Database Develop

[SCRIPT] Debloater for KitKat, JB & ICS

I no longer have this phone!
---
** Debloater for KitKat **
I decided to create a Debloater script for those that want a clean system.
I've used bits from NoMoto - Stock ROM Debloat Scripts (Moto G) by lost101
As with my previous debloater for JB, I've kept the stock launcher (and circle widget + weather).
Steps:
Prepare/flash your preferred KitKat Stock ROM
Flash + Boot into latest TWRP recovery
Flash Moto Razr i XT890 KitKat Debloater - v0.1.zip (attached below)
Flash the latest SuperSU (CWM / TWRP / MobileODIN installable ZIP)
Reboot.
What you should end up with after rebooting:
Have fun!

I no longer have this phone!
---
** Debloater for JB & ICS Stock ROMs **
This debloater was created using scripts from arman68's infiniROM Debloater v2 and bits from Motorola launcher remover v2.
I've also used a few bits & bobs from Razri-Cleaner v0.7, by GalaxyUser.
Steps:
Prepare your preferred JB Stock ROM to flash using RSD Lite (See here and here)
Boot into fastboot and flash custom recovery - I use the latest TWRP
Make a backup of the untouched stock ROM (so you don't have to keep using RSD Lite)
Flash Razr i [XT890] - Stock Lite 4.1.2.zip (attached in first post)
Flash the latest SuperSU (CWM / TWRP / MobileODIN installable ZIP)
Reboot.
What you will end up with after rebooting:
Enjoy. :good:
~
Note:
This works with Omar's ROM. :good:
This will also work for ICS. If you're using the Xposed Framework, you will get a Segmentation Fault upon installing the framework - You will need this.
~
I decided it would be best to keep the stock launcher (and circle widget + weather).
They can be disabled if you're using another launcher. If you disable gallery, you will need to install an alternative.
The following are safe to freeze/disable:

thanks buddy,what browser do you suggest?chrome is really laggy...

Try Dolphin Browser.

hi ! can i use it on an "used" ROM? i dont want to deleite muy files

Script in Kit Kat
Thankx ! :good:
it works in my Kit Kat , all appz working...

Does anybody know what the full dependencies of the Google Now Launcher are? For some reason after stripping the BR 4.4 ROM with this script, I can't get it to run after installing the dependencies it makes you install and tells you you're missing (e.g. Play Services, Google Search, Voice Search, etc). It just brings up the message about setting the default launcher by clearing the defaults for Moto home if you try to launch it.
I've got close enough I can almost convince myself it's real AOSP now just by freezing most of the Moto stuff (aside from that damn H/3G indicator in the status bar), but it'd be nice to have a 'one shot' solution like this if I have to wipe again.

Azurael said:
Does anybody know what the full dependencies of the Google Now Launcher are? For some reason after stripping the BR 4.4 ROM with this script, I can't get it to run after installing the dependencies it makes you install and tells you you're missing (e.g. Play Services, Google Search, Voice Search, etc). It just brings up the message about setting the default launcher by clearing the defaults for Moto home if you try to launch it.
I've got close enough I can almost convince myself it's real AOSP now just by freezing most of the Moto stuff (aside from that damn H/3G indicator in the status bar), but it'd be nice to have a 'one shot' solution like this if I have to wipe again.
Click to expand...
Click to collapse
I'm in the same situation with my moto g after running the debloat script from lost101. have you found whats been missing? it seems like the phone isnt recognizing GNL as a launcher

aben.dc said:
Im in the same situation with my moto g after running the debloat script from lost101. have you found whats been missing? it seems like the phone isnt recognizing GNL as a launcher
Click to expand...
Click to collapse
Had it last with mine too. Clear the cache of Google services. Of try to format cache in recovery.

Thanks for the suggestion i tried but didn't help i think there is some files missing that's been removed by the debloat script that's causing this

aben.dc said:
Thanks for the suggestion i tried but didn't help i think there is some files missing that's been removed by the debloat script that's causing this
Click to expand...
Click to collapse
hmm, strange.
Non off the stuff the script deletes is from google play services. So sry, i dunno then

Hi,
I am (was) a beta tester for the KitKat update release. During my test I also tried your KK debloater, I'm a big supporter of debloated roms.
I was on the last KK beta (before final) when I applied the debloater zip: all it was ok (super fast phone!), but when final OTA came out, the debloated KK rom did not receive any update. I wait till today and it is clear that the update will never come. I reinstalled the last Kk beta without debloating and the update came immediately.
I'have done more times the test and I can confirm that the KK debloater inhibits the Motorola updates.
OK, now final KK has been released...but if Moto decided to release another update (like small bugfix), with a debloated KK rom you do not never know the update is ready. The problem is not the installation (it is clear that is better to apply the update on a stock rom), the problem is that you do not receive any notification that tell you a new update is ready.
Do you have any idea how to fix the debloater script in order to be able to still receive system update notification?

