Related
[Q] Looking for "Custom DLL" (for flashing *.TOT) which Bypasses Cross Firmware Check
Hi I would like to return to stock on my soft bricked unlocked LG G Flex D959 T-mobile (details in my other thread http://forum.xda-developers.com/lg-g-flex/help/soft-brick-custom-recovery-logs-t2919608)
I see for the LG G2 there is a custom DLL that bypasses the check when flashing. I want to flash the wrong version for my unlocked LG G Flex D959 T-Mobile.
This DLL for G2 was referenced http://forum.xda-developers.com/showthread.php?t=2695855 and http://forum.xda-developers.com/showthread.php?t=2432476. .
"YOU MAY NEED TO USE THE CUSTOM DLL FILE BELOW FOR WHEN/IF YOU USE TOT FILE TO RETURN TO STOCK!!! The reason for this is because some D80220a references needed to stay in build.prop and LG Flash will not flash D800 firmware on device when it thinks it is D802. After you return to stock using TOT method you can use the regular DLL file or keep using the custom DLL file. The download for it can be found in the download section below."
Is it possible for me to flash using this DLL for the G2? If not where can I find an equivalent DLL for the G Flex?
Running out of options!
Thanks,
changstalicious said:
Hi I would like to return to stock on my soft bricked unlocked LG G Flex D959 T-mobile (details in my other thread http://forum.xda-developers.com/lg-g-flex/help/soft-brick-custom-recovery-logs-t2919608)
I see for the LG G2 there is a custom DLL that bypasses the check when flashing. I want to flash the wrong version for my unlocked LG G Flex D959 T-Mobile.
This DLL for G2 was referenced http://forum.xda-developers.com/showthread.php?t=2695855 and http://forum.xda-developers.com/showthread.php?t=2432476. .
"YOU MAY NEED TO USE THE CUSTOM DLL FILE BELOW FOR WHEN/IF YOU USE TOT FILE TO RETURN TO STOCK!!! The reason for this is because some D80220a references needed to stay in build.prop and LG Flash will not flash D800 firmware on device when it thinks it is D802. After you return to stock using TOT method you can use the regular DLL file or keep using the custom DLL file. The download for it can be found in the download section below."
Is it possible for me to flash using this DLL for the G2? If not where can I find an equivalent DLL for the G Flex?
Running out of options!
Thanks,
Click to expand...
Click to collapse
I was Looking for it also...
Changed My F340K into D955. I tried with both DLLs but both failed
I don't believe so. And what are you meaning by "unlocked" I've seen several peep lately say they are "unlocked"
Correct me if I'm wrong but the only flex variant who's bootloader can be unlocked is the F340. The D959 has not been able to be bootloader unlocked yet. I don't think the AT&T, Verizon, or Sprint variants have been either. So what do you mean by "unlocked"
mattwheat said:
I don't believe so. And what are you meaning by "unlocked" I've seen several peep lately say they are "unlocked"
Correct me if I'm wrong but the only flex variant who's bootloader can be unlocked is the F340. The D959 has not been able to be bootloader unlocked yet. I don't think the AT&T, Verizon, or Sprint variants have been either. So what do you mean by "unlocked"
Click to expand...
Click to collapse
Yup i think he ment to say gsm unlocked.
sickkside13 said:
Yup i think he ment to say gsm unlocked.
Click to expand...
Click to collapse
mattwheat said:
I don't believe so. And what are you meaning by "unlocked" I've seen several peep lately say they are "unlocked"
Correct me if I'm wrong but the only flex variant who's bootloader can be unlocked is the F340. The D959 has not been able to be bootloader unlocked yet. I don't think the AT&T, Verizon, or Sprint variants have been either. So what do you mean by "unlocked"
Click to expand...
Click to collapse
I have edited my bulid.prop.. and forgot to change permissions.. now my phone after LG goes to blank screen with front Green LED blinking..
I succesfully pushed the backup file from my pc.. but I am unable to fix permissions..
Can you get into custom recovery or download mode.
mattwheat said:
Can you get into custom recovery or download mode.
Click to expand...
Click to collapse
I am waiting for Official Lollipop update So i dont have custom recovery..
When I volume Up and Power in my F340K G Flex on Stock Rooted 4.4.2 V20D it will go to a LG Service menu with Korean Written..
in this Menu ADB shows the device as Recovery And I am Once able to Push My backup Build.prop...
When I Volume Down + Power It goes to reovery but It only shows an Android icon with Red Triangle on It..
Look my Build.prop file and its back with Right Permissions..
When I adb Fix permissions. It returned that Operation not permitted or Permissions denied.
Yes I can go to Download Mode... Korean written in it
If you can get to download mode then PC Suite or LG Flash Tool should work to refresh KK 4.4.2 on it for ya. And you can put custom recovery on there and root and such. Just flash back to stock when the OTA comes out. Its liable to be 3 months or so if I had a guess
mattwheat said:
If you can get to download mode then PC Suite or LG Flash Tool should work to refresh KK 4.4.2 on it for ya. And you can put custom recovery on there and root and such. Just flash back to stock when the OTA comes out. Its liable to be 3 months or so if I had a guess
Click to expand...
Click to collapse
If Connect my phone in download mode to "LG mobile support mode" and upgrade recovery option it says that no upgrade needed,
and if I connect My phone in black screen mode, It keep saying that mobile isnt connected during the os/ Phone check..
downloading PC Suite..
any further help?
So you're on the wrong variant software ?
Sorry I'm just trying to understand what is exactly going on. Does it boot into any OS ?
mattwheat said:
So you're on the wrong variant software ?
Sorry I'm just trying to understand what is exactly going on. Does it boot into any OS ?
Click to expand...
Click to collapse
PC Suite also says that no need to update in All 4 modes..
