Display unresponsive while charging *solved, please delete* - Galaxy S I9000 Q&A, Help & Troubleshooting

*Hey guys!
So I'm switching over to using a GT-I9000 for a few weeks, while my 1+3T arrives. To ease my pain, I formatted this phone (after God knows how long it's not been used), and tried flashing a few ROMs.
While doing so, I noticed something really strange: When I plug the phone in to charge (or to my PC for that matter), the screen thinks I'm constantly holding one of my fingers on the screen, thus making it unresponsive to touch while plugged in. As soon as I disconnect the phone, the screen starts working fine again.
Any ideas how to solve this problem?*
Okay, nevermind, found out the cause, please delete the thread.

Related

Diamond don´t turn on

Guys, i have a Diamond, but, yesterday the diamond turn off, and don´t turn on, i tried to do a soft and hard reset and nothing, i tried to enter in bootmode and nothing, when i put the battery the screen turn on, and the diamond vibre, but nothing else, what i can do??
rmorera84 said:
Guys, i have a Diamond, but, yesterday the diamond turn off, and don´t turn on, i tried to do a soft and hard reset and nothing, i tried to enter in bootmode and nothing, when i put the battery the screen turn on, and the diamond vibre, but nothing else, what i can do??
Click to expand...
Click to collapse
what did you do *before* your diamond stopped turning on?? unless you had a completely unpredicted system meltdown of your diamond for injecting it with super high voltage. it is rare for it to not power off unless you did something ... so please elaborate so we can assist better.
Ok, yesterday i use the phone like anothe normal day, in the night i turn off the phone, and in the morning, when i tried to turn on, i have this problem, for example, when a tried to do a soft, hard reset, the screen is in black, when a conect the phone to the usb the screen is black, is, i left the phone alone, in 3 minutes the black screen again, i don´t know why.
any LED activity when plugged into USB?
I think it is a major manufacture problem
I had the same problem, taking out the battery waiting a while and inserting it back, will solve the problem for some time but it will happen again.
Finally I sent it to the HTC support center.
I don't understand why HTC didn't recall.
If you'll search this forum you'll see the same problem in different stages, some times it's a blank screen but the phone will ring and some are just freeze.
Hi, I've had my Diamond for about a month soon and it started earlier this week by not wanting to come on at all. Been taking out the battery for a few days but eventually got fed up and did a hardware reset tonight. Not long after that it just suddenly turned itself off and I couldn't get it back on again. I thought I'd pack it back into the box it came in and send it back tomorrow and took out the sim card. After that it came to life again.
Happened to get a call after that and that call was suddenly disconnected without any reason.
So I am not very happy with this phone at the moment. Would appreciate any advice or if you know for sure it can't be sorted maybe I should send it back and ask for another one?
Blazeitup123 said:
any LED activity when plugged into USB?
Click to expand...
Click to collapse
Nothing, but one time the pc detect the phone, but later nothing.
No Led activity either on mine when it went dead.
When the Phone goes dead, try cooling the phone down as much as possible, and try starting it up again.....
There is a problem with the HTC Diamond in that it can cook itself (excessive heat), due to the auto over temp function crashing and not switching off the phone..... (That's what I have been told at least...)
I know over around 5 Diamonds so far that have had this issue, where the symptoms slowly get worse...
Have a look at this thread....
http://forum.xda-developers.com/showthread.php?p=2905775#post2905775
PLEASE P.M. me if you have any of the symptoms described in the thread...
I have been TRYING to get my Diamond fixed under warranty now for 2 months with little success... And I kinda need to know how wide spread this problem is to proceed any further.
could not turn on after blank screen ...
Hello,
I've had the same issue as rmorera, and after I hard reseted the phone all went o.k.. BUT after I reinstalled part of the small apps I use, the phone started to go off again. So, the problem seems to be in the software ...
I believe the cause might be the SRS WOW which I use. I installed the .cab, then the .reg file provided (ufortunatelly I don't remember from which thread I got the files ...). And shortly after, the phone stopped working. I uninstalled the software, and now it works! Could it be that the SRS WoW did this?
I tried to reinstall the SRS WoW and I found that if enabled for "Internal (Stereo)" instead of "Headphones" it gets my phone shut when the WM blanks the screen. If I select the "Headphones" options the issue seems to disappear.
Still, the SRS WoW damages the volume buttons action, but I think this issue is on another thread ...

Strange (and a little worriesome) behavior on my G1

Tonight my G1 displayed some very odd behavior. It was running normally and I pressed the power button to make it sleep and I set it aside. About half an hour later I picked it up and tried to turn it on by pressing menu. The phone gave no response other than lighting up the five buttons on the bottom. I tried sliding the keyboard out and the keyboard lit up as well, but the display remained black. Plugging it in via USB to my computer did absolutely nothing (no sounds, no notification light, etc.), and I got the same result when I plugged it into the charger. I finally decided to take the battery out in order to turn the phone off, and then put it back in and pressed the power button. The phone booted up normally, and now everything seems to be working in proper order. I am slightly concerned, however, as I have never had this behavior in the year that I have owned my G1. I am running Cyanogen 4.1.999 with the Hard SPL boot loader. I am unsure whether this behavior has anything to do with the mod and I am wondering if anyone else has experienced anything similar. I do realize that if my phone is bricked it is my fault, and I want to determine if this was simply a freak accident or if I need to do something differently with the phone.
first of all if your phone was bricked you wouldn't be able to use it. as for your problem it doesnt sound too serious so if i were you i wouldn't worry about it. but if it does happen again reflash your phone and if it happens after that, pitch it to cyanogen to see if there is a problem with the rom.
I do realize that it isn't bricked now, but I am worried that this behavior could mean that I am pushing the phone too hard. I am mostly curious as to whether or not anyone else has experienced similar behavior from their G1.
Turn off compatibility mode in spare parts.
don't worry this is a common problen It happens to me all the time any hero I flash plays nice for about a day. and then boom no problems with cyan!
I had the same problem, but unfortunately my G1 is still not working properly.
In the morning, turning off the alarm I left the phone for 5 minutes. An attempt to turn it on did not work: there was no reaction on display, although the buttons were lighting up. I restarted phone taking the battery out and now I have following:
- keyboard fully closed: no reaction/black display, buttons are lighted up
- keyboard open: I can do everything: change ROM/make call/write messages/Internet/GPS/... - everything what is possible to do with rooted G1
- keyboard partially open (visible only lowest row with such buttons as ALT, SHIFT, SPACE): similar to 'open' but with changed orientation
Can anyone help/advise? Did almost everything: ROM changed, full wipe, recovery

