I bought OnePlus 3T and it turned to be the Chinese version (A3010). Can the Chinese version have OxygenOS installed by default?
Yes. You can install the oxygen os.
c_86 said:
Yes. You can install the oxygen os.
Click to expand...
Click to collapse
I didn't mean whether you can install OxygenOS or not. I meant whether the Chinese version may have OxygenOS installed by default or not.
Chinese version should have H2OS by default. If not, then it probably got flashed with OOS before you got it.
djseban2 said:
Chinese version should have H2OS by default. If not, then it probably got flashed with OOS before you got it.
Click to expand...
Click to collapse
I'm planning to buy A3003 as it's compatible with my region but it's not available in 128g now, so buying A3010 would be the same after installing OOS?
Sent from my SM-G935F using Tapatalk
I also have Chinese version, it has oxygen os by default
El Maestro said:
I'm planning to buy A3003 as it's compatible with my region but it's not available in 128g now, so buying A3010 would be the same after installing OOS?
Click to expand...
Click to collapse
Yes. Just check the frequency bands
ryan49er said:
I also have Chinese version, it has oxygen os by default
Click to expand...
Click to collapse
Are you sure it is new? I fear now that the device was opened before I received it.
Was wrapped in plastic, updated when I turned it on. Seemed like most new phones I get. Been exceptional so far.
El Maestro said:
I'm planning to buy A3003 as it's compatible with my region but it's not available in 128g now, so buying A3010 would be the same after installing OOS?
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
I guess yeah. I got A3010, also with stock OOS 3.5.3 and haven't came across any problems so far. Maybe A3010s which are sent to Europe are flashed with OOS by OnePlus itself. Anyway, I read in some thread, that there is a hidden menu in which you can change frequencies.
Ali_Mahmoud said:
Are you sure it is new? I fear now that the device was opened before I received it.
Click to expand...
Click to collapse
As long as it doesn't have any scratches, I think you will be fine, hehe xd
Mine was covered too. Now, I am sure it is new. Thank you.
PS: Yeah, It is an exceptional phone
I got A3000, I'm life in Indonesian... and LTE network not support in my region ?
whahaha...
ryan49er said:
I also have Chinese version, it has oxygen os by default
Click to expand...
Click to collapse
I got to find the article but I believe one plus wants to make one OS and get rid of h2o
OnePlus 3T A3010
I recently ordered oneplus 3T from china and it says China A3010. I live in Australia will that phone have any issue regarding australian carrier frequency?
Ali_Mahmoud said:
I bought OnePlus 3T and it turned to be the Chinese version (A3010). Can the Chinese version have OxygenOS installed by default?
Click to expand...
Click to collapse
Mine is also A3010 but I already installed the latest oxygen os 4.0.2 Android Nougat
Guys and Gals, got a question, are anyone of you using the A3010 her in the US under T-Mobile? If ever, hows the LTE signal? Planning on getting one in Amazon. Thanks
djseban2 said:
I read in some thread, that there is a hidden menu in which you can change frequencies.
Click to expand...
Click to collapse
Hi djseban2, where have you found this info? It would be great if is true! Please share it Thanks, ciao
cisky78 said:
Hi djseban2, where have you found this info? It would be great if is true! Please share it Thanks, ciao
Click to expand...
Click to collapse
That's only for disabling bands (or enabling those which you have disabled before), not enabling bands not certified for your phone/region. Soft-band-switching so to speak.
Related
Hi, I was hoping to update to 6.0 but there are three versions of 6.0 to choose from. Can someone describe their differences? I bought the phone unlocked and i am using it on Verizon. I would like to keep it unlocked for all carriers and for use globally though, if that makes a difference in version number.
Raymondlikesroot said:
Hi, I was hoping to update to 6.0 but there are three versions of 6.0 to choose from......
Click to expand...
Click to collapse
Take the last one.
NLBeev said:
Take the last one.
Click to expand...
Click to collapse
what's the difference between MRA58R, which you recommended, and the others?
It's the newest update. Enough said! ?