[Rom][N910VOYU1ANI1][4.4.4] Stock Root Deodex/Knox-Free Updated 11/24/2014

[Rom][N910VOYU1ANI1][4.4.4] Stock Root Deodex/Knox-Free
Here is the Stock Flashable N910VOYU1ANI1 Rooted, Deodex, Knox Free. Built from the original factory image
All of my mods listed in my mods OP will work with this Rom: Grab Them Here!!!
I will build a Safe Strap version as soon as you retail guys get root with Safe Strap!!!
I need some testers for my new Rom. Please PM me if you are interested.
Requirments are TWRP Recovery
Features:
Deodex
Rooted
Zipaligned
Init.d support
Knox Free
ad blocking
Native WiFi Hotspot
Removed Verizon OTA updater
Removed How To Nonsense from Verizon.
Read/Write to external storage
ROM Zips:
Secure Storage = False Zip: https://www.androidfilehost.com/?fid=95832962473394561 Updated 11/28/2014
Secure Storage - True Zip: https://www.androidfilehost.com/?fid=95832962473394531 Updated 11/28/2014
With Secure Storage set to True Private Mode will function, with it set to False Private Mode will not function.
If you want to run Private Mode with Secure Storage set to false, just flash my Private Mode Mod found on my Note 4 Mod page.
A few apps will error out on start up. Just finish setup and go to the Play Store to update apps to fix problem.
The following factory apps have had all QMG. WEBP and ASET images converted to PNG'S:
SystemUI.apk
framework-res.apk
twframework-res.apk
SecSettings.apk
ClockPackage.apk
InCallUI.apk
SamsungIME.apk
SecCalculator2.apk
SecContacts_Note_USA.apk
SecEmail_K.apk
SPlanner.apk
SecMms_Cherry.apk
Installation Instructions:
1: DO A NANDROID
2: Download the ROM and copy it to your external SD card.
3: Do a complete wipe by checking Dalvik Cache, Data, Cache, Internal Storage and System from TWRP.
4: Install the ROM via TWRP.
5: Reboot and Enjoy
Please be patient when the phone reboots. It will sit on the boot animation for as long as 5 min.
If you decide not to follow these instructions and have problems please don't complain that something is not working!!!
PLEASE DON'T FORGET TO HIT THANKS!! THIS TOOK MANY HOURS TO PUT TOGETHER!!!!
If any other Dev's want to use this as a base, please feel free to do so with proper credit!! No need to ask me!!

Great work @EMSpilot! Bout time someone with great integrity put out a rom Thanks for all the hard work

This should be mention that this is for the Developer Edition Only!

Rom
Poloasis said:
This should be mention that this is for the Developer Edition Only!
Click to expand...
Click to collapse
Actually it would run perfectly on a stock Verizon Note 4 if it had Root and a working TWRP recovery!!!! If that ever happens!!!! If and when they achieve root and safestrap on the stock version. I will mod to make it work with safestrap.

EMSpilot said:
Actually it would run perfectly on a stock Verizon Note 4 if it had Root and a working TWRP recovery!!!! If that ever happens!!!! If and when they achieve root and safestrap on the stock version. I will mod to make it work with safestrap.
Click to expand...
Click to collapse
Roger that, I tough also it would. BTW great job. I was loosing hope on this phone very quickly lol

Almost pissed myself ......yeah I'm on retail

thanks ! will give this a go after a backup.

laughingcolors said:
thanks ! will give this a go after a backup.
Click to expand...
Click to collapse
during setup, it said maps and google+ failed. message pops up a few times, Google+ comes up a few times.

Old Apps
laughingcolors said:
during setup, it said maps and google+ failed. message pops up a few times, Google+ comes up a few times.
Click to expand...
Click to collapse
Yes please read the OP. Those apps will error out until you update them via the Playstore.
They are the original apps from the factory firmware.

EMSpilot said:
Yes please read the OP. Those apps will error out until you update them via the Playstore.
They are the original apps from the factory firmware.
Click to expand...
Click to collapse
my bad !

what is meant by secure storage? whether the sd card is secured?

Great Job! Now if I could only get my hands on a Note 4 DE. Maybe someday! haha!

Great job. Thanks for being the first!!!

With this ROM can I enable ART? I am running Xposed currently, to enable wifi tether.
However, I basically want a stock rom with knox removed, and verizon stuff removed, and wifi tether and secure storage enabled. This sounds exactly like that, I also want to maybe try out using ART instead of dalvik. (Even though I am to ignorant to know the full implications behind the change, I do know that with Xposed, I have to keep my phone on dalvik.)
Thanks. And thanks were given for this rom already! You rock.

ART
Menchelke said:
With this ROM can I enable ART? I am running Xposed currently, to enable wifi tether.
However, I basically want a stock rom with knox removed, and verizon stuff removed, and wifi tether and secure storage enabled. This sounds exactly like that, I also want to maybe try out using ART instead of dalvik. (Even though I am to ignorant to know the full implications behind the change, I do know that with Xposed, I have to keep my phone on dalvik.)
Thanks. And thanks were given for this rom already! You rock.
Click to expand...
Click to collapse
I have not tried ART yet. But the needed items for it are in the ROM!!

app error's
laughingcolors said:
my bad !
Click to expand...
Click to collapse
Fixed Google app error's during install!!!

