Database Develop

Xposed marshmallow problem

Hello! So, as I'm sure most everyone on XDA knows, xposed for marshmallow was released today! Is anyone else seeing the message in the xposed app "framework is installed but not active"? Also, the log says that it couldn't read the log. I used a root explorer to go to where the log is stored and the folder is empty? Anyone else find a solution? I realize this is the very first public release and it's very rough around the edges right now.
Sent from my Nexus 6

H4X0R46 said:
Hello! So, as I'm sure most everyone on XDA knows, xposed for marshmallow was released today! Is anyone else seeing the message in the xposed app "framework is installed but not active"? Also, the log says that it couldn't read the log. I used a root explorer to go to where the log is stored and the folder is empty? Anyone else find a solution? I realize this is the very first public release and it's very rough around the edges right now.
Sent from my Nexus 6
Click to expand...
Click to collapse
Which version did you install (v76 or v77)? Which Xposed Installer are you using (official or material design)?

Face_Plant said:
Which version did you install (v76 or v77)? Which Xposed Installer are you using (official or material design)?
Click to expand...
Click to collapse
Ver. 76 from the XDA thread! And not material design, didn't even know Ver. 77 and a material design apk was a thing! Different download location? Or am I just blind
Sent from my Nexus 6

H4X0R46 said:
Ver. 76 from the XDA thread! And not material design, didn't even know Ver. 77 and a material design apk was a thing! Different download location? Or am I just blind
Sent from my Nexus 6
Click to expand...
Click to collapse
uninstall v76
install v77 :good:

H4X0R46 said:
Ver. 76 from the XDA thread! And not material design, didn't even know Ver. 77 and a material design apk was a thing! Different download location? Or am I just blind [emoji14]
Sent from my Nexus 6
Click to expand...
Click to collapse
Download v77-sdk23-arm (NOT arm64) from Rovo89's thread stickied to the top of the Xposed section. Do not use the material design installer. It does not work with the new framework. Use v3 alpha 4 (found in the same post as the framework).

Face_Plant said:
Download v77-sdk23-arm (NOT arm64) from Rovo89's thread stickied to the top of the Xposed section. Do not use the material design installer. It does not work with the new framework. Use v3 alpha 4 (found in the same post as the framework).
Click to expand...
Click to collapse
Thanks! I guess version 77 was added after I installed version 76! I just installed it and it's working! Of course my favorite modules need to be updated, but the framework is working correctly! Thanks guys!

Face_Plant said:
Download v77-sdk23-arm (NOT arm64)
Click to expand...
Click to collapse
This is because Marshmallow ties to sdk-v77 and the Snapdragon 805 isn't 64bit, right?

mcstafford said:
This is because Marshmallow ties to sdk-v77 and the Snapdragon 805 isn't 64bit, right?
Click to expand...
Click to collapse
yes. big yes

Please follow the rules before opening a new thread. This was well documented in the xposed main thread.
Thread closed.

Need assistance with installing viper4android

I'm not exactly seeing the straight forward method for nexus 6 compared to Samsung's
I want to easily install viper on Pure nexus 6.0.1 ROM.
Normally its flash the zip install busybox and set kernel to permissive .I dont know where the latest link is to just plain old viper without this Dolby stuff .
Sent from my Nexus 6 using XDA Free mobile app

androidddaaron said:
I'm not exactly seeing the straight forward method for nexus 6 compared to Samsung's
I want to easily install viper on Pure nexus 6.0.1 ROM.
Normally its flash the zip install busybox and set kernel to permissive .I dont know where the latest link is to just plain old viper without this Dolby stuff .
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
get it from the viper thread, in the apps and themes section.

simms22 said:
get it from the viper thread, in the apps and themes section.
Click to expand...
Click to collapse
To be fair, the thread is a bit daunting. I admit I have visited the thread on multiple occasions intending to install it only to back off because I simply don't have the time to do all the research I feel is necessary to install the right version. The only thing I really want is a basic vanilla install that might make my audio a bit louder and customizable, but after reading the first 2 posts a few times, I have no idea what option (or even version [4.7, 4.8, 5.5, etc)] would be best.

androidddaaron said:
I'm not exactly seeing the straight forward method for nexus 6 compared to Samsung's
I want to easily install viper on Pure nexus 6.0.1 ROM.
Normally its flash the zip install busybox and set kernel to permissive .I dont know where the latest link is to just plain old viper without this Dolby stuff .
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
Click this and flash it in TWRP no kernel mod needed assuming you're using the PureNexus default SuperSU.
As of posting that is the most up to date version of vanilla Viper from this thread (Viper Audio app ver 2.4.0.1, zip ver. 5.4)
I personally like the Sony/Beats version because it tweaks the effect configs to sound better imo but to each his own. I do understand the not wanting Dolby though, yea you can use it to make your headphones louder without a DAC but kinda one of those too many cooks in the kitchen things.