1. LG service Mode (adb recognizes it as Recovery mode)
2. Black screen mode
3.Recovery mode (Android Laying with Red Exclamation Mark) All Korean Mobiles have this instead of Recovery, Dont know why.
4. Download Mode
Yes, I have changed My Product Model from F340K to D955 and add remove some line realted to Telephony..
AS I have pushed my backup file back (some luck) and read it with the command "less build.prop" in system directory and also pulled it and see contents. its ok now..
The only Issue remains is Of Root Ownership and 644 permissions as you can see in the picture, (as For My knowledge)
You don't update. Go the top menu bar and click on "mobile devices" then "restore upgrade errors" while in download mode. It will not flash back in android versions but it will flash the same version or newer if there is newer. It may not recognize your device and that may be a good thing cuz then it will ask for your model # and serial number so it knows what software to flash. Takes a bit to download the .kdz but only about 5 mins to flash once it's downloaded.
As I told You that I somehow managed to push my Backup Build.prop file to system..
This time Tot File worked... LG flash Tool 2014 didnt worked for me. im all three configurations...
Restored 10C... Now updating again again OTA... To V20D...
I went to load MOFOROOT onto droid turbo, the cable go unplugged in middle of process.
Turbo has been stuck in bootloop ever since.
Using windows 8 and I have used every resource to try and get the phone to connect to computer so I can reload stock ROM.
The drivers will not load to the phone.
I have read just about every thread regarding droid turbo/maxx and cannot find a similar problem/solution.
I have used USBDeview. - attached
I have done partition clean.
I have wiped/factory reset
I have tried RSD Lite - which will not find the device
I have tried connecting it to PC through recovery mode.
ADB cant find device.
All in all how do i get stock rom onto phone when computer can't load drivers to it?
[quote name="jerney307" post=59961038]After cable got unplugged while flashing moforoot. I have tried to put stock ROM back on through boot loader.
I get stuck on your step #4. Says devices not found.
I am able to see my phone though usb deview as fastbook quark S... or while in recovery mode as xt1254. (see attached)
I have uninstalled/reinstalled drivers mulitple times but it will not take to my phone/computer.
I have used USBDeview.
I have done partition clean.
I have wiped/factory reset
I have tried RSD Lite - which will not find the device
I have tried connecting it to PC through recovery mode.
I have tried everything. Still at a stand still. Help would be greatly appreciated. I would much rather donate someone on here than to pay 200$ to insurance a new phone.[/QUOTE]
You have a droid turbo you have to flash back using rsd lite, I believe the rsd version you have doesn't detect your phone, uninstall it and use the one on my thread http://forum.xda-developers.com/showthread.php?t=3063470, also download your phones firmware (verizon) and your phone will be detected and it will flash
tried it
I have downloaded both from that site and no luck.
jerney307 said:
I have downloaded both from that site and no luck.
Click to expand...
Click to collapse
you need to use Verizon Stock Kitkat /// VRZ_XT1254_KDF21.128-15_15_CFC_SVC.xml.zip
turn off your phone and put it on fastboot mode (power and volume down 2 seconds) and then plug it on pc
it should be detected by rsd lite 6.2.4
select the phone and then select the firmware VRZ_XT1254_KDF21.128-15_15_CFC_SVC.xml.zip
and click on uncompress and flash
that should get your phone working.
also make sure you have motorola device manager for the proper fastboot drivers https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
do it
Complete - no luck
Okay so i went and uninstalled all the previous stuff i had. drivers/rsd lite etc
Reinstalled everything that you gave me and where the plan deviated was at "uncompress and flash"
I could uncompress only because rsd will not see my phone.
i made sure to download drivers and all.
Something is not right here, it seems like it would be easy.. but nothing will see my phone
ive attached some screenshots
Update - still not fixed
okie here's the update.
I borrowed a win 7 laptop from a friend and tried everything again.
Still, RSD will not see my phone and computer says no drivers available.
Anyone have ideas?
jerney307 said:
okie here's the update.
I borrowed a win 7 laptop from a friend and tried everything again.
Still, RSD will not see my phone and computer says no drivers available.
Anyone have ideas?
Click to expand...
Click to collapse
its just a driver issue... what drivers are you installing? When you install them, is windows using them (device manager should not be saying unknown/generic usb device)?
firmware help
Help I have droid turbo xt1254 it stuck in boot loop have no TWRP no cwm no custom recovery, However, I know how to flash I have all RSDLite, right Device Manager, adb fasboot stuff, all stuff transfers good but I don't find the right firmware, as it says this message:
(bootloader) Invalid signed image (bootloader) Preflash validation failed
Mobile Specs:
BL: moto-apq8084-70.96 )sha-b624508
Baseband: MDM9625_41.51.07.22.04R QUARK-CUST
Serial#: ZX1F24DNVV
CPU: APQ8084 ES1.1
Device is locked. Status COde: 0
can anybody help me???
kr12 said:
Help I have droid turbo xt1254 it stuck in boot loop have no TWRP no cwm no custom recovery, However, I know how to flash I have all RSDLite, right Device Manager, adb fasboot stuff, all stuff transfers good but I don't find the right firmware, as it says this message:
(bootloader) Invalid signed image (bootloader) Preflash validation failed
Mobile Specs:
BL: moto-apq8084-70.96 )sha-b624508
Baseband: MDM9625_41.51.07.22.04R QUARK-CUST
Serial#: ZX1F24DNVV
CPU: APQ8084 ES1.1
Device is locked. Status COde: 0
can anybody help me???
Click to expand...
Click to collapse
This is the thread below you should start with. This thread you are posting in is from 3 years ago, with different firmware. "Moforoot" was only with Kitkat, and was BEFORE Sunshine bootloader lock came along (November 2015).
