Database Develop

[Q] One not detected properly in fastboot mode

Hi there,
I`ve got the following Problem:
My One is not detected properly in fastboot mode, adb works like a charm (all cmds working)
In fastboot mode windows says that the device cannot be started (code 10) and cmd cannot find the device and it`s also not charging in fastboot...
I`m using Windows 8 and I know that there are problems with driver signatures, so I disabled the checks through advanced boot, uninstalled all drivers and reinstalled them (the strange thing is, it worked like a charm with my HOX)
After that still the same issues... Then I uninnstalled the HTC drivers and tried the drivers from Google SDK and after that the drivers from PDAnet but nothing helped...
Then I read that there are Problems with USB3.0 and fastboot but I only got USB3.0. So I tried different USB ports and reconnected many times (about 30 times) and maybe the phone says "fastboot USB" but in cmd it`s still not detected...
As I said before with my HOX it worked like a charm... (also Win8 and USB3.0)
Any ideas?
Thanks for your help!
togx

Try disabling Fastboot in the Power Settings.

I tried it again with fastboot disabled but it still doesn`t work... :/

same problem here....

envoy_467 said:
same problem here....
Click to expand...
Click to collapse
hey envoy_467,
I found a solution for this issue:
It seems that microsoft´s own driver for the Intel USB3.0-Host breaks the support for several devices. You can install the Intel drivers for Win7 on Win8 (search google: Windows 8 and Intel USB3.0 host controller there should be a link to plugable. I´m not able to post links cause I don´t have enough posts...) but it only works with the Intel host.
Hope it will help you too!
greetz,
togx

usb device not recognized
I'm having a similar problem using windows 8, but I tried both my usb 2.0 and 3.0 ports but results in same problem. I have a t-mobile HTC One S (JB 4.1.1). Everytime I try to do the fastboot to get my token id my pc tells me my usb device is not recognized. Does anyone have any suggestions? Thanks in advance!

Try THIS

Sorry to bump this thread, but it's better than creating a new one.
Anyway, I have the same issue as the others here: fastboot won't work at all.
Btw, I've tried all possible solutions but installing the intel driver isn't possible due to a limitation on Windows + Intel 8 Series.
Windows 8, Intel 4th generation processor (8 Series/220) on a Gigabyte GA-Z87N-WIFI.
USB eXtensible Host Controller driver by Microsoft can't be modified to work with the Intel 8 Series driver. When trying to install it it says that my PC doesn't have the requirements to install the program (driver can be found here -- 8 Series ONLY!!) probably because I'm on Windows 8 (no, setting the app to run with Win7 compatibility mode doesn't work either).
Using Naked Driver 0.72..
Has anyone tried with a virtual machine? Maybe I could install Ubuntu on a VM to test it when I get the time.
Any other ideas?

VM doesn't work.. Since Windows won't recognize the phone while on fastboot that means that the VM Linux won't find the devide either.
LiveUSB won't install the android SDK either.. I'm stuck..

FIXED, kinda.. Workaround on Linux.
More info:
Just did it..
But not on Windows..
I've created a LiveUSB from Ubuntu 12.04 using the "Universal USB Installer" from: http://www.pendrivelinux.com/downloads/
When creating the LiveUSB I've created with 4gb (4096mb) of free space on a 16gb flash drive just in case, but you can make it work with a 4gb flash drive.
Then I installed the Android SDK.
Then I was able to use fastboot to change the CID to 11111111.. Working great.. Now let's download the developer ruu..
Tutorial used to install the SDK: http://askubuntu.com/questions/318246/complete-installation-guide-for-android-sdk-on-ubuntu
To run all commands faster, just type "sudo su" before starting. After that type "apt-get -f install" to clean everything.
Remember: To install anything the tutorial asks you have to use the command "apt-get install name-of-package", where the name is the item the tutorial says.
Go up to Step 4.
Download and Unzip/extract the AndroidSDK to the desktop (just the SDK, you don't need the full bundle).
Go to the unzipped folder, go to the Tools folder, double click "android", run in terminal, install the SDK and the TOOLS.
When finished, open a terminal window, navigate to your unzipped folder, than navigate to platform-tools and use the command "./adb" and "./fastboot" to work your magic..
Edit: Still not able to install the RUU..
At least now I have the phone ready.. Just have to find a new PC to install the RUU..

