P9 stuck in bootloop, can only enter fastboot.
have had a good hunt to other threads and tried various methods.
Was running L09C432B182, on fastboot is shows PHONE Locked and FRP Locked.
Have tried various tools and adb to flash system.img from extracted B182 full rom but adb returns FAILED <remote: command not allowed>
I have bootloader unlock code but it returns same error when attempting to unlock bootloader.
Am I missing something that could help?
Thanks in advance
UPDATE: DC Phoenix used to restore Recovery which allowed to me flash UPADTE.APP via dload
Issue sorted
You will not be able to unlock Bootloader because you should have enabled the oem unlock option on the system. I assume you're out of system, so you have two options.
1 Try to pass the firmware using the Huawei updater software by the Hajuuk member.
2 Force update DLOAD mode (will only work if your device is entering e recovery)
And the last way is by getting $ 15 credits and doing the unbrick by DC Unlocker. (works if your device can enter fastboot mode)
ChaseRxx said:
You will not be able to unlock Bootloader because you should have enabled the oem unlock option on the system. I assume you're out of system, so you have two options.
1 Try to pass the firmware using the Huawei updater software by the Hajuuk member.
2 Force update DLOAD mode (will only work if your device is entering e recovery)
And the last way is by getting $ 15 credits and doing the unbrick by DC Unlocker. (works if your device can enter fastboot mode)
Click to expand...
Click to collapse
My DC Unlocker does not have an option for unbrick?
UPDATE: Seems it is DC Phoenix so will have a look at this and update
Agent #108053 said:
My DC Unlocker does not have an option for unbrick?
UPDATE: Seems it is DC Phoenix so will have a look at this and update
Click to expand...
Click to collapse
Yes. DC Phoenix a module of DC unlocker main software.
It will cost you 15 credits. And you be able to unbrick your device.
ChaseRxx said:
Yes. DC Phoenix a module of DC unlocker main software.
It will cost you 15 credits. And you be able to unbrick your device.
Click to expand...
Click to collapse
Thank You DC Phoenix failed to complete the process but did manage to add in recovery so was able to dload B182 horribly i have all the horrible icons.
Agent #108053 said:
Thank You DC Phoenix failed to complete the process but did manage to add in recovery so was able to dload B182 horribly i have all the horrible icons.
Click to expand...
Click to collapse
I have the same problem as yours. My phone is totally dead. But I can't buy a DC unlocker account. Can you share the account with me? Please, I really need your help.
Accounts don't work that way, credits are needed per use.
Sent from my EVA-L09 using Tapatalk
ledinhbac said:
I have the same problem as yours. My phone is totally dead. But I can't buy a DC unlocker account. Can you share the account with me? Please, I really need your help.
Click to expand...
Click to collapse
Your problem is only resolved by DC Phoenix.
You need 15 credits to use the unbrick service.
I recover 2 P9 yesterday... Dead Boot with frp and bootloader locked.
ChaseRxx said:
Your problem is only resolved by DC Phoenix.
You need 15 credits to use the unbrick service.
I recover 2 P9 yesterday... Dead Boot with frp and bootloader locked.
Click to expand...
Click to collapse
I recovered my P9 yesterday (using DC-Phoneix) but FRP is still lock. I can unlock bootloader but I can't get FRP unlock, even flash something like TWRP or root. (Error: Command not allowed)I can't use dload method to upgrade or downgrade. There's always an error at 5% ( The update package does not exist) although I copy dload folder into internal storage (and SD card too)
What should I do?
Whatever you do, do not unbrick with DC Phoenix using the Method 2. I done the Method 2, I was able to unbrick it but I don't get any network after it deleted some partitions which weren't in the factory image.
Luckily, I used the first method and everything is fine except FRP lock.
ledinhbac said:
Luckily, I used the first method and everything is fine except FRP lock.
Click to expand...
Click to collapse
That's good.
To unlock FRP. Go to Developer menu and Enable OEM Unlock.
