Database Develop

Exposed framework

Does anybody use an exposed framework on P7-L10?

kriticar said:
Does anybody use an exposed framework on P7-L10?
Click to expand...
Click to collapse
I don't think it matters which variant of the P7 you have. I recently tried a custom ROM by Lishuo which is based on B124 for the L07. Even Xposed 2.5 wouldn't install. I have no problem with my current ROM although I can't upgrade Xposed beyond V2.5. I suspect the earlier builds of the P7 stock ROMs are compatible (up to a point) with Xposed, but the later builds are not.

I'm on stock rom and I use Xposed version 2.5
Some module works, but most of them don't, which is sad. I mainly use it for gravity box which work at 85% I would say.

Stock B126 with Exposed 2.6.1
But using only for XPrivacy.

u.hedt said:
Stock B126 with Exposed 2.6.1
But using only for XPrivacy.
Click to expand...
Click to collapse
The problem is not the version of Xposed, the thing is you could be using the latest 2.7 version but it doesn't work on our devices for any "theming" thing. I guess it would work for XPrivacy but not if you want to use, lets say, GravityBox to theme the navbar.

I've had Xposed for some time, used it for Snapchat modules, and it worked fine. I installed GravityBox [KK] today and for some reason whenever I try to open it I get "GravityBox system framework not responding. Exiting."
Is it because I don't have theme engine disabled or is it something else?

sarcastical said:
I've had Xposed for some time, used it for Snapchat modules, and it worked fine. I installed GravityBox [KK] today and for some reason whenever I try to open it I get "GravityBox system framework not responding. Exiting."
Is it because I don't have theme engine disabled or is it something else?
Click to expand...
Click to collapse
I had it when I was using Xposed 2.6 or higher or when I didn't reboot my phone after instaling it (which is dumb ... I just forgot xD)
I'm now on 2.5.1 and I didn't touch disable nor enabled theme engine, I left it as it was when I installed Xposed 2.5.1

PrimuSSaintS said:
I had it when I was using Xposed 2.6 or higher or when I didn't reboot my phone after instaling it (which is dumb ... I just forgot xD)
I'm now on 2.5.1 and I didn't touch disable nor enabled theme engine, I left it as it was when I installed Xposed 2.5.1
Click to expand...
Click to collapse
So I just need 2.5.1?

sarcastical said:
So I just need 2.5.1?
Click to expand...
Click to collapse
As far as I know, yes it should work

I just rooted my P7 and try instaling latest xposed. I have this error and framework is not instaling.
Should I install custom recovery too ?
Huawei Ascend P7-10 by Tapatalk2

Ziółek said:
I just rooted my P7 and try instaling latest xposed. I have this error and framework is not instaling.
Should I install custom recovery too ?
Huawei Ascend P7-10 by Tapatalk2
Click to expand...
Click to collapse
Just follow the steps that are given here :
http://forum.xda-developers.com/showpost.php?p=53291974&postcount=200&nocache=1&z=1143765179790447
be aware that by instaling the latest Xposed version you might not use all the tweaks availables

PrimuSSaintS said:
...be aware that by instaling the latest Xposed version you might not use all the tweaks availables
Click to expand...
Click to collapse
Hi,
Which version of Xposed do You recommend to reduce this limitations ?
EDIT:
I tested Xposed versions: 2.6 and 2.4.1 and 2.5
In ver. 2.6 You have to check on "Disable resources hook" option in settings. Another way Xposed don't start and inform about incompatibility with our devices . But with this option many module are blocking and dont work.
In ver. 2.4.1 and 2.5 There isn't this this restriction and Xposed starting normally and some module (blocked in ver 2.6) work properly but many also don't work.
In addition, this version changes the icons in the home screen theme. :thumbdown:
In any way on rom (B135) I can't use GravityBox module (irrelevant Xposed version). GravityBox interface don't even launch
And last problem. So, I didn't make backup set_immutable.list file o) . Somebody can help me and upload this file ?

