Related
Just flashed cm-13.0-20151114-UNOFFICIAL-titan.zip on my XT1068 and that boots OK, I can also call and data seems to work.
If I install open_gapps-arm-6.0-pico-20151118.zip after reboot there's only the message "Unfortunately, Setup Wizard has stopped" and I can't continue...
Any clues?
flash slim zero gapps
https://www.androidfilehost.com/?fid=24269982086998389
daywalk3r666 said:
flash slim zero gapps
https://www.androidfilehost.com/?fid=24269982086998389
Click to expand...
Click to collapse
First updated to 20151117 which didn't change anything
Then
Factory reset
Install 20151117
Install Slim Zero GApps
Which resulted in the original message
Code:
Unfortunately, Setup Wizard has stopped
and now alternated with message
Code:
Unfortunately, Google Play Services has stopped
showing very briefly (could've been there before as well
spiloss said:
First updated to 20151117 which didn't change anything
Then
Factory reset
Install 20151117
Install Slim Zero GApps
Which resulted in the original message
Code:
Unfortunately, Setup Wizard has stopped
and now alternated with message
Code:
Unfortunately, Google Play Services has stopped
showing very briefly (could've been there before as well
Click to expand...
Click to collapse
After
* Factory reset
* Install 20151117
the FC of Setup Wizard just comes back. Anything else I need to do to remove GApps when flashing?
spiloss said:
Just flashed cm-13.0-20151114-UNOFFICIAL-titan.zip on my XT1068 and that boots OK, I can also call and data seems to work.
If I install open_gapps-arm-6.0-pico-20151118.zip after reboot there's only the message "Unfortunately, Setup Wizard has stopped" and I can't continue...
Any clues?
Click to expand...
Click to collapse
Why did you make a new thread instead of asking in the main CM13 unofficial thread?
Ragarianok said:
Why did you make a new thread instead of asking in the main CM13 unofficial thread?
Click to expand...
Click to collapse
Sorry for the n00bness! Will close and add the Q to the unofficial thread!
[FIX] Setup Wizard Stopped Working
1. After Flashing gapps go lock the screen
2.Unlock screen and drag setting from above it selt
3. You will get notification "Unfortuantlley stopped" click ok in while of gap slide down (repeat it till you find apps)
4. open apps and click on three dot menu and click show system apps
5.go to last scroll down you will find Setup Wizard with Cm Logo and with CM Logo
6. Select with one without CM Logo and give permissions
7. Done Enjoy!!!!!
HostZero said:
1. After Flashing gapps go lock the screen
2.Unlock screen and drag setting from above it selt
3. You will get notification "Unfortuantlley stopped" click ok in while of gap slide down (repeat it till you find apps)
4. open apps and click on three dot menu and click show system apps
5.go to last scroll down you will find Setup Wizard with Cm Logo and with CM Logo
6. Select with one without CM Logo and give permissions
7. Done Enjoy!!!!!
Click to expand...
Click to collapse
When I try to give the permissions, android says "Screen overlay detected- To change this permission setting you first have to turn off the screen overlay from Settings > Apps".
Can't continue...
Yesterday just got the same issue.
Wipe dalvik, cache, system ( but dont touch internal storage)
Install - choose CM zip, add another package - add OpenGapps Pico - flash - reboot. Voila.
Be sure to skip cache/dalvik wipe and just reboot
Hi,
I changed the software of my Mi Mix 6 months ago to lineage os - after the change of the os, the sound was not running properly anymore. In the forum someone did help me out with software for a firmware update. Now I updated on Lineage os 15.1 and the soundproblems are there again. Can someone tell me, if I have to update the firmware again, respectively where I can find the relevant software. Thanks for helping!
H0707 said:
Hi,
I changed the software of my Mi Mix 6 months ago to lineage os - after the change of the os, the sound was not running properly anymore. In the forum someone did help me out with software for a firmware update. Now I updated on Lineage os 15.1 and the soundproblems are there again. Can someone tell me, if I have to update the firmware again, respectively where I can find the relevant software. Thanks for helping!