I already pressed OEM unlock in developer option but no success to unlock FRP. I tried some methods but no luck.
ledinhbac said:
I already pressed OEM unlock in developer option but no success to unlock FRP. I tried some methods but no luck.
Click to expand...
Click to collapse
Remove any unlock pins and finger print locks.
After factory reset, the phone turned on. I only turned on OEM unlock and USB debug, then boot into fastboot mode. FRP is still LOCK.
I tried to flash something like TWRP but Error: Command not allowed.
Related
Think I did the title pretty well, I can only access fastboot (Before you say anything I've already tried this guide:http://forum.xda-developers.com/hua...ow-to-unbrick-huawei-p8-failed-t3260704/page1) all it gets me is the screen to light up (black) that's it. At this point I have no clue how to bring it back, any useful tips or ideas would always be appreciated. Thanks.
EDIT: It would be helpful if anyone knew a way to unlock the bootloader through fastboot
EDIT: nvm unlocked the bootloader through adb
EDIT:Installed TWRP through FASTBOOT
EDIT: Had the future rom downloaded, installed through SD card. DEVICE BOOTS.
EDIT: Tried dload method, went back to square 1 (Device would only backlit screen on boot, bootloader locked) Repeated steps and used the Huawei P9 Updater 2.0 by Hajuuk (Godbless) IT WORKS. Currently on C185B170 will update to B180 and from there to Android N. IF anyone has a similar problem feel free to ask.
kyle_2103 said:
Think I did the title pretty well, I can only access fastboot (Before you say anything I've already tried this guide:http://forum.xda-developers.com/hua...ow-to-unbrick-huawei-p8-failed-t3260704/page1) all it gets me is the screen to light up (black) that's it. At this point I have no clue how to bring it back, any useful tips or ideas would always be appreciated. Thanks.
EDIT: It would be helpful if anyone knew a way to unlock the bootloader through fastboot
EDIT: nvm unlocked the bootloader through adb
EDIT:Installed TWRP through FASTBOOT
EDIT: Had the future rom downloaded, installed through SD card. DEVICE BOOTS.
EDIT: Tried dload method, went back to square 1 (Device would only backlit screen on boot, bootloader locked) Repeated steps and used the Huawei P9 Updater 2.0 by Hajuuk (Godbless) IT WORKS. Currently on C185B170 will update to B180 and from there to Android N. IF anyone has a similar problem feel free to ask.
Click to expand...
Click to collapse
Hi, I have problem. I have two Huawei P9. One is L19 and the other is L09.
My L19 is the C900
My L09 I do not remember what it is ... the problem is that it is no system, it only turns on fastboot recovery mode. I've tried combo keys with dload but it does not work or does not recognize. By Hisuite says that the model is not supported. Finally I tried the Firmware Update program by hajuuk https://forum.xda-developers.com/p9-...dater-t3435878 I used several firmwares inside the L09 option but in the middle of the installation it gives error.
I need to find a way to enable the OEM so I can flash boot.img, recovery.img and system.img because I can not flash anything at the momento because it gives the Not Allowed command.
The status is Bootloader locked and FRP locked.
I do not know what to do, I have no ideas.
ChaseRxx said:
Hi, I have problem. I have two Huawei P9. One is L19 and the other is L09.
My L19 is the C900
My L09 I do not remember what it is ... the problem is that it is no system, it only turns on fastboot recovery mode. I've tried combo keys with dload but it does not work or does not recognize. By Hisuite says that the model is not supported. Finally I tried the Firmware Update program by hajuuk https://forum.xda-developers.com/p9-...dater-t3435878 I used several firmwares inside the L09 option but in the middle of the installation it gives error.
I need to find a way to enable the OEM so I can flash boot.img, recovery.img and system.img because I can not flash anything at the momento because it gives the Not Allowed command.
The status is Bootloader locked and FRP locked.
I do not know what to do, I have no ideas.
Click to expand...
