Hi Guys,
I really need help here. I am using Huawei P9 EVA-L19.
I once unlocked bootloader, installed TWRP and rooted my phone. After 1 day I using it, I tried to flash to unofficial emui 5 which is follow the instruction from here; https://forum.xda-developers.com/p9/how-to/huawei-p9-eva-l19-android-7-0-nougat-t3532649
However, after I done flash it. I found out that there's a lot of application I can't access including my camera ( which totally gone from my phone ). I decided to flash back to emui 4.1.
The issue that I'm facing right now is, I can't even access to TWRP. I tried a lot of ways to install TWRP and try to boot. Nothing happen. I've tried to use Dload, I tried using CMD it seems never success.
Now, I really need someone to help me on this issue. I know there's a lot of people who facing the same issue that I'm facing right now. Or someone who already solve this issue please assist me. I'm already give up on this.
Thanks in advance.
Related
Hi everyone
I recently updated to B609 and (as expected) my phone was un-rooted.
I decided it would be better for me to just install a ROM instead of waiting for a new way to ROOT every time a new OTA comes out. (I have seen some very interesting ones that include Xposed)
This would be the first time i install a ROM on one of my phones but i do know how to use custom recovery's and i will always keep a copy of a backup close so i can flash back when something goes wrong.
A problem i have with starting all of this: I can't seem to find a way to unlock the Bootloader on my phone.
I have looked online but i always get links for older versions/other phones/German stuff.
Second problem: The recovery. As far as i understand, there is no working TWRP for EMUI3.0. BUT there should be a working CMW recovery. Should i go fot CMW?
Third problem: Which ROM? There are 3 that grabbed my attention. Se7en-Rom (But it seems like it hasn't been updated in a while), My-RoM (which seems the most interesting for me at the moment) and Miui (which i just found out about). Which should i go with or should i use another one? I can already say that i want my phone Rooted and Xposed is something i would love to have back (since i used to have it on my previous phone).
Any advice and help would be appreciated
JellyFox said:
Hi everyone
I recently updated to B609 and (as expected) my phone was un-rooted.
I decided it would be better for me to just install a ROM instead of waiting for a new way to ROOT every time a new OTA comes out. (I have seen some very interesting ones that include Xposed)
This would be the first time i install a ROM on one of my phones but i do know how to use custom recovery's and i will always keep a copy of a backup close so i can flash back when something goes wrong.
A problem i have with starting all of this: I can't seem to find a way to unlock the Bootloader on my phone.
I have looked online but i always get links for older versions/other phones/German stuff.
Second problem: The recovery. As far as i understand, there is no working TWRP for EMUI3.0. BUT there should be a working CMW recovery. Should i go fot CMW?
Third problem: Which ROM? There are 3 that grabbed my attention. Se7en-Rom (But it seems like it hasn't been updated in a while), My-RoM (which seems the most interesting for me at the moment) and Miui (which i just found out about). Which should i go with or should i use another one? I can already say that i want my phone Rooted and Xposed is something i would love to have back (since i used to have it on my previous phone).
Any advice and help would be appreciated
Click to expand...
Click to collapse
I have a P7-L10 with B609. I was able to successfully root it with RootGenius. When you root it, the bootloader is unlocked at the same time. As far as I can tell, the root is 100%. As for CWM, you can get it from here:
http://forum.xda-developers.com/ascend-p7/development/mods-tweaks-kernels-recoverys-emui-2-3-t2966670
TWRP doesn't work with B609/emui3.0.
My L10 has faulty flash memory and won't accept a custom recovery, so I can't test CWM or any custom ROMs. Perhaps others can advise. Good luck!
arthios said:
I have a P7-L10 with B609. I was able to successfully root it with RootGenius. When you root it, the bootloader is unlocked at the same time. As far as I can tell, the root is 100%. As for CWM, you can get it from here:
http://forum.xda-developers.com/ascend-p7/development/mods-tweaks-kernels-recoverys-emui-2-3-t2966670
TWRP doesn't work with B609/emui3.0.
