Related
i have a motorola droid and it is rooted.i flashed a new rom and then i flashed sprecovery,i let it run its course and i disconnected the phone.when the phone turns on it starts up and then a red light comes on and my phone says please connect charger.it keeps saying android process is not responding and then the phone shuts itself off.ive tried to boot it into recovery mode and do a restore,it keeps giving me an error that says nandroid exited with status 20 and its also not reading my sd card.can somebody tell me whats happened and if it can be fixed???please and thank you
Well, seems as if you need to reflash or restore because of bad flash. If you try flashing again make sure you wipe data and cache. As far as not reading sdcard I have same problem not sure why but when I'm in recovery and I choose install zip which I used clockworkmod recovery, if it fails then it reboots automatically after couple seconds not sure if this happens with sprecovery. After sdcard mount fail it shuts down and reboots so before it reboots I pull the battery and wait a minute or two before trying again. It may take me 3 to 4 times of doing this but eventually it will mount sdcard in recovery. I recommend keep trying till it allows you to apply recovery file and then flash to either clockworkmod or sprecovery which ever one you not using and then flash back to the one you want. I'd also recommend try if after all this you flash rom again and same thing happens redownload it and try again. Good luck.
Sent from Droid using, Sapphire v1.0.0/ 928Droid Black Glass 2.2 Theme/ Sholes 1.0 Ghz 7 Slot Kernel.
Please install Advanced Task Manager and from the setting use what ever setting that might suite you.
For me i use the following setting:
Auto Kill Level --> Safe
Auto Kill Frequecny --> Every One Hour
Security Level --> Meduim
With the above setting, i didn't face any performance problem and reduced reboot frequency (General Problem in the Android).
Feel free to ask any question and I will be ready for you
fadimck said:
Please install Advanced Task Manager and from the setting use what ever setting that might suite you.
For me i use the following setting:
Auto Kill Level --> Safe
Auto Kill Frequecny --> Every One Hour
Security Level --> Meduim
With the above setting, i didn't face any performance problem and reduced reboot frequency (General Problem in the Android).
Feel free to ask any question and I will be ready for you
Click to expand...
Click to collapse
Please note, that there have been wide reports of people having issues with various task killer apps consuming excessive amounts of battery life when used on a Droid with Froyo.
Please install Advanced Task Manager and from the setting use what ever setting that might suite you.
For me i use the following setting:
[*]Auto Kill Level --> Safe
[*]Auto Kill Frequecny --> Every One Hour
[*]Security Level --> Meduim
With the above setting, i didn't face any performance problem and reduced reboot frequency (General Problem in the Android).
Feel free to ask any question and I will be ready for you
Click to expand...
Click to collapse
Please note, that there have been wide reports of people having issues with various task killer apps consuming excessive amounts of battery life when used on a Droid with Froyo.
Click to expand...
Click to collapse
Okay, I didn't know this info as I've Milestone with stock OS 2.1
Sent from my Milestone using XDA App
This is place where you can come and ask questions regarding support as well as any other general discussion for the Null rom. Please keep the development thread to just that DEVELOPMENT. The developer of this rom is here to develop and not here to answer your questions because you can't take the time to figure out the answer yourself. This will be a community driven thread. Therefore, if you feel something needs to be added to the OP please mention me in a post and I'll take a look
If you need to download the rom free to stop by the dev thread to download. However, if I see you ask a question in here and then go to that thread to ask the same question I will be handing out infractions. Please consider this your only warning.
On a side note, I'll be transferring the OP of this thread to a person with this device in due time. However, for the moment this needed to be created. If you are willing to take the OP from me please feel free to send me a PM. The only requirement that I would have is that you keep it updated properly.
FAQ / IT DOESNT WORK ! WAH
INTERNET ACCESS
GO INTO "FULL SETTINGS -> BLUETOOTH -> SELECT YOUR PHONE SETTING ICON (ON THE RIGHT OF PHONE NAME) -> TICK INTERNET ACCESS".
ENSURE BLUETOOTH TETHERING IS ENABLED ON YOUR PHONE BEFORE HAND OBVIOUSLY.