Click to collapse
I think there is not solution for this problem. We have to wait. (I have the same problem but in Al00 running Al19 rom)
How do you check for FRP lock on a Huawei phone just curious.
ChaseRxx said:
Hi, I have problem. I have two Huawei P9. One is L19 and the other is L09.
My L19 is the C900
My L09 I do not remember what it is ... the problem is that it is no system, it only turns on fastboot recovery mode. I've tried combo keys with dload but it does not work or does not recognize. By Hisuite says that the model is not supported. Finally I tried the Firmware Update program by hajuuk https://forum.xda-developers.com/p9-...dater-t3435878 I used several firmwares inside the L09 option but in the middle of the installation it gives error.
I need to find a way to enable the OEM so I can flash boot.img, recovery.img and system.img because I can not flash anything at the momento because it gives the Not Allowed command.
The status is Bootloader locked and FRP locked.
I do not know what to do, I have no ideas.
Click to expand...
Click to collapse
Okay to unlock the bootloader, go into fastboot and plug in the USB to your computer, then by either using SRK tool or adb you need to flash this command: fastboot oem unlock (insert bootloader code) *don't put brackets* if you are unaware of your bootloader code then I cannot help you, however if you do know it, then once you unlocked the bootloader flash system.img and stuff to see if that works for you
kyle_2103 said:
Okay to unlock the bootloader, go into fastboot and plug in the USB to your computer, then by either using SRK tool or adb you need to flash this command: fastboot oem unlock (insert bootloader code) *don't put brackets* if you are unaware of your bootloader code then I cannot help you, however if you do know it, then once you unlocked the bootloader flash system.img and stuff to see if that works for you
Click to expand...
Click to collapse
Already tried this, I have the unlocking password but can't unlock BL through fastboot oem unlock (code) because the OEM Unlock is disabled.
ChaseRxx said:
Already tried this, I have the unlocking password but can't unlock BL through fastboot oem unlock (code) because the OEM Unlock is disabled.
Click to expand...
Click to collapse
That's weird, OEM unlcok was also switched off in developer options for me, yet this still worked, can you tell me exactly what the error code says?
kyle_2103 said:
That's weird, OEM unlcok was also switched off in developer options for me, yet this still worked, can you tell me exactly what the error code says?
Click to expand...
Click to collapse
I've tried some command in fastboot mode but there's always an error: Remote: command not allowed.
I can't do anything with fastboot mode
1. Try to force update with Power Button + Min Vol Button + Max Vol Button, liked you said this isn't working try to do the button combination with the phone connect it to the PC; in my case some times dload din't works after I connected the phone to the computer.
2. Other thing, something happend if you turn of the phone and leave Max Vol Button pressed, you should be entering to eRecovery.
3. Remember that sometimes enter in eRecovery mode requires to the phone be turn off otherwise you can't access to Recovery. So if this is the case follow bullet #2 and them #1.
PD: OFC I'm assuming you already have the dload folder with an compatible version of stock ROM on your SDCARD. If you don't have any version tries this one: https://forum.xda-developers.com/p9...dload-file-p9-eva-l09-b136-t3382818?nocache=1
Hope I helped you, I already bricked twice my P9 corrupting System Table Partitions.
Jeremy Molina.
---------- Post added at 10:38 AM ---------- Previous post was at 10:36 AM ----------
kyle_2103 said:
That's weird, OEM unlcok was also switched off in developer options for me, yet this still worked, can you tell me exactly what the error code says?
Click to expand...
Click to collapse
If you did the change of Unlock OEM before the bricked in an previous authorized computer you will still have rights for, otherwise new Android Security features is going to rejected the request.
Exacly
Dload/ no network
ChaseRxx said:
Exacly
Click to expand...
Click to collapse
Hi guys! Im new sorry if posted in wrong place/topic, I did dload method as here https://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818 to debrand my L09 Vodafone to stock software and now I end up in EVA-C900B136 and my sim card/network is not working anymmore I had download the software package is in the above post and did force flash.