[MAGISK][MODULE] OnePlus 3 aptX High Res Audio

THIS IS STILL BETA.
This Magisk module should enable the aptX Bluetooth codec on OnePlus 3(T). It may very well work on other devices with Qualcomm processors. It should work on Nougat but there are reports it may work on Marshmallow, too.
This module is based on the work of @dh.harald and @dr_root. Please see this thread for more info: https://forum.xda-developers.com/oneplus-3/themes/mod-aptx-codec-t3521228
I turned this into a Magisk module so you should benefit from an easy and systemless install.
I lack the proper hardware to test this. Please test and give feedback.
It's free. Hit the THANKS button if you like it.

Anyone test this with a Nexus 6P? I'm tempted to try it myself...
EDIT: Looks like it works with every Snapdragon 8XX and 6XX device but requires you to be on a CAF/CM/Lineage based ROM.

I confirm this works on OnePlus One using LineageOs 14.1. To see if it works, just use Logcat and search for "aptx".

Yes! Perfect!

Massive thanks for this! The module fixes the only flaw I have so far found in this phone.

So I guess it's safe to add it to the repo as well...

Can confirm that this works on OnePlus 3T w/ OOS 4.0.2 - Can see it select aptx codec in logcat. Thanks!
Edit: No longer working on 4.1.0.

Hi, this module seems to be incompatible with Magisk 11.1. Flashed it on my Nexus 6P stock ROM (7.1.1) and it went into bootloop.

kartikb said:
Hi, this module seems to be incompatible with Magisk 11.1. Flashed it on my Nexus 6P stock ROM (7.1.1) and it went into bootloop.
Click to expand...
Click to collapse
More likely it's incompatible with Nexus 6P. See the "Oneplus 3" part in the module name?

Jadelor said:
More likely it's incompatible with Nexus 6P. See the "Oneplus 3" part in the module name?
Click to expand...
Click to collapse
This works on Magisk 10.2 regardless of phone. If you go to it's actual thread, you'll see people have reported this working on other phones apart from OnePlus 3.

kartikb said:
This works on Magisk 10.2 regardless of phone. If you go to it's actual thread, you'll see people have reported this working on other phones apart from OnePlus 3.
Click to expand...
Click to collapse
It only works for phones that OFFICIALLY HAVE SUPPORT and or ARE USING QUALCOMM BLUETOOTH STACK. Sorry for the caps, but after being on that aptX thread and trying to get it on bullhead for three weeks, I don't want people to waste their time doing the same.

This works well, but breaks cts with magisk because it cannot unmount this module when running magiskhide. Logs show everything working except for this module so it causes a cts mismatch

oakley470 said:
This works well, but breaks cts with magisk because it cannot unmount this module when running magiskhide. Logs show everything working except for this module so it causes a cts mismatch
Click to expand...
Click to collapse
Interesting, on my OnePlus One I flashed the standard zip rather than the magisk module and I still pass CTS. I guess for people that can modify /system they should use the regular zip over the magisk module to pass SsfetyNet.
I am on Resurrection Remix (7.1.1) using Boeffla Kernel.

driverdis said:
Interesting, on my OnePlus One I flashed the standard zip rather than the magisk module and I still pass CTS. I guess for people that can modify /system they should use the regular zip over the magisk module to pass SsfetyNet.
I am on Resurrection Remix (7.1.1) using Boeffla Kernel.
Click to expand...
Click to collapse
Which standard zip you are talking about?
Can I have link?
Sent from my A0001 using Tapatalk

ebrijesh said:
Which standard zip you are talking about?
Can I have link?
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Kinda late, but here is the thread link. use the attached "aptXHD.zip" (NOT aptXHD-system.zip, that is for nexus phones)
https://forum.xda-developers.com/oneplus-3/themes/mod-aptx-codec-t3521228
Oneplus One users should use the attached "aptx.zip"
Oneplus Two users should use the attached "aptXHD.zip"
Oneplus 3/3T users should use the attached "aptXHD.zip"
This will allow for CTS pass unlike the Magisk module (which fails CTS due to not being unloaded correctly)

driverdis said:
(NOT aptXHD-system.zip, that is for nexus phones)
https://forum.xda-developers.com/oneplus-3/themes/mod-aptx-codec-t3521228
Click to expand...
Click to collapse
This was exactly what I needed. Cheers.