*NOTE* ENSURE YOUR MOBILE DEVICE SUPPORTS TETHERING, US VARIANT PHONES HAVE RESTRICTIONS INPLACE. REFER TO THE US INTERNET TETHERING THREAD.
*NOTE 2* BLUETOOTH TETHERING DOES NOT AUTO RECONNECT, INSTALL THIS THIRDPARTY SOLUTION ON YOUR GEAR TO ENABLE AUTO RECONNECT.
PLAYSTORE / GOOGLE ACCOUNT MANAGER HAS STOPPED..
VERIFY YOU HAVE A BLUETOOTH INTERNET TETHERING CONNECTION ESTABLISHED BEFORE ATTEMPTING TO ADD A GOOGLE ACCOUNT.
MUST NOT BE USING THIRD PARTY TETHERING, EG. PDANET.
HOW DO I FULL WIPE?
BOOT INTO RECOVERY MODE AND SELECT THE "RECOVERY" OPTION. DO THIS AFTER FLASHING THE ROM
UNABLE TO WAKE GEAR WHILE IN PHONE CALL
THIS IS CAUSED BY THE HOME BUTTON REMAP MOD, THE HOME BUTTON MUST BE PRESSED IN ORDER TO WAKE THE GEAR UP IN THIS STATE.
ONLY WORK AROUND IS TO EITHER USE THE WRIST WAKEUP GESTURE OR DISABLE THE HOME BUTTON REMAP MOD.
*NOTE* BY DISABLING THE HOME BUTTON REMAP MOD, THIS WILL DISABLE THE ABILITY TO MANUALLY LOCK THE SCREEN WHILE USING A CUSTOM LAUNCHER.
DOUBLE TAP BRIGHTNESS/SOUND TOGGLE HAS DISAPPEARED
THIS IS CAUSED BY USING THE FULL SYSTEM UI, SIMPLY PUT IT REPLACES THE DOUBLE TAP WINDOW WITH THE NOTIFICATION SHADE. BY USING GRAVITYBOX YOU CAN ADD ADDITIONAL TOGGLES LIKE BRIGHTNESS & SOUND TILES TO THE FULL NOTIFICATION SHADE.
OTHERWISE SIMPLY REFLASH THE ROM WITH THE FULL SYSTEMUI OPTION UNTICKED.
SCREEN FLICKERING/GITTERING
THIS IS CAUSED BY THE INITIAL BOOTUP, REBUILDING THE CACHE AND INITIALIZING ALL THE APPS. GIVE YOUR GEAR A FEW MINUTES TO SETUP AND RESTART.
SCREEN UNLOCKS TO NOVALAUNCHER PAGE PREVIEW?
GO INTO "NOVA SETTINGS -> GESTURES -> HOME BUTTON -> NONE".
ENABLE DEVELOPER SETTINGS / USB DEBUGGING
GO INTO "SETTINGS -> GEAR INFO -> ABOUT GEAR", TAP SOFTWARE VERSION 10 TIMES.
ENABLE UNKNOWN SOURCE APK INSTALLATION
GO INTO "FULL SETTINGS -> SECURITY -> TICK UNKNOWN SOURCES".
ENABLE MTP
GO INTO "FULL SETTINGS -> STORAGE -> MENU BUTTON (TOP RIGHT OF SCREEN) -> USB COMPUTER CONNECTION -> MEDIA DEVICE (MTP)".
WATCH STYLER NOT WORKING
ENSURE ITS SELECTED AS THE DEFAULT WATCHFACE IN GEAR MANAGER.
IF CLOCK FACE DOES NOT UPDATE UPON CHANGING, RESTART GEAR.
DOUBLE CLICK HOME BUTTON DOESNT WORK ON TOUCHWIZ LAUNCHER !
*NOTE* DO NOT DO THE FOLLOWING IF YOU ARE USING NOVALAUNCHER, YOU WILL NOT BE ABLE TO MANUALLY LOCK YOUR GEAR.
*NOTE 2* YOU CAN SIMPLY REFLASH THE ROM WITHOUT WIPING AND DISABLE THE HOME BUTTON REMAP MOD.
