[ROM] [7.1.2] [Snapdragon] [MultiVariant] EmotionOS [06/23/2017] - Verizon Galaxy Note 4 Android Development

[ROM] [7.1.2] [Snapdragon] [MultiVariant] EmotionOS [06/23/2017] - Verizon Galaxy Note 4 Android Development

EmotionOS aims to provide stability, performance optimizations, ultimate customizations, theme support, security patches, and the most recent updates. If you are looking for a stable ROM that is featureful and fully customizable, you are in the right place.
Only bug reports with logs belong to this development thread while all other topics and questions should be posted in the Q&A thread.
Click to expand...
Click to collapse
Disclaimer:
Code:
[B][COLOR="Red"]Your warranty is now void.[/COLOR][/B]
I am not responsible for bricked devices,
dead SD cards, thermonuclear war, or you
getting fired because the alarm app failed.
Please do some research if you have any
concerns about this ROM before flashing it!
YOU are choosing to make these modifications,
and if you point the finger at me for messing
up your device, I will laugh at you. A LOT.
Tags:
The builds will have three tags:
STABLE: include tested changes and confirmed bug fixes;
are suitable for daily use.
TESTING: include experimental changes to be evaluated and to possibly fix some issues;
may be used as daily driver only if they don't break functionality or introduce new issues.
VZW-ONLY: same as TESTING builds, but support Verizon variant (VZW SM-N910V) only.

Click to expand...
Click to collapse
Changelog:
For the latest changes and bug fixes, check the 2nd post.
You may also join EmotionOS Google+ Community.
Click to expand...
Click to collapse
Status:
This ROM supports all Snapdragon variants, especially US variants (Verizon / VZW SM-N910V, T-Mobile/TMO SM-N910T, Sprint / SPR SM-N910P, and US Cellular / USC SM-N910R4) and Canadian variant (SM-N910W8).
Check the ROM status in the 3rd post!
Click to expand...
Click to collapse
instructions:
Use this custom TWRP recovery
Make full backup
Do a full factory reset
You should wipe the system partition!
Flash the ROM ZIP + Gapps ARM 7.1
Gapps nano package is recommended!
Enjoy!
Only for international variants (SM-N910F/G):
>>> Flash RIL/QMI fix from the 3rd post, before flashing Gapps.
Click to expand...
Click to collapse
Notes:
Read the announcement post before flashing any OTA update.
Clean flash (wipe system/data/cache/dalvik) is recommended.
You need to install Gapps for ARM SDK 25 (Android 7.1.1 Nougat) .
You may also need to set default Apps and grant special access/permissions.
In Settings / Apps:
- Click the Settings icon and select "Show system" from the 3-dot menu...
Make sure that your preferred APNs are selected in Settings/Cellular networks.
If you run into DRM/Netflix issues, flash WidevineDRM_N910VVRU2CPL1.zip!
If you want to restore stock display colors/options, turn off LiveDisplay (set Display Mode to Off), Adaptive Display, and Ambient Display. Otherwise, enjoy tweaking your display options and calibrate the colors for your liking.
For fingerprint enrollment, you may need to swipe quilckly one more time at the end so that you get two "Done" messages. Fingerprint won't work until you successfully register at least one finger.
To enable backlight for hardware keys, go to Settings >> Emotion Control >> Buttons, disable and re-enable hardware keys switch, and set backlight brightness and illumination timeout.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Downloads:
EmotionOS Builds for Samsung Galaxy Note 4
Click to expand...
Click to collapse
XDA:DevDB Information
EmotionOS, ROM for the Verizon Samsung Galaxy Note 4
Contributors
hsbadr, Pafcholini
Source Code: https://github.com/EmotionOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: N910VVRS2CQE1
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: 7.1.2-20170623
Stable Release Date: 2017-06-23
Created 2016-12-30
Last Updated 2017-06-27

Changelog
Green dates are for STABLE builds, blue dates are for TESTING builds, and red dates are for VZW-ONLY builds. To learn more about build tags, check OP!
You may find a WIP section on top, for what to expect in the coming build. You could vote for a newer build by hitting THANKS to the announcement post of the latest build. For more details, check ROM status in the 3rd post!
All builds include the upstream EmotionOS and/or LineageOS changes.
WIP:
...
23.06.2017:
Enabled SDCardFS
Enabled USB emulation
Enabled ZRAM/ZCACHE
Extended filesystems support
LineageOS 14.1 (Android 7.1.2 Nougat)
Updated SELinux policy and addressed denials
Updated vendor proprietary blobs (N910VVRS2CQE1)
28.03.2017:
Enabled Bluetooth SIM Access Protocol (SAP)
Enabled conference support for video calls
Fixed video autoscaling in the kernel
Increased audioflinger shared memory heap size
Increased Bluetooth TX timeout to 5 seconds
Updated APNs for VZW legacy CDMA networks
Updated camera HAL wrapper and configs
Updated display board configs and flags
Updated GLES version string to 3.2
Updated IPC Router Security Configuration (IRSC)
Updated kernel source code and ramdisk
Updated lights HAL from Samsung hardware
Updated media board configs and flags
Updated permissions and contexts for cpufreq
Updated SELinux policy and addressed denials
Updated SysFS permissions for leds
Updated translations and fixed typos
20.03.2017:
Added Gello package instead of AOSP Browser
Added support for OMS rootless Theme Interfacer
Enabled SIM Toolkit (STK) functionality
Enabled QCRIL UIM VCC feature
Increased bluetooth disable delay
Increased bluetooth patch settlement delay
Moved wakelock overlay for flashlight
Updated camera HAL wrapper and configs
Update GIDs, permissions and ownerships
Updated SELinux policy and addressed denials
Updated vendor proprietary blobs
12.03.2017:
Allowed flashlight to hold a wakelock
Enabled block-based OTAs
Enabled the Pinner Service
Included both Camera2 and SnapCam
Removed IP reachability monitor config
Set shutdowns timeout system property
Updated default permissions and capabilities
Updated media configs and overlays
Updated SELinux policy and addressed denials
Updated SnapCam camera app
Updated vendor proprietary blobs
28.02.2017:
Added face detection toast notification
Disabled quick pulldown by default
Patched CVE-2017-5967 vulnerability
Re-enabled hardware keys switch
Removed obsolete system props
Removed CMFileManager and Gello
Restored SnapCam configs and strings
Restored Substratum's background service
26.02.2017:
Added SELinux rules for SuperSU
Added support for SuperSU systemless root
Cleaned up and updaed SELinux rules
Correct minor string typos in Emotion Control
Enabled bluetooth interleaved scan feature
Fixed hardware keys backlight/brightness
Removed broken init entries/scripts
Set default bluetooth name using device model
Updated board configs and framework overlays
Updated camera HAL and SnapCam configs
Updated power HAL and removed obsolete hints
Updated SELinux policy and addressed denials
Updated vendor proprietary blobs (N910VVRS2CQB2)
20.02.2017:
Added aptX and aptXHD bluetooth audio codecs
Adjusted FlipFlap window dimensions
Changed default notification colors
Cleaned up and updated SnapCam app
Cleaned up and updated the RIL class
Enabled bluetooth AVRCP feature/profile
Enabled VoLTE in framerwork overlays
Fixed Fingerprint/ValidityService enrollment
Fixed permissions and SELinux contexts
Hid sRGB toggle in developer options
Replaced Snapdragon Gallery with Gallery2
Reset VSYNC event phase offsets
Restored bluetooth configs and overlays
Set idle GPU frequency to 240 Mhz
Updated and organized vendor proprietary blobs
Updated app permissions and SELinux rules
Updated camera HAL and SnapCam configs
Updated configs for panel display modes
Update graphics permissions and SELinux contexts
Updated SELinux policy and addressed denials
Updated screen density / AAPT configs
13.02.2017:
Added FlipFlap app for smart/flip cover
Cleaned up and updated CustomDoze app
Cleaned up system properties and overlays
Disabled block-based OTAs for multi-variant system
Enabled GPS HAL coarse position injection
Enabled more features for bluetooth compatibility
Enabled overlay for all location components
Fixed GPS with Samsung's legacy blobs
Fixed permissions and removed invalid UIDs
Fixed various issues in the boot sequence
Fixed video autoscaling on old OMX decoders
Fixed Youtube by removing smooth streaming property
Removed nonexistent firmware symlinks
Reorganized and cleaned up the source code
Updated and cleaned up camera overlays/configs
Updated audio configs and increased volume
Updated camera HAL and fixed some issues
Updated GPS configs and used HTTPS for XTRA
Updated MSM thermal paths/parameters
Updated SELinux policy and addressed denials
Updated services groups and capabilities
Updated vendor proprietary blobs (N910VVRS2CQA1)
05.02.2017:
Cleaned up and updated camera HAL wrapper
Replaced Camera2 app with a custom SnapCam
Secured kernel and ADB debugging
Updated Consumer IR HAL with MS_IR_SIGNAL
Updated device-specific power HAL
Updated display configs and board flags
Updated GPS XTRA servers and added CA path
Updated kernel configs and ramdisk
Updated SELinux policy and addressed denials
Updated vendor propietary blobs
Used numbers for camera HAL ISO values
Used real time values for lockscreen charging info
29.01.2017:
Added more features to Emotion Control
Added support for new mDNIe scenarios
Added QTI telephony extension
Cleaned up and updated camera HAL wrapper
Cleaned up board configs/flags
Cleaned up Dalvik/ART filter flags for JIT mode
Cleaned up system properties
Disabled lockscreen rotation override
Enabled Qualcomm's AV enhancements
Increased maximum number of users
Removed HW keys system property
Removed obsolete configs and overlays
Updated Bluetooth configs and overlays
Updated CMHW java classes
Updated Dalvik/ART filters/configs
Updated GPS HAL and configs
Updated kernel configs and ramdisk
Updated SELinux policy and addressed denials
Updated vendor propietary blobs
Various updates, tweaks, and bug fixes
20.01.2017:
Added per-app cellular data and WiFi restrictions
Added UI blur and volume link notification switch
Adjusted color temperature settings for LiveDisplay
Enabled UI blur support and added required blobs
Enabled/forced lockscreen rotation by default
Fixed Widevine DRM issues (Netflix) using L3 mode
Protect com.android.systemui.doze.pulse broadcast
Updated and cleaned up vendor proprietary blobs
Updated camera HAL wrapper and parameters
Updated SELinux policy and addressed denials
17.01.2017:
Added hardware keys on/off option
Cleaned up telephony system properties
Enabled various kernel features/configs
Fixed rotation issues with Samsung firmware
Removed unused/obsolete overlays
14.01.2017:
Restored modem-host interface (MHI) driver
Updated Messaging/Mms configs/overlays
Updated SELinux policy and addressed denials
12.01.2017:
Addressed more SELinux denials
Fixed Gallery FC with photo editing
Fixed SELinux file and service contexts
Updated bluetooth configs and overlays
Updated modem-host interface (MHI) driver
Updated vendor proprietary blobs
09.01.2017:
Added Snapdragon Gallery app
Addressed more SELinux denials
Cleaned up media configs and profiles
Fixed statusbar position/style
Restored EmotionOS statistics
Updated camera HAL wrapper
Updated Emotion Control package
08.01.2017:
Added carrier services and Sprint helper
Added more features to Emotion Control
Enabled VVM3 visual voicemail for VZW
Fixed Widevine DRM issues such as Netflix
Updated build info from MM 6.0.1 (N910VVRS2CPL1)
Update CarrierConfig overlays with more configs
Updated proprietary blobs (N910VVRS2CPL1)
Updated SELinux policy and addressed denials
04.01.2017:
Added option to select 4G or LTE
Cleaned up frameworks/SystemUI overlays
Fixed button actions reassignment
Re-organized Settings UI with summaries
Updated tethering configs and overlays
Updated SELinux policy and addressed denials
Updated Widevine DRM proprietary blobs
02.01.2017:
Added Dirty Unicorns navigation bar
Added missing resources in Settings
Cleaned up and updated overlays
Fixed Call Log reset with Bluetooth
Increased audio offloading buffer size to 64kb
Implemented EmotionOS OTA support
Retored Bluetooth configs and overlays
Showing 4G instead of LTE in SystemUI
Updated data services from CAF source code
Updated kernel ramdisk and service definitions
Updated SELinux policy and addressed denials
30.12.2016:
Fixed CPU info in Settings/About phone
Full support for Substratum OMS themes
Rebased on LineageOS (RIP CyanogenMod)
Removed unneeded HexoLibre theme
Updated display calibration and configs
Updated SELinux policy and addressed denials
Updated TelephonyProvider symlinks
Used 4 threads for dex2oat
Used the default/prebuilt GPS HAL
25.12.2016:
Cleaned up and updated audio configs
Disabled ERI operator string for non-VZW variants
Enabled TTY mode in Telecomm service
Increased gain for camcorder microphone
Increased gain for other mixer paths
Made time daemon MLS trusted subject
Restored contexts for directories during init
Set proper WiFi and bluetooth power configs
Updated operator info for CDMA variants
Updated SELinux policy and addressed denials
23.12.2016:
Added missing camera parameters
Addressed SELinux denials
Created missing init directories
Enabled gesture settings
Falling back to L3 by removing liboemcrypto
Re-enabled fingerprint wake-and-unlock
Updated init and kernel ramdisk
Updated RIL SHIM library
20.12.2016:
Cleaned up and updated media codecs
Created missing log directories
Defined actions to be executed during/after boot
Disabled camera CPP duplication
Disabled nonexistent media decoders
Disabled unsupported Qualcomm's flags
Enabled telephony IPv6 capability
Enabled the setgid bit on directories created by init
Fixed nandroid restores due to telephony data
GPS: Added android_runtime dependency
GPS: Cleaned up and updated GPS/location configs
GPS: Fixed missing Samsung sec-GPS configs
GPS: Fixed "Use of memory after it is freed" warning
Handled framebuffer hint for Ambient Display
Reverted "Allow Flashlight service to use wakelock"
Moved camera service to run on late start
Set appropriate permissions for time data
Toned down VM BMS logging level
Tuned system properties for graphics performance
Updated camera parameters and sysfs permissions
Updated and cleaned up SHIM libraries
Updated audio features and board flags
Updated graphics framebuffers permissions
Updated kernel cmdline for debugging
Updated QMUX daemon socket permissions
Updated Qualcomm's time services
Updated SELinux policy and addressed denials
Used the default number of surface buffers
15.12.2016:
Addressed SELinux denials
Allowed Flashlight service to use wakelock
Built OMX libraries from source code
Cleaned up media codecs from white spaces
Disabled fingerprint wake-and-unlock
Enabled Qualcomm's DivX video decoders
Enabled Qualcomm's MPEG video decoders
Fixed fingerprint/home wake conflict
Fixed Google Home app crashing
Fixed Google Fit app crashing
Fixed graphics and media configs
Moved qcamerasvr service to main class
Re-configured radio access family
Reduced bootanimation resolution to speed up boot
Restricted ERI for CDMA carriers
Updated init services GIDs
Updated media codecs and profiles
Updated/Restored trlteRIL java class
13.12.2016:
Added support for Substratum theme engine
Added system properties for Perf
Allowed all display rotation angles
Allowed interfaces to get v6 address for tethering
Cleaned up and organized system properties
Cleaned up and updated kernel ramdisk
Cleaned up CellBroadcastReceiver overlays
Cleaned up framework base overlays
Cleaned up SELinux contexts and escaped '.' character
Configured VSYNC phase offsets
Created Telephony Provider symlinks for legacy RIL
CyanogenMod 14.1 (Android 7.1.1 Nougat)
Disabled bluetooth by default
Disabled Qualcomm's location stack
Enabled extended video features
Enabled install non-market apps by default
Enabled IPv4 defrag and rpfilter support
Enabled IPv6 defrag and rpfilter support
Enabled PCM audio offload by default
Enabled SAP sensors for GPS use
Fixed MMS sending failure
Fixed offline charging animation
Fixed unknown phone number
Fixed unknown network / operator
Fixed Widevine DRM SHIM library
Forced reading operator-string from ERI XML
Increased maximum readahead to 512 KB
Increased media volume to 30 steps
Increased voice call volume to 15 steps
Moved ERI configuration files to CarrierConfig
Moved time_daemon service to main class
Removed duplicated system properties
Removed obsolete system properties
Removed old-apns-conf.xml APN list
Removed QTI telephony extension
Removed TelephonyProvider APN overlays
Removed unneeded Contacts overlays
Removed unneeded Keyguard overlays
Removed unneeded Messaging overlays
Removed unneeded Telephony overlays
Restored Samsung proprietary boot classes
Restored Graphics/HWC system properties
Reverted the custom bootanimation
Set correct permissions for tombstones
Set device provisioned by default
Set P2P preferred channel list
Set SELinux label for wifiloader service
Switched to CM charger libhealthd
Switched to unified LED capabilities overlay
Use 3 surface buffers to avoid timing issues
Used alternate ERI XML via init
Used HTTPS for GPS/XTRA2 download
Updated proprietary blobs (N910VVRU2CPJ2)
Updated all GPS/location configs
Updated and unified MMS configs
Updated build info from N910VVRU2CPJ2
Updated CarrierConfig overlay for all variants
Updated consumer IR HAL
Updated charging thresholds in uW
Updated doze and ambient display configs
Updated eMBMS configuration parameters
Updated media codecs and profiles
Updated Qualcomm's Adreno GPU drivers
Updated IMS/VoLTE proprietary blobs
Updated IMS/VoLTE system properties
Updated NFCEE access for Android 7.x Nougat
Updated servcies GIDs and SELinux labels
Updated SELinux policy and addressed denials
Updated system properties for audio
Updated system properties for media
Updated thermal-engine SHIM library
Updated vibrator/vibetonz sysfs permissions
26.11.2016:
Enabled proximity check on screen wake
Enabled suspend when screen is off due to proximity
Increased the maximum size for MMS message
Reset MMS user agent string and profile URL
Updated AAPT/DPI configs and system properties
Updated security configs for Android 7.x Nougat
Updated SELinux and addressed denials
kernel: Addressed eMMC 5.0 spec violation
kernel: Disabled MSM DMA test module
kernel: Updated filesystem drivers
kernel: Updated EXT4 driver
kernel: Updated ecryptFS driver
kernel: Updated sdcardFS driver
kernel: Updated MSM camera driver
kernel: Updated MSM GPU driver
kernel: Updated MSM IPA driver
kernel: Updated MSM SoC sound codecs
kernel: Updated MSM SoC sound driver
kernel: Updated network drivers
kernel: Updated QSEECOM driver
kernel: Updated Qualcomm SoC driver
kernel: Updates from the latest source code
25.11.2016:
Added custom telephony plugin
Added support for trltedt (SM-N910G)
Cleaned up CarrierConfig overlays
Cleaned up framework and boot class path
Customized telephony network values
Ported updates from Pixel XL images
Re-added custom bootanimation
Updated Android filesystem config
Updated ramdisk services groups
Updated SELinux policy and addressed denials
Updated SELinux rules for camera
Updated SELinux rules for CMHW/vibrator
21.11.2016:
Disabled Samsung MTP
Fixed unexpected app crashes
Updated CarrierConfig overlays
Updated telephony overlays
Updated vendor proprietary blobs
19.11.2016:
Fixed first/clean boot issues
Fixed media/Youtube audio issues
Fixed speaker and mic for voice calls
Optimized and cleaned up kernel ramdisk
Removed unused CM NFC feature
Reverted the custom bootanimation
Updated SELinux rules for the kernel
Updated filesystem mount options
Updated filesystem manager flags
Updated firmware GID and mount masks
18.11.2016:
Added support for all Snapdragon variants
Added fs_config support for custom binary
Added custom permissions for pm, camera, and IMS
Applied a fix for emergency calls
Enabled reschedule/delay service restarts
Restored audio configs from Touchwiz
Updated media codecs for Nougat
Updated media profiles for Nougat
Updated RIL java class for Nougat
Updated WiFi configs for Nougat
Updated SELinux and addressed denials
Updated SELinux rules for media hacks
Used set_prop to replace deprecated rules
Custom bootanimation by @Creeper36
14.11.2016:
Enabled audio features
Enabled Cell Broadcast settings
Enabled VoLTE bools
Hacked media for legacy blobs
Unified build for all variants
Updated SELinux policy
13.11.2016:
Addressed SELinux denials
Fixed some errors/exceptions
Updated proprietary blobs
12.11.2016:
Addressed SELinux denials
Fixed Widevine DRM
Restored audio effects
Updated media codecs
Updated bluetooth overlays
Updated telephony overlays
10.11.2016:
Preliminary support for other variants
Updated audio configs
Updated bluetooth configs
Updated SELinux policy
Updated kernel source code
November security patches
06.11.2016:
Initial Release of Android 7.1 Nougat
Click to expand...
Click to collapse

