NEBULA V-1.0
Code:
Your warranty is now void.
I am not responsible for bricked devices,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this kernel
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
FEATURES
FIOPS, BFQ, CFQ, deadline, noop, SIO and zen i/o schedulers
Option to disable touchboost
Gamepad support
Performance and power optimizations
exFAT and NTFS r/w support
Option to disable fsync
Advanced color control (Red, Green, Blue, Saturation, Contrast, Value, Hue)
Sound control (full range analog & digital headphone gain)
ElementalX Governor
Despair Governor
Intelliactive Governor
Zzmove bLE Governor
Wheatley Governor
Darkness Governor
Bioshock Governor
Alucard Hotplug
Bricked Hotplug
Adaptive Low Memory Killer
Thermal Throttling
arch power
KCAL
Backlight Dimmer
Built with UBERTC & Archidroid
Other power optimizations
Installation
* Flash in recovery
For maximum compatibility with all ROMs, Nebula uses your existing ramdisk.
Do NOT flash this over other custom kernels!
You should only flash Nebula over the kernel that came with your ROM!!!
Source Code
LINK
@franciscofranco
@zeroblade1984
@savoca
@flar2
@Lord Boeffla
@TechExhibeo
XDA:DevDB Information
[KERNEL] Nebula v-1.0 [NOUGAT], Kernel for the Xiaomi Mi Max
Contributors
Rohan purohit, TechExhibeo
Source Code: https://github.com/rohanpurohit/nebula-hydrogen
Kernel Special Features:
Version Information
Status: Testing
Created 2017-01-09
Last Updated 2017-01-09
Download
NEBULA-V1
NEBULA-V2.0
Reserved
about Backlight Dimmer, does it mean that, if I flash the kernel on a rom without this option, it will add an option for setting Backlight Dimmer?
Any CPU/GPU Overclocking capabilities?
laolang_cool said:
about Backlight Dimmer, does it mean that, if I flash the kernel on a rom without this option, it will add an option for setting Backlight Dimmer?
Click to expand...
Click to collapse
Yes , like all the other features in the kernel
OrionBG said:
Any CPU/GPU Overclocking capabilities?
Click to expand...
Click to collapse
Not yet, in furture releases
Will this kernel work on cm and also Lineage based roms?
Thanks for the great work to bring a kernel to our device!!
Franssen said:
Will this kernel work on cm and also Lineage based roms?
Thanks for the great work to bring a kernel to our device!!
Click to expand...
Click to collapse
Yes will work on all Nougat Roms
Rohan purohit said:
Not yet, in furture releases
Click to expand...
Click to collapse
At least it is in the pipeline so I'll be keeping an eye on this threat!
Thank you for taking the time developing this kernel!
Rohan purohit said:
Yes will work on all Nougat Roms
Click to expand...
Click to collapse
Currently trying out this kernel on my Hydrogen running latest Lineage OS (by nigel8) with ElementalX CPU governor and alucard hotplug. Everything is working fine at the moment, will monitor battery consumption over the next few days.
Rohan purohit said:
Yes , like all the other features in the kernel
Click to expand...
Click to collapse
I flashed it on validus rom, still can't find the option to control button dim light...
laolang_cool said:
I flashed it on validus rom, still can't find the option to control button dim light...
Click to expand...
Click to collapse
install kernel aduitor .. go to " Screen" tab .. ul find "Backlight dimmer" at the end .. enable it , toggle brightness slider or wait for few seconds.. ul see
Rohan purohit said:
install kernel aduitor .. go to " Screen" tab .. ul find "Backlight dimmer" at the end .. enable it , toggle brightness slider or wait for few seconds.. ul see
Click to expand...
Click to collapse
oh, got it, thank you! I met issue with wifi, wifi got too much unstable, got diconnected many times, so I flashed back to stock rom's kernel...
Can u add undervolting?
Wysłane z mojego MI MAX przy użyciu Tapatalka
Is this for aosp or cm based naugat....will it work with miui rom...?
if you add in the future OC, this will be my kernel
martin132014 said:
Is this for aosp or cm based naugat....will it work with miui rom...?
Click to expand...
Click to collapse
yes all nougat roms, wont work with miui, i made an miui version, but wifi isnt working.. working on a fix
Rohan purohit said:
yes all nougat roms, wont work with miui, i made an miui version, but wifi isnt working.. working on a fix
Click to expand...
Click to collapse
Waiting on miui at the moment.... Thanks for the great work....
