I messed up my firmware and it is now NRD90M Test-Keys. I downloaded the stock firmware and try to flash it using the power+volume up+volume down method with no luck. I hope someone can get me help. Thanks
Phone:Huawei P9 L19-C636
Firmware that i am installing: HUAWEI P9 Firmware (EVA-L19, Android 6.0, EMUI 4.1.1, C636B190, Asia)
first try to flash this here click from huawei, rolback package, im just guesing you tried to instal nuget, thats why you got wrong device name
Just to finish off--as Arnys said above, download and flash that rollback package and THEN flash your C636B190 firmware.
Hello Guys,
It's now possible to downgrade P10 Plus from Oreo to Nougat
Disclaimer: I'm not responsible what happens to your device or if you active some nuclear missiles in the process
Prerequisites:
Oreo Firmware on your P10 Plus
Nougat Firmware for P10 Plus
HWOTA 8 from mankindttw https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
Rename the files according to this guide:
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
Access to fastboot and adb
Downgrade Nougat
A. Put update.zip, update_data_public.zip, and update_all_hw.zip files into HWOTA8 repack directory.
B. Run repack.bat to update zip files.
C. Go through "Flash Update" steps and use repacked zip files.
D. Enter recovery and do factory reset.
Flash Update
A. Use Vol-Dn + USB Cable to boot into fastboot mode.
B. Use Replace_Recovery.bat in HWOTA8 to flash TWRP recovery.
C. Disconnect USB cable, use Vol-Up + Power to boot into TWRP.
D. Create "HWOTA8" directory in MTP sdcard.
E. Put hwota8_update.zip, MHA_RECOVERY8_NoCheck.img, and three huawei update package (update.zip, update_data_public.zip, and update_all_hw.zip) files into "HWOTA8" directory.
F. TWRP install sdcard hwota8_update.zip, it will reboot and install update automatically.
Hi!
I got this message when I flash the repacked (L29C432B164) zips with HWOTA8: "Software install failed! - Failed to check the update files. - Please download the package again."
Whats wrong? I've followed these steps, but it failed.
When I put Oreo .311 zips without repacking, but renamed (tutorial) in the HWOTA8 directory on my sdcard and install [hwota8_update.zip] with twrp it installs normal incl. verify BUT there is no change. Everthing is like before.
On my P10 (normal), after a factory reset with .311 it's now on build no. 8.0.0.046(01BN).
I cant downgrade to nougat or update back to .311
What can I do? Any suggestions?
Downgrade work only with rollback firmware like B217
Gesendet von meinem VKY-AL00 mit Tapatalk
Ok, than I have to wait or is there another way to leave the 8.0.0.046(01BN)?
There is a rollback firmware on firmware finder.
Gesendet von meinem VKY-AL00 mit Tapatalk
Do I need to install the rollback with firmware finder, manually flashing the zips with twrp or with HWOTA?
Install the rollback firmware via proxy in FF
Oiphobie said:
Ok, than I have to wait or is there another way to leave the 8.0.0.046(01BN)?
Click to expand...
Click to collapse
can i know why you want to roll back to nougat from oreo ? are there bugs or something ?
How to fix error 9 ? check_write_data_to_pattion, write data error ?
Rommco05 said:
Can I only use rollback packages? Because this firmware contains only 2 zip files for L29. You personaly tested this way, I never use hwota hopefuly I dont brick my phone
Click to expand...
Click to collapse
I have done it only with rollback b217 and I think yes you need rollback packages
if i remove public with notepad, i get an error, if i don't remove it, install fail, any help
Source of firmware
may i ask where you got the firmwares
i get the rollback from FF, there is no other rolllback firmware for vtr-l29c636.
trigos9421 said:
i get the rollback from FF, there is no other rolllback firmware for vtr-l29c636.
Click to expand...
Click to collapse
Vtr is not vky therefore it's P10 not P10 Plus
Why I cant repack ?
Downgrade Nougat
A. Put update.zip, update_data_public.zip, and update_all_hw.zip files into HWOTA8 repack directory.
B. Run repack.bat to update zip files.
C. Go through "Flash Update" steps and use repacked zip files.
I run "repack.bat" from Windows 7 it says the 7zip.exe are not compactible, any suggestions ?
How the repacked zip files loock like? I have downloaded the C432 Roolback firmware from Firmware Finder, must I repack them to ?
Rommco05 said:
Rollback contains 3 zips, I think just 2
Click to expand...
Click to collapse
You didnt answer me on my Question
Becouse a lot of user dont understand and get confused I have made a new tutorial for Rollback from Oreo B321 C636 P10 plus, to Nougat VKY-L29 C432 B181 or other region like C185 or C636
BE CARREFULL AND READ THIS - Do exactly like this description and you will not fail
If you read 2 files , dont aske "can I use 3 files" , becouse there is writen 2 files
Also dont aske can I use "this" or "this" becouse you can only use this what is written and than you have no error.