ROM Status
Release Date:
No ETA, but you could vote for a newer build by hitting THANKS to the announcement post of the latest build.
Click to expand...
Click to collapse
Supported Variants:
This ROM fully support US variants:
Verizon / VZW (SM-N910V)
T-Mobile / TMO (SM-N910T)
Sprint / SPR (SM-N910P)
US Cellular / USC (SM-N910R4)
and
Canadian variant (SM-N910W8)
International Snapdragon variants (SM-N910F and SM-N910G) need RIL/QMI fix. This can be done by flashing blobs from the latest firmware (cm-14.1-trltexx-fix_v3.zip or cm-14.1-trltexx-fix_v4.zip) before flashing Gapps.
Nandroid Backup/Restore:
To fix nandroid restores (No SIM and Phone FCs) due to TelephonyProvider data/symlinks for using legacy RIL blobs on newer versions of Android 7.x+, you may wipe TelephonyProvider data by flashing this ZIP directly after restore and before rebooting to system.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Required Firmware:
The latest firmware (currently, Android 6.0.1 Marshmallow) is required for all variants. Check your device/variant forum for firmware upgrade!
VZW-ONLY: Bootloader Unlock and Upgrade to Marshmallow
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Bug Reports:
All bug reports should be posted here. I'll ignore the posts that don't include appropriate logs. Unfortunately, I don't have the time to respond to the PMs.
Click to expand...
Click to collapse
User Support:
There's a linked thread for Q&A, general discussions, and pre-/post-installation chat. Please keep this thread clean and post there all your personal issues that are not related to the development such as Xposed, themes, extra mods, other stuff, ... etc.
This thread is only for development, including bug reports with logs. All other topics should be moved to the support thread.
Thank you for collaboration! That's how users could contribute to the development.
Click to expand...
Click to collapse

You just made my day, flashing...

Thank you for your work. ^^ I'll give it a try.

Wow new rom to try
I am looking forward to trying this rom out

EmotionOS Downloads
The builds are moved to EmotionOS Downloads.
OTA updates will be supported in the next build.

@hsbadr Thanks!

@hsbadr Awesome Build!
I noticed that when trying to add (edit) the Quick Settings - I can only drag and drop the tiles that are closer to the top - The others just "bounce" back to their original position.
Log attached (hopefully it caught the issue)
Have a Very Safe - Very Happy and Healthy New Year ?
Thanks again!
https://drive.google.com/file/d/0B9TbnlZl-ugWdTFSN01SaXQ3dXM/view?usp=drivesdk
Sent from my Galaxy Note 4 using XDA Labs

Thank you ,look forward to using this ROM
Sent from my SM-N910V using XDA-Developers mobile app

Thanks.
But I have a little problem with samsung music app. It can't launch

Thanks for the ROM.

Happy New Year!
We're preparing New Year gifts for EmotionOS supporters/followers :good:
Some of you have voted against the development and down-rated the thread(s). If you do support this work, please leave 5-star rating, hit THANKS to the posts you like, and join EmotionOS Google+ Community! Only bug reports with logs belong to this development thread while all other topics and questions should be posted in the user support thread.
Read OP for general information and installation instructions/notes! Changelog is in the 2nd post and ROM status including the required firmware is in the 3rd post.

ripee said:
Read the OP please, and this is the wrong thread to be asking questions.
Click to expand...
Click to collapse
What is this section for ?
---------- Post added at 03:50 PM ---------- Previous post was at 03:48 PM ----------
plainbum said:
What is this section for ?
Click to expand...
Click to collapse
I see now
"Only bug reports with logs belong to this development thread "
No 4G on my 910V only 3G
Would someone be willing to help me get this working please? Ill answer any question you ask.
Preferred Network type = Global
System Select = Auto
CDMA subscription= RUIM/SIM
Access Point Names = Verizon VZWINTERNET
As my phone is a Dev Ev model I flashed this to get on the newest modem:
From Hsbadr:
"If you're already on unlocked Android 6.0.1 Marshmallow bootloader, you can extract and flash the DevEd partial fimware via Odin to upgrade:
N910VVRU2CPJ2_PartialFirmware_DevEd.tar.md5.7z"
This looks like a great ROM and I would like enjoy it,
Thanks!
I created a bug report, not sure what to do with it.a
it is a .zip file
HOW DO I SUBMIT A BUG REPORT?
I HAVE ZIP file and a serial number.

Using as daily driver on my N910T, no bugs so far...
Thanks :laugh:

ianeli1 said:
Using as daily driver on my N910T, no bugs so far...
Thanks :laugh:
Click to expand...
Click to collapse
How did you flash it onto your N910T ? Are you using trltexx TWRP? I'm getting "E3004: This package is for device: trltexx, trltedt; this device is trltetmo." using trltetmo TWRP. I plan to flash a new recovery to work around this, but just want to make sure I'm on the right track Too impatient to wait for tomorrow's unified build
EDIT: Did it as described - worked !

fragtion said:
How did you flash it onto your N910T ? Are you using trltexx TWRP? I'm getting "E3004: This package is for device: trltexx, trltedt; this device is trltetmo." using trltetmo TWRP. I plan to flash a new recovery to work around this, but just want to make sure I'm on the right track Too impatient to wait for tomorrow's unified build
EDIT: Did it as described - worked !
Click to expand...
Click to collapse
I flashed the rom on my n910t with no problem. Latest twrp.
---------- Post added at 09:18 PM ---------- Previous post was at 09:15 PM ----------
plainbum said:
What is this section for ?
---------- Post added at 03:50 PM ---------- Previous post was at 03:48 PM ----------
I see now
"Only bug reports with logs belong to this development thread "
No 4G on my 910V only 3G
Would someone be willing to help me get this working please? Ill answer any question you ask.
Preferred Network type = Global
System Select = Auto
CDMA subscription= RUIM/SIM
Access Point Names = Verizon VZWINTERNET
As my phone is a Dev Ev model I flashed this to get on the newest modem:
From Hsbadr:
"If you're already on unlocked Android 6.0.1 Marshmallow bootloader, you can extract and flash the DevEd partial fimware via Odin to upgrade:
N910VVRU2CPJ2_PartialFirmware_DevEd.tar.md5.7z"
This looks like a great ROM and I would like enjoy it,
Thanks!
I created a bug report, not sure what to do with it.a
it is a .zip file
Click to expand...
Click to collapse
I have the same problem, trltetmo, no 4g. 3g &2g works. Only lte makes network bars disappear.

ianeli1 said:
I dont know, i just wiped with the latest TWRP (3.0.2.0) for trltetmo and then installed without gapps, then rebooted again and installed them. It didn't show any of that.
Click to expand...
Click to collapse
enian.doda said:
I flashed the rom on my n910t with no problem. Latest twrp.
Click to expand...
Click to collapse
Was your filename = Emotion-trltexx-NG.beta32-r1.Official-20161220-220953.zip ?
I'm using that with trltexx TWRP 3.0.2.0 and it seems to be working. Wouldn't flash with trltetmo TWRP though :|
Edit: mobile voice/data wasn't working. Solution was to install the VZW beta rom, which is working okay besides for GPS lock pretty much... but I think let's wait for tomorrow's build before we complain about such bugs

There is no file to download on android file host. 2 folders but no files

@ianeli1 Does LTE work? Doesn't on mine.

Related

[DISCONTINUED][ROM][6.0.1r52]Resurrection Remix-MM 5.7.0 [T00F/J]

Changelog (08072016):
Merge 6.0.1_r52 branch
July stagefright patch is there
Build is is MOB30R
Changelog (07072016):
Fix sensors
Sync RR sources
Changelog (06072016):
Use another ramdisk
Remove CMactions
Sync RR sources
Changelog (23062016):
boot: changes in zram and f2fs work
boot: update adbd and healthd binaries
Update RR Ota app to v69
Sync RR sources
Changelog (21062016):
Fix camera video recording
Fix Houdini
Fix A-GPS
Update ramdisk of boot
Build new bzimage
Sync RR sources
Revert a ton of changes
Changelog (17062016):
Use device tree, ramdisk and bzImage by X AnwarMov
It was very hard to make bring up because there are many missing stuff in his tree but i fixed it. xD
So if something does not work, report me.
Note: If somebody consider to do same, use this:
https://github.com/tank0412/android_device_asus_ctp-common
https://github.com/tank0412/proprietary_vendor_asus
http://review.cyanogenmod.org/#/c/142597/
Changelog (15062016):
Fixing APN issue
Revert "Test Houdini from Samsung Galaxy Tab 3 10.1" (it may fix freezes in games)
Sync RR sources
More old changelogs:
Changelog (14062016):
Partly fix APN issue
Use blobs from 3.24.40.87 firmware (experimental)
Sync RR sources
Changelog (13062016):
overlay: enable automatic brightness by default
Use stock apns.conf
ctp-common: add power_profile.xml from T00F
update from stock power profile
Add support power profile for a600cg
ctp-common: overlay: add conf fir mms, platform and upd tel conf
Fix SD write perm (!?)
ctp-common: overlay: fix building errors
Sync RR sources
Changelog (12062016):
(cherry-pick commits by quanganh2627)
Add new config_TerminalDetectWindowOrientation & config_nonPollingWindowOrientation
Some stuff for recording call session
Add intel permlic permissions
[Telephony] Allow users to switch prefer Network Mode (2G/3G/GSM...)
Let system handle the restoring of network selection
Sync RR sources
Changelog (11062016):
Add values for brightness from Kitkat
Sync RR sources
Changelog (08062016):
June stagefright patch is there
Merge 6.0.1_r43->6.0.1_r46 (build id is MOB30M)
Sync RR sources
Changelog (06062016):
More stuff for debugging and clean up in default.prop
Revert: boot: Use NOOP I/O Scheduler during boot
Revert: boot: enable LZ4 compression for zram
Use ramdisk from kernel with enabled selinux (selinux was disabled there)
Also apply previous changes to this ramdisk:
Use fstab.zram, init.modem.rc, init.wifi.rc, init.wifi.vendor.rc, init.wireless.rc, init.zram.rc and init.gps.rc from ramdisk for RR LP (Stable7.2) by quanganh2627
Rom: sync RR sources
Changelog (05062016):
Use fstab.zram, init.modem.rc, init.wifi.rc, init.wifi.vendor.rc, init.wireless.rc, init.zram.rc and init.gps.rc from ramdisk for RR LP (Stable7.2) by quanganh2627
Sync RR sources
Changelog (03062016-V2):
Fixing issue which increased a rom size
boot: increase zram-swap (i hope that it will help users with 1 GB RAM)
boot: fixing Bluetooth
Sync RR sources
Changelog (01062016):
Add kernel which based on ramdisk from Stable3.1. Lets see is it fix a battery drain.
Sync RR sources.
Update custom OTA app to v65
More old changelog:
Changelog (31052016):
boot: use GCC v4.9 for building
boot: go back to ramdisk of 27th May
Sync RR sources
Changelog (29052016):
Update ramdisk of boot, build a new boot.
Update OTA app
And sync RR sources
Changelog (28052016):
Update OTA app by Sukarn to v52
boot: test another init.modem.rc
Sync RR sources
Changelog (27052016):
boot: Use NOOP I/O Scheduler during boot
boot: enable LZ4 compression for zram
rom: sync RR sources
Changelog (25052016):
Sync RR sources
Add updated OTA app by Sukarn
Changelog (24052016):
boot: fixing USB debugging (borrow ramdisk by dgadelha)
add custom OTA app (It looks like it is working) Thx Sukarn
Sync RR sources
Changelog (22052016):
boot: define CONFIG_LOCALVERSION
boot: revert few changes in a ramdisk to fix fc of kernel auditor
Revert "ctp-common: change ro.telephony.ril.config"
Sync RR sources
NOTE: commit a16437db6cd687bcfc8d2ca210f70c9fff80b24d by CM Team (Add p2 option in OpenLogicalChannel) for frameworks/opt/telephony was reverted due to building errors.
Changelog (21052016):
Update RR sources to 5.6.9
Changelog which was provided by RR Team:
ResurrectionRemix - v5.6.9 - Android 6.0.1_r43 - 20160520
Android 6.0.1_r30-> r43
Introducing Resurrection Remix Rom stats
SysUI:Custom Recents Style -Taskviewheader colors
Carrier Label Fonts Style
Custom Headers : Add new material design colorful headers
SystemUI : Re-order left statusbar icon layouts and paddings
Option to Hide carrier label based on notitication icons
FWB: Carrier label font style
Battery bar enhancements
ActivityManager: fix perf boost NPE
Qs: Add Audio Fx Visualizer Tile
batteryservice: Add support for segmented power LEDs
QSPanel: Fix Reported SystemUI FC on Themes Tile
SystemUI: avoid lock screen shortcut picker crash
SysUI: Show keyguard when LLS dies and had focus
pms: Skip reinstall of prebundles correctly per user.
systemui: Fix the TrustDrawable animation state
SystemUI: bail out of recents-to-home animation when losing focus
Lockscreen : Bunch-o-fixes
Themes: Expose manifest styles for framework activities
Add new options for call waiting response in InCallUI
SysUI: Make sure LLS focus is false when unlocking
perf: Send the process name and pid for launch boosts
am: Remove extraneous boostage
batteryservice: Use Alpha channel for segmented LED power level
ThemeTile: tighten up how we execute a theme change
CmRes: Attach themed cmsdk resources to assets
SystemUI: attach a queue to media player notifications
SystemUI: fix play queue crash
am: Don't protect apps that atttempt to grant uri perms
SystemUI: fix potential NPE with Queue
only use proximity checks on wakeup keys
SysUI: Use VectorDrawable's for rendering battery
Fix SystemUI FC on Media Notification Queue
bootanimation: fix check for system bootanimation
MediaScanner: Add support for default ringtones per sim
Fix incorrect behavior for statusbar and quicksettings panel
ActivityManager: fix perf boost NPE
QS: fix performance profile tile observer
SystemUI : Fix multi-user for keyguard
SystemUI: Set circle battery path as untranslatable
Update volume slider only if ringer mode changed
SystemUITests: fix compile error
Lockscreen : Disable left edge after showing keyguard
Keyguard: Allow swiping up when trust managed
SpamFilter : Hide option if notification cannot be filtered
FWB: Move Pulse Configs to Secure
LS:Fix Weather Panel Not hiding With Max Notif
Acquire wakelock until dream service acknowledges dream state change
Lockscreen : Only animate targets if launched via swipe
Ensure camera is launched if doing screen off gesture
Keyguard : Ensure we expand onIconClicked
WindowManagerService : Ensure we update both size/position
Fix Battery Icon Tint on Keyguard
SysUI:Update a Custom Logo
SysUI:Update some quick tile icons
Qs: Add Audio Fx Visualizer Tile
Speed up notification panel pulldown animation when called externally
Lls: Use LlsController for checking LLS focus
LLS: Don't change bar state when changing LLS focus
LLS: Ensure LLS loses focus when showing bouncer
ShutdownThread: Decrypt before stopping storage manager
VisualizerTile: Use proper Techniques to unlink with Pulse
Release alarm wakelock for blocked uid.
SyncManager: Adjust sync remaining time calculation.
Themes: Fix theming of cmsdk assets
Fix isComponentProtected calls in package manager tests
MSIM: Fix to resolve SIM PIN unlock in APM.
SystemUI: Check current data subscription when updating signal cluster
SysUI: Adjust battery dimensions for better look
am: Handle unchecked activity starts for protected components.
SysUI: Check swiping progress before collapsing KBA
SystemUI : Fix left swipe when dismissing bouncer
usb: ensure accessory detached sent on re-attach
SysUI:Cleaup Observers and fix certain mem leaks
SystemUI: fix NFC tile sometimes hiding
SystemUI : Ensure bouncer is not shown for SHADE
Port "Settings: add a way to not localize zone selections" to cm-13
Telephony: fix crash if SubInfo isn't ready
Settings:Close "Protected apps" activity during power cycle
Settings: Move vibrator value restore to onActivityStop
Settings: Use correct icon for sim card
Settingsisable battery pulsing if segmented battery LED is enabled
Settings:Update MultiTasking Category Icon
Settingsrotected apps: fix rotation states
Settings:LockPatternView: persist state across rotates
Settings:LLS: Load title and summary from ext. package if avail.
Settings: Make sure to rebuild on app entries loaded.
Settings: fix backlight illumination wrong summary
Settings: More Dashboard Customizations
Fix Reboot on Call Waiting Scenario
Update Translations
All updates from CM
For more info Track Github Activities
Changelog (20052016):
ctp-common: add charger images to device tree
Boot: fixing headphones
Sync RR sources so mobile internet must be OK. Just check it.
Changelog (19052016):
(based on work by dgadelha and X AnwarMov )
ctp-common: change ro.telephony.ril.config
ctp-common: Disable fsck on power off
ctp-common : drop ituxd overlay
ctp-common: switch to latest ramdisk (it looks like battery drain is fixed)
ctp-common: add libinit
boot: Disable faulty smartassH3 governor
boot: switch back to GZIP compression
boot: Update healthd, charger, dnfix and remove pclinkd (blank battery icon during charging in offline mode is fixed)
Sync RR sources.
Changelog (17052016):
Use updated libmultidisplay sources (cherry-pick commit by dgadelha)
Add more stuff to TARGET_OTA_ASSERT_DEVICE
Use boot from Stable3.1
Sync RR sources
Changelog (15052016):
Use boot.img from S3.2
Many changes in BoardConfig.mk (based on work by X Anwar Mov)
Sync RR sources
Add missing thermal config to system/etc
Changelog (14052016):
Add ituxd and thermal config (desparate attempt to fix heating)
Add non-modificated boot.img by dgadelha (desparate attemt to fix battery drain)
Sync RR sources
Changelog (13052016):
ctp-common: remove unused thermal config (enabled ituxd cause lag for some users)
ctp-common: Wi-Fi: add cyanogenmod additions by @X AnwarMov (hope that it will solve a wi-fi problem for some users)
Totally remove CMactions
Sync RR sources
boot: update ramdisk to possible fix of battery drain for some users
Changelog (12052016):
power: fugu: fixing DT2W (it was time to code)
power: fugu: make more changes in code
Sync RR sources
ctp-common: Enable the onscreen "Dial" button in the emergency dialer (Thanks X AnwarMov)
Preparing to remove CMactions (gesture menu) from Settings because it is useless.
Changelog (11052016):
Revert "board: disable the usage of cursor layers"
common : cmhw : recorect lto src (thx X Anwar Mov)
Some translate changes in CmActions
Automatic translation import for CMactions
Use Hoduini from Samsung Galaxy Tab 3 10.1 (Line app is working, so i think that Houdini is OK)
Sync RR sources
Changelog (10052016):
Use power driver from fugu
Test building without BOARD_PROVIDES_RILD (RIL)
board: disable the usage of cursor layers
Enable cpusets
Sync RR sources
Changelog (09052016):
boot: build new kernel from source (headphones is OK)
boot: revert few changes in a ramdisk
Sync RR sources
Other changes is based on work of X AnwarMov :
overlay : update tether configuration , fix wifi hotspot
cmhw : add Long Term Orbits (LTO) support
overlay : rename wifi direct name
boot: Use init.modem.rc from cvtlp-common repo (i hope that it will improve work of RIL)
Changelog (08052016):
Add support of f2fs
Re-add call of hardware/broadcom/wlan/bcmdhd/firmware/bcm4339/device-bcm.mk
Cherry-pick few commits by X AnwarMov :
Changes in GPS configuration
Use sepolicy from his cvtlp-common
ituxd : add thermal management to overlay
Changelog (06052016):
Add config for Snap camera app so freezing after photo took was fixed! You do not need anymore to enable HDR mode to fix it.
Add ALAC (Apple Lossless Audio Codec)
Build some audio libs from src
Sync RR sources
Test block-based otapackage
Changelog (05052016):
Remove MmgrClient from device tree (it affect work of RIL so i hope that RIL will become more stable)
Sync RR sources
Use otapackage building (flashable zips) as was suggested by @X AnwarMov Unfortunatly, it still does not block based.
Changelog (04052016):
Merge 6.0.1_r43 branch
Apply all fixes for ROM by RR Team
Add May stagefright patch
Add KeyDisabler from mofd tree
Remove rild.te from sepolicy folder
Changelog (03052016):
Update to RR v5.6.8
Merge 6.0.1_r30 branch
Apply all fixed for ROM by RR Team
Know NEW isues:
Bootanimation is lag a lot. (It is a ROM sources fault)
Changelog (02052016):
ROM:
Add few variables for GPS to BoardConfigCommon.mk
OTA: update device maintainer list in Settings (it looks like OTA is still dead)
Boot:
(apply all changes by @dgadelha)
Update devicenamefix
Add screen lock fix by XDA member vigneshvikky, enabled by default. (REMOVED)
Click to expand...
Click to collapse
Changelog (29042016):
Rom: Add more stuff to overlay for SystemUI. mms, Dialer and Phone.
Boot: disable again Timed Modem Restart for ASUS Zenfone 5/6 RIL by dgadelha
Boot: Change charging animation (while phone is turn off)
Changelog (28042016):
Add more GPS config to overlay
Use latest ramdisk for boot.img from Bitbucket
Changelog (27042016):
Add GpsLocationProvider from stock
Changelog (25042016): (fixed)
A-GPS fixes:
add missing init.gps.rc in ramdisk of boot.img
add missing gps.conf, gpsconfig_HULA.xml and gpsconfig_NoHULA from etc folder.
Old changelogs:
Changelog (24042016):
Push fixes to boot.img to fix battery drain and netwrok lost issues
Use another RIL config in device tree
Delete nfc.te sepolicy (because our device does not have NFC)
SuperUser was fixed so you do not need anymore to flash SuperSU for root
Changelog (23042016):
Few changes in Wi-FI config (i hope that it will fix problem with WI-FI for some users; Please report me is it fixed)
Kernel: update ramdisk and fix charging in offline mode (healthd fix)
Changelog (22042016):
Testing Marshmallow CM13 sepolicy from Asus Zenfone 2
Use Snap app instead of Camera2 app
ota_conf was updated
Changelog (20042016):
Apply my autobrightness fix
Add CMactions
Remove ituxd
Sync CM13 device tree so
Changed Camera app
Fix some RIL behavior
Fix some green bars on video playback
Update CMHW classes
Fix Camera
Changelog (19042016):
Remove underclock (it is useless and making lag)
Problem with headphones on my kernel was fixed
Audio: use asound.conf and audio_policy.conf from stock Lollipop firmware instead of file from Zenfone 2 firmware
Media: use media_codecs.xml from stock Lollipop firmware instead of file from Zenfone 2 firmware
Changelog (18042016):
Enable ituxd for thermal stuff
Add thermal config
Changelog (17042016):
Add ota_conf (trying to enable OTA)
Use another RIL config (trying to fix "com.android.phone was stopped" issue)
Update ramdisk of boot.img
Enable DT2W in boot.img
Add ton governors and i/o stuff + underclock
Changelog (16042016):
Camera was fixed
Problem with SMS was fixed (use android_packages_apps_Messaging from CM13 repo; branch - stable-cm-13.0-ZNH2K)
Rom became stable for daily use. So release version of rom is changed to Stable.
Changelog (14042016):
Delete strings with LTE (Z5 does not support it) from overlay
Trying to use Camera Wrapper from Xiomi MI4 (cm13 branch) - no success
Add init.superuser.rc in kernel ramdisk
Add Asus Flashlight app. This way you can use Flashlight (flash) via this app
Changelog (12042016):
Apply patch for vibrator (pls tell me is it work)
Autobrightness and brightness were fixed.
Size of rom was reduced (this way you will be able to install more stuff with this rom)
Use LP config for camera (it stay dead)
Changelog (11042016):
Initial release