Click to expand...
Click to collapse
how people gonna help you if you're not describing your problem with more details.
what is exactly the sound problem.
heindrix said:
how people gonna help you if you're not describing your problem with more details.
what is exactly the sound problem.
Click to expand...
Click to collapse
I am sorry - I have been not very precise. The sound itself is still working. But my device especially has problems to connect to myBluetooth Speaker. Maybe thats more a connection issue. There are further a bunch of small problems, I cannot explain. For example - I cannot download maps of different regions in my map app anymore. As well - I am using the yalp store to download certain apps I need - downloads or updates are not possible anymore. Half a year ago someone gave me this link for firmware updates: https://mega.nz/#F!zlJBQJhJ!BJuv0brw0doTafuLTXJATw Is it useful to update the firmware on a newer version?
Best
First you do not need to use a firmware for LoS 15.1, just the latest nightly which is here: https://download.lineageos.org/lithium
*Second.... Do NOT use any app store beside Google Play. Because it may cause problems to your phone. Use Google Play only... Any the apps can harm your device.... I would suggest to do a full wipe on the advance wipe option in TWRP... That means everything except for USB OTG.. Make sure you are done... Make sure all data partitions (DATA, Caches) is on EXT 4 before installing. See the info below near the photo.
If your phone still have problems.....I would suggest go back to Stock Firmware by using Mi Flash (make sure you click "Clean All" without locking your phone on the bottom right of Mi-Flash) when you boot your phone to to **bootloader**. You can use Mi Flash and flash the current Global Stable or Global Developer for the Mi Mix which is on en.miui.com/a-234.html then check to see if the problem still happens on either firmwares. If there is no problem, then by all means go back to LoS 15.1. The Miui Rom Flashing tool link is right above the list of the Miui Rom Version. And again i warn you before flashing the stock firmware to click the "Clean All" only.. not "Clean All and Lock" because it will lock your bootloader. Then after your done, check for any problems.. If the phone is ok.. Then go back to LoS 15.1 to determine if these problems still happen.. If it works fine.. Then you know why your phone had problems in the first place.
The photo is for you to see what to wipe when doing a clean installation of LoS 15.1.. Wipe all except for the USB OTG before flashing anything. Repair and Change system file is to check to see if all of your partitions is on EXT 4. Just to make sure you have no errors of any kind before installing.
H0707 said:
I am sorry - I have been not very precise. The sound itself is still working. But my device especially has problems to connect to myBluetooth Speaker. Maybe thats more a connection issue. There are further a bunch of small problems, I cannot explain. For example - I cannot download maps of different regions in my map app anymore. As well - I am using the yalp store to download certain apps I need - downloads or updates are not possible anymore. Half a year ago someone gave me this link for firmware updates: https://mega.nz/#F!zlJBQJhJ!BJuv0brw0doTafuLTXJATw Is it useful to update the firmware on a newer version?
Best
Click to expand...
Click to collapse
download and flash the latest firmware i cooked from my google drive : https://drive.google.com/drive/mobile/folders/1PGmzEcmgG0XhRB7110CDDTgMwmw4N3MM
if the issue still there, it's not firmware problem, maybe it's the ROM problem.
you can try CrDroid : https://forum.xda-developers.com/mi-mix/development/rom-crdroid-t3758726
or AICP : https://forum.xda-developers.com/mi-mix/development/rom-aicp-13-1-t3746648
or Resurrection Remix : https://forum.xda-developers.com/mi-mix/development/rom-resurrection-remix-t3751314
heindrix said:
download and flash the latest firmware i cooked from my google drive : https://drive.google.com/drive/mobile/folders/1PGmzEcmgG0XhRB7110CDDTgMwmw4N3MM
if the issue still there, it's not firmware problem, maybe it's the ROM problem.
you can try CrDroid : https://forum.xda-developers.com/mi-mix/development/rom-crdroid-t3758726
or AICP : https://forum.xda-developers.com/mi-mix/development/rom-aicp-13-1-t3746648
or Resurrection Remix : https://forum.xda-developers.com/mi-mix/development/rom-resurrection-remix-t3751314
Click to expand...