Many thanks for help!!!
kyle_2103 said:
Think I did the title pretty well, I can only access fastboot (Before you say anything I've already tried this guide:http://forum.xda-developers.com/hua...ow-to-unbrick-huawei-p8-failed-t3260704/page1) all it gets me is the screen to light up (black) that's it. At this point I have no clue how to bring it back, any useful tips or ideas would always be appreciated. Thanks.
EDIT: It would be helpful if anyone knew a way to unlock the bootloader through fastboot
EDIT: nvm unlocked the bootloader through adb
EDIT:Installed TWRP through FASTBOOT
EDIT: Had the future rom downloaded, installed through SD card. DEVICE BOOTS.
EDIT: Tried dload method, went back to square 1 (Device would only backlit screen on boot, bootloader locked) Repeated steps and used the Huawei P9 Updater 2.0 by Hajuuk (Godbless) IT WORKS. Currently on C185B170 will update to B180 and from there to Android N. IF anyone has a similar problem feel free to ask.
Click to expand...
Click to collapse
How did you unlock the bootloader through adb ? I'm in the same position as you put I have a P9lite.
dondrog said:
How did you unlock the bootloader through adb ? I'm in the same position as you put I have a P9lite.
Click to expand...
Click to collapse
fastboot oem unlock (followed by bootloader code)
kyle_2103 said:
fastboot oem unlock (followed by bootloader code)
Click to expand...
Click to collapse
Hello gays i install nougat 7
install with TWRP after install my phone is no keybord no all problems and i can`t active oem waht i do all command
remote not allowed coomand and i try to install all veriosn but still problem please help me
i install
EVA-L19C432B322-update
and my phone 6369C-EVA L19
my mistake please help me
i try to swoftware sim but swoftware failed
--
incompatibility with current version please download the correct update package
i upload vedio on youtube see please https://www.youtube.com/watch?v=V2yH...ature=youtu.be
sry for my bad engilsh
Any help would be greatly appreciated
I have a P9 L09, i have unlocked the bootloader, flashed TWRP recovery, and started flashing some roms. I have succesfully flashed a cyanogenmod, and it booted properly, but when it started it asked me for a password which i did not know, so i google searched and found out that it is a common issue and i need to wipe data from recovery. I tryed that but it did not work it says failed, and nothing works in the wipe advanced section, beside system. And also in the custom recovery it says that the internal storage has 0MB ! I was able to put other custom roms on the SDcard and flash them, they booted but every single one asks for the password.. I then tryed to install stock rom with the dload method, but it crashes and 40% , and i tryied the System Recovery option in HiSuite and it says it is not compatible with my device. Any help would be greatly appreciated! Thank you!
kyle_2103 said:
fastboot oem unlock (followed by bootloader code)
Click to expand...
Click to collapse
Hello. I have the same problem. I have my unlock code but in fastboot, adb command says it failed. Sorry for bad english. What can i do?
FAILED: REMOTE COMMAND NOT ALLOWED FINISHED.
Same problem on my honor &x locked bootloader and bricked. unlocking the oem like you said above does not work
Guys I am completely unbricked my phone EVA L19. I cant enter erecovery or flash something that adb says command not allowed. I can just enter fastboot mode. adb says my bootloader unlocked and fastboot says it is relocked, always stuck at huawei logo. Can you help me to do something to save my phone without sending warranty service? I almost tried all unbrick guides and result is nothing Why huawei hisuite dont support for eva L19!!
hiphoplife77 said:
Guys I am completely unbricked my phone EVA L19. I cant enter erecovery or flash something that adb says command not allowed. I can just enter fastboot mode. adb says my bootloader unlocked and fastboot says it is relocked, always stuck at huawei logo. Can you help me to do something to save my phone without sending warranty service? I almost tried all unbrick guides and result is nothing Why huawei hisuite dont support for eva L19!!
Click to expand...
