Huawei P9 EVA L19 Doesnt Have emui 5 update yet, Why? - Huawei P9 Questions & Answers

Why didnt i receive the update yet? I Have stock frimware and locked boot loader, I live in the philippines it should be available

Related

P9 EVA-C900B180 how to update to nougat??

anybody know how to update to nougat?
I have branded p9 eva-l09bc150b140 (emui 4)
use firmware finder from gplay and update with latest and now I am stuck to eva-c900b180 emui 4.1.1 ??
now finder dont have any new firmware...
wtf??
please help..
You will never get updates with your cust i think...u need to change cust to 432 for unbranded European version und the cust for your region

Honor 3C Firmware help/info needed.

Hi... i install b320 firmware, but initially it was showing CUST ERROR and now phone stuck on Huawei logo. i heard B310 firmware is good in working for Pakistan. So can i install b310 on b320 firmware through SD / dload method ? if not then how to do it ... looking for your help... thanks.

LX1 offering L11 update

Hello guys,
I haven't received any update for my PRA-LX1C02B148 for 10 months, so decided to try with Firmware finder, and I updated up to PRA-LX1C02B162. Now, the next version is, and I'm not sure should I update it, Prague-L11C02B163. I also noticed there is Oreo update on Firmware finder but it says I'm not ready for that update.
So please, help with this L11, what should I do?
You can safely update. Afaik l11 is pra-lx1 single sim, and l31 is pra-lx1 dualsim. There is also l21.

Huawei P9. porting EMUI 9 firmware.