Click to collapse
Thanks a lot for your extensive response.
One thing - out of some reason I cannot start TWRP manually (maybe cause I encrypted my hard-drive). I only can start it using adb. Once, my recovery is started, I can not connect to the phones hard-drive via my computer anymore. Am I not deleting the complete hard-drive plus OS, when I am performing an extended wipe - as you are suggesting. My problem is, that I am afraid, that I am not able to install a new OS after a wipe (since I will delete all data stored on the hard-drive and to enter my hard-drive again, I would have to start the phone...).
Ps. I never heard that it might cause problems to install apps from apps like the yalp store. Since I am not interested to have all the google surveillance software on my phone, using a costum rom without gapps seemed a good way for me till now.
H0707 said:
Thanks a lot for your extensive response.
One thing - out of some reason I cannot start TWRP manually (maybe cause I encrypted my hard-drive). I only can start it using adb. Once, my recovery is started, I can not connect to the phones hard-drive via my computer anymore. Am I not deleting the complete hard-drive plus OS, when I am performing an extended wipe - as you are suggesting. My problem is, that I am afraid, that I am not able to install a new OS after a wipe (since I will delete all data stored on the hard-drive and to enter my hard-drive again, I would have to start the phone...).
Ps. I never heard that it might cause problems to install apps from apps like the yalp store. Since I am not interested to have all the google surveillance software on my phone, using a costum rom without gapps seemed a good way for me till now.
Click to expand...
Click to collapse
Something weird happened - TWRP is not accepting my password anymore at the start. Thats strange cause my password is accepted, when I start the phone. Bad development
H0707 said:
Something weird happened - TWRP is not accepting my password anymore at the start. Thats strange cause my password is accepted, when I start the phone. Bad development
Click to expand...
Click to collapse
sorry for judging, but reading your details, i suppose you haven't learn a lot about customizing device.
if this suggestion didn't help you, i don't know anymore what will.
Flash TWRP (twrp-3.2.1-raupe-blunden-15.1-updated.img) -> Boot into TWRP -> Swipe to Allow Modifications -> Cancel when TWRP asks for password -> Go To Wipe -> Press Format Data button and type YES and press enter -> Go To Wipe -> Press Advanced Wipe button -> Select all partitions except USB OTG and swipe to wipe -> Go to Mount -> Press Select Storage button and choose Internal Storage and press OK -> Press Mount USB Storage button -> Plug phone to PC -> Copy all files you want to flash from PC -> Unmount and unplug from PC -> Go to Mount -> Mount all partitions except USB OTG -> Flash files you want to flash
heindrix said:
sorry for judging, but reading your details, i suppose you haven't learn a lot about customizing device.
if this suggestion didn't help you, i don't know anymore what will.
Flash TWRP (twrp-3.2.1-raupe-blunden-15.1-updated.img) -> Boot into TWRP -> Swipe to Allow Modifications -> Cancel when TWRP asks for password -> Go To Wipe -> Press Format Data button and type YES and press enter -> Go To Wipe -> Press Advanced Wipe button -> Select all partitions except USB OTG and swipe to wipe -> Go to Mount -> Press Select Storage button and choose Internal Storage and press OK -> Press Mount USB Storage button -> Plug phone to PC -> Copy all files you want to flash from PC -> Unmount and unplug from PC -> Go to Mount -> Mount all partitions except USB OTG -> Flash files you want to flash
Click to expand...
Click to collapse
Dear Hendrix, I am not a pro just an interested person trying to emancipate myself dealing with smartphonetechnology. Thanks a lot for your guideline. I will try your advice as soon as I find the time. Will let you know, if everything worked out! Best wishes
For what it's worth, flashing the firmware provided by hendrix fixed my lineageos 15.1 problems.