For Rollback from Oreo B321 C636 P10 plus, to Nougat VKY-L29 C432 B181 or other region
like C185 or C636
What you need:
Access to fastboot and adb or Minimal ADB and Fastboot installed on computer( in root C: )
HWOTA8 from mankindttw https://forum.xda-developers.com/mat...ckage-t3699522
Nougat Rollback Firmware for P10 Plus
I used this firmware becouse I have a 432 model:
VKY-L29C432B181 ( its a rollback for C432 on FirmwareFinder ) only 2 zips or
VKY-L29C432B185 ( its a new rollback for C432 on FirmwareFinder will lock bootloader ) only 2 zips
update_full_VKY-L29_hw_eu.zip and update.zip
Extract the downloaded HWOTA8_2017110501.zip to C: on Computer
Now Create "HWOTA8" folder in EXTERNAL sdcard, in this folder put only
from the extracted HWOTA8_2017110501.zip this 1 file:
MHA_RECOVERY8_NoCheck.img
also this 2 files from downloaded firmware:
update.zip - dont rename
update_full_VKY-L29_hw_eu.zip - rename to - update_all_hw.zip
for VKY-L09 instead of update_full_VKY-L29_hw_eu.zip you download the update_full_VKY-L09_hw_eu.zip and rename as abow described
and this moded - hwota8_update2.zip ( downloaded here as atached file )
It is moded so you need only 2 firmware files for Rollback and NO need to Run repack.bat to update zip files.
SO LETS GO
ON PHONE Use Vol-Dn + USB Cable to boot into fastboot mode.
flash TWRP8_3.0.3.img > comand: fastboot flash recovery_ramdisk TWRP8_3.0.3.img
we use this TWRP becouse it is in HWOTA8 ectracted folder
Boot into TWRP and install from external sdcard hwota8_update2.zip, it will reboot and install update automatically.
After reboot you have Nougat B181 or B185 ( depend what you chose ) on VKY-L29C432
Thats How I did it in 15 minutes
Yes If you have another model not C432 you must download the 2 firmware files for your model region
I'm not responsible for any bricks.
If you fail you didnt follow exatly the tutorial
Reading is the Mother of Knowlege.
Woow Great Thank you
Like This Video
MHA_RECOVERY8_NoCheck.img file is fo Mate 9. It is the reason of my hard bricked Mate 9 Pro. It even doesn't support Mate 9 Pro; how can you think that it will fix your case?
Just try rollback otherwise wait for Official release of Oreo.
This worked fine for me,it took just over 10 mins and I'm back on nougat. I'd previously been on stock Oreo (rooted) and treble (I have a p10 plus VKYL29)
Hello Guys,
I had installed a costum rom on my Huawei P9, but now I want to install stock EMUI.
I unlocked my bootloader
Intalled TWRP and flash custom rom...
Now I tried flash stock rom via dload but it does not work
If I want to flash the UPDATE.APP from the official Huawei Support (Android 6.0, EMUI 4.1.1, C432B182 Western Europe) appears a failure while flashing Cust.img and while flashing System.img, why?
Then I unzip UPDATE.APP via Huawei Update Extractor and flashed Boot.img, Recovery.img, System.img via fastboot mode (Cust.img was not found in the UPDATE.APP) (Firmware Finder a Full OTA EVA-L09C432B393)
And now what should I do, my P9 does not boot?
Did I forgot something?
Hope you can help me
I would say you have to rollback to MM with the official downgrade package then with dload burn a full MM ROM if you get the full B136 then you can run the updates... Or try a full b182
Enviado desde mi EVA-L09 mediante Tapatalk
Hi guys. A while back I bricked my la1 and found a lx1 rescue box (which worked). However I would like to update it to emui 8 single sim for the la1 and can't because of my oeminfo being for lx1. I have the update.app for the new firmware and have installed honor 8 oeminfo (PRA-LA1) on my Huawei (PRA-LA1). Not sure what I should flash from the update.app as there are different img files from the usual recovery, boot, cust etc.
yuvaanraj said:
Hi guys. A while back I bricked my la1 and found a lx1 rescue box (which worked). However I would like to update it to emui 8 single sim for the la1 and can't because of my oeminfo being for lx1. I have the update.app for the new firmware and have installed honor 8 oeminfo (PRA-LA1) on my Huawei (PRA-LA1). Not sure what I should flash from the update.app as there are different img files from the usual recovery, boot, cust etc.
Click to expand...
Click to collapse
You can't update to a newer version of Android using the update.app... the device will refuse the package and it will fail ...you have to wait until the OTA update arrives.
Sent from my PRA-LA1 using Tapatalk
yuvaanraj said:
Hi guys. A while back I bricked my la1 and found a lx1 rescue box (which worked). However I would like to update it to emui 8 single sim for the la1 and can't because of my oeminfo being for lx1. I have the update.app for the new firmware and have installed honor 8 oeminfo (PRA-LA1) on my Huawei (PRA-LA1). Not sure what I should flash from the update.app as there are different img files from the usual recovery, boot, cust etc.
Click to expand...
Click to collapse
http://www.haky86.me/2018/04/install-emui-80-beta-on-huawei-p8-lite.html
In the searching for an EMUI5 firmware I have stumbled upon an EMUI8 one that my phone can have installed, I got this from the Firmware Finder:
Code:
Firmware approved for install
Build: PRA-LX3 8.0.0.360(C605)
Also there are other that says FULLOTA-MF-PV, FULLOTA-MF or just FULLOTA, which one should I use?
Now, in Multi-Tool I have an option to "Unbrick" the phone by flashing several images, can I use that to also flash a new firmware, in this case EMUI8? Though I haven't found a boot.img file when I extracted the update.app file. Even if I shouldn't use Multi-Tool can I extract the update file with Huawei Extractor and then flash everything with fastboot commands?
I can't access erecovery because in the past I have flashed something there (that's why I was looking for a EMUI5 firmware, so I could restore the stock recovery), I can only access fastboot&rescue mode, when I tried updating the OS from the phone itself (I had an update that said it includes May 2018 security patches) it rebooted to an error message. I have everything unlocked in this phone.