Running on it at the moment. Any particular recommended setting for daily backup?
Related
WARNING!!
This kernel allows you to set the CPU frequency beyond the stock rated frequencies. Do this at your own risk! I will not be responsible for any damage to your device if you do so!
INTRODUCTION
It seems there's a dearth of kernels for JB 4.3 AOSP-based ROM for the i9100g. So I'm deciding to share my own custom kernel for those who want some alternative to the the built-in kernels on the AOSP/CM10.2-based ROMS.
I can't think of a fancy name for this, so let's just call it aidfarh's kernel for now.
Any feedback is welcome.
FEATURES
Based on Mokee v43 kernel, which is based on CM10.2 kernel
Updated to Linux version 3.0.98
TWRP 2.6.3 recovery
USB fastcharge available (disabled by default)
Governors:
Ondemand
Hotplug
Userspace
Interactive V2 by imoseyon
InteractiveX by imoseyon
Performance
Powersave
Conservative
Lulzactive
PegasusQ
AbyssPlug
I/O schedulers:
cfq
noop
deadline
row
Dynamic management of dirty page writebacks
Some optimisations - hard float, some cache optimisations, disabled tracing
CHANGELOG
20131010:
Added 200 & 1350 MHz CPU frequencies. Overclock/underclock at your own risk!
Updated row scheduler to V4 and tweaked default settings.
Modified power.t1.so and included in kernel zip.
20131013:
Prevent omap4 duty cycle from overriding user selected cpu max_frequency.
Optimize cpufreq transition latency.
20131023:
Update to make it work with new multi-sim feature in CM-10.2.
20131113:
Updated to Linux kernel version 3.0.101.
Added SIO scheduler.
20131220:
Android 4.4 (built on Omnirom 4.4 source tree).
20131222:
Released different versions for Omnirom 4.4 and CM11.
Omnirom 4.4 version - fix max frequency behaviour (power.t1.so)
REQUIREMENTS
Android 4.3
This kernel should work with any CM10.2 based ROM. Tested on CM10.2 and Mokee
It would probably also work with non-CM AOSP 4.3 based ROM, but due to differences in implementation, some features might not work 100%.
Android 4.4
I've produced two versions of this kernel. One is compatible with Omnirom 4.4 and the other is compatible with CM11. Compatibility with other Android 4.4 roms is unknown.
INSTRUCTIONS
Flash the zip in CWM or TWRP recovery.
CREDITS
Thanks to:
codeworkx and the cyanogenmod team
Omnirom team
Ryuinferno and the Mokee team - this kernel uses the Mokee kernel as the starting point
imoseyon and leanKernel devs - some commits were cherry picked from the leanKernel source
Team Win Recovery Project Team
Google and Samsung
Linus Torvalds and all Linux developers
DOWNLOAD
Android 4.3
20131004: Download
20131010: Download
20131013: Download
20131023: Download
20131113: Download
Android 4.4
Omnirom 4.4 compatible:
20131220: Download
20131222: Download
CM11 compatible:
20131222: Download
SOURCE CODES
Kernel source code
My github (device settings etc.)
TO-DO
Add more CPU frequencies/overclock/underclock
Tweak default governor tuneables - suggestions welcome
Update ROW scheduler to V4
Further optimisations
P.S. For some reason I can't edit the first post. Is there a problem with the server? (Edit: solved by using Firefox instead of Chrome)
Showing some support here......are you editing using Tapatalk? I face that from time to time...
You forgot this: https://github.com/aidfarh/android_kernel_samsung_t1/commit/6faac1345139ea7301dd4c98d7bf200b77167a9a
And just a heads up, the last time when I tired to apply interactiveX, I faced random reboots in recovery...
Ryuinferno said:
Showing some support here......are you editing using Tapatalk? I face that from time to time...
You forgot this: https://github.com/aidfarh/android_kernel_samsung_t1/commit/6faac1345139ea7301dd4c98d7bf200b77167a9a
And just a heads up, the last time when I tired to apply interactiveX, I faced random reboots in recovery...
Click to expand...
Click to collapse
I was using Chrome. After clicking the Edit/Delete button I just got that cursor spinning on and on. Editing using Firefox was fine.
And yeah, I also had the same problem with interactiveX, but that was back during ICS days. The reason was interactiveX didn't coexist well with interactive, so my solution back then was to use only interactiveX and disable interactive. I'll do some more tests and hopefully the newer versions work well.