NAVIGATE/PULL THE FOLLOWING FILE FROM YOUR GEAR: /SYSTEM/USR/KEYLAYOUT/GPIO-KEYS.XML
EDIT IN A TEXT EDITOR SO IT LOOKS LIKE THE BELOW:
Code:
key 115 VOLUME_UP WAKE
key 114 VOLUME_DOWN WAKE
key 116 POWER WAKE
[B]key 172 HOME WAKE[/B]
edit
Amazing. This thread is very much needed song as how the dev thread keeps getting cluttered with posts that wouldn't be there if some one would have read
sent from my Note 3 or Galaxy Gear
Yeah this thread is an awesome idea to leave the general discussion and support issues out of the other thread.
Whenever I select "recovery" it doesn't give me an option to install the rom?
I followed the steps for the root and the add the .zip to my SD card on the phone. When I select the option for recovery it just does a system restore on it. Any help?
You need to flash twrp first
sent from my Note 3 or Galaxy Gear
feature request
[what about to include support fpr AquaMail client?
I'm using it and I think it is the better at the moment
The developer could be interesting....
Just a quick (somewhat noob) enquiry about the Gear and what this ROM can do for it, as I'm thinking of picking up a Note3 + Gear from work (Vodafone), as the watch is free.
Firstly, I hate Touchwiz with a passion! I don't wish for anyone to read that in an angry way, but I'm really not fond of the colours, themeing, etc. of that particular UI. I much prefer vanilla Android and, as such, would look to root the Note3 and install CM or an equivalent on it.
Would I then lose any functionality of the Gear? Can the GearManager APK be installed on a non-TW ROM?
I'll need a bit of an idiot's guide for the whole thing, but it's nothing I can't research.
Pepski said:
Just a quick (somewhat noob) enquiry about the Gear and what this ROM can do for it, as I'm thinking of picking up a Note3 + Gear from work (Vodafone), as the watch is free.
Firstly, I hate Touchwiz with a passion! I don't wish for anyone to read that in an angry way, but I'm really not fond of the colours, themeing, etc. of that particular UI. I much prefer vanilla Android and, as such, would look to root the Note3 and install CM or an equivalent on it.
Would I then lose any functionality of the Gear? Can the GearManager APK be installed on a non-TW ROM?
I'll need a bit of an idiot's guide for the whole thing, but it's nothing I can't research.
Click to expand...
Click to collapse
No. Sadly not.
Or at least not with all the bells and whistles working.
I actually am testing CM11 on my note 3 as I type. I was wondering if someone could link me to the latest gear manager so I could test how it works.
Sent from my Note 3 w/ CM11
ktetreault14 said:
I actually am testing CM11 on my note 3 as I type. I was wondering if someone could link me to the latest gear manager so I could test how it works.
Sent from my Note 3 w/ CM11
Click to expand...
Click to collapse
Here's 2 versions. The latest and the previous one, a lot of people are having problems with the latest, and even Samsung supposedly admitted it was bugged and they were going to release a new one. The previous version seems to work fine for people, and there's no real functional updates on the latest one anyway, so you might prefer it.
Latest version - 1.5.121601
Previous version - 1.5.120903
I couldn't get cm11 to download the necessary apks for gear manager so I restored a tw backup and backed up the apks themselves. When I went to restore them the only ones that would not restore were the weather and svoice. It is paired now with gear manager running in the notifications. Still testing out what works and what doesn't
Sent from my Note 3 w/ CM11
Running 16, removed Ms. Pac-Man for running too slow on the Gear, everything's running smooth.
Sent from Spaceball One.
I have nexus 5 rooted and running null16, could anyone please point me out how to make gear manager to work?has anyone made notifications work? so far i can just make calls from it and syncs the time.I have read everywhere but nothing works so far and i can't seem to find a reliable sorce of information. If we could make something like an app and null to be modified to work with that so we lose gear manager dependency i belive that would be a game changer . Fomey i will donate something pretty soon as i allways apreciate work from people creative like yourself .