Click to collapse
i am currently in the exact same situation on my EVA-L09, where i can't enter system, erecovery or dload. I also can't use fastboot or adb commands.
I am currently communicating back and forth with Huawei about the situation and I recommend that you do the same. As our phones can't be fixed unless we can use an ADB command to restore erecovery,
which in turn also reinstalls Dload.
We need a bit more informations to help. What cust are your phones, when you enter fastboot menu does it say locked or unlocked. What exactly were you doing before your phone failed (nougat upgrade?).
Have you tried eva-l09c432b136 firmwares to unbrick your phones?
Can you unlock your phones again from fastboot menu, and reflash them manually with fastboot commands?
I was trying to flash stock rom what L19C185B180. But failed and stuck at huawei logo. As I said fastboot says frp locked and bootloader relocked. But when I check from adb, it says botloader unlocked. And also when I am trying some command in fastboot, it says always command not allowed. I am unable to do anything from fastboot or hisuite.
hiphoplife77 said:
I was trying to flash stock rom what L19C185B180. But failed and stuck at huawei logo. As I said fastboot says frp locked and bootloader relocked. But when I check from adb, it says botloader unlocked. And also when I am trying some command in fastboot, it says always command not allowed. I am unable to do anything from fastboot or hisuite.
Click to expand...
Click to collapse
Did you tried factory reset from stock recovery?
I cant enter recovery. Just fastboot that never allow to flash something.
hiphoplife77 said:
I cant enter recovery. Just fastboot that never allow to flash something.
Click to expand...
Click to collapse
Did you put the full firmware in sd card and tried dload method again?
As I said I can only enter to fastboot, unfortunately.
hiphoplife77 said:
As I said I can only enter to fastboot, unfortunately.
Click to expand...
Click to collapse
Did you tried to unlock the bootloader again?
How did you flashed the firmware when the phone get bricked?
gm007 said:
Did you tried to unlock the bootloader again?
How did you flashed the firmware when the phone get bricked?
Click to expand...
Click to collapse
You didnt understand. First I flashed firmware after than phone bricked.
hiphoplife77 said:
You didnt understand. First I flashed firmware after than phone bricked.
Click to expand...
Click to collapse
You flashed the firmware with dload ot twrp?
Do you still have twrp?
I tried before but couldnt. I dont have twrp or erecovery. Just fastboot.
hiphoplife77 said:
You didnt understand. First I flashed firmware after than phone bricked.
Click to expand...
Click to collapse
Unlock your bootloader again, surely you allready have the bootloader unlock code. Bootloader can relock when flashing roms. Then try fastboot flash again. Just try it. No harm if it can't be done.
I cannot unlock bootloader again because command not allowed due to frp lock. Can I unlock frp from fastboot?
Also I tried to purchase dc phoenix credit for flashing stock rom but I couldnt. Hipay payment rejected and they want confirmed paypal account for purchasing. And also I couldnt do it because paypal does not exist in turkey and so I couldnt confirm my paypal account. Anyone have dc phoenix account with 15 credits? Donate me please
hiphoplife77 said:
Also I tried to purchase dc phoenix credit for flashing stock rom but I couldnt. Hipay payment rejected and they want confirmed paypal account for purchasing. And also I couldnt do it because paypal does not exist in turkey and so I couldnt confirm my paypal account. Anyone have dc phoenix account with 15 credits? Donate me please
Click to expand...
Click to collapse
Ok, from what I understand then you're stuck at trying with factory firmware. Try eva-l19c185b166, EVA-L09c185b136. Or find a service center that can erase your frp from fastboot.
Luckily I tried to change update.app file what I downloaded from official huawei support site, format my sd card and dload method worked. I am so happy now flashed l19c185b180, updated to b220 and bootloader is locked, not relocked interestingly luck is from my side now. I wont use any file that shared unofficially again. Thank you everyone for your helpful behaviours.
hi everybody,
I need help from a big expert because I have a big problem with my P10...
ok for starter I know where is my mistake I forget to enable oem security in dev option
of course it's not my only mistake in twrp I do a advenced wipe and I wipe system sd etc...