Ziółek said:
In any way on rom (B135) I can't use GravityBox module (irrelevant Xposed version). GravityBox interface don't even launch
And last problem. So, I didn't make backup set_immutable.list file o) . Somebody can help me and upload this file ?
Click to expand...
Click to collapse
I can only speak about the B121-126 which were the two version I used. On both, gravitybox was working perfectly with Xposed 2.5.1 (when I say perfectly, I mean about 85% of the tweaks were working)

Hey, I still have a problem with GravityBox (KK).
I am trying to use this module in the second ROM (B135 and now B136) but always have the same issue when trying to launch (see screenshot).
Any suggestions ? Did someone similar problem ?
Xposed ver 2.5.1
Sent from my HUAWEI P7-L10

Xposed Modules Desactivator

Hi everybody
Here is my
XPOSED MODULES DESACTIVATOR
If like me you have installed an incompatible Xposed Module causing bootloop
or FC from any system application making it unusable phone (eg CF SystemUI for example),
this is my patch to recover a functional phone !!!
Xposed Modules Desactivator
How to
Copy Xposed Modules Desactivator's zip to the root of your internal card or external card
Flash zip via a Custom Recovery like Philz, TWRP, CWM ... this will disable all modules
Then uninstall incompatible module
Recheck all other modules in the Xposed Installer application to reactivate
Reboot.
Xposed Modules Desactivator to keep safe on its internal or external card,
it will save your life in case of incompatible modules
Enjoy [emoji6] ​

Awesome

Im not Xposed user's but its a nice job u did it here , congrats ,, simply its useful & very very useful for Xposed users ...

Perfect

thereassaad said:
Im not Xposed user's but its a nice job u did it here , congrats ,, simply its useful & very very useful for Xposed users ...
Click to expand...
Click to collapse
Me too, very long time i dont use xposed[emoji4]

Hi! What's the difference with regular xposed disabler zip?
Inviato dal mio SM-G935F utilizzando Tapatalk

Many Thanks everybody
I had this idea one day i install an incompatible module causing a bootloop to find how to disable.
Very usefull if you don't have any Backup to restore...

Wuby986 said:
Hi! What's the difference with regular xposed disabler zip?
Inviato dal mio SM-G935F utilizzando Tapatalk
Click to expand...
Click to collapse
Regular Xposed its uninstall Xposed framework but with this one its only disabled the Xposed module , edzamber correct me if im understanding wrong ?

thereassaad said:
Regular Xposed its uninstall Xposed framework but with this one its only disabled the Xposed module , edzamber correct me if im understanding wrong ?
Click to expand...
Click to collapse
Exactly [emoji6]

@edzamber
Excellent job with this deactivation zip:good: and a great idea for the Xposed users.

Nice job. Whilst I don't use Xposed myself, I can see it being really useful for those that do.

I appreciate your engagement but afaik you only have to push any hardware button (volume up for example) a few times on boot and xposed is disabled (puts a disabled file in its directory).
So there should be no need for a flashable zip.

Great work @edzamber.
Please tap the thanks button if I helped you. ?

2phazt said:
I appreciate your engagement but afaik you only have to push any hardware button (volume up for example) a few times on boot and xposed is disabled (puts a disabled file in its directory).
So there should be no need for a flashable zip.
Click to expand...
Click to collapse
Really ?
What version of Xposed do you use and witch is your Phone model ?
Because add .disabled file into data/de.robv.android.xposed.installer/conf doesn't working anymore with Xposed Framework up to v71... (since core-libart.jar modded isn't needed)
Just tested volume up few times since boot and any other hardware Keys doesn't disable Xposed on Samsung Galaxy S6 Edge device...

edzamber said:
Really ?
What version of Xposed do you use and witch is your Phone model ?
Because add .disabled file into data/de.robv.android.xposed.installer/conf doesn't working anymore with Xposed Framework up to v71... (since core-libart.jar modded isn't needed)
Just tested volume up few times since boot and any other hardware Keys doesn't disable Xposed on Samsung Galaxy S6 Edge device...
Click to expand...
Click to collapse
Well, I know that it worked, because I used it one time on my s3 - don't know which xposed version it was.
I think 80 or so.
Now I'm not as convinced as I was before and so your efforts might be more useful than I thought ??