Whats the frequences of overclocking ? .thanks...
Στάλθηκε από το GT-I9100G μου χρησιμοποιώντας Tapatalk 2
spirosbakos said:
Whats the frequences of overclocking ? .thanks...
Στάλθηκε από το GT-I9100G μου χρησιμοποιώντας Tapatalk 2
Click to expand...
Click to collapse
No overclocking yet.
this kernel can be used on crdroid rom or not ?
peped94 said:
this kernel can be used on crdroid rom or not ?
Click to expand...
Click to collapse
If it's based on CM10.2 it should be compatible. How about you try it and see?
aidfarh said:
If it's based on CM10.2 it should be compatible. How about you try it and see?
Click to expand...
Click to collapse
okayy. but im so afraid to try it first. im worried my device will get into bootloop. and i am lazy to do a nandroid backup. haha
I tried it and it works on Avatar rom latest , thanks for this kernel
how about battery ???
i heard that the linux kernal not battery friend ??
madoooz said:
how about battery ???
i heard that the linux kernal not battery friend ??
Click to expand...
Click to collapse
==…all Android kernels are linux based...
Flashed on Cm10.1.3 so far no issue
Is there any way i can enable fast charge (default is disabled) or no way if rom dont support.
Sent from my GT-I9100G using xda premium
Just what I've been waiting for. I'm gonna test wright away. Can wait. Tnx!
Verstuurd van mijn GT-I9100G met Tapatalk
nainaabd said:
Flashed on Cm10.1.3 so far no issue
Is there any way i can enable fast charge (default is disabled) or no way if rom dont support.
Sent from my GT-I9100G using xda premium
Click to expand...
Click to collapse
so it's working on 4.2.2 too?
game4life said:
so it's working on 4.2.2 too?
Click to expand...
Click to collapse
Yes (Cm10.1.3 =4.2.2)
Sent from my GT-I9100G using xda premium
Boots good on Slim. interactivex + cfq 0 critical issues so far.
Sent from my GT-I9100G using XDA Premium 4 mobile app
Suo.Eno said:
Boots good on Slim. interactivex + cfq 0 critical issues so far.
Sent from my GT-I9100G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Is vibration intensity working on slim with this kernel?
iXanza said:
Is vibration intensity working on slim with this kernel?
Click to expand...
Click to collapse
Woopsies didn't check that on Slim bro sorry. Now flashing this to that other ROM that shall not be named if you get my whiff. Yeah can't find vibration intensity in settings here either if that helps.
nainaabd said:
Flashed on Cm10.1.3 so far no issue
Is there any way i can enable fast charge (default is disabled) or no way if rom dont support.
Sent from my GT-I9100G using xda premium
Click to expand...
Click to collapse
Use TricksterMOD...
iXanza said:
Is vibration intensity working on slim with this kernel?
Click to expand...
Click to collapse
Slim still uses old code, so until it updates, newer kernels won't have vibration control in Slim...
Rojak Kernel for Xperia Z
WARNING!!
This kernel allows you to set the CPU frequency beyond the stock rated frequencies. Do this at your own risk! I will not be responsible for any damage to your device if you do so!
INTRODUCTION
This is a kernel for Xperia Z running Omnirom. It may or may not work on other roms.
Any feedback is welcome.
FEATURES
Linux 3.4.86
Gamma control
Sweep 2 Wake
Doubletap 2 wake
USB Fastcharge
CPU overclocking up to 1836 MHz
Intelli-Plug
Additional CPU governors - intellidemand, intelliactive, preservative
Additional I/O scheduler - bfq, sio, fiops
GPU overclocked to 450 MHz
Additional GPU governor - simple
Voltage control
Sound control
Intellithermal (NEW)
REQUIREMENT
This kernel work with Omni 4.4 for Xperia Z. It's tested on Omni 4.4.4 nightly build 20141031. Please update your rom if you're using an older version.
INSTRUCTION
Make sure you're using Omnirom build 20140324 or later. Download here. Flash the zip in CWM or TWRP recovery.
NOTES
To change CPU governor or min/max cpu frequency (i.e. over/underclocking), first disable MPDecision and enable Intelliplug using an app like Fauxclock or Trickster Mod. To over/underclock, use Omnirom's performance setting. Third-party apps might not work.
To use Gamma control, see this post: http://forum.xda-developers.com/showpost.php?p=45436325&postcount=3. Credits to alnikki25k.
.