EDIT: 15 AUD for you Fomey, thank you for your work !
reboot after install of null_16
i have attempted several times now to install the null_16 on my galaxy gear. after each time i attempt to go into the recovery mode to actually install it, it reboots and resets the device. i have read numerous times to flash the null_03_TWRP2.7.tar.md5 file and i have done this with odin and received a pass at the top left of the odin program and then it reboots the galaxy gear. i then install the null_16 file on the root of the sd card directory with wondershare mobilego (left zipped as noted in several videos i have watched) after this i remove device from charging device and this is when i try to go to recovery modeto install. after getting to recovery and holding power button for approximately 3 seconds and release this is when it reboots and has reset itself. any help would greatly be appreciated and yes it is rooted with supersu. I am sure i am doing something wrong but not sure what.
ernie36564 said:
i have attempted several times now to install the null_16 on my galaxy gear. after each time i attempt to go into the recovery mode to actually install it, it reboots and resets the device. i have read numerous times to flash the null_03_TWRP2.7.tar.md5 file and i have done this with odin and received a pass at the top left of the odin program and then it reboots the galaxy gear. i then install the null_16 file on the root of the sd card directory with wondershare mobilego (left zipped as noted in several videos i have watched) after this i remove device from charging device and this is when i try to go to recovery modeto install. after getting to recovery and holding power button for approximately 3 seconds and release this is when it reboots and has reset itself. any help would greatly be appreciated and yes it is rooted with supersu. I am sure i am doing something wrong but not sure what.
Click to expand...
Click to collapse
Read.
ernie36564 said:
i have attempted several times now to install the null_16 on my galaxy gear. after each time i attempt to go into the recovery mode to actually install it, it reboots and resets the device. i have read numerous times to flash the null_03_TWRP2.7.tar.md5 file and i have done this with odin and received a pass at the top left of the odin program and then it reboots the galaxy gear. i then install the null_16 file on the root of the sd card directory with wondershare mobilego (left zipped as noted in several videos i have watched) after this i remove device from charging device and this is when i try to go to recovery modeto install. after getting to recovery and holding power button for approximately 3 seconds and release this is when it reboots and has reset itself. any help would greatly be appreciated and yes it is rooted with supersu. I am sure i am doing something wrong but not sure what.
Click to expand...
Click to collapse
Download mk7 for your country.... I don't care if you are already on it just do it! Flash with Odin then flash twrp recovery..... Use adb to boot to recovery....... Trust me it works!
Sent from my Note 3 SM-N900A rooted by Designgears
OMG i got it running!
thanks so much for all the work done with this rom... Everything seems to be running perfect...
At first i couldn't get it to flash properly... I was trying everything. Took hours to initially get the recovery going. It ended up being a driver issue and after a lot of reading and troubleshooting i was finally able to get it up and running.
One question that i have that i couldn't find the answer too... Is there any way to have the watch widget (either the stock clocks or watch styler) appear as a full screen widget without the launcher or the status bar at the top... yet keep the status bar and launcher on the other pages? I am assuming that i can't do it after reading countless of pages... Because i do like the full screen watch face.
Thanks again for all the hard work!
---------- Post added at 09:05 PM ---------- Previous post was at 09:00 PM ----------
eroracing said:
Download mk7 for your country.... I don't care if you are already on it just do it! Flash with Odin then flash twrp recovery..... Use adb to boot to recovery....... Trust me it works!
Sent from my Note 3 SM-N900A rooted by Designgears
Click to expand...
Click to collapse
I had to follow this step in order to get the recovery to stick. No matter what i did including flashing the stock recovery then flashing twrp i couldnt get it going until i did this:
almulder1092 said:
Installing Null_ TWRP: (Version as of this tutorial is Null_ 03 TWRP)
Thanks to fOmey for this Null_ TWRP
Installing Null_ TWRP:
Preparation:
Download Null_ TWRP - fOmey
READ THE NULL_ TWRP Original Post
Installation:
Put your Gear into Download Mode
Connect your Gear to you PC.
Open Odin
Click on the PDA Button
Locate the Null_ TWRP file and select it. (It should be a .md5 file, if it is zipped, then unzip it)
Press Start
Once it is completed it will reboot the gear.