Read post #1 CAREFULLY of the thread below. You will need Sunshine ($25) to unlock your bootloader. Depending on the firmware version you are on (you left that out), you may need to use a powerful temp root tool to allow Sunshine to run properly. But if you need to use it, it is ONLY a temp root and it NOT a substitute for unlocking your bootloader to obtain permanent root.
[GUIDE] How to unlock your bootloader, install TWRP and gain root access
https://forum.xda-developers.com/droid-turbo/general/guide-how-to-unlock-bootloader-install-t3292684
Again, read carefully, and if you have any questions then ask them in that thread.
ChazzMatt said:
This is the thread below you should start with. This thread you are posting in is from 3 years ago, with different firmware. "Moforoot" was only with Kitkat, and was BEFORE Sunshine bootloader lock came along (November 2015).
Read post #1 CAREFULLY of the thread below. You will need Sunshine ($25) to unlock your bootloader. Depending on the firmware version you are on (you left that out), you may need to use a powerful temp root tool to allow Sunshine to run properly. But if you need to use it, it is ONLY a temp root and it NOT a substitute for unlocking your bootloader to obtain permanent root.
[GUIDE] How to unlock your bootloader, install TWRP and gain root access
https://forum.xda-developers.com/droid-turbo/general/guide-how-to-unlock-bootloader-install-t3292684
Again, read carefully, and if you have any questions then ask them in that thread.
Click to expand...
Click to collapse
THanks so much for getting me in the right thread. I was busy these last days, and I'm new here, had no idea where to go........
BTW, I think u didnt understAND my question. I think I dont need to unlock bootloader, I might be wrong, but my question was which firmware I need to use. and I am in bootloop anyway, so i wonder if it is possible to download sunshine and how do i download sunshine in bootloop? (cant turn on mobile at all)
If u have any idea if anybody can figure out what firmware should i use, that would be the best help.
THanks
kr12 said:
THanks so much for getting me in the right thread. I was busy these last days, and I'm new here, had no idea where to go........
BTW, I think u didnt understAND my question. I think I dont need to unlock bootloader, I might be wrong, but my question was which firmware I need to use. and I am in bootloop anyway, so i wonder if it is possible to download sunshine and how do i download sunshine in bootloop? (cant turn on mobile at all)
If u have any idea if anybody can figure out what firmware should i use, that would be the best help.
THanks
Click to expand...
Click to collapse
The most recent stock Verizon Motorola Droid Turbo XT1254 firmware is here:
https://forum.xda-developers.com/showthread.php?t=3569334
I thought you wanted unlocked bootloader and TWRP. If not, just flash firmware from that thread.
You have to flash with RSDlite or ADB.
Sent from my official open market LG US998 V30+
kr12 said:
THanks so much for getting me in the right thread. I was busy these last days, and I'm new here, had no idea where to go........
BTW, I think u didnt understAND my question. I think I dont need to unlock bootloader, I might be wrong, but my question was which firmware I need to use. and I am in bootloop anyway, so i wonder if it is possible to download sunshine and how do i download sunshine in bootloop? (cant turn on mobile at all)
If u have any idea if anybody can figure out what firmware should i use, that would be the best help.
THanks
Click to expand...
Click to collapse
you do need the correct firmware to go back to stock or you will have the problem you are experiencing, since you arent sure which firmware you were on you could try the newest firmware and work backwards from there https://firmware.center/firmware/Motorola/Droid Turbo (XT1254)/Stock/
ChazzMatt said:
The most recent stock Verizon Motorola Droid Turbo XT1254 firmware is here:
https://forum.xda-developers.com/showthread.php?t=3569334
I thought you wanted unlocked bootloader and TWRP. If not, just flash firmware from that thread.
You have to flash with RSDlite or ADB.
Sent from my official open market LG US998 V30+
Click to expand...
Click to collapse
Thanks so much for the link. Thatss like something i was looking for. But i tried with that firmware and bunch of others, none of them worked. (I will list them)so can u pls specifically tell me which one i need based on the info i gave?
I would definitely love the unlocked bootloader and twrp (who wont) but i am in such position right now with not even a good firmware, cant go to recovery, dont have any apps installed, so right now i need like either just turning on the mobile or one on one help on the unlocking bootloader.
Thanks so much for replyinh.
---------- Post added at 05:08 PM ---------- Previous post was at 04:42 PM ----------
firmwares i used with no success
QUARK_VERIZON_6.0.1_MCG24.251-5_cid2_subsidy-1FF.xml
QUARK_VERIZON_6.0.1_MCG24.251-5_cid2_subsidy-DEFAULT_CFC.xml
QUARK_VERIZON_6.0.1_MCG24.251-5-5_cid2_subsidy-DEFAULT_CFC.xml
quark_verizon-user_LCF23.80_release-keys_firmware_upgrade_SVC.xml
VRZ_XT1254_KDF21.128-15_15_CFC_SVC.xml
VRZ_XT1254_SU4TL-44_44_CFC.xml
kr12 said:
Thanks so much for the link. Thatss like something i was looking for. But i tried with that firmware and bunch of others, none of them worked. (I will list them)so can u pls specifically tell me which one i need based on the info i gave?
I would definitely love the unlocked bootloader and twrp (who wont) but i am in such position right now with not even a good firmware, cant go to recovery, dont have any apps installed, so right now i need like either just turning on the mobile or one on one help on the unlocking bootloader.
Thanks so much for replyinh.