SOURCE CODE
https://github.com/aidfarh/android_kernel_sony_apq8064/tree/rojak_kk
CREDITS
This kernel is based on Omnirom kernel for yuga. Various codes were copied from kernels by DoomLord, alnikki25k, maxwen and faux123. Thanks to all other kernel developers who's contributed codes to various linux and android kernels.
XDA:DevDB Information
Rojak Kernel for Yuga, Kernel for the Sony Xperia Z
Contributors
aidfarh
Kernel Special Features:
Version Information
Status: Stable
Created 2014-03-26
Last Updated 2014-11-05
Reserved
CHANGELOG
v1 (2014-03-25)
Gamma control
Sweep 2 Wake
Doubletap 2 wake
USB Fastcharge
CPU overclocking up to 1836 MHz
Intelli-Plug
Additional CPU governors - intellidemand, intelliactive
Additional I/O scheduler - bfq
v2 (2014-03-27)
Added sio and fiops I/O schedulers
Overclock GPU to 450 MHz
Include wlan firmware in kernel zip
v3 (2014-04-12)
Added voltage control
Added preservative CPU governor
Updated GPU drivers (copied from xzaosp kernel)
Added simple GPU governor
Kernel updated to Linux 3.4.86
Compiled using Linaro 4.7-2014.01 toolchain
Various optimisations (mostly cherry-picked from xzaosp kernel by alnikki25k) (see github for details)
Added sound control (doesn't seem to work)
v4 (2014-05-05)
Added sound control v3.2
Compiled using Linaro 4.8-2014.03 toolchain
Enabled some linaro optimisations
v5 (2014-11-05)
Synced with updated omnirom kernel source code
Compiled using Christopher83's 4.9.2-2014.09 toolchain
Added intellithermal (disabled by default; enable using Trickster Mod, Fauxclock or similar app)
Updated intelliplug to ver 3.8
Modified preservative governor for extra smoothness
Also see the notes in this post: http://forum.xda-developers.com/showpost.php?p=56506979&postcount=134
Congrats on your kernel, mate! Looks good, will try this
Will this work on ROM based on Omnirom like for example Dirty Unicorn...
Sent from my C6603 using Tapatalk
Vishalkris said:
Will this work on ROM based on Omnirom like for example Dirty Unicorn...
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
I honestly don't know. Please try and provide feedback.
K will do it
Sent from my C6603 using Tapatalk
Im wondering the same thing.Tell us when you test please.
FakeSmile said:
Im wondering the same thing.Tell us when you test please.
Click to expand...
Click to collapse
ok first im updating my rom DU...new test build then once booted in to the system will flash the kernel and update how things go...:angel:
---------- Post added at 02:40 AM ---------- Previous post was at 02:17 AM ----------
flashed the kernel on Dirty Unicorn Build 25...every things good...no graphic glitches like Meow Kernel...
Bugs:
1) WiFi doesn't work. @aidfarh it would be good if you provide a Wifi module zip file till u find a way to resolve the issue.
2) A little digestible lag... while scrolling list view in settings and i also while scrolling side wise in the app drawer...
Suggestions.
1) More CPU governors. i know will happen today or tomorrow
2) Release Wifi Modules till the kernel is compatible with omni based roms
3) GPU overclocking can be peaked a little more higher (meow kernel had achieved it 450Mhz u can look in to it)
4) Never leave devloping this kernel as its the first for Omni and we got limited choice when it comes to kernel based on aosp and cm
But still for this stage the kernel is "remarkably good". lots of high expectations from all the omni rom and omni rom based rom users
Keep up the good work
I can confirm that it perfectly working with aslyum rom latest..nothing find unusual.. Post it soon regarding the battery life..
Edit: wifi reception was lower than stock omini..
Sent from my C6603 using Tapatalk
Vishalkris said:
ok first im updating my rom DU...new test build then once booted in to the system will flash the kernel and update how things go...:angel:
---------- Post added at 02:40 AM ---------- Previous post was at 02:17 AM ----------
flashed the kernel on Dirty Unicorn Build 25...every things good...no graphic glitches like Meow Kernel...
Bugs:
1) WiFi doesn't work. @aidfarh it would be good if you provide a Wifi module zip file till u find a way to resolve the issue.
2) A little digestible lag... while scrolling list view in settings and i also while scrolling side wise in the app drawer...
Suggestions.