Reserved #2

Wahh luvin' it im waiting for camera fix. Will V4A works in this rom?

Yeah finally RR is back, good job

Uppppp. Thanks

sol212307 said:
Wahh luvin' it im waiting for camera fix. Will V4A works in this rom?
Click to expand...
Click to collapse
What means V4A?

tank0412 said:
What means V4A?
Click to expand...
Click to collapse
Viper4android...just curious cuz selinux is disabled o.o

Thanks. Please fix the camera. Can't wait more.
Sent from my ASUS_T00F using XDA-Developers mobile app

SMS work ? No error ?
Sent from my ASUS_T00F using XDA-Developers mobile app

Oops, i forget to add credits.
Credits goes to @dgadelha (device tree) and @X AnwarMov (TWRP)

adamilmanns said:
SMS work ? No error ?
Sent from my ASUS_T00F using XDA-Developers mobile app
Click to expand...
Click to collapse
Dammed.
It looks like it does not work.

Nice work @tank0412. Keep up man!

tank0412 said:
Dammed.
It looks like it does not work.
Click to expand...
Click to collapse
Link for root dead? Can't find the link

sol212307 said:
Link for root dead? Can't find the link
Click to expand...
Click to collapse
You can get root via Developer Settings because it is a CM-based ROM. xD
I switched to RR due to this.

wow....
Sent from my ASUS_T00J using XDA Free mobile app

good job. Repels only camera and SMS , it is important for me.

Link root??

Phamtung30h said:
Link root??
Click to expand...
Click to collapse
Flash SuperSU via TWRP:
https://drive.google.com/file/d/0B-Fin8UxrD6Pdmkwbnk1aE1YOEk/view

awesome bro, thank you so mush for your hard work
ASUS_T00F cihazımdan Tapatalk kullanılarak gönderildi

[ROM] [7.1.1] [UNOFFICIAL] CyanogenMod 14.1 [Dec 25, 2016]

Disclaimer:
Code:
/*
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Tags:
To avoid confusion with the OFFICIAL CyanogenMod build tags that include Nightly/Developement (every 24 hours, experimental, newest features, unstable) and Snapshot/Release (every 1-2 months, suitable for daily use, devices signed-off by maintainers for inclusion), these UNOFFICIAL builds have three tags:
STABLE: include tested changes and confirmed bug fixes;
are suitable for daily use.
TESTING: include experimental changes to be evaluated and to possibly fix some issues;
may be used as daily driver only if they don't break functionality or introduce new issues.
VZW-ONLY: same as TESTING builds, but support Verizon variant (VZW SM-N910V) only.

Click to expand...
Click to collapse
Changelog:
For the latest changes and bug fixes, check the 2nd post!
Click to expand...
Click to collapse
Status:
This ROM supports all Snapdragon variants, especially US variants (Verizon / VZW SM-N910V, T-Mobile/TMO SM-N910T, Sprint / SPR SM-N910P, and US Cellular / USC SM-N910R4) and Canadian variant (SM-N910W8). This is only possible because I made major changes to the kernel, init, and frameworks/telephony overlays. Moreoever, the vendor proprietary blobs for VZW variant support both CDMA and GSM networks. So, the device name/model and related properties will reflect the VZW base/blobs.
Check the ROM status in the 3rd post!
Click to expand...
Click to collapse
Kernel:
For stability, this ROM uses ~pure Samsung source code for the kernel with carefully cherry-picked commits from CAF MSM 3.10 source code for APQ8084. A few patches are merged to implement some CMHW features. Moreover, driver updates are integrated from the latest Samsung releases.
Base Source Code: SM-N910V_NA_MM_Opensource_N910VVRU2CPD1.zip
Latest Source Code: SM-N910T_NA_MM_Opensource_N910TUVU2EPJ2.zip
Click to expand...
Click to collapse
I'm also contributing to this kernel repo that will be shipped in some builds for extra features.
Click to expand...
Click to collapse
instructions:
Hit THANKS
Make backup
Do a full factory reset
You should wipe the system partition!
Flash ROM + Gapps ARM 7.1
Gapps nano package is recommended!
Enjoy!
Only for international variants (SM-N910F/G):
>>> Flash RIL/QMI fix from the 3rd post, before flashing Gapps.
Click to expand...
Click to collapse
Notes:
Clean flash (wipe system/data/cache/dalvik) is required.
You need to install nano Gapps for ARM SDK 25 (Android 7.1.1 Nougat) .
You may also need to set default Apps and grant special access/permissions.
In Settings/Apps, click the Settings icon and select "Show system" from the 3-dot menu, as needed.
Make sure that your preferred APNs are selected in Settings/Cellular networks.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Downloads:
UNOFFICIAL CyanogenMod 14.1 Builds for Samsung Galaxy Note 4
Click to expand...
Click to collapse
Support:
A voluntary work consumes resources and more importantly time!
If you'd like to support the development, you may donate here:
It's fine to just click THANKS or enjoy without saying anything.
A donation is to show appreciation of the work I have done already.
A donation is not by any means in expectation of future work.
A donation doesn't entitle for preferred/private support/requests.
A donation is meant as a gift - always appreciated, never required.
Click to expand...
Click to collapse
If you couldn't donate, you can hit THANKS :good:
Click to expand...
Click to collapse
XDA:DevDB Information
CyanogenMod 14.1, ROM for the Verizon Samsung Galaxy Note 4
Contributors
hsbadr
Source Code: https://github.com/CyanogenMod
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: N910VVRU2CPJ2
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 14.1-20161225
Stable Release Date: 2016-12-25
Created 2016-11-06
Last Updated 2016-12-25

Changelog
Green dates are for STABLE builds, blue dates are for TESTING builds, and red dates are for VZW-ONLY builds. To learn more about build tags, check OP!
You may find a WIP section on top, for what to expect in the coming build. You could vote for a newer build by hitting THANKS to the announcement post of the latest build. For more details, check ROM status in the 3rd post!
All builds include the upstream CyanogenMod changes.
END OF DEVELOPMENT
25.12.2016:
Cleaned up and updated audio configs
Disabled ERI operator string for non-VZW variants
Enabled TTY mode in Telecomm service
Increased gain for camcorder microphone
Increased gain for other mixer paths
Made time daemon MLS trusted subject
Restored contexts for directories during init
Set proper WiFi and bluetooth power configs
Updated operator info for CDMA variants
Updated SELinux policy and addressed denials
23.12.2016:
Added missing camera parameters
Addressed SELinux denials
Created missing init directories
Enabled gesture settings
Falling back to L3 by removing liboemcrypto
Re-enabled fingerprint wake-and-unlock
Updated init and kernel ramdisk
Updated RIL SHIM library
20.12.2016:
Cleaned up and updated media codecs
Created missing log directories
Defined actions to be executed during/after boot
Disabled camera CPP duplication
Disabled nonexistent media decoders
Disabled unsupported Qualcomm's flags
Enabled telephony IPv6 capability
Enabled the setgid bit on directories created by init
Fixed nandroid restores due to telephony data
GPS: Added android_runtime dependency
GPS: Cleaned up and updated GPS/location configs
GPS: Fixed missing Samsung sec-GPS configs
GPS: Fixed "Use of memory after it is freed" warning
Handled framebuffer hint for Ambient Display
Reverted "Allow Flashlight service to use wakelock"
Moved camera service to run on late start
Set appropriate permissions for time data
Toned down VM BMS logging level
Tuned system properties for graphics performance
Updated camera parameters and sysfs permissions
Updated and cleaned up SHIM libraries
Updated audio features and board flags
Updated graphics framebuffers permissions
Updated kernel cmdline for debugging
Updated QMUX daemon socket permissions
Updated Qualcomm's time services
Updated SELinux policy and addressed denials
Used the default number of surface buffers
15.12.2016:
Addressed SELinux denials
Allowed Flashlight service to use wakelock
Built OMX libraries from source code
Cleaned up media codecs from white spaces
Disabled fingerprint wake-and-unlock
Enabled Qualcomm's DivX video decoders
Enabled Qualcomm's MPEG video decoders
Fixed fingerprint/home wake conflict
Fixed Google Home app crashing
Fixed Google Fit app crashing
Fixed graphics and media configs
Moved qcamerasvr service to main class
Re-configured radio access family
Reduced bootanimation resolution to speed up boot
Restricted ERI for CDMA carriers
Updated init services GIDs
Updated media codecs and profiles
Updated/Restored trlteRIL java class
13.12.2016:
Added support for Substratum theme engine
Added system properties for Perf
Allowed all display rotation angles
Allowed interfaces to get v6 address for tethering
Cleaned up and organized system properties
Cleaned up and updated kernel ramdisk
Cleaned up CellBroadcastReceiver overlays
Cleaned up framework base overlays
Cleaned up SELinux contexts and escaped '.' character
Configured VSYNC phase offsets
Created Telephony Provider symlinks for legacy RIL
CyanogenMod 14.1 (Android 7.1.1 Nougat)
Disabled bluetooth by default
Disabled Qualcomm's location stack
Enabled extended video features
Enabled install non-market apps by default
Enabled IPv4 defrag and rpfilter support
Enabled IPv6 defrag and rpfilter support
Enabled PCM audio offload by default
Enabled SAP sensors for GPS use
Fixed MMS sending failure
Fixed offline charging animation
Fixed unknown phone number
Fixed unknown network / operator
Fixed Widevine DRM SHIM library
Forced reading operator-string from ERI XML
Increased maximum readahead to 512 KB
Increased media volume to 30 steps
Increased voice call volume to 15 steps
Moved ERI configuration files to CarrierConfig
Moved time_daemon service to main class
Removed duplicated system properties
Removed obsolete system properties
Removed old-apns-conf.xml APN list
Removed QTI telephony extension
Removed TelephonyProvider APN overlays
Removed unneeded Contacts overlays
Removed unneeded Keyguard overlays
Removed unneeded Messaging overlays
Removed unneeded Telephony overlays
Restored Samsung proprietary boot classes
Restored Graphics/HWC system properties
Reverted the custom bootanimation
Set correct permissions for tombstones
Set device provisioned by default
Set P2P preferred channel list
Set SELinux label for wifiloader service
Switched to CM charger libhealthd
Switched to unified LED capabilities overlay
Use 3 surface buffers to avoid timing issues
Used alternate ERI XML via init
Used HTTPS for GPS/XTRA2 download
Updated blobs (MMB29M.N910VVRU2CPJ2)
Updated all GPS/location configs
Updated and unified MMS configs
Updated build info from N910VVRU2CPJ2
Updated CarrierConfig overlay for all variants
Updated consumer IR HAL
Updated charging thresholds in uW
Updated doze and ambient display configs
Updated eMBMS configuration parameters
Updated media codecs and profiles
Updated Qualcomm's Adreno GPU drivers
Updated IMS/VoLTE proprietary blobs
Updated IMS/VoLTE system properties
Updated NFCEE access for Android 7.x Nougat
Updated servcies GIDs and SELinux labels
Updated SELinux policy and addressed denials
Updated system properties for audio
Updated system properties for media
Updated thermal-engine SHIM library
Updated vibrator/vibetonz sysfs permissions
26.11.2016:
Enabled proximity check on screen wake
Enabled suspend when screen is off due to proximity
Increased the maximum size for MMS message
Reset MMS user agent string and profile URL
Updated AAPT/DPI configs and system properties
Updated security configs for Android 7.x Nougat
Updated SELinux and addressed denials
kernel: Addressed eMMC 5.0 spec violation
kernel: Disabled MSM DMA test module
kernel: Updated filesystem drivers
kernel: Updated EXT4 driver
kernel: Updated ecryptFS driver
kernel: Updated sdcardFS driver
kernel: Updated MSM camera driver
kernel: Updated MSM GPU driver
kernel: Updated MSM IPA driver
kernel: Updated MSM SoC sound codecs
kernel: Updated MSM SoC sound driver
kernel: Updated network drivers
kernel: Updated QSEECOM driver
kernel: Updated Qualcomm SoC driver
kernel: Updates from the latest source code
25.11.2016:
Added custom telephony plugin
Added support for trltedt (SM-N910G)
Cleaned up CarrierConfig overlays
Cleaned up framework and boot class path
Customized telephony network values
Ported updates from Pixel XL images
Re-added custom bootanimation
Updated Android filesystem config
Updated ramdisk services groups
Updated SELinux policy and addressed denials
Updated SELinux rules for camera
Updated SELinux rules for CMHW/vibrator
21.11.2016:
Disabled Samsung MTP
Fixed unexpected app crashes
Updated CarrierConfig overlays
Updated telephony overlays
Updated vendor proprietary blobs
19.11.2016:
Fixed first/clean boot issues
Fixed media/Youtube audio issues
Fixed speaker and mic for voice calls
Optimized and cleaned up kernel ramdisk
Removed unused CM NFC feature
Reverted the custom bootanimation
Updated SELinux rules for the kernel
Updated filesystem mount options
Updated filesystem manager flags
Updated firmware GID and mount masks
18.11.2016:
Added support for all Snapdragon variants
Added fs_config support for custom binary
Added custom permissions for pm, camera, and IMS
Applied a fix for emergency calls
Enabled reschedule/delay service restarts
Restored audio configs from Touchwiz
Updated media codecs for Nougat
Updated media profiles for Nougat
Updated RIL java class for Nougat
Updated WiFi configs for Nougat
Updated SELinux and addressed denials
Updated SELinux rules for media hacks
Used set_prop to replace deprecated rules
Custom bootanimation by @Creeper36
14.11.2016:
Enabled audio features
Enabled Cell Broadcast settings
Enabled VoLTE bools
Hacked media for legacy blobs
Unified build for all variants
Updated SELinux policy
13.11.2016:
Addressed SELinux denials
Fixed some errors/exceptions
Updated proprietary blobs
12.11.2016:
Addressed SELinux denials
Fixed Widevine DRM
Restored audio effects
Updated media codecs
Updated bluetooth overlays
Updated telephony overlays
10.11.2016:
Preliminary support for other variants
Updated audio configs
Updated bluetooth configs
Updated SELinux policy
Updated kernel source code
November security patches
06.11.2016:
CyanogenMod 14.1 (Android 7.1 Nougat)
[/QUOTE]

