Database Develop

Infinix hot 2 rooted on marshmallow and xposed installed

thanks to a friend @Frazercrib(who likes to be my lab rat )... The Infinix Hot 2 has been rooted on Marshmallow and Xposed is successfully installed.
Pre-Requisites:
A PC
Infinix Hot 2 on Android 6.0
Recovery Enabler
TWRP
SUPER SU for Marshmallow
Xposed Framework for Marshmallow (Optional)
SP or Infinix Flash Tool
Your Brain
STEPS:
- Place BETA-SU-2.66.zip and xposed-v79-arm-sdk23.zip in your Internal/External SD Card.
- Install MT65xx/VCOM Drivers
- Download and Extract Infinix Flash Tool, TWRP Recovery, Recovery Enabler (place folders in your desired location)
- Open Infinix Flash Tool, click on browse and navigate to folder containing Recovery Enabler, select MT6580_Android_Scatter file and click start.
- Connect your phone to your PC (battery removed)
- Reboot after flashing.
- Do the same process for TWRP Recovery but do not reboot after flashing. Boot straight to Recovery
- Flash SuperSU
- On reboot, TWRP Prompts a message that SuperSU is not installed and asks to install it. Do not accept. Hit the back button and reboot normally.
(OPTIONAL FOR THOSE WHO NEED XPOSED)
- Install Xposed Installer apk and reboot to recovery
- Perform a Nandroid Backup
- Install xposed-v79-arm-sdk23.zip and reboot. (Do not clear anything)
- On reboot, TWRP Prompts a message that SuperSU is not installed and asks to install it. Do not accept. Hit the back button and reboot normally.
DOWNLOAD LINKS:
Infinix Flash Tool: https://mega.nz/#!YUVQESJI!yg0i_YquG7JLx8YTkUr-wkToLOU4Hr50AN931s4tBlY
Recovery Enabler: https://www.androidfilehost.com/?fid=24269982086997892
TWRP Recovery: https://mega.nz/#!lMchVCRR!-a8cQWiYO8k0XqIdr74vlNwAvWBBxz5-VoEPOp8NJSw
Special thanks to @Frazercrib for teaming up with me to get Marshmallow rooted + get xposed working on Marshmallow.
PS: Please see attached file below for SuperSU and Xposed zip, and Xposed Installer apk
SCREENSHOTS:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Here are attached files

Also check this thread to know which modules works on marshmallow to avoid bootloops
forum.xda-developers.com/xposed/unofficial-list-modules-xposed-t3249162

Frazercrib said:
Also check this thread to know which modules works on marshmallow to avoid bootloops
forum.xda-developers.com/xposed/unofficial-list-modules-xposed-t3249162
Click to expand...
Click to collapse
Lol.. Partner in crime!

iAmWiz said:
Lol.. Partner in crime!
Click to expand...
Click to collapse
Bro... How do I remove root on the hot 2 SuperSU was flashed In.?
Sent from my Infinix X510 using Tapatalk

Merlve said:
Bro... How do I remove root on the hot 2 SuperSU was flashed In.?
Sent from my Infinix X510 using Tapatalk
Click to expand...
Click to collapse
According to @Chainfire the root method on 6.0 is systemless and removing root will require flashing your boot.img only. I'm not sure we have that yet on this device

iAmWiz said:
According to @Chainfire the root method on 6.0 is systemless and removing root will require flashing your boot.img only. I'm not sure we have that yet on this device
Click to expand...
Click to collapse
Well, a normal factory reset unroots the hot 2, tested it yday...
Does anyone know why am still getting the 6.0 update of 823mb even wen am already on 6.0??

Merlve said:
Well, a normal factory reset unroots the hot 2, tested it yday...
Does anyone know why am still getting the 6.0 update of 823mb even wen am already on 6.0??
Click to expand...
Click to collapse
Possibly some bug fixes.

iAmWiz said:
Possibly some bug fixes.
Click to expand...
Click to collapse
Then, that's a lot of bugs [emoji6]
Sent from my Infinix X510 using Tapatalk

Merlve said:
Then, that's a lot of bugs [emoji6]
Sent from my Infinix X510 using Tapatalk
Click to expand...
Click to collapse
Uhm here's the difference. The 62x MB update is an incremental update which requires one to be in December build before flashing. The 83xMB update doesn't require. You can make the path to 6.0 regardless of the build you're on.

iAmWiz said:
Uhm here's the difference. The 62x MB update is an incremental update which requires one to be in December build before flashing. The 83xMB update doesn't require. You can make the path to 6.0 regardless of the build you're on.
Click to expand...
Click to collapse
Now I understand... A lot of guys been getting errors tryna flash with stock recovery
Sent from my Infinix X510 using Tapatalk