ART
Menchelke said:
With this ROM can I enable ART? I am running Xposed currently, to enable wifi tether.
However, I basically want a stock rom with knox removed, and verizon stuff removed, and wifi tether and secure storage enabled. This sounds exactly like that, I also want to maybe try out using ART instead of dalvik. (Even though I am to ignorant to know the full implications behind the change, I do know that with Xposed, I have to keep my phone on dalvik.)
Thanks. And thanks were given for this rom already! You rock.
Click to expand...
Click to collapse
Been running ART for about an hour!! Seem's to run Great!!!

just flashed it with no problem.
Ran into a problem with installing apps. It'll download and then just get stuck. I'll do more testing and see if its the rom or myself.

mithusingh32 said:
just flashed it with no problem.
Ran into a problem with installing apps. It'll download and then just get stuck. I'll do more testing and see if its the rom or myself.
Click to expand...
Click to collapse
Same problem here with downloading apps from playstore.
Sent from my Dev Note 4

Did you guys download securestorage=true or false version?

Install & run Android Marshmallow on the M7 - VanirAOSP ROM - UPDATED 4/24/16

There is a way to get Marshmallow on the HTC ONE Sprint M7, it's called VanirAOSP ROM. This is a great in most ways, and it's now my daily driver, but be very careful, I almost bricked my phone a few times in setting things up. Here are some tips from what I learned.
Installation instructions (learned from this video, other sources, and hard work):
1) Unlock bootloader.
2) Install custom recovery like TRWP. If you have an old version of TWRP, upgrade it using TRWP Manager or Flashify.
3) Download latest nightly ROM from http://www.emccann.net/nuclearmistake/VanirAOSPNightlies/m7spr/.
4) Download gapps. Biker57 suggests gapps from http://www.emccann.net/dho/5-Gapps/ as it's supposed to cause fewer force closes. I believe 60arm-DHO-GAPPs.zip is the correct file name.
5) Download SuperSU. Biker57 likes SuperSU v2.64 found here http://forum.xda-developers.com/showpost.php?p=64161125.
6) Copy all 3 downloads (in .zip format) to the phone (internal storage, like the TWRP folder)
7) Enter bootloader (volume down and power button), then select bootloader.
8) Backup the current ROM, just in case things go bad like they did for me.
9) From TWRP, enter advanced wipe and select system, data, cache, and dalvik cache. Do not select internal storage as you will lose your current backup and other zips if you do (there is an exception to this, as I did it, but I nearly bricked my phone). Now slide to wipe.
10) Go to install, and first select the ROM's zip. Then choose add more zips and select the gapps zip you downloaded. Next select SuperSU. Now slide to install.
11) Be patient during install.
12) Wipe dalvik cache.
13) Reboot to system (aka phone).
14) Enable Developer Options (if you want), by going to Settings->About and hitting Build Number many times until it's enabled.
Known issues and workarounds:
-Camera app force closes after taking a picture - the picture saves, so just reload Camera app. I've also had good luck using Z Camera then viewing the preview before hitting back to reenter the camera app.
-Stock dialer FCs randomly - Install another dialer app, like True Phone.
-Facebook and Facebook Messenger force closes - use mobile website, which actually isn't too bad, or try the instructions listed here.
-Flashlight turns off after 3 seconds - use the cameras flash instead.
Known issues with no good workarounds:
-FM Radio doesn't work.
-Bluetooth audio doesn't work for phone calls most of the time.
-Switching the battery mode causes the brightness to change randomly - don't ever switch away from balanced mode
Other stuff
-You can find more about the updates made to Vanir ROM here.
-It's risky to play around with the radio, but if you want to try it they are listed here.
-Intersted in supporting Varin, you can donate here.
Please let me know if I missed anything. And feel free to copy freely if it helps others.
***disclaimer - follow at your own risk. I'm not responsible for what might happen to your phone. This is only a cheat sheet, and it's for reference purposes only.***

First off, good tutorial. :good:
Vanir is a great ROM but this Sprint ROM still has a lot of bugs in it. I've used the first Vanir Marshmallow ROM to the most recent and a plethora of bugs have been squashed. But this ROM is still not DD ready, the camera , torch, gapps, browser and settings are broken. I am not saying this ROM is bad, just that its not fully ready yet. Depending on the dev, this rom should be DD ready in 2-3 weeks, they've been releasing more often now. Thank the developer if you know him but if you're the developer, thank you.
We should try to get the dev to see if they can put up a Vanir thread with change logs and the whole shebang.