ROM Status
Release Date:
No ETA, but you could vote for a newer build by hitting THANKS to the announcement post of the latest build.
END OF DEVELOPMENT
Click to expand...
Click to collapse
Supported Variants:
This ROM fully support US variants:
Verizon / VZW (SM-N910V)
T-Mobile / TMO (SM-N910T)
Sprint / SPR (SM-N910P)
US Cellular / USC (SM-N910R4)
and
Canadian variant (SM-N910W8)
International Snapdragon variants (SM-N910F and SM-N910G) need RIL/QMI fix. This can be done by flashing blobs from the latest firmware (cm-14.1-trltexx-fix_v3.zip) before flashing Gapps.
Nandroid Backup/Restore:
To fix nandroid restores (No SIM and Phone FCs) due to TelephonyProvider data/symlinks for using legacy RIL blobs on newer versions of Android 7.x+, you may wipe TelephonyProvider data by flashing this ZIP directly after restore and before rebooting to system.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Required Firmware:
The latest Android 6.0.1 Marshmallow firmware is required for all variants. Check your device/variant forum for firmware upgrade!
VZW-ONLY:
ROM Firmware Required: N910VVRU2CPJ2
If you're already on unlocked Android 6.0.1 Marshmallow bootloader, you can extract and flash the DevEd partial fimware via Odin to upgrade:
N910VVRU2CPJ2_PartialFirmware_DevEd.tar.md5.7z
This will upgrade the base firmware (NON-HLOS, modem, rpm, sbl1, sdi, and tz) to N910VVRU2CPJ2.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Bug Reports:
All bug reports should be posted here. I'll ignore the posts that don't include appropriate logs. Unfortunately, I don't have the time to respond to the PMs.
Click to expand...
Click to collapse
Q&A:
There's a linked thread for Q&A, general discussions, and pre-/post-installation chat. Please keep this thread clean and post there all your personal issues that are not related to the development such as Xposed, themes, extra mods, other stuff, ... etc.
This thread is only for development, including bug reports with logs. All other topics should be moved to the new thread.
Thank you for collaboration! That's how users could contribute to the development.
Click to expand...
Click to collapse

It's finally here! I'm so excited! Lol as always @hsbadr, thank you so much for all your hard work and dedication for the community! I will be downloading sometime tonight and report back

@hsbadr Thank you for your continued support with our Note 4.

StayingSober said:
It's finally here! I'm so excited! Lol as always @hsbadr, thank you so much for all your hard work and dedication for the community! I will be downloading sometime tonight and report back
Click to expand...
Click to collapse
Extra Virgin said:
@hsbadr Thank you for your continued support with our Note 4.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
The 1st build is now available for download:
http://forum.xda-developers.com/devdb/project/?id=17713#downloads

I have a Note 4 DE - Not Retail
running CyanogenMod Version 13.0-20150525 UNOFICCIAL -trltevzw
Baseband N910VVRU2BOK3
Can I simply flash this from recovery?
THank you for your time!

Definitely be downloading this as it becomes more of a Stable release!
---------- Post added at 04:35 PM ---------- Previous post was at 04:17 PM ----------
plainbum said:
I have a Note 4 DE - Not Retail
running CyanogenMod Version 13.0-20150525 UNOFICCIAL -trltevzw
Baseband N910VVRU2BOK3
Can I simply flash this from recovery?
THank you for your time!
Click to expand...
Click to collapse
I could be wrong, but it does say this:
ROM Firmware Required: N910VVRU2CPG2
Click to expand...
Click to collapse

JOSHSKORN said:
Definitely be downloading this as it becomes more of a Stable release!
---------- Post added at 04:35 PM ---------- Previous post was at 04:17 PM ----------
I could be wrong, but it does say this:
Click to expand...
Click to collapse
I've looked quite a bit and can't seem to find anything on a safe upgrade to CPG2. Do you happen to know where I could find any info on that? Thanks

plainbum said:
I have a Note 4 DE - Not Retail
running CyanogenMod Version 13.0-20150525 UNOFICCIAL -trltevzw
Baseband N910VVRU2BOK3
Can I simply flash this from recovery?
THank you for your time!
Click to expand...
Click to collapse
dhplap said:
I've looked quite a bit and can't seem to find anything on a safe upgrade to CPG2. Do you happen to know where I could find any info on that? Thanks
Click to expand...
Click to collapse
Click to expand...
Click to collapse
ROM Firmware Required: N910VVRU2CPD1/N910VVRU2CPF3/N910VVRU2CPG2

hsbadr said:
ROM Firmware Required: N910VVRU2CPD1/N910VVRU2CPF3/N910VVRU2CPG2
Click to expand...
Click to collapse
Thanks hsbadr! And I also want to say thank you for your continued support on our phones. So after I flash this it would be ok to restore my other marshmallow roms and vise versa? Didn't know since this is Nougat. Really appreciate your time and help.

Oh my god! This is extremely exciting!
I'm going to wait to see how stable it is, since my Note is my daily driver, but I can't wait to flash this.
(Does it support Dual Boot?)

Zacharee1 said:
(Does it support Dual Boot?)
Click to expand...
Click to collapse
I think that'd require the dual partitioning

Bicknasty said:
I think that'd require the dual partitioning
Click to expand...
Click to collapse
Well there's Dual Boot Patcher. If it works with that, I could try it out of without breaking CM13.

@hsbadr, amazing job on the build sir! Everything seems to be running smoothly, first boot took about 10 minutes, and after that I breezed through the setup. Found that the old trick of quickly running your finger over the fingerprint sensor to set up prints worked beautifully. Going to try flashing Xposed here in a bit. I will report any and all FC's, or issues, while also running @chevyrhoads Note 7 port. Thank you!

Zacharee1 said:
Well there's Dual Boot Patcher. If it works with that, I could try it out of without breaking CM13.
Click to expand...
Click to collapse
Ohhh, I misunderstood. I thought you were asking about the Nougat seamless updates thing, and how some had been speculating that the dual-partitioning could be repurposed by developers for a dual-boot paradigm.

bertmag said:
@hsbadr, amazing job on the build sir! Everything seems to be running smoothly, first boot took about 10 minutes, and after that I breezed through the setup. Found that the old trick of quickly running your finger over the fingerprint sensor to set up prints worked beautifully. Going to try flashing Xposed here in a bit. I will report any and all FC's, or issues, while also running @chevyrhoads Note 7 port. Thank you!
Click to expand...
Click to collapse
I'm pretty sure Xposed doesn't work on Nougat http://www.xda-developers.com/rovo89-updates-on-current-status-of-xposed-for-android-nougat/

Get this error when trying to install, upgrading from cm 13

GeoHogan said:
Get this error when trying to install, upgrading from cm 13
Click to expand...
Click to collapse
I'm fairly certain you need to clean flash.

Thanks for making this HS.. Just curious if anyone is using this on TING? It installed fine for me.. but i have no cell connection, And when i goto APN settings it says no settings available for this user. Anyone run into this yet?
Actually it isn't seeing my Sim at all.

[KERNEL] [Q] [G9650] [G9600] klabit kernel

As most of you guys know Magisk will not work for us on the international snapdragon S9 and S9+
So, I have made a custom kernel that will allow us to have root on stock pie firmware.
You will need to format data unless you want to stay encrypted. If you wish to stay encrypted you can.
Files needed:
klabit kernel V6.5
FK Manager g9650 kernel download configuration link
FK Manager g9600 kernel download configuration link
FK Manager g9650 GSI kernel download configuration link
FK Manager g9600 GSI kernel download configuration link
Copy the g96x0_q_vx.zip to your external sd card.
Make sure you have TWRP installed
Flash the g96x0_q_vx.zip
Flash Magisk
Reboot to system.
If you currently do not have a working lockscreen/pin/fingerprint setup, you will need to restore your stock boot.img either via backup or extract your boot.img from the official firmware and flash the img then flash my kernel.
Changelog:
Code:
V6.5
[LIST]
Merge OSRC: N9600ZHU5FTK1
[/LIST]
V6.4
[LIST]
Merge OSRC: G9650ZHS6DTG2
Merge OSRC: G9650ZHS7ETH1
Remove additinal SafetyNet flags from /proc/cmdline
Proc: Fake CMDline
Merge OSRC: G9650ZHU7ETI3
Merge OSRC: G9650ZHU7ETJ2
Expanded GSI kernel compatibility for Android 11 support
[/LIST]
V6.3
[LIST]
Merge OSRC: G9650ZHS6DTF1
Merge OSRC: G9650ZCU6ETF6
[/LIST]
V6.2
[LIST]
Merge OSRC: G9650ZCS6DTD5
[/LIST]
V6.1
[LIST]
Add powersave governor
Add conservative governor
Add ondemand governor
[/LIST]
V6.0
[LIST]
[*]7e123dad108c Import crownqlte && starqlte defconfigs
[*]824f70f8d070 Add .gitignore
[*]7d3612a88cbf Import G9600 and N9600 defconfig && initialize
[*]c1e7a35e59a7 Import G9600 and N9600 dts with verity removed
[*]0a587fae1745 Add option for gsi mtp driver
[*]10b851dfaa03 star2qlte: Initialize defconfig
[*]5f38f4cc0d99 Remove verity
[*]101dedaf7aec scripts: remove localversion + from kernel version strings
[*]c1b726584344 selinux: enable selinux faking
[*]70ed91e9c15a star2qltechn: Enable Samsung MTP driver
[*]9c88019d96fd drivers: usb: add separated Samsung MTP option
[*]6c54f88a648b star2qltechn: Update defconfig
[*]13a223ea3ed9 dts: disable avb,verify
[*]5c36fed8d37b Regen configs
[*]9a37c1921037 (osrc) OSRC: G9650ZCU6DTA9
[/LIST]
V5.9
- Small version bump to 5.9.
- Integrate auto patch of security patch date since Samsung slow af. (Credit to [user=4280397]@djb77[/user])
- Better GSI compatibility.
- Better OneUI compatibility for recent/most up-to-date firmwares.
V5.8
- Fix compilation issue for n9600
- Version update to V5.8
- Add changelog
- Update crownqlte defconfig
- OSRC: G9650ZCU6CSJ2
- Merge SM-N9600 defconfig and dts
V5.7
- Merge G9650ZHU5CSH6 source which includes fix for the recent zero day on android binder driver
- Prevents potential wake-lock while on wireless charger
- Merge G9650ZCU5CSI3 source which includes some Note9 camera integrations
- Adds support for wireless adapters based on Broadcom 43436 chipset
- Increased wifi security
- Increased wifi hotspot security
- DHD 100.13.36.1 - 2019.07.31
Security Patch
- CS8424803(By Choi Hyeonu) SI-14869: Moved the length check routine for the nlioc variable before accessing it in the wl_cfgvendor_priv_string_handler() function
DHD 100.13.36 - 2019.05.24
New Feature
- CS5350346(By Jung Junyeop) Fake AP - Fixed to provide correct channel information for beacon receive result
- Enable to support Fake AP
(This patch should be sync up with FW 13.38.60(4361B0), FW 13.50.10(4361B2) or higher version)
- WIPS attack warning reporting
(This patch should be sync up with FW 13.38.60(4361B0), FW 13.50.10(4361B2) or higher version)
Security Patch
- CS8069399(By Kang Hyung Wook) SI-13926 Fixed use-after-free in the wl_cfg80211_set_mgmt_vndr_ies function
Others
- CS7939107(By Kim Tae-Yong) Included memdump value prints in the dump information
- Added missing options into the Kconfig file
DHD 100.13.32 - 2019.04.26
Kernel Panic
- CS7696936(By Min SungBin) Fix misspelling of CUSTOMER_HW4_DEBUG definition
- CS7706946(By Min SungBin) Fixed to avoid kernel panic due to race condition of cfg->scan_request
Security Patch
- CS7860687(By Kang Hyung Wook) SI-12455: Fixed use-after-free write in dhd_set_monitor() function
- CS7949699(By Choi Hyeonu) SI-14074: Fixed Security issue, Potential stack-based buffer overflow in dhd_pktfilter_offload_set
- CS7956197(By Choi Hyeonu) SI-14130: Fixed the multiple NULL pointer dereference in wl_cfgvendor.c
Others
- CS6844193(By MinSoo Kim) Changed log level of LQCM report
- CS7099653(By Nitesh Suthar) Enabled frameburst to enhance throughput for BCM43436 projects
- CS7362375(By Gu Ja Heon) Added Private command in order to receive every beacon in Suspend
- CS7526157(By Suthar Nitesh) Fixed DualBandConcurrency field in .softap.info
- CS7765577(By Park Heebae) Wifi-on time reduction by reading necessary CIS information
- CS7827257(By Choi Hyeonu) Fixed kernel panic caused by invalid memory access
- CS7834653(By Kang MinHo) Removed redundant TX error prints during suspend in SDIO
- CS7884436(By Beom Jip Kim) Fixed to cancel p2p listen offloading by framework scan request
- CS7892037(By Sun Yinghan) Fixed to support W2018/KELLY Android P OS upgrade
DHD 100.13.31.1 - 2019.04.19
Others
- CS4726130(By Min Hyun-Ki) Added User priority to AC mapping in case of various DSCP types that may not compatible with RFC8325
- CS6951980(By Min Hyun-Ki) Changed the UP to AC mapping of CS6 based on the RFC8325
DHD 100.13.31 - 2019.02.15
Others
- CS7241767(By LEE EONJI) Added more logs for the DPC schedule error debugging
- CS7299641(By Kim MinSoo) Enabled LB_TXP for MSM8998 Platform
- CS7323375(By kwon Jaecheol) Enabled the softap.info file support in BCM4359 platform
- CS7362527(By Hyeonu Choi) Cancel P2P listen offloading operation when SoftAP brings up
- CS7363197(By Junhak Lim) Fixed prevent issues
- CS7386068(By Lee Gibum) Disabled frameburst for "2.4Ghz + SoftAP" (Drame & Great projects)
- Fixed the scan failure when p2p listen offload is triggered
- Fixed to abort scan when connection/disconnection requested
- Prevented the bus suspend by the PCIe Runtime PM from abnormal ISR status
V5.5
- Merge G9650ZHU5CSG8 source which includes some stock Samsung debugging sanity checks and increase of stability
- Prevent possible IO/wake-locks when accessing sdcard
V5.4
- Merge G9650ZCU5CSFB source which includes additional ethernet support and additional battery stats support
- Removed more verity from the appended dtb
- Finally fixed FK Manager compatibility!! (ie no longer need to reflash Magisk)
V5.3
- Added Conservative gov for G9600 (sorry I could have sworn I included this in V5.2)
- Fix stability issues
- Remove Interactive governor
V5
- Removed Defex
- Removed Samsung rooting protections
- Removed RKP (Realtime Kernel Protection)
- Added Conservative cpu governor
- Sanity checks for video drivers and the power share feature
- Added support for broadcom 43456 wireless cards
- Added ddhd random mac scanning
- Added more security to wifi hotspot to protect from ARP attacks,
- CS7111512(By LEE EONJI) Detect turn on failure in factory binary
- CS7299329(By Kim Yu-Kyoung) Fixed SoftAP CTS fail due to interface creation failure
- Blocked WLC_E_ROAM event to fix wakes-up frequently under weak signal AP
- Changed error results of GETSTAINFO private command to BCME_UNSUPPORTED if the BIGDATA_SOFTAP is not supported
- Fixed kernel panic during mfg mode interface creation
- CS7091164(By Kang Hyung Wook) SI-13561: Fixed kernel heap overflow security issue at dhdpcie_downloadvars
- CS7091371(By Kang Hyung Wook) SI-13584: Fixed kernel panic due to access to not allocated memory
- CS6785460(By Jeong Min Cheol) Send HANG event to the framework for the sequential private command failure
- CS7003600(By Kang MinHo) Support android private command for restoring roam/scan parameters
- CS7094302(By Yoon YeJi) Fixed connect failure caused by connection information not initialized
- CS7103552(By LEE EONJI) Fixed the recovery routine to fix the D3_ACK timeout issue
- CS7119174(By Kim Seong Hwan) Avoid HANG event indication due to sequential private command failures in case of unsupported error
- CS7137399(By Yoon YeJi) Fixed connect failure caused by connection information not initialized
- CS7141596(By Suthar Nitesh) Fixed MHS operates with STA mac address
- Control HANG report for consecutive Android private command failure by sysfs
- Increased the NUMBER_SEQUENTIAL_PRIVCMD_ERRORS from 4 to 7
- Taking a SOCRAM dump in the sequential private command error case
- CS6935603(By Hong Min Whoa) SI-13638: Fixed Kernel warning message by restructuring the DMA_LOCK and DMA_UNLOCK
- CS7091347(By Kang Hyung Wook) SI-13585: Fixed kernel panic due to write buffer exceeds the size
- CS6650676(YeJi Yoon) Fixed mismatch connect status between framework and DHD
- CS6678972(By Hwang MinSik) Fixed TIS/TRP test failure and high current issue from sysfs change
- CS6715508(By Choi Hyeonu) Exported sysfs for ADPS bad AP list
- CS6744438(By Yoon Jae Ho) Fixed duplicated roaming notification to WPA supplicant during FT roaming
- CS6769798(By Kim Beom Jip) Fixed for GraceR/4359c0 P OS P2P connection failure issue
- CS6856753(By kwon Jaecheol) Added the dual interface capability filed in the SoftAP info file (.softap.info)
- CS6870793(By Tae-Yong Kim) Fixed prevent issues
- CS6871138(By Lee Gibum) Configure AER registers to debug PCIE ERROR ATTN issues
- CS6880409(By Sung-gi Choi) Fixed prevent issues
- CS6887298(By Min Whoa Hong) Fixed prevent issues
- CS6928243(By Sung-gi Choi) Fixed prevent issues
- CS6935678(By Hwang MinSik) Fixed array out of bound issue from sysfs mac address
- CS6984743(By Min SungBin) Print DPC schedule request timestamp for ROT issue
- CS6985032(By LEE EONJI) Enabled DHD_RECOVER_TIMEOUT for D3_ACK missing case on 4359C0 and 4361B0
- CS6993967(By Jeong Min Cheol) Added last_d3_inform_timestamp to check root cause of ROT
- CS7042030(By Min SungBin) Implemented the new API to sync up the status between RC and EP to avoid unwanted L1ss configuration
- Changed the DHD_COMMON_DUMP_PATH for non-BCM4375 Android P OS projects
- DHD driven random mac enable by default for 4361B0
- Enable frameburst for standalone 2.4GHz SoftAP on Dream and Great project
- Wi-Fi Sharing-Lite feature support for Android P OS
- CS6461136(By Min SungBin) Fixed for kernel panic due to stack overflow at get_roamscan_channel_list()
- CS6302259(By Kang Hyung Wook) Supported DHD driven Random MAC feature
- CS6324532(By Choi Hyeonu) Port files under /data/vendor/conn to sysfs after Android P OS
- CS6396705(By Min SungBin) Added additional timestamp log to debug resumed on timeout issue
- CS6398346(By Hyeonu Choi) Fixed prevent issues
- CS6516071(By Choi Hyeonu) Fixed for corner case of schedule_timeout() API at dhd_timeout_expired()
- CS6536174(By Choi Hyeonu) CS6433018(By Choi Hyeonu) Fixed prevent issues
- CS6594869(By Min SungBin) Triggering Kernel panic for the scheduling problem only if the memdump mode is enabled
- CS6600348(By LEE EONJI) Implemented 4359c0/GraceR P OS Wi-Fi sharing feature
- CS6658253(By Choi Hyeonu) Fixed random mac setting issue instead of otp mac
- CS6678972(By Hwang MinSik) Fixed TIS/TRP test failure and high current issue from sysfs change
- CS6713692(By Kim MinSoo) Fixed NET_RX delay issue
- CS6769798(By Kim Beom Jip) Fixed for GraceR/4359c0 P OS P2P connection failure issue
- CS6791516(By Lee Gibum) Fixed the unexpected frameburst enable on standalone SoftAP in 2GHz
- CS6791556(By Hwang MinSik) Removed CR/LF character at .cid.info including sysfs
- CS6809444(By Hwang MinSik) Unified DHD_COMMON_DUMP_PATH for the Android P OS project of all chips
- Changed the timestamp value to Kernel local time to debug resumed on timeout and scan timeout issues
- Defer RxBuf post size based on the rxbufpost_sz iovar return value for monitor mode
- Disabled DHD_LB_IRQSET for Exynos8890 platform
- Dump AER HeaderLog registers in configuration space for PCIe debugging
- Dumping PCIe registers for PCIe debugging enhancement
- Fixed VHT features enable issue from GraceR project
- Fixed unexpected RSDB mode configuration for legacy RSDB chip
- Implemented the debug code to check if the scan timeout or resumed on timeout happens due to the DPC scheduling problem
- Refined TDLS initialization code
Kernel source: https://github.com/klabit87/android_kernel_samsung_sdm845
Thanks to @tylerhole and the @stang5litre test group for testing anything I throw at them!
Thanks to @djb77 for the ramdisk patches
You guys are the best!