Sent from my Nexus 6 using Tapatalk
Where I live there's both for sale. Is there a difference when it comes to custom Roms? Are they both compatible with the same ROMS and kernels
Sent from my MI 5 using Tapatalk
iXanza said:
Where I live there's both for sale. Is there a difference when it comes to custom Roms? Are they both compatible with the same ROMS and kernels
Sent from my MI 5 using Tapatalk
Click to expand...
Click to collapse
The difference is in the lte bands. Better look, what bands you need in your country.
In term of custom roms, both are same.
Ribery771 said:
Yep, The difference is in the lte bands. Better look, what bands you need in your country.
Click to expand...
Click to collapse
That's it? Both version supports my bands
Sent from my MI 5 using Tapatalk
iXanza said:
That's it? Both version supports my bands
Sent from my MI 5 using Tapatalk
Click to expand...
Click to collapse
Thats it. They are completly the same, they just use different bands.
Ribery771 said:
The difference is in the lte bands. Better look, what bands you need in your country.
In term of custom roms, both are same.
Click to expand...
Click to collapse
Can you flash the china version(a3010) with the rom that exists in the all thread in this forum? Does it fit in?
nrprtama said:
Can you flash the china version(a3010) with the rom that exists in the all thread in this forum? Does it fit in?
Click to expand...
Click to collapse
Yes, i have a China variant of the 3T, came with Hydrogen OS but i flashed Oxygen OS over it, dont need any alterations in the recovery or any other special permissions, just follow this instructions:
http://downloads.oneplus.net/oneplus-3t/oneplus_3t_oxygenos_3.5.4/
What's the easiest way to check the band on a phone? I think I've got a Chinese phone instead of EMEA
iXanza said:
Where I live there's both for sale. Is there a difference when it comes to custom Roms? Are they both compatible with the same ROMS and kernels
Sent from my MI 5 using Tapatalk
Click to expand...
Click to collapse
As a Chinese, I can clearly inform you that there is no difference between the China version and the international version.
You can flash HydrogenOS or OxygenOS anytime。
作为一名天朝本土人士，鄙人可以妥妥的告诉楼主，国际版和中国大陆版无差异可以互刷氢和氧ROM，第三方定制的ROM也是通刷的，随你喜欢想刷哪个就刷哪个。
Is it possible to reflash to get north Americans bands?
I have two op3, one I ordered directly from op+ the other from Amazon.. I'm in Canada. The first place one works fine, the other doesn't with working Sim.. I noticed the one that doesn't work has Chinese writing after the English on the back label..
Long story short, is it possible to change the software of flash the Chinese one so I get it to work?
Dreamaz said:
I have two op3, one I ordered directly from op+ the other from Amazon.. I'm in Canada. The first place one works fine, the other doesn't with working Sim.. I noticed the one that doesn't work has Chinese writing after the English on the back label..
Long story short, is it possible to change the software of flash the Chinese one so I get it to work?
Click to expand...
Click to collapse
Hardware is different between US, EU and China, you can however run HydrogenOS and OxygenOS on all variants but it won't change the modem channel support as it's hardware restricted.
Dreamaz said:
I have two op3, one I ordered directly from op+ the other from Amazon.. I'm in Canada. The first place one works fine, the other doesn't with working Sim.. I noticed the one that doesn't work has Chinese writing after the English on the back label..
Long story short, is it possible to change the software of flash the Chinese one so I get it to work?
Click to expand...
Click to collapse
pitrus- said:
Hardware is different between US, EU and China, you can however run HydrogenOS and OxygenOS on all variants but it won't change the modem channel support as it's hardware restricted.
Click to expand...
Click to collapse
Does this mean the guides to unlocking additional bands here on xda won't work? I was reading up on these. I believe It's UMTS BAND 4 I'm missing. Is there any way I can run a command or query the device somehow to compare the difference between my working op3 and the defunct one?
https://forum.xda-developers.com/oneplus-one/general/guide-unlock-aditional-bands-qualcomm-t2877031
https://forum.xda-developers.com/oneplus-3/how-to/guide-unlock-additional-lte-bands-t3519563
Does anyone know if OnePlus 3T (A3010) Chinese Version works with Canadian frequencies? I am looking specifically for Windmobile.
feimummy said:
As a Chinese, I can clearly inform you that there is no difference between the China version and the international version.