I recently moved into LineageOS coming from latest MIUI 10 by Xiaomi.eu. Initially everything worked fine except for sound when playing media files (notification sound works). The firmware flash fixed everything.
heindrix said:
sorry for judging, but reading your details, i suppose you haven't learn a lot about customizing device.
if this suggestion didn't help you, i don't know anymore what will.
Flash TWRP (twrp-3.2.1-raupe-blunden-15.1-updated.img) -> Boot into TWRP -> Swipe to Allow Modifications -> Cancel when TWRP asks for password -> Go To Wipe -> Press Format Data button and type YES and press enter -> Go To Wipe -> Press Advanced Wipe button -> Select all partitions except USB OTG and swipe to wipe -> Go to Mount -> Press Select Storage button and choose Internal Storage and press OK -> Press Mount USB Storage button -> Plug phone to PC -> Copy all files you want to flash from PC -> Unmount and unplug from PC -> Go to Mount -> Mount all partitions except USB OTG -> Flash files you want to flash
Click to expand...
Click to collapse
Dear Hendrix,
everything worked fine - the device feels like new - thanks!
If you have questions on cultural sciences (am holding a PHD in this area) you can always ask me - I for sure will not start judging you in your unprofessional first moves
H0707 said:
Dear Hendrix,
everything worked fine - the device feels like new - thanks!
If you have questions on cultural sciences (am holding a PHD in this area) you can always ask me - I for sure will not start judging you in your unprofessional first moves
Click to expand...
Click to collapse
Me too, Phone itself worked great, had NO sound from Google Assistant, no sound from headphones, no sound from speakers, but did have ring/notifications and some sound. Video was laggy and intermittent on youtube and the net..... I tried many different Roms, Many newer firmwares and the ONLY ONLY thing that worked was the suggestion to try firmware 8.1.4
After that all is working great...…………..
garythompson said:
Me too, Phone itself worked great, had NO sound from Google Assistant, no sound from headphones, no sound from speakers, but did have ring/notifications and some sound. Video was laggy and intermittent on youtube and the net..... I tried many different Roms, Many newer firmwares and the ONLY ONLY thing that worked was the suggestion to try firmware 8.1.4
After that all is working great...…………..
Click to expand...
Click to collapse
Some users said that there are problems on firmware more than 8.8.2 version, 8.8.2 still works fine. but i don't know if it will works for you too.
Greetings everyone, i go by the name Ainz Ooal Gown. Here i bring you the a guide to flash GSI roms to your V40
Fist things first if you try this and end up with a brick or your device transforms and tries to take over the world; it's not my fault you messed up not me. So just read all of this thread not just the O.P to, and get out of a bind if you reply with "the thread is too long i wont read it please help" don't expect anything short of "there's a search bar use it"
Requirements
Unlocked bootloader
TWRP
Installation guide:
You need to download Lineage OS 16 by Xsavi i recommend the build "lineage-16.0-20190914-UNOFFICIAL-judypn(More LG Stuff use this).zip". Put into your external SD
You need to download a GSI from here https://forum.xda-developers.com/project-treble/trebleenabled-device-development i personally recommend Havoc OS 2.9 and Resurrection Remix 7.0 download the Arm 64 A/B Variant and what ever recommended Gapps Package is linked.
Extract the GSI you downloaded and copy the extracted Folder into your external SD.
Boot into TWRP and check your active Slot in the reboot menu.
Flash LOS 16 Install -> select the ROM zip -> tick Inject TWRP -> Swipe for install (if you're on a, it will be installed to b, and vice versa).
Go to and select Reboot Menu -> select your inactive slot -> select recovery and you should reboot into your inactive slot.
Go to and select Wipe Menu -> Swipe to factory reset
Select install and navigate to your downloaded GSI -> select install image -> select the GSI image -> select the bubble next to "System Image" -> Swipe to Custom Flash.