My L10 has faulty flash memory and won't accept a custom recovery, so I can't test CWM or any custom ROMs. Perhaps others can advise. Good luck!
Click to expand...
Click to collapse
RootGenius was the first thing i tried. It went up to 66% then i got an error but that was a fully Chinese version.
I just tried it again with the one i found by using Google and it goes up to 72%, then tells me that the root has failed.
Which version did you use?
This is what I used and it worked fine (root genius): http://forum.xda-developers.com/showthread.php?t=2789337
As for bootloader, as far as I know from, starting with firmware 133 (Emui 2.3) all devices have unlocked bootloader
CWM is the only custom recovery for the moment;
Did not try any custom ROM (I'm happy with stock ROM for the moment).
Cheers
ibeqa said:
This is what I used and it worked fine (root genius): http://forum.xda-developers.com/showthread.php?t=2789337
As for bootloader, as far as I know from, starting with firmware 133 (Emui 2.3) all devices have unlocked bootloader
CWM is the only custom recovery for the moment;
Did not try any custom ROM (I'm happy with stock ROM for the moment).
Cheers
Click to expand...
Click to collapse
That's the first one i tried out. The first few times it ended in an Error. I tried it again today and when my phone reboots during the process, RootGenius loses contact with my phone.
And there is a bootloader-ish thing, but the only options i have is reboot, factory reset and cache wipe.
JellyFox said:
That's the first one i tried out. The first few times it ended in an Error. I tried it again today and when my phone reboots during the process, RootGenius loses contact with my phone.
And there is a bootloader-ish thing, but the only options i have is reboot, factory reset and cache wipe.
Click to expand...
Click to collapse
Hmmm, strange problem. Assuming you have the latest version of HiSuite installed and your drivers are current, all I can suggest is trying again with RootGenius (I used version 1.8.7) with your firewall and antivirus disabled or perhaps trying with Vroot. If you do decide to try Vroot it probably won't work unless you disable your firewall and antivirus.
arthios said:
Hmmm, strange problem. Assuming you have the latest version of HiSuite installed and your drivers are current, all I can suggest is trying again with RootGenius (I used version 1.8.7) with your firewall and antivirus disabled or perhaps trying with Vroot. If you do decide to try Vroot it probably won't work unless you disable your firewall and antivirus.
Click to expand...
Click to collapse
I disabled my firewall and antivirus and gave RootGenius another try. Normally it goes up to 71% and gives me the error. Now it went to 71%, rebooted and then it gave me the error. The weird part is that right before i get the error, it says the installation is complete.
Moved on to Vroot (which is called Iroot now apparently) . It took a while longer but it wasn't able to do it either.
JellyFox said:
And there is a bootloader-ish thing, but the only options i have is reboot, factory reset and cache wipe.
Click to expand...
Click to collapse
Get in bootloader mode, if your bootloader is unlocked, it will be written and highlighted with red color. I will point out again, starting with firmware B133 (Emui 2.3) all bootloaders for L10 version (I don't know for Chinese versions) are unlocked
Cheers.
update to b615 and flash or just flash this >> http://forum.xda-developers.com/ascend-p7/development/b615-unlocked-boot-img-t3050926 and use rootgenius remove inmutable etc...
btw there is twrp for emui 3 which mostly work fine http://forum.xda-developers.com/showpost.php?p=59340975&postcount=208
Z!L0G80 said:
update to b615 and flash or just flash this >> http://forum.xda-developers.com/ascend-p7/development/b615-unlocked-boot-img-t3050926 and use rootgenius remove inmutable etc...
btw there is twrp for emui 3 which mostly work fine http://forum.xda-developers.com/showpost.php?p=59340975&postcount=208
Click to expand...