You can flash HydrogenOS or OxygenOS anytime。
作为一名天朝本土人士，鄙人可以妥妥的告诉楼主，国际版和中国大陆版无差异可以互刷氢和氧ROM，第三方定制的ROM也是通刷的，随你喜欢想刷哪个就刷哪个。
Click to expand...
Click to collapse
So the new Flyme 6 A3010 version will work on my A3003 OP3T?
Hi guys, I would like to know if the One Plus 3T chinese version has exactly the same software of the international one with all languages and google apps.
Thanks for the reply
No, the Chinese version has a different OS called hydrogen OS and doesn't come with Google Apps as it's not allowed in China.. However, if you get the Chinese version, you can easily flash the international Oxygen OS without any issues
Is the hardware of / in the OnePlus 3T (A3010) the exact same as the international version apart from the different network bands?
burnsyboo said:
Is the hardware of / in the OnePlus 3T (A3010) the exact same as the international version apart from the different network bands?
Click to expand...
Click to collapse
Yes it's exactly the same hardware. You can sideload OOS 3.5.3 from OnePlus and it will be just like A3003 and A3000, minus the network bands of course.
r.spanish said:
Yes it's exactly the same hardware. You can sideload OOS 3.5.3 from OnePlus and it will be just like A3003 and A3000, minus the network bands of course.
Click to expand...
Click to collapse
Thanks for the reply.
Was wondering since I have purchased the A3010 variant, hopefully I'm guessing we will be able to do what dev's were able to do on the OnePlus three and unlock the network bands eventually.
Can anyone confirm the bands in A3003 and A3010 ?
I've purchased the A3010 Chinese version and currently with Vodafone in AU.
Vodafone's frequency bands are:
2G/GSM: 900MHz
3G/UMTS: 2100MHz(B1), 900MHz(B8), 850MHz(B5)
4G/LTE: 1800MHz(B3),850Mhz(B5)
Am i totally covered?
A3010 Chinese version
2g：gsm 850/900/1800/1900
3g：cdma evdo bc0
3g：wcdma b1/2/5/8
3g：td-scdma b34/39
4g：td-lte b38/39/40/41
4g：fdd-lte b1/3/5/7/8
Network Coverage
You can do a quick check here :
willmyphonework #net
sorry URLs are blocked ...but you can make out...
sLy` said:
Can anyone confirm the bands in A3003 and A3010 ?
I've purchased the A3010 Chinese version and currently with Vodafone in AU.
Vodafone's frequency bands are:
2G/GSM: 900MHz
3G/UMTS: 2100MHz(B1), 900MHz(B8), 850MHz(B5)
4G/LTE: 1800MHz(B3),850Mhz(B5)
Am i totally covered?
Click to expand...
Click to collapse
I'm currently have OOS 3.5.4 running on chinese version oneplus 3t (a3010). I need this version of phone to properly run on my country network. So far no problem.
I would like to flash the international OOS rom to my Chinese OnePlus 3T. Could you please point me to the right place for the step by step instruction?
Many thanks for your help.
hknick said:
I would like to flash the international OOS rom to my Chinese OnePlus 3T. Could you please point me to the right place for the step by step instruction?
Many thanks for your help.
Click to expand...
Click to collapse
I'm running the latest update 3.5.4 on my A3010 3T. The original firmware I flashed was (3.5.3) OnePlus3TOxygen_28_OTA_027_all_161122 which you can find by searching google for the zip. I just sideloaded it so no root is required. Got the OTA to the latest version (3.5.4) and everything has been working well. No battery or signal problems after the update either. Phone is a beast, benchmarks are also pretty impressive
logansrun24 said:
I'm running the latest update 3.5.4 on my A3010 3T. The original firmware I flashed was (3.5.3) OnePlus3TOxygen_28_OTA_027_all_161122 which you can find by searching google for the zip. I just sideloaded it so no root is required. Got the OTA to the latest version (3.5.4) and everything has been working well. No battery or signal problems after the update either. Phone is a beast, benchmarks are also pretty impressive
Click to expand...
Click to collapse
Thank you, do you have any step by step instruction on how to sideload the firmware to the phone? I am new to this.