1) More CPU governors. i know will happen today or tomorrow
2) Release Wifi Modules till the kernel is compatible with omni based roms
3) GPU overclocking can be peaked a little more higher (meow kernel had achieved it 450Mhz u can look in to it)
4) Never leave devloping this kernel as its the first for Omni and we got limited choice when it comes to kernel based on aosp and cm
But still for this stage the kernel is "remarkably good". lots of high expectations from all the omni rom and omni rom based rom users
Keep up the good work
Click to expand...
Click to collapse
I expected that wifi might not work with other roms or older omnirom builds. The latest omnirom kernel has updated wlan drivers but it also need updated wlan firmware to work. Try flashing the attached zip that contains the updated wlan firmware and see if it works.
Lags are hard to quantify and hard to fix. Try other CPU governors or I/O schedulers and see if things improve.
What CPU governor to do you want?
GPU overclocking is planned, but I can't promise anything.
FINALLY!!!! When i sow the thread title i couldn't believe my eyes
Long time we are waiting for a kernel that support Roms that are not based on stock, specially when u bring to us Gamma control and fast charge pleasure.
So i want to say thank u aidfarh from all of my heart, and yes plz don't stop this, keep the development up as much as u can cuz we need u
(now i feel like i am a little girl who asking too much LOL).
I am about to flash PA today, will flash it and I'll try your kernel to see how it goes, and if it doesn't then i'll back to my favorite ROM Dirty Unicorns then i'll try again.
Thank U :victory:
works good in DU
Sent from my C6603 using Tapatalk
off-topic: hahaha ROJAK kernel. typical orang malaysia in naming mixed things!
back to topic, could you include FIOPS IO scheduler by faux123? According to faux, intellidemand/active works the best when combine with FIOPS scheduler.
kingrion88 said:
off-topic: hahaha ROJAK kernel. typical orang malaysia in naming mixed things!
back to topic, could you include FIOPS IO scheduler by faux123? According to faux, intellidemand/active works the best when combine with FIOPS scheduler.
Click to expand...
Click to collapse
Thanks for your suggestion. I'll take it under consideration.
Will this kernel work on Paranoid Android??
acutraaq said:
Will this kernel work on Paranoid Android??
Click to expand...
Click to collapse
Try the pacman kernel will work
Sent from my C6603 using Tapatalk
OK.. It's working on DU 15/03/2014 build, had no WIFI but after flashing wlan firmware the WiFi get fixed.
I don't have any random errors, FC's, Reboots, lags... everything is perfect.
One thing I've noticed is Gamma control, the sittings doesn't stick after reboot and i don't now if that is the same for fast charge or for the
o/u clocking.
Will keep testing...
Its working flawless on infected's omni build 0324. Hope u keep updating this Bad ass. No issues at all so far. Cant wait for the sound control! Thank you dude.
Gesendet von meinem C6603 mit Tapatalk
I need to buy the app to use gamma control,right?
FakeSmile said:
I need to buy the app to use gamma control,right?
Click to expand...
Click to collapse
Yes faux clock
Sent from my Xperia Z using Tapatalk
Lightning kernel
this kernel is made for cyanogenmod 11 roms and i take no responsibility if you brick,destroy your device due to this kernel
features
sound control 3.2
gpu overclock to 627mhz
intelli thermal
cpu overclock upto 1836mhz(disable mpdecision)
compiled with linaro 4.9.1
added intelliactive,intellidemand,preservative,hyper,wheatley,lionheart governors
row,fiops,tripndroid io schedulers
undervolting
sweep to wake and double tap to wake
auto mpdecision (turn off stock qcom mpdecession)
sound stuttering fixed(zzz sound while hearing music)
Motorola MSM memcpy enhancements
cpu unallingnment access
kernel mode neon
exfat support
gpu voltage control
multi rom byOlivier (sony 233 blobs)
more to come
source code https://github.com/nikhil18/android_kernel_sony_apq8064
installation instructions
flash the zip in recovery
for extreme overclocking disable qcom mpdecision
Setting custom GPU Voltages via sysfs
NB:
- Safe lock is present on MIN/MAX values:
Quote:
#define GPU_MIN_VDD 900000
#define GPU_MAX_VDD 1200000
The default GPU voltages are:
Quote:
+ [VDD_DIG_NONE] = 0,
+ [VDD_DIG_LOW] = 975000,
+ [VDD_DIG_NOMINAL] = 1075000,
+ [VDD_DIG_HIGH] = 1175000
Verify the actual settings:
Quote:
cat /sys/devices/system/cpu/cpu0/cpufreq/gpu_mv_table
975000
1075000
1175000
Adjust to desired values and verify:
Quote:
echo "930000 1000000 1100000" > /sys/devices/system/cpu/cpu0/cpufreq/gpu_mv_table
credits
doomlord for kernel building instructions
jeroenqui for meow kernel
thomas1991_12 for linux patches and features
cyanogenmod for kernel source
Tommy-Geenexus for guidance
faux123 - For almost all kernel features
Alx31TLse-for ramdisk
XDA:DevDB Information
Lightning kernel, Kernel for the Sony Xperia Tablet Z
Contributors
nikhil18
Kernel Special Features:
Version Information
Status: Testing
Created 2014-09-20
Last Updated 2014-09-20
changelog
version 1-initial release with all features
downloads
nikhil18 said:
changelog
version 1-initial release with all features
Click to expand...