---------- Post added at 05:08 PM ---------- Previous post was at 04:42 PM ----------
firmwares i used with no success
QUARK_VERIZON_6.0.1_MCG24.251-5_cid2_subsidy-1FF.xml
QUARK_VERIZON_6.0.1_MCG24.251-5_cid2_subsidy-DEFAULT_CFC.xml
QUARK_VERIZON_6.0.1_MCG24.251-5-5_cid2_subsidy-DEFAULT_CFC.xml
quark_verizon-user_LCF23.80_release-keys_firmware_upgrade_SVC.xml
VRZ_XT1254_KDF21.128-15_15_CFC_SVC.xml
VRZ_XT1254_SU4TL-44_44_CFC.xml
Click to expand...
Click to collapse
That is part of the problem -- all those firmwares you tried to install. Each one has a certain version of bootloader and you cannot downgrade to older bootloaders. With locked bootloader, there's no way to downgrade to older firmware without bricking your phone. (There is a way with an unlocked bootloader, but that's not this discussion.)
1) this thread below is about using Sunshine to unlock your bootloader, and gives all the instructions. Furthermore, Sunshine dev has participated in that thread. Yes, part of the process (depending on firmware you are on) is to use a temp root to allow Sunshine to work. That's where it can get complicated. Sunshine costs $25.
[GUIDE] How to unlock your bootloader, install TWRP and gain root access
https://forum.xda-developers.com/droid-turbo/general/guide-how-to-unlock-bootloader-install-t3292684
2) If you don't want to do that then you need to just install the very latest firmware, not some older firmware. You can't downgrade to older firmware with locked bootloader. With a locked bootloader it will brick your phone trying to install older firmware. This is the newest Verizon Motorola firmware:
[FXZ] Official Stock Firmware 6.0.1 MCG24.251-5-5
https://forum.xda-developers.com/dr...-official-stock-firmware-6-0-1-mcg24-t3569334
Those are your only two options.
hello everybody
i have an lg g4 h811 running in lollipop 5 (h81110m build lmy47d) it's unlocked rom but not rooted
when i check for an update in the update centre it took me directly to apps update and there is no software update so i can't check for the update
if there is no solution but the manually update i want to know how and what should i do before update ( what i have to recover, do i need an sd card, what version of marshmallow is compatible, i want an official (stock) unlocked)
am not on t mobile operator so i need a rom which is already unlocked
thanks for helping me
elaid1988 said:
hello everybody
i have an lg g4 h811 running in lollipop 5 (h81110m build lmy47d) it's unlocked rom but not rooted
when i check for an update in the update centre it took me directly to apps update and there is no software update so i can't check for the update
if there is no solution but the manually update i want to know how and what should i do before update ( what i have to recover, do i need an sd card, what version of marshmallow is compatible, i want an official (stock) unlocked)
am not on t mobile operator so i need a rom which is already unlocked
thanks for helping me
Click to expand...
Click to collapse
mine was unlock am not on TMOBILE either. and i moved from LP to latest marshmallow using LGUP and KDZ file .. if you want to test marshmallow then go with 20i.. lollipop 10n and 20i are V2 antirollback. if you go latest 20o its V3 woull be stuck there.. so search for 20i KDZ and LGUP and flash it.
raptorddd said:
mine was unlock am not on TMOBILE either. and i moved from LP to latest marshmallow using LGUP and KDZ file .. if you want to test marshmallow then go with 20i.. lollipop 10n and 20i are V2 antirollback. if you go latest 20o its V3 woull be stuck there.. so search for 20i KDZ and LGUP and flash it.
Click to expand...
Click to collapse
thank you
links if possible ?
what about unlocking bootloader ? is it necessary & how to do it
i hope i shouldn't unlocke it again because i don't know how to do that (i want it to be in mm 20i unlocked rooted )
elaid1988 said:
thank you
links if possible ?
what about unlocking bootloader ? is it necessary & how to do it
i hope i shouldn't unlocke it again because i don't know how to do that (i want it to be in mm 20i unlocked rooted )
Click to expand...
Click to collapse
youll have to unlock bootloader .. actually thats how you unlock it gong into MM20i
theres all the info to unlock it and KDZ and LGUP.
http://forum.xda-developers.com/tmobile-g4/development/stock-h811-20i-images-kdz-flashable-t3308227
hello bought the imported lg g4 . using in india
hello i also have the same problem. i have the same T mobile lg g4 H811 10m version lollipop. my inbuit update centre is not working. i can update by above method manually but i fear my mobile hotspot wont work. i had sent it to my seller(ebay.in). They said that after updating hotspot wont work,so i said them leave it then(because for me hotspot is important). Actually i heard i US that they charge for mobile hotspot usage but in India mobile tethering & hotspot is free( i use airtel mobile).
so after updating it to marshmallow, how can i make the hotspot work on mobile?
i am a total beginner in this mobile world. So pls can anyone explain me very nicely & in simple way how to update it with mobile hotspot working?
---------- Post added at 07:08 PM ---------- Previous post was at 07:04 PM ----------
raptorddd said:
youll have to unlock bootloader .. actually thats how you unlock it gong into MM20i
theres all the info to unlock it and KDZ and LGUP.
http://forum.xda-developers.com/tmobile-g4/development/stock-h811-20i-images-kdz-flashable-t3308227
Click to expand...
Click to collapse
hey can u pls help me with this hotspot issue i have mentioned in my below post in this thread?
shreyam said:
hello i also have the same problem. i have the same T mobile lg g4 H811 10m version lollipop. my inbuit update centre is not working. i can update by above method manually but i fear my mobile hotspot wont work. i had sent it to my seller(ebay.in). They said that after updating hotspot wont work,so i said them leave it then(because for me hotspot is important). Actually i heard i US that they charge for mobile hotspot usage but in India mobile tethering & hotspot is free( i use airtel mobile).
so after updating it to marshmallow, how can i make the hotspot work on mobile?
i am a total beginner in this mobile world. So pls can anyone explain me very nicely & in simple way how to update it with mobile hotspot working?