Select the wipe menu -> select advanced wipe -> select the square next to "System" -> select "Repair or Change File System" -> select Resize File System -> Swipe to Resize.
Install any Gapps and/or Magisk and reboot.
You will probably have to add your Carriers APN settings for Data and MMS to work.
Thanks to: @SGCMarkus @Xsavi
Ainz_Ooal_Gown said:
Hello here i will be uploading the instructions for running GSI Treble Oreo and Pie roms.
At the moment i'm making sure everything is working before i upload those instructions and links please be patient last thing i want to do is make you device a fancy brick.
Click to expand...
Click to collapse
Hello!
Maybe you have a dump system or stock firmware for twrp?
Or maybe there is an instruction for unpacking the kdz firmware
scrubber said:
Hello!
Maybe you have a dump system or stock firmware for twrp?
Or maybe there is an instruction for unpacking the kdz firmware
Click to expand...
Click to collapse
GSI would be without KDZ...
Ainz_Ooal_Gown said:
GSI would be without KDZ...
Click to expand...
Click to collapse
I know this :fingers-crossed:
I really need a dump to port the sound equalizer of the LGv40
Help me please
Here we go??
The Guide is Finished
scrubber said:
Hello!
Maybe you have a dump system or stock firmware for twrp?
Or maybe there is an instruction for unpacking the kdz firmware
Click to expand...
Click to collapse
To unpack a kdz use SALT on linux, works best for me
When I flash LOS16 into my inactive B slot, I am unable to boot into TWRP on slot B because there's some Lineage recovery in place and no option to flash anything and the sideload option doesn't work; I am checking inject TWRP. Am I missing something?
grandomegabosses said:
When I flash LOS16 into my inactive B slot, I am unable to boot into TWRP on slot B because there's some Lineage recovery in place and no option to flash anything and the sideload option doesn't work; I am checking inject TWRP. Am I missing something?
Click to expand...
Click to collapse
If you injected TWRP and made sure it was checked it should've given you TWRP in slot b I'll pm you with what to do give me a sec
On step 9, I get a failed error on resize. The error is:
Code:
/sbin/e2fsck -fp /dev/block/bootdevice/by-name/
system_b process ended with ERROR: 1
Unable to repair system
Anyone know how to fix this?
EDIT: I tried to install gapps after this, but it failed because of insufficient space. Went to check the /system partition size, and it only has 65MB free out of 1637MB. Is there a way to restore the original partition size and start from scratch?
xPreSiDenT said:
On step 9, I get a failed error on resize. The error is:
Anyone know how to fix this?
EDIT: I tried to install gapps after this, but it failed because of insufficient space. Went to check the /system partition size, and it only has 65MB free out of 1637MB. Is there a way to restore the original partition size and start from scratch?
Click to expand...
Click to collapse
You have 2 things to try, 1st. resize again and see if the error happens again... 2nd. Reboot recovery and try once more I've had this happen to me.
Ainz_Ooal_Gown said:
You have 2 things to try, 1st. resize again and see if the error happens again... 2nd. Reboot recovery and try once more I've had this happen to me.
Click to expand...
Click to collapse
I already booted into the rom. Would that affect anything? I'm gonna try anyway.
Edit: It worked. Gapps flashing now. Hopefully all will be well.
xPreSiDenT said:
I already booted into the rom. Would that affect anything? I'm gonna try anyway.
Edit: It worked. Gapps flashing now. Hopefully all will be well.
Click to expand...
Click to collapse
You can always factory reset after flashing gapps to get all your stuff synced and what not...or just add your account after and it may tell you to finish setting up.
Ooo interesting guide. Nice one :good:
Hey guys any workaround to get pie ? For at&t unlocked v40, currently in malaysia , dont have at&t carriers here .
So this would work with havoc 3 probably? I look forward to trying in a little.
Would this guide work with LOS17 that is currently in the ROMs section?
cavcagamgee said:
Would this guide work with LOS17 that is currently in the ROMs section?
Click to expand...