Merlve said:
Now I understand... A lot of guys been getting errors tryna flash with stock recovery
Sent from my Infinix X510 using Tapatalk
Click to expand...
Click to collapse
That explains it

can this way work on zero3 if i put its recovery

Mido Enab said:
can this way work on zero3 if i put its recovery
Click to expand...
Click to collapse
Yeah, it should.

iAmWiz said:
thanks to a friend @Frazercrib(who likes to be my lab rat )... The Infinix Hot 2 has been rooted on Marshmallow and Xposed is successfully installed.
Pre-Requisites:
A PC
Infinix Hot 2 on Android 6.0
Recovery Enabler
TWRP
SUPER SU for Marshmallow
Xposed Framework for Marshmallow (Optional)
SP or Infinix Flash Tool
Your Brain
STEPS:
- Place BETA-SU-2.66.zip and xposed-v79-arm-sdk23.zip in your Internal/External SD Card.
- Install MT65xx/VCOM Drivers
- Download and Extract Infinix Flash Tool, TWRP Recovery, Recovery Enabler (place folders in your desired location)
- Open Infinix Flash Tool, click on browse and navigate to folder containing Recovery Enabler, select MT6580_Android_Scatter file and click start.
- Connect your phone to your PC (battery removed)
- Reboot after flashing.
- Do the same process for TWRP Recovery but do not reboot after flashing. Boot straight to Recovery
- Flash SuperSU
- On reboot, TWRP Prompts a message that SuperSU is not installed and asks to install it. Do not accept. Hit the back button and reboot normally.
(OPTIONAL FOR THOSE WHO NEED XPOSED)
- Install Xposed Installer apk and reboot to recovery
- Perform a Nandroid Backup
- Install xposed-v79-arm-sdk23.zip and reboot. (Do not clear anything)
- On reboot, TWRP Prompts a message that SuperSU is not installed and asks to install it. Do not accept. Hit the back button and reboot normally.
DOWNLOAD LINKS:
Infinix Flash Tool: https://mega.nz/#!YUVQESJI!yg0i_YquG7JLx8YTkUr-wkToLOU4Hr50AN931s4tBlY
Recovery Enabler: https://www.androidfilehost.com/?fid=24269982086997892
TWRP Recovery: https://mega.nz/#!lMchVCRR!-a8cQWiYO8k0XqIdr74vlNwAvWBBxz5-VoEPOp8NJSw
Special thanks to @Frazercrib for teaming up with me to get Marshmallow rooted + get xposed working on Marshmallow.
PS: Please see attached file below for SuperSU and Xposed zip, and Xposed Installer apk
SCREENSHOTS:
View attachment 3605089
View attachment 3605095
View attachment 3605096
Click to expand...
Click to collapse
The recovery in the mega has been removed help me upload again thanks

Akorstayblessed said:
The recovery in the mega has been removed help me upload again thanks
Click to expand...
Click to collapse
Check here. I don't use the device anymore.

iAmWiz said:
Check here. I don't use the device anymore.
Click to expand...
Click to collapse
that not cool u can help me

Akorstayblessed said:
that not cool u can help me
Click to expand...
Click to collapse
https://twrp.me/devices/infinixhot2.html

iAmWiz said:
thanks to a friend @Frazercrib(who likes to be my lab rat )... The Infinix Hot 2 has been rooted on Marshmallow and Xposed is successfully installed.
Pre-Requisites:
A PC
Infinix Hot 2 on Android 6.0
Recovery Enabler
TWRP
SUPER SU for Marshmallow
Xposed Framework for Marshmallow (Optional)
SP or Infinix Flash Tool
Your Brain
STEPS:
- Place BETA-SU-2.66.zip and xposed-v79-arm-sdk23.zip in your Internal/External SD Card.
- Install MT65xx/VCOM Drivers
- Download and Extract Infinix Flash Tool, TWRP Recovery, Recovery Enabler (place folders in your desired location)
- Open Infinix Flash Tool, click on browse and navigate to folder containing Recovery Enabler, select MT6580_Android_Scatter file and click start.
- Connect your phone to your PC (battery removed)
- Reboot after flashing.
- Do the same process for TWRP Recovery but do not reboot after flashing. Boot straight to Recovery
- Flash SuperSU
- On reboot, TWRP Prompts a message that SuperSU is not installed and asks to install it. Do not accept. Hit the back button and reboot normally.
(OPTIONAL FOR THOSE WHO NEED XPOSED)
- Install Xposed Installer apk and reboot to recovery
- Perform a Nandroid Backup
- Install xposed-v79-arm-sdk23.zip and reboot. (Do not clear anything)
- On reboot, TWRP Prompts a message that SuperSU is not installed and asks to install it. Do not accept. Hit the back button and reboot normally.
DOWNLOAD LINKS:
Infinix Flash Tool: https://mega.nz/#!YUVQESJI!yg0i_YquG7JLx8YTkUr-wkToLOU4Hr50AN931s4tBlY
Recovery Enabler: https://www.androidfilehost.com/?fid=24269982086997892
TWRP Recovery: https://mega.nz/#!lMchVCRR!-a8cQWiYO8k0XqIdr74vlNwAvWBBxz5-VoEPOp8NJSw
Special thanks to @Frazercrib for teaming up with me to get Marshmallow rooted + get xposed working on Marshmallow.
PS: Please see attached file below for SuperSU and Xposed zip, and Xposed Installer apk
SCREENSHOTS:
View attachment 3605089
View attachment 3605095
View attachment 3605096
Click to expand...
Click to collapse
Thanks for inspiring me, now we can do it simpler (magisk required) with https://github.com/Magisk-Modules-Repo/xposed i've successfully installed framework and some module with it, because I have been tried like your explained on this thread, working well-installed Xposed framework but when try to install module always got boot loop.
Now I'm used magisk-xposed on infinix x510.