Hell yeah bro! Kickin ass and takin names as per usual! Killer job! Thanks!

very good, I has test it,OK, work fine.
I want to know how to modify the kernel configuration file.
.

Oh God! Thank you teacher, really thank you, you have taken our terminal to another level, God bless. I hope you will continue with us a lot longer. Greetings.

i loaded TWRP from Travis82 , got stuck un a bootloop screen from twrp.

franc33s said:
i loaded TWRP from Travis82 , got stuck un a bootloop screen from twrp.
Click to expand...
Click to collapse
How long did you wait? You will need to wait for 10-12 minutes and it will boot. I tested this multiple times myself and others as well before I released it here.
Sent from my Pixel 2 XL using Tapatalk

tomatolei said:
very good, I has test it,OK, work fine.
I want to know how to modify the kernel configuration file.
.
Click to expand...
Click to collapse
Check my GitHub. The source is linked at the bottom of the op. I'm working on updating sources for TWRP as well.
Sent from my Pixel 2 XL using Tapatalk

franc33s said:
i loaded TWRP from Travis82 , got stuck un a bootloop screen from twrp.
Click to expand...
Click to collapse
I bet your phone was connected to the computer. Travis TWRP causes reboots when plugged in which is why we dont use it.
stang5litre 5.0 Edition Roms

klabit87 said:
How long did you wait? You will need to wait for 10-12 minutes and it will boot. I tested this multiple times myself and others as well before I released it here.
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
ohh so the bootloop should be normal for 10 to 12 minutes? tough it would be stuck on the samsung bootscreen for those minutes, im goint to try again then.
---------- Post added at 04:13 PM ---------- Previous post was at 04:12 PM ----------
stang5litre said:
I bet your phone was connected to the computer. Travis TWRP causes reboots when plugged in which is why we dont use it.
stang5litre 5.0 Edition Roms
Click to expand...
Click to collapse
with one should i use then?

I did the steps as you indicated them and when restarting (for the second time) in TRWP I can not access the internal storage and I have encryption, what do you suggest doing? by others it works normally, I have a successful ROOT.
NOTE: the steps that I followed were the following:
1 flash zip root foot, from external memory
2.- format data (yes)
3.- reboot
4.- Again reboot
5.- again restart, but now in twrp.

franc33s said:
ohh so the bootloop should be normal for 10 to 12 minutes? tough it would be stuck on the samsung bootscreen for those minutes, im goint to try again then.
---------- Post added at 04:13 PM ---------- Previous post was at 04:12 PM ----------
with one should i use then?
Click to expand...
Click to collapse
I would use @klabit87 TWRP as it doesn't have that issue. Its posted in his thread

stang5litre said:
I would use @klabit87 TWRP as it doesn't have that issue. Its posted in his thread
Click to expand...
Click to collapse
the problem with the twrp of klabit87 is that it does not recognize mtp, and that option is very useful when the device does not turn on and you want to extract your data and thus format the system, or is it already working?

stang5litre said:
I would use @klabit87 TWRP as it doesn't have that issue. Its posted in his thread
Click to expand...
Click to collapse
so the one he did for the note 9? should work without any problems?

chalofito said:
the problem with the twrp of klabit87 is that it does not recognize mtp, and that option is very useful when the device does not turn on and you want to extract your data and thus format the system, or is it already working?
Click to expand...
Click to collapse
Travis doesn't either. His reboots with computer connected to phone klabits doesnt, so not sure what your missing ?
stang5litre 5.0 Edition Roms

stang5litre said:
Travis doesn't either. His reboots with computer connected to phone klabits doesnt, so not sure what your missing ?
stang5litre 5.0 Edition Roms
Click to expand...
Click to collapse
travis twrp does it, you just have to deactivate and activate mtp and connect without problem, but that's not the problem, my problem is that I can not access internal storage, and I can not flash anything, it tells me that it has not been mounted data , and create me I do the steps that klabit mentions for the root on android pie. please help me.

franc33s said:
so the one he did for the note 9? should work without any problems?
Click to expand...
Click to collapse
No. do not use the one for Note 9.
I have a twrp on my afh. I didnt make it public because it is not complete since mtp doesnt work. But others found it so whatever.
chalofito said:
travis twrp does it, you just have to deactivate and activate mtp and connect without problem, but that's not the problem, my problem is that I can not access internal storage, and I can not flash anything, it tells me that it has not been mounted data , and create me I do the steps that klabit mentions for the root on android pie. please help me.
Click to expand...
Click to collapse
Your internal storage is encrypted currently. I will work on decryption in a bit. but until then use your microsdcard and be patient.
I plan to update twrp with pie sources and make sure that mtp and adb are working properly.

klabit87 said:
Your internal storage is encrypted currently. I will work on decryption in a bit. but until then use your microsdcard and be patient.
I plan to update twrp with pie sources and make sure that mtp and adb are working properly.
Click to expand...
Click to collapse
Thanks was all I wanted to know, gladly I hope, for the moment I will install the firmware more root, since I thought that the problem was me and I was doing something wrong. Greetings.:highfive:

klabit87 said:
No. do not use the one for Note 9.
I have a twrp on my afh. I didnt make it public because it is not complete since mtp doesnt work. But others found it so whatever.
can you send me it?
Click to expand...
Click to collapse

franc33s said:
klabit87 said:
No. do not use the one for Note 9.
I have a twrp on my afh. I didnt make it public because it is not complete since mtp doesnt work. But others found it so whatever.
can you send me it?
Click to expand...
Click to collapse
As i believe it was stated before, mtp does not work on this one but adb does and it does not reboot instantly if you are plugged into your pc.
https://forum.xda-developers.com/showpost.php?p=78571048&postcount=143
Click to expand...
Click to collapse

stang5litre said:
I would use @klabit87 TWRP as it doesn't have that issue. Its posted in his thread
Click to expand...
Click to collapse
Isn't his twrp only for g9650?

[module] pixelarity

PIXELARITYPIXELARITY contains pixel exclusives, fix and tweaks to boost user experience on devices running Android 9/10
Compatibility
Android 9
Android 10
Magisk 19+
List of Not Supported
Pixel Experience ROM
Huawei and Samsung Devices
Notes
For Those Having Problems Regarding Bootanimation You Can Manually Rename The Bootanimation To Work
For A/B Devices
Navigate to /system_root/system/product/media/
Rename bootanimation-dark.zip to bootanimation.zip
Replace existing bootanimation.zip with the renamed file
Reboot
For A-Only Devices
Navigate to /system/product/media
Rename bootanimation-dark.zip to bootanimation.zip
Replace existing bootanimation.zip with the renamed file
Reboot
Instructions
Download and install the module
Choose using vol keys
Reboot after you finished installing
Changelog
v3.8
HOTFIX
Fixed Module Installation
Cleanup
Code Optimization
v3.7
Bug Fixes and Improvements
Updated Props
Fixed SafetyNet
Fixed Status Bar Padding on Some Android 10 Devices
Mini Cleanup
v3.6
Bug Fixes and Improvements
Merged Props from QP1A.190711.020 for Android 10
Added Easle Services
Updated Bootanimation
Updated Perms
Fixed Force Close Google App from Android 9 ROMs
Fixed Bootloop When Uninstalling the Module
Removed Scone & Tips for Android 9
Enhanced Safety Parameters for Confirmed Not Suppoted Phones/R̶O̶M̶
Negates Samsung, Huawei Devices
N̶e̶g̶a̶t̶e̶s̶ ̶M̶e̶m̶e̶u̶i̶ ̶R̶O̶M̶
Major Cleanup
v3.5
Stability and Improvements
Fixed Android 9 Compatibility
Fixed Mi 8 SE Overlay
Added Scone and Tips
Removed Force Mount (RW) on AB Devices
Removed Overlays for Android 9 ROMs
Updated Perms
Updated Props
Updated Overlays
Moved Gaming Mode & Sound Mod to a Separate Moodule
Renewed Module Build ID for Faster Tracking
Cleanup
v3.4
Major Bug fixes
Fixed Module Installation with FDE, LKT & NFS (Can be used with PIXELARITY now)
Fixed Soundfx with DTS & ViPER (Can be used with PIXELARITY now)
Added Option for Fonts
Adjusted Gaming Mode Tweak Values
Cleanup
v3.3
General
Gaming Mode
Improved Memory Management
Disabled CPU/GPU Thermal Throttling
Fast Charge Enabled
VFS Cache Pressure Set to 150
Adjusted Entropy Values
More...
Reverted Fonts From Build 31114 with Fixes
Fixed Mic Issues
Fixed Static Sounds (Report if your phone still have crackling noise)
Fixed Signal Drop
Fixed Asus Sound Issues
Fixed Padding on Notched Phones
Fixed In-Call Audio Mi 9 SE
Initial Support for All Devices on Q GSIs and Pie ROMs (Except Pixels)
Improved Haptic Feedback
Improved Network Connectivity
Updated Overlays
Corrected Pie Props
Removed OTA Certs
Added Config to Enable Max Resolution Videos
Mini Cleanup
Module
Fixed Mount on A/B Devices
Added Device Restrictions (Pixel Phones Wont be Installing the Module Anymore)
Renewed ASCII Art (To make it readable on recovery)
Rewrite Code in More Efficient Way
Updated and Moved Notes in Front of README.md
Added Choice Not To Change Bootanimation
Switched Thermal Verification (Now vol
cancel thermal disabling, helpful to set default on legacy device)
v3.2
General
Added Q Easter Egg
Merged Props From QPP6.190730.005
Revert Fonts From Build 31000
Fixed Unreadable Characters
Fixed Dark Bootanimation Thanks to SpeedoWBT
Fixed Application of Bootanimation on A/B Devices
Disable GPU Throttle
Optimized GPU
Optimized CPU
Removed OBB Fix
Cleanups
Lavender / Violet
Fixed Bootloop When Disabling Thermals
Beryllium
Fixed BT Sounds When Thermals Disabled
Fixed Content Padding
Removed New Assistant Gesture Animation
Dropped Statusbar Fixes
Wayne / Jasmine Sprout
Initial Support
Adjusted Device Default Content Padding (Requested)
Sirius
Initial Support
Module
Get Exact Device Model
Updated Module Description
Improved Scripts
Fixed Misspelled Content
Added Support For Generic GSI
Added GNU Public License v3.0
Added Support For Jasmine Sprout, Wayne, and Sirius
Added Choice Whether Dark or Light Bootanimation to be Installed
v3.1
General
Added OBB Fix
Added Option to Disabe Thermals
Updated Fonts
Updated Props
Whyred
Removed Camera Libs
Revert Perf Profile (will be installed only if KangarooX detected)
Lavender / Violet
Fixed Status Bar Height
Fixed Content Padding
Fixed Safety Net
Beryllium
Fixed Status Bar Height
v3.0
General
Updated Fonts
Updated Overlays
Prioritize SBC Over AAC
Removed Thermals
Removed Perf Profiles
Removed NFC XMLs (Finally found causing battery drain)
Props Cleanups
Lavender / Violet
Fixed Status Bar Padding
Added New Google Assistant Gesture Animation
Beryllium
Added New Google Assistant Gesture Animation
Module
Add Lavender, Violet and Beryllium Support
Add ROM Check Function
v2.9
General
Fixed Pixel Style Rounded Corners cant apply other SystemUI Mod
Fixed Low In-Call Audio
Fixed Heating Issues
Updated Wlan Configs
Updated Sound Trigger & Mixer Paths
Updated Thermals
Updated Audio Libs
Updated Font
Updated Props
Set IME Height Ratio to 1
Added Overlays from Bonito
Added Adblock Hosts
Added Daydream Support
Added Graphics Lib from MIUI
GPU Tune-Up
Cleanups
Module
Fixed Module Installation now you can just flash over the old module
All New ASCII Art ᕙ(＠°▽°＠)ᕗ
Used TAR.XZ Compression Format to reduce file size significantly
Preparation for Lavender and Beryllium
v2.8
Fixed Random Reboot and System UI Crash on Whyred Default
Fixed In-Call whereby cant Turn Off Loudspeaker
Fixed No In-Call Audio
Fixed Stutters in Earpiece Speaker
Updated Props
Set Google Sans as System Wide Font
Set Wlan Scan Interval to 180
Improved Audio Experience
Improved Gesture Animations
Improved User Interface FPS
Improved Mic Quality
Performance Improvements
Return of Pixel Style Rounded Corners
Cleanups
v2.5
Fixed SafetyNet Issues Thanks to Alex
Fixed Initail In-Call Audio
Fixed "Ok, Google" and Gboard Voice Input Now Works Simultaneously
Fixed Heating Issues
Added Thermals from Srfarias
Updated Props
v2.0
Removed VR Maps
Changed Thermal Values
Fixed Wifi Not Detecting 5Ghz Band
Added Wifi Boost
Added New Assistant Gesture Animation to Whyred Default Mod
Set 30px Rounded Corners to Whyred Default Mod
v1.5.2
Updated Props
Reduced Module Size Significantly
Added New Thermals
Added Camera Patch from Nhappymann
Added Smart Replies
Added Patch to Gboard to have Faster Offline Voice Recognition
Fixed "Ok, Google" Detection Thanks to Alex
Removed Ambient Sense (Not Working)
Removed Dream Liner (Useless)
Removed Pixel Tips (Useless)
Removed Easle Services (Crashing)
Removed Scone (Crashing)
Changed Rounded Corner From 80px to 70px
v1.0
Initial Release
Credits
Gabriel Howard and Pix3lify Devs for my inspiration / motivation to create the module
Master Jaymin and Master Skittles for answering my noob questions
Master Fawkes for helping me to solve anything
Zackptg5 for Unity template
topjohnwu for Magisk
All of Telegram Friends that helps me bring up PIXELARITY
LIKED MY WORK? DONATE VIA PAYPAL

After the installation I got stuck in the boot animation, I can't even turn off the device anymore. Any idea?
Nokia 8

tyrean said:
After the installation I got stuck in the boot animation, I can't even turn off the device anymore. Any idea?
Nokia 8
Click to expand...
Click to collapse
What's your rom?
To uninstall reflash module on recovery to uninstall.