I'm glad this thread was started and the OP was done well. I've been using this ROM for a while and thought I'd pass along my thoughts and what works for me.
This rom has become my daily driver after learning how to fix a couple of issues. After the latest update of 2/18 the biggest issues of not having a cellular/data connection has been corrected. The only issues that remain for me at least are the camera and Facebook issues. Although the camera does force close it does so for me at least after the picture is taken and saved so it's all good for me. The Facebook issues are corrected by deleting a file in both the Facebook and Messenger file.
The following method works for me without boot loops or any other issues and hopefully will work for you too. I flash these all at the same time loaded in the order listed and don't forget to make a backup before you start just in case.
1 - Flash the 2/18 nightly just like you would any rom http://www.emccann.net/nuclearmistak...ghtlies/m7spr/
2 - flash the gapps found here http://www.emccann.net/dho/5-Gapps/ and select the 60arm file near the bottom.
3 - flash Super SU 2.64 found here http://forum.xda-developers.com/showpost.php?p=64161125 There are new versions, but the 2.64 has continued to work for me.
4 - Reboot
As I said earlier this works for me and I've used this method with their roms successfully a number of times. Good Luck !!

Thank the developer if you know him but if you're the developer, thank you.
Click to expand...
Click to collapse
I'm not the developer, and I don't know the developer. But I would thank him or her if I could. I'm just interested in running Marshmallow on the M7. I will update the original post as I learn more so I can hopefully help others.

anotherfakeusername said:
I'm not the developer, and I don't know the developer. But I would thank him or her if I could. I'm just interested in running Marshmallow on the M7. I will update the original post as I learn more so I can hopefully help others.
Click to expand...
Click to collapse
If you need help with thread stuff I can help, we should start a new thread completely and give it more of a ROM thread look with known bugs, work a rounds and honest opinions on it.

biker57 said:
3 - flash Super SU 2.64 found here http://forum.xda-developers.com/showpost.php?p=64161125
Click to expand...
Click to collapse
Since my device is already rooted, would I be best off to install Super SU from the Play Store, then allow the app to upgrade through TWRP?

anotherfakeusername said:
Since my device is already rooted, would I be best off to install Super SU from the Play Store, then allow the app to upgrade through TWRP?
Click to expand...
Click to collapse
I'm not the developer either... Just a happy ROM user
There have been some issues with certain SU not working correctly with 6.0. You can try that but I would advise you to try a proven SU version.

is Snapchat also broken
Sent from my HTC One using Tapatalk

SuperSU 2.65 through TWRP 3.0.0-0
anotherfakeusername said:
Since my device is already rooted, would I be best off to install Super SU from the Play Store, then allow the app to upgrade through TWRP?
Click to expand...
Click to collapse
I didn't install it from the Play Store, I just flashed this version (2.65) through TWRP 3.0.0-0 and it's working as expected :good:

Hello,
Flashing SuperSU through recovery is a better way, atleast for Marshmallow ROMs now. I'm using latest beta version (SuperSU v2.67) without any issues. It can be found in official SuperSU thread here.
As of camera issues, you can use 3rd party camera apps like Camera FV-5, ProShot or etc. Of course they cost few bucks but worth it. Issue doesn't solve totally in this ROM but app doesn't force close, instead freezes for few sec and then works again.
This ROM is my DD and faced no major issues so far. What I'm mostly missing is fast charge feature in kernel otherwise normally it takes plenty of hours to fully charge.
Kindly note; you have to flash gapps provided by the ROM developer. Other gapps like open gapps will endup with FC.
Thanks...
Best Regards

CRACING said:
Kindly note; you have to flash gapps provided by the ROM developer. Other gapps like open gapps will endup with FC.
Click to expand...
Click to collapse
I flashed the gapps provided by the ROM developer, but the Gmail app is force closing due to "unknown issue with Google Play services.".
Then I tried using USB OTG to read my sd card reader in TWRP, but TWRP won't mount it. The issue started right after I booted the ROM the first time; I know because I installed the ROM from my sd card using USB OTG.
I still want this to be my daily driver, because the software is so much faster that 4.3, but I'm not convinced yet.

anotherfakeusername said:
I flashed the gapps provided by the ROM developer, but the Gmail app is force closing due to "unknown issue with Google Play services.".
Then I tried using USB OTG to read my sd card reader in TWRP, but TWRP won't mount it. The issue started right after I booted the ROM the first time; I know because I installed the ROM from my sd card using USB OTG.
I still want this to be my daily driver, because the software is so much faster that 4.3, but I'm not convinced yet.
Click to expand...
Click to collapse
Their list of gapps is rather long......which one did you use and did you flash it with the rom

You guys are right. I had to flash Super SU through TWRP (which was a challenge at first without using the sc card and OTG cable).

anotherfakeusername said:
You guys are right. I had to flash Super SU through TWRP (which was a challenge at first without using the sc card and OTG cable).
Click to expand...
Click to collapse
Correct, they have to be flashed with the rom as I mentioned in post 3.