[Q] ADB device not found

My ADB is not working... So basically I messed up my HTC ONE by formatting the whole device including system... I'm not sure what to do now. My ADB isn't working. Ive updated the ADB drivers, and updated SDK for Google. My device is not detected by my computer. When i'm in fastboot mode my phone is detected. Is there any other way of pushing a file to my device?

exactly where im at, my windows 8 cant detect but my windows 7 can detect once i move the thing down to fastboot. Shows "Android 1.0"

sasaphrazz said:
exactly where im at, my windows 8 cant detect but my windows 7 can detect once i move the thing down to fastboot. Shows "Android 1.0"
Click to expand...
Click to collapse
I dunno cause I'm on Windows 8.1... I was on Windows 7 but upgraded due to a feature for my gfx card being limited on Windows 7... Havent got ADB working on my Mac either.

PeterZhao478 said:
I dunno cause I'm on Windows 8.1... I was on Windows 7 but upgraded due to a feature for my gfx card being limited on Windows 7... Havent got ADB working on my Mac either.
Click to expand...
Click to collapse
try this, im currently sideloading a rom on my phone right now: http://forum.xda-developers.com/showthread.php?t=2139767

[SOLVED] Please Help! Can't get fastboot to recognize device, but adb does

Former-Prime R1 HD 16GB
Windows v8.1
TL;DR:
I am unable to get my phone to be recognized in fastboot by the fastboot utility, yet it is recognized by adb. I've tried a couple of different sources for drivers, both signed and unsigned. Each time I've installed drivers I've gone into Device Manager and removed previous disconnected device instances along with the drivers (checked remove driver box). Besides the fact that adb sees the phone fine with the cable I'm using, it's the same cable I have successfully used with my Samsung and Nexus devices. I'm at my wit's end. :crying: I could really use some help.
Full version:
I've followed the instructions from this thread to flash my phone into an OEM non-Prime device:
https://forum.xda-developers.com/r1-hd/how-to/guide-convert-to-prime-rollback-ota-t3432499
It's now running V12. I want to verify the state of the bootloader and jump through the hoops to safely put V17 on it (without whacking the preloader, etc.). My problem is that when I try fastboot devices no devices are listed. However, adb devices shows the phone.
I installed ADB and fastboot v1.4.3 using the package from this thread:
https://forum.xda-developers.com/showthread.php?t=2588979
I've tried a couple of different sources for drivers, both signed and unsigned. Each time I've installed drivers I've gone into Device Manager and removed previous disconnected device instances along with the drivers (checked remove driver box). I've got tzul's signed drivers installed which were obtained from this post using the enclosed instructions (both those in the "Android" and "CDC" folders):
https://forum.xda-developers.com/showpost.php?p=67927242&postcount=23
I also have the Android SDK's Platform Tools and Google USB driver installed and tried the adb and fastboot from there with the same results.
When booted to the Android OS, the phone shows up as Android Composite ADB Interface in Device Manager. When I use adb to try and reboot the phone into fastboot via adb reboot fastboot it merely reboots into the OS. To get into fastboot mode I have to do it via the bootloader (power+vol. up). When attatched in fastboot mode the phone shows up in device manager under "Other devices" as "Android" with The Yellow Triangle of Doom, and says drivers for the device aren't installed (Code 28). From what I've read, the drivers it's looking for are the in the "Android" folder of the drivers .zip I downloaded, which I have installed per the instructions.
Can someone please help me figure out what I've done incorrectly?

Fixed
As I had surmised, it was a driver issue. One of the driver bundles I had downloaded from androidmtk.com or another site foobar'd me. But before I had this straightened out, I gave up and used a Linux Mint virtual machine to verify my bootloader status, etc.
The way my drivers got straightened out was that I coincidentally ran Windows Update as I had updates available for which enough time had passed without reports of problems. Update offered me the following updates:
Important
Windows 8.1 Drivers
Microsoft - Other hardware - MTP Device
TP-LINK - Other hardware - Android Bootloader Interface
Windows 8.1 and later drivers
Samsung - Other hardware - Samsung Mobile MTP Device
Optional
Windows 8.1 Drivers
MediaTek - Other hardware - Android Composite ADB Interface
After installing these I again tried to use fastboot from my Windows box and it worked fine. So, one of the driver packs I installed screwed up my MTP drivers evidently (both the updates offered were from early last year). The TP-LINK driver was the VCOM I needed for fastboot to work.
So, all's well that ends swell.