Click to collapse
I still didn't get the OTA for B615 yet but thank you for the recovery.
ibeqa said:
Get in bootloader mode, if your bootloader is unlocked, it will be written and highlighted with red color. I will point out again, starting with firmware B133 (Emui 2.3) all bootloaders for L10 version (I don't know for Chinese versions) are unlocked
Cheers.
Click to expand...
Click to collapse
You were right! (not that i every doubted you). I found the problem i had: For some reason, i couldn't boot in bootloader trough my phone BUT i was able to do it with 'adb reboot bootloader'. After making some idiotic mistakes and having to re-flash the stock ROM, I finally was able to install My-RoM v3.3, its rooted, i have Xposed so i am happy
So thank everyone for the help!
Hello guys,
i did a mistake yesterday and accidently hit the update button of the official update dialog from mm to N on my p9. Because you cannot cancel it, it proceeded the whole process...
Now i'm stuck on the new Version and first problem were missing apps like updater, and camera?!
I was looking for the new buildnumber and it says NRD90M test-keys.
Previously i was on root but dont know the buildnumber (some MM), bootloader is unlocked.
I searched a lot on xda but did not find a similar problem with a solution that i would try.
Can anyone help me how to fix that problems? I read about a rollback but didnt find a way to do that. TWRP is loading if that helps in any way.
Goal is to get root to work with magisk maybe and an up-to-date nougat rom (and Camera back since 3rd party isnt that great).
If any other info is needed ill provide that.
Thanks in advance!
I did some research an tried a few more things.
Here's whats not working:
-flashing b136 with dload from paulobrian's thread. fails at 5% mark
-relocking bootloader with srk-tool and fastboot. resulst in: failed remote root type is risk
-flashing several other full versions
i flashed (succesfully) stock recovery following this tip: https://forum.xda-developers.com/showpost.php?p=67754200&postcount=4
system is booting but weird behaviour as described.
I read something about succesful flashing stock only with locked bl and only locking bl with stock recovery but this doesnt work for me.
Any tipps are much appreciated.
I'm using a rooted huawei p9 Eva l19 on b390 stock firmware. Unfortunately she is sick and her Bluetooth is not working. I read on the net that clearing the cache of the Bluetooth app would help but I can't find the app in settings.
Any suggestions
Pls reply
Hmm, i am on the same boat.
Will watch your thread too, hope someone will have a solution.
rwa66 said:
Hmm, i am on the same boat.
Will watch your thread too, hope someone will have a solution.
Click to expand...
Click to collapse
Well seems like no one is wanting to help :crying:
Rollback to Marshmallow & Again update to Nougat
Great, thanks Rafa Mistry!
I tried to go back to B182, that's Marshallow, failed at 5%.
But I searched a bit and i think we can use the procedure suggested here, Abhisht009.
I don't have the time to try right now, but i will do it tomorrow night, let's hope we will have good working phones soon again.
If you need back to Android use rom from Huawei website and download Android 6 than use method 3 buttons
rwa66 said:
Great, thanks Rafa Mistry!
I tried to go back to B182, that's Marshallow, failed at 5%.
But I searched a bit and i think we can use the procedure suggested here, Abhisht009.
I don't have the time to try right now, but i will do it tomorrow night, let's hope we will have good working phones soon again.
Click to expand...
Click to collapse
I dont have time right now to do this but I know how to
You must first download the rollback package for your p9 model from the huawei website
Then download an older version of marshmallow (not B182, use an older one)
First install the stock recovery
Flash the doll back package using dload
Boot up
Flash the marshmallow firmware
Done
You should probably remove the fingerprints before
Tell me if it works
After trying loads of older MM firmwares, which all gave me compatibility errors, i ended up flashing mOOnlight ROM.
Bluetooth is working, all is good now.
So long story short I wanted to get root access in order to install an audio mod for my phone, realized it was basically pain in the ass and most of the time it won't work so I want to revert the changes back to where I started (a.k.a. stock recovery, locked bootloader). Also system update doesn't work with TWRP, it just boots into TWRP and doesn't proceed installing the update. I'd like to fix that.