2phazt said:
Well, I know that it worked, because I used it one time on my s3 - don't know which xposed version it was.
I think 80 or so.
Now I'm not as convinced as I was before and so your efforts might be more useful than I thought ??
Click to expand...
Click to collapse
Maybe it depend of device...

I have been using this flashable zip to deactivate xposed modules for months now and damn right it's handy especially if you were messing about with incompatible modules .
Sent from my SM-G925F using Tapatalk

This is awesome and I never knew I needed it. No more nandroid shuffling, yay.

Anyone using xposed on the galaxy s7 edge? I have it installed and my phone gets very hot any time I pick it up to use. It goes back to normal after Uninstalling
Sent from my SM-G935F using Tapatalk

Very useful on my F240K . Great work
Sent from my LG-F240K using Tapatalk

Best Xposed Moduls for Z5

Hello Guys,
i want to know wich xposed moduls do you use on stock z5.
At the moment i use Android N-ify and Gravity Box MM.
Please Post it like:
Module:
Android Version
Maybe Screenshot
Thanks

I use a lot of modules

i use these modules

Hi guys. I am currently on 6.0.1, stock rom with stock kernel and flashed tobias drm fix.
Got root and TWRP and flashed xposed framework.
But it says SDK23 Is not supported.
Hw to get it work on 6.0.1
Which version of android u guyz using?
Thank u.

agentsandy007 said:
Hi guys. I am currently on 6.0.1, stock rom with stock kernel and flashed tobias drm fix.
Got root and TWRP and flashed xposed framework.
But it says SDK23 Is not supported.
Hw to get it work on 6.0.1
Which version of android u guyz using?
Thank u.
Click to expand...
Click to collapse
Xposed beta v85 supports android m but crashes sometimes
Sent from my Xperia Z5 using XDA Labs

egemaster said:
Xposed beta v85 supports android m but crashes sometimes
Click to expand...
Click to collapse
I did try v85 but no luck.

I'm using 85.7 systemless for about 2 weeks, no problems so far

Отправлено с моего E5823 через Tapatalk
P.S. Comrades, is there any analog of Ambient display? I`m on Xpower 3.0(deodexed ROM for Z5C). I have tried module - Enable Ambient Display - Xposed, but no luck so far. Any solutions?

xposed v86 is out now

Phazonclash said:
View attachment 3811782
View attachment 3811783
Click to expand...
Click to collapse
I see that u are using Android N ify.
Is that working for you?
I've tried it on stock rom 224, it doesnt work.
And what Rom are u using?

since .253 update Xposed is causing random reboots for me , even with systemless xposed v86.1

List of modules I use:
APM+
Enable Ambient Display Xposed
GravityBox
MinMinGuard
Youtube Background Playback
Fingerprint Enabler
Firmware .253 with Xposed v86

I am using
Gravity Box
Hide Emergency Buttton
XQS Background (working wonderfully)
Settings Editor is also great but only if you buy it.

kadimatik said:
I use a lot of modules
Click to expand...
Click to collapse
great
thanks

rtimoff said:
Отправлено с моего E5823 через Tapatalk
P.S. Comrades, is there any analog of Ambient display? I`m on Xpower 3.0(deodexed ROM for Z5C). I have tried module - Enable Ambient Display - Xposed, but no luck so far. Any solutions?
Click to expand...
Click to collapse
@rtimoff Ambient Display needs AMOLED displays, no ?
Since the Z5 series uses LCD displays it will NOT work
edit:
well, it could be emulated with Tasker or Secure Settings:
http://www.androidauthority.com/battery-life-ambient-display-notifications-689638/
and Gravity Screen

I use Xposed v86 and no issues on my Z5.
This are my modules.
Some i dont use at the moment so disabled it.