Kyliekyler said:
Reflash module on recovery to uninstall
Click to expand...
Click to collapse
I'd love to, but I'm stuck in the boot animation and can't turn off the smartphone or get it to do anything.
Solved!

Pixel 3 XL?
Should this installed on a Pixel 3 xl? And what is the purpose of the module?

hawki said:
Should this installed on a Pixel 3 xl? And what is the purpose of the module?
Click to expand...
Click to collapse
I also have no clue what this module actually does. The description is really vague.

hawki said:
Should this installed on a Pixel 3 xl? And what is the purpose of the module?
Click to expand...
Click to collapse
Uhm this module blocks pixels from installing, I forgot to add on list of unsupported.

moosefist said:
I also have no clue what this module actually does. The description is really vague.
Click to expand...
Click to collapse
Sorry but this only add pixel exclusives which includes:
Easle services
Tips
Scone
AR/VR Support
Gboard (Pixel Style)
QS Battery Estimate (If they're not appearing on Android 10)
Black theme (Android 9 but ROM dependent)
Padding fixes (Android 10 device specific)
Overall smoothness

Kyliekyler said:
Sorry but this only add pixel exclusives which includes:
Easle services
Tips
Scone
AR/VR Support
Gboard (Pixel Style)
QS Battery Estimate (If they're not appearing on Android 10)
Black theme (Android 9 but ROM dependent)
Padding fixes (Android 10 device specific)
Overall smoothness
Click to expand...
Click to collapse
Thank you for the description! Where did you pull the gboard from?
Also this module causes a bootloop on OnePlus 7 Pro running the latest android Q OOS

Do I need magisk to flash this......or flashing with twrp will do??

Aruss5 said:
Do I need magisk to flash this......or flashing with twrp will do??
Click to expand...
Click to collapse
Youu can flash it on twrp but u need magisk to be installed first

hawki said:
Should this installed on a Pixel 3 xl? And what is the purpose of the module?
Click to expand...
Click to collapse
This can't be installed on Pixel devices, sorry for vague description

eqbirvin said:
Thank you for the description! Where did you pull the gboard from?
Also this module causes a bootloop on OnePlus 7 Pro running the latest android Q OOS
Click to expand...
Click to collapse
Gboard can be pulled using props. Bootloop is a problem, if u can help me solve the bug, I would really appreciate it.

Oneplus 6T bootloop as well Lineage 17.0

mattish.91 said:
Oneplus 6T bootloop as well Lineage 17.0
Click to expand...
Click to collapse
I think the module isnt compatible with oneplus devices, there were enough reports of bootloop

Kyliekyler said:
I think the module isnt compatible with oneplus devices, there were enough reports of bootloop
Click to expand...
Click to collapse
Works great with my OnePlus 5

Thanks for your work on this useful module.
I use this on my Zenfone 5Z to get Safetynet/GPay working. Also gave me the ability to use my Google assistant hotword when my screen is off.
Although when this module is active, I lose access to my AUX camera. Editing my vendor/build.prop does not help (specifically editing the vendor.camera.aux.packagelist property). Uninstalling the module gives me back access to AUX camera in all camera apps.
Is there a way I can get around this? Seems like my actual build.prop values are being ignored, thus vendor.camera.aux.packagelist is not set and my camera apps aren't granted access to AUX camera. Any thoughts?
EDIT: I found the config files pixelarity9 and 10 under /common. After editing the values in there, AUX camera now works :good:
EDIT 2: Apparently this completely breaks BlueTooth for the Zenfone 5z

I've been trying to install this on my Nexus 7 2013 (running Pie-AOSP Extended). After a successful install, my Nexus 7 (2013) will not boot; uninstalling it in recovery returns my N7 2013 to working order. Pix3lify seems to work fine, but I'm stuck with another Boot Animation.
Works fine on my Nexus 6 (running Pie-AOSP Extended) with no issues, and I had both Pixelarity and Pix3lify installed there. What am I missing to get this working on my Nexus 7 2013? Running Magisk 19.4 on both Nexus 7 and Nexus 6.

Struck on Boot logo. Had to recover from TWRP. [emoji3525]
Sent from my GM1911 using Tapatalk

Anyone get this to work on one plus 7 pro on Android 10?

[ROM][10.0][OneUI 2.5][G930X/G935X/N930X/N935X]FloydQ V7.0

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to Floyd Q Port For the Exynos8890 Series
Some information you should know..
This is a full Galaxy Note9 port with Android version 10.0 / Oneui 2.5
This ROM is made with heavy collaboration from @corsicanu make sure to give him coffee
Read the instructions and the F.A.Q Before installing the rom or posting a reply As there are critical information in there!.
You are not allowed to use this base, aroma, or any parts of it for your own "ROM". if you want to make a Q port, "DIY"
Any sort of Kanging will be reported without hesitation.
If you like this rom and appreciate my efforts, Hit the Thanks button, and consider a donation
Submitting new issues/Requests
First read existing issues and the F.A.Q Below to ensure its not a duplicate
Properly report issues by Submitting an issue on GitHub
provide as much info as possible so the issue is not ignored / closed
V7.0 Release Notes :-
Its only fitting to release V7 in July isn't it. The ROM is 2 years old and still has an active following which blows my mind. id like to say thanks to all the users for your support all this time, and especially a big thanks to the testing team who stuck by me for this long.
Between my university, life and other projects, i haven't had consistent time to work on the ROM, i have updated it to the latest note 9 release (which is the last one by samsung) with May 2022 Security patch. Ive done some work on the kernel and base to remove some of the issues caused in V6, added a bunch of new fixes we gathered over time and from the note 8 Q project. and just overall tidy up the ROM, there is still some work left to do, but i dont want to delay V7 any further, if/when we do another version, it will contain more experimental fixes that didn't make it here.
I have done some changes to audio, which may be better or worse on the long run, hopefully to the better, the rom only had couple months of testing with a very small test group, so i wouldn't say its bullet proof. RAM, Camera Audio and overall stability has been worked on, and hopefully this reflects in real usage. ive only used the S7 to play a couple games and use some social media, as it is not my daily driver.
So far the black screen / alarm issue has not been commonly reported, neither did audio muting, however i cant rule out that it was fully fixed until it is tested by much more people. incase you still face these issues, open new reports on github
Overall i hope this new version works better for everyone, we reached the peak of what we can fix back in V6 and that was quite underwhelming, so hopefully with this new release Exynos8890 gets a new lease on life, atleast when it comes to OneUI
And no, i do not think we will ever see a OneUI 3 public release, it is simply too buggy to even look at.
Thanks everyone for your continuous support throughout the years.
V6.0 Release Notes :-
Its been 5 months since the last release, i expected the popularity of this rom to go down and vanish. however, 30 thousand downloads later, i think it is time to push another update. perhaps the last Q update. i dont know what more i can improve in this rom.
This release comes with a ton of significant fixes in every direction, be sure to read the changelog as it covers everything. all the way from stability, to muting to performance was adjusted.
EIS (Video stabilization) has also been enabled and fixed in this release
as mentioned, i am not sure what more can be done to make Q better, right now we are down to basically near impossible to fix errors. the overall experience is great with the stock kernel. and basically future versions might not carry big changelists anymore, and only basic rebases. however ive proven my self wrong many times before so lets wait and see
Make sure to check the F.A.Q if you still face muting. so far its frequency dropped significantly where i think it is as good as it gets
P.S : Majority of the fixes are kernel sided, Do not change kernels until they are updated with new fixes
V5.0 Release Notes :-
Alright, Finally. This release was a bit rough due to the immense changes in 2.5 and how late firmware took to be released.
I hope you enjoy this release, A LOT has been changed, and alot of bugs has been resolved both directly and indirectly
Some bugs like Audio muting and overnight crash never occured under testing, so they might be resolved too, however i will not rule that unless public reviews come in.
Id like to give a big shoutout to the testers group who has been at work for over 3 weeks hard testing this release
Another thing to mention is, i had to remove DeX Wireless mode for being too unstable. so sadly you guys wont get it in this release.
i don't know if its fixable, but that's a problem for another day
The F.A.Q as always has been updated to reflect new changes, so give it a read please. Regarding the remaining bugs, better workarounds now exist so check them out
Warning : Dirty flash is not recommended, some testers faced issues. do it under your own risk, and avoid reporting issues if you dirty flashed please!
V4.0 Release Notes :-
Hey everyone, we meet again. This release again focuses on stability and misc improvements, has some additional features such as secure folder
but the main focus was fixing our existing bugs. Based on ~3 weeks worth of testing, there are great improvements to almost every part of the ROM
The F.A.Q as always has been updated to reflect new changes, so give it a read please. Regarding the remaining bugs, better workarounds now exist so check them out
While i wanted to release this on my schedule (20 of each month) i had to delay it due to health issues with my father. so thanks for understanding and I'm happy to say that he is on his way to recovery, it was scary times for sure. but taught us a lot.
chatter aside, i hope you enjoy the ROM, and let me know how it goes, Development on V5 starts early next month, and this time hopefully I'm focusing on More features possibly a OneUI 2.5 port if it came in time. will see how it goes
V3.0 Release Notes :-
Hi once again, Hope you enjoy this release. while its a smaller update compared to V2. this focuses more on stability and fixing some annoying issues from V2.
OneUI 2.1 Gives us great fixes regarding memory leaks and performance degradation. and I've improved and re-did all the fixes I've developed for this port to be much simpler and easier to update in the future. instead of relying purely on Hacks.
There are still some bugs that i am starting to feel like we will never fix, but then again this is only the 3rd release. so we will see
how it goes in the future.
The F.A.Q as always has been updated with new notes and workarounds.
With that said, Enjoy the release. hope you like it. and as always, if you appreciate what i do, leave a thanks, constructive feedback and consider a donation
V2.0 Release Notes :-
Hello again, Ive taken my time With this release and spent significantly more time trying to improve the experience as much as possible.
There are still some bugs remaining, the biggest being the overnight crash (which thankfully we have a workaround for those who face it often)
Besides that i belive most of the remaining issues are either minor or can be lived with for now.
This release focuses on stability first, the previous base was a hacked up version of FEB and MAR with quite basic fixes. everything has been redone and hopefully for the better
Thanks you for your great reports that helped improve this ROM alot. and thanks to the testers who spent hours testing and evaluating this ROM. Please be sure to read the F.A.Q and notes to avoid issues
P.S : This version has very experimental Note 7 FE support. Let me know if it works or not, if it does, Iris probably wont work.
Initial Release Notes :-
After a battle that took months on end, im able to deliver you this project in a state were i can deem it as "Daily Driver", This was no easy task, Android Q has changed alot
And a skin such as oneui 2.0 was never intended to run on this device, But here we are. another middle finger to planned obsolescence.
Aside from project Treble, this officially is My first major project on this platform. and i hope you like it.
As the nature of "Initial releases" tend to be, expect Bugs, i wrote down the ones i can see and that are actual issues that can affect people. so make sure to read them.
And The F.A.Q and Notes page is more important than this entire post. it details stuff that you might need to do in order to avoid issues and not to look stupid reporting issues that otherwise wont happen.
Finally, This rom is only possible due to a TON of contributions from my friends @corsicanu , without him you probably wouldn't have seen this ROM.
I have also included the majority of improvements , Aroma and edits from his Amazing "HadesRom" Series which im sure you guys are familiar with already.
A Lot of great people helped me make this project, especially testers who has been digging through this ROM for over a month. make sure to check them out in the credits section.
Alright enough chit-chat. Enjoy the ROM. and do let me know in the thread how it is going on your end.
Before you post : READ everything, And especially the install steps and F.A.Q, the rom has been tested thoroughly for a long time, so if you have an critical issue like not booting or something major, you missed the instructions, posts that are irrelevant to this project will be ignored(Constructive criticism is welcomed). If you do face a new bug however, dont just say "hey bug here fix nao" provide more information, and a LOGCAT, bug reports without logcats will most likely be ignored.
Android 10.0
N960FXXS9FVE1 May 2022 release
Heavily debloated/deknoxed
Zipaligned and tuned
Optimized for battery and performance
Full Samsung OneUI 2.5 Experience
Magisk Supported
RMM PrePatched
F2FS for userdata and cache
CronosKernel v6.5
Selinux Enforcing
Safetynet bypassed out of the box
And all the goodies Android Q / Oneui 2.5 Brings
Full support for the Entire Exynos8890 family of devices
Contains all features from S9 minus hardware specific ones (Iris/faceunlock etc)
All the main features are present (Wifi,Bluetooth, gps, camera etc)
Floyd Port Features :-
Samsung S9 DolbyAtmos
optimised for S7/S7E/N7/N7FE with their own separate configurations
Many prop and feature tweaks and exclusive apps
DE-Knoxed and disabled Additional samsung root prevention and security spams
Full OMC/OXM setup with ~85 countries supported
MultiWallpaper support
Selectable SmartManager (Intl / CN)
@corsicanu Patched GoodLock manager
Debloated via Aroma (Email, Calculator, Video, Music, Voice Recorder, etc)
Custom boot animations (Samsung Wh/Bl , Floyd, Hades)
Storage Booster / Native APP2SD
Custom Fonts/Emojis included (And 1120 Font mods/Google fonts/iOS Emoji etc)
Patched for Single/Dual SIM + SDCard
Patched Dual Messenger for All user apps
Selectable Edge Panels and edgelighting+
SamsungDaily (BixbyHome) , Bixby Voice and Bixby Vision
Recovery toggle (Long Press restart)
Samsung Max and other Misc WiFi features
Native AppLock
Wifi S-Secure
Native Screen Video recorder
Native Call recorder
Custom CSC features (status bar network speed, Call screening, LTE Only etc)
SecureFolder + Knox WorkProfile
Google LiveCaptions
Selinux Enforcing
Native SafetyNet bypass
Selectable Note 10/Note 9 Ringtone/Notification sound
Selectable support for rounded UI elements
Selectable ADAway
Selectable Android 10 NavigationBar/Gestures
Selectable DualSpeaker
And the list keeps going!
CronosKernel V7.0 :-
All of the custom kernel features can be controlled using HKTweaks by @corsicanu
Full Android Q Support
Compiled with GCC 4.9 toolchain
Optimized for battery and performance
Tons of under the hood improvements
Upstreamed to 3.18.140
F2FS Support
R29P0 GPU Backport from Exynos7870 Q source
Improved sched tick rate
GPU Overclocking / Voltage & Thermal control
CPU Voltage Control And underclocking
Devfreq Voltage control
Compiler optimizations
Many wakelocks blocked by default
BoefflaWakelock Blocker
WireGuard Support
MoroSound control
Magisk Support
Aggressive samsung wakelocks block toggles
Battery charger controls
FadeLED Support
DT2W / S2W / S2S Supported
UKSM Module included
Tuned SWAP rate
Dynamic Fsync Driver
PowerSuspend Driver
PWM Flicker Free Mod by @Wootever
Greatly improved scheduler and governor
And many others that can be found on github
Support for NFC and Smart Cases on Q
Improved S9 interactive Governor
Disabled GPU boosting little cores
Disable DVFS fully
Re-Tune samsung input booster
Improved Magisk Hide
Improved DVFS behaviour
Reduced power consumption during video playback
ZRAM with LZ4 Compression enabled by default
GPU overclock upto 806mhz
Massive patches and backports for Android Q
CIFS Support
Switchable SeLinux
And much more
ensure you have up-to-date TWRP (MoroTwrp Recommended or My TWRP).
ensure you are running recent oreo bootloader and modem!
Download and copy the ROM to your device
Wipe everything (SYSTEM,DATA,CACHE,DALVIK and if possible internal storage)
Flash the ROM.ZIP (Select only what you will use in bloat otherwise it will fail due to system size)
flash any available hotfixes/patches (Found in the same download section)
Setup your rom and READ the F.A.Q for more information.
After a full successful boot. you can flash Magisk if you need ROOT
Follow the git repo to stay uptodate on bugs : Github
Imgur Album with Screenshots : IMGR | 2.5 Screenshots : IMGR
IF you helped in this rom and i forgot you, Send a PM or contact on Telegram
@corsicanu For a ton of support with this Project and a ton of HadesROM Features / Aroma (xoxo)
@kill-switch For Support and assistance with this ROM
@Khaled shabbar for 3rd party volume fix
@cvolton For fixing Device MAC Issues and 4K/60 FPS camera mod, and other contributions
@Ivan_Meler For help with fdsan
@morogoku & @pascua28 for help with kernels
@RickyBush_ For IOS Emoji
Thanks to the Testing Team for helping me greatly :-
@kill-switch @Morogoku @ModX81 @Khaled shabbar @Random-Tester @dave457 @Cvolton @Logan @Shariq3422 @MkUltraBlack
@RedLikeSnow @SnowFuhrer @nalasTS @Oto_16
@Sparta19666 @mathy007 @CANCAN_BBN @Kakashi82 @unibombz @Arcsin2
Downloads. Changelogs , F.A.Qs below
Contributors
ananjaser1211, corsicanu, kill-switch
Source Code: https://github.com/ananjaser1211/Cronos_8890/
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: Latest Bootloader/Modem and TWRP 3.3+
Based On: Android 10 - Oneui 2.5
Version Information
Status: Stable
Current Stable Version: V7.0
Created 2020-04-20
Last Updated 2022-07-01