Tried on OnePlus 3T with Oxygen OS 4.1.6 and Magisk 12 - seems not to be working, though.
Code:
06-16 21:55:13.067 6359 6453 E bt_btif : bta_av_select_codec hdl = 65
06-16 21:55:13.067 6359 6453 I bt_btif_media: btif_a2dp_encoder_init Selected Codec SBC
Any ideas? Or has somebody it working with 4.1.6?

androidfux said:
Tried on OnePlus 3T with Oxygen OS 4.1.6 and Magisk 12 - seems not to be working, though.
Any ideas? Or has somebody it working with 4.1.6?
Click to expand...
Click to collapse
You ever figure this out? Having the same issue.

Hi mates
Why is not the module i the magisk repository?
Thanks
Enviado desde mi A0001 mediante Tapatalk

I think Oneplus already added apt-X in their official ROMs.

Viper4Android 2.5.0.5 Magisk module does not work

I'm trying to install the Viper4Android 2.5.0.5 module in Magisk. I installed the module and the app and then rebooted, but the driver status in Viper4Android under enabled indicates a "no".
I've tried some of the settings, but it does not seem to work. The sound is all the same. Any idea how to get this to work? There were no additional instructions for getting V4A to work.
Nexus 6 running Pure Nexus 7.1.2 with Magisk version 12.0

I've had great success on several different devices with this module: https://forum.xda-developers.com/apps/magisk/module-viper4android-fx-2-5-0-5-t3577058

Didgeridoohan said:
I've had great success on several different devices with this module: https://forum.xda-developers.com/apps/magisk/module-viper4android-fx-2-5-0-5-t3577058
Click to expand...
Click to collapse
I can confirm that the above link works great..

I was hoping I didn't have to use that workaround, but I guess I have no choice. I don't know if anyone will agree with me, but I find it annoying to have to decipher and read through all these guides and forum posts to figure out how to get something to work. I wish things just "worked".

MiuKing said:
I was hoping I didn't have to use that workaround, but I guess I have no choice. I don't know if anyone will agree with me, but I find it annoying to have to decipher and read through all these guides and forum posts to figure out how to get something to work. I wish things just "worked".
Click to expand...
Click to collapse
Everyone has different devices, different setups, etc. It's never going to "just work" easily for everyone. That said, the link above works great and doesn't really have much reading to do....
Only issue I had was it not working initially, but I set the mode to "compatible" instead of "normal" it instantly started working. In case you have issues with it not starting like I did.

Hello, I have a OnePlus 3T (Oreo - 8.0.0 - OxygenOS Open 20 ) I was in the big sh*t installing this app but now it's working so what I do ?
I simply install 4/5 things :
- Viper4Android APK here ( http://www.mediafire.com/file/xonl4jha2e4vez1/ViPER4Android_FX_v2505.zip )
- BusyBox you can get it on the Play Store
- This Magisk module for OP3T but if you have an other phone search an other compatible module ( https://androidfilehost.com/?fid=673368273298977808 )
- The SELinux Switch [IMPORTANT] ( https://forum.xda-developers.com/devdb/project/?id=22073#downloads )
UNINSTALL ALL PREVIOUS VERSIONS OF V4A ON YOUR DEVICE.
Now I'm gona show you how to get this sh*t working
Simply install unzip the Viper4Android folder and install this apk :
ViPER4Android_FX_v2505_A7.x_Nougat_IO_test_fix.apk
(Maybe a newer version can be delivered in the future I think you can install it).
Then install BusyBox.
Open V4A and install the Drivers.
When it's done go to Magisk -> Modules -> + and install the zip module for your device.
/!\REBOOT /!\
Finally you just have to install The SELinux Switch.apk and switch your SELinux to Permissive (maybe you have to reboot but for me when I reboot my SELinux go back to Enforcing SELinux so I switch it back when I reboot).
[Note : I don't know if it's important but I was flashing a zip of V4A that's install me V4A as a system app and it wasn't working (error I/O) this is not important but it maybe install me other files so maybe you have to do this if it's not working at the end].
V4A is working now (don't forget to switch off your stock equalizer in Settings -> Sound -> Balance)
If you have any problem or questions contact me.