Click to collapse
Awesome but which do I use for tablet z 312
cantenna said:
Awesome but which do I use for tablet z 312
Click to expand...
Click to collapse
pollux windy is wifi and pollux is wifi and 3g
.....
Does it also work on omnirom?also which app should we use to control cpu/gpu overclock?trickster mod or setcpu?
pangiotis24 said:
Does it also work on omnirom?also which app should we use to control cpu/gpu overclock?trickster mod or setcpu?
Click to expand...
Click to collapse
no it wont work on omni rom because its not cm based you can try carbon rom and use trickstermod kernel app available on playstore for cpu and gpu settings
gpu acceleration
Nog possible to use hardware acceleration in video. Used bsplayer and xbmc. Device resets. No overclock, just default settings. Pollux windy.
adoe said:
Nog possible to use hardware acceleration in video. Used bsplayer and xbmc. Device resets. No overclock, just default settings. Pollux windy.
Click to expand...
Click to collapse
Doesn't seem to work with multi rom, is it possible?
cantenna said:
Doesn't seem to work with multi rom, is it possible?
Click to expand...
Click to collapse
it should work because the kernel is multirom patched but only the twrp recovery is missing
if only CM have working GPS... daamn
Using this kernel the app animations lag a lot, also it seems like even though I'm forcing the min and max CPU clock to 1836mhz, It's still maxing out at the default 1.5ghz. Using the latest CM11 nightly on the pollux with a clean install. Any suggestions?
ok guys version 1 reuploaded the problem was the voltages which i did not change for the tabs and please use simple gpu governor because ondemand drains more battery.
Rootk1t said:
and what about interactive governor?
Click to expand...
Click to collapse
Could not find a proper commit for the governor but I had put one from nexus 4 but it did not work
nikhil18 said:
ok guys version 1 reuploaded the problem was the voltages which i did not change for the tabs and please use simple gpu governor because ondemand drains more battery.
Click to expand...
Click to collapse
and what about interactive governor?
I Love you OP! thanks for a custom kernel for my pollux windy will Try tomorrow
This is a really good kernel! Possible to make it compatible with aero control from play store? Cheers
cantenna said:
This is a really good kernel! Possible to make it compatible with aero control from play store? Cheers
Click to expand...
Click to collapse
It is compatible but trickster mod app is still better
Sent from my C6603 using XDA Premium HD app
Seems to be one of the best kernel
As title say, it's true. I installed this kernel o cm11.pollux10072014 and everything is just great. I was made my root with a help by xzdualrecovery. Put some mods as a beats 2.0 and voilà... Everything is a perfect. CPU is ticking on 1728 MHz with a governor INTERACTIVE and GPU is on 627 MHz and the governor is PERFORMANCE. I'm using 3c toolbox pro, formerly called Android Tuner to set all clocks, governors and build.prop and the stuff include OOM, SD Card boost, Entropy etc. etc. So now, I have in a new Antutu benchmark (5.1) score about 25500 points. So big thanks to the developer for this great kernel. Have a great time, Peter :good: :laugh:
nikhil18 said:
It is compatible but trickster mod app is still better
Sent from my C6603 using XDA Premium HD app
Click to expand...
Click to collapse
Any chance for an aosp kernel?
I find omnirom the smoothest rom for pollux_windy.
varben said:
Any chance for an aosp kernel?
I find omnirom the smoothest rom for pollux_windy.
Click to expand...
Click to collapse
No bro I need to make the kernel from scratch and I don't have time but I am going to make a kernel for omni ROM when lolipop comes out which will be also compatible with cm12
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you
* getting fired because the alarm app failed. Please do some research if you have any
* concerns about features included in this ROM before flashing it!