{Android 7 - EMUI 5.0} VNS-L** C432B336 {FULL/LEAK} [13-12-16]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​Changelog B336:
Secutiry Paths
Rollout Beta Program
Changelog B329:
Fixed mobile data error's in B328
Files for DOWNLOAD:
Download this (update.zip B336): https://drive.google.com/open?id=0B0GHvV6H-yfOc2w1N3JrcE1yc2s (thanks to: @algnerd for mirror)
And download this data_full: https://drive.google.com/open?id=0B0GHvV6H-yfOT2Jra2E3UjF4ZDQ (thanks to: @algnerd for mirror)
Install process:
Recommended PROCESS if you are in B329 (NO WIPE-DATA PLEASE):
Download only update.zip from B336
Extract update.app from update.zip
Put update.app in External Sdcard /dload folder
Reboot with 3 buttons pressed
eRecovery starts installing auto...
Wait, and after reboot... boila you have the B336
Old process:
If your are in Android Nougat B328/B329, you need DOWNGRADE to Android MM for install this B329, for Downgrade see this post (sorry is in spanish use translator): http://www.htcmania.com/showthread.php?t=1261335
Transfer to external memory phone the two files downloaded (yes, in .ZIP)
Reboot in Meticulus Recovery
Flash the two files downloader (first the update.zip before WITHOUT REBOOT, the second file)
Reboot
Verify in Settings ---> About Phone, if Android 7 and EMUI 5
YOU HAPPY WITH NOUGAT!!!
HowTo by; @algnerd
If you have a L31 variant, here what you need to do:
Put Update.Zip and update_data_full_VNS-L31_hw_eu.zip on you external sd card;
1. Reboot into Meticulus' TWRP (use google don’t ask for it here);
2. Flash the update.zip;
3. Flash the update_data_full_VNS-L31_hw_eu.zip;
4. Flash Revolution Recovery for nougat (use google don’t ask for it);
5. Reboot the device;
6. Reboot into recovery;
7. Do a backup of Product;
8. Reboot into system and place the extracted files from Product_V3 in TWRP specific folder;
9. Reboot into recovery and restore Product;
10. Reboot and enjoy your camera.
If you want to root Nougat follow these steps:
1. Boot in Revolution Recovery
2. Flash RevolutionKernel_ROOT_Nougat_P9Lite_13-12-16.zip;
3. Reboot and install Phh's root app from the playstore;
If you want to downgrade to MM from booting Nougat:
You need to do this first:
1. Download “volver de Nougat a MM” from HTCMANIA;
2. Extract the files and copy 432oEMINFO-DUALSIM-P9LITE.ZIP to the root of your external SD card;
3. Download B150 (as it worked perfectly for me) extract it and put update.app in your dload folder (preferably on you external SD card. If you don’t have the folder create it);
4. Set the default storage to be the External SD card (search for it in settings);
5. Enable Use Debugging and OEM unlocking;
6. BACK UP ALL YOU IMPORTANT DATA AS YOU’LL LOSE EVERYTHING DURING THE PROCESS
Now that you’ve done the above:
1. Unlock your bootloader if it’s not already unlocked (google is your friend );
2. Flash, via fastboot, Revolution Recovery (google is a like the mom, it will find anything for you even if it is under your nose);
3. Reboot into Recovery;
4. Tape Install, set storage to be SD Card;
5. Look for the 432oEMINFO-DUALSIM-P9LITE.ZIP and flash it;
6. Power off your phone;
7. Press simultaneously vol +, vol – and Power, now it should be installing the new firmware (B150);
8. Once done, reboot and you should have a factory reset phone, configure it as you’re well aware of that;
9. Restore your files.
Click to expand...
Click to collapse
REGARDS!!!!
Original post: http://www.htcmania.com/showthread.php?t=1265029