So now my phone don't boot, twrp goe's when I flash another updape.zip with extarnal sd card and I can't flash anything with fastboot because frp it's lock...
my previous version it's l09c45b101 and I don't find full update.zip of this version just ota...
Some one can help me please
Lykeul said:
hi everybody,
I need help from a big expert because I have a big problem with my P10...
ok for starter I know where is my mistake I forget to enable oem security in dev option
of course it's not my only mistake in twrp I do a advenced wipe and I wipe system sd etc...
So now my phone don't boot, twrp goe's when I flash another updape.zip with extarnal sd card and I can't flash anything with fastboot because frp it's lock...
my previous version it's l09c45b101 and I don't find full update.zip of this version just ota...
Some one can help me please
Click to expand...
Click to collapse
It's not big problem just boot loader lock and relock again the phone is factory reset. Ok
M.KK said:
It's not big problem just boot loader lock and relock again the phone is factory reset. Ok
Click to expand...
Click to collapse
Really ? I try this know
But how relock him when frp it's lock ? Fastboot don't work
Edit: so like I say fastboot don't work ....
i had the same problem only option was to use dc phoenix so you have to pay but maybe try red lotus but it think it wont work because you dont have the option to flash stock recovery.but maybe we should give you a twrp backup of system and boot then you could boot again
crucky said:
i had the same problem only option was to use dc phoenix so you have to pay but maybe try red lotus but it think it wont work because you dont have the option to flash stock recovery.but maybe we should give you a twrp backup of system and boot then you could boot again
Click to expand...
Click to collapse
I paid 15€ on DC Phoenix for flash any update.app but don't boot.
I paid 15€ on DC unlocker for erase frp but don't work.
Unlock and relock don't work
I can't use a backup or twrp because now I have stock recovery.
What can I do ???
:crying:
check the thread to rebrand should work for you
this worked for me:
- relock the bootloader via ADB
- in Developer Option, Enable OEM unlock
- unlock the bootloader again via ADB
His P10 don't boot...
Hello, Try This Methode : https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
Hi did you fix your phone?
im having the same issue.
PhysX said:
this worked for me:
- relock the bootloader via ADB
- in Developer Option, Enable OEM unlock
- unlock the bootloader again via ADB
Click to expand...
Click to collapse
hello!
when you say "relock the bootloader via ADB you mean:
adb reboot-bootloader THEN fastboot oem lock (and the code)?
thanks.
EDIT: i was using the wrong command, it is fastboot oem relock and the code... sorry
HWOTA working and solved your problem.
just yesterday I made mine. the bootloader was open but the frp was closed.
the HWOTA has solved it nicely. now vtr-L29C432B185 firmware is up.
Unfortunately, this disadvantage is the low level format after the bootloader has been re-opened as the firmware closes.
Lykeul said:
hi everybody,
I need help from a big expert because I have a big problem with my P10...
ok for starter I know where is my mistake I forget to enable oem security in dev option
of course it's not my only mistake in twrp I do a advenced wipe and I wipe system sd etc...
So now my phone don't boot, twrp goe's when I flash another updape.zip with extarnal sd card and I can't flash anything with fastboot because frp it's lock...
my previous version it's l09c45b101 and I don't find full update.zip of this version just ota...
Some one can help me please
Click to expand...
Click to collapse
Same problem.. and you can bug it to get locked, but won't help... my problem is that I got EMUI 8 with oreo, but also B172 rom flashed at the same time. So if I unlock it but FRP is lock, the phone won't boot to install because of rom.
I have the same issue, but i can´t turn on my phone to unlock OEM.
What can i do?
I also have same problem. I got frp unlock key from Huawey support, but it doesent help to unlock frp. Without it i cant unlock bootloader. Try a lot of things, nothing help. Tommorow i will go go service...
I got answer that motherboard is demage, and repair cost more than new phone....