anotherfakeusername said:
I flashed the gapps provided by the ROM developer, but the Gmail app is force closing due to "unknown issue with Google Play services.".
Then I tried using USB OTG to read my sd card reader in TWRP, but TWRP won't mount it. The issue started right after I booted the ROM the first time; I know because I installed the ROM from my sd card using USB OTG.
I still want this to be my daily driver, because the software is so much faster that 4.3, but I'm not convinced yet.
Click to expand...
Click to collapse
As of error "Unknown issue with Google Play service", go to Settings -> Apps -> Google Play service -> click 3 dot button in the corner -> Uninstall updates. This should solve the problem.
As of OTG, I didn't tested it but usb connection from TWRP to pc for file transfor works fine.
Btw; You are right, ROM is indeed fast.
biker57 said:
Their list of gapps is rather long......which one did you use and did you flash it with the rom
Click to expand...
Click to collapse
Use 60arm-DHO-GAPPs.zip
anotherfakeusername said:
You guys are right. I had to flash Super SU through TWRP (which was a challenge at first without using the sc card and OTG cable).
Click to expand...
Click to collapse
Even if you install supersu from playstore, it ask to reboots to recovery to install supersu. But before you accept to reboot, you'll have to enable root access to apps in developer options. Otherwise supersu cannot reboot or go into recovery.
Anyhow, instead of going through all these, I simply flash supersu zip from recovery.

CRACING said:
As of error "Unknown issue with Google Play service", go to Settings -> Apps -> Google Play service -> click 3 dot button in the corner -> Uninstall updates. This should solve the problem.
Click to expand...
Click to collapse
Android won't let me uninstall the Google Play service update. I get blocked when trying. It claims the app is an active device administrator, but it's not listed when I click manage device administrator.

anotherfakeusername said:
Android won't let me uninstall the Google Play service update. I get blocked when trying. It claims the app is an active device administrator, but it's not listed when I click manage device administrator.
Click to expand...
Click to collapse
Deselect Android Device Manager. Later when you uninstall the update, reselect Android Device Manager.

Deselect Android Device Manager. Later when you uninstall the update, reselect Android Device Manager.
Click to expand...
Click to collapse
That worked to fix my calendar syncing issues! Thanks!
Is not updating Google Play service going to cause other problems?

anotherfakeusername said:
That worked to fix my calendar syncing issues! Thanks!
Is not updating Google Play service going to cause other problems?
Click to expand...
Click to collapse
No such problems noticed here. I use Google calendar but Android calendar also works fine.
May be you should try rebooting or wait for some time and try resync.

CRACING said:
No such problems noticed here. I use Google calendar but Android calendar also works fine.
May be you should try rebooting or wait for some time and try resync.
Click to expand...
Click to collapse
The problem isn't using Google calendar, the problem is syncing Google calendar. I tried waiting, rebooting, re-adding my account, and everything else, but that didn't help.
Only downgrading Google Play services worked, and then Google calendar synced right away.
Thanks for the suggestions. Hopefully as they update the ROM it'll get resolved more fully.

[ROM] Chinese Marshmallow ROM for ZTE Axon Elite (A2016) international

I was able to install Chinese ZTE Axon Elite (A2015) Marshmallow rom to my international version of Axon Elite (A2016). Wifi, mobile data network and calling works. All Google apps are working too, Chinese rom has google services installed but those are needed to be activated by allowing them run in a background. Only Chinese and English languages available, but system is working in your local language after installing More Locale 2 from Google Play.
This ROM is not rooted, so you need to install Super User in TWRP right after installing this ROM.