I'm on c185b150 can i install it ??
Envoyé de mon HUAWEI VNS-L31 en utilisant Tapatalk

Ahmed00021 said:
I'm on c185b150 can i install it ??
Envoyé de mon HUAWEI VNS-L31 en utilisant Tapatalk
Click to expand...
Click to collapse
Yes.... And dont cuestion more about versions please

Ok thanks man
Envoyé de mon HUAWEI VNS-L31 en utilisant Tapatalk

Thanks for this, is it 100% safe for vns-l21? and can it be done without Meticulus recovery?

Yes its safe

It works in NON nougat twrp version(older)?

BadWolfYe said:
Yes its safe
Click to expand...
Click to collapse
Thank you I'm so excided about this, since I'm extremely noob with these things I think I'll wait until someone post some video tutorial if have a spare time

Hello and thank you for sharing this ! Can I flash it from CM13 ? And can I flash it from internal storage ?

jody2k said:
It works in NON nougat twrp version(older)?
Click to expand...
Click to collapse
Yes, actually you have to be on MM first.
Install process:
If your are in Android Nougat B328, you need DOWNGRADE to Android MM
Click to expand...
Click to collapse

Can I install it like OTA update ( only with putting the files in dload folder) ?? Or I need root and twrp installed ??

Noob question how Can i installiert mediculus Recovery ? I had twrp but now my Phone is unrooted and twrp is deleted

Camera fc

macijeep said:
Camera fc
Click to expand...
Click to collapse
Did you wipe before install?

Video review
Can someone do a video review of this rom/update?

macijeep said:
Camera fc
Click to expand...
Click to collapse
+1

Vinschir said:
Can someone do a video review of this rom/update?
Click to expand...
Click to collapse
+1

StefanSpiegel said:
+1
Click to expand...
Click to collapse
+1

macijeep said:
Camera fc
Click to expand...
Click to collapse
Same... Only camera... All others works...

I don't understand , does the camera work or not ?
Envoyé de mon HUAWEI VNS-L31 en utilisant Tapatalk

[BETA][DUK] TWRP 3.1.1-1 [+ROOT]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is only for Honor 8 Pro (DUK)
Code:
OpenKirin presents unofficial TWRP for stock EMUI 5.x.
Intended for usage on stock emui 5.x in combination with unlocked bootloader .
Installation Instructions
Code:
1. Enter fastboot mode on unlocked device
2. flash recovery using the following command: fastboot flash recovery twrp-3.1.1-1-duk.img
3. reboot to recovery!
Rooting Methods
Code:
[B][U]1. Official PHH Superuser Beta 310[/U][/B]
1. download and flash [URL="http://superuser.phh.me/superuser-r310-beta.zip"]official PHH Superuser Beta 310[/URL]
2. install "Phh Superuser" from Google Play
3. Enjoy!
Downloads
Code:
[LIST]
[URL="https://github.com/OpenKirin/android_device_honor_duk/releases/download/3.1.1-1/twrp-3.1.1-1-duk.img"][U]download twrp-3.1.1-1-duk.img[/U][/URL]
[/LIST]
FAQ
Code:
Q: What's the code status?
A: 25. June 2017
Q: which H8 Pro models are supported?
A: every model should be supported.
Q: Can i use this TWRP with decrypted /data?
A: Yes you can! (Check FAQ)
Q: Can i install Magisk?
A: No (encrypted /data), Yes (decrypted /data)
Q: Does official SuperSU work?
A: No (encrypted /data), Yes (decrypted /data)
Q: ETAs?
A: No.
Going back from decrypted -> encrypted?
Code:
1. Format /data inside of TWRP
2. Flash eRecovery & Kernel from your currently installed Stock ROM Build
3. Do a factory reset inside of eRecovery
5. Let device boot up
6. Install your current firmware hw_data package & SuperSU using TWRP again
Want to decrypt? No problem.
Code:
1. Format /data inside of TWRP
2. Flash a kernel with fileencryption disabled in fstab
3. bootup your device
Special Thanks
Code:
* [URL="https://forum.xda-developers.com/member.php?u=2335078"]surdu_petru[/URL]
* [URL="https://forum.xda-developers.com/member.php?u=7354786"]XePeleato[/URL]
XDA:DevDB Information
TWRP, Tool/Utility for the Honor 8 Pro
Contributors
OldDroid, surdu_petru, XePeleato
Source Code: https://github.com/OpenKirin/android_device_honor_duk
Version Information
Status: Beta
Created 2017-06-23
Last Updated 2017-06-25