Pandemic said:
I use Xposed v86 and no issues on my Z5.
This are my modules.
Some i dont use at the moment so disabled it.
Click to expand...
Click to collapse
Can't find the modules of Xperia home and blurred system ui mm
Sent from my E6633 using XDA-Developers mobile app

Ahyricks said:
Can't find the modules of Xperia home and blurred system ui mm
Sent from my E6633 using XDA-Developers mobile app
Click to expand...
Click to collapse
Check the profile of my bro @serajr
Do something by yourself like searching

Module working with unofficial Xposed but not with official Xposed ?

Before Xposed for nougat was official I used the unofficial Xposed by purifyos and had the module "enable ambient display"
it works very fine with the xposed of purifyos but not with the official Xposed. is It possible to fix this ?
I rebooted a few times and also installed the module again and I'm sure that it dont works with the official Xposed.

Same is happening with amplify.
Gesendet von meinem Moto G 2014 LTE mit Tapatalk

You can also add "UNICON".
It's was fully working with the experimental version but partially with the official.
By partially I mean that the already applied icon theme stood, but whenever I open unicon it asks you to activate it even if it's already activated.

All my modules aren't working with Xposed 7.0 SDK 24 v88 right now. I did a clean install and modules like Amplify and Greenify, etc aren't working but Xposed Installer says the framework is running. Anyone else experiencing the same?

chibichuba said:
All my modules aren't working with Xposed 7.0 SDK 24 v88 right now. I did a clean install and modules like Amplify and Greenify, etc aren't working but Xposed Installer says the framework is running. Anyone else experiencing the same?
Click to expand...
Click to collapse
same isue with Greenify. It won't work with both official and unofficial

Probably its bug from module itself, dev need to make compability to xposed Nougat official

exodius48 said:
Probably its bug from module itself, dev need to make compability to xposed Nougat official
Click to expand...
Click to collapse
Sadly, that won't happen with Unicon. I was so jazzed to have it working on Nougat but now back to not working.
Word has it Greenify 3.7.1 via apkmirror works on official Xposed.
ZTE Axon 7 A2017U, Dark ROM, Tapatalk 4.9.5

The problem lies with the unofficial Xposed.
It generally makes a mess out of your ART cache and even after you uninstall it the cache is left corrupted.
You need to clear your ART cache (from TWRP or FlashFire) before installing the official Xposed.

Xspeed said:
The problem lies with the unofficial Xposed.
It generally makes a mess out of your ART cache and even after you uninstall it the cache is left corrupted.
You need to clear your ART cache (from TWRP or FlashFire) before installing the official Xposed.
Click to expand...
Click to collapse
Did that - no success.
Gesendet von meinem Moto G 2014 LTE mit Tapatalk

chibichuba said:
All my modules aren't working with Xposed 7.0 SDK 24 v88 right now. I did a clean install and modules like Amplify and Greenify, etc aren't working but Xposed Installer says the framework is running. Anyone else experiencing the same?
Click to expand...
Click to collapse
slimli said:
same isue with Greenify. It won't work with both official and unofficial
Click to expand...
Click to collapse
Try v3.7.1, it seems to work.
Edit : it works.

lahceneamine said:
Try v3.7.1, it seems to work.
Edit : it works.
Click to expand...
Click to collapse
But where to download v3.7.1

slimli said:
But where to download v3.7.1
Click to expand...
Click to collapse
It you have just tipped "Greenify 3.7.1" on Google, you would have found it as the first result :
https://www.apkmirror.com/apk/oasis...-release/greenify-3-7-1-android-apk-download/

Same problem with "enable ambient display"
Enviado desde mi SM-G930F mediante Tapatalk