Downloads and changelogs
NewsChannel : Telegram
Support Chat : Telegram
--------------------------------------------------------------
FloydQ V7.0 [LATEST]
AFH : Download
MEGA : Download
GoogleDrive : Download
HOTFIX : Download
Release Post : XDA
P.S : if you had issues downloading from Drive, sign in and save the file to your drive. the file name will show up as Copy of Floyd*
Size : 2.53GB
MD5 : 7d34c47272c5f241f281a60dd5a215dc
SHA1 : f6736340d23e7534bb82f49eb835de1690628276
* Make sure to verify the file hash you downloaded to avoid issues such as not being able to boot / zip corrupt
Windows : VerifyHash Thanks @dave457
Android : HashChecker
FloydQ 6.0
AFH : Download
MEGA : Download
GoogleDrive : DEAD
Release Post : XDA
P.S : if you had issues downloading from Drive, sign in and save the file to your drive. the file name will show up as Copy of Floyd*
Size : 2.52GB
MD5 : 10393efe56528b7a2ce658e562ccc324
SHA1 : b1564b5ae62dc4eb0cdcfc5e06616b4a3608192b
* Make sure to verify the file hash you downloaded to avoid issues such as not being able to boot / zip corrupt
Windows : VerifyHash Thanks @dave457
Android : HashChecker
FloydQ V5.0
AFH : Download
MEGA : Download
GoogleDrive : Download
Patch 1 : XDA
Patch 2: Github
Patch 3 : XDA
Release Post : XDA
P.S : if you had issues downloading from Drive, sign in and save the file to your drive. the file name will show up as Copy of Floyd*
Size : 2.72GB
MD5 : c647582f51fbb2f2b7e491789109e7fc
SHA1 : 1a49997f7dac6007a8c67bdbdac169c93515e3cc
* Make sure to verify the file hash you downloaded to avoid issues such as not being able to boot / zip corrupt
Windows : VerifyHash Thanks @dave457
Android : HashChecker
FloydQ V4.0
AFH : Download
MEGA : Download
GoogleDrive : Download
Release Post : XDA
P.S : if you had issues downloading from Drive, sign in and save the file to your drive. the file name will show up as Copy of Floyd*
Size : 2.66GB
MD5 : dba0e2feb8148b99b74063a8806453d9
SHA1 : 184ca149e321e322c2b79212571c9747ec8b8040
* Make sure to verify the file hash you downloaded to avoid issues such as not being able to boot / zip corrupt
Windows : VerifyHash Thanks @dave457
Android : HashChecker
FloydQ V3.0
AFH : Download
MEGA : Download
GoogleDrive : Download
Release Post : XDA
P.S : if you had issues downloading from Drive, sign in and save the file to your drive. the file name will show up as Copy of Floyd*
Size : 2.61GB
MD5 : 494d6d720a265cc8a1cbd9d7b3eacb61
SHA1 : d1d226b73cfbf55233d6e7162fdcefbd4f946354
* Make sure to verify the file hash you downloaded to avoid issues such as not being able to boot / zip corrupt
Windows : VerifyHash Thanks @dave457
Android : HashChecker
FloydQ V2.0
AFH : Download
MEGA : Download
GoogleDrive : Download
P.S : if you had issues downloading from Drive, sign in and save the file to your drive. the file name will show up as Copy of Floyd*
Size : 2.50GB
MD5 : ca15402f012a154c478b05e965e808d6
SHA1 : 401c880f366848090d72f0ea971de4ec743b0cab
* Make sure to verify the file hash you downloaded to avoid issues such as not being able to boot / zip corrupt
Windows : VerifyHash Thanks @dave457
Android : HashChecker
FloydQ V1.0
AFH : Download
MEGA : Download
GoogleDrive : Download
Updated F.A.Q : XDA
WiFi Improvments : XDA
Sound Improvments : XDA
Kernel Update : XDA
P.S : if you had issues downloading from Drive, sign in and save the file to your drive. the file name will show up as Copy of Floyd*
Size : 2.56GB
MD5 : 8a1da0663f05aed440f48770aa6a742e
SHA1 : 81621da90a7192292ce9f216c34e4d3d21998d4a
Floyd 7.0 - 01.07.2022
- Fully rebuilt and rebased on N960FXXS9FVE1 May 2022 Patch
- Cumulative fixes and changes since April 2021
- Merged samsung security patches since v6
- Re-worked Audio / AudioFX System to mitigate issues
- Boost overall Audio/Bass And match it more with Pie
- Various misc fixes in the base forked from Note 8 Q project
- Performance improvment due to base changes
- Support Selinux Enforcing
- Update ALL the apps/featuers in bloat to latest Q release
Aroma
- MemorySaver/Storage booster included by default
- Update iOS Emojis to 14.6
- Include latest chinese smart manager with added features
- Add Manage App Data feature (enable/disable network per app)
- Updated Goodlock mod to 20220413
- Update AdAway to v5.12.1
- Fix BixbyRoutines FC when enabling brightness control
- Add latest SamsungDaily
- Remove Force RCS as it needs carrier and reciver support
- Remove VancedManager due it being Discontinued
- Add calculator directly in the rom
- Updated OMC packages to latest FUK1 package
- Remove S9+ Infinity Wallpaper package due to samsung stopping updates
- Add Toggle for SELinux Enforcing (Check F.A.Q for more details)
Fixes
- Fix issues with power/thermal HAL that caused lag and performance degredation
- Improve Auto brightness tables
- Fix IRIS sensor on Note 7 and make it work in secure folder and other places
- Fix note 7 lag on lock screen
- Disable Note 7 torch intensity slider to avoid FCs and workaorund it
- Fix Selfie capture with HeartRate sensor
- Support more NFC card types (Mifare plus Thanks @Pavlon333)
- Cleanup some of the broken constant logging services
- Disable High Brightness Warning
- Improve and update basic safetynet hiding without magisk
- Update Safetynet Fix to bypass recent GMS restrictions (Thanks @@AndrzejDwo and @Ivan_Meler)
- Enable back Audio encoding in Slowmotion videos
- Remove problematic RAM configs
- add 2x zoom button in camera
- More improvments to RAM/ZRAM
- Fix wakeup freezes
- Fix Alarm issues
- More test fixes for Audio muting issue
- Improve Audio Quality / bass a bit
- Set Actual device name instead of note 9 by default
- Remove old deperecated props
- Various other misc changes in the ROM/Base
- Workaround initial FDSAN Error that causes issues
- Prevent Notes APP from updating on N7FE (to fix pen issue)</*)
CronosKernel
- CronosKernel V7.0
- Re-enable wakeups by eventpoll
- Revert problematic I2C stall fixes
- Revert CPUFreq relation back to stock
- Enable back HMP Boosting on GPU to avoid wakeup issues
- Restore default DVFS CPU Behaviour
- Add custom tune build flag
- Optimze the kernel for performance instead of size
- Revert power-queue changes
- Revert GPU MIF clock back to stock
- Revert CPU Boost freq back to stock
- Merge updates for I2C From Exynos7870
- Restore N7FE Camera/Iris code
- Misc sound-core driver changes from Exynos7870
- Enable CIFS Driver
- Disable Forced Permissive
- Enable back Audit logging
- Increase default audio in moro_sound
- Set Torch brightness to max on Note7 due to lack of slider
- fix pm_qos kernel panic in camera driver
Floyd 6.0 - 01.04.2021
Updated and rebased to N960FXXS8FUC4 March Security Patch
Includes all the software fixes and updates from Previous Versions
Includes all split patches released earlier
Added more experimental fixes for Charging and AudioMuting issues
Re-did prop mods and removed useless ones
Major improvements in stability and performance due to base and kernel changes
Updated Honeyboard (Thanks @Khaled shabbar)
Aroma
Updated emoji packs (iOS 14.2 , AOSP Q , OneUI 2.5)
Remove some bloat that can be downloaded (Email and Voice recorder)
Re-Arrange features / bloat lists
Switch audio sound mod to Note9/Note10 instead of S9/S10
rewrote some entries to make it easier to understand
Switch to new Aroma theme and icons
Remove LiveCC from bloat menu as it causes issues when removed
Remove YUVA packages as they are useless bloat
Wipe script will no longer clear hidden internal storage files or keyboard/camera data
Updated Goodlock mod to latest version
Updated Vanced Manager to latest version
Added S10 Webview APKs
Remove Note FE iris option until it is resolved (if ever)
Remove QuickShare support as its buggy
Add CHC, KTC, LUC, SKC , COO And ARO CSC packs
Remove SamsungDaily as it is repalced by Samsung Free
Fixes
Introduce new Camera stability fixes
Improve on FDSAN camera patch to reduce unstable hacks
Fixed EIS Stablization that supports FHD_60, QHD and lower
Reduce frequency of Audio Muting (Read F.A.Q for more)
Improve sound cancelation in calls to avoid echo in certain scenarios
Fixed USSD shortcuts
Fixed Emoji black boxes issues
Re-tune Audio bass and gain configs
Increased volume for 3rd party app calls
Fix issues with AudioFX and lifevibes cancelation
Fix an issue that caused wifi to stop working (murata/semco)
Fix an issue that caused some bank apps / google pay to fail
Fixed Volume changing in 3rd party call apps like whatsapp , facebook (big Thanks @Khaled shabbar)
Fixed and greatly reduced Audio muting bug (Thanks @pascua28)
Fixed SmartStay
Added Outdoor mode toggle in settings
Removed some leftover files to save 100MB in system
CronosKernel
CronosKernel V6.5
Disable excess debugging from touch and display
Enable power efficient work-queue
Add fixes for battery reporting
Adjust Interactive Governor to be more efficient in scaling
Add/adjust cache tunable for Interactive gov
Add ROW I/O Scheduler
Allow GPU overclocking upto 806
Adjust GPU utilization tables and Freqs to be more sustainable
Reduce MIF max clock in GPU
Reduce CPU Boost freq to 2.1ghz
Custom Tune inputbooster for better power/performance balance
Reduce little cores boost freq
Enable LZ4 Compression
Update ZSWAP and fix issues with it
Disable VNSWAP/ZSWAP and use ZRAM with LZ4 Compression
Overall noticeable performance improvement in UI, and better performance in-game
RAM is much more stable and will keep more apps stored for longer
Battery mismatch should reduce overtime with the new fixes
Update Ramdisk binary
Fix WiFi dev shutdown (wifi not turning on after sleep)
Fix WiFi causing excessive drain overnight
Add full PS4 Controller support via USB or Bluetooth
Reduce gpu latency/loadavg
reduce expensive selinux calls
Various changes to I2C by pascua28 to handle Audio muting
Floyd 5.0 - 11.12.2020
Base
Updated and Rebased to N960FXXU6FTK1 November Security Patch
Rebase includes Note9 FW + OneUI 2.5 Apps/Features
Includes all the software fixes and updates from Previous Versions
Includes all split patches released earlier
Kept S9+ Dolby System to avoid audio issues
Removed unsupported features/APKs such as SecureWiFi, MyGalaxy
Added experimental fixes for Charging and AudioMuting issues
Forced S9+ Model name to retain safetyNet passing without magisk
Overall Major improvements in stability and performance
Disable ADB Debugging by default for extra protection
Aroma
Fix ARStickers Installation
Fix 1120 Fonts Mod Installation
Fix Echo in DualSpeaker mode
Update all Bloat , GoodLock, VancedManager to latest versions
Removed all GoodLock apps and replaced them with New patched GL Manager
Removed useless WiFi Security from bloat
Update S-PEN Apps/Frameworks for Note devices
Add S9+ Infinity wallpapers as an option
Slight updates to General ODM Pacakge
Fix an install issue that would leave some on splash screen
Update Ringtones with 2.5 media and N9 Sounds
Add a fix for QS Toggles reseting with extra QS enabled
Replaced KTC OMC with unbranded KOO OMC for korean users
Various other misc changes
Add option to force RCS capability Thanks @Camille31400
Added SamsungNotes v4.1 for Note7 devices to fix FCs
Fixes
Add Proper WiFi loader service to fix issues with some chips
Fix WiFi instability, disconnections and no connection after doze
Improve Audio Fixes and noise cancelation profiles
Enable 5G HotSpot on all countries
Supress CIDManager (SimCard Changed) Reboot request fully
Fix Optimizing loop on Note devices
Include new camera patch to fix both random crash and green video issues
Patch Libc to fix FORTIFY: FATAL errors caused by double mutex locks
Fix Microphone issues when recording / calls
Fix S-PEN AirCommand on Note devices
Fix Knox WorkProfile (for MDM Apps / Island etc)
Fix issues with DolbyAtoms in games (And add Dolby Gaming profile
Improve 3rdparty volume control Fix to be more stable
More Fixes for Charging / overnight crash issues
Other various misc changes/fixes from my N8 Q Project
Fix an issue that Prevented setting custom IP/DNS etc for wifi
Show VoLTE indicator in statusbar for all VoLTE supported countries
Kernel
CronosKernel V6.0
Updated OSRC to N935KKKU4CTH1
Remove WiFi wakelock mods that caused issues
Hide isolatedProcess Service to let more apps pass safetyNet
Restore stock inputBooster setting
Restore Argos Network booster
Revert Mods in Mobicore driver that casued issues
Changes to DVFS min/max to improve power consumption
Reduce DVFS Boost Frequency
Remove and reduce binder tracing/logging
Limit CPU Idle during Video playback
caching improvment in binder
Other misc changes for fs, spinlock
Floyd 4.0 - 08.30.2020
Updated and Rebased to G965FXXSBETH1 August Security Patch
Includes all the software fixes and updates from Previous Versions
Re-did OMC and switched to proper OXM package
Integrated only XID/KTC/ZTO/FMC along side the stock OXM list
Fix PREV OMC and use it by default
Remove broken OMC apk that caused V3 issues when setting features
Disable FactoryReset pop-ups for some when changing CSCs / SIMs
Update GoodLock suite to latest + include corsicanu's updated manager
Replace outdated YoutubeVanced with latest VancedManager (Refer to F.A.Q)
Fixed SecureStorage With a specialized HACK for outdated Keystore
Fixed WorkProfile / Custom OS detection (Apps that need it should work now)
Fixed a bug that caused McRegistry/Keystore to spam all the time
Fully Killed Vaultkeeper Which caused sleep and performance issues
Ramdisk Fix-up and cleanup
Added some patches for offline charging and mismatch issues (experimental)
Updated Audio Cancelation configs to help with echo (NXP Profile)
Fix Bixby settings FC
Add Rounded UI support in aroma
Removed some left over bloat and HALs
Fix cameraserver nullptr crash when running/switching the camera
Fix App lag when attaching (And it tries to grab the camera) in Telegram, Whatsapp etc
Fix Camera FDSan crash (no camera till you reboot) thanks @Ivan_Meler
Google Live Captions support (Thanks @AlexisXDA)
Add Support for N930X (Note 7 Bomb Edition)
Add Note 7 TypeC USB HAL to avoid connectivity/Charging issues
Add Note 7 S-PEN Framework and APKs (Still no AirCommand)
Fix Note 7 SmartView issues
Remove bugged RandomMac
Improve WiFi Stability on some murata/semco chips
Move AR Stickers to Bloat (Saves ~80MB)
Add back Extra QS toggles option in Aroma
CronosKernel V5.5
Note 7 (Bomb Edition) Support with MM Bootloader
Remove More excessive logging and disable SOFT_LOCK_UP
Reduced WiFi Wakelocks by default
Removed Knox NCM Driver (Bloat)
Disable security/audit at the kernel level
Switch to WestWood TCP by default
Disable GPU HMP Boosting as its wasteful
Overall improved UI Performance / Doze
Floyd 3.0 - 07.20.2020
Updated and Rebased to G965FXXUAETG3 July Patch with OneUI 2.1 Base
Includes all the software fixes and updates from OneUI 2.1
Improved and simplified Most fixes to cause less issues
Full Keylight support
Integrated all previous mods, Fixes And Aroma features
Added MemorySaver Yuva Feature
Re-did Audio one more time with new configs
Fixed Notification LED hiccups
Fix BeautyMode Color, Jawline, Eyes adjustment
Remove unsupported camera effects to save space
Remove SNAPHAL which we dont support to save space
Add S20 HoneyBoard
Improve WiFi Stability by Fixing Bluetooth Firmware issues
Include unreleased V2.1 Changes and fixes
Enable AR Emojis (Not Create my emoji)
Make knox apps installed by default for Move2SD support (and make it more clear in aroma)
Remove "Extra CSC Toggles" which resets the order of toggles every boot
Disable Encryption to prevent broken data when switching to some kernels
Fixed inability to change photo resolution in camera
Updated ODM Package and re-merged all previous countries
Use Stock RAM Configs to help with background apps
Fixed an issue setting default OMC
Added FloydV1 OMC Behaviour. which might mitigate CidManager issue for some
Fixed CallDetails / Blocking Issues
CronosKernel V5.0
Switched compiler back to GCC 4.9 (Instead of Linaro)
Revert to Oreo battery driver to reduce battery issues
Add battery swelling/health Data from stock
Disable STORE_MODE due to creating issues with charging rate
Fix Note 7 FE 70% Charge capacity
Disable broken touch gestures on Note 7 FE
Backport Latest ION driver from Exynos7870
Backport Latest Binder Driver from Exynos7870
Enabled updated Watchdog and DEBUG_INIT_EXIT_PANIC
Enabled misc Android Q configs
Reverted WiFi argos changes that caused instability and reduced download speeds on big files
Floyd v2.0 - 06.20.2020
Base Changes
- Updated and Rebased to G965FXXS9DTD7 May Patch
- Updated 8890 Blobs to N935FXXS7CTE1
- Very Experimental Note 7 FE Support
- Re-did the entire Rom from scratch with revised fixes
- Slightly debloated the base
- Fixed Base issues such as infinity wallpapers
- Added new OMC package with upto ~170 Countries (including US/CA/KOR/ZTO,XID,ARO and much more)
- Re-did and updated the vendor overlay
- Updated and removed some of the bloatware in Aroma
- Disable formatting cache to EXT4 on setup (and wipe it instead)
- Disable unsupported Dual LTE
- Add Hack to enable touchKey vibration
- Clean-up unused S9 HALs and libs
- Add a more stable Camera service
- Fix magisk on Full permissive Kernels
- Add Dolby on speaker
- Remove LiveFocus fully
- Fix AREmojis
- Add LongPress Reboot to Recovery (Thanks @corsicanu)
- update F2FS Mount flags (Thanks @diepquynh)
- Improved WiFi Stability (Thanks @Ivan_Meler
- Fixes for Tethering
- Disable Broken FP Gestures from affecting system
- Set both cameras to use 9:16 aspect ratio by default
- Add GearVR Services (Thanks @zaper4life)
- Remove unsupported MyEmoji maker (Due to size constraints)
- Added front camera flash
- Added camera burst shot
- Add Oneui 2.1 keyboard (HoneyBoard thanks @Random-Tester)
- Add prop improvements(Thanks @Random-Tester)
- Camera shutter with heartrate sensor (Works 50% of the time)
- Improvments and fixes to OMX and video playback/recording
Fixes
- Fixed Power profiles to reduce Heat and power draw
- Fix CPU Frequency scaling getting stuck
- updated and fixed issues with memtrack and Power HALs
- Added Vulkan Support
- Fixed a bug that caused charging to stall in some scenarios
- Fixed issues that broke FastCharging
- Fixed a bug that prevented apps from being moved to SDCard
- Update more HALs to Q blobs
- Remove broken samsung camera watermark
- Fix Flashlight intensity sliders
- Fix BeautyMode FC
- Add samsung Camera quick lunch (Double press Power button)
- Fix a buffer crash when using Camera to reduce its Lag
- Make camera more stable when using 3rd party apps
- Fix Seperate Sounds feature
- Fix Bixby Vision
- Update and fix BixbyVoice (Read F.A.Q for setup)
- Fix a BUG that caused flashlight to remain on in some scenarios
- Re-Worked Audio from scratch and Fixed various issues with Gain and Bass
- Fixed an Audio bug that caused the phone to get muted randomly
- Fixed Loud charging notification noise
- Fixed NFC
- Fixed Smart Cases being inverted
- Fixed Broken touch with S-View case
- Fixed Various issues with installation
- Fix S-Protect FC
- Fix Edge quicktools height issues
- Various other fixes and improvments
- Fix SlowMotion
- Fix Lag/delay when opening security/biometrics
- Fixed camera aspect ratio changing
Aroma
- Updated Wipe and mount scripts to work on Any TWRP
- Add new Floyd Boot Animations
- Add new CSC options
- Add S10 Sounds
- Update AdAway
- Update Fonts and emojis
- Add an option to remove all KNOX Apps
- Add an option to install custom emojis system-wide (For notifs etc)
- Update GoodLock Apps and add HomeUP
- Updated CSC installation script to avoid issues were it gets stuck
- Update most of the ROM scripts to make the installation faster
- Add back BixbyVision in bloat
- Various other minor changes
CronosKernel
- Update to CronosKernel V4.0
- Removed LZ4 Broken support (Revert to stock lzo)
- Remove certain battery wakelock control
- Updated NFC driver for V2.0 (for future fixes)
- Revert custom MM values back to stock
- Disabled problematic Armv8.1 features
- Enabled XT_TARGET_CT (Tethering fixes)
- Removed NFC Wakelock control
- More reverts to custom RAM/LZ4
- Fixed smart covers on Q ROMs
- Fixed NFC on Q ROMs
- Disable a ton of wasteful debugging
- Update interactive governor with S9 fixes / improvements (Thanks @nalasTS)
- Let the CPU prefer to use lower Frequencies when high ones are not needed
- Re-Tune Samsung input booster to be less aggressive
- Disable hmp_boost from Argos / interactive Driver
- Slightly improve touch response
- Disable GPU little cores forced boosting (Reduce heat)
- Fully disable GPU DVFS From the kernel level
- Added HeliosScripts from pie
- Added system & vendor etc/init.d support
Floyd v1.0 - 04.20.2020
- Initial Release[/HIDE]