My phone is VTR-L29C432 B360 Oreo 8.0
I flashed this TWRP -> https://forum.xda-developers.com/p10/development/recovery-twrp-3-2-1-0-emui-8-0-4-04-2018-t3773449
Phone hasn't been rooted.
I'm sorry if it looks like I made something dumb but I just want some help. I'd appreciate anything really.
Anyone anything? At least I'd like to revert to stock recovery so I can install B365.
On the other side would installing B365 from FF work fine with TWRP?
Really nobody has a solution? Can't I extract the stock recovery for B360 from somewhere? It's that I'm new with Huawei phone and I'm not sure how everything works here. I used to own Galaxy Y but things were simpler there.
BloodBullet said:
Really nobody has a solution? Can't I extract the stock recovery for B360 from somewhere? It's that I'm new with Huawei phone and I'm not sure how everything works here. I used to own Galaxy Y but things were simpler there.
Click to expand...
Click to collapse
With this guide I update B60 A B 365 I hope it helps you
https://forum.xda-developers.com/p10/how-to/guide-manual-updgrade-to-update-oreo-t3758286
Hey all, so yesterday i got my phone stuck in a "boot loop". I was trying to install TWRP and magisk to root my phone, after 2 hours of constantly reinstalling TWRP i finally got it to work. Every time my phone would end up just being on a black screen not being able to get to the TWRP menu but i could still access fastboot, i fixed it by "installing" orangefox TWRP, it never actually installed it but i got back into my phone at least, however now thats not working, and im stuck here only being able to get into fast boot. I followed this tutorial - https://forum.xda-developers.com/k20-pro/how-to/guide-redmi-k20-pro-unlock-root-t3974127. When i eventually did get it to install TWRP its because i used the All in one tool. Im currently stuck in the loop again, all i did was follow a youtube video on overclocking my display to 81hz, so i was in TWRP, made a backup of a file, flashed the 81hz.img and now i cant get into twrp or my phone.....How do i fix this?
Im currently flashing a stock rom with MiFlash, taking a few minutes but this is the last thing i can think of to fix this, no im not using the flash and lock method.
Edit: So i decided to use the All in one tool to flash the rom instead, i can now get into TWRP but the phone still by default boots to Fastboot, it wont actually go into the phone? What do i do?
Edit 2: Okay so that fixed it, now to reinstall TWRP with the all in one tool and reroot my phone.........
Edit 3: Okay so new issue, everything is all good TWRP is installed phone is rooted, but im trying to update to the latest MIUI 10 version (on MIUI 9 atm) and i can't install it? It downloads fine but it wont install? Do i have to flash the update file since it wont update through the updater?
JasonBjorn said:
Hey all, so yesterday i got my phone stuck in a "boot loop". I was trying to install TWRP and magisk to root my phone, after 2 hours of constantly reinstalling TWRP i finally got it to work. Every time my phone would end up just being on a black screen not being able to get to the TWRP menu but i could still access fastboot, i fixed it by "installing" orangefox TWRP, it never actually installed it but i got back into my phone at least, however now thats not working, and im stuck here only being able to get into fast boot. I followed this tutorial - https://forum.xda-developers.com/k20-pro/how-to/guide-redmi-k20-pro-unlock-root-t3974127. When i eventually did get it to install TWRP its because i used the All in one tool. Im currently stuck in the loop again, all i did was follow a youtube video on overclocking my display to 81hz, so i was in TWRP, made a backup of a file, flashed the 81hz.img and now i cant get into twrp or my phone.....How do i fix this?
Im currently flashing a stock rom with MiFlash, taking a few minutes but this is the last thing i can think of to fix this, no im not using the flash and lock method.
Edit: So i decided to use the All in one tool to flash the rom instead, i can now get into TWRP but the phone still by default boots to Fastboot, it wont actually go into the phone? What do i do?