Reserved
Changelog
Code:
[B]TWRP 3.1.1-1[/B]
* fix twrp on emmc based devices

Man that was fast. Will definitely flash this after I get my H8 Pro.
Sent from my Honor 8 using XDA Labs

Hello,
I tested the package, unfortunately after the flash and first boot impossible to return under android.
If I remember correctly there was a problem of mount point.
To get out I had to flasher the recovery and system partitions of the original rom.
Having to reset my phone I have no log, but if you need anything else do not hesitate.
@ +
Via google translate

blattes86 said:
Hello,
I tested the package, unfortunately after the flash and first boot impossible to return under android.
If I remember correctly there was a problem of mount point.
To get out I had to flasher the recovery and system partitions of the original rom.
Having to reset my phone I have no log, but if you need anything else do not hesitate.
@ +
Via google translate
Click to expand...
Click to collapse
this should work for every h8 pro utilizing emmc storage:
https://drive.google.com/open?id=0BxWP2gF_0Bd_OHBPWDctZmJCanc
It has been tested.
Regards

Can we use Magisk instead? Or the loop issue back in Honor 8 is also here?

OldDroid said:
this should work for every h8 pro utilizing emmc storage:
It has been tested.
Regards
Click to expand...
Click to collapse
I flashed it, it works fine.
Thanks

adriansticoid said:
Can we use Magisk instead? Or the loop issue back in Honor 8 is also here?
Click to expand...
Click to collapse
Magisk 13 works fine.
Just flashed the Magist beta and installed the Magisch Manager 5.

-=MoRpH=- said:
Magisk 13 works fine.
Just flashed the Magist beta and installed the Magisch Manager 5.
Click to expand...
Click to collapse
That's great news. Thanks for confirming. :highfive:
Sent from my Honor 8 using XDA Labs

I flashed emmc version and supersu. For going in twrp I've to clic in the middle of the volume button and the power on.

Interesting, i tried to install it but i'm stuck with installion...i know how to enter fastboot mode with phone plugged to my computer with android sdk on, but the adb files look to be missing when i check with cmd...
Can anyone here give a quick tutorial ? Thanks

New Version (3.1.1-1) available - You can find more infos in OP.
This release fixes partition mounting on emmc 5.1 based devices
Source code is now also up and can be built!
https://github.com/OpenKirin/android_device_honor_duk
Regards

Wow that was faster than I could learn to do it.
Great job. May I ask how you got the important informations to build this?
Did you inject su into the image to gain root and then read all the detailed data through terminal or adb or root file explorer?
Just asking cause i train my brain more and more in my spare time and want to get behind the knowledge base to learn. :good:

First of all thank you for your work, I got the Recovery, root, Magisk, etc. running.
I have 2 Questions:
1. the internal storage when I boot to the recovery looks like enrypted (lots of random named folders). Is it possible to decrypt it for now, since there is currently no custom kernel available?
2. Can I flash the Firmware update to 130b in TWRP? If yes, wich package do I need to choose?
Cheers

Would this work on the Chinese V9 variant?

smouker said:
First of all thank you for your work, I got the Recovery, root, Magisk, etc. running.
I have 2 Questions:
1. the internal storage when I boot to the recovery looks like enrypted (lots of random named folders). Is it possible to decrypt it for now, since there is currently no custom kernel available?
2. Can I flash the Firmware update to 130b in TWRP? If yes, wich package do IP need to choose?
Cheers
Click to expand...
Click to collapse
Format the whole internal storage to remove encryption.

adriansticoid said:
Format the whole internal storage to remove encryption.
Click to expand...
Click to collapse
can I restore Data via TWRP without problems?

adriansticoid said:
Format the whole internal storage to remove encryption.
Click to expand...
Click to collapse
After testing, formatting the whole internal storage does not work.
To restart the partition is new encrypt

smouker said:
can I restore Data via TWRP without problems?
Click to expand...
Click to collapse
Yes it should work. Just make sure that both backup and restore destinations are either both encrypted or both decrypted.
blattes86 said:
After testing, formatting the whole internal storage does not work.
To restart the partition is new encrypt
Click to expand...
Click to collapse
What do you mean to restart the partition is new encrypt?

adriansticoid said:
Yes it should work. Just make sure that both backup and restore destinations are either both encrypted or both decrypted.
What do you mean to restart the partition is new encrypt?
Click to expand...
Click to collapse
sorry for my bad english.
After restart the phone...