Tommasavas said:
I also have same problem. I got frp unlock key from Huawey support, but it doesent help to unlock frp. Without it i cant unlock bootloader. Sooo i'm in deep ass with that. Try a lot of things, nothing help. Tommorow i will go go service...
I got answer that motherboard is demage, and repair cost more than new phone....
Click to expand...
Click to collapse
u can have frp removed at https://www.gsmzambia.com
Tommasavas said:
I also have same problem. I got frp unlock key from Huawey support, but it doesent help to unlock frp. Without it i cant unlock bootloader. Try a lot of things, nothing help. Tommorow i will go go service...
I got answer that motherboard is demage, and repair cost more than new phone....
Click to expand...
Click to collapse
Sooo guys, if you have HUAWEI P10 (my phone is VTR-L29), which have FRP LOCK, BOOTLOADER LOECKEd and you HAVE access to ERECOVERY, you can safe you time and money to do this: send me a message, because i can't put outside link.... (you need Frimware Finder, Wifi router, and eRecovery)
I did everything like in this thread after visited phone service, there they told what my phone totaly dad...
Sooo, do it and BE HAPPY.
you managed to fix your cell phone?
---------- Post added at 06:46 AM ---------- Previous post was at 06:15 AM ----------
Tommasavas said:
Sooo guys, if you have HUAWEI P10 (my phone is VTR-L29), which have FRP LOCK, BOOTLOADER LOECKEd and you HAVE access to ERECOVERY, you can safe you time and money to do this: send me a message, because i can't put outside link.... (you need Frimware Finder, Wifi router, and eRecovery)
I did everything like in this thread after visited phone service, there they told what my phone totaly dad...
Sooo, do it and BE HAPPY.
Click to expand...
Click to collapse
you managed to fix your cell phone?
Did you find any solution?
I have a Huawei P10 plus (VKY-L29). Tried all methods to bypass FRP to no success.
- Talkback (V7.3 - Therefore no luck)
- Emergency dialler (*#*#6130#*#*) not picking up as well as other dial codes in emergency dial
- Erecovery (cannot find any recovery files)
- Fastboot mode (phone restarts to Welcome screen soonest booted)
- Wifi (Connect to first Wifi and then forget this network and connect again to 2nd Wifi entering some manual details on the host/proxy and then connect again to force the phone to come up with the error message in order to access help) no luck
Am I missing something? has anyone had success already regarding the Huawei P10 Plus FRP bypass????
Hi,
I have a P9 here I'm was asked to repair. I think it is kind of bricked and I hope some one can help me to unbrick it.
According to the auto dc-unlocker identification:
Found Phone : EVA-L09
Firmware : EVA-L09C432B386
FB LockState: LOCKED
USER LockState: LOCKED
So, bootloader locked and FRP locked. I don't know if the Firmware version above is right. All I know is that some Update.app files were flashed to the state of the phone now and before there where bootloops while the start animation and stuck boot with black screen.
At the moment I can do:
- turn on to see only the first huawei log with "powered by android", then nothing happens
- I can not enter eRecovery or update for Update.app
- I can only enter fastboot
I have the unlock code for the bootloader. I can not commit any fastboot commands (oem unlock, flash, etc) all is blocked with:
FAILED (remote: Command not allowed)
The locked FRP should be the reason for this.
I think OEM-unlock and usb debug from developer section was not enabled as the phone was usable. adb commands like "adb reboot bootloader" fail with
error: device '(null)' not found
fastboot devices shows the device
I have tried to uncharge the battery and then try to enter other modes than fastboot. No luck with that.
Do I have any chance to unbrick it without paying for the dc-unlocker/phoenix?
Can I do something with SRKTool?
If I have to use unlocker,
- do I have to unlock the bootloader?
- should I flash the same firmware that is now on the phone (B386) and where can I find it? (found only 1000 other versions until now)
Hope for answers
I've gone through that before, but ended up using DC-Phoenix to unbrick it when it's FRP and bootloader locked. Cost me about $15. There is a post on how to do this but I'll have to search for it again.