Amazon Prime running on V.6.1
Windows 7 x64
I am having similar issues but I don't fully understand how the OP solved this problem. I believe I am connecting properly with ADB but no response from fastboot. Here is what I have done so far:
1) Installed the "15 Sec ADB Tool". Drivers seem to be working but could not located the ADB folder the tool was supposed to create. I suspect drivers were installed correctly because under Device Manager I have "Android Phone > Android Composite ADB Interface"
2) Directly downloaded latest SDK Platform Tools, which includes adb.exe & fastboot.exe, among other files. Tried testing the tools with the following results:
C:\Users\Phantom\Dropbox\Personal\IT\Android\SDK Platform Tools\platform-tools>adb devices
List of devices attached
* daemon not running. starting it now at tcp:5037 *
* daemon started successfully *
5DFYRKKFQWBEQ4LJ unauthorized
C:\Users\Phantom\Dropbox\Personal\IT\Android\SDK Platform Tools\platform-tools>fastboot devices
C:\Users\Phantom\Dropbox\Personal\IT\Android\SDK Platform Tools\platform-tools>
Phone is turned on while doing the commands above. Could someone shed some light? Is the ADB response adequate? And should I get a fastboot response as well? If so, what could be the problem?
Lastly, phone has UBS Debug mode enabled.
Thanks in advance!

OldSkewler said:
Amazon Prime running on V.6.1
Windows 7 x64
I am having similar issues but I don't fully understand how the OP solved this problem. I believe I am connecting properly with ADB but no response from fastboot. Here is what I have done so far:
1) Installed the "15 Sec ADB Tool". Drivers seem to be working but could not located the ADB folder the tool was supposed to create. I suspect drivers were installed correctly because under Device Manager I have "Android Phone > Android Composite ADB Interface"
2) Directly downloaded latest SDK Platform Tools, which includes adb.exe & fastboot.exe, among other files. Tried testing the tools with the following results:
C:\Users\Phantom\Dropbox\Personal\IT\Android\SDK Platform Tools\platform-tools>adb devices
List of devices attached
* daemon not running. starting it now at tcp:5037 *
* daemon started successfully *
5DFYRKKFQWBEQ4LJ unauthorized
Click to expand...
Click to collapse
This shows adb is on , on your phone but you did not allow the connection. =. When you first connect pc to phone with usb cable and adb enabled , you should get a pop up window on the phone. You may need to wake the screen and unlock to see it. The window asks you to authorize the connection
OldSkewler said:
C:\Users\Phantom\Dropbox\Personal\IT\Android\SDK Platform Tools\platform-tools>fastboot devices
Click to expand...
Click to collapse
You also missed a step here. You needed to reboot phone to bootloader /fastboot mode before asking to list fastboot devices.
So before that line you should have done "adb reboot bootloader"
OldSkewler said:
C:\Users\Phantom\Dropbox\Personal\IT\Android\SDK Platform Tools\platform-tools>
Phone is turned on while doing the commands above. Could someone shed some light? Is the ADB response adequate? And should I get a fastboot response as well? If so, what could be the problem?
Lastly, phone has UBS Debug mode enabled.
Thanks in advance!
Click to expand...
Click to collapse

mrmazak, you are absolutely right on both items. I wish I had come across something explaining this earlier... spent a lot of time sorting this out!
Hopefully this will help someone in the future!

Request Driver for ADB Detection CMD for NOKIA 8

I have a problem after updating to latest June Security patch for Nokia 8 TA-1004. I had installed driver long time ago when I wanted to obtain root and there I did it. However, after updating to latest patch which also causes to lose root, I couldn't get my phone to detect adb in cmd. I tried reinstalling driver but still not working. USB Debugging is also on. What could this be the problem? I need help. I want to obtain root back. Thank you very much in advance.

Is your adb up to date? I'm using the latest version of Minimal ADB and Fastboot with bundled driver from my TA-1052, works like a charm.

Get that fork of ADB and Fastboot and use it straight out of cmd :
https://developer.android.com/studio/releases/platform-tools

Rakaloah said:
Is your adb up to date? I'm using the latest version of Minimal ADB and Fastboot with bundled driver from my TA-1052, works like a charm.
Click to expand...
Click to collapse
I've got ADB drivers installed and the N8 is correctly detected as a fastboot device when in "Download mode", however I cannot flash anything, most likely because "adb devices" does not show any device (it is correctly shown when fully booted up). So I'm guessing it's a driver problem...and the problem is that I cannot install the bundled drivers, either on my Win10 (the setup.exe doesn't do anything) laptop or my old W7 laptop (error). Can anyone help ? Thanks !

webvan said:
I've got ADB drivers installed and the N8 is correctly detected as a fastboot device when in "Download mode", however I cannot flash anything, most likely because "adb devices" does not show any device (it is correctly shown when fully booted up). So I'm guessing it's a driver problem...and the problem is that I cannot install the bundled drivers, either on my Win10 (the setup.exe doesn't do anything) laptop or my old W7 laptop (error). Can anyone help ? Thanks !
Click to expand...
Click to collapse
Have a look at my post: https://forum.xda-developers.com/showpost.php?p=78074773&postcount=67

Thanks.