[RECOVERY][on7xelte] TWRP 3.3.0 for Galaxy J7 Prime

Team Win Recovery Project​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about doing this to your device
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Disclaimer:
- Please read the whole main post & related ones before proceed and follow the guide as it is wrote. I will not offer support for any issues that have been already stated.
- Your Knox Warranty Bit will be blown once you flash this or others custom binaries, preventing you to use Knox TZ Features. It can't be reset in any way, so think twice before flashing this.
- Bugs can be reported here in XDA or via our Telegram Group. Please be more clear as possible and make sure you provide detailed info when reporting bugs (device variant and logcat).
- If you like my work please hit the "Thanks" button to support me. You're also free to donate me via my donation link here in XDA.
Installation:
- Download Odin3 v3.13.1, Samsung USB Drivers, latest TWRP's tar for your variant, latest no-verity-opt-encrypt zip and copy all of them to your internal storage.
- Go to Settings App, Developer Options and enable OEM Unlock (If you don't see Developer Setings, go into About phone>Software info and tap "Build number" 10 times to show Developer Options menu).
- Do a backup of all your important data and files in your phone.
- Shutdown the phone. Once it's off, Power it On in Download Mode (Press and hold Vol DOWN and Power buttons together )
- Open Odin3, go in Option section and untick "Auto-reboot". Once that click the "AP" button and select the TWRP tar you downloaded before, then press the "Start" button.
- Once Odin3 finished to flash the recovery (you should see a "PASS" message), force reboot your phone (Press and hold Power and Vol - buttons together) and once the screen is off, press and hold Power and Vol + buttons together to boot in TWRP.
- Once TWRP is booted you first need to decrypt your /data partition. To do so touch Wipe>Format Data and follow the instructions in screen.
- Once it finished go back at the home screen and touch Reboot>Recovery. TWRP should be able to mount your data partition. Now flash the no-verity-opt-encrypt zip you downloaded before (touch Install and select each zip to flash it)
- You're now able to reboot to your OS without re-encrypting /data partition .
Download:
TWRP 3.3.0 (taking down due to a bug, will fix and upload asap)
TWRP 3.2.3
Previous Builds:
TWRP 3.2.2
TWRP 3.2.1
TWRP3.2.0
Bugs:
Cannot mount External SD Card in TWRP
Changelog:
17 April, 2019 (TWRP 3.3.0)
Updated to TWRP 3.3.0.
Read full changelog over here and here.
Credits:
- Samsung Open Source Centre for kernel source code
- TeamWin for their awesome recovery

Awesome work bro thanks for Ur efforts, can you plzz try to fix that bug :fingers-crossed:

Wth ? Ss show that the version is 3.0.0 !

I need this recovery in the formats. img, please don't have a computer[emoji120]

al.iraq said:
I need this recovery in the formats. img, please don't have a computer[emoji120]
Click to expand...
Click to collapse
Root explorer to extract the tar or zarchive
Sent from my Samsung SM-G955F using XDA Labs

Demicro said:
Root explorer to extract the tar or zarchive
Sent from my Samsung SM-G955F using XDA Labs
Click to expand...
Click to collapse
Thank you very much sir, I forgot this. Now remember it thanks again[emoji257]

I can't seem to get the interface to navigate any of the partitions or data directories.
If I move the supersu zip to the phone, I can't find it at all, if I try to mount an sd card, it mounts the wrong file contents somehow.
Something is wonky with the disks

does support SM G610Y?

Working fine.

TWRP 3.2.1
CHANGELOGS
-F2FS support
-Updated TWRP to 3.2.1

DarkLord1731 said:
Team Win Recovery Project 3.2.1
HOW TO INSTALL
Install via ODIN in AP section
OR
If you have TWRP already installed you can extract the downloaded tar and install via recovery(INSTALL -> Select Image -> Flash)
Click to expand...
Click to collapse
But to install by Odin is not it necessary that the file be MD5? How can I get a MD5 file to a first install?

Kherham said:
But to install by Odin is not it necessary that the file be MD5? How can I get a MD5 file to a first install?
Click to expand...
Click to collapse
No it isn't necessary, you can install tar files

DarkLord1731 said:
No it isn't necessary, you can install tar files
Click to expand...
Click to collapse
Am asking because I tried many times install it by Odin with a .tar file and didn't worked. Will put this one in my card for another try.
Thank you very much.