Click to collapse
If you mean Los 17 from SGC Markus? Then nope his rom has its own instructions and if you mean as a base for GSI well you can try but I haven't had any luck.
Is there a way to remove the GSI without reflashing the whole thing? RR is having an issue with the camera that is still in development. Is there any way to revert to the LOS 16 without losing my data?
cavcagamgee said:
Is there a way to remove the GSI without reflashing the whole thing? RR is having an issue with the camera that is still in development. Is there any way to revert to the LOS 16 without losing my data?
Click to expand...
Click to collapse
Restoring a back up would do it...if you made one...
I have tested several custom ROM's for Redmi 6a (cactus) but after all I Can say that this ROM is the best one.
Links:
Havoc Os 3.4 download link:
https://drive.google.com/uc?id=1orN9YiOTHgduKp0PgpGUq55KRNCt6UR0&export=download
boot-patch MIUI pie:
https://drive.google.com/file/d/109O1ptY9aapz_SVaysFyQmjmlD3ZPPMT/view
Bugs:
VoLTE
Volume up/down bug during phone calls
Installation:
Bootloader unlock
Install TWRP Pie
Download bootpatch pie 10.4.4 or 11.x
Magisk 19.3
Gapps arm-10-pico
1. Go to your twrp
2. Now click wipe then right bottom side click Format data and type yes
3. Wipe>advanced wipe>
Dalvik/Art Cache
Data
Internal Storage (optional)
Cache
System
Then Swipe to wipe
4. Copy GSI, Magisk, GAPPS in your SD-Card
5. Now click install button and select SD-Card
6. Then right bottom side select intall Image Option
7. Select your GSI
8. Select System Image> then swipe to confirm Flash
9. After Flash complete then go back and
10. Select bootpatch
11. Select boot> Then swipe to confirm Flash
12. Now go back and click install zip Option
13. select magisk 19.3> then swipe to confirm Flash
14. Now go back to home page and click wipe>advanced wipe
15. Select System
16. click Repair or Change File System
17.Click resize File System> swipe to resize
18. Again back to home page then click install Option
19. select SD-Card
20. select GAPPS> swipe to confirm Flash
reboot system
I follow every step you said in video but phone does not boot completely it show a circle rounding some time then reboot ! how many reboot is necessary ?
did you test it ?
@kharuba YouTube video link has been removed from your post. Kindly post the complete steps in your post. Linking to a YouTube video without any more information or detailing steps in the post is against the guidelines. Also, the thread has been moved to the Guides, News, & Discussion sub-forum since it is not a development thread and you're just sharing the ROM.
M_hack! said:
I follow every step you said in video but phone does not boot completely it show a circle rounding some time then reboot ! how many reboot is necessary ?
did you test it ?
Click to expand...
Click to collapse
follow my step-by-step Installation guide, it works 100%. If it doesn't boot flash the official MIUI ROM again and try it from this.
Thanks kharuba, Room very good..
how to enable volte ?? other thinks are work fine thanks for sharing.
KarthikEmperor said:
how to enable volte ?? other thinks are work fine thanks for sharing.
Click to expand...
Click to collapse
You will not find a custom ROM with Volte working. Also FM radio is not working.
What about performance ? How big is score in antutu ?
****ty rom, i can not get passed faceulock setup up on first boot, nor can i set it up or skip the faceunlock setting, it just keep stopping and close immediatialy after the camera shows up..trash
trash999 said:
****ty rom, i can not get passed faceulock setup up on first boot, nor can i set it up or skip the faceunlock setting, it just keep stopping and close immediatialy after the camera shows up..trash
Click to expand...
Click to collapse
Don't try to install face unlock. Then it works. Always deny.