Null Quote:
If you find the recovery is not sticking & your Gear wipes when attempting to access recovery after flashing, you must root your Gear prior to installing TWRP again & Run the following commands in ADB:
*NOTE* You will gave to accept a supersuser request popup when executing "SU" command
*NOTE 2* Probably a good idea to run this prior to first installation (To save time)
Code:
$ adb shell
$ su
# mount -o rw,remount /dev/block/mmcblk0p20 /system
# rm /system/recovery-from-boot.p
ADB stands for Android Debug Bridge
If needed "ADB" can be found here on xda - Thanks to shimp208
.[/CENTER]
Click to expand...
Click to collapse
gypsydigi said:
OMG i got it running!
thanks so much for all the work done with this rom... Everything seems to be running perfect...
At first i couldn't get it to flash properly... I was trying everything. Took hours to initially get the recovery going. It ended up being a driver issue and after a lot of reading and troubleshooting i was finally able to get it up and running.
One question that i have that i couldn't find the answer too... Is there any way to have the watch widget (either the stock clocks or watch styler) appear as a full screen widget without the launcher or the status bar at the top... yet keep the status bar and launcher on the other pages? I am assuming that i can't do it after reading countless of pages... Because i do like the full screen watch face.
Thanks again for all the hard work!
---------- Post added at 09:05 PM ---------- Previous post was at 09:00 PM ----------
I had to follow this step in order to get the recovery to stick. No matter what i did including flashing the stock recovery then flashing twrp i couldnt get it going until i did this:
Click to expand...
Click to collapse
You cannot do what you are asking.... But you can set clock widget. Use Nova settings to hide notification bar, dock and scroll indicators then use gesture and button settings to create gesture to accommodate just about anything! I have swype down to open notification bar..... Swipe up open notification app.... Double tap opens app drawer and 2 finger Swipe up opens my dialer! Just set widget long press and resize to full screen. You may have to adjust colums and rows in Nova settings to accommodate whatever widget you are using in order to center properly. Hope this helps!
Sent from my Note 3 SM-N900A rooted by Designgears
On the newest release (16) there is support for custom boot animation and includes the null boot animation. Is that a part of the aroma installer or is the custom null boot animation a part of the rom that you cannot remove? I'd rather stick with the stock if you don't mind.
So like many of you who were running the awesome LPV build for the past few months and just recently tried updating to official Lollipop (LRX21O) have likely run into issues on first boot (black screen with only a back button). In this state/issue the phone will respond to "OK Google" but nothing else. The pulldown shade will also be present but show nothing. The issue appears to be related to the lock screen. The following is how I fixed my issue, and I will be looking at this thread to try and update the OP as we pin down the EXACT issue, but I believe I have a fix:
NOTE: If you've already updated and are AT the black screen, I hope you have a backup to restore as you'll need to revert to change some settings. If not, you may find flashing the system.img or zip of your old build (LPV) allows you access to your phone again to access these settings.
1. Restore backup or revert if necessary so you can access settings BEFORE flashing LRX21O.
2. Settings-Security-Screen Lock Make sure you have one set other than swipe so you can perform the next step (we will change this back later)
3. Go to "Trust Agents" on the same screen (Security) and turn OFF SmartLock
4. Go back to screen lock, now select SWIPE (or none if present, but I don't believe it's an option on most)
5. (Optional) I chose to both enable USB debugging as well as going into SuperSU (if present) and setting it to grant all requests. I did not need this, however if you're having issues it may help your troubleshooting to have root adb access.
6. With your lock screen set to swipe and smart lock off, now try flashing LRX21O, followed by a custom kernel (or boot.img if you have it) and/or root in that order if you'd like.