Can I flash on G610L

can you suggest me how to flash or install on this TWRP since it didnt recognize my internal and external memory :<. Tried to use USB cabble but no result too.

i need some help i install the twrp and make it work but when i am try to see any file from sd card or any i cant so i cant install this rom. SdCard Looks empty but its not

i install this recovery in samsung j7 prime odin showing succesfully install but when i try to boot into recovery it is directly boot into stock recovery. help me

no-verity-opt-encrypt.zip
Sir I was wondering on how can I install this zip "! (no-verity-opt-encrypt.zip)
I installed the recovery and it worked fine for me " thanks for that "!:laugh::good:
---------- Post added at 12:32 PM ---------- Previous post was at 12:28 PM ----------
Baqir2 said:
i install this recovery in samsung j7 prime odin showing succesfully install but when i try to boot into recovery it is directly boot into stock recovery. help me
Click to expand...
Click to collapse
Sir I installed this and working fine"!
what I did is I installed it and test to see if its working and no its not and after
I installed it again and tick the auto reboot on odin
and patch it then press and hold the combo for going into download even tho in it and after or immediately the screen goes black press the combo for going into recovery and wolla enjoy I hope this helps "!
sometimes it helps reading the instrucyions carefully "! ???

Deleted

For ppl having trouble to mount internal memory follow these steps:
You have to first Flash TWRP Recovery From Odin
Then on TWRP go to Advance>Wipe And Press Format Data And Type Yes
Then your Internal storage will be able to mount while connected to the PC
And you can now drag zips to flash on your Internal memory via PC
Running perfect on my G610Y

[27/02] [OFFICIAL] [Face Unlock ] Oxygen OS 5.0.4 [TUT-Root] [No Data loss] [Mirror]

Hi everyone,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
We are pushing the incremental roll-out of OxygenOS 5.0.4.
The build will be continuing to release here shortly. Remember this is a staged roll out, so it will take some time to get out to everyone.
Changelog For 5.0.4 :
=> Bug Fixes
=> Fixed NO ringtone for incoming calls and notifications
=> Fixed Audio quality related issues during video playback
Changelog For 5.0.2:
=> Camera
Supported EIS for Video Recording
=> Applications
New launcher V2.2
New Gallery V2.0
New Weather v1.9
New File Manager V1.7.6
=> System
Added Face Unlock Function <3
General Bug Fixes And Improvements
Added CPU security patch: CVE-2017-13218
Changelog For 5.0.1 :
=> Bug fixes for third party camera application
=> Fixed network issues for European operators
Changelog For 5.0 :
=> Updated to Android O (8.0)
=> Launcher
Optimizations for Shelf
Now you can upload your photo through Shot on OnePlus
=> Camera
New Camera UI design
Optimizations for photo quality
Added beauty effect for Portrait Mode
=>Gallery
Added “Places” tab for viewing photos on a map
=>Calculator
Added history feature
=>Clock
Added alarm calendar feature
=>System
Added Parallel Apps feature
New design for Quick Settings
New design for Lift up display
Added “Adaptive model" screen calibration
Optimizations for Wi-Fi
Optimizations for Battery Saver
Updated Android security patch to December
Have a great weekend everyone!!!
Never Settle. :fingers-crossed:

Download Section :
ROM :OOS 5.0.2
Google Drive soon || OFFICIAL Link ||Mega Drive Soon
ROM :OOS 5.0.2
Google Drive || OFFICIAL Link ||Mega Drive Soon
OOS 5.0.1
Google Drive || OFFICIAL Link ||Mega Drive
OOS 5.0
Google Drive || OFFICIAL Link || AFH
Recovery:
Codeworkx TWRP ||
Blu_Spark TWRP || Stock Recovery || Chinese Recovery
For Root :
Magisk Beta
SuperSU​

[OFFICIAL][Stable Oreo 8 ] Oxygen OS 5.0 Update[Tutorial-Root][No Data Loss][Mirror]
FLASHING INSTRUCTION :
Warning : Always Backup Your Internal Storage For safer side
Note 1: For users Who are coming From Open Beta and Any other N Based custom roms, try Method 2. Dont dirty Flash the rom if u dont need any bug. [Recommended]
Note 2 : Remove the pattern and also fingerprints before flashing the rom.
Still if you wish to dirty flash official rom over open beta, it works fine.
METHOD 1: Using TWRP recovery [ For Decrypted Users]
If you are on some other twrp versions, Kindly download Compatible TWRP recovery IMG file from download Section and Flash it in recovery.
Codeworkx recoveryworks Fine. I recommend all to use his recovery.
Step 1: Place the Full ROM zip file in internal Storage
Step 2: Now Reboot the phone to TWRP Recovery
Step 3: Wipe Dalvik cache ,Data , System and Cache
Step 4: Now select Full ROM zip file to Flash And flash the recovery.img againand then reboot to recovery.
Step 5: Flash magisk 15.2 or supersu zip file now. P.S. Supersu gives bootloop as of now.
Step 6: Now Flash the No-verity file from here [Important]
Step 7: Reboot the phone.
METHOD 2: Coming from OOS 5.0 [Dirty Flash Method] [ Encrypted Users ] [No Data Loss]
Step 1: Copy the Full ROM 5.0.1 zip file to internal storage.
Step 2: Reboot phone to recovery
Step 3: Make sure you are on latest Twrp-3.2.1-0-oreo-8.0-codeworkx twrp recovery or Any other Oreo Compatible recovery.
Step 4: Wipe Cache, Dalvik Cache and Now select the Full ROM 5.0.1 zip file and swipe to flash the rom.
Step 5: Now Flash Magisk 15.2 file.
Step 6: Flash the Recovery.img file [ Oreo Compatible recovery] and then again reboot to recovery.
Step 7 : Wipe Cache again and reboot the phone.
METHOD 3 : Update using OTA [ Working fine For Encrypted users ]
Step 1: If you are on stock OOS 5.0 with Non-rooted and also on stock recovery, Just Use any Canada VPN, you will get OTA update Notification.
Step 2: Download the OTA and press Install .
Step 3: Now the phone reboots and flashes the update in stock recovery.
Step 4: Now reboot the phone .
METHOD 4 : Using Stock Recovery
Step 1: Place the downloaded Full ROM zip file in internal storage.
Step 2: Now Reboot the phone to Stock Recovery
Step 3: Wipe Cache.
Step 4: Now select Full ROM zip file to Flash.
Step 5: Now wipe Cache and Factory Reset
Step 6: Reboot the phone.
For users Who are facing Bootloop after completing all Steps, it means your phone is encrypted. So you have to wipe your internal storage to make your phone to boot.