Edit 2: Okay so that fixed it, now to reinstall TWRP with the all in one tool and reroot my phone.........
Click to expand...
Click to collapse
A bit of advice.
If you don't know what your doing, don't follow random YouTube videos.
There are some very good videos and some very bad videos. If you don't know what you're doing, you won't know the difference between a good video and a bad one
Until you're comfortable with flashing mods, etc. stick to advice given here. It might not be instant, but you'll get good advice (if it's not good advice then someone else will point that out).
When asking for help give us more info.
What phone do you have?
What ROM was on the phone before first trying to install TWRP?
What version of TWRP have you been trying to install?
Why did you change from using Mi Flash Tool to the all in one tool?
Did you wait for the Mi Flash Tool to finish but it didn't work, or did you get bored of waiting for it to complete and cancelled it?
I appreciate this is a bit late now and not necessary as you've eventually sorted it yourself, but giving the info I've pointed out, at the time, may have actually got you some useful replies before you actually got there yourself.
Robbo.5000 said:
A bit of advice.
If you don't know what your doing, don't follow random YouTube videos.
There are some very good videos and some very bad videos. If you don't know what you're doing, you won't know the difference between a good video and a bad one
Until you're comfortable with flashing mods, etc. stick to advice given here. It might not be instant, but you'll get good advice (if it's not good advice then someone else will point that out).
When asking for help give us more info.
What phone do you have?
What ROM was on the phone before first trying to install TWRP?
What version of TWRP have you been trying to install?
Why did you change from using Mi Flash Tool to the all in one tool?
Did you wait for the Mi Flash Tool to finish but it didn't work, or did you get bored of waiting for it to complete and cancelled it?
I appreciate this is a bit late now and not necessary as you've eventually sorted it yourself, but giving the info I've pointed out, at the time, may have actually got you some useful replies before you actually got there yourself.
Click to expand...
Click to collapse
I have a rough idea on what im doing i've done all this stuff before loads, but xiaomi just seems to be different idk. Considering this is the k20/k20pro section i assumed its obvious thats what i was using.......Everything is sorted like i said but i cant get MIUI to update, it downloads, i hit reboot and it boots me to TWRP instead of installing the update.......i've come to really like the MIUI without the app drawer but now i have an app drawer as im on Android 9, I flashed the lastest rom but before flashing i didnt have an app drawer and was on the latest build so no idea whats going on there......guess i just have to live with this now?
JasonBjorn said:
I have a rough idea on what im doing i've done all this stuff before loads, but xiaomi just seems to be different idk. Considering this is the k20/k20pro section i assumed its obvious thats what i was using.......Everything is sorted like i said but i cant get MIUI to update, it downloads, i hit reboot and it boots me to TWRP instead of installing the update.......i've come to really like the MIUI without the app drawer but now i have an app drawer as im on Android 9, I flashed the lastest rom but before flashing i didnt have an app drawer and was on the latest build so no idea whats going on there......guess i just have to live with this now?
Click to expand...
Click to collapse
What's not obvious is whether you have a Chinese or Indian K20 Pro, or a global or European 9T Pro. Also whether you're trying to install the version of MIUI that is correct for the phone, or if you're flashing from a different region. As you say Xiaomi does things a bit different, so we're seeing things in these forums that what works on one version of the phone doesn't quite work on another.
Robbo.5000 said:
What's not obvious is whether you have a Chinese or Indian K20 Pro, or a global or European 9T Pro. Also whether you're trying to install the version of MIUI that is correct for the phone, or if you're flashing from a different region. As you say Xiaomi does things a bit different, so we're seeing things in these forums that what works on one version of the phone doesn't quite work on another.
Click to expand...
Click to collapse
well heres the weird thing, i bought the EU version of the phone, which i know is supposed to be the 9t pro, but not only did the site call it the K20 pro, but in the settings its model number is also the K20 pro. I got everything working fine.