Here is the post I used:
https://forum.xda-developers.com/showpost.php?p=71767614&postcount=7
I guess you enter fastboot by Vol- and Power?
Not sure if the following method could help you with, but you can analyze before you go for dc-phoenix:
https://forum.xda-developers.com/showpost.php?p=74169408&postcount=7
scammander said:
Hi,
I have a P9 here I'm was asked to repair. I think it is kind of bricked and I hope some one can help me to unbrick it.
According to the auto dc-unlocker identification:
Found Phone : EVA-L09
Firmware : EVA-L09C432B386
FB LockState: LOCKED
USER LockState: LOCKED
So, bootloader locked and FRP locked. I don't know if the Firmware version above is right. All I know is that some Update.app files were flashed to the state of the phone now and before there where bootloops while the start animation and stuck boot with black screen.
At the moment I can do:
- turn on to see only the first huawei log with "powered by android", then nothing happens
- I can not enter eRecovery or update for Update.app
- I can only enter fastboot
I have the unlock code for the bootloader. I can not commit any fastboot commands (oem unlock, flash, etc) all is blocked with:
FAILED (remote: Command not allowed)
The locked FRP should be the reason for this.
I think OEM-unlock and usb debug from developer section was not enabled as the phone was usable. adb commands like "adb reboot bootloader" fail with
error: device '(null)' not found
fastboot devices shows the device
I have tried to uncharge the battery and then try to enter other modes than fastboot. No luck with that.
Do I have any chance to unbrick it without paying for the dc-unlocker/phoenix?
Can I do something with SRKTool?
If I have to use unlocker,
- do I have to unlock the bootloader?
- should I flash the same firmware that is now on the phone (B386) and where can I find it? (found only 1000 other versions until now)
Hope for answers
Click to expand...
Click to collapse
So you can not update via dload method? Did you try booting into recovery (not Recovery)? And you can't update with Update.app, you need to flash update.zip and full_update.zip via TWRP or Recovery. What wanted the owner of this phone to do, that he bricked it ?
Thank you all for your answers. Like I tried to describe: I was not able to access any other mode than fastboot.
"was able": I used DC-Phoenix now and it worked just fine.
Little confusing is that in all tutorials, even the on on the DC site, the UI of the tool is different.
But that's now Problem. The current Version is lot easier. Just "Standard Mode", select Update.app (full), Click Update.
The Phone gets flashed with fastboot, DC will restart it to update mode and will flash again. All automatic.
Really easy.
so you paid 15 USD ?
DallasCZ said:
so you paid 15 USD ?
Click to expand...
Click to collapse
Yes I did, and it worked.
I have a problem with sne-lx1. Software has been dropped. I can enter the phone only for fastboot & rescue mode. Recovery is not working and nothing else. After running, error mode pops up. The phone has no unlocked bootloader and has frp on. How can I restore the software? The commands from fastboot are not accepted.
nicekt said:
I have a problem with sne-lx1. Software has been dropped. I can enter the phone only for fastboot & rescue mode. Recovery is not working and nothing else. After running, error mode pops up. The phone has no unlocked bootloader and has frp on. How can I restore the software? The commands from fastboot are not accepted.
Click to expand...
Click to collapse
try via hisuite if recognize it
Hisuite communicates "System Restore is not supported on this device"
nicekt said:
Hisuite communicates "System Restore is not supported on this device"
Click to expand...
Click to collapse
Then stoch frimware and dload method. I think its your best shoot.
Only method for me is work with dc unlocker.
Unlock with them bootloader and frp and then install firmware via fastboot.
mata84 said:
Only method for me is work with dc unlocker.
Unlock with them bootloader and frp and then install firmware via fastboot.
Click to expand...
Click to collapse
was it very expensive?
15euros
mata84 said:
15euros
Click to expand...
Click to collapse
what is the website you used?
I go to dc u locker site and buy there