---------- Post added at 07:08 PM ---------- Previous post was at 07:04 PM ----------
hey can u pls help me with this hotspot issue i have mentioned in my below post in this thread?
Click to expand...
Click to collapse
sorry i have not use hotspot ever.. so i cant help.. but make a new thread asking for that question.
issues with unlocking bootloader
raptorddd said:
sorry i have not use hotspot ever.. so i cant help.. but make a new thread asking for that question.
Click to expand...
Click to collapse
hey can u pls tell me how to unlock bootloader in my t mobile lg g4 h811 10m(its stock android 5.1)? I am fixed at this first step only......i am new to this developer thing, so i tried some but was unsuccessful to unlock. I will tell u what i tried.
i downloaded twrp img file & installed adb then ran cmd in twrp file location folder. i enabled usb debugging mode & oem unlock mode in developer options also. Then ran these steps
Code:
adb reboot bootloader (phone reboots to bootloader)
fastboot oem unlock (this wipes ALL data!!)
fastboot boot twrp-2.8.7.1-h811.img (phone boots TWRP)
BUT NOTHING HAPPENED. Pls anyone help me. i am fed up with this lollipop ****. In an era where people have reached Nougat,I am still there with lollipop ;-( (Actually i recently purchased this Lg g4 at a very cheap price. It was new one but i found that it was of USA carrier & i live in India. So basically i need to use this USA phone in India.
One more issue is there. This variant of LG g4 doesnt support Indian 4g band ( Band 40 aka 2300MHz). If u or anyone has solution for that then pls tell me also. How to run INdian 4g LTE band 40 in this phone which doesnt support it?
shreyam said:
hey can u pls tell me how to unlock bootloader in my t mobile lg g4 h811 10m(its stock android 5.1)? I am fixed at this first step only......i am new to this developer thing, so i tried some but was unsuccessful to unlock. I will tell u what i tried.
i downloaded twrp img file & installed adb then ran cmd in twrp file location folder. i enabled usb debugging mode & oem unlock mode in developer options also. Then ran these steps
Code:
adb reboot bootloader (phone reboots to bootloader)
fastboot oem unlock (this wipes ALL data!!)
fastboot boot twrp-2.8.7.1-h811.img (phone boots TWRP)
BUT NOTHING HAPPENED. Pls anyone help me. i am fed up with this lollipop ****. In an era where people have reached Nougat,I am still there with lollipop ;-( (Actually i recently purchased this Lg g4 at a very cheap price. It was new one but i found that it was of USA carrier & i live in India. So basically i need to use this USA phone in India.
One more issue is there. This variant of LG g4 doesnt support Indian 4g band ( Band 40 aka 2300MHz). If u or anyone has solution for that then pls tell me also. How to run INdian 4g LTE band 40 in this phone which doesnt support it?
Click to expand...
Click to collapse
first thing is you must be on 20i-20o firmeware... so flash using LGUP and KDZ 20i-20o ... at some point you would not be able to doengrade okey.. theres antirollback so if you want to be on LP and MM update to 20i MM this is antirollback V2 and lollipop 10n is V2 you can only switch between those 2.
if you go to 20o then thats V3 you are stuck there no more lollipop.. and if you so if you dont care about lollipop then i suggest to flash 20p thats the latest firmware it cameout like 1-2 weeks ago.
then you must place the twrp file image into the adb folder.. then once in twrp install image from sd card so when ever you boot into recovery you get to recovery this step is to enter recovery but its not installed on phone.
as fo bands i have no idea.. you also need to have phone sim unlocked to be used in india.. this is for unlocking bootloader and flash files roms ect.. not to unlock carrier.
Hey thanks for this detailed info but as i am completely new in this field i didn't understand some terms - what is V2,V3,anti rollback & KDZ?
& i tried using the LGUP + kdz thing but LGUP doesn't recognize my device. I tried all non rooted steps but it doesn't recognize my device. For LGUP to recognize my device i need to root it. But rooting again involves unlocking Bootloader which i can't figure out how to do.
So my main problem is how to unlock Bootloader of my t mobile lg g4 H811 10m?
---------- Post added at 06:03 PM ---------- Previous post was at 06:02 PM ----------
Hey but one more thing i didn't understand. Why people downgrade? Is Lollipop better than Marshmallow????
shreyam said:
Hey thanks for this detailed info but as i am completely new in this field i didn't understand some terms - what is V2,V3,anti rollback & KDZ?
& i tried using the LGUP + kdz thing but LGUP doesn't recognize my device. I tried all non rooted steps but it doesn't recognize my device. For LGUP to recognize my device i need to root it. But rooting again involves unlocking Bootloader which i can't figure out how to do.
So my main problem is how to unlock Bootloader of my t mobile lg g4 H811 10m?
---------- Post added at 06:03 PM ---------- Previous post was at 06:02 PM ----------
Hey but one more thing i didn't understand. Why people downgrade? Is Lollipop better than Marshmallow????
Click to expand...
Click to collapse
Marshmallow is way better than lollipop
Sent from my TegraNote-P1640 using XDA-Developers mobile app
shreyam said:
Hey thanks for this detailed info but as i am completely new in this field i didn't understand some terms - what is V2,V3,anti rollback & KDZ?
& i tried using the LGUP + kdz thing but LGUP doesn't recognize my device. I tried all non rooted steps but it doesn't recognize my device. For LGUP to recognize my device i need to root it. But rooting again involves unlocking Bootloader which i can't figure out how to do.
So my main problem is how to unlock Bootloader of my t mobile lg g4 H811 10m?
---------- Post added at 06:03 PM ---------- Previous post was at 06:02 PM ----------
Hey but one more thing i didn't understand. Why people downgrade? Is Lollipop better than Marshmallow????
Click to expand...
