still not able to install the RUU..
At least now I have the phone ready.. Just have to find a new PC to install the RUU..
I just upgraded my computer with Windows 10. Everything seemed to work fine with upgrading but when I put my phone into fastboot,the prompt doesn't detect my device anymore (like it did with Windows 7)
Used :
http://forum.xda-developers.com/showthread.php?t=2588979
this...
http://developer.sonymobile.com/downloads/drivers/xperia-z1-c6902-c6903-c6906-c6943-driver/
and the Google USB driver from SDK tools but my PC still can't find my phone.
Flashing kernels won't help either.
Looked online but I can't seem to find an answer...any ideas to fix this?
you probably need to reinstall the drivers, you can use Flashtool-drivers.exe found in the flashtool/drivers folder.
but you also need to probably disable driver signature enforcement to install it, instructions can be found here:
http://answers.microsoft.com/en-us/...ment-win/a53ec7ca-bdd3-4f39-a3af-3bd92336d248