7. Upon boot, it SHOULD have resolved the black-screen issue. I did still have the "non-working home button" issue that was quickly resolved by running the setup wizard again with the following command via adb:
adb shell am start -n com.google.android.setupwizard/.SetupWizardTestActivity
When it asks about restoring backups or setting up as a new device, choose set up as new device. The "Restore" would simply re-download and restore apps that are already installed. "Set up as new device" simply tells setup to do nothing, which is fine, because all your data is already there
8. SDcard Fix (root required): If you have issues seeing SD card content, use these ADB commands below (credit to rootSU here
su
restorecon -FR /data/media/0
That's IT! You should be set. I love dirty flashing (I know everyone hates it because yes, it does cause a lot more chatter in the forums, but that's half the fun ) and problem solving. Everytime I see someone claiming they fixed a problem by factory resetting I'm thinking "...that's like saying you fixed your car by buying a new car". I hope I this makes other's lives a little easier
Full Tutorial and clean Rom by @demenicis http://www.needrom.com/download/zte-axon-mini-model-b2016-only/
You can search on this thread to find the files for Android 6.0.1
You need to root and install TWRP for flashin Android Marshmallow
I recently bought a ZTE Axon Mini here in Europe. It is a pretty good phone, the only problem is the software part which has some lag and UI problems.
They certainly can be fixed with a custom rom or rooting and doing changes or by ZTE themselves.
Here I will write the problems
1) The touch responsiveness could be more fast and snappy, when scrolling etc.
2) random lag occurs from time to time, Some other lag issues with the background apps closing etc.
3) Notifications sometimes do not show at all even when keeping aps on whitelist (deactivate mi assistant to solve this)
4) Dolby Audio gets deactivated almost every time you use headhones .
5) Marshmallow release anytime soon?
6) the UI is too heavy for the phone, most stock apps have issues
7) You cannot adjust brightness inside camera app on auto mode, the HDR mode is really not good ( too blurry)
Click to expand...
Click to collapse
Most of these issues have been fixed on 6.0.1 Rom (search thread)
Summary and further tweaks by @demenicis http://www.needrom.com/download/zte-axon-mini-model-b2016-only/
Edit 1--------------------------------------------------
Root method has been found and works on all axon mini models Android 5.1.1
Credit for finding @orbitz52 and @Heze85
http://www.mgyun.com:81/thread-48100-1-1.html
Just translate the page on Chrome and follow the instructions
For 6.0.1 Marshmallow Root you need to have custom recovery and flash supersu via recovery
Edit 2--------------------------------------------------------
Notification issue has been solved (read pages 1-3)
!!IMPORTANT NEWS!!
Custom recovery for axon mini by @Bormental
TWRP 3.0.2 for ZTE Axon mini unofficial.
It works in all Axon mini mods (B2015 and B2016 with or without "Force Touch".
Installation manual:
1. ROOT device (see the manual in this thread).
2. Download the archive with TWRP.
3. Unzip twrp.img to phone's internal storage.
4. Install any terminal emulator from Google Play and open it.
5. Paste these lines one by one to terminal:
Code:
su
dd if=/dev/block/bootdevice/by-name/recovery of=/sdcard/stock_recovery.img
dd of=/dev/block/bootdevice/by-name/recovery if=/sdcard/twrp.img
6. Keep the file stock_recovery.img in safe place. It is your stock recovery image.
7. Now TWRP is installed. You can run it by holding vol+ and power button when phone is off or just reboot your phone while holding the vol+ button.
HOW TO ENTER RECOVERY WHEN ON BOOTLOOP WITHOUT EMPTYING THE BATTERY by @Crisvendetta
1. Hold volume up and power button the whole time of this procedure until the moment said below
2. Keep holding, the first time the device will be stuck on boot logo for 10 seconds and restart
3.Keep holding until the device is stuck on boot loop for 5-6 seconds before powering down.
4. RELEASE BUTTONS AS SOON AS SCREEN SHUTS DOWN ON THE 5 SECOND BOOT
5.Now Device is shut down
6. You can enter recovery normally by holding power plus volume+
What to do if the phone with android 6.0.1 is suddenly switching off during backup, restore, copying heavy files or installing ROM:
CLICK TO HIDE CONTENT
Install aboot image from 5.1.1
Reboot recovery
Make all needed operations
Return back aboot image from 6.0.1 before rebooting to system
Attention! Android will boot only with proper aboot image installed!
WARNING! Your warranty is now void! Any operation with firmware can break your phone!
Special thanks
1) @Bormental
2) @orbitz52
3) @demenicis
Hi,
I can't confirm 1), actually my device runs smooth. I have the Build Version ZTE B2016 FTV1.0.0B01.0
2) random lags occurs, but rare.