Hi, here's a guide on how install crDroid 7.5 (A11) on Redmi 8
UPDATE: THERE'S 7.5 VERSION AVAIABLE, IF YOU ARE USING 7.4 FOLLOW THIS STEPS TO UPDATE WITHOUT LOSING DATA (NEW ROM IS IN MEGA FOLDER, ):
1- Reboot in recovery
2- Go to Wipe -> Avanced wipe -> wipe dalvik, cache and system
3- Go to Reboot -> Recovery
4- Now follow the normal guide from the flashing of the .img file as system image
VERY IMPORTANT: DON'T FORMAT DATA AFTER FLASHING GSI FIXER OR YOU WILL LOST ALL YOUR DATA
Features:
- All functions of the phone work (face unlock, fingerprint, voLTE, voWIFI, hotspot, bluetooth, fast charge, DT2W, ...)
- Magisk safetynet passed without flash nothing (screenshot at the bottom)
- Permissive Selinux by default (in settings is writing disabled, it's wrong) but you can switch to enforcing with
SelinuxModeChanger app, apk at the bottom
What doesn't work
- Nothing if you use fixes below
Note 1: You may have problems with the brightness or sim calls/sms, there are solutions:
- For brightness: Open settings -> Go in "Phh Treble Settings" -> "Misc Features" -> Scroll until you are in backlight menu -> Select "Force alternative backlight scale" and "Enable auto-brightness overlay" -> then deselect both and reboot
- For sim calls: Open settings -> Go in "Network and internet" -> "Mobile network" -> Tap on "Preferred network type" and select "GSM/WCDMA/LTE" or "Global" (try which is better for you) and then reboot
Note 2: If you fing bugs tell me in comments, maybe I could help you (I'm not the developer of the rom)
IMPORTANT ADVICE:I am not responsible for any damage caused to your device by not following the steps, all the steps were tested on my personal device and are confirmed, my device is Redmi 8 4/64
Installation Steps - All the files you need are HERE
Note 3: I did the installation coming from Mui 12.0.1 stock (flashed in fastboot with Mi Flash) and there was no problem in the installation process or in the boot process, YOU NEED THIS ROM IF YOU WON'T PROBLEMS
1- First make a backup of all the necessary information in case something goes wrong you can easily recover, Charge the battery at least 80%
All your data will be deleted during the process
2- Unlock the Bootloader if you have not already done it or do not know how to, follow this post: http://en.miui.com/unlock/
3- Before continue following steps estract on pc "crdrom-v302-210315-arm64-bvZ.img" from "crdrom-v302-210315-arm64-bvZ.img.xz" and activate USB debug in phone settings
4- Reboot in fastboot and connect the phone to the pc with cable
5- Install on pc minimal adb tool (zip at the bottom), flash the TWRP recovery typing " fastboot flash recovery ", now drag twrp file near the command, then vbmeta typing " fastboot --disable-verity --disable-verification flash vbmeta " and drag vbmeta file near the command. Finished the procedure type " fastboot reboot " and hold volume + on the phone until you see the recovery screen
6- Scroll on the slider at the bottom of the phone screen to access in the TWRP
7- Go to Wipe -> Format data -> type "yes"
8- Go to Reboot -> Recovery
9- Go to Wipe -> Avanced wipe -> wipe dalvik, data, cache and system
10- Go to Reboot -> Recovery
NOW YOU HAVE TO TRANSFER ALL OTHER FILES OR IN THE INTERNAL STORAGE OF THE PHONE OR IN SD/USB WITH OTG CABLE
11- Go to Install -> Select the storage where you have files -> Install img -> select "crdrom-v306-210425-arm64-bvZ.img" (Extracted from the .xz file) -> select "system image" and flash
12- Wait and then go to Reboot -> Recovery
13- Wipe -> Advanced wipe -> select "system" and click on "Repair or change file system" -> Resize system
14- Wait and then go to Reboot -> Recovery
15- Install -> Select the storage where you have files -> Flash "GSI-BUGS-FIXER_11_Q.zip"
16- Wipe -> Format data -> type "yes"
17- Wait and then go to Reboot -> Recovery
18- Install -> Select the storage where you have files -> Flash "BiTGApps-arm64-11.0.0-R19_signed.zip"
19- Wait and then go to Reboot -> System
20- Configure phone and enjoy your new rom
Note 4: I reccomend you to flash magisk after you have configured the rom to avoid problems, I leave you the zip to flash in recovery below
Note 5: I reccomend you the best gcam I've found for Redmi 8, everything works except slow motion, link HERE
Thanks for the attenction
-Estatè
Happy that many GSI roms are under develment. I hope this phone will die due to hardware, as there are lots of options in future to keep the software updated.