Fast boot <waiting for device>

I just got hold of an xz2 for a bit of development work, and am trying to unlock the bootloader (yes, it's allowed, I've checked)
I'm connected to a usb2 port (same one I use for my mi mix 3 because that doesn't like usb3 for fastboot)
ADB works perfectly, however, fastboot lists no devices, and executing a command just causes <waiting for device> to show.
I've installed the drivers supplied by sony, though, the installation reported they installed but could not start.
I've never experienced this before, so, tell me if I'm doing something wrong.

ambitiousButRubbish said:
I just got hold of an xz2 for a bit of development work, and am trying to unlock the bootloader (yes, it's allowed, I've checked)
I'm connected to a usb2 port (same one I use for my mi mix 3 because that doesn't like usb3 for fastboot)
ADB works perfectly, however, fastboot lists no devices, and executing a command just causes <waiting for device> to show.
I've installed the drivers supplied by sony, though, the installation reported they installed but could not start.
I've never experienced this before, so, tell me if I'm doing something wrong.
Click to expand...
Click to collapse
Does it work with
Different cable
Different port
Different pc
Different OS like linux
?
If I remember correctly I had issues with windows drivers.

Tried different ports, same issue, not tried a different cable, but I know this cable works as I use it for fastboot on my mi mix 3.
I'll try Linux though, a few posts seem to say it works

ambitiousButRubbish said:
Tried different ports, same issue, not tried a different cable, but I know this cable works as I use it for fastboot on my mi mix 3.
I'll try Linux though, a few posts seem to say it works
Click to expand...
Click to collapse
I use Linux Mint Cinnamon for development
I am still happy with it

ambitiousButRubbish said:
I just got hold of an xz2 for a bit of development work, and am trying to unlock the bootloader (yes, it's allowed, I've checked)
I'm connected to a usb2 port (same one I use for my mi mix 3 because that doesn't like usb3 for fastboot)
ADB works perfectly, however, fastboot lists no devices, and executing a command just causes <waiting for device> to show.
I've installed the drivers supplied by sony, though, the installation reported they installed but could not start.
I've never experienced this before, so, tell me if I'm doing something wrong.
Click to expand...
Click to collapse
my same issue adb working but not fastboot on windows 10.
i solved using ubuntu on virtual machine. on windows i can't use fastboot but with ubuntu on oracle virtualbox all is work perfectly

yep, worked with linux, well, i just connected it to my mi mix 3, installed the adb/fastboot binaries in magisk and ran the commands from the terminal, looks like all my fastboot work is being done from another android device

ambitiousButRubbish said:
yep, worked with linux, well, i just connected it to my mi mix 3, installed the adb/fastboot binaries in magisk and ran the commands from the terminal, looks like all my fastboot work is being done from another android device
Click to expand...
Click to collapse
is it possible to install adb and fastboot from magisk and do it from another android device?
is it possible to do it with a 32 bit device? i have a galaxy note 4 as a second phone with snapdragon 805 32 bit

MartinX3 said:
I use Linux Mint Cinnamon for development
I am still happy with it
Click to expand...
Click to collapse
Arch linux only ?

Don't see why not, the binaries are just compiled for ARM, don't think they are architecture specific.
My mi mix 3 is ARMv8 (64 bit) sd845, and it worked fine, not sure about ARMv7, but as I say, I think the binaries are ARMv7 anyway.
So long as the device can host a USB connection it will work.

For anyone having problems with the,"Waiting for Device" in windows,
USB debugging enabled on the phone.
Connected to PC through USB data cable and Phone screen unlocked and File Transfers enabled.
In windows> Device Manager> Android device(or your device/phone) >ADB driver or similar > Properties> Driver> Update Driver > Browse Computer > Let me pick from a list of devices and Un-tick the show compatible devices and find one that works.
I've had to keep this general as there are quite a few variables with different phones makes/models but the problem is caused by Window's Device Mangler not getting the correct ADB driver installed/chosen and or too many varied ADB driver packages installed
HTH

First hit in google... so let me explain it again. (Yeah... fresh windows install ****ed me over... )
You need ADB/Fastboot.
Sony Drivers?: https://developer.sony.com/file/download/xperia-xz2-driver/
Google USB Drivers: https://developer.android.com/studio/run/win-usb
If you can't install it. Disable Driver signature enforcement (Hold Shift while you press the restart button with the mouse)
When ADB works but fastboot isn't recognized reboot into bootloader "ADB reboot bootloader" and then in Device Manager find the "Android!" device and manually select the Android Bootloader as driver.