3) it seems that this is an issue by the power saving management, I also have some issues with it. I'm actually testing autostart and whitelisting for background the important apps like messengers.
4) I didn't tested this yet
5) I read something arround February this year.
If you google for root, you can find some work instructions, but OTA will be deactivated. I have not tested it yet, will give the phone a few months and ZTE for the update
Issues
I have a lot of problems with this phone. Sometimes apps doesn't work. Most of the times I can't recive notifications, sometimes is laggy, some options doesn't work or change to it's inicial configuration, force touch is not accurate.... A lot! Please ZTE do something!. BTW, how can I solve the notification problem?!
Thank you so much
Korgan1983 said:
Hi,
I can't confirm 1), actually my device runs smooth. I have the Build Version ZTE B2016 FTV1.0.0B01.0
2) random lags occurs, but rare.
3) it seems that this is an issue by the power saving management, I also have some issues with it. I'm actually testing autostart and whitelisting for background the important apps like messengers.
4) I didn't tested this yet
5) I read something arround February this year.
If you google for root, you can find some work instructions, but OTA will be deactivated. I have not tested it yet, will give the phone a few months and ZTE for the update
Click to expand...
Click to collapse
The notification part is the worst until now.
What I would add is that the camera app is unstable. It gets randomly on night mode and could be improved, on the focus and autoexposure part .
Overall the phone is great, it needs to be improved on the software part and I believe it could succeed and give ZTE a even better reputation
Now on the updates, does anyone know when marshmallow will be released for the Axon mini?
Notification
Crisvendetta said:
The notification part is the worst until now.
What I would add is that the camera app is unstable. It gets randomly on night mode and could be improved, on the focus and autoexposure part .
Overall the phone is great, it needs to be improved on the software part and I believe it could succeed and give ZTE a even better reputation
Now on the updates, does anyone know when marshmallow will be released for the Axon mini?
Click to expand...
Click to collapse
Yes, the notification part is the worse. It should be solved in the coming days...
ZTE AXON notifications FIX !
Aitex10 said:
Yes, the notification part is the worse. It should be solved in the coming days...
Click to expand...
Click to collapse
Ok guys, I have solved the notification issue, it seems ZTE had optimized the system for app cleaning, it even cleaned out some resources whatsapp and other apps such as this need to send notifications. Here is the solution for the ZTE AXON (all series)
1. Go inside settings /Power manager /manage background . Here deselect all the apps that you want to send notifications.
2. settings/power manager/auto start manager . Here select all the apps that you want to send notifications.
3. go inside Mi-assistant /Acceleration/ Whitelist . Here select all the apps that you want to send notifications. Otherwise, disable Mi-Assistant from the settings/apps.
It seems the tap to accelerate would remove all resources from these apps, With these changes, every notification will come as usual. CHEERS!!
Crisvendetta said:
Ok guys, I have solved the notification issue, it seems ZTE had optimized the system for app cleaning, it even cleaned out some resources whatsapp and other apps such as this need to send notifications. Here is the solution for the ZTE AXON (all series)
1. Go inside settings /Power manager /manage background . Here deselect all the apps that you want to send notifications.
2. settings/power manager/auto start manager . Here select all the apps that you want to send notifications.
3. go inside Mi-assistant /Acceleration/ Whitelist . Here select all the apps that you want to send notifications.
It seems the tap to accelerate would remove all resources from these apps, With these changes, every notification will come as usual. CHEERS!!
Click to expand...
Click to collapse
How come Axon on 5.1.1 doesn't have Power manager or Mi-assisant?
Crisvendetta said:
Ok guys, I have solved the notification issue, it seems ZTE had optimized the system for app cleaning, it even cleaned out some resources whatsapp and other apps such as this need to send notifications. Here is the solution for the ZTE AXON (all series)
1. Go inside settings /Power manager /manage background . Here deselect all the apps that you want to send notifications.
2. settings/power manager/auto start manager . Here select all the apps that you want to send notifications.
3. go inside Mi-assistant /Acceleration/ Whitelist . Here select all the apps that you want to send notifications.
It seems the tap to accelerate would remove all resources from these apps, With these changes, every notification will come as usual. CHEERS!!
Click to expand...