Changes:
Added modem files (modem.b00-modem.b22, modem.mdt) from international B06 NON-HLOS.bin.
Minor build.prop changes (e.g. changed English as default language).
Removed stock recovery.
Added Google Play, Google Contact sync, Google Calendar sync, Google Gmail, Google Exchange sync, Google Phone, More Locale 2.
Removed all possible Chinese ZTE bloatware (over 200MB). I had to leave Mi-Assistant so that it can be used for allowing apps running in a background (example Google Play, Super SU).
[*]Added stock Marshmallow boot animation and removed boot sound.
Features:
Latest Google Security patch
MiFavor UI 4.0 with new themes and fonts
Applications Avatar (I have no idea what it is)
Toolbox - including compass, noise test, ruler, protractor, level meter, paintings
Calendar, shows weather for five next days
New Desktop backup and recovery capabilities
Long screenshots
More system Sleep functions
Smoother UI animations
SMS two-finger zoom
New power limits
Enhanced ZTE lock screen
...and some more which might not be useful in other countries than China (please check more details from: http://www.myzte.cn/thread-270646-1-1.html)
Working:
Wifi, mobile network, mobile data, bluetooth.
Fingerprint scanning.
Google Play services + other Google apps are working too (like Calendar, Contacts sync), but must be activated in Mi-Assistant Auto-start manager and allowing permissions in apps. Please see attached images for example.
Bugs and limitations:
NFC doesn't work.
Only Chinese and English languages, but it is possible to use More Locale 2 app (included in ROM) to change locale settings. Then apps (and part of the system) are working on your defined language. On my opinion it works just like in B06. More Locale requires Root access and executing ADB command (app shows the needed command) to change locale.
Download (B15M beta, updated 09.09.2016):
Mega https://mega.nz/#!cRAXTbqQ!UYTEzWb4AH5yZbcI4fK_09QBM5TYgvCCMMl1uTijetE
Based on the tip from @martas.vavra, I removed stock Chinese recovery so TWRP is not deleted after installing this rom.
Working Super user can be downloaded here https://cloud.tapatalk.com/s/57550023717f4/SuperSU_V2.62-3.zip. Thanks again @martas.vavra.
Quick steps:
(optional) Backup all apps by using ZTE own backup/restore app. It's then possible to restore apps after rom installation.
Install TWRP+root by using the method by @acer73: http://forum.xda-developers.com/zte-axon/development/zte-axon-elite-a2016-twrp-root-t3237760
Copy ZTE_Axon_Elite_A2016_unofficial_B15M_09092016 to SD card.
Boot to TWRP recovery.
Do full backup in TWRP.
Do factory reset in TWRP.
Install ZTE_Axon_Elite_A2016_unofficial_B15M_09092016 from SD card in TWRP. NOTE! Status bar is not progressing at all when installation is ongoing! Don't panic. Just wait, it will complete.
Install Super User .zip again.
Reboot. Please be patient, first boot will take minutes to complete.
After first boot is complete, start Mi-Assistant and enable apps (Google Play, Google Contacts, SuperSU... etc) in Auto-run Manager.
Enable app permissions for Calendar, Contacts, Phone, SMS, Storage in Settings -> Apps, App permissions.
Reboot.
(optional) Restore apps by using ZTE own backup/restore app. ZTE has removed Backup/restore app but here's download link for backup/restore app from B12M: https://mega.nz/#!hZQ2HTbb!IvTJu17kjibXGSJBsRUutz0wwPZL0XlruDVAyExqsC8
Note to users: I'm not responsible if you brick your phone, so please be careful!

Thank you for your efforts! Great to hear that there are only minor bugs. :fingers-crossed:
Leaves me thinking about why ZTE does not provide this update by themselves if there are only few things needed to be adjusted in order to make this work...

There is a CM 13 for chinese Axon http://www.myzte.cn/thread-263527-1-1.html It should work

martas.vavra said:
There is a CM 13 for chinese Axon http://www.myzte.cn/thread-263527-1-1.html It should work
Click to expand...
Click to collapse
I am afraid it does not work, as @brainmaster already tried booting it - without success.
Please refer to his post here:
http://forum.xda-developers.com/showpost.php?p=66497035&postcount=5

This is great! Thanks a lot
GalaxyFan88 said:
I am afraid it does not work, as @brainmaster already tried booting it - without success.
Please refer to his post here:
http://forum.xda-developers.com/showpost.php?p=66497035&postcount=5
Click to expand...
Click to collapse
But maybe it will work using the same method the opener of the thread used! (aka replacing the radio). I don't know though...

Dapalm said:
This is great! Thanks a lot
But maybe it will work using the same method the opener of the thread used! (aka replacing the radio). I don't know though...
Click to expand...
Click to collapse
You can read here. Its not just about the radio partition.

Like already mentioned, when trying to add PIN lock, settings will force close. I also compared international B05 and Chinese marshmallow rom files and noticed differences on fingerprint modules and apps, so I believe we are out of luck here.

suunnittelija said:
Like already mentioned, when trying to add PIN lock, settings will force close. I also compared international B05 and Chinese marshmallow rom files and noticed differences on fingerprint modules and apps, so I believe we are out of luck here.
Click to expand...
Click to collapse
I think that copying that files, modules and apps would be possible, from one to another, won't you? I have no idea of how to doing it, but maybe it is easy for someone experimented in rom's modding.
@suunnittelija how about the batttery life?

Mononitoto said:
how about the batttery life?
Click to expand...
Click to collapse
Unfortunately I don't know, because I was testing this rom just half day. On that time I didn't notice battery drain. I returned back to B06 because my phone has to be password protected and I just can't live anymore without fingerprint scanner.

suunnittelija said:
Unfortunately I don't know, because I was testing this rom just half day. On that time I didn't notice battery drain. I returned back to B06 because my phone has to be password protected and I just can't live anymore without fingerprint scanner.
Click to expand...
Click to collapse
What would be necessary to do, to port fingerprint scanner etc to this rom?