Read this F.A.Q While the rom is Downloading.
NOTES :
- After installation, leave your phone to build and optimize caches. which can take upto 15 minutes on clean flash. your phone will be HOT at this stage. If DirtyFlashing, it can take upto 30mins
- Clean flash is always recommended to avoid issues especially with this release! if you faced weird issues/blackscreens/freezes a clean flash is recommended without smartswitch / samsungcloud restore
- When upgrading from V6 to V7 some users faced FCs, and issues using internal data / taking screenshots and instability / freeze mainly while using enforcing option, for those users, you must format data in TWRP (Wipe > format data > YES) this will clear all of internal data which contains incompatible data from V6.
i would again advise for a full clean flash when upgrading to V7
OneUI 2.5 Related Notes
- These are issues that are caused by OneUI 2.5 , that i have no power over to fix.
1) Google Chrome sutter/freeze : github
2) AllowedDevices list in hotspot : Github
3) goodlock SountAssistant might limit audio : Github
F.A.Q :
V7.0 Related F.A.Q :
Q : Should i use Enforcing ? What is it ? How to enable it
A :
- Selinux Enforcing can be enable by ticking ENFORCING option in AROMA installer
- Enforcing adds restrictions and does not just allow anything to access anything
- Enforcing will allow you to bypass MOST root detection and will allow many Banking apps to work again
- If you want to use ROOT + Enforcing you are likely to need Magisk Hide (magisk v23) / Denylist (V24+) to retain banking apps etc
- Selinux Enforcing is still "Testing" phase, but it should be stable for now
- Settings does not show Selinux status, to know status you can type "getenforce" in terminal emulator
- Enforcing ONLY works in the included Cronos V7.0 Kernel, and will be disabled if you change kernels
Q : Note 7 Iris ?
A :
- Iris can be registered and enabled on Note 7 However it is still experimental, and is prone to causing a random reboot every few days
- A test workaround is disabling "Screen on Iris Recognition"
- In order to have IRIS Flash light torch intensity has been disabled, instead the torch will run at max brightness always
Q : Infinity wallpapers ?
A : Infinity wallpapers were removed due to out of date S9+ Builds, as samsung no longer ships updates for it
Q : Games are Laggy/Pix-elated/Stutter/sucks/crashes
A : Open GameLauncher > Top Left menu > Game Performance > Set Game performance to "Focus on PowerSaving" : Video
Q : Phone is not charging / Discharging while charging
A : Check your battery temperature, OneUI 2 wont charge when your battery is above 42C. there is no bypass to this
Q : How to get Root ?
A : Download Magisk and follow instructions (V23.0 Is recommended if you root + easy magisk hide. rename .apk to .zip and flash via twrp if your version is old)
Q : SafetyNet ?
A : The ROM Already contains bypasses and fixes for Safetynet without the need of magisk, however if you root, you must enable HIDE to restore Hiding for many apps
V6.0 F.A.Q :
Q : Random Audio Muting new workaround
A : Incase you are still unlucky and get muting, in dialer type *#0*# and press speaker. this will restore your audio without rebooting
Q : Heavy battery usage / Drain
A : A recommendation i mentioned in my group (aside from boring calibration) is to charge your phone while its powered off multiple times.
I.e whenever possible, charge your phone to 100 when its turned off.
on oneui 2+ for some reason the battery charges from ~90 to 95% only, like there is a gap, which sometimes go as far as to 85% (system says 100% but if you charge offline it will be less than 100%)
i started doing that recently and SOT on my S7 went from barley hitting 3 to hitting over 4 hours sometimes (with light usage tho)
more info on the bug here https://github.com/ananjaser1211/FloydQ_Reports/issues/196 , i have not found a way to fix it yet
Q : phone crashes overnight (Green LED only)
A : There is no 100% method that works out of the box for "Everyone" However using the device for a day or two usually eliminates the issue fully. other workarounds include limiting charging capacity to 99% as shown below
- To recover from this crash, long press volume down and power for 10 seconds until the phone reboots
- This issue mostly happens on fresh clean installs, and goes away after few days of usage
- Having AOD or ScreenSaver might reduce the issue (in my case it did)
- Best suggestion is to either Not charge overnight for the first few days of the installation, or charge the phone while its powered off
- limiting charging capacity to 99% seems to be the best option if you want a fix right away, you can do that by using MagiskModule ACC (adaptive charging controller) module + Its config app
Q : GCAM Support?
A : You have to use Android Q compatible GCAM Otherwise it will be stuck at processing, This version of UnixCamera by @mark199850 is supported. install it then go into camera settings and restart the gcam app
Q : How to Adjust/Disable level of touch key vibration ?
A : Go to settings > Sound and vibration > Vibration Intensity > Increase or decrease Touch Interaction (lowest will disable vibration)
Q : How to Disable keylight without enabling PowerSaving ?
A : Use this app to configure key light time out settings GalaxyButtons
Q : Does this support X?
A : This ROM supports All Exynos8890 devices (S7/S7E Note7 and Note7FE) and does not support Snapdragon models
Q : I have Symlinks error / Rom wont go past splash
A : As the AROMA Told you, don't pick all the bloat. and use default settings if you don't know otherwise
A : If you previously installed Treble, and did not flash revert, Now is a good time. Your system might be too small
Q : Device is running too hot
A : If it was just set-up, Give it time and make sure everything is up-to-date.
Q : What to do after the rom is setup ?
A : Go to samsung apps, let the phone update everything except game booster
Q : My phone does NOT boot help pls
A : Ensure you have LATEST bootloader and modem installed, did all the wipes, and did your house chores.

Addons, Fixes and other msic stuff will be posted here when needed
V7.0 Patches / Hotfixes
1) [Critical] HOTFIX : Download
2) Floyd V7.0 WorkProfile/Knox WorkProfile Fix
Optional, flash if you need WorkProfile or to use island app
Download : Github
3) Floyd V7.0 Aug 2022 Samsung GPS Critical update
This is an update that rolled out for multiple samsung devices to fix 10-BIT Rollover GPS issues, for more information read here
TLDR; This improves GPS accuracy and speed
Download : Github
V5.0 Patches (Do not use on V6.0)
1) USSD Codes support (#0#) and QHD 60FPS Video recording + Removed 5 Minute recording limit in Samsung Camera
For S7/S7E/N7/N7FE
Download : Github
Thanks @Cvolton for the Camera MODs
2) Emoji Packs
These are updated Emoji packages suitable for OneUI 2.5 . this will resolve the black boxes error seen in the keyboard when picking an emoji pack in aroma. Thanks to @FiestaLake for updating the emoji files and packing them up. download and flash the zip of the emoji pack you want
Thanks @FiestaLake
Download : Github
3) 3rd Party call volume
This patch is similar to the one from V4 minus some stuff, i am not sure why it is still required as 3rd party volume was resolved. but some people still face volume changing issues.
This will fix the volume slider in whatsapp and so on. simply flash it in twrp
Download : Github
Avoid This patch, it is causing other audio issues, to resolve 3rd party call volume change, follow this workaround : Github
Quick Guides and Notes
These are the Notes in our Telegram Group, i will update it them when required
How to DirtyFlash properly / Update from a version to another
Note : Do this ONLY if i did not mention to CLEAN FLASH
1) Take a TWRP backup for all your partitions (just to be safe)
2) Wipe SYSTEM , Cache and Dalvik-cache
3) Flash the ROM.zip
4) In Aroma, select "No Wipe"
5) Select your features
Once the ROM finishes flashing, let it boot and leave the phone for ~30Mins to boot up and rebuild caches and "Upgrade"
You will notice that it will say Updating after it boots if you came from V2>V3 or V3>V4 And so on, Just leave it optimize
Warning : Your phone WILL get hot while dirty flashing and doing the Boot / optimization. so leave it rest
How to Restore EFS from a ROM Generated Backup
This only concerns Floyd and BlackDiamond ROM users. As while installing the ROM, it will automatically Create a binary Backup of your EFS Partition
Note : The EFS.img backup gets replaced everytime you flash the ROM, so be sure NOT to flash the ROM when your EFS is broken, as it will delete your old save
EFS backups are located at internal memory / EFSBackup/efs.img
How to Restore EFS Image Backups
Method 1 Using a PC (Recommended)
1) Download loggingKit on your computer
2) Extract it to a folder and press shift + right click mouse button > open powershell window here
3) Connect your phone while its in TWRP
4) in your power shell window type these commands
./adb shell
dd if=/data/media/0/EFSBackup/efs.img of=/dev/block/platform/155a0000.ufs/by-name/EFS
5) Your EFS Should be restored to the state it was in before you flashed the ROM
Method 2 Using TWRP
1) Go to TWRP > Advanced > Terminal
2) Type the following command
dd if=/data/media/0/EFSBackup/efs.img of=/dev/block/platform/155a0000.ufs/by-name/EFS
How to setup F2FS for Userdata
1) Download an F2FS Ready TWRP (MoroTwrp , or My TWRP / Note7 TWRP Here)
2) Flash the TWRP.img or .ZIP within TWRP, if you are flashing moro, just flash it as a normal ZIP, if you are flashing my image, got to flash > press flash IMG > select my recovery.img > select Recovery Partition
3) Reboot back into TWRP after flashing the new TWRP (very important)
4) Wipe > advanced wipe > Data > CHANGE > F2FS (Your entire internal storage will be wiped out! this includes ALL data on the device, take a backup)
5) Reboot and you will have DATA as F2FS
4) Repeat the same step for CACHE
Warning : DO NOT format system to F2FS, as booting from it is not supported
V4.0 Patches (Not needed on V5)
V4.0 Patches (Updated Aug 31 , 2020)
1) Volume changing in 3rd party calls (Such as whatsApp , Imo) When reducing Volume it remains loud. This patch fixes that issue and might help to reduce or eliminate the Audio Muting bug (Still needs long term testing)
For S7/S7E/N7/N7FE
Download : Github
Thanks @brkbsrn and @merdan85 for testing
2) Optimizing Apps screen showing every time you reboot the device on the note7. this fixes that issue, after installing it should no longer show optimizing every boot, if it still does that, wipe dalvik-cache and cache and let it rebuild them one last time. it will stop showing optimizing
For Note7 and Note7FE only, not required on S7/S7E
Download : Github
3) Enable AR Stickers. I made a mistake in the installation script that does not let AR Stickers show up in camera. Flash this patch only if you selected AR stickers
For S7/S7E/N7/N7FE
UPDATE SEPT 1 : ARStickerPack patch has been updated, to include the APKs since some forget to pick it up in aroma.
also might have fixed a logic issue that caused install issues on some twrps
Download : Github
4) 1120 Fonts Pack When installing BOTH google fonts and samsung 1120 font pack, both stop showing up.
this is due to both font packs being based on the same package name
For S7/S7E/N7/N7FE
Download : Github
5) 5G Wireless hotspot
This patch will enable 5G Hotspot again, regardless of what country your CSC is using. Samsung locked this for some reason in the most recent ODM update. i don't know if its a mistake on their part or what. Regardless, the bypass is enough to get it back and running
P.S : This will hide IRIS from the note 7 devices, it does not work anyway so its not a big deal for now.
For S7/S7E/N7/N7FE
Thanks isbon007 for finding the BUG, and testing the fix
Download : Github
V2.0 Patches (Not needed on V3/V4)
1) CronosKernel V4.5 [Critical] : Release Page
V1.0 Patches (Do not Flash on V2.0)
Patch 1 : Wifi Improvements
This fixes issues caused by Bluetooth Low Energy constant scanning that breaks WiFi
For more details and download : Here
Patch 2 : Audio Improvments
This Fixes a ton of issues with Audio, Audio quality, and so on
For more details and download : Here
Patch 3 : Kernel Update
This has important changes in order to test the frequency of overnight charging bug and ram issues
For more details and download : Here

Enjoy this rom everyone, its been long time coming.
Have fun!

Congrats! glad to be part of this!

Congrats anan, splendid work!?

Wow,It's finally out bro,GG

Congrats! and thanks for your hard work

Great work Anan, keep it up!

Bro how can i know if my custom rom is running oreo bootloader and modem??

Thanks !!!!!

I love you!

Congrats and thanks anan

@ananjaser1211
Hi Sir is native callrecording anabled?

Glad to be part of this project! Keep up the good work bro

huismeester said:
@ananjaser1211
Hi Sir is native callrecording anabled?
Click to expand...
Click to collapse
Yes, enable it in aroma
sesshumaruv2 said:
Bro how can i know if my custom rom is running oreo bootloader and modem??
Click to expand...
Click to collapse
Is your phone running other Pie ports without issues ?
if so, You are set
.
Thanks for the kind words everyone

Logan said:
Congrats! glad to be part of this!
Click to expand...
Click to collapse
I hate that pic

excellent work anan congratulations this is not done every day

ananjaser1211 said:
NOTES :
-Updating GameTools/GameOptimizer From galaxy apps will break them.
-On first setup, let the phone update everything before using it
Q : What to do after the rom is setup ?
A : Go to samsung apps, let the phone update everything
Click to expand...
Click to collapse
I'm confused. Should I update the gaming apps or not?

Database Develop

welcome