Click to collapse
Also remove the accelerator settings inside the mi assistant / software settings
Dooosu said:
How come Axon on 5.1.1 doesn't have Power manager or Mi-assisant?
Click to expand...
Click to collapse
I am also on 5.1.1.
Notification works better with enabling autostart and enabling background settings. I have disabled the Accelerator / Mi-Assistant, Android has its own power management.
Hello,
i did not find MI-Assistant, where exctely?
Crisvendetta said:
Also remove the accelerator settings inside the mi assistant / software settings
Click to expand...
Click to collapse
Hi,
where can i finf mi Assistant??????
ridowski said:
Hi,
where can i finf mi Assistant??????
Click to expand...
Click to collapse
Which version of Axon do you have ?
It seems the ZTE Axon A1R doesn't have mi-assitant or even power manger/ background manager, and it's on 5.1.1
Guess no way to get that without unlocking the bootloader?
Crisvendetta said:
Ok guys, I have solved the notification issue, it seems ZTE had optimized the system for app cleaning, it even cleaned out some resources whatsapp and other apps such as this need to send notifications. Here is the solution for the ZTE AXON (all series)
1. Go inside settings /Power manager /manage background . Here deselect all the apps that you want to send notifications.
2. settings/power manager/auto start manager . Here select all the apps that you want to send notifications.
3. go inside Mi-assistant /Acceleration/ Whitelist . Here select all the apps that you want to send notifications.
It seems the tap to accelerate would remove all resources from these apps, With these changes, every notification will come as usual. CHEERS!!
Click to expand...
Click to collapse
Tried this on mine and this made no difference in fact in an attempt to combat the delayed notifications I had done the above and unfortunately in my case made no difference? If anyone has any other suggestions please let me know.
hoppi05 said:
Tried this on mine and this made no difference in fact in an attempt to combat the delayed notifications I had done the above and unfortunately in my case made no difference? If anyone has any other suggestions please let me know.
Click to expand...
Click to collapse
Inside mi assistant remove the auto run on startup and then press exit the mi assistant.
This last few days every notification has shown on time, I did a fresh factory reset and the applied all the settings. Don't know if that would help everyone but I am satisfied until now
I didn't do a factory reset and stopped the Mi-Assistant. Notifications work well after that. But don't forget to do Step 1 and 2, that is still neccessary beside of stopping the Assistant.
I was wondering what is the difference between zte b2015 and b2016 models. I have the b2016 but it seems nothing changes with b2015.
My geekbench 3 scores single core 712 multicore 3107
Antutu 38051 .
Korgan1983 said:
I didn't do a factory reset and stopped the Mi-Assistant. Notifications work well after that. But don't forget to do Step 1 and 2, that is still neccessary beside of stopping the Assistant.
Click to expand...
Click to collapse
Indeed, disabling Mi-assistant together with the steps mentioned, solves all notification issues
Dooosu said:
How come Axon on 5.1.1 doesn't have Power manager or Mi-assisant?
Click to expand...
Click to collapse
What model is that? Sounds like the US version?
Hi all,
once my S5 mini boots up, it shows "System UI has stopped Working" and shows only my wallpaper. Power button is still working (i.e. shutdown menu appears), home button turns on display, anything else doesn't work.
Here is what I tried without success:
- remove SIM/SD
- go to airplane mode (possible from the menu when holding down power)
- Boot into "safe mode"
- Wipe cache in recovery mode
- use Kies (and Lite) to copy/reset (not working..)
- use Smart Switch to copy data to another phone
What seems to be the problem is the "Google App", according to various posts; e.g. [1, 2, ...]. But I cannot access settings and disable the app.
Is there any way to activate adb without being able to grant permissions from the phone and use it to remove the app? Any other ways to uninstall/reset this particular app?
Any other suggestions?
Thanks in advance!
yyy
Alright, it didn't leave me alone
I managed to get my files by flashing TWRP into recovery and getting contacts2.db (and everything else I needed) with adb pull.
Even wiping the Dalvik / ART Cache and the Cache from TWRP had no effect on the hangup. Even bute-deleting the searchbar-app didnt do nothing.
Godspeed to everyone with the same problem.