INSTRUCTION TO ROOT :
Step 1: Download the Supersu or Magisk zip file From download Section. P.S. Supersu gives bootloop as of now. So Magisk is recommended.
Step 2: Now reboot the phone to TWRP Recovery.
Step 3: Select the Downloaded Supersu or Magisk zip file and Flash it.
Step 4: Reboot the phone

Rooting guide?

ShiShTuBaBu said:
Rooting guide?
Click to expand...
Click to collapse
on process

what is the procedure if I am updating via ota (stock recovery) unrooted ? thx

marko94 said:
what is the procedure if I am updating via ota (stock recovery) unrooted ? thx
Click to expand...
Click to collapse
Just wait till you get notification or use VPN (Canada or Germany) to get it faster. Then just download and install. No need to do anything else

HatRiGt said:
FLASHING INSTRUCTION :
METHOD 1 : Using Stock Recovery
Step 1: Place the downloaded Full ROM zip file in internal storage.
Step 2: Now Reboot the phone to Stock Recovery
Step 3: Wipe Cache.
Step 4: Now select Full ROM zip file to Flash.
Step 5: Now wipe Cache and Factory Reset
Step 6: Reboot the phone.
METHOD 2: Using TWRP recovery
Step 1: Place the Full ROM zip file in internal Storage
Step 2: Now Reboot the phone to TWRP Recovery
Step 3: Wipe Dalvik cache ,Data , System and Cache
Step 4: Now select Full ROM zip file to Flash.
Step 5: Reboot the phone.
Click to expand...
Click to collapse
What if I'm on OB2, does the first method work?

Can i normaly flash SU after i flash the room with TWRP?

I'm on leaked beta 3. No root no custom recovery what should I do?

how much time it need to update, it updated and now it is in bootanimation for 4-5 minutes ? what now ?

Can anyone check what version of play services are installed 440 or 940?

markvanwoerden said:
What if I'm on OB2, does the first method work?
Click to expand...
Click to collapse
wipe all and try method 2 if u r using twrp.

umutcezarap said:
I'm on leaked beta 3. No root no custom recovery what should I do?
Click to expand...
Click to collapse
flash the blu_spark custom recovery and the follow 2nd flashing method

Hi, i'm using beta2.can i install without fullwipe? (just wipe system, cache&davik cache). because i dont want reinstall apps ((

When i've installed the OB1 I had to wipe the internal storage beacuse twrp recovery wasn't able to decrypt it, after when i've installed the update to OB2 i've dirty flashed the update and only wiped cache/dalvik. now should i wipe only system, data and cache right? Or i must wipe also the whole internal storage?

mark264 said:
Can i normaly flash SU after i flash the room with TWRP?
Click to expand...
Click to collapse
yes u can flash it .

I installed the rom over the second open beta. No problems. I also installed magisk 14.6 and it works.
romano19 said:
Hi, i'm using beta2.can i install without fullwipe? (just wipe system, cache&davik cache). because i dont want reinstall apps ((
Click to expand...
Click to collapse

romano19 said:
Hi, i'm using beta2.can i install without fullwipe? (just wipe system, cache&davik cache). because i dont want reinstall apps ((
Click to expand...
Click to collapse
Yes, you can. Just wipe cache from recovery afterward. You should be good.
Anyone able to capture the OTA zip from 4.5.15 to 5.0?