* YOU are choosing to make these modifications, so choose wisely.
*/
introduction
before it is too late and noone has interest in this phone any more, I want to present to you my own kernel for huashan
I started this development with my kitkat rom but as cm-11.0 is not updated any further, I give you the chance to try the kernel with any other rom
Click to expand...
Click to collapse
features
build system optimizations
> O3 optimization level, strict-aliasing and no debug information
gcc 4.9 toolchain by linaromod with graphite optimizations
updated to Linux 3.4.101
governors smartactive2, tripndroid, intellimm, intelliactive, dancedance, lazy, blueactive, smartmax, interactive, hyper, ondemand, wheatley, slim, lionheart and performance
underclocking to 189MHz
undervolting
msm hotplug by @myfluxi
usb fastcharge (and a little more fastcharge options in /proc)
io scheduler noop, deadline, cfq, sio, sioplus, fifo, zen, row, fiops
frandom support
included mods
zip align
vm tweaks performance script
requirements
unlocked bootloader (lbl is untested)
knowing how to restart to recovery
cwm backup in case something goes wrong
willing to face dragons
credits
Google
CyanogenMod
FXP
pbeeler
@Cl3Kener
uberlaggydarwin
@myfluxi
@Tomoms
@mikeioannina
@DooMLoRD
... sorry to everyone I forgot and use his/hers patches.. tell me, you will get proper credit :good:
XDA:DevDB Information
ndED kernel - Linux 3.4.101, Kernel for the Sony Xperia SP
Contributors
nosedive
Source Code: https://github.com/nosedive/android_kernel_sony_msm8x60
Kernel Special Features:
Version Information
Status: Nightly
Created 2015-09-07
Last Updated 2015-09-06
installation
I do not edit your ramdisk during installation. you need to set your kernel options yourself
check requirements
download zip to sdcard
flash via recovery
i recommend Kernel Audiutor for settings kernel parameters. thanks to @Grarak for his wonderful app
"schöne Grüße "
downloads
cm-11 based roms only -> 2015-09-06_00-11-33_kernel_msm8x60_cm_viskan_huashan_defconfig-signed.zip - MD5 be084c0120be5a6ea2841ef4bdc94d2f
work on cm12.1 ?
Linux 3.4.101, underclocking and the CPU governors are great features. Finally we have more kernels. Congratulations @nosedive, great job!
Only Fauxsound is missing for me Other than that this is preety good kernel!
I'm trying to install with TWRP 2.8.7.0. the process seems correct but when I reboot tangerine kernel is still there.
Like @ma4a3er asks, is this kernel to lollipop cm12.1 based roms?
Anyway, thanks for your work.
Not work on LBL .
Tested on CM11 by @bagyusz
It seems a kernel with many features, but i still dont understand for what rom is it made?
before it is too late and noone has interest in this phone any more, I want to present to you my own kernel for huashan
I started this development with my kitkat rom but as cm-11.0 is not updated any further, I give you the chance to try the kernel with any other rom
Click to expand...
Click to collapse
It's on OP guys
kac222 said:
Not work on LBL .
Tested on CM11 by @bagyusz
Click to expand...
Click to collapse
1. It's kernel, you can't change kernel on locked bootloader
2. It's stated even in the title that it's for unlocked bootloader
3. Works on every rom
not working on xenon (09-05-2015)
gives bootloop (recurring of sony logo )
Not Working
Not working on ARCHxperia 1.2.4 LP edition can't able to flash stuck while flashing (cynogen recovery)
nor on XENON rom
---------- Post added at 07:37 PM ---------- Previous post was at 07:36 PM ----------
avi.singh9993 said:
not working on xenon (09-05-2015)
gives bootloop (recurring of sony logo )
Click to expand...
Click to collapse
Did you able to flash Properly ? On Cynogenmod recovery i can't
Cyanogen recovery can't flash ****,
In tommoms cubeserver folder there is a twrp flashable file which makes it default recovery. Always flash that after rom.
Alvichone said:
I'm trying to install with TWRP 2.8.7.0. the process seems correct but when I reboot tangerine kernel is still there.
Like @ma4a3er asks, is this kernel to lollipop cm12.1 based roms?
Anyway, thanks for your work.
Click to expand...
Click to collapse
if you have tkernel v8 or v9 you have to uninstall it first. use the tkernel unistaller that is in http://cubeserver.eu search it on tommons folder., download and flash. then you´ll be able to flash this kernel
sorry for my english
Yes, i tried it but didn't work.