Mononitoto said:
What would be necessary to do, to port fingerprint scanner etc to this rom?
Click to expand...
Click to collapse
Probably it's nothing to do with fingerprint scanner. I checked logcat file and settings will force close before that. Settings will force close right after trying to enable PIN code lock.
Code:
FATAL EXCEPTION: AsyncTask #3
Process: com.android.settings, PID: 8191
java.lang.RuntimeException: An error occurred while executing doInBackground()
at android.os.AsyncTask$3.done(AsyncTask.java:309)
at java.util.concurrent.FutureTask.finishCompletion(FutureTask.java:354)
at java.util.concurrent.FutureTask.setException(FutureTask.java:223)
at java.util.concurrent.FutureTask.run(FutureTask.java:242)
at android.os.AsyncTask$SerialExecutor$1.run(AsyncTask.java:234)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1113)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:588)
at java.lang.Thread.run(Thread.java:818)
Caused by: java.lang.NullPointerException: Attempt to read from field 'int com.android.server.LockSettingsStorage$CredentialHash.version' on a null object reference
With cyanogenmod there has been similar issues with some devices and error has been caused by wrong baseband (https://forum.cyanogenmod.org/topic/118507-cant-enable-screen-lock/?page=3), which means that users have not been updating the baseband before updating the latest version of cyanogenmod. This might be the same issue, I used lollipop baseband to get this work.

I created new version based on latest Chinese B10M (previous was B09M):
https://mega.nz/#!1QgxVbza!9S0ugYNp3QmJvPxzNvcb2XB_YCsHygf3NPdohVisSg4
I don't know what kind of changes they have done for this version, but in our A2016 it has the same issues than previous version (security settings force closing etc.).

suunnittelija said:
I created new version based on latest Chinese B10M (previous was B09M):
https://mega.nz/#!1QgxVbza!9S0ugYNp3QmJvPxzNvcb2XB_YCsHygf3NPdohVisSg4
I don't know what kind of changes they have done for this version, but in our A2016 it has the same issues than previous version (security settings force closing etc.).
Click to expand...
Click to collapse
Continue your great work !

How to restore 5.0.1 ?

kacsa105 said:
How to restore 5.0.1 ?
Click to expand...
Click to collapse
Easiest and the best way is to take full twrp backup first before installing this rom. Then it can be restored in twrp and phone is restored to the state it was before.
If backup is not made, then stock B05 update.zip needs to be installed in recovery (in stock or twrp).
@kacsa105 pointed out that adb root method doesn't work anymore with B10M. I didn't notice it because I installed recovery + supe su in right after I installed B10M in twrp.
If you are now in stock Chinese recovery, then follow these steps to restore stock B05 in stock (Chinese) recovery:
1. download B05 from:
http://download.ztedevice.com/UpLoadFiles/product/643/6549/soft/2016042111364202.zip. Unzip it and find update.zip
2. place update.zip to phone internal SD card
3. shut down your phone
4. reboot to recovery: Press and hold Volume up button then Press and hold Power button. When ZTE logo appears, stop pressing Power button but continue pressing Volume up until it goes to recovery.
5. It should be now in stock Chinese recovery. You need to use volume up/down buttons and move it to the selection where is written something on Chinese but with letters SD (which means your internal SD card). Press Power button to select it.
6. Use vol down to navigate until you see update.zip and choose it with power button. If I remember correctly, you need to confirm Yes (it should be in English if I remember it correctly).
7. After it has been updated, recovery asks something again in Chinese. Don't change the selection, just use power button to select what it proposes, and system will boot.
Just wait until your phone boots back to system. If it keeps crashing, just power it down and reboot again to recovery. Recovery should be in English now. Then clear cache and dalvik (or was it factory reset?) and boot to system again.

Google play crashed, when download big data games. Solution pls

Are known any major issues with this ROM? Tired of Mi-sh*t, I'm thinking about install TWRP, make a backup and later this or CM. Is worth it?

hik4ru said:
Are known any major issues with this ROM? Tired of Mi-sh*t, I'm thinking about install TWRP, make a backup and later this or CM. Is worth it?
Click to expand...
Click to collapse
I'm not using this rom because PIN lock screen and fingerprint doesn't work (CM has these issues too). Then it has some China specific in the settings. Be careful when installing this B10 rom, you need to install twrp recovery + root again in recovery right after flashing this rom. Otherwise you will loose root and recovery is replaced by stock Chinese.
On my opinion this is not worth of flashing, you don't even notice major differences. In some devices Marshmallow has improved performance and battery life, but I didn't notice any difference. I'm using stock B06 (5.0.2) with xposed (+some modules installed) and I'm happy with it.
Of course this rom is fun to try if you want to test how Marshmallow will look in our device.

suunnittelija said:
I'm not using this rom because PIN lock screen and fingerprint doesn't work (CM has these issues too). Then it has some China specific in the settings. Be careful when installing this B10 rom, you need to install twrp recovery + root again in recovery right after flashing this rom. Otherwise you will loose root and recovery is replaced by stock Chinese.
On my opinion this is not worth of flashing, you don't even notice major differences. In some devices Marshmallow has improved performance and battery life, but I didn't notice any difference. I'm using stock B06 (5.0.2) with xposed (+some modules installed) and I'm happy with it.
Of course this rom is fun to try if you want to test how Marshmallow will look in our device.
Click to expand...
Click to collapse
How to flash recovery in recovery? I have tried to flash it via ADB, but there was stock recovery after reboot. And when I flash supersu zip the system won't boot.
Odesláno z mého ZTE A2016 pomocí Tapatalk

suunnittelija said:
I'm not using this rom because PIN lock screen and fingerprint doesn't work (CM has these issues too). Then it has some China specific in the settings. Be careful when installing this B10 rom, you need to install twrp recovery + root again in recovery right after flashing this rom. Otherwise you will loose root and recovery is replaced by stock Chinese.
On my opinion this is not worth of flashing, you don't even notice major differences. In some devices Marshmallow has improved performance and battery life, but I didn't notice any difference. I'm using stock B06 (5.0.2) with xposed (+some modules installed) and I'm happy with it.
Of course this rom is fun to try if you want to test how Marshmallow will look in our device.
Click to expand...
Click to collapse
What modules are you using with Xposed?
Enviado desde mi ZTE A2016 mediante Tapatalk

