Can't flash to Stock - T-Mobile Galaxy Note 4 Q&A, Help & Troubleshooting

Hello, I went into TWRP and accidentally wiped everything. When I rebooted, it claimed that I had no OS installed, and so I am currently attempting to flash back to stock and whenever I attempt to do so, Odin fails. I am using the N910T and I am fairly certain that I am using the correct stock rom. Here is what I get from Odin whenever I try to flash to stock.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910TUVU1ANK4_N910TTMB1ANK4_N910TUVU1ANK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This has happened each and every time I have tried to do this, and I'm not understanding why. I've Googled it and none of the solutions I found seemed to work for me. I am pretty much out of options here. I have no idea what to do. Could someone walk me through this, as I am somewhat new to this whole thing. Thanks in advance.
EDIT: Found working solution.

wavy_devon12 said:
Hello, I went into TWRP and accidentally wiped everything. When I rebooted, it claimed that I had no OS installed, and so I am currently attempting to flash back to stock and whenever I attempt to do so, Odin fails. I am using the N910T and I am fairly certain that I am using the correct stock rom. Here is what I get from Odin whenever I try to flash to stock.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910TUVU1ANK4_N910TTMB1ANK4_N910TUVU1ANK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This has happened each and every time I have tried to do this, and I'm not understanding why. I've Googled it and none of the solutions I found seemed to work for me. I am pretty much out of options here. I have no idea what to do. Could someone walk me through this, as I am somewhat new to this whole thing. Thanks in advance.
EDIT: Found working solution.
Click to expand...
Click to collapse
You can't flash back to KITKAT, what was your solution?

Related

tmobile to metro odin nand fail

i have s6 i bought and found tmobile dont run in my area and want to flash im trying to unlock the phone and ever time get nand fail. i am going by the samunlocks guide. and using there md5 file anything im missing.
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920T1UVU1AOCH_G920T1TMB1AOCH_G920T1UVU1AOCH_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Use latest Odin 3.10.7 and firmware OJ9 and it should be fine.
where do i get the firmware same problem tried unlockbase but not getting no help
What carrier you trying to use?
I want use straight talk att sim but would to unlock it
Sent from my SAMSUNG-SM-G900A using Tapatalk
Flashing firmware not going to help. What your current firmware?
The way to unlock is to contact the user stifilz

Trying to root Sprint note 5

I have been at it for days stuck on the recovery is not seandroid enforcing screen so I tried flashing back to stock firmware using Odin 3.10 and now this is the log I am getting any and all help and advice is appreciated I have installed the latest driver for my phone as well
[EMAIL="ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable.. <OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)[/EMAIL]

Hello guys!

I have a note 5 SM-N920C (vietnam model). My phone is stuck at "An error has occured while updating the device software. blla blla blla"). The thing is that i cannot use smart switch or kies because i have an international model and it is not supported. I tried to flash stock firmware (SM-N920C) via odin v10.6 but it was not vietnamese,its from Cambodia. It failed to flash and got me stuck in here for days trying to figure it out.
From Odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920CXXU2BPB6_N920COLB2BPB6_N920CXXU2BPB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
dori17 said:
I have a note 5 SM-N920C (vietnam model). My phone is stuck at "An error has occured while updating the device software. blla blla blla"). The thing is that i cannot use smart switch or kies because i have an international model and it is not supported. I tried to flash stock firmware (SM-N920C) via odin v10.6 but it was not vietnamese,its from Cambodia. It failed to flash and got me stuck in here for days trying to figure it out.
From Odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920CXXU2BPB6_N920COLB2BPB6_N920CXXU2BPB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Get the needed firmware HERE (Sammobile.com)
The site also provides a newer ODIN version (3.10.6 is out of date)
You will need to register with a valid email to download files from Sammobile.com
And don't be afraid about the download speed as its 300KB/s for free accounts (Not 15KB/s as mentioned)
I think i had the same problem and it was because i was using a lower update and different region rom ! U must flash the exact rom as it's on your phone
Sent from my SM-N920C using Tapatalk

How to rollback firmware from N910TTMB2EPG2 (6.0.1) to N910TTMB1COG2 or N910TTMB2DOK

Hi,
I recently upgraded my firmware to N910TTMB2EPG2. Most of the custom roms out here are on N910TTMB2DOK2 or N910TTMB1COG2. How do I downgrade my firmware to N910TTMB2DOK2 or N910TTMB1COG2?
After downloading the firmwares, when I try to flash it using ODIN I get below error messages.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910TUVU1COG2_N910TTMB1COG2_N910TUVU1COG2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
I'm having the same problem! Did you ever figure it out?
I don't think you can downgrade from either EPG2 or EPJ2 mate.

need some help to root my N910T3 note 4 with Marshmallow 6.0.1

tried to root my note 4 using the latest odin and N910T3 version of tar.md5 but always stalk at following step:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img.ext4
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas?
Thank you very much
song52xs said:
tried to root my note 4 using the latest odin and N910T3 version of tar.md5 but always stalk at following step:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img.ext4
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas?
Thank you very much
Click to expand...
Click to collapse
Hi Song52xs, just following up on your problem. Did you use the search feature before posting?. I know you're a Junior member, but searching is the best friend here in XDA. A quick look gave me a link to a ROM that is stock and rooted you can try this https://forum.xda-developers.com/no...rom-n910t3uvu3eqc1-stock-rooted-odex-t3592242.
You're rooting with a "tar.md5" file? Doesn't sound like you're rooting properly... Do you want to root using SuperSU or Magisk?
Perhaps you should search here for how to root first. Or tell us about your rooting method(maybe you got a new method).
I assume you figured out how to Root your N910T3.
If not, check out the forum post below. You need to enable OEM unlocking first.
https://forum.xda-developers.com/note-4-tmobile/general/easy-steps-n910t3-dofc-dog1-how-to-root-t3177225
Then follow the steps in this other post
https://forum.xda-developers.com/no...y-steps-n910t3-dofc-dog1-how-to-root-t3177225
Are you using the right file to install twrp, then using the lastest supersu file to flash?

Categories

Resources