Franck7519 said:
Hello, I have a OnePlus 3T (Oreo - 8.0.0 - OxygenOS Open 20 ) I was in the big sh*t installing this app but now it's working so what I do ?
I simply install 4/5 things :
Click to expand...
Click to collapse
My dude, you are doing way more then you have to. Just install Ahrions magisk viper module. It has all the patches for OOS Oreo to work (it seems OnePlus made it impossible for viper to work on Enforcing with their Oreo release -.-)
Sent from my LG Nexus 5X using XDA Labs

Skittles9823 said:
My dude, you are doing way more then you have to. Just install Ahrions magisk viper module. It has all the patches for OOS Oreo to work (it seems OnePlus made it impossible for viper to work on Enforcing with their Oreo release -.-)
Click to expand...
Click to collapse
No because V4A is not working when SELinux is on enforcing bru this is why I install the switcher and it's working but if a problem comes I will test with your module.

Franck7519 said:
No because V4A is not working when SELinux is on enforcing bru this is why I install the switcher and it's working but if a problem comes I will test with your module.
Click to expand...
Click to collapse
The module I suggested automatically sets permissive on boot for OOS devices.
Sent from my LG Nexus 5X using XDA Labs

Skittles9823 said:
The module I suggested automatically sets permissive on boot for OOS devices.
Click to expand...
Click to collapse
It's better than my method yet I'm agree but I don't find your module can you send me a link ?

Franck7519 said:
It's better than my method yet I'm agree but I don't find your module can you send me a link ?
Click to expand...
Click to collapse
Look at the previous link in this thread. That's the one (it requires Magisk 15+ to work).
Sent from my LG Nexus 5X using XDA Labs

Skittles9823 said:
Look at the previous link in this thread. That's the one (it requires Magisk 15+ to work).
Click to expand...
Click to collapse
Ok thanks bru

[GUIDE] How to Pass SafetyNet on Android 7.1.2_r17 AOSP ROM

Hi all,
We have always seen the issues in passing the SafetyNet in the AOSP ROM of Santhosh M. Today, I read the guide and heard about the new magisk v13 beta is available and allows the users to pass the SafetyNet. I couldn't stop myself trying it on my phone.
I am using Nexus 5 AOSP ROM by Santhosh M and tried it on my device the latest zip file and installed it on my device.
Make sure if you are having Magisk v 5.0.2
Downloads:
Download Magisk V13 Beta
Magisk Manager 5.0.2 Apk
Installation Instructions:
Download Magisk v13 and Magisk manager on your device
Reboot your phone into recovery
Install the zip file on your device
Reboot your phone and check the magisk manager application
You will see safetyNet is getting passed.
Troubleshooting
If you have activated magisk core features then please turn it off and try again.
If you have installedmagisk after SUPERSU then please flash this zip file on your device before flashing magisk to completely remove SuperSU files.
Verdict
If you still have any issues please feel free to shoot your query

I'm guessing this only works on 7.1.2?

Tried it on stock 6.0.1..failed of course

Strangely I can pass SafetyNet now though

shad876 said:
Strangely I can pass SafetyNet now though
Click to expand...
Click to collapse
Yeahhh! Happy to hear that one
Sent from my hammerhead using XDA Labs

Strange, you wrote about v 13 magisk but your screenshots with v12.
And my result is "incorrect answer"
Отправлено с моего Nexus 5 через Tapatalk