Question Xiaomi.EU 14.0.1.0 TKFMIXM Global

Hello,
I installed the new Global Rom from Xiaomi EU today. Unfortunately, no apps can be downloaded and install via Playstore.
installing a normal apk does not work either.
It looks like the system has no permissions or they are missing. Does anyone know this problem?
Best regards
Philip

ticket can close. only twrp 3.7.0 can install this miui 14 version.

Hi. I tried to install on sweetin by changing the updater script file of this rom. but i can't use it. i tried with orange fox & twrp both. everytime i reboot to system, device works like 10 seconds and then back to recovery. any solution ?

I upgraded to 14.0.1 from 13.0.18
using manual update trick
no problems every thing seems to work fine.
try to update Google play system

I did a clean install of 14.0.1. So far so good.

david003 said:
I did a clean install of 14.0.1. So far so good.
Click to expand...
Click to collapse
I am noticing a large increase in battery consumption with xiaomi.eu 14. Before my battery would drop about 3% while idle about 8 hours sleeping. Now it is 16%.
When I checked battery usage, the bulk was for Android System, but after rebooting the battery usage data seems to have been reset and it's just a flat line.

I also experienced significant issues and even a fresh clean install from TWRP didn't help. I am happy on LineageOS 20 now.

I did another clean install, and after restoring my apps I uninstalled magisk and didn't debloat it, just in case there's an issue there somewhere. After charging it from ~20% to 100%, I used it for awhile. Then for 6 hours of rest, it went from 82% to 80%, so 2% which is about right.
I think the battery may need calibration after the upgrade. I'll probably try to debloat again next. I'm having a lot of issues with magisk lately, though, upgrade or not, so not sure about that.

I installed the update and faced the problem of installing apps from Google Play and apk files
Is there a solution to this problem ?

philip130683 said:
Hello,
I installed the new Global Rom from Xiaomi EU today. Unfortunately, no apps can be downloaded and install via Playstore.
installing a normal apk does not work either.
It looks like the system has no permissions or they are missing. Does anyone know this problem?
Best regards
Philip
Click to expand...
Click to collapse
I encountered the same problem, did you find a solution for it?

AboEslam2022 said:
I encountered the same problem, did you find a solution for it?
Click to expand...
Click to collapse
install with twrp 3.7.0.

AboEslam2022 said:
I encountered the same problem, did you find a solution for it?
Click to expand...
Click to collapse
you need to install PackageInstaller.apk and then proceed to install applications
the app is removed from xiaomi.eu rom
System apps in local ROM are modified with their own translation . If the Package installer is used to update, there are collisions/corruption of the translation and some functions.
Therefore, the package installer was removed from the local ROM.

Ashle said:
you need to install PackageInstaller.apk and then proceed to install applications
the app is removed from xiaomi.eu rom
System apps in local ROM are modified with their own translation . If the Package installer is used to update, there are collisions/corruption of the translation and some functions.
Therefore, the package installer was removed from the local ROM.
Click to expand...
Click to collapse
I faced this problem in the official ROM itself, not only in Eu ROM. Applications could not be installed and an error message appeared that no storage space was available, although there was plenty of space available.

Try it out
Factory reset... on your phone!!!
Wiped cache.. Dalvik cache...

Ashle said:
Try it out
Factory reset... on your phone!!!
Wiped cache.. Dalvik cache..
Click to expand...
Click to collapse
Ok
This is the problem that occurs while installing applications apk files

can you give the link where you downloaded the rom

Ashle said:
can you give the link where you downloaded the rom
Click to expand...
Click to collapse
https://sourceforge.net/projects/xiaomi-eu-multilang-miui-roms/files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv14/xiaomi.eu_multi_HMNote10Pro_V14.0.1.0.TKFMIXM_v14-13.zip/download

in twrp - wipe --internal storage

I don't seem to be having any issues. I dirty flashed over V13.0.16.0.SKFMIXM with TWRP 3.7.0.

Anikur Rahman said:
Hi. I tried to install on sweetin by changing the updater script file of this rom. but i can't use it. i tried with orange fox & twrp both. everytime i reboot to system, device works like 10 seconds and then back to recovery. any solution ?
Click to expand...
Click to collapse
I have the indian version with eu rom 13.0.18.0 also facing the same problem .any solution anyone?