@ Everyone :
Try this version here made by ahrion.
It made unicon work, then it may get some other modules work too !
---------- Post added at 02:05 ---------- Previous post was at 02:03 ----------
marcdw said:
Sadly, that won't happen with Unicon. I was so jazzed to have it working on Nougat but now back to not working.
Word has it Greenify 3.7.1 via apkmirror works on official Xposed.
ZTE Axon 7 A2017U, Dark ROM, Tapatalk 4.9.5
Click to expand...
Click to collapse
Read my previous post, You're gonna be happy

lahceneamine said:
Read my previous post, You're gonna be happy
Click to expand...
Click to collapse
You referring to the ahrion link? Yeah I just saw your post in another thread. Directory is empty now but I'll check back in a day or two.
In the meantime I was messing around a bit. Reading things here and there it seems the installer used makes a difference.
My Xposed testing has mostly centered around GravityBox and Unicon. Both worked on Xposed by PurifyOS using @DVDandroid's installer.
After official Xposed came out (and moved to another ROM) I tried again with the recommended official installer.
GB works. Unicon does not. I assumed it didn't work because of Xposed v88.x but...
Disabled modules and rebooted.
Uninstalled 3.1.2 installer and rebooted for good measure. Made sure no cruft was left over.
Installed DVDandroid's installer and activated GB and Unicon.
GB does not work. Unicon works.
Reverting back to official installer, I get the flipside again.
At least that proved to me it isn't the framework that's the main issue.
I await something from ahrion or the next Material Design installer.
LG G3 D851, LiquidSmooth v4.1 ROM, MultiROM, Tapatalk 4.9.5

marcdw said:
You referring to the ahrion link
Click to expand...
Click to collapse
I've spoken with rovo and wanam, they explained to me the main difference with the installers:
- Previous installers (like dvdandroid) put the "enabled module list" into data/data/appid.
- Actual installer (3.1.2) put it in data/user_de/appid.
As unicon has hard coded path, it checks if it's installed in the first folder, that's why it detecte it's activation status with dvdandroid's installer and not with the official one.
Vice Versa with gravity box, cause it has been updated to check into the new folder.

Thanks for that.
I had actually checked those locations previously.
In my desktop days I would've symlinked an expected location to the new one. Here I'll just wait it out and see what happens.
Would be nice if the Unicon dev were to get back in the game, especially since the module still works in general.
ZTE Axon 7 A2017U, Dark ROM, Tapatalk 4.9.5

marcdw said:
Thanks for that.
I had actually checked those locations previously.
In my desktop days I would've symlinked an expected location to the new one. Here I'll just wait it out and see what happens.
Would be nice if the Unicon dev were to get back in the game, especially since the module still works in general.
ZTE Axon 7 A2017U, Dark ROM, Tapatalk 4.9.5
Click to expand...
Click to collapse
I would love to see that too, but it's a kind of utopia.
Then, after deep thought, I told myself why wouldn't we ask another dev (especially launchers devs) to create a module like unicon since they already do icon theming through their launchers. They only need to add the "system wide" thing.

Xposed for Android Pie [+Modules Test]

Old: not maintained anymore
Hi everybody
i want to share that i was able to instal xposed on OOS 9.0.3 with android 9 pie
and am testing now what modules are working and not
i got it from the link here:
https://github.com/ElderDrivers/EdXposed/releases/
please if you install it share with me what modules are working with you
try it at your own risk, am not responsible for any brick
UPDATE: installed Edxposed 0.2.9.8 and EdXposed installer, thing are smoother now
for me it looks like these modules are
Working
- MinMinGuard
- Youtube Background Playback 2.0.5
- Youtube Adaway
- Xposed Edge
Not Working
- Statusbar Download Progress
- Download redirection (makes xposed installer not detecting that xposed is installed - so destroys all xposed functionality)

Complete list of working/not working modules here https://forum.xda-developers.com/xposed/list-xposed-modules-android-pie-ed-t3892768

When I install xposed installer, it bootloops...

Kellwa said:
Hi everybody
i want to share that i was able to instal xposed on OOS 9.0.3 with android 9 pie
and am testing now what modules are working and not
i got it from the link here:
https://www.xda-developers.com/xposed-framework-unofficial-port-android-pie/
please if you install it share with me what modules are working with you
try it at your own risk, am not responsible for any brick
for me it looks like these modules are
Working
MinMinGuard
Youtube Background Playback 2.0.5
Youtube Adaway
Not Working
Statusbar Download Progress
Xposed Edge (bootloop)
Click to expand...
Click to collapse
It doesn't work me, it bootloops, maybe because i have substratum installed?