Click to collapse
V2 V3 are antirollback wich means you cant downgrade say if you used 20o kdz and you want to go back to lollipop you cant. because 20o its Version3 and lollipop its V2.
KDZ its the original friemware from LG
you dont need to be rooted.
care to explain steps you did exactly to LGUP.
LGUP cant see my mobile
raptorddd said:
V2 V3 are antirollback wich means you cant downgrade say if you used 20o kdz and you want to go back to lollipop you cant. because 20o its Version3 and lollipop its V2.
KDZ its the original friemware from LG
you dont need to be rooted.
care to explain steps you did exactly to LGUP.
Click to expand...
Click to collapse
I followed these steps mentioned in this thread http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
but lgup didnt see my mobile even though i followed mentioned steps. So they had another option, to see my mobile i had to do some changes in commands &that can be done only by rooting they( that thread) says. So to root first i have to unlock bootloader, which i am unable. I cant figure out why LGUP cant see my mobile. Is it because i am in India & mobile is of USA? Or maybe LGUP could access my location through my laptop? I just dont know? Hey is my mobile fake? Because when i opened my mobile i can see "made in South Korea" written on back side (when we remove battery)
shreyam said:
I followed these steps mentioned in this thread http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
but lgup didnt see my mobile even though i followed mentioned steps. So they had another option, to see my mobile i had to do some changes in commands &that can be done only by rooting they( that thread) says. So to root first i have to unlock bootloader, which i am unable. I cant figure out why LGUP cant see my mobile. Is it because i am in India & mobile is of USA? Or maybe LGUP could access my location through my laptop? I just dont know? Hey is my mobile fake? Because when i opened my mobile i can see "made in South Korea" written on back side (when we remove battery)
Click to expand...
Click to collapse
lg brand is korean... and are you on windows 10.? no if the phone isnt detected on LGUP theres something , maybe you dont have the right drivers it doesnt matter if you in india or anywhere else.. do a search and see if someone has had the sameproeblem i beleive ive seen this before i just dont know. but some where using windows 10... can you try in another computer and have the right drivers installed.
Yes i have latest version of Windows 10. Is there a problem with windows 10? I hadn't installed lg drivers at that time. Is installing lg driver necessary for lgup?
LGUP cant see my mobile
raptorddd said:
lg brand is korean... and are you on windows 10.? no if the phone isnt detected on LGUP theres something , maybe you dont have the right drivers it doesnt matter if you in india or anywhere else.. do a search and see if someone has had the sameproeblem i beleive ive seen this before i just dont know. but some where using windows 10... can you try in another computer and have the right drivers installed.
Click to expand...
Click to collapse
hey i have windows 10 & i installed lgunited driver but still lgup wasn't able to see my mobile.Do i had to install any other driver. Can u send the link of the driver? please help me with this. i want to update my phone badly.
shreyam said:
hey i have windows 10 & i installed lgunited driver but still lgup wasn't able to see my mobile.Do i had to install any other driver. Can u send the link of the driver? please help me with this. i want to update my phone badly.
Click to expand...
Click to collapse
try other computer w7.
Hi I am on same situation, i m from Delhi (India) having same G4 unit LP 811 10m. i am on windows 10 and my LGUP detect my phone without any problem. so my question is can i flash MM 20p or i need to flash MM 20i only? is it compulsory to unlock bootloader to do so?
HELP !!!!!
after update by LGUP phone is die black screen & don't start
it connect in pc as a QHSUSB_BULK what is this ?
where is the problem ????
raptorddd said:
try other computer w7.
Click to expand...
Click to collapse
Windows 7 is not possible as all of them whom i know have windows 10. I asked everyone, none of them had anything lower than Windows 10.
---------- Post added at 01:35 AM ---------- Previous post was at 01:30 AM ----------
dxavinash said:
Hi I am on same situation, i m from Delhi (India) having same G4 unit LP 811 10m. i am on windows 10 and my LGUP detect my phone without any problem. so my question is can i flash MM 20p or i need to flash MM 20i only? is it compulsory to unlock bootloader to do so?
Click to expand...
Click to collapse
Hey cheers on Diwali.
Can u give me the link from where you have downloaded lgup & which version of lgup you downloaded? Whether u had installed any drivers as well? From where u purchased your phone? I purchased this phone from ebay. Don't know why lgup is not able to detect my phone..... Any help?
dxavinash said:
Hi I am on same situation, i m from Delhi (India) having same G4 unit LP 811 10m. i am on windows 10 and my LGUP detect my phone without any problem. so my question is can i flash MM 20p or i need to flash MM 20i only? is it compulsory to unlock bootloader to do so?
Click to expand...
Click to collapse
flash 20p then install twrp. root if you want to run stock or just download custom rom and then flash it..
---------- Post added at 07:32 PM ---------- Previous post was at 07:31 PM ----------
shreyam said:
Windows 7 is not possible as all of them whom i know have windows 10. I asked everyone, none of them had anything lower than Windows 10.
---------- Post added at 01:35 AM ---------- Previous post was at 01:30 AM ----------
Hey cheers on Diwali.
Can u give me the link from where you have downloaded lgup & which version of lgup you downloaded? Whether u had installed any drivers as well? From where u purchased your phone? I purchased this phone from ebay. Don't know why lgup is not able to detect my phone..... Any help?
Click to expand...