Gapps
Xaif said:
Hi all,
We have always seen the issues in passing the SafetyNet in the AOSP ROM of Santhosh M. Today, I read the guide and heard about the new magisk v13 beta is available and allows the users to pass the SafetyNet. I couldn't stop myself trying it on my phone.
I am using Nexus 5 AOSP ROM by Santhosh M and tried it on my device the latest zip file and installed it on my device.
Make sure if you are having Magisk v 5.0.2
Downloads:
Download Magisk V13 Beta
Magisk Manager 5.0.2 Apk
Installation Instructions:
Download Magisk v13 and Magisk manager on your device
Reboot your phone into recovery
Install the zip file on your device
Reboot your phone and check the magisk manager application
You will see safetyNet is getting passed.
Troubleshooting
If you have activated magisk core features then please turn it off and try again.
If you have installedmagisk after SUPERSU then please flash this zip file on your device before flashing magisk to completely remove SuperSU files.
Verdict
If you still have any issues please feel free to shoot your query
Click to expand...
Click to collapse
What Gapps you use in you phone? I did all what you write, but I have error same as ArDark

npu.gh0st said:
What Gapps you use in you phone? I did all what you write, but I have error same as ArDark
Click to expand...
Click to collapse
I have used Pico Gapps and download the files which are provided in the OP. Make sure you uninstall the previous SuperSU and remove all the files of it.
Sent from my Google Nexus 5 using XDA Labs

Xaif said:
I have used Pico Gapps and download the files which are provided in the OP. Make sure you uninstall the previous SuperSU and remove all the files of it.
Sent from my Google Nexus 5 using XDA Labs
Click to expand...
Click to collapse
I used a clean AOSP installation [7.1.2_r17] By Santhosh M + last Gapps nano + pixel launcher + pixel sound + magisk.
Maybe You are using not original kernel?

npu.gh0st said:
I used a clean AOSP installation [7.1.2_r17] By Santhosh M + last Gapps nano + pixel launcher + pixel sound + magisk.
Maybe You are using not original kernel?
Click to expand...
Click to collapse
I am using Blu_spark_r129 kernel.
Sent from my Google Nexus 5 using XDA Labs

can't
error- The response is invalid

ydv21yash said:
can't
error- The response is invalid
Click to expand...
Click to collapse
In the Magisk Manager site there is a zip file you can download it from there
Sent from my Google Nexus 5 using XDA Labs

Xaif said:
In the Magisk Manager site there is a zip file you can download it from there
Sent from my Google Nexus 5 using XDA Labs
Click to expand...
Click to collapse
already flash your file..safety net not passed..
gives error - the response is invalid
https://image.ibb.co/jR0SYQ/Screenshot_26_Jun_2017_1_20_28_AM.png

Hello,
I installed bluspark kernel (and it's very smooth now!).
Now I have :
ctsProfile: false
basicIntegrity: true
I don't know what can be the problem...

ydv21yash said:
already flash your file..safety net not passed..
gives error - the response is invalid
https://image.ibb.co/jR0SYQ/Screenshot_26_Jun_2017_1_20_28_AM.png
Click to expand...
Click to collapse
Turn on your internet connection to check SafetyNet
Sent from my Google Nexus 5 using XDA Labs

youl_junior said:
Hello,
I installed bluspark kernel (and it's very smooth now!).
Now I have :
ctsProfile: false
basicIntegrity: true
I don't know what can be the problem...
Click to expand...
Click to collapse
Make sure that you disable the core feature and check the SafetyNet.
Sent from my Google Nexus 5 using XDA Labs

Xaif said:
Make sure that you disable the core feature and check the SafetyNet.
Sent from my Google Nexus 5 using XDA Labs
Click to expand...
Click to collapse
I tried to use "core-only" feature, but then both tests failed.
Then I installed the magisk module "safetynet fix" and now it works !
BTW, it was only for the challenge, I don't need safety check pass, because I don't play Pokemon GO, and I don't have Android Pay in France for now.

youl_junior said:
I tried to use "core-only" feature, but then both tests failed.
Then I installed the magisk module "safetynet fix" and now it works !
BTW, it was only for the challenge, I don't need safety check pass, because I don't play Pokemon GO, and I don't have Android Pay in France for now.
Click to expand...
Click to collapse
In India most of the Financial applications doesn't works if we are having rooted Android phone.
Sent from my Google Nexus 5 using XDA Labs

I pass SafetyNet on 7.1.2_r17 AOSP ROM by Santhosh on blu_spark r129 kernel with Magisk v12, Magisk Hide enabled and the safetynet fix module installed.

Xaif said:
Turn on your internet connection to check SafetyNet
Sent from my Google Nexus 5 using XDA Labs
Click to expand...
Click to collapse
Brother its definately On while i checking saferyNet..but its not working