HC4Life said:
It doesn't work me, it bootloops, maybe because i have substratum installed?
Click to expand...
Click to collapse
me too i have substratum installed and they are working together
but to be more sure try to install it directly after a clean system before any other magisk module or any other system tweaks

YassGo said:
When I install xposed installer, it bootloops...
Click to expand...
Click to collapse
is it the xposed installer mentioned in the other thread , its modified one to read magisk xposed
for me no bootloop

Kellwa said:
me too i have substratum installed and they are working together
but to be more sure try to install it directly after a clean system before any other magisk module or any other system tweaks
Click to expand...
Click to collapse
It works fine now.
Thx!

can you test oxygen slider? i was using this before android pie becouse my slider got stuck on silence and i cant find any replacement on ebay of the phisycal slider.
https://play.google.com/store/apps/details?id=com.seveilith.oxygen.slider&hl=es_419

:DVAMOLMONTE said:
can you test oxygen slider? i was using this before android pie becouse my slider got stuck on silence and i cant find any replacement on ebay of the phisycal slider.
https://play.google.com/store/apps/details?id=com.seveilith.oxygen.slider&hl=es_419
Click to expand...
Click to collapse
i tried it with OOS 9.0.5
the app is detecting xposed
but is not affecting the slider function
i think because the oos version

How do I install it? I used to have it in android 8, but with the update i lost it... I'm afraid to install it and bootloop my phone or brick it...
screenshot: https://imgur.com/zNJ5H1n

xchikyx said:
How do I install it? I used to have it in android 8, but with the update i lost it... I'm afraid to install it and bootloop my phone or brick it...
screenshot: https://imgur.com/zNJ5H1n
Click to expand...
Click to collapse
if you go to Magisk Manager, Download Section, search for (Riru -EdXposed)
and you find all the instructions there
Cheers )

EdXposed
Which EdXposed did you use? SandHook or Yahfa?
Thanks

maverickmod said:
Which EdXposed did you use? SandHook or Yahfa?
Thanks
Click to expand...
Click to collapse
now i use Yahfa, but i tried both and they work, honestly i dont see the difference, but as the developer said , try both and stick with the one you find smoother
Cheers

Hi,
Please add the following modules to working list:
1. NekoSMS - https://github.com/apsun/NekoSMS
2. XPrivacylua

Im currently using this app, works well with the last oos update 28/oct/2019
https://play.google.com/store/apps/details?id=Orion.Soft

Status Bar Icons
Kellwa said:
Old: not maintained anymore
Hi everybody
i want to share that i was able to instal xposed on OOS 9.0.3 with android 9 pie
and am testing now what modules are working and not
i got it from the link here:
please if you install it share with me what modules are working with you
try it at your own risk, am not responsible for any brick
UPDATE: installed Edxposed 0.2.9.8 and EdXposed installer, thing are smoother now
for me it looks like these modules are
Working
- MinMinGuard
- Youtube Background Playback 2.0.5
- Youtube Adaway
- Xposed Edge
Not Working
- Statusbar Download Progress
- Download redirection (makes xposed installer not detecting that xposed is installed - so destroys all xposed functionality)
Click to expand...
Click to collapse
How did you customize your status bar icons such as WiFi and Flashlight? I've been searching with no success...

AdamTV said:
How did you customize your status bar icons such as WiFi and Flashlight? I've been searching with no success...
Click to expand...
Click to collapse
it is a substratum theme called Ethereal
https://play.google.com/store/apps/details?id=com.schnettler.ethereal

when i use riru-core 19.6, edexposed 0.4.6.0-beta and magisk 20.2 i get bootloop. What versions to use to avoid this? For OxygenOS 9.0.9

Try edxposed 0.4.5.1 4463. It works for me on OOS 9.0.10