Click to collapse
try it in anothers people computer..
im ON H811 10m I WANNA ROOT N INSTALL TWRP ON 10m ANDROID 5.1 IM EXHAUSTED HELP!! can't reboot in bootloader "adb reboot bootloader" in terminal just reboot android so no root or twrp n someone on xda said upgrading 10m to 20i in download mode brick your device
Lg drivers are installed correctly in on win 8.1 2.0 port mtp mode work but LGUP n LGMobile Support Tool only recognize device in download mode Usb Debug n OEM Unlock is ticked
LINK Bricked10m
Aemyiam said:
im ON H811 10m I WANNA ROOT N INSTALL TWRP ON 10m ANDROID 5.1 IM EXHAUSTED HELP!! can't reboot in bootloader "adb reboot bootloader" in terminal just reboot android so no root or twrp n someone on xda said upgrading 10m to 20i in download mode brick your device
Lg drivers are installed correctly in on win 8.1 2.0 port mtp mode work but LGUP n LGMobile Support Tool only recognize device in download mode Usb Debug n OEM Unlock is ticked
LINK Bricked10m
Click to expand...
Click to collapse
root can be on locked bootloader on 5.1 only using rooted system.img
10n and 20i antirollback V2. you can flash this 2 if you stay there.. 10 is lollipop and 20i is MM.
20o-20p-20q-and latest 20R is antirollback V3 you can switched to any onf this once you flash 20o or higher.
you cant unlock bootloader if you are in lollipop.
you need to be on 20i and do the procedure.
raptorddd said:
root can be on locked bootloader on 5.1 only using rooted system.img
10n and 20i antirollback V2. you can flash this 2 if you stay there.. 10 is lollipop and 20i is MM.
20o-20p-20q-and latest 20R is antirollback V3 you can switched to any onf this once you flash 20o or higher.
you cant unlock bootloader if you are in lollipop.
you need to be on 20i and do the procedure.
Click to expand...
Click to collapse
20i procedure will brick my device in on 10m read the first post n the link ive posted kingoroot fail n stump root said your device is patched so idk i dont wann brick my new lg g4
Aemyiam said:
20i procedure will brick my device in on 10m read the first post n the link ive posted kingoroot fail n stump root said your device is patched so idk i dont wann brick my new lg g4
Click to expand...
Click to collapse
no it wont... didnt you read what i posted.? 10n-20i V2. how can you brick in same antirollback.
now 20o-p-q-and r are V3.. NOW V3 to V2 yes hard brick. from 20o to 20i and lower brick.
didnt you see he says hes phone says is a sprint..
(when upgrading i've seen an ls991zv6 i don't know)
either hes board is not h811 tmobile and flashed a h811 kdz to sprint phone..... or he has a h811 and flashed a sprint kdz..
i have not seen this on G4 in G2 yes alot of places would say it was d800. in stickers and all but the motherboard were replaced with anothe variant. so a phone put up togethe of othe phones parts..
then if you dont trust me then i cant help you...
@MicroMod777 care to explain to this guy..
raptorddd said:
no it wont... didnt you read what i posted.? 10n-20i V2. how can you brick in same antirollback.
now 20o-p-q-and r are V3.. NOW V3 to V2 yes hard brick. from 20o to 20i and lower brick.
didnt you see he says hes phone says is a sprint.. .
@MicroMod777 care to explain to this guy..
Click to expand...
Click to collapse
what if i have the same board? cuz i bought it from the same seller on ebay i guess and ik about v2 v3 antirollback thing but if i got it brick how would i go back to 10m? do you have link of stock 10m? i found some images for 10n and the 10h but nothing about the 10m
Aemyiam said:
what if i have the same board? cuz i bought it from the same seller on ebay i guess and ik about v2 v3 antirollback thing but if i got it brick how would i go back to 10m? do you have link of stock 10m? i found some images for 10n and the 10h but nothing about the 10m
Click to expand...
Click to collapse
well... here am not so sure.. like i said in LG G2 there were franken phones made from different parts of other variatns.. but the motherboard was the one to pay attention to. the only way was to open phone and read the motherbard. as they could edit the numbers in software but not on print in motherboard.... this is so odd tough i have not heard this on G4... likei said i dont know what the other guy did. did he downloaded a wrong KDZ.? of did he had right KDZ and motherboard not matching H811. ??? only way is to read the model name number in motherboard..
i dont know... when i got my phone it had 10n lollipop.. never seen m or h. i know theres kdz in a page but i have never use..
a lil bit conversation over here about same topic https://forum.xda-developers.com/tmobile-g4/help/q-how-to-upgrade-to-marshmallow-manually-t3476295/post69467849#post69467849 but its until unsolved mystery.
raptorddd said:
well... here am not so sure.. like i said in LG G2 there were franken phones made from different parts of other variatns.. but the motherboard was the one to pay attention to. the only way was to open phone and read the motherbard. as they could edit the numbers in software but not on print in motherboard.... this is so odd tough i have not heard this on G4... likei said i dont know what the other guy did. did he downloaded a wrong KDZ.? of did he had right KDZ and motherboard not matching H811. ??? only way is to read the model name number in motherboard..
i dont know... when i got my phone it had 10n lollipop.. never seen m or h. i know theres kdz in a page but i have never use..
Click to expand...
Click to collapse
he flashed 20i ( (h81110m build lmy47d)
after upgrading it with LGUP + kdz img file H81120i_00_0201 (to mm) ) his build # is same as mine..... my board is msm8992 does it matches with yours or its fake hardware... @MicroMod777 H811 One Click TWRP will this method work on 81110m?
dxavinash said:
a lil bit conversation over here about same topic https://forum.xda-developers.com/tmobile-g4/help/q-how-to-upgrade-to-marshmallow-manually-t3476295/post69467849#post69467849 but its until unsolved mystery.
Click to expand...
Click to collapse
i see. i was helping there as well. but since i have not had USBHBULK and since then there was no way to fix. i see now they have some thread about unbricking.
i had that same brick on LG G2 but running KDZ. fix it on G2.. i think here is a different way with G4.
i wonder if that is the same situation. changed motherboard. and am not really sure if motherboards can be use in different variants.. only way is to physically see it.. but since you have warranty. then you are good.