Anyway, if someone intends to try, following is the link of all GSI Roms.
Generic System Image (GSI) list
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
Can i flash vbmeta through recovery
Naulels said:
Can i flash vbmeta through recovery
Click to expand...
Click to collapse
Hey
I'm not using crDroid yet, but I've already installed TWRP.
It is advertised that you should flash vbmeta when you're installing TWRP.
I hope I can help you
Hey !
I wanna try this but I have rooted my phone so here is my question : do I need to remove the root to install this GSI ?
Thx a lot
Volume doesn't work correctly, I cannot increase or decrease the volume. And I plugged my headphone not play through headphone, it play through speaker. Sorry my English
Naulels said:
Can i flash vbmeta through recovery
Click to expand...
Click to collapse
No, you have to flash it with ADB like twrp
letouvetpierre said:
Hey !
I wanna try this but I have rooted my phone so here is my question : do I need to remove the root to install this GSI ?
Thx a lot
Click to expand...
Click to collapse
I recommend you to remove it from the magisk app to avoid problems but I think that would be the same
Naulels said:
Volume doesn't work correctly, I cannot increase or decrease the volume. And I plugged my headphone not play through headphone, it play through speaker. Sorry my English
Click to expand...
Click to collapse
I haven't this problem, have you flashed the gsi fixer? Did you start the installation from miui 12.0.1? It's really important, anyway, you can try to do again the procedure
Does VoLTE and VoWIFI works ? It's a GSI so I'm not thinking it works...
letouvetpierre said:
Does VoLTE and VoWIFI works ? It's a GSI so I'm not thinking it works...
Click to expand...
Click to collapse
Yes, all work fine becouse you flash the gsi fixer for gsi roms on redmi 8
Estatè Mosconi said:
I haven't this problem, have you flashed the gsi fixer? Did you start the installation from miui 12.0.1? It's really important, anyway, you can try to do again the procedure
Click to expand...
Click to collapse
I have reinstalled and fixed it, thanks
Hey !
I'm so happy !
Everything works on that GSI rom, but I haven't the certification on SafetyNet.
With the covid-tracing app, there is a little problem but it's with all the custom roms so...
Thanks a lot for your guide !
letouvetpierre said:
Hey !
I'm so happy !
Everything works on that GSI rom, but I haven't the certification on SafetyNet.
With the covid-tracing app, there is a little problem but it's with all the custom roms so...
Thanks a lot for your guide !
Click to expand...
Click to collapse
Hi, I'm happy for you, for safetynet try the magisk module, I didn't have this problem, anyway, try the rom and than leave a feedback, it could be useful for other people who want to try this rom
I can't get this rom to work correctly. Did the steps as described, but it has SELinux not enforced and Google play isn't certified. Tried multiple times.
EDIT: seems my phone is soft bricked now (Can't install any rom). Going back to xaomi stock to try again.
I tried again and got it to work. The certificate patch throws an error but Google apps are working.
I get an SE Linux not enforcing error. though.
Is there anything I can do about that?
I lost the treble-overlay-xiaomi-redmi8.apk file ,I should problems with the brightness
ndduc said:
I lost the treble-overlay-xiaomi-redmi8.apk file ,I should problems with the brightness
Click to expand...
Click to collapse
There is the solution for brightness in the guide, you don't need that file
Estatè Mosconi said:
There is the solution for brightness in the guide, you don't need that file
Click to expand...
Click to collapse
thanks you, i fixed
ndduc said:
thanks you, i fixed
Click to expand...
Click to collapse
Ok good