I have xenonhd with t kernel 9.0
Edit: I have tried again but i have bootloop in sony screen all the time. Maybe in another ocasion, i will stay in tangerine kernel.
3.4.101 congratulations !!
Works with last CM11 snapshot .. but isn't smooth :x
Gaming performance is not good.... :/
Tapatalk-kal küldve az én Xperia SP-el
how do you update linux version ?
Installed it over Williams kernel.... No effect. Williams stays on the phone?! Why? Any idea?
This is my custom kernel for Dior(Redmi note 4G single SIM).Will work on all CM/AOSP based roms
Use "Kernel Aduitor" app from Play Store to change kernel parameters
To install,Download attached file and flash using recovery.No need to wipe anything!
Features/Changelog
V1.7
Compile with UBERTC GCC 4.9
Add Alucard Hotplug as default
Remove DEBUG_KERNEL and loads of debug and HID drivers.User RAM now 1876 MB
Remove unneded panel drivers
Note: If u want to sacrifice battery for performance,disable hotplug using Kernel Aduitor app
V1.5
Fix touch edge bug for some touchscreens
Compile with GCC 4.9
Remove GPU OC for now
Faux's Sound Control
Savoca's KCAL support for post processing control [v2]
Replace Qcom's MPDecision with Faux123's IntelliPlug hotplug(default)
Add new IO Schedulers: Sio,Sio+,Tripndroid,Zen
New CPU Governors: Smartmax,Darkness,Intellimm,Yankactive,Wheatley,SmartAssH3,Nightmare,Intellidemand,Asswax,Adaptive,Abyssplug,Abyssplygv2,Alucard,Lionheart
Even more RAM unlocked
ARM_UNWIND disabled
Use Ext4 for Ext2/3
V1.0
GPU OC to 480 Mhz
CPU OC upto 1693 Mhz
Removed some debug/bloat from kernel
More RAM available to user
Sources
https://github.com/sakindia123/android_kernel_xiaomi_dior
Thanks to Faheem Kamal,Wang Hao Yang and audahadi for device bringup
is this kernel will cause heating issue:what:
Is this kernel worth it or will it make the device more oven like cause I can barely play some games.. Like FTS2015..
TheAqib
Send from my RedMi Note4G
Awesome work Sarthak! Thanks a lot for your efforts.
Sent from my HM NOTE 1LTE using Tapatalk
Will you update this kernel?
Edit: ive seen your github. I hope the hotplugs are not messed up lol. Ive seen people make kernels with 2 hotplugs active lol. Will it still support cm12.1?
OldYellowBricks said:
Will you update this kernel?
Edit: ive seen your github. I hope the hotplugs are not messed up lol. Ive seen people make kernels with 2 hotplugs active lol. Will it still support cm12.1?
Click to expand...
Click to collapse
New update today or tomorrow.
I wont mess up the hotplugs :good:
V1.5 released.Edge touch fix included.See changelog in post#1
Did anybody test this kernel with latest MIUI 7?
Sent from my HM NOTE 1LTE using Tapatalk
Hi! Great kernel, but seems to be missing the "call touches while screen off problem" which is already fixed in faheem's kernel: https://github.com/faheemkamal/android_kernel_xiaomi_dior .
v1.7 released!
Just for CM/AOSP Roms?
Will this work on mokee 6.0?
Any plan to port from the current kernel source from 3.4 to lets say 3.10.x?
Hi! I'm on cm12.1, can I install this kernel? What are the instructions to install it? Will I lose my data? I have xposed installed.
pls update the camera drivers
in blisspop rom the camera goes fully black and then comes back multiple times when coming from sunlight to my home..
also will it work in 6.0 based roms ???
network problem
network reset while cellular data on.luckly i have install kernel auditor before flash this.change misc setting westwood to highspeed.n its seem okay for now.need to investigate more.i search kernel that can boost my gaming performance,but i too scared to try kernel auditor tweek.can u suggest to me.anyway thanks for this kernel.
@sakindia123 any plans to update the kernel..?
I tried on cm 11 ..its stable(some kind of spanish development) cpu Hotplugs were disabled by default .. .. But there was same lagg as it was before this kernel... And yes wifi stopped working too ...so yeah !!
Main error i found after installing this was my screen and home+back+menu buttons didnt work at all..
I'll try to see if it solves the touchscreen error, thanks!