Thanks in advance
hknick said:
Thank you, do you have any step by step instruction on how to sideload the firmware to the phone? I am new to this.
Thanks in advance
Click to expand...
Click to collapse
There are two ways. You can sideload it from recovery which is what I did in the end or it looks like it's possible just from the update menu too. Here is the original thread I wrote about it. https://forum.xda-developers.com/oneplus-3t/help/hydrogen-os-2-5-1-to-oxygen-os-3-5-t3510511
And as it says basically do the same as here but with OOS
https://forum.xda-developers.com/oneplus-3t/how-to/rom-h2os-2-5-oneplus-3t-released-t3511443
As long as you flash the full ROM (it should be around 1.4gb) you should be fine.
Wow.... that looks rather simple. Thank you for your help.
r.spanish said:
Yes it's exactly the same hardware. You can sideload OOS 3.5.3 from OnePlus and it will be just like A3003 and A3000, minus the network bands of course.
Click to expand...
Click to collapse
NO. Different hardware, as someone pointed out already. Different LTE bands.
Trey333 said:
NO. Different hardware, as someone pointed out already. Different LTE bands.
Click to expand...
Click to collapse
Umm I never said they had the same LTE bands.
r.spanish said:
Umm I never said they had the same LTE bands.
Click to expand...
Click to collapse
That's hardware, though. The chipsets are a little bit different, enough for someone to notice slower connection speeds.
Trey333 said:
That's hardware, though. The chipsets are a little bit different, enough for someone to notice slower connection speeds.
Click to expand...
Click to collapse
The person I quoted was asking if there was any other difference hardware wise apart from the network support, I even mentioned that at the end of my post. I have the A3010 I know what the difference is.
sLy` said:
Can anyone confirm the bands in A3003 and A3010 ?
I've purchased the A3010 Chinese version and currently with Vodafone in AU.
Vodafone's frequency bands are:
2G/GSM: 900MHz
3G/UMTS: 2100MHz(B1), 900MHz(B8), 850MHz(B5)
4G/LTE: 1800MHz(B3),850Mhz(B5)
Am i totally covered?
Click to expand...
Click to collapse
is 4G fully support in A3010 version??
Tanvir Rahman said:
is 4G fully support in A3010 version??
Click to expand...
Click to collapse
you can check on willmyphonework. as far as i remember a3003 and a3010 have the same bands and a3000(north america model) have different bands.
Hey there is any update for global version? Im on build nx629J_encommom_V2.07..someone have newer version of global rom?
No updates yet. But bug reports have been sent to Nubia's engineering team.
Just received an 180 MB update..
Nightpwish said:
Just received an 180 MB update..
Click to expand...
Click to collapse
Global ? Or cn
Global, NX629J_EnCommon_V2.09
Security patch May 2019 and a lot of improvements, most notably camera improvements.
I must say I'm impressed..
Nightpwish said:
Global, NX629J_EnCommon_V2.09
Security patch May 2019 and a lot of improvements, most notably camera improvements.
I must say I'm impressed..
Click to expand...
Click to collapse
Do you happen to be on the European global or the NA global? Your version number suggests European.
I have not received anything yet for NA.
I'm on EU Global
Can anyone share the update zip file
Unfortunately, I'm not able to find it.
I assume it was deleted the moment I updated the phone
Hmm i received no Update, but good too see they are working
@Nightpwish,any specific language or region settings?
I'm in Belgium and didn't get the update so far...
@roadworker English language, Region UK. Nothing else
danielad200 said:
Hey there is any update for global version? Im on build nx629J_encommom_V2.07..someone have newer version of global rom?
Click to expand...
Click to collapse
Did you solved the problem? I waited your news
sakilxda said:
Did you solved the problem? I waited your news
Click to expand...
Click to collapse
Yeah thank you bro:good:
danielad200 said:
Yeah thank you bro:good:
Click to expand...
Click to collapse
Is better late than never
I got an update yesterday in Australia.
Global, NX629J_EnCommon_V2.09
lettucegoatee said:
I got an update yesterday in Australia.
Global, NX629J_EnCommon_V2.09
Click to expand...