Hello. I have a Huawei P9 EVA DL00, on it EMUI 8.0.0 / Android 8.0.0. Is it possible to port the EMUI 9 firmware from Huawei P10 / Honor 9 or another device to our P9 on it. We have Kirin 955, and on the Huawei P10 / Honor 9 Kirin 960. Who can port?
It's is possible?!
mybe with gsi and erfans scipt
sGSI
different partition table...
P9 Eva l09 android 6.0
Hi everyone!
We are on 2019 lol and my eva-l09 didnt update any More, im stucked at android 6.0.
Any ideas? Im worried if I have to mannualy updated it because i have a bad experience with that.
I had before a gx8, ive mannualy updated the stock rom and like Many others i had no signal, so i did a flash to roll back and my fingerprint sensor stopped working (i couldnt Solve that)
Thanks!
marcod_9 said:
Hi everyone!
We are on 2019 lol and my eva-l09 didnt update any More, im stucked at android 6.0.
Any ideas? Im worried if I have to mannualy updated it because i have a bad experience with that.
I had before a gx8, ive mannualy updated the stock rom and like Many others i had no signal, so i did a flash to roll back and my fingerprint sensor stopped working (i couldnt Solve that)
Thanks!
Click to expand...
Click to collapse
I don't know have you really been originally on that cust c451, or you rebranded to c451 as part of going back to stock / rolling back to MM
Anyway, c451 is a dead end, check on FirmwarFinder or at:
https://pro-teammt.ru/firmware-database/?firmware_model=EVA-L09c451
you will see that EMUI 4.1, b131/b132 are the last ever firmwares for c451
You need to rebrand to some 'proper' cust like c432 (European), c636, or so, to be able to obtain OTA updates up to EMUI 5, like it was described here:
https://forum.xda-developers.com/showpost.php?p=72153575&postcount=2
Rebranding to c432 is crucial. If updating to b182 as described there will fail, you should be able to reinstall c432 b182 (or newer c432) by eRecovery, or by flashing service restore c432b182 (but there are no service restores for c451 and no Nougat firmwares for c451)
zgfg said:
I don't know have you really been originally on that cust c451, or you rebranded to c451 as part of going back to stock / rolling back to MM
Anyway, c451 is a dead end, check on FirmwarFinder or at:
https://pro-teammt.ru/firmware-database/?firmware_model=EVA-L09c451
you will see that EMUI 4.1, b131/b132 are the last ever firmwares for c451
You need to rebrand to some 'proper' cust like c432 (European), c636, or so, to be able to obtain OTA updates up to EMUI 5, like it was described here:
https://forum.xda-developers.com/showpost.php?p=72153575&postcount=2
Rebranding to c432 is crucial. If updating to b182 as described there will fail, you should be able to reinstall c432 b182 (or newer c432) by eRecovery, or by flashing service restore c432b182 (but there are no service restores for c451 and no Nougat firmwares for c451)
Click to expand...
Click to collapse
Thanks for the reply,
No, ive been originally on c451. I dindt change anything on this device. I bought it at amazon almost 3 years ago, and apparently it was a "telstra" phone, i think from Australia, altought in amazon it said unlocked. Now im using Movistar network in Argentina.
Ok then, the question is, is there any way to know that after rebranding to c432 or another cust my device will work properly? i mean phone signal (the most important thing), camera, fingerprint sensor, etc.
marcod_9 said:
Thanks for the reply,
No, ive been originally on c451. I dindt change anything on this device. I bought it at amazon almost 3 years ago, and apparently it was a "telstra" phone, i think from Australia, altought in amazon it said unlocked. Now im using Movistar network in Argentina.
Ok then, the question is, is there any way to know that after rebranding to c432 or another cust my device will work properly? i mean phone signal (the most important thing), camera, fingerprint sensor, etc.
Click to expand...
Click to collapse
Hardware is always the same, rebranding puts the other cust.
And with cust c432 you should receive OTA updates up to b504/b505
If not, for some reason (then it is possible to force DLOAD or HWOTA updates
Btw, responding you now from L09c432 rebranded to AL10c00 (Chinese), with Oreo b540 (Oreo was released for P9 only in China) and with some adaptations (Chinese firmwares are specific), everything works ok.
If you search throughout XDA, you will find many users (for all kinds of Huawei models) rebrand here and there, usually to c432 or c636 since they obtain faster and more updates (except for Chinese AL10, AL00, DL10 and alike that get first and farthest OTA updates, but Chinese firmwares require adaptations to become useful worldwide: bloatware, missing GApps, missing intl languages and configurations for intl carriers, and so)
Btw, didn't you previously say that you returned to stock (from custom ROM?) - in that case you must have Bootloader code (for rebranding you need to start with the unlocked Bootloader - have also OEM/FRP unlocked)
Edit: Btw, this is a wrong thread for discussing the update of stock MM firmware to Nougat
zgfg said:
Hardware is always the same, rebranding puts the other cust.
And with cust c432 you should receive OTA updates up to b504/b505
If not, for some reason (then it is possible to force DLOAD or HWOTA updates
Btw, responding you now from L09c432 rebranded to AL10c00 (Chinese), with Oreo b540 (Oreo was released for P9 only in China) and with some adaptations (Chinese firmwares are specific), everything works ok.
If you search throughout XDA, you will find many users (for all kinds of Huawei models) rebrand here and there, usually to c432 or c636 since they obtain faster and more updates (except for Chinese AL10, AL00, DL10 and alike that get first and farthest OTA updates, but Chinese firmwares require adaptations to become useful worldwide: bloatware, missing GApps, missing intl languages and configurations for intl carriers, and so)
Btw, didn't you previously say that you returned to stock (from custom ROM?) - in that case you must have Bootloader code (for rebranding you need to start with the unlocked Bootloader - have also OEM/FRP unlocked)
Click to expand...
Click to collapse
OK thank you! iwill do it
no, i was telling what happened with a previous device, gx8.

Downgrade ALE-L21C55 From Android 6.0 to 5.1

Hi, i have a huawei p8 lite ALE-L21C55 (Branded by TIM) ITALIAN PHONE
i need to unlock the bootloader so i need to downgrade from emui 4.0.3(Android 6.0) ti Emui 3.1(android 5.0.1)
The problem is because its branded by TIM(www.tim.it) it will not accept any FULL OTA firmware who is "No Brand"
The main problem i find B170 update only in OTA-MF(Partial Upgrade) and there isn't any FULL OTA firmware for B170 and lower.
Anyone can help me? REMEMBER. NO BRAND FIRMARE WILL CAUSE FLASH FAIL DUE TO CARRIER CUSTOMIZATION
I need after to root and get bootloader code
Thanks

Categories

Resources