---------- Post added at 11:46 PM ---------- Previous post was at 11:34 PM ----------
Aemyiam said:
he flashed 20i ( (h81110m build lmy47d)
after upgrading it with LGUP + kdz img file H81120i_00_0201 (to mm) ) his build # is same as mine..... my board is msm8992 does it matches with yours or its fake hardware... @MicroMod777 H811 One Click TWRP will this method work on 81110m?
Click to expand...
Click to collapse
am puzzled... i know in G2 they did that.. so could that be the case here.??
that doesnt help.. that app.
as i already told you. in G2 they can change IMEI and model number.. outside of phone would be a at&t housing then removing phone apart would show other model number for behind battery housing.. so they can edit software it could say d800 in about phone and version , ect d800 housing . but motherboard would be sprint...
guys am just sharing what i have seen in G2.. am not saying its same way.. its just my opinion and my toughts . what else could it be.??
nooo that program does not help. they can edit software info.. but not motherboard printed model.. what am saying is.. to make sure you have a real h811 in case they are building phones from other variants.
is to open phone and physically see the motherboard printed number.
read this..
https://forum.xda-developers.com/lg-g2/general/warning-to-people-bought-phones-ebay-t2991195
raptorddd said:
i see. i was helping there as well. but since i have not had USBHBULK and since then there was no way to fix. i see now they have some thread about ebay-t2991195[/url]
Click to expand...
Click to collapse
MY lg g4 is original just checked the imei http://www.imei.info/ i tried G4 H811 One Click TWRP method and it worked twrp successfully installed then i flashed chainfire supersu zip and rooted
THANKS FOR HELP PROBLEM SOLVED
Aemyiam said:
MY lg g4 is original just checked the imei http://www.imei.info/ i tried G4 H811 One Click TWRP method and it worked twrp successfully installed then i flashed chainfire supersu zip and rooted
THANKS FOR HELP PROBLEM SOLVED
Click to expand...
Click to collapse
you should not give your imei out to public..
then you should not have a problem updating to 20i.
Hi,
Is it possible to flash US Cellular V405UA kdz to Sprint V405UA?
I tried but I am getting error "Error: not support diagEnable for laf mode".
I managed to flash it using LGUP and using Refurbished option, but now I got the network locked. Is it possible to unlock it back?
caquito07 said:
I managed to flash it using LGUP and using Refurbished option, but now I got the network locked. Is it possible to unlock it back?
Click to expand...
Click to collapse
Wait, LGUP works now?? How did you do it??
Why not just flash it to the us unlocked version? Maybe try that firmware to see if it'll still be locked.
yes please let me know
pp342261 said:
Wait, LGUP works now?? How did you do it??
Why not just flash it to the us unlocked version? Maybe try that firmware to see if it'll still be locked.
Click to expand...
Click to collapse
I want to know let me know also
caquito07 said:
I managed to flash it using LGUP and using Refurbished option, but now I got the network locked. Is it possible to unlock it back?
Click to expand...
Click to collapse
share your LGUP config man
I used the dev modified LGUP and dll, and used the refurbish option. The phone got flashed however it is locked now, when I put the sim it says Network Locked.
PD. If u need the modified lgup and dll let me know.
caquito07 said:
I used the dev modified LGUP and dll, and used the refurbish option. The phone got flashed however it is locked now, when I put the sim it says Network Locked.
PD. If u need the modified lgup and dll let me know.
Click to expand...
Click to collapse
Yeah, could you send it?
hi lg up
caquito07 said:
I used the dev modified LGUP and dll, and used the refurbish option. The phone got flashed however it is locked now, when I put the sim it says Network Locked.
PD. If u need the modified lgup and dll let me know.
Click to expand...
Click to collapse
You can upload LG up file and your dll has successfully flashed your v40
caquito07 said:
I used the dev modified LGUP and dll, and used the refurbish option. The phone got flashed however it is locked now, when I put the sim it says Network Locked.
PD. If u need the modified lgup and dll let me know.
Click to expand...
Click to collapse
Yes upload the ones you are using please and that way we can probably flash the US Unlocked Firmware and probably get Pie before Sprint officially does ._.
Sent from my LG V40 using XDA Labs
PjLyTam said:
You can upload LG up file and your dll has successfully flashed your v40
Click to expand...
Click to collapse
I used the LGUP and dll from https://forum.xda-developers.com/showpost.php?p=76510671&postcount=168.
Guys, I am no expert, so please be careful. I am not responsible for any bricked phones.
caquito07 said:
I used the LGUP and dll from https://forum.xda-developers.com/showpost.php?p=76510671&postcount=168.
Guys, I am no expert, so please be careful. I am not responsible for any bricked phones.
Click to expand...
Click to collapse
Really the one from the V30 forums????
Sent from my LG V40 using XDA Labs
Still getting the same error to use latest dll
caquito07 said:
I used the LGUP and dll from https://forum.xda-developers.com/showpost.php?p=76510671&postcount=168.
Guys, I am no expert, so please be careful. I am not responsible for any bricked phones.
Click to expand...
Click to collapse
The patched version with that dll throws an error though (same one basically as the LG UP 1.15 cmd version does)
It tells you to use the latest .dll, because the LAF version on the device doesnt match the one from the .dll. And when trying any other .dll (G7, V40 Oreo (V405EBW 10f), or V40 Pie (V409N20c KT)) the .dll isnt recognized as matching (LG UP Cmd says it cant read the dll format, and that you have to install a proper one)
So how exactly did you do this?
I did it using the Refurbish option, the Upgrade option failed, but the Refurbish completed the flash.
so u didnt do anything to the dll in particular? You just downloaded it and it worked?
all i'm getting is fails .-.