[Q] HELP! SGS doing funny things - USB connected

Really need help guys. My SGS is doing REALLY funny things...
I just got my SGS a few days ago and so far all I've been doing is installing aps on it (no messing with rooting/flashing).
Today, I was trying to get Keis to work. I reinstalled Keis and unplugged and repluggeed my phone a few times and managed to get it to recognise.
Here's the problem, now it ALWAYS says USB connected on the top left hand corner. Everything seems ok except after a few minutes of the screen turning off, I can't turn it back on again. Absolutely no activity. If I try to turn it back on immediately after it goes off, it can come back on again.
Things get weirder. If I remove my battery or turn it off, I can't turn it back on again (it flashes a loading symbol in the middle of the screen for half a second then nothing happens). To turn it back on, I have to plug it in and wait for the charging screen to come on. THEN it comes on.
I've tried doing a factory reset but nothing changed... Is there a hardware fault? Perhaps flashing will solve the problem?
ps. When it's off, I can enter download mode but not recovery more unless I plug it in...
Sounds like a hardware problem on phone, But I beleive its more of a Grounding problem with your usb. Can you try it with another port or computer? Also does your pc/laptop have a grounding pin for its power supply? I noticed I get odd power spikes when I travel to asia as their power is not always good. You can always buy a surge protector for your computer and one for your samsung charger. Other then that see if you can get new KIEs (I Don't EVER use it as its crap and never reconizes my phone)
Also if you want to kick up a storm, get the thing replaced as it sounds like a phone hardware problem as it should not crash when you take battery out. Could be battery but better to change the whole thing.
Try activating USB DEBUG in settings. Check the option and restart.
It should solve the problem. You can UNCHECK again the option and the phone should work also without USB debug activated
It will happen again, it seem to me a problem with some USB port, or some cables, activating a *waiting for USB* option BEFORE the ROM loading
Thanks
Thanks for the advice guys. Last night it suddenly started behaving itself after the 10th or so hard reset *phew*
Very strange problem and I think I will stay well clear of Kies from now on... Samsung make a good phone but lousy software...
josephlck said:
Thanks for the advice guys. Last night it suddenly started behaving itself after the 10th or so hard reset *phew*
Very strange problem and I think I will stay well clear of Kies from now on... Samsung make a good phone but lousy software...
Click to expand...
Click to collapse
I have a desire but the samsung daily briefing app, the media player, .... and my desire has some HW problems too

Problem with Droid 1

I’m using CyanogenMod 7.0.3-Droid. After using the phone for a while the icons on the screen start moving back and forth very rapidly and start randomly launching apps. The phone becomes unstable and I have to press the on/off button to get the phone working normally again but it only lasts a short time and starts over again. Any ideas?
Sounds like a broken digitizer (touch screen)
Try flashing back to stock - but I doubt it's a software ploblem
One question though: was the phone connected to an AC charger when this occured?
I think it is a broken digitizer. I flashed back to the stock rom and two others and it still does the same thing. I didn't matter if it was charging (OEM charger) or not, it stillwas acting up. Thanks for the reply.

[Q] G1 weirdly semi bricked

I don't use my G1 anymore, but I'd like to get some ics on it for ****s and giggles. Unfortunately the phone seems to have forgotten how to work.
I was happily running CM 5.0.7 or somesuch a while ago, when it decided to just power off and not turn back on. After pressing the power button many times it magically came on again... for 15 minutes. This went on for a while before it flat out wouldn't turn on at all. I thought it was the battery, so I got a new battery. This didn't help.
So I put the phone on a shelf, got a new phone and forgot about it for a long time. Then one day I got curious. I plugged it in and sure enough the orange light turned on. After it fully charged, I booted it up and put whatever the news CM version was.. 6 maybe? Anyway all was good, for about an evening. I pulled the battery and put it back on the shelf. Now that ICS is out for it, I'd like for this phone to work again. I just plugged it in and let it sit. The LED never came on. I hit the power button and nothing happened. Then I unplugged it and then all the backlights on the buttons came on. If I press the power button all the backlights turn off as long as I am pressing. The second I take my finger off all the backlights come back on. The screen and LED haven't even come close to coming on.
Does anyone have any idea what's up?
PS. I just want to clarify, I never bricked it in a conventional sense. The ROM worked fine as long as it was powered up. I could reboot it and everything.
thats happening to my old g1 too...still dont know how to fix it or whats wrong with it =[
Probably a loose or broken cable
My old G1 also got messed up because of a broken screen cable.
This sounds like the cable connecting the smaller board with the buttons and usb to the motherboard
i guess i'll open it up and see if anythings wrong =p

Categories

Resources