Click to collapse
My Red Magic 3 arrived yesterday, must say very speedy delivery, 3 days only DHL express to Australia which was excellent.
I'm having trouble identifying the different models though, I've seen reference to a Chinese (CN), Global, EU but also a 'NA' version? Not sure if some are the same thing? I'm concerned as though from what I can tell the EU version doesn't have LTE Band 28 (which I want) but the NA version does and I'm not sure what I have other than it was branded NX629J.
https://global.redmagic.gg/pages/red-magic-3-specs (under 'Connectivity')
Can anyone assist please?
lettucegoatee said:
I got an update yesterday in Australia.
Global, NX629J_EnCommon_V2.09
Click to expand...
Click to collapse
Hi,
Me too but could not apply it.
Probably because I have unlocked bootloader and rooted recovery.
Regards.
NexusPenguin said:
Hi,
Me too but could not apply it.
Probably because I have unlocked bootloader and rooted recovery.
Regards.
Click to expand...
Click to collapse
Sure you can open Magisk uninstall it, it will restore stock boot.img and walla.
SuperDroidMe said:
Sure you can open Magisk uninstall it, it will restore stock boot.img and walla.
Click to expand...
Click to collapse
Hi,
What good is that update ?
Does it bring one of the following features :
- working dark mode ?
- control of front LED ?
- Always On Display ?
- App lock in Recents ?
If none of the features is included, no point in updating.
I don't think I've seen any of these mentioned in the update log, but who knows...
Regards.
Hi guys so is there any info when can we expect to get android 10 in Europe?
I've tried googling, but all i get are results for beta versions of Indian phones.
I've bought phone yesterday, am impressed so far, but notification bar is a mess and Always on display is so useless and basic that i don't use it.
March 2020
Enviado do meu RMX1931 através do Tapatalk
CROrION said:
Hi guys so is there any info when can we expect to get android 10 in Europe?
I've tried googling, but all i get are results for beta versions of Indian phones.
I've bought phone yesterday, am impressed so far, but notification bar is a mess and Always on display is so useless and basic that i don't use it.
Click to expand...
Click to collapse
It's coming in March. The Realms Europe brand is weak AF and their software support page is still two updates behind.id keep an eye on Realme India support page as software is the same as Europe:
Though they are still pushing out latest OTAs in Europe.
By the way you can't get on beta as it is closed
https://www.realme.com/in/support/software-update
manus31 said:
It's coming in March. The Realms Europe brand is weak AF and their software support page is still two updates behind.id keep an eye on Realme India support page as software is the same as Europe:
Though they are still pushing out latest OTAs in Europe.
By the way you can't get on beta as it is closed
https://www.realme.com/in/support/software-update
Click to expand...
Click to collapse
So i can simply flash indian version over my current one with method explained on provided site?
CROrION said:
So i can simply flash indian version over my current one with method explained on provided site?
Click to expand...
Click to collapse
Yep.What version you on.You should have already got OTA to the .08 update by now,even in Europe,
But yea,easiest way to flash it is just by downloading the ROM and using the stock file manager app and just selecting it
manus31 said:
Yep.What version you on.You should have already got OTA to the .08 update by now,even in Europe,
But yea,easiest way to flash it is just by downloading the ROM and using the stock file manager app and just selecting it
Click to expand...
Click to collapse
Yap .08 here
[/COLOR]
CROrION said:
So i can simply flash indian version over my current one with method explained on provided site?
Click to expand...
Click to collapse
Hey buddy did you flash the indian version ? did you get Android 10?
seccakrown said:
[/COLOR]
Hey buddy did you flash the indian version ? did you get Android 10?
Click to expand...
Click to collapse
No its not android 10.
CROrION said:
So i can simply flash indian version over my current one with method explained on provided site?
Click to expand...
Click to collapse
https://www.realme.com/uk/support/software-update
they updated there site to UK instead of EU they are updated now.
Didn't even know there was a UK section... I've been checking EU.
CROrION said:
So i can simply flash indian version over my current one with method explained on provided site?
Click to expand...
Click to collapse
ngagephone said:
Didn't even know there was a UK section... I've been checking EU.
Click to expand...
